Description of problem: I bough an ati/amd radeon rx550 (2g) graphics adapter. unknown : Advanced Micro Devices, Inc. [AMD/ATI]|Device 699f [DISPLAY_VGA] (rev: c7) 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 699f (rev c7) I am running with the vesa driver now, needless to say, not optimal Version-Release number of selected component (if applicable): mageia 5.1 ... How reproducible: Steps to Reproduce: 1. buy an rx550 ( pretty cheap ) 2. install, reboot 3. be surprised, it doesn't work :-) I am assuming there is a driver available somewhere, i can't seem to find it or install it. please help.
apparently there is a driver for the 550 amd-pro from the amd website, but it is not packaged for Mageia http://www.amd.com/en/products/graphics/radeon-rx-550 http://support.amd.com/en-us/download/linux
Assignee: bugsquad => kernelCC: (none) => marja11
Summary: AMD/ATI radeo rx550 not recognized, no drivers => AMD/ATI radeon rx550 not recognized, no drivers
Also experimented with amdgpu driver in Cauldron ... the card dies not work with that one either, to the extent, that when the amdgpu driver is picked, instead of the generic vesa driver, i couldn't finish a boot, not even in safe mode once amdgpu is available, detected and selected by the system, kernel would no longer boot. SO i am back to Mageia 5, and back to my old card with fglrx driver ... I do note, my old card worked better under Cauldron, and the new amdgpu driver that is selected for it.
Here is a transcript of the kernel fail with amdgpu driver from Cauldron installation ... i will try my best here:: Code: e8 62 2d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 .. .. .. dracut: Starting plymouth daemon clocksource: Switched to clocksource tsc And that is it, we go no further
The drivers in Ubuntu 17.4 extra software enabled ( of course ) work, amdgpu is the primary driver Linux kernel 4.10.0.19 ... didn't uprgrade, Hope that helps pointing you in the right direction
..
That card is a Polaris12 based card. kernel-4.9.34-3.mga6 and newer supports that hw, but it still need a matching mesa fix to get mesa support for it, and ldetect needs updating for the installer to know about it.. so in a day or 2 it should work
CC: (none) => tmb
sounds like great news :-) thanks.
just to confirm, the mageia6 release does not fix this issue.
Can you attach /vat/log/dmesg and output of lspcidrake -v when running Mageia 6
[ 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] Linux version 4.9.35-desktop-1.mga6 (iurt@rabbit.mageia.org) (gcc version 5.4.0 (GCC) ) #1 SMP Thu Jun 29 19:27:27 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.35-desktop-1.mga6 root=UUID=82422c7d-9025-42e5-81ca-df08b2a4a89c ro nokmsboot splash quiet noiswmd resume=UUID=ed24a812-eb7b-47ae-9e60-17f10f978c59 audit=0 vga=791 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfef2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/P5N-D, BIOS ASUS P5N-D ACPI BIOS Revision 1401 06/21/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfef0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5b20-0x000f5b2f] mapped at [ffff97d1c00f5b20] [ 0.000000] Base memory trampoline at [ffff97d1c0099000] 99000 size 24576 [ 0.000000] BRK [0x114f64000, 0x114f64fff] PGTABLE [ 0.000000] BRK [0x114f65000, 0x114f65fff] PGTABLE [ 0.000000] BRK [0x114f66000, 0x114f66fff] PGTABLE [ 0.000000] BRK [0x114f67000, 0x114f67fff] PGTABLE [ 0.000000] BRK [0x114f68000, 0x114f68fff] PGTABLE [ 0.000000] BRK [0x114f69000, 0x114f69fff] PGTABLE [ 0.000000] BRK [0x114f6a000, 0x114f6afff] PGTABLE [ 0.000000] BRK [0x114f6b000, 0x114f6bfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3659a000-0x372c4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7660 000024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 0x00000000BFEF30C0 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x00000000BFEF9AC0 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20160831/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20160831/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20160831/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20160831/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20160831/tbfadt-603) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20160831/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20160831/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20160831/tbfadt-708) [ 0.000000] ACPI: DSDT 0x00000000BFEF3240 00680A (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000BFEF0000 000040 [ 0.000000] ACPI: FACS 0x00000000BFEF0000 000040 [ 0.000000] ACPI: HPET 0x00000000BFEF9D00 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0x00000000BFEF9D80 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0x00000000BFEF9C00 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 0x00000000BFEF9E00 00087B (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13fffc000-0x13fffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfeeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1048206 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12220 pages used for memmap [ 0.000000] DMA32 zone: 782064 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfef2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfef3000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf1ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf2000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff97d2ffc00000 s106648 r8192 d32616 u524288 [ 0.000000] pcpu-alloc: s106648 r8192 d32616 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031805 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.35-desktop-1.mga6 root=UUID=82422c7d-9025-42e5-81ca-df08b2a4a89c ro nokmsboot splash quiet noiswmd resume=UUID=ed24a812-eb7b-47ae-9e60-17f10f978c59 audit=0 vga=791 [ 0.000000] audit: disabled (until reboot) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4031308K/4192824K available (7497K kernel code, 1221K rwdata, 3260K rodata, 1408K init, 796K bss, 161516K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2533.293 MHz processor [ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.58 BogoMIPS (lpj=2533293) [ 0.001016] pid_max: default: 32768 minimum: 301 [ 0.001024] ACPI: Core revision 20160831 [ 0.006405] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.006437] Security Framework initialized [ 0.006441] TOMOYO Linux initialized [ 0.006704] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009264] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010841] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010848] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011323] CPU: Physical Processor ID: 0 [ 0.011324] CPU: Processor Core ID: 0 [ 0.011326] mce: CPU supports 6 MCE banks [ 0.011336] CPU0: Thermal monitoring enabled (TM2) [ 0.011341] process: using mwait in idle threads [ 0.011346] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.011346] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.011705] Freeing SMP alternatives memory: 32K (ffffffff92e93000 - ffffffff92e9b000) [ 0.013005] ftrace: allocating 28622 entries in 112 pages [ 0.021139] smpboot: Max logical packages: 2 [ 0.022398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.033000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.033000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.033000] ... version: 