I install MAGEIA with boot.iso in FTP After licence and loading ide driver, the system ask for other device. If I continue there is : An error occured - no valid devices where found on which to create new filesystems. Please check your hardware for the cause of this problem. This problem appear with two PC. I verified the HD, there are OK.
Created attachment 1960 [details] report.bug file This file comes from : CTRL-ALT-F >> bug in an USB stick.
I see * partitions ******************************************************************************** major minor #blocks name 7 0 50092 loop0 8 32 1006592 sdc 8 33 1005568 sdc1 * id2hd: * id2edd: 0x1f2e25d8=>/sys/firmware/edd/int13_dev80 * error: Une erreur est survenue : aucun périphérique valide n'a été trouvé pour créer de nouvelles partitions. Veuillez vérifier votre matériel. at /usr/lib/libDrakX/fs/any.pm line 17. * An error occurred while getting the geometry of block device /dev/sda: No medium found * An error occurred while getting the geometry of block device /dev/sdb: No medium found * HDIO_GETGEO on /dev/sdc succeeded: heads=32 sectors=62 cylinders=1014 start=0 * id2hd: 0x000b74e4=>sdc * id2edd: 0x1f2e25d8=>/sys/firmware/edd/int13_dev80 * test_for_bad_drives(/dev/sdc on sector #61) * running: blkid -o udev -p /dev/sdc * running: blkid -o udev -p /dev/sdc * found a dos partition table on /dev/sdc at sector 0 * guess_geometry_from_partition_table sdc: 1989/23/44 * sdc: no valid geometry guessed from partition table * running: blkid -o udev -p /dev/loop0 * blkid gave: squashfs * running: blkid -o udev -p /dev/sdc1 * blkid gave: vfat 1DE0-F6F2 * running: blkid -o udev -p /dev/sdc1 * blkid gave: vfat 1DE0-F6F2 Any ideas ?
CC: (none) => pterjan, thierry.vignaudSource RPM: (none) => drakx-installer-stage2
fdisk recognize my HD : [root@localhost jacques]# fdisk -l Disque /dev/sda : 320.1 Go, 320072933376 octets 255 têtes, 63 secteurs/piste, 38913 cylindres, total 625142448 secteurs Unités = secteur de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Identifiant de disque : 0x1f2e25d8 Périphérique Amorce Début Fin Blocs Id Système /dev/sda1 2048 27265023 13631488 27 TFS WinRE masquée /dev/sda2 27265024 110061314 41398145+ 7 HPFS/NTFS/exFAT /dev/sda3 110061315 625137344 257538015 5 Ãtendue /dev/sda5 110061378 355887944 122913283+ b W95 FAT32 /dev/sda6 355888008 438060419 41086206 83 Linux /dev/sda7 438060483 520666649 41303083+ 83 Linux /dev/sda8 520666713 603417464 41375376 83 Linux /dev/sda9 603417528 606614399 1598436 82 partition d'échange Linux / Solaris /dev/sda10 * 606617600 625137344 9259872+ 83 Linux [root@localhost jacques]#
It recognizes it on your system but it doesn't seem to in the installer. Maybe a missing driver in the installer. Can you post the output of lspcidrake -v on your system? During the installation it lists: ide_pci_generic : nVidia Corporation|MCP61 SATA Controller [STORAGE_IDE] (subv:1025 subd:0153) ide_pci_generic : nVidia Corporation|MCP61 SATA Controller [STORAGE_IDE] (subv:1025 subd:0153) Which means it didn't find a specific driver.
