Description of problem: Testing mga3 RC on an older stock HP dx5150. The default video configuration does not work. Reboot after installation dumps me back to cli. There is an error there but I did not write it down. Changing to VESA driver enables the graphical interface to then work. XFdrake always want to select "ATI Radeon HD 4870 and earlier". I think this was what the installer had set too. It does not work. It was determined in the above forum thread that the X300 was not supported by that driver. This chipset may need to be blacklisted or in some way forced to use the VESA driver. Version-Release number of selected component (if applicable): Mageia 3 Release Candidate How reproducible: Simply installing the mga3 RC on this hardware results in this problem. Setting this to MAJOR as it will leave new installations people may try non-functional at least from a GUI perspective. Reset as you see fit. Reproducible: Steps to Reproduce:
Any improvement with the last updates ?
CC: (none) => anssi.hannula
"ATI Radeon HD 4870 and earlier" means _all_ Radeon cards until Radeon HD 4870. This includes Radeon X300 which is supported by the driver, including OpenGL 3D support. I agree the naming may be confusing, but it won't be changed for mga3. Can you get us the contents of "/var/log/Xorg.0.log" and the output of "dmesg" (use "dmesg > dmesg.txt" to save to file) after the failure?
Created attachment 3898 [details] dmesg.txt
Created attachment 3899 [details] Xorg.9.log
Attached both of the requested files. The latter was generated by attempting to set the ATI Radeon HD 4870 and earlier driver from XFdrake followed by a click on the test button. It fails with the no screens found error (that I thought I had mentioned in the bug but which I see I did not). I guess after having talked about this so much in the forums I forgot to put it in the bug report. Sorry for the missing information.
Created attachment 3900 [details] Xorg.0.log
Have installed latestest updates and rebooted as suggested. No difference.
Works here: mga3 with "ATI Radeon HD 4870 and earlier" works for me on Thinkpad T43 2668-44G, and have done so a couple months since i installed mga3 beta something on it. MCC hardware section describe it as "RV370/M22 [Mobility Radeon X300]". Further down it say "Unit Sub-ID: 0x056e." Maybe we have different chip versions? Or you miss some firmware?
CC: (none) => fri
The system has the following firmware installed. This the correct package?? radeon-firmware-20130421-1.mga3.nonfree
Wanted to note that this is not a problem with Mageia 3 i586 release DVD. The installer picked the same ATI Radeon HD 4870 and earlier that dual arch CD installer used - but it works whereas before it did not. Could x86_64 be the difference? The dual arch CD I tested picked a 64 bit installation - which is appropriate for the hardware - while I chose the 32 bit i586 DVD for the final release since I want to use it on more than one machine.
Closing as OLD (and comment #10 is encouraging about the status of the issue). Please reopen if needed.
Status: NEW => RESOLVEDResolution: (none) => OLD