2 [ 0.033000] ... bit width: 40 [ 0.033000] ... generic registers: 2 [ 0.033000] ... value mask: 000000ffffffffff [ 0.033000] ... max period: 000000007fffffff [ 0.033000] ... fixed-purpose events: 3 [ 0.033000] ... event mask: 0000000700000003 [ 0.033000] x86: Booting SMP configuration: [ 0.033000] .... node #0, CPUs: #1 [ 0.095022] x86: Booted up 1 node, 2 CPUs [ 0.095022] smpboot: Total of 2 processors activated (10132.76 BogoMIPS) [ 0.097013] devtmpfs: initialized [ 0.097077] x86/mm: Memory block size: 128MB [ 0.100581] PM: Registering ACPI NVS region [mem 0xbfef0000-0xbfef2fff] (12288 bytes) [ 0.100638] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.100645] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.100685] xor: measuring software checksum speed [ 0.109979] prefetch64-sse: 13460.000 MB/sec [ 0.119979] generic_sse: 11352.000 MB/sec [ 0.119980] xor: using function: prefetch64-sse (13460.000 MB/sec) [ 0.119982] pinctrl core: initialized pinctrl subsystem [ 0.120105] RTC time: 0:23:53, date: 07/21/17 [ 0.120205] NET: Registered protocol family 16 [ 0.123005] cpuidle: using governor ladder [ 0.126004] cpuidle: using governor menu [ 0.126068] ACPI: bus type PCI registered [ 0.126069] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.126141] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000) [ 0.126143] PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820 [ 0.126151] PCI: Using configuration type 1 for base access [ 0.126190] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.126190] mtrr: probably your BIOS does not setup all CPUs. [ 0.126190] mtrr: corrected configuration. [ 0.130055] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.146984] raid6: sse2x1 gen() 4191 MB/s [ 0.163979] raid6: sse2x1 xor() 4113 MB/s [ 0.180982] raid6: sse2x2 gen() 4421 MB/s [ 0.197982] raid6: sse2x2 xor() 5060 MB/s [ 0.214985] raid6: sse2x4 gen() 7144 MB/s [ 0.231979] raid6: sse2x4 xor() 5812 MB/s [ 0.231980] raid6: using algorithm sse2x4 gen() 7144 MB/s [ 0.231981] raid6: .... xor() 5812 MB/s, rmw enabled [ 0.231982] raid6: using ssse3x2 recovery algorithm [ 0.232054] ACPI: Added _OSI(Module Device) [ 0.232055] ACPI: Added _OSI(Processor Device) [ 0.232056] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.232057] ACPI: Added _OSI(Processor Aggregator Device) [ 0.236292] ACPI: Interpreter enabled [ 0.236311] ACPI: (supports S0 S1 S3 S4 S5) [ 0.236312] ACPI: Using IOAPIC for interrupt routing [ 0.236335] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.243321] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.243326] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.243330] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.243340] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge [ 0.243506] PCI host bridge to bus 0000:00 [ 0.243508] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.243510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.243511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.243513] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.243514] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window] [ 0.243516] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.243526] pci 0000:00:00.0: [10de:03a3] type 00 class 0x060000 [ 0.243660] pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000 [ 0.243788] pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000 [ 0.243920] pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000 [ 0.244064] pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000 [ 0.244206] pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000 [ 0.244325] pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000 [ 0.244455] pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000 [ 0.244581] pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000 [ 0.244696] pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000 [ 0.244813] pci 0000:00:01.2: [10de:03af] type 00 class 0x050000 [ 0.244932] pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000 [ 0.245052] pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000 [ 0.245170] pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000 [ 0.245287] pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000 [ 0.245416] pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000 [ 0.245535] pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000 [ 0.245672] pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000 [ 0.245848] pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400 [ 0.245889] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.245945] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.246010] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000 [ 0.246265] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100 [ 0.246400] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500 [ 0.246438] pci 0000:00:0a.1: reg 0x20: [io 0x1c00-0x1c3f] [ 0.246446] pci 0000:00:0a.1: reg 0x24: [io 0x1c80-0x1cbf] [ 0.246484] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.246584] pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000 [ 0.246714] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310 [ 0.246725] pci 0000:00:0b.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff] [ 0.246778] pci 0000:00:0b.0: supports D1 D2 [ 0.246779] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.246837] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.246881] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320 [ 0.246893] pci 0000:00:0b.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff] [ 0.246947] pci 0000:00:0b.1: supports D1 D2 [ 0.246948] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.247021] pci 0000:00:0b.1: System wakeup disabled by ACPI [ 0.247074] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a [ 0.247103] pci 0000:00:0d.0: reg 0x20: [io 0xfd00-0xfd0f] [ 0.247116] pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.247117] pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.247119] pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.247120] pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.247226] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185 [ 0.247238] pci 0000:00:0e.0: reg 0x10: [io 0x09f0-0x09f7] [ 0.247244] pci 0000:00:0e.0: reg 0x14: [io 0x0bf0-0x0bf3] [ 0.247250] pci 0000:00:0e.0: reg 0x18: [io 0x0970-0x0977] [ 0.247256] pci 0000:00:0e.0: reg 0x1c: [io 0x0b70-0x0b73] [ 0.247263] pci 0000:00:0e.0: reg 0x20: [io 0xf800-0xf80f] [ 0.247269] pci 0000:00:0e.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff] [ 0.247389] pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185 [ 0.247401] pci 0000:00:0f.0: reg 0x10: [io 0x09e0-0x09e7] [ 0.247407] pci 0000:00:0f.0: reg 0x14: [io 0x0be0-0x0be3] [ 0.247413] pci 0000:00:0f.0: reg 0x18: [io 0x0960-0x0967] [ 0.247419] pci 0000:00:0f.0: reg 0x1c: [io 0x0b60-0x0b63] [ 0.247426] pci 0000:00:0f.0: reg 0x20: [io 0xf300-0xf30f] [ 0.247432] pci 0000:00:0f.