Hi, I just downloaded Mageia 2 beta 3 KDE 64 bit liveCD (Europe 1). I checked the checksums, download was perfect. I made a bootable usb (as explained here: https://wiki.mageia.org/en/Installation_Media#Dump_Mageia_ISOs_on_an_USB_stick.3F) and plugged it on a usb3. Grub booted fine. Then whether I choose "Boot Mageia 2 (Cauldron)" or "Install Mageia 2 (Cauldron)", I get the same result: - First I get a splashscreen (I tried to "esc" it to see if I could have interesting load information about the crash, but it just stayed black). - Then I get a console telling me: « dracut Warning: unable to process initqueue dracut Warning: "/dev/disk/by-label/Mageia-2-KDE4-LiveCD" does not exist dracut Warning: "/live/union" does not exist Dropping to debug shell. sh: 0: can't access tty; job control turned off dracut:/# » When plugging the usb to another USB (which is v2), installation or boot works. So I could install this way. I have now a fully working Mageia 2. So ask me any kind of information on my machine if it helps to understand and fix the bug.
CC: (none) => mageia
CC: (none) => mageia, thierry.vignaudComponent: Installer => RPM PackagesSource RPM: (none) => drakcut, draklive
Thomas, I wonder if the USB3 driver modules need to be included in the initrd for it to show up? I have no USB3 h/w to test on so I'm not really sure about this one.
CC: (none) => tmb
draklive should include all modules from bus/usb
Summary: "dracut Warning: unable to process initqueue" on install startup when booting from usb 3 => "dracut Warning: unable to process initqueue" on install startup when booting from USB3Source RPM: drakcut, draklive => draklive
Note that I have highlighted the fact that the failing usb plug is usb3 (otherwise working fine right now under an installed Mageia 2 to read the exact same usb key) while the working one is usb2. There may be another reason which is not about the usb version. Just tell me what to test/try and I will do it, as long as it is not bad for my new laptop or my data. :-)
I just experienced sth. similar *after* installing from dual arch w/ USB2, i586. Is it okay to link to the forum? https://forums.mageia.org/en/viewtopic.php?f=15&t=2267&p=16815#p16815
CC: (none) => callimera.42
I have burned Mageia 2 Beta 3 x86_64 dvd iso into a USB, it boot USB, i select "Install Mageia" and starts detecting step but then doesnt continue and asks me to select a drive list, the USB isnt detected anymore. I have runned in USB 3 and USB 2 and it happens exactly the same. To note that I did burned Beta 2 and all went fine, so is a problem with usb drivers in Beta 3.
CC: (none) => simplew8
@Joe Please open a new bug for your issue. It's a little different (although it does look similar) @Simple do you get the same output as reported in this bug regarding the dracut initqueue and /dev/disk/by-label/... ?
(In reply to comment #6) > @Joe Please open a new bug for your issue. Done. https://bugs.mageia.org/show_bug.cgi?id=5505
The issue might be that draklive is run on mga1 where drakxtools' list_modules.pm doesn't know about usb3? There's an option to use one from chroot. Maybe we lack the following in images-config/draklive: modules => 'bus/usb'
After trying again, and now with a more carefull reading i see that the install doesnt go because it wants to access the DVD, and if i choose "No" it shows a list of drivers to choose. So this problem seams to be a litle different from the one initially described, also if i use ALT+F4 i see some like: ISOFS: cant access the cd media I dont get why the install that starts with a USB then passes to a DVD...
I hit « dracut Warning: unable to process initqueue dracut Warning: "/dev/disk/by-label/Mageia-2-KDE4-LiveCD" does not exist dracut Warning: "/live/union" does not exist Dropping to debug shell. sh: 0: can't access tty; job control turned off dracut:/# » from a Beta3 Kde Asia Live CD (from the CD, not dumped on USB). Only thing unusual I did, is to add xdriver=nouveau in command line (but it's not related).
CC: (none) => malo
@Simple: you should open a separate bug report.
CC: callimera.42 => (none)
Hi, This bug was filed against cauldron, but we do not have cauldron at the moment. Please report whether this bug is still valid for Mageia 2. Thanks :) Cheers, marja
Keywords: (none) => NEEDINFO
2 months later, no reply, closing as old Feel free to reopen if this issue was still valid for Mageia 2 final
Status: NEW => RESOLVEDCC: (none) => marja11Resolution: (none) => OLD
Hey all. Not reopening, but just to say that I finally reinstalled a Mageia 2 (finale version) and used the usb3 port again for the test. I had no problem! I changed the RESOLVED OLD into a RESOLVED FIXED, as it is more appropriate. I hope that's ok! :-) Thanks.
Resolution: OLD => FIXED
(In reply to comment #14) > > I changed the RESOLVED OLD into a RESOLVED FIXED, as it is more appropriate. I > hope that's ok! :-) It sure is OK, thanks for correcting it :)