Created attachment 6553 [details]
report.bug.xz

Created attachment 6554 [details]
During upgrade: "'script' failed for umlgraph-5.4-3.mga4"

Created attachment 6555 [details]
At the end of install: 2 transactions failed

The Eaton UPS issue is solved: I updated the 'Intelligent Power Protector' RPM from http://pqsoftware.eaton.com/explore/fra/ipp/default_fr.htm?lang=fr&os=LINUX to version 1.42

rpm -Uvh /home/leroy_o/local/RPM/ipp-linux-1.42.109-1.x86_64.rpm

Source RPM: (none) => ipp-linux-1.42.109-1.x86_64.rpm

(In reply to Olivier LE ROY from comment #4)
> The Eaton UPS issue is solved: I updated the 'Intelligent Power Protector'
> RPM from
> http://pqsoftware.eaton.com/explore/fra/ipp/default_fr.htm?lang=fr&os=LINUX
> to version 1.42
> 
> rpm -Uvh /home/leroy_o/local/RPM/ipp-linux-1.42.109-1.x86_64.rpm

is that something we can fix in Mageia?

Hi,

The sound issue is fixed also.

I rebooted a second time, and sound is coming again. The issue is not really explained, though.

For the Eaton UPS, my "Evolution" is in the list of unrecognized hardware in Mageia control center, even though the Intelligent Power Protector: Eaton-IPP is started.

Maybe Eaton UPSes could be added in the UPS list, so that they show off recognized as UPS.

But when I downloaded ipp-linux-1.42.109-1.x86_64.rpm on Eaton support website, I had to accept a licence agreement, therefore I don't know if the package could be added in Mageia distribution.

Additional information for UPS from "Detected hardware" in Mageia control center:
Name: Evolution
Identification
Fabricant: âEATON

Description: âEvolution

Classe de média: âHuman Interface Device|No Subclass|None

Connexion
Bus: âUSB

Bus PCI n°: â6

Périphérique PCI n°: â2

Identifiant du fabricant: â0x0463

Divers
Module: âUPS:newhidups

I don't know about Eaton UPSs, have you tried the nut package to see if it is supported?

I'm changing the bug subject since the sound and UPS issues have been resolved anyway.  We do still have the other upgrade errors to deal with.

I'm not sure if anything can be done about the umlgraph Mageia 4 package %postun calling $update_maven_depmap.

As for Comment 3, Nicolas, that needs to be fixed in the Qt5 packages shown in the screenshot.  That's why I CC'd you.

CC: (none) => mageia
Summary: Upgrade to Mageia 5 RC: no sound and Eaton UPS 'Intelligent Power Protector' fails to run => Upgrade to Mageia 5 RC: Qt5 upgrade problem and umlgraph scriplet issue

It looks like qtquickcontrols5 needs to Conflict with the older version of qtdeclarative5.

(In reply to David Walser from comment #9)
> It looks like qtquickcontrols5 needs to Conflict with the older version of
> qtdeclarative5.

Raising to release_blocker for this issue only.

Priority: Normal => release_blocker

For the Eaton UPS, I have tried nuts package, but couldn't have communication working either through serial link (RS232) or USB.

Therefore I abandonned nuts when ipp appeared in the support pages of Eaton website. And ipp does the job very well (graphs of input voltage, intantaneous power, remaining time, and automatic shutdown when below certain level...).

But the issue is now about qtquickcontrols5

Yeah, In mga4 there are many java packages that call the script $update_maven_depmap in %post and %postun section.
And now on mga5 normally there should no more be any. We have dropped all of these old and no more needed scripts.
I don't know too if anything can be done for that.

CC: (none) => geiger.david68210

umlgraph now fixed on svn.

qtquickcontrols5 should be ok now, just waiting to be uploaded

just submitted. Please test

CC: (none) => ennael1

Here is the log of install of new RPM:

install qtquickcontrols5-5.4.0-2.mga5.x86_64: success

mai 16 09:06:19 localhost.localdomain [RPM][25989]: erase qtquickcontrols5-5.4.0-1.mga5.x86_64: success

As it can be seen there is no error.

OK, let's mark this as FIXED then.  The umlgraph issue affects many other packges and is being looked at in Bug 15942.

Thanks for the report.

Status: NEW => RESOLVED
Resolution: (none) => FIXED