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff] [ 0.247552] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401 [ 0.247645] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.247690] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300 [ 0.247702] pci 0000:00:10.1: reg 0x10: [mem 0xfe028000-0xfe02bfff] [ 0.247764] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.247820] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.247926] pci 0000:01:00.0: [10de:05bf] type 01 class 0x060400 [ 0.247988] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.251014] pci 0000:00:03.0: PCI bridge to [bus 01-06] [ 0.251019] pci 0000:00:03.0: bridge window [io 0xb000-0xefff] [ 0.251022] pci 0000:00:03.0: bridge window [mem 0xfda00000-0xfddfffff] [ 0.251027] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref] [ 0.251085] pci 0000:02:00.0: [10de:05bf] type 01 class 0x060400 [ 0.251143] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.251200] pci 0000:02:01.0: [10de:05bf] type 01 class 0x060400 [ 0.251252] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.251307] pci 0000:02:02.0: [10de:05bf] type 01 class 0x060400 [ 0.251358] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.251416] pci 0000:02:03.0: [10de:05bf] type 01 class 0x060400 [ 0.251467] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.251538] pci 0000:01:00.0: PCI bridge to [bus 02-06] [ 0.251543] pci 0000:01:00.0: bridge window [io 0xb000-0xefff] [ 0.251546] pci 0000:01:00.0: bridge window [mem 0xfda00000-0xfddfffff] [ 0.251550] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref] [ 0.251598] pci 0000:03:00.0: [1002:699f] type 00 class 0x030000 [ 0.251623] pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.251640] pci 0000:03:00.0: reg 0x18: [mem 0xdfe00000-0xdfffffff 64bit pref] [ 0.251651] pci 0000:03:00.0: reg 0x20: [io 0xec00-0xecff] [ 0.251663] pci 0000:03:00.0: reg 0x24: [mem 0xfdd80000-0xfddbffff] [ 0.251674] pci 0000:03:00.0: reg 0x30: [mem 0xfddc0000-0xfdddffff pref] [ 0.251772] pci 0000:03:00.0: supports D1 D2 [ 0.251773] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.251866] pci 0000:03:00.1: [1002:aae0] type 00 class 0x040300 [ 0.251890] pci 0000:03:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit] [ 0.252014] pci 0000:03:00.1: supports D1 D2 [ 0.255017] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.255023] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 0.255027] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.255032] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.255085] pci 0000:02:01.0: PCI bridge to [bus 04] [ 0.255095] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff] [ 0.255098] pci 0000:02:01.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.255103] pci 0000:02:01.0: bridge window [mem 0xeff00000-0xefffffff 64bit pref] [ 0.255136] pci 0000:02:02.0: PCI bridge to [bus 05] [ 0.255141] pci 0000:02:02.0: bridge window [io 0xc000-0xcfff] [ 0.255144] pci 0000:02:02.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.255148] pci 0000:02:02.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref] [ 0.255183] pci 0000:02:03.0: PCI bridge to [bus 06] [ 0.255188] pci 0000:02:03.0: bridge window [io 0xb000-0xbfff] [ 0.255191] pci 0000:02:03.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.255195] pci 0000:02:03.0: bridge window [mem 0xefd00000-0xefdfffff 64bit pref] [ 0.255258] pci 0000:07:07.0: [10b7:9055] type 00 class 0x020000 [ 0.255272] pci 0000:07:07.0: reg 0x10: [io 0xac00-0xac7f] [ 0.255280] pci 0000:07:07.0: reg 0x14: [mem 0xfdfff000-0xfdfff07f] [ 0.255316] pci 0000:07:07.0: reg 0x30: [mem 0xfdfc0000-0xfdfdffff pref] [ 0.255343] pci 0000:07:07.0: supports D1 D2 [ 0.255344] pci 0000:07:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.255415] pci 0000:00:10.0: PCI bridge to [bus 07] (subtractive decode) [ 0.255417] pci 0000:00:10.0: bridge window [io 0xa000-0xafff] [ 0.255420] pci 0000:00:10.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.255423] pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.255424] pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.255426] pci 0000:00:10.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.255428] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.255429] pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.255431] pci 0000:00:10.0: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode) [ 0.256119] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256178] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) [ 0.256235] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256292] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256350] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) [ 0.256406] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15) [ 0.256462] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256519] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256577] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.256634] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256691] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256748] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256806] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.256862] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256919] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.256977] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.257039] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.257095] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.257153] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.257213] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.257298] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.257381] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.257463] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.257545] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.257627] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.257709] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.257790] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.257872] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.257955] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.258044] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.258128] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 0.258212] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.258295] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.258379] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.258463] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.258547] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.258630] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.258713] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.258797] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.258881] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 0.258965] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.259065] ACPI: Enabled 3 GPEs in block 20 to 5F [ 0.259184] vgaarb: setting as boot device: PCI:0000:03:00.0 [ 0.259184] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.259184] vgaarb: loaded [ 0.259184] vgaarb: bridge control possible 0000:03:00.0 [ 0.259194] SCSI subsystem initialized [ 0.259203] libata version 3.00 loaded. [ 0.259203] PCI: Using ACPI for IRQ routing [ 0.260310] PCI: pci_cache_line_size set to 64 bytes [ 0.260388] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.260389] e820: reserve RAM buffer [mem 0xbfef0000-0xbfffffff] [ 0.260514] NetLabel: Initializing [ 0.260515] NetLabel: