Description of problem: This network connection problem is recurrent for several version of Mandriva already. When I do an installation from the DVD, at the end of the installation I set up the network (eth0 dhcp, freebox). I systematically connect failed during installation. However the network configuration is correct since, after rebooting, the network works well, without making changes. With the installation dvd, the defect was not critical. But with the dual arch CD, it becomes critical, it is not possible to add additional network sources. Note1: the problem does not depend on the network card. It is identical on five different computers, with at least four different cards. Note2: when I do a netinstall (cd with boot.iso), so I configure the network from the beginning of the installation. In this case there is no failure at the end of installation, by installing and configuring exactly the same way.
can you provide some logs ? you can found them in /root/drakx
Also provide the file /root/drakx/report.bug.gz as an attachment.
Created attachment 688 [details] Logfile
Created attachment 689 [details] Log file
Created attachment 690 [details] report.bug
Created attachment 691 [details] stage1
Created attachment 692 [details] Updates Despite the failure message of the connection, I try to do the updates. Surprisingly, the connection works.
Attachment 688 mime type: application/octet-stream => text/plain
Attachment 689 mime type: application/octet-stream => text/plain
Attachment 690 mime type: application/octet-stream => text/plain
Attachment 691 mime type: application/octet-stream => text/plain
Attachment 692 mime type: application/octet-stream => text/plain
Attachment 690 mime type: text/plain => application/octet-stream
So what works ? what doesn't ?
(In reply to comment #8) > So what works ? what doesn't ? 1- At the beginning of the network installation does not work, after configuration. It is therefore not possible to add an additional source. However, with dual-arch would be necessary, even essential. 2- Towards the end of the installation there is the resume stage, again with the network configuration. If I want to activate the network, I have an error message. 3- Just at the end of the installation is the stage of update. If I answer yes, the update is done properly, through the network.
Ok thanks, so that is in stage2. Assign to the maintainer. (I have found nothing useful in the log, Thierry, if I have missed something, feel free to tell me. :) )
Assignee: bugsquad => thierry.vignaudSource RPM: (none) => drakx-installer-stage2
pinging. because nothing happened to this report since more than 3 months ago, and it still has the status NEW or REOPENED @ Thierry Please set status to ASSIGNED if you think this bug was assigned correctly. If for work flow reasons you can't do that, then please put OK on the whiteboard instead.
CC: (none) => marja11
3-monthly ping
I tested Dual beta3 and the results are the following ones: The test of the network, after configuration, indicates a defect. But now, the connection is correctly made. Thus, now, only the test is defective.
Assignee: thierry.vignaud => mageiaSource RPM: drakx-installer-stage2 => drakx-net
The problem persists with Mageia2
Summary: Dual arch: network connect failed during installation. => Dual arch: network connect, the test failed during installation.
Version: 1 => CauldronWhiteboard: (none) => (MGA2)
Please look at the bottom of this mail to see whether you're the assignee of this bug, if you don't already know whether you are. If you're the assignee: We'd like to know for sure whether this bug was assigned correctly. Please change status to ASSIGNED if it is, or put OK on the whiteboard instead. If you don't have a clue and don't see a way to find out, then please put NEEDHELP on the whiteboard. Please assign back to Bug Squad or to the correct person to solve this bug if we were wrong to assign it to you, and explain why. Thanks :) **************************** @ the reporter and persons in the cc of this bug: If you have any new information that wasn't given before (like this bug being valid for another version of Mageia, too, or it being solved) please tell us. @ the reporter of this bug If you didn't reply yet to a request for more information, please do so within two weeks from now. Thanks all :-D
(In reply to comment #15) Problem persist for CD Dual-Arch Mageia 2
will close as a duplicate since there is more info in the other *** This bug has been marked as a duplicate of bug 5772 ***
Status: NEW => RESOLVEDResolution: (none) => DUPLICATESummary: Dual arch: network connect, the test failed during installation. => Classical install: network connect, the test failed during installation.
It seems that the defect is not solved. See http://www.mageialinux-online.org/forum/topic-13867+drakx11.php Personally I do not even any more try to realize this test at the end of installation.
Status: RESOLVED => REOPENEDResolution: DUPLICATE => (none)
Arrgh! I have just confused two things. In fact, in the stage 'Summary', there are two defective tests: - Test of the network configuration - > Failure of the test when I make the installation from a DVD. - Test of the graphic configuration
Two specified: - By making a netinstall, the result(profit) of the test is correct. - With the DVD, the test fails, but the network is correctly configured
Severity: major => normal
Is too old
Status: REOPENED => RESOLVEDResolution: (none) => OLD