Continue from bug https://bugs.mageia.org/show_bug.cgi?id=1811 i cannot resume after suspend (nothing happens) I tried with : pm-{suspend,hibernate} the same result I try with : echo mem|disk > /sys/power/state and i have the message: [root@localhost xenia]# echo mem|disk > /sys/power/state bash: disk : commande introuvable [root@localhost xenia]# lspcidrake rt2860sta : RaLink|RT2860 [NETWORK_OTHER] sata_sil24 : Silicon Image, Inc.|SiI 3531 [SATALink/SATARaid] Serial ATA Controller [STORAGE_OTHER] (rev: 01) pata_sch : Intel Corporation|System Controller Hub (SCH Poulsbo) IDE Controller [STORAGE_IDE] (rev: 07) lpc_sch : Intel Corporation|System Controller Hub (SCH Poulsbo) LPC Bridge [BRIDGE_ISA] (rev: 07) ehci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB EHCI #1 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #3 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #2 [SERIAL_USB] (rev: 07) uhci_hcd : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #1 [SERIAL_USB] (rev: 07) shpchp : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 2 [BRIDGE_PCI] (rev: 07) shpchp : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 1 [BRIDGE_PCI] (rev: 07) snd_hda_intel : Intel Corporation|System Controller Hub (SCH Poulsbo) HD Audio Controller (rev: 07) Card:Intel Poulsbo US15W (GMA500): Intel Corporation|System Controller Hub (SCH Poulsbo) Graphics Controller [DISPLAY_VGA] (rev: 07) unknown : Intel Corporation|System Controller Hub (SCH Poulsbo) [BRIDGE_HOST] (rev: 07) hub : Linux 2.6.38.8-netbook-8.mga ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] [root@localhost xenia]# [root@localhost xenia]# uname -a Linux localhost.localdomain 2.6.38.8-netbook-8.mga #1 SMP Fri Nov 4 00:42:04 UTC 2011 i686 i686 i386 GNU/Linux
cc'ing two pm-utils committers
CC: (none) => mageia, marja11, pterjanSource RPM: (none) => pm-utils
Actually the problem is that it does nt suspend at all. It stays to a non wake-up state I tried to suspend after have launched this command: echo LID > /proc/acpi/wakeup which i found here: https://bugzilla.kernel.org/show_bug.cgi?id=16512 then, i have the suspend because now i have the light with the half moon flashing. But after i cannot wake it up and after pressed on the power button once , to wake it up, it remains in the statement in my first message.
@ Dimitrios Did you try without X running, as suggested here https://wiki.mageia.org/en/Triage_guide#Suspend.2FHibernate_issues @ tmb Could this be a kernel issue?
(In reply to comment #3) > @ tmb > > Could this be a kernel issue? and now really cc'ing
CC: (none) => tmb
@ Dimitrios Do you still have the resume issue? If so, did you try without X as suggested in comment 3?
Keywords: (none) => NEEDINFO
Yes, there is always the problem with suspend I can go in a "suspend" state but it does nt comes back I tried out of X , same result I tried the output of the command: [root@localhost xenia]# echo mem|disc > /sys/power/state bash: disc : command not found see first comment : https://bugs.mageia.org/show_bug.cgi?id=4019#c0
CC: (none) => mailinglistsduraph
laptop-mode-tools isn't installed, too, is it?
No, it is not installed
Keywords: NEEDINFO => (none)
I still have the problem in Mageia 2
Version: 1 => 2
(In reply to comment #9) > I still have the problem in Mageia 2 If you have the problem in cauldron too, then please change version to cauldron and put MGA2TOO on the whiteboard. If you know it didn't get fixed in Mageia 1, then please put MGA1TOO on the whiteboard (too)
I have the same problem with an gma500_gfx : Intel Corporation|Atom Processor D2xxx Integrated Graphics Controller [DISPLAY_VGA] (rev: 09) on a ASUS EccPC R11CX running kernel-desktop586-3.3.8-2.mga2â or kernel-netbook-3.3.8-2.mga2 pm-hibernate works fine though.
CC: (none) => egc
Version: 2 => 3
Mageia 3 changed to end-of-life (EOL) status 4 months ago. http://blog.mageia.org/en/2014/11/26/lets-say-goodbye-to-mageia-3/ Mageia 3 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of Mageia please feel free to click on "Version" change it against that version of Mageia and reopen this bug. Thank you for reporting this bug and we are sorry it could not be fixed. -- The Mageia Bugsquad
Status: NEW => RESOLVEDResolution: (none) => OLD
CC: egc => (none)