Created attachment 1140 [details]
CUPS Pinter conf file

Created attachment 1141 [details]
CUPS config file

Hi, thanks for reporting this bug.
Assigned to the package maintainer.

Can you also attach /var/log/cups/error_log ?

Keywords: (none) => Triaged
Assignee: bugsquad => dmorganec

Created attachment 1142 [details]
CUPS ERror log

Pinging, because nothing has happened with this report for more than 3 months, it still has the status NEW or REOPENED.

@ dmorgan

Please set status to ASSIGNED if you think this bug was assigned correctly. If for work flow reasons you can't do that, then please put OK on the whiteboard instead.

CC: (none) => marja11

Please look at the bottom of this mail to see whether you're the assignee of this  bug, if you don't already know whether you are.


If you're the assignee:

We'd like to know for sure whether this bug was assigned correctly. Please change status to ASSIGNED if it is, or put OK on the whiteboard instead.

If you don't have a clue and don't see a way to find out, then please put NEEDHELP on the whiteboard.

Please assign back to Bug Squad or to the correct person to solve this bug if we were wrong to assign it to you, and explain why.

Thanks :)

**************************** 

@ the reporter and persons in the cc of this bug:

If you have any new information that wasn't given before (like this bug being valid for another version of Mageia, too, or it being solved) please tell us.

@ the reporter of this bug

If you didn't reply yet to a request for more information, please do so within two weeks from now.

Thanks all :-D

With Mageia 1 it was possible to use USB printer with box (LiveBox) (ipp://ip_box:631) but with Mageia 2 it is not working.

Priority: Normal => High
Hardware: i586 => All
Severity: normal => major

(In reply to comment #7)
> With Mageia 1 it was possible to use USB printer with box (LiveBox)
> (ipp://ip_box:631) but with Mageia 2 it is not working.

Sorry, priority should be set by the assignee, so setting that back to normal.

Is ipp the only protocol that can be used in your setup, or can you try with lpd?
Over my home network (but different setup than yours) I have very good results printing with lpd.

Discovering the printers (attached to a print server) was never possible for me, though, but that is something that can only be solved by someone with the same hardware as me.

Priority: High => Normal
CC: (none) => doktor5000
Version: 1 => 2
Whiteboard: (none) => MGA1TOO

The use of the printer direct connected on the computer is OK. But the USB printer is connected on the ADSL Box (here a LiveBox from Orange) to share it with all user without direct connection with the printer, the printer was shared.
This configuration worked with Mageia 1 and cups-1.4.6-3.mga1.x86_64.rpm but don't working with Mageia 2 and cups-1.5.2-5.mga2.x86_64.rpm

When i install the cups version 1.4.6-3.mag1 on the Mageia 2 in the place of the 1.5.2-5.mga2 version of cups, i can print of the printer connected on the LiveBox with USB. Here we have a regression of the cups software. No ?

(In reply to comment #10)
> When i install the cups version 1.4.6-3.mag1 on the Mageia 2 in the place of
> the 1.5.2-5.mga2 version of cups, i can print of the printer connected on the
> LiveBox with USB. Here we have a regression of the cups software. No ?

Ouch, I misread (too much haste) when I replied to comment 7, I thought you were the original reporter of this bug. :-(

The cause for your problem must be a different one than for the original reporter of this bug. As you can see, the original reporter filed this report against the versions of Mageia + cups you don't have problems with. So, in fact, your issue should go into a seperate report. Sorry for not having seen this before.

Please file a seperate report about the regression. Here you can read which attachments are useful:
https://wiki.mageia.org/en/Triage_guide#Printer_problems

@ Thomas

Do have this bug in Mageia 2, too?

Version: 2 => 1
Source RPM: cups-1.4.6-3.1.mga1, cups-1.5.2-5.1mga2 => cups-1.4.6-3.1.mga1
Whiteboard: MGA1TOO => (none)

This message is a reminder that Mageia 1 is nearing its end of life. 
In approximately 25 days from now, Mageia will stop maintaining and issuing 
updates for Mageia 1. At that time this bug will be closed as WONTFIX (EOL) if it 
remains open with a Mageia 'version' of '1'.

Package Maintainer: If you wish for this bug to remain open because you plan to 
fix it in a currently maintained version, simply change the 'version' to a later 
Mageia version prior to Mageia 1's end of life.

Bug Reporter: Thank you for reporting this issue and we are sorry that we may not 
be able to fix it before Mageia 1 is end of life.  If you would still like to see 
this bug fixed and are able to reproduce it against a later version of Mageia, 
you are encouraged to click on "Version" and change it against that version 
of Mageia.

Although we aim to fix as many bugs as possible during every release's lifetime, 
sometimes those efforts are overtaken by events. Often a more recent Mageia 
release includes newer upstream software that fixes bugs or makes them obsolete.

--
Mageia Bugsquad

Mageia 1 changed to end-of-life (EOL) status on ''1st December''. Mageia 1 is no 
longer maintained, which means that it will not receive any further security or 
bug fix updates. As a result we are closing this bug. 

If you can reproduce this bug against a currently maintained version of Mageia 
please feel free to click on "Version" change it against that version of Mageia
and reopen this bug.

Thank you for reporting this bug and we are sorry it could not be fixed.

--
Mageia Bugsquad

Status: NEW => RESOLVED
Resolution: (none) => WONTFIX