Description of problem: After selecting the option in grub screen, the screen shows a black square on top of grub display, and stay without action during about 5 min. Then no problem is observed. Version-Release number of selected component (if applicable): Classical Installer 32 bits, Mageia 8 final How reproducible: always
Created attachment 12374 [details] result of bug command at start of the installation
Hi, thanks reporting this. CC'd Martin on this. Does this is the first time a media does this? M7 media not affected? Also, have you tried with a new burned installation media?
CC: (none) => mageia, ouaurelienSummary: Long time after "Install" option, about 5 min => About 5 min there is a black rectangle before timeout after press "Install" on Grub2 install Media in Bios mode
Does pressing the Enter key a number of times speed it up?
(In reply to Martin Whitaker from comment #3) > Does pressing the Enter key a number of times speed it up? I tried that, with also moving mouse. This had no effect.
From the log, the delay is occurring when the kernel is doing USB device discovery. It appears to be unable to read from some of the (possibly internal) USB devices on bus 2. If you have a working system on that machine, what is the output from running 'lsusb' ?
lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard SK-8115 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub If you mean that the problem is with these lines,I don't agree: <6>[ 153.287779] usb 2-7: new low-speed USB device number 4 using ohci-pci <3>[ 153.469775] usb 2-7: device descriptor read/64, error -62 <3>[ 153.753774] usb 2-7: device descriptor read/64, error -62 <6>[ 154.033777] usb 2-7: new low-speed USB device number 5 using ohci-pci <3>[ 154.215775] usb 2-7: device descriptor read/64, error -62 <3>[ 154.504775] usb 2-7: device descriptor read/64, error -62 <6>[ 154.611812] usb usb2-port7: attempt power cycle <6>[ 155.097773] usb 2-7: new low-speed USB device number 6 using ohci-pci <3>[ 155.515778] usb 2-7: device not accepting address 6, error -62 <6>[ 155.689776] usb 2-7: new low-speed USB device number 7 using ohci-pci <3>[ 156.107782] usb 2-7: device not accepting address 7, error -62 <3>[ 156.107822] usb usb2-port7: unable to enumerate USB device This error occured when I plugged a 32 Gb stick to get the bug report. This is not funny neither, but I don't think this is the root problem.
Thus I have tried the ISO on the 32Gb stick. At the first attempt, it doesn't boot on the stick. Then I tried on another USB port, at rear of the box. At this moment, the system boots and enter in the installer WITHOUT delay. This seems to be a limitation of this hardware. Thus closing.
Status: NEW => RESOLVEDResolution: (none) => INVALID