domain hash size = 128 [ 0.260515] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.260533] NetLabel: unlabeled traffic allowed by default [ 0.260616] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.260621] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.260625] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.262021] clocksource: Switched to clocksource hpet [ 0.272363] VFS: Disk quotas dquot_6.6.0 [ 0.272399] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.272568] pnp: PnP ACPI init [ 0.272772] system 00:00: [io 0x1000-0x107f] has been reserved [ 0.272774] system 00:00: [io 0x1080-0x10ff] has been reserved [ 0.272776] system 00:00: [io 0x1400-0x147f] has been reserved [ 0.272778] system 00:00: [io 0x1480-0x14ff] has been reserved [ 0.272779] system 00:00: [io 0x1800-0x187f] has been reserved [ 0.272781] system 00:00: [io 0x1880-0x18ff] has been reserved [ 0.272786] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.272892] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.272894] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.272895] system 00:01: [io 0x0290-0x0297] has been reserved [ 0.272897] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.272900] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.272987] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.273340] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.273579] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.274375] system 00:05: [mem 0xf0000000-0xf1ffffff] has been reserved [ 0.274378] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.274495] system 00:06: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.274497] system 00:06: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.274499] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.274501] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.274503] system 00:06: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.274505] system 00:06: [mem 0xbfef0000-0xbfefffff] could not be reserved [ 0.274506] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved [ 0.274508] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.274510] system 00:06: [mem 0x00100000-0xbfeeffff] could not be reserved [ 0.274512] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.274514] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.274515] system 00:06: [mem 0xfeff0000-0xfeff03ff] could not be reserved [ 0.274518] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.274526] pnp: PnP ACPI: found 7 devices [ 0.281513] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.281562] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.281566] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] [ 0.281570] pci 0000:02:00.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.281573] pci 0000:02:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.281578] pci 0000:02:01.0: PCI bridge to [bus 04] [ 0.281580] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff] [ 0.281584] pci 0000:02:01.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.281587] pci 0000:02:01.0: bridge window [mem 0xeff00000-0xefffffff 64bit pref] [ 0.281592] pci 0000:02:02.0: PCI bridge to [bus 05] [ 0.281594] pci 0000:02:02.0: bridge window [io 0xc000-0xcfff] [ 0.281598] pci 0000:02:02.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.281601] pci 0000:02:02.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref] [ 0.281606] pci 0000:02:03.0: PCI bridge to [bus 06] [ 0.281608] pci 0000:02:03.0: bridge window [io 0xb000-0xbfff] [ 0.281612] pci 0000:02:03.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.281615] pci 0000:02:03.0: bridge window [mem 0xefd00000-0xefdfffff 64bit pref] [ 0.281619] pci 0000:01:00.0: PCI bridge to [bus 02-06] [ 0.281621] pci 0000:01:00.0: bridge window [io 0xb000-0xefff] [ 0.281625] pci 0000:01:00.0: bridge window [mem 0xfda00000-0xfddfffff] [ 0.281628] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref] [ 0.281633] pci 0000:00:03.0: PCI bridge to [bus 01-06] [ 0.281635] pci 0000:00:03.0: bridge window [io 0xb000-0xefff] [ 0.281638] pci 0000:00:03.0: bridge window [mem 0xfda00000-0xfddfffff] [ 0.281640] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref] [ 0.281644] pci 0000:00:10.0: PCI bridge to [bus 07] [ 0.281646] pci 0000:00:10.0: bridge window [io 0xa000-0xafff] [ 0.281650] pci 0000:00:10.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.281653] pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.281657] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.281659] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.281660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.281662] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.281663] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window] [ 0.281665] pci_bus 0000:01: resource 0 [io 0xb000-0xefff] [ 0.281666] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfddfffff] [ 0.281668] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xefffffff 64bit pref] [ 0.281669] pci_bus 0000:02: resource 0 [io 0xb000-0xefff] [ 0.281671] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfddfffff] [ 0.281672] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xefffffff 64bit pref] [ 0.281674] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.281675] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.281677] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.281678] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.281680] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.281681] pci_bus 0000:04: resource 2 [mem 0xeff00000-0xefffffff 64bit pref] [ 0.281682] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.281684] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.281685] pci_bus 0000:05: resource 2 [mem 0xefe00000-0xefefffff 64bit pref] [ 0.281687] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 0.281688] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.281689] pci_bus 0000:06: resource 2 [mem 0xefd00000-0xefdfffff 64bit pref] [ 0.281691] pci_bus 0000:07: resource 0 [io 0xa000-0xafff] [ 0.281692] pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.281694] pci_bus 0000:07: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.281695] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.281697] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window] [ 0.281698] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.281699] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.281701] pci_bus 0000:07: resource 8 [mem 0xbff00000-0xfebfffff window] [ 0.281791] NET: Registered protocol family 2 [ 0.281991] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.282152] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.282406] TCP: Hash tables configured (established 32768 bind 32768) [ 0.282466] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.282503] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.282581] NET: Registered protocol family 1 [ 0.282931] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.347338] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.347526] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.347533] PCI: CLS 32 bytes, default 64 [ 0.347602] Trying to unpack rootfs image as initramfs... [ 0.582258] Freeing initrd memory: 13484K (ffff97d1f659a000 - ffff97d1f72c5000) [ 0.582267] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.582270] software IO TLB [mem 0xbbef0000-0xbfef0000] (64MB) mapped at [ffff97d27bef0000-ffff97d27feeffff] [ 0.583394] workingset: timestamp_bits=56 max_order=20 bucket_order=0 [ 0.585405] zbud: loaded [ 0.586842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.586877] io scheduler noop registered [ 0.586878] io scheduler deadline registered [ 0.586887] io scheduler cfq registered [ 0.586924] io scheduler bfq registered (default) [ 0.586925] BFQ I/O-scheduler: v8r11 (with cgroups support) [ 0.587331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.587337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.587391] vesafb: mode is 1024x768x16, linelength=2048, pages=29 [ 0.587392] vesafb: scrolling: redraw [ 0.587393] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.587410] vesafb: framebuffer at 0xc0000000, mapped to 0xffffb55e00c00000, using 3072k, total 49152k [ 0.597814] Console: switching to colour frame buffer device 128x48 [ 0.608072] fb0: VESA VGA frame buffer device [ 0.608088] intel_idle: does not run on family 6 model 23 [ 0.608214] GHES: HEST is not enabled! [ 0.608286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.628923] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.629368] Linux agpgart interface v0.103 [ 0.632292] brd: module loaded [ 0.632525] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.632919] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.632924] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.633068] mousedev: PS/2 mouse device common for all mice [ 0.633121] rtc_cmos 00:02: RTC can wake from S4 [ 0.633268] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.633297] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.633325] ledtrig-cpu: registered to indicate activity on CPUs [ 0.633497] Key type dns_resolver registered [ 0.633498] mpls_gso: MPLS GSO support [ 0.633662] microcode: sig=0x10676, pf=0x1, revision=0x60f [ 0.633699] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.633845] registered taskstats version 1 [ 0.633860] zswap: loaded using pool lzo/zbud [ 0.634324] Btrfs loaded, crc32c=crc32c-generic [ 0.638138] Key type encrypted registered [ 0.638433] Magic number: 9:403:355 [ 0.638566] rtc_cmos 00:02: setting system clock to 2017-07-21 00:23:53 UTC (1500596633) [ 0.638612] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 0.638664] PM: Checking hibernation image partition UUID=ed24a812-eb7b-47ae-9e60-17f10f978c59 [ 0.747366] PM: Hibernation image not present or could not be loaded. [ 0.748910] Freeing unused kernel memory: 1408K (ffffffff92d33000 - ffffffff92e93000) [ 0.748911] Write protecting the kernel read-only data: 12288k [ 0.749348] Freeing unused kernel memory: 680K (ffff97d2d4756000 - ffff97d2d4800000) [ 0.751835] Freeing unused kernel memory: 836K (ffff97d2d4b2f000 - ffff97d2d4c00000) [ 0.809496] dracut: dracut-044 [ 0.825812] sata_nv 0000:00:0e.0: version 3.5 [ 0.826089] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 0.826114] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.826527] scsi host0: sata_nv [ 0.826632] scsi host1: sata_nv [ 0.826674] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 21 [ 0.826676] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 21 [ 0.826900] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 0.826915] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 0.827283] scsi host2: sata_nv [ 0.827381] scsi host3: sata_nv [ 0.827423] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 20 [ 0.827424] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 20 [ 1.133292] ata3: SATA link down (SStatus 0 SControl 300) [ 1.288031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.290487] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133 [ 1.290489] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.293055] ata1.00: configured for UDMA/133 [ 1.293274] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5 [ 1.306198] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.306200] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.306269] sd 0:0:0:0: [sda] Write Protect is off [ 1.306271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.306305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.380180] sda: sda1 sda2 < sda5 sda6 > [ 1.380673] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.613291] ata2: SATA link down (SStatus 0 SControl 300) [ 1.632022] tsc: Refined TSC clocksource calibration: 2533.309 MHz [ 1.632026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24842385862, max_idle_ns: 440795254678 ns [ 1.917299] ata4: SATA link down (SStatus 0 SControl 300) [ 1.920146] pata_amd 0000:00:0d.0: version 0.4.1 [ 1.920833] scsi host4: pata_amd [ 1.920944] scsi host5: pata_amd [ 1.920990] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14 [ 1.920991] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15 [ 2.255300] Uniform Multi-Platform E-IDE driver [ 2.374106] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.374164] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.374190] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.374204] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.386921] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.387065] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.388255] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.388333] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.388758] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.388858] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.453409] dracut: Starting plymouth daemon [ 2.605296] ACPI: bus type USB registered [ 2.605327] usbcore: registered new interface driver usbfs [ 2.605339] usbcore: registered new interface driver hub [ 2.606032] usbcore: registered new device driver usb [ 2.610740] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.618951] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.618952] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.619500] ehci-pci: EHCI PCI platform driver [ 2.619725] ehci-pci 0000:00:0b.1: EHCI Host Controller [ 2.619732] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 2.619742] ehci-pci 0000:00:0b.1: debug port 1 [ 2.619769] ehci-pci 0000:00:0b.1: cache line size of 32 is not supported [ 2.619783] ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 2.626027] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 2.626084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.626086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.626088] usb usb1: Product: EHCI Host Controller [ 2.626089] usb usb1: Manufacturer: Linux 4.9.35-desktop-1.mga6 ehci_hcd [ 2.626091] usb usb1: SerialNumber: 0000:00:0b.1 [ 2.626247] hub 1-0:1.0: USB hub found [ 2.626255] hub 1-0:1.0: 8 ports detected [ 2.627140] ohci-pci: OHCI PCI platform driver [ 2.627331] ohci-pci 0000:00:0b.0: OHCI PCI host controller [ 2.627337] ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 2.627366] ohci-pci 0000:00:0b.0: irq 23, io mem 0xfe02f000 [ 2.656220] clocksource: Switched to clocksource tsc [ 2.681077] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.681079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.681081] usb usb2: Product: