In my netbook msi u110, the installer and the harddrake2 installs me the package ralink-firmware for my wifi. the problem is that i cannot be connected to my router with drakconnect (it does nt find any access point). i try to add manualy the parametres of the router and it can be connected but after 1 or 2 minutes it disconnects, and i cannot be reconnected except if i reboot. I installed the package rt2860-firmware-26-1.mga1 and i dont have any problem with the connexion Kernel: 3.3.8-netbook-2.mga2 lspcirake rt2800pci : Ralink corp.|RT2790 Wireless 802.11n 1T/2R PCIe [NETWORK_OTHER] sata_sil24 : Silicon Image, Inc.|SiI 3531 [SATALink/SATARaid] Serial ATA Controller [STORAGE_OTHER] (rev: 01) pata_sch : Intel Corporation|System Controller Hub (SCH Poulsbo) IDE Controller [STORAGE_IDE] (rev: 07) lpc_sch : Intel Corporation|System Controller Hub (SCH Poulsbo) LPC Bridge [BRIDGE_ISA] (rev: 07) ehci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB EHCI #1 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #3 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #2 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #1 [SERIAL_USB] (rev: 07) shpchp : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 2 [BRIDGE_PCI] (rev: 07) shpchp : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 1 [BRIDGE_PCI] (rev: 07) snd_hda_intel : Intel Corporation|System Controller Hub (SCH Poulsbo) HD Audio Controller (rev: 07) Card:Intel Poulsbo US15W (GMA500): Intel Corporation|System Controller Hub (SCH Poulsbo) Graphics Controller [DISPLAY_VGA] (rev: 07) unknown : Intel Corporation|System Controller Hub (SCH Poulsbo) [BRIDGE_HOST] (rev: 07) hub : Linux 3.3.8-netbook-2.mga2 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.3.8-netbook-2.mga2 uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.3.8-netbook-2.mga2 uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.3.8-netbook-2.mga2 uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
Created attachment 3784 [details] Confirmation Similar problems. I'm able to connect to my WLAN after booting from the Live CD, or from an installed system sourced from a Live CD, but am unable to do so after booting from an installed system sourced from the full distribution DVD. I used the same config parameters in both cases. 2 different Ralink usb adapters behave similarly: DLink WUA-1340 Brand X
CC: (none) => unclesudz
Correction - I can't connect at all from installed system sourced from full distribution DVD.
Hardware: i586 => x86_64
Well you need to download the rpm from somewhere else. This will change in mga3 as we added nonfree drivers even in dvd isos.
Cannot reproduce it any more
Status: NEW => RESOLVEDResolution: (none) => WORKSFORME