Description of problem: When I have a boot disk which is a nvm SSD drive, the kernel install does not rerun the bootloader The reason is that the /dev/nvme0n1 is not recognized as a hard disk Version-Release number of selected component (if applicable): How reproducible: Steps to Reproduce: 1. install a kernel on a nvm device 2. you get a bootloader not detected error 3.
Please provide the output of fdisk -l /dev/nvme0n1 and blkid /dev/nvme0n1*
Assignee: bugsquad => mageiatoolsKeywords: (none) => NEEDINFOCC: (none) => mageia
(base) [joe@big-apple ~]$ sudo fdisk -l /dev/nvme0n1 [sudo] joe 的密碼： Disk /dev/nvme0n1: 953.89 GiB, 1024209543168 bytes, 2000409264 sectors Disk model: Samsung SSD 960 PRO 1TB Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x29329c96 所用裝置 可開機 Start 結束 磁區 Size Id 類型 /dev/nvme0n1p1 * 2048 301783039 301780992 143.9G 83 Linux /dev/nvme0n1p2 301785088 2000409263 1698624176 810G 5 延伸 /dev/nvme0n1p5 301787136 1951877119 1650089984 786.8G 83 Linux /dev/nvme0n1p6 1951879168 2000408575 48529408 23.1G 82 Linux 交換區/ S (base) [joe@big-apple ~]$ sudo blkid /dev/nvm /dev/nvme0n1 /dev/nvme0n1p2 /dev/nvme0n1p6 /dev/nvme0n1p1 /dev/nvme0n1p5 (base) [joe@big-apple ~]$ sudo blkid /dev/nvme0n1* /dev/nvme0n1: PTUUID="29329c96" PTTYPE="dos" /dev/nvme0n1p1: UUID="bb5c3530-8482-46fc-89d7-ed3058fb5a58" UUID_SUB="23b457bb-84f4-4d04-b0c9-3f809b48794f" BLOCK_SIZE="4096" TYPE="btrfs" PTTYPE="dos" PARTUUID="29329c96-01" /dev/nvme0n1p2: PTUUID="34fae1ad" PTTYPE="dos" PARTUUID="29329c96-02" /dev/nvme0n1p5: LABEL="/home" UUID="b65f0178-859a-4089-b7a5-a37d1ad948c9" UUID_SUB="717672f8-8e6e-4c58-b472-186ffb3070ab" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="29329c96-05" /dev/nvme0n1p6: UUID="bfdd7ebe-9bed-4040-9342-4f94a3f9b257" TYPE="swap" PARTUUID="29329c96-06"
Created attachment 11708 [details] test script I can't reproduce this issue when emulating your setup in VirtualBox. I'm assuming you are using GRUB2. Please run the attached test script by (as root): LC_ALL=C perl detect.pl >& detect.log and attach the resulting log file. (the script is just an extract of the bootloader detection code with some extra debug output)