OHCI PCI host controller [ 2.681083] usb usb2: Manufacturer: Linux 4.9.35-desktop-1.mga6 ohci_hcd [ 2.681084] usb usb2: SerialNumber: 0000:00:0b.0 [ 2.681247] hub 2-0:1.0: USB hub found [ 2.681256] hub 2-0:1.0: 8 ports detected [ 2.847474] random: fast init done [ 3.068159] PM: Starting manual resume from disk [ 3.068163] PM: Hibernation image partition 8:5 present [ 3.068164] PM: Looking for hibernation image. [ 3.068369] PM: Image not found (code -22) [ 3.068370] PM: Hibernation image not present or could not be loaded. [ 3.118073] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered [ 3.164020] usb 2-2: new low-speed USB device number 2 using ohci-pci [ 3.202723] dracut: Checking ext4: /dev/disk/by-uuid/82422c7d-9025-42e5-81ca-df08b2a4a89c [ 3.202906] dracut: issuing e2fsck -a /dev/disk/by-uuid/82422c7d-9025-42e5-81ca-df08b2a4a89c [ 3.277813] dracut: /dev/disk/by-uuid/82422c7d-9025-42e5-81ca-df08b2a4a89c: clean, 114226/3301376 files, 1268618/13183084 blocks [ 3.279890] dracut: Mounting /dev/disk/by-uuid/82422c7d-9025-42e5-81ca-df08b2a4a89c with -o rw,relatime,data=ordered,ro [ 3.355537] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered [ 3.359045] usb 2-2: New USB device found, idVendor=192f, idProduct=0916 [ 3.359048] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.359051] usb 2-2: Product: USB Optical Mouse [ 3.368199] hidraw: raw HID events driver (C) Jiri Kosina [ 3.377287] usbcore: registered new interface driver usbhid [ 3.377289] usbhid: USB HID core driver [ 3.378415] input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/0003:192F:0916.0001/input/input2 [ 3.378501] hid-generic 0003:192F:0916.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-2/input0 [ 3.436628] random: crng init done [ 3.472392] dracut: Mounted root filesystem /dev/sda1 [ 3.714702] dracut: Switching root [ 3.758735] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 3.832023] usb 2-3: new low-speed USB device number 3 using ohci-pci [ 4.035041] usb 2-3: New USB device found, idVendor=413c, idProduct=2107 [ 4.035045] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.035047] usb 2-3: Product: Dell USB Entry Keyboard [ 4.035049] usb 2-3: Manufacturer: Dell [ 4.046496] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/0003:413C:2107.0002/input/input3 [ 4.098080] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:0b.0-3/input0 [ 4.098416] systemd[1]: RTC configured in localtime, applying delta of -360 minutes to system time. [ 4.340331] NET: Registered protocol family 10 [ 4.409296] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.409451] systemd[1]: Detected architecture x86-64. [ 4.416066] systemd[1]: Set hostname to <localhost>. [ 5.433258] systemd[1]: Listening on Network Service Netlink Socket. [ 5.433449] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.433774] systemd[1]: Created slice System Slice. [ 5.472551] systemd[1]: Listening on udev Kernel Socket. [ 5.472719] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.483353] systemd[1]: Listening on Process Core Dump Socket. [ 5.483390] systemd[1]: Listening on udev Control Socket. [ 6.243090] EXT4-fs (sda1): re-mounted. Opts: acl [ 8.134440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 8.134445] ACPI: Power Button [PWRB] [ 8.134649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.134651] ACPI: Power Button [PWRF] [ 8.202920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.220151] IT8718 SuperIO detected. [ 8.220491] parport_pc 00:04: reported by Plug and Play ACPI [ 8.220540] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 8.231337] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.231339] ACPI: Thermal Zone [THRM] (40 C) [ 8.497720] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 8.497767] 3c59x: Donald Becker and others. [ 8.497774] 0000:07:07.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffb55e0067d000. [ 8.660080] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C05 (\_SB.PCI0.SM00) (20160831/utaddress-247) [ 8.660087] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.660089] ACPI Warning: SystemIO range 0x0000000000001C80-0x0000000000001CBF conflicts with OpRegion 0x0000000000001C80-0x0000000000001C85 (\_SB.PCI0.SM01) (20160831/utaddress-247) [ 8.660093] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.718393] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 8.745718] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 8.745823] nv_tco: Watchdog reboot detected [ 8.746033] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=1) [ 8.955530] ppdev: user-space parallel port driver [ 9.028730] intel_powerclamp: No package C-state available [ 9.065090] 3c59x 0000:07:07.0 enp7s7: renamed from eth0 [ 9.111829] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 9.111841] snd_hda_intel 0000:00:10.1: Disabling MSI [ 9.112131] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 9.112166] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 9.112167] snd_hda_intel 0000:03:00.1: Force to non-snoop mode [ 9.187608] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input7 [ 9.187682] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input8 [ 9.187748] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input9 [ 9.187817] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input10 [ 9.187883] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input11 [ 9.572746] systemd[1]: Found device WDC_WD5000LPVX-22V0TT0 5. [ 9.573337] systemd[1]: Activating swap /dev/disk/by-uuid/ed24a812-eb7b-47ae-9e60-17f10f978c59... [ 9.666425] Adding 4191344k swap on /dev/sda5. Priority:-1 extents:1 across:4191344k FS [ 9.669295] systemd[1]: Activated swap /dev/disk/by-uuid/ed24a812-eb7b-47ae-9e60-17f10f978c59. [ 9.669449] systemd[1]: Reached target Swap. [ 9.724038] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 9.724041] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.724043] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.724044] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.724045] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 9.724047] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.724049] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 9.724050] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.724052] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 9.740353] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 9.741027] systemd[1]: Mounting Temporary Directory... [ 9.744636] systemd[1]: Mounted Temporary Directory. [ 10.236690] systemd[1]: Found device WDC_WD5000LPVX-22V0TT0 6. [ 10.237309] systemd[1]: Starting File System Check on /dev/disk/by-uuid/8d1dee0a-3928-464a-9db2-a5c419580ac1... [ 10.402551] systemd[1]: Started File System Check on /dev/disk/by-uuid/8d1dee0a-3928-464a-9db2-a5c419580ac1. [ 10.584401] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl [ 10.753553] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/sound/card0/input12 [ 10.753812] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input13 [ 10.753878] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input14 [ 10.753941] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input15 [ 10.754014] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input16 [ 10.754080] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input17 [ 10.754143] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input18 [ 10.754214] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input19 [ 10.754279] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input20 [ 10.892930] systemd-journald[525]: Received request to flush runtime journal from PID 1 [ 10.893978] device-mapper: uevent: version 1.0.3 [ 10.896154] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