Keywords: (none) => NEEDINFO
[root@localhost jacques]# lspcidrake -v k8temp : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] Miscellaneous Control [BRIDGE_HOST] (vendor:1022 device:1103) unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] DRAM Controller [BRIDGE_HOST] (vendor:1022 device:1102) unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] Address Map [BRIDGE_HOST] (vendor:1022 device:1101) unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] HyperTransport Technology Configuration [BRIDGE_HOST] (vendor:1022 device:1100) Card:NVIDIA GeForce 6100 to GeForce 360: nVidia Corporation|C61 [GeForce 6150SE nForce 430] [DISPLAY_VGA] (vendor:10de device:03d0 subv:1025 subd:0153) (rev: a2) shpchp : nVidia Corporation|MCP61 PCI Express bridge [BRIDGE_PCI] (vendor:10de device:03e9) (rev: a2) shpchp : nVidia Corporation|MCP61 PCI Express bridge [BRIDGE_PCI] (vendor:10de device:03e9) (rev: a2) shpchp : nVidia Corporation|MCP61 PCI Express bridge [BRIDGE_PCI] (vendor:10de device:03e8) (rev: a2) sata_nv : nVidia Corporation|MCP61 SATA Controller [STORAGE_IDE] (vendor:10de device:03f6 subv:1025 subd:0153) (rev: a2) sata_nv : nVidia Corporation|MCP61 SATA Controller [STORAGE_IDE] (vendor:10de device:03f6 subv:1025 subd:0153) (rev: a2) forcedeth : nVidia Corporation|MCP61 Ethernet [BRIDGE_OTHER] (vendor:10de device:03ef subv:1025 subd:0153) (rev: a2) pata_amd : nVidia Corporation|MCP61 IDE [STORAGE_IDE] (vendor:10de device:03ec subv:10de subd:cb84) (rev: a2) snd_hda_intel : nVidia Corporation|MCP61 High Definition Audio (vendor:10de device:03f0 subv:1025 subd:0153) (rev: a2) unknown : nVidia Corporation|MCP61 PCI bridge [BRIDGE_PCI] (vendor:10de device:03f3) (rev: a1) ehci_hcd : nVidia Corporation|MCP61 USB Controller [SERIAL_USB] (vendor:10de device:03f2 subv:10de subd:cb84) (rev: a3) ohci_hcd : nVidia Corporation|MCP61 USB Controller [SERIAL_USB] (vendor:10de device:03f1 subv:10de subd:cb84) (rev: a3) unknown : nVidia Corporation|MCP61 Memory Controller [MEMORY_RAM] (vendor:10de device:03f5 subv:1025 subd:0153) (rev: a2) i2c_nforce2 : nVidia Corporation|MCP61 SMBus [SERIAL_SMBUS] (vendor:10de device:03eb subv:1025 subd:0153) (rev: a2) unknown : nVidia Corporation|MCP61 LPC Bridge [BRIDGE_ISA] (vendor:10de device:03e0 subv:10de subd:cb84) (rev: a2) unknown : nVidia Corporation|MCP61 Memory Controller [MEMORY_RAM] (vendor:10de device:03ea subv:10de subd:cb84) (rev: a1) hub : Linux 3.3.1-server-2.mga2 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002) uvcvideo : Logitech, Inc.|Webcam C200 [Video|Video Control] (vendor:046d device:0802) unknown : EPSON|EPSON Scanner (vendor:04b8 device:011f) usb_storage : Generic|USB2.0-CRW [Mass Storage|SCSI|Bulk-Only] (vendor:0bda device:0151) hub : Linux 3.3.1-server-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) [root@localhost jacques]#
OK so it seems the installer did not load sata_nv. I can't look more into it now.
I have the same problem on an other PC : root@webboy:/home/jacques# lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 82) 00:01.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07) 00:01.3 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02) 00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 CardBus Controller (rev 05) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter (rev 31) 02:00.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01) root@webboy:/home/jacques#
Now all is OK.
This is surprising, the installer was not updated yesterday or today.
I used the new boot.iso
The new boot.iso is from 3 days ago, before your report :)
The test was made the 6 april and I verifyed yesterday but I have not seen there is an update of boot.iso the 8. But the mirror twiska seems to not update boot.iso so fast as packages.
OK thanks :)
Keywords: NEEDINFO => (none)Status: NEW => RESOLVEDResolution: (none) => FIXED