Description of problem: I have a realtek RTL 8125 2.5g ethernet card. It worked fine with mageia 8. It worked fine with early versions of mageia 9. I updated all the rpm's as of today, and I have kernel 6.5.11. The realtek card is detected in the network control center, but when I plug ethernet into it, DHCP doesn't configure an IP address. The card works fine today under windows 10. Fortunately, I have other ethernet ports, so I can still use the computer, though slowly. Version-Release number of selected component (if applicable): How reproducible: 100% Steps to Reproduce: 1. boot 2. no DHCP from realtek card 3. plug ethernet into gigabit ethernet, and cry
Sorry to hear about this. Can we take it that the problem happened just with kernel 6.5.11 ? To give some Ethernet info, please post O/P of: $ inxi -n $ lspci | grep thernet or $ lsusb | grep thernet and also add an attachment to the bug with the O/P of: $ journalctl -b --no-hostname | grep eth which should show all Ethernet related journal messages. There is a new kernel in core/Updates_Testing: kernel-6.5.13-1.mga9 If you can get that, it would be worth a try: bug 32623 Meanwhile, assigning to kernel team.
Assignee: bugsquad => kernel
inxi -n - hangs lspci | grep thernet 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 05) 03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller lsusb | grep thernet produces no output journalctl -b --no-hostname | grep eth Dec 14 11:19:25 kernel: r8169 0000:04:00.0 eth1: RTL8125A, 00:8e:25:71:02:f5, XID 609, IRQ 36 Dec 14 11:19:25 kernel: r8169 0000:04:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] Dec 14 11:19:25 kernel: igb 0000:03:00.0: added PHC on eth0 Dec 14 11:19:25 kernel: igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:25:90:d8:df:0a Dec 14 11:19:25 kernel: igb 0000:03:00.0: eth0: PBA No: 011000-000 Dec 14 11:19:25 kernel: igb 0000:03:00.0 eno1: renamed from eth0 Dec 14 11:19:25 kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:d8:df:0b Dec 14 11:19:25 kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection Dec 14 11:19:25 kernel: e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 0100FF-0FF Dec 14 11:19:25 kernel: r8169 0000:04:00.0 enp4s0: renamed from eth1 Dec 14 11:19:25 kernel: e1000e 0000:00:19.0 eno2: renamed from eth0
the realtek 2.5g network card works perfectly with the kernel 6.4.16-desktop-3.mga9 99% sure it is a kernel issue.
6.5.13 does *not* fix the problem.
Have you tried the new firmwares? Bugs 32679, 32680 Also, you could try the linus variant of latest kernel - linus is less patched by us.
CC: (none) => fri
I am not sure about the new firmware, but my system was fully patched today (Jan 1 2024) Also, when shutting down the system, systemd hangs on something related to ip and after over 500 seconds, I manually powered it down. I presume it is related to the networking issue I am having. When I use an older kernel with working networking, the system shuts down normally.
The firmware updates are still in testing repos, see the bugs.
Working now with kernel 6.6.14
Thank you for the feedback :)
Resolution: (none) => FIXEDStatus: NEW => RESOLVED