Description of problem: The card can not used with this two applications. When launched in console: $ tvtime Utilise tvtime 1.0.2. Lit la configuration depuis /etc/tvtime/tvtime.xml I/O warning : failed to load external entity "/root/.tvtime/tvtime.xml" xvoutput: No XVIDEO port found which supports YUY2 images. *** tvtime requires hardware YUY2 overlay support from your video card *** driver. If you are using an older NVIDIA card (TNT2), then *** this capability is only available with their binary drivers. *** For some ATI cards, this feature may be found in the experimental *** GATOS drivers: http://gatos.souceforge.net/ *** If unsure, please check with your distribution to see if your *** X driver supports hardware overlay surfaces. $ xawtv This is xawtv-3.99.rc6, running on Linux/x86_64 (3.3.1-desktop-2.mga2) xinerama 0: 1400x1050+0+0 WARNING: No DGA direct video mode for this display. WARNING: keeping fbuf pitch at: 5600, as no base addr was detected WARNING: couldn't find framebuffer base address, try manual configuration ("v4l-conf -a <addr>") v4l2: WARNING: framebuffer base address mismatch v4l2: me=(nil) v4l=(nil) ioctl: VIDIOC_QBUF(index=0;type=VIDEO_CAPTURE;bytesused=0;flags=0x0 [];field=ANY;;timecode.type=0;timecode.flags=0;timecode.frames=0;timecode.seconds=0;timecode.minutes=0;timecode.hours=0;timecode.userbits="";sequence=0;memory=MMAP): Périphérique ou ressource occupé libv4l2: error turning on stream: Périphérique ou ressource occupé ioctl: VIDIOC_STREAMON(int=1): Périphérique ou ressource occupé ioctl: VIDIOC_QBUF(index=0;type=VIDEO_CAPTURE;bytesused=0;flags=0x0 [];field=ANY;;timecode.type=0;timecode.flags=0;timecode.frames=0;timecode.seconds=0;timecode.minutes=0;timecode.hours=0;timecode.userbits="";sequence=0;memory=MMAP): Périphérique ou ressource occupé libv4l2: error dequeuing buf: Argument invalide ioctl: VIDIOC_DQBUF(index=0;type=VIDEO_CAPTURE;bytesused=0;flags=0x0 [];field=ANY;;timecode.type=0;timecode.flags=0;timecode.frames=0;timecode.seconds=0;timecode.minutes=0;timecode.hours=0;timecode.userbits="";sequence=0;memory=MMAP): Argument invalide
Created attachment 1990 [details] lspcidrake -v and dmesg
I precise that xawtv displays a black screen which is dead.
Hi, This bug was filed against cauldron, but we do not have cauldron at the moment. Please report whether this bug is still valid for Mageia 2. Thanks :) Cheers, marja
Keywords: (none) => NEEDINFO
Please report whether this bug is still valid for Mageia 2. Thanks :) Cheers, Roelof
CC: (none) => r.wobben
Mageia 3 comes with kernel drivers for PCI devices 109e:036e and 109e:0878. Are you able to get the card to work with any other software besides those two? Do you get a picture in test.jpg after running the command: gst-launch-1.0 v4l2src device=/dev/video0 num-buffers=1 ! jpegenc ! filesink location=test.jpg Change /dev/video0 to be the video device name of your capture card, and try gst-launch-0.10 if you don't have the one above.
CC: (none) => dan
Since there are insufficient details provided in this report for us to investigate the issue further, and we have not received feedback to the information we have requested above, we will assume the problem was not reproducible, or has been fixed in one of the updates we have released for the reporter's distribution. Users who have experienced this problem are encouraged to upgrade to the latest update of their distribution, and if this issue turns out to still be reproducible in the latest update, please reopen this bug with additional information. Closing as OLD.
Status: NEW => RESOLVEDCC: (none) => nicResolution: (none) => OLD