Bug 14854 - Mageia5 beta1 DVD fails to boot on laptop
Summary: Mageia5 beta1 DVD fails to boot on laptop
Status: RESOLVED FIXED
Alias: None
Product: Mageia
Classification: Unclassified
Component: Release (media or process) (show other bugs)
Version: Cauldron
Hardware: x86_64 Linux
Priority: Normal critical
Target Milestone: ---
Assignee: Mageia Bug Squad
QA Contact:
URL:
Whiteboard:
Keywords:
Depends on:
Blocks:
 
Reported: 2014-12-19 13:27 CET by Gerald
Modified: 2014-12-24 18:51 CET (History)
4 users (show)

See Also:
Source RPM: Mageia-5-beta1-x86_64-DVD.iso, isolinux
CVE:
Status comment:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Description Gerald 2014-12-19 13:27:59 CET 
Description of problem:

I cannot boot the Mageia5 beta 1 DVD on my Dell Vostro laptop. 
Message: "Failed to load ldlinux.c32" 
When a press a key to continue, my laptop reboots.

The DVD boots fine on my desktop PC.
I checked md5sum and sha1sum and they are O.K.





Reproducible: 

Steps to Reproduce:
Comment 1 Dick Gevers 2014-12-19 13:46:01 CET 
Excuse me for a stupid question, but is the BIOS of the laptop configured to boot from that drive?
Thierry Vignaud 2014-12-21 11:58:00 CET

CC: (none) => ennael1, erwanaliasr1, sysadmin-bugs, thierry.vignaud
Component: Installer => Release (media or process)
Source RPM: Mageia-5-beta1-x86_64-DVD.iso => Mageia-5-beta1-x86_64-DVD.iso, isolinux

Comment 2 Erwan VELU 2014-12-21 12:56:05 CET 
Can you check if you don't have any bios update on your dell host ?
Can you please report if its efi based or not.

Thanks.
Comment 3 Gerald 2014-12-22 06:53:11 CET 
(In reply to Dick Gevers from comment #1)

> Excuse me for a stupid question, but is the BIOS of the laptop configured to
> boot from that drive?

There is not much to configure in the BIOS about booting. Booting from the optical drive (DVD/CD drive) is "enabled" and I can change the boot priority order. The optical drive is the first device in the boot priority order. What else in the BIOS could be of importance?  

For testing purpose I changed the "SATA Operation" from AHCI to ATA. Now the Mageia5 DVD boots and the install menu appears. Next I can run "Memory test" without problems (OK). When I choose to run the "Hardware Detection Tool" the screens turns black, only showing a blinking cursor, the system freezes and a power off/on reboot is needed to continue. After a reboot I can continue to install Mageia on my hard drive, but installing the packages is much slower than usual.

But changing the SATA setting is not a permanent solution. I suppose that it affects all other OS on this laptop (multiboot with Windows7 and Mageia3).
Comment 4 Gerald 2014-12-22 07:12:40 CET 
(In reply to Erwan VELU from comment #2)

> Can you check if you don't have any bios update on your dell host ?
> Can you please report if its efi based or not.
> 
> Thanks.

The BIOS (Dell/Phoenix SecureCore Tiano Setup) is not efi based.

This week I will check if there are updates available.
Comment 5 Erwan VELU 2014-12-24 10:37:24 CET 
I'm very surprised that switching to AHCI solves the syslinux issue as it have very few in common.

Can you confirm switching AHCI back (which should be prefered for performance issues) trigger the same "cannot load ldlinux" error ?
Comment 6 Gerald 2014-12-24 18:51:55 CET 
(In reply to Gerald from comment #4)
> (In reply to Erwan VELU from comment #2)
> 
> > Can you check if you don't have any bios update on your dell host ?
> > Can you please report if its efi based or not.
> > 
> > Thanks.
> 
> The BIOS (Dell/Phoenix SecureCore Tiano Setup) is not efi based.
> 
> This week I will check if there are updates available

I updated the BIOS to the latest version. That fixed the boot problem. I can boot from this DVD now.

But the problem with the Hardware Detection Tool remains (bug 13829).

Status: NEW => RESOLVED
Resolution: (none) => FIXED
Note You need to log in before you can comment on or make changes to this bug.