Advisory: ---------------------------------------- The ethtool package has been updated to version 5.6 to support the newest features in the 5.6 kernel. References: https://git.kernel.org/pub/scm/network/ethtool/ethtool.git/tree/NEWS?h=v5.6 ---------------------------------------- Updated packages in core/updates_testing: ---------------------------------------- ethtool-5.6-1.mga7 from ethtool-5.6-1.mga7.src.rpm
MGA7-64 Plasma on Lenovo B50 No installation issues. This laptop normally connects wifi, so after the update I plugged in the Ethernet cable, used Network Center to disable wifi, checked ethernet was connected and refreshed browser. All OK # ethtool -h ethtool version 5.6 Usage: ethtool [ --debug MASK ] DEVNAME Display standard information about device ethtool [ --debug MASK ] -s|--change DEVNAME Change generic options [ speed %d ] [ duplex half|full ] and more ...... # ethtool -i enp8s0 driver: r8169 version: 5.6.8-desktop-1.mga7 firmware-version: rtl8168g-3_0.0.1 04/23/13 expansion-rom-version: bus-info: 0000:08:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no # ethtool -d enp8s0 RealTek RTL8168g/8111g registers: -------------------------------------------------------- 0x00: MAC Address f0:76:1c:ed:de:00 0x08: Multicast Address Filter 0x00400040 0x00804080 0x10: Dump Tally Counter Command 0x53fbb000 0x00000002 0x20: Tx Normal Priority Ring Addr 0x5107c000 0x00000002 0x28: Tx High Priority Ring Addr 0x00000000 0x00000000 0x30: Flash memory read/write 0x00000000 0x34: Early Rx Byte Count 0 0x36: Early Rx Status 0x00 0x37: Command 0x0c Rx on, Tx on 0x3C: Interrupt Mask 0x003f LinkChg RxNoBuf TxErr TxOK RxErr RxOK 0x3E: Interrupt Status 0x0000 0x40: Tx Configuration 0x53900f80 0x44: Rx Configuration 0x0002cf0e 0x48: Timer count 0x00000000 0x4C: Missed packet counter 0x000000 0x50: EEPROM Command 0x10 0x51: Config 0 0x00 0x52: Config 1 0xcf 0x53: Config 2 0x3c 0x54: Config 3 0x60 0x55: Config 4 0x50 0x56: Config 5 0x02 0x58: Timer interrupt 0x00000000 and more ...... Same behavior as bug 25400, so all seems OK.
Whiteboard: (none) => MGA7-64-OKCC: (none) => herman.viaene
Validating. Advisory in Comment 0.
CC: (none) => andrewsfarm, sysadmin-bugsKeywords: (none) => validated_update
Keywords: (none) => advisoryCC: (none) => tmb
An update for this issue has been pushed to the Mageia Updates repository. https://advisories.mageia.org/MGAA-2020-0129.html
Status: NEW => RESOLVEDResolution: (none) => FIXED