Description of problem: There is no sound over HDMI and no HDMI device shows up anywhere in the configuration places. How reproducible: Attach an HDMI cable, play a video/audio file --> Sound continues coming out from the speaker, but not over HDMI. I did a few commands, but i don't really understand their meanings: $ cat /proc/asound/modules 0 snd_hda_intel $ lspci | grep Audio 00:0e.0 Audio device: Intel Corporation Device 3198 (rev 03) $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC236 Analog [ALC236 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 $ aplay -L null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default Default ALSA Output (currently PulseAudio Sound Server) sysdefault:CARD=PCH HDA Intel PCH, ALC236 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog Front speakers surround21:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC236 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers pactl list cards Karte #0 Name: alsa_card.pci-0000_00_0e.0 Treiber: module-alsa-card.c Owner-Modul: 6 Eigenschaften: alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xa1310000 irq 125" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:0e.0" sysfs.path = "/devices/pci0000:00/0000:00:0e.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "3198" device.form_factor = "internal" device.string = "0" device.description = "Internes Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profile: input:analog-stereo: Analog Stereo-Eingabe (Ziele: 0, Quellen: 1, Priorität: 60, verfügbar: ja) output:analog-stereo: Analog Stereo-Ausgabe (Ziele: 1, Quellen: 0, Priorität: 6000, verfügbar: ja) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (Ziele: 1, Quellen: 1, Priorität: 6060, verfügbar: ja) off: Aus (Ziele: 0, Quellen: 0, Priorität: 0, verfügbar: ja) Aktives Profil: output:analog-stereo+input:analog-stereo Ports: analog-input-internal-mic: Internes Mikrofon (priority: 8900, latency offset: 0 usec) Eigenschaften: device.icon_name = "audio-input-microphone" Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-mic: Mikrofon (priority: 8700, latency offset: 0 usec, not available) Eigenschaften: device.icon_name = "audio-input-microphone" Teil der/des Profil(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-speaker: Lautsprecher (priority: 10000, latency offset: 0 usec) Eigenschaften: device.icon_name = "audio-speakers" Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Kopfhörer (priority: 9000, latency offset: 0 usec, not available) Eigenschaften: device.icon_name = "audio-headphones" Teil der/des Profil(s): output:analog-stereo, output:analog-stereo+input:analog-stereo $ pacmd list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_0e.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: front-left: 42558 / 65% / -11,25 dB, front-right: 42558 / 65% / -11,25 dB balance 0,00 base volume: 65536 / 100% / 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms card: 0 <alsa_card.pci-0000_00_0e.0> module: 6 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC236 Analog" alsa.id = "ALC236 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel PCH" alsa.long_card_name = "HDA Intel PCH at 0xa1310000 irq 125" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:0e.0" sysfs.path = "/devices/pci0000:00/0000:00:0e.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "3198" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "352800" device.buffering.fragment_size = "176400" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Internes Audio Analog Stereo" alsa.mixer_name = "Realtek ALC236" alsa.components = "HDA:10ec0236,103c84ce,00100002" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Lautsprecher (priority 10000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-speakers" analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: no) properties: device.icon_name = "audio-headphones" active port: <analog-output-speaker> $ grep -i codec /proc/asound/card*/codec* Codec: Realtek ALC236
Can someone please help debug this?
CC: (none) => kernel, marja11, pkg-bugs
I wonder if the PulseAudio audio profile setting is NOT correctly set for the output. I have seen this issue before, but as soon as I set PulseAudio to use HDMI in the output tab it worked. Not saying that it will work with this problem though.
CC: (none) => hamnisdude
(In reply to Kristoffer Grundström from comment #2) > I wonder if the PulseAudio audio profile setting is NOT correctly set for > the output. I have seen this issue before, but as soon as I set PulseAudio > to use HDMI in the output tab it worked. Not saying that it will work with > this problem though. There is no option for HDMI. HDMI does not show up at all in any of Puslaudio or ALSA options or Plasma multimedia settings. Please see also the results of the commands above in the original post.
I've tried it on Mageia 7b3 Live Media and it works great there. Would be very good to have it also in Mageia 6 ...
ok, it's resolved in Mageia 7.x
Resolution: (none) => FIXEDStatus: NEW => RESOLVED