shpchp : NVIDIA Corporation|Device 05bf [BRIDGE_PCI] (vendor:10de device:05bf) (rev: a2) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03bc) (rev: a1) 3c59x : 3Com Corporation|3c905B 100BaseTX [Cyclone] [NETWORK_ETHERNET] (vendor:10b7 device:9055) (rev: 30) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03ab) (rev: a1) shpchp : NVIDIA Corporation|Device 05bf [BRIDGE_PCI] (vendor:10de device:05bf) (rev: a2) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b5) (rev: a1) shpchp : NVIDIA Corporation|Device 05bf [BRIDGE_PCI] (vendor:10de device:05bf) (rev: a2) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03ad) (rev: a1) unknown : NVIDIA Corporation|MCP51 PCI Bridge [BRIDGE_PCI] (vendor:10de device:026f) (rev: a2) ehci_pci : NVIDIA Corporation|MCP51 USB Controller [SERIAL_USB] (vendor:10de device:026e subv:1043 subd:81bc) (rev: a3) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03af) (rev: a1) pata_amd : NVIDIA Corporation|MCP51 IDE [STORAGE_IDE] (vendor:10de device:0265 subv:1043 subd:81bc) (rev: a1) Card:ATI Volcanic Islands and later (amdgpu/fglrx): Advanced Micro Devices, Inc. [AMD/ATI]|Lexa PRO [Radeon RX 550] [DISPLAY_VGA] (vendor:1002 device:699f subv:1043 subd:0511) (rev: c7) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b1) (rev: a1) unknown : NVIDIA Corporation|MCP51 LPC Bridge [BRIDGE_ISA] (vendor:10de device:0260 subv:1043 subd:81bc) (rev: a3) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03ac) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b3) (rev: a1) unknown : NVIDIA Corporation|MCP51 Memory Controller 0 [MEMORY_RAM] (vendor:10de device:0272 subv:1043 subd:81bc) (rev: a3) shpchp : NVIDIA Corporation|Device 05bf [BRIDGE_PCI] (vendor:10de device:05bf) (rev: a2) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b6) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03a9) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03ba) (rev: a1) sata_nv : NVIDIA Corporation|MCP51 Serial ATA Controller [STORAGE_IDE] (vendor:10de device:0266 subv:1043 subd:81bc) (rev: a1) unknown : NVIDIA Corporation|MCP51 Host Bridge [MEMORY_RAM] (vendor:10de device:0270 subv:1043 subd:81bc) (rev: a2) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03a8) (rev: a2) ohci_pci : NVIDIA Corporation|MCP51 USB Controller [SERIAL_USB] (vendor:10de device:026d subv:1043 subd:81bc) (rev: a3) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b4) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03ae) (rev: a1) snd_hda_intel : NVIDIA Corporation|MCP51 High Definition Audio [MULTIMEDIA_AUDIO_DEV] (vendor:10de device:026c subv:1043 subd:829e) (rev: a2) shpchp : NVIDIA Corporation|Device 05bf [BRIDGE_PCI] (vendor:10de device:05bf) (rev: a2) shpchp : NVIDIA Corporation|C55 PCI Express bridge [BRIDGE_PCI] (vendor:10de device:03b7) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b0) (rev: a1) snd_hda_intel : Advanced Micro Devices, Inc. [AMD/ATI]|Device aae0 [MULTIMEDIA_AUDIO_DEV] (vendor:1002 device:aae0 subv:1043 subd:aae0) unknown : NVIDIA Corporation|C55 Host Bridge [BRIDGE_HOST] (vendor:10de device:03a3) (rev: a2) sata_nv : NVIDIA Corporation|MCP51 Serial ATA Controller [STORAGE_IDE] (vendor:10de device:0267 subv:1043 subd:81bc) (rev: a1) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03b2) (rev: a1) i2c_nforce2 : NVIDIA Corporation|MCP51 SMBus [SERIAL_SMBUS] (vendor:10de device:0264 subv:1043 subd:81bc) (rev: a3) unknown : NVIDIA Corporation|C55 Memory Controller [MEMORY_RAM] (vendor:10de device:03aa) (rev: a1) hub : Linux 4.9.35-desktop-1.mga6 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002) hub : Linux 4.9.35-desktop-1.mga6 ohci_hcd|OHCI PCI host controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) usbhid : Avago Technologies, Pte.|USB Optical Mouse [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:192f device:0916) usbhid : Dell|Dell USB Entry Keyboard [Human Interface Device|Boot Interface Subclass|Keyboard] (vendor:413c device:2107) hid_generic : Dell Dell USB Entry Keyboard hid_generic : USB Optical Mouse
Does the same thing happen if you use the boot.iso image to install Mageia?
CC: (none) => hamnisdude
I am afraid i did not understand the question. I downloaded the 64 bit classical install image and burned it onto a usb stick, the installation went well, it failed upon first boot, i managed with help to persuade mageia to not use the amdgpu driver and replaced it with the vesa driver instead. now i can boot mageia, and do updates and installations. but it's the vesa driver, and not the detected amdgpu
Ignore connent 12, it would not help here. Is radeon-firmware and x11-driver-video-amdgpu installed ? as dmesg did not show any amdgpu stuff, sp can you do (as root): journalctl -b > /tmp/bug21020.txt and attach the file /tmp/bug21020.txt to this report
Where did the boot param "nokmsboot" come from, can you try booting with that removed? amdgpu requires kms
CC: (none) => JMiahMan
Also please remove vga= as that screws with KMS as well.
A lot of good info on this module here: https://wiki.archlinux.org/index.php/AMDGPU May help..
(In reply to JMiahMan from comment #15) > Where did the boot param "nokmsboot" come from, can you try booting with > that removed? amdgpu requires kms Ah, good catch... I missed that one... Maybe it's from an upgraded mga5 that had fglrx that needed it... Anyway, remove that to allow amdgpu to initialize
I will try to answers in order of appearence : Package x11-driver-video-amdgpu-1.3.0-1.mga6.x86_64 is already installed Package radeon-firmware-20170531-1.mga6.nonfree.noarch is already installed journalctl -b > done will attach. I will also remove "nokmsboot" and vga= ... from grub
Created attachment 9508 [details] requested boot dump
i removed nokmsboot and vga=... from /etc/default/grub ran the update-grub reinstated the amdgpu driver in /usr/share/ldetect-lst/Cards+ and ran update-ldetect-lst my kernel chashed upon boot when it loaded the amdgpu driver.. I can take a picture
(In reply to Kristoffer Grundström from comment #12) > Does the same thing happen if you use the boot.iso image to install Mageia? Did You mean a Network Installation image ( available on http://www.mageia.org/en/downloads/ )? Seems that the contents of [protocol]://[Mageia mirror]/distrib/[release]/[architecture]/install/images/ have changed and at present there's no "boot.iso" in it.
CC: (none) => werni
(In reply to Thomas Backlund from comment #14) Just noticed > Ignore connent 12, it would not help here. So please deal the same way with my Comment 22.
Version: 5 => 6
(In reply to Michał Wernicki from comment #23) > (In reply to Thomas Backlund from comment #14) > Just noticed > > Ignore connent 12, it would not help here. > > So please deal the same way with my Comment 22. Mageia-6-x86_64-DVD.iso is the one i downloaded.
So i started in safe mode Went into console modprobed amdgpu results: amdgpu 0000:03:00.0 Fatal error during GPU init drm amdgpu: finishing device BUG: unable to handle kernel NULL pointer dereference at (null) ....
(In reply to Sam Khangyi from comment #25) > So i started in safe mode > > Went into console > > modprobed amdgpu > > > results: > > amdgpu 0000:03:00.0 Fatal error during GPU init > > drm amdgpu: finishing device > BUG: unable to handle kernel NULL pointer dereference at (null) > > .... ok, so there is a bug in amdgpu driver :/ can you capture the whole kernel crash ? check logs if it got logged, or use a camera and take a picture of the screen and attach it here
Created attachment 9520 [details] crash picture ...
Ok, uploading a few log files bug21020-modprobe-results.txt <-- i have started the system running vesa only, then done a modprobe amdgpu .. it returned killed and this is the logfile detailing what went down.. bug21020-failed-reboots.txt <-- contains a series of reboots with some previous kernels and the latest .40 kernel .. all failed by the way
Created attachment 9553 [details] bug21020-modprobe-results.txt
Created attachment 9554 [details] bug21020-failed-reboots.txt
I gave a try to Mageia on a RX 550 machine (that works well with some other distros with 4.11+ kernels). At first I booted Mageia-6-LiveDVD-Plasma-x86_64-DVD.iso . Whether I chose free or non-free GPU driver, the boot process hung after several seconds at black screen with or without non-blinking cursor. The noiticeable difference between using free and non-free driver for the GPU was a short period of "boiling cauldron" displayed on the screen, but after that the system looked the same. I also tried using non-free driver with 'nokmsboot' removed from GRUB command and in effect even the "boiling cauldron" didn't show up and system hung sooner than otherwise. Only using "Safe Settings" led to the following line on the screen: [ 3.686...] mce: Unable to init device /dev/mcelog (rc: -5) After that I installed the system on HDD using Mageia-6-netinstall-x86_64.iso image. Installation went smoothly, with graphical configurator and nothing unusual, but on the first (and any subsequent) boot I couldn't get any useful display either. I'm aware that what I experienced could be linked to any piece of hardware - not necessarily RX 550.
(In reply to Sam Khangyi from comment #2) > Also experimented with amdgpu driver in Cauldron ... the card dies not work > with that one either(...) Not true anymore. I recently tried both Mageia 6 and Cauldron with kernel-desktop-4.12.10-1.mga7 (from Cauldron repository) and hereby I happily announce: the card (DID: 1002:699F) works (under both). And a short note for those wanting to try: you may add "modprobe.blacklist=amdgpu 3" to the bootloader's kernel line until you get kernel > 4.9 installed (without "3" SDDM would keep trumpimg the UI - couldn't it make sure first that the display is capable of displaying it?).
Keywords: (none) => NOT_IN_CAULDRON
(In reply to Michał Wernicki from comment #32) > (In reply to Sam Khangyi from comment #2) > > Also experimented with amdgpu driver in Cauldron ... the card dies not work > > with that one either(...) > > Not true anymore. > I recently tried both Mageia 6 and Cauldron with > kernel-desktop-4.12.10-1.mga7 (from Cauldron repository) and hereby I > happily announce: > the card (DID: 1002:699F) works (under both). > > > And a short note for those wanting to try: > you may add > "modprobe.blacklist=amdgpu 3" > to the bootloader's kernel line until you get kernel > 4.9 installed > (without "3" SDDM would keep trumpimg the UI - couldn't it make sure first > that the display is capable of displaying it?). could you post instructions on migrating up from 5.1 , through 6 and them to Cauldron .. or the instructions to go directly to Cauldron (7) from 5.1 ..
(In reply to Sam Khangyi from comment #33) > could you post instructions on migrating up from 5.1 , through 6 and them to > Cauldron .. or the instructions to go directly to Cauldron (7) from 5.1 .. You dont want to go to cauldron at this point unless you want to deal with breakages... I will however provide a 4.12.12+ kernel in mga6 backports for those that need it, and in a couple of months Mageia 6 will switch to 4.14 longterm kernel
(In reply to Thomas Backlund from comment #34) > (In reply to Sam Khangyi from comment #33) > > > > could you post instructions on migrating up from 5.1 , through 6 and them to > > Cauldron .. or the instructions to go directly to Cauldron (7) from 5.1 .. > > You dont want to go to cauldron at this point unless you want to deal with > breakages... > > I will however provide a 4.12.12+ kernel in mga6 backports for those that > need it, and in a couple of months Mageia 6 will switch to 4.14 longterm > kernel Ok, Thanks, so basically i can upgrade to 6, add the boot parameter to grub settings, insert the new card, enable backports, and wait for 4.12.12+ kernel update to show up, then remove the "modprobe.blacklist=amdgpu 3" from the grub settings and I should be golden ..
Sorry it took so long :/ There is now a 4.12.14-1.mga6 currently in Core Backports Testing if you want to try it out. I will assign it to QA in a few days as soon as I have tested it on a few systems myself...
it worked, updated my Guyana pig system, installed the linux-desktop 4.12.14.1 kernel, rebooted, removed boring graphics card, installed the 550, booted, it recognized the card, than rebooted, and i am back on kde, glxgears does 60 fps in all sizes, unigine heaven is running like a charm :-) Runs awesome. 34 fps, no stuttering Thanks.
This message is a reminder that Mageia 6 is end of life. Mageia stopped maintaining and issuing updates for Mageia 6. At that time this bug will be closed as OLD (EOL). Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Mageia version prior to Mageia 6's end of life. Bug Reporter: Thank you for reporting this issue and we are sorry that we cannot be able to fix it before Mageia 6 was end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Mageia, you are encouraged to click on "Version" and change it against that version of Mageia. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Mageia release includes newer upstream software that fixes bugs or makes them obsolete. -- Mageia Bugsquad
Status: NEW => RESOLVEDCC: (none) => ouaurelienResolution: (none) => OLD