Description of problem: with kernel-desktop-3.12.0-3.mga4 darakx11 fails to setup proprietary nvidia driver. Version-Release number of selected component (if applicable): kernel-desktop-3.12.0-3.mga4 How reproducible: removing nvidia packagis and using nouveau - reboot - drakx11 - using proprietary driver - reboot - error message -> fallback to nouveau Booting with kernel-desktop-3.12.0-2.mga4 -> drakx11 - using proprietary driver - reboot - works Reproducible: Steps to Reproduce:
I concur.
CC: (none) => jdchoate
Same, this has happened several times in the last few kernel upgrades.
CC: (none) => nicblaisSee Also: (none) => https://bugs.mageia.org/show_bug.cgi?id=11496
Still doing it with 3.12.1-desktop-1...
CC: (none) => hhielscher
CC: (none) => anssi.hannula, thierry.vignaud, tmb
With new update as of today, loads the module, then unloads it for some reason and loads nouveau: [ 1.935404] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8 [ 1.935459] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 1.935491] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 [ 1.935517] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5 [ 1.985664] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 1.992386] systemd-udevd[519]: renamed network interface wlan0 to wlp5s0 [ 2.069932] nvidia: module license 'NVIDIA' taints kernel. [ 2.069934] Disabling lock debugging due to kernel taint [ 2.074590] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 2.074685] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 2.074688] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013 //snip [ 3.601426] [drm] Module unloaded [ 3.666637] MXM: GUID detected in BIOS [ 3.666854] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4090a2 [ 3.666855] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4) [ 3.666856] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 3.668067] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.668072] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.668073] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.769179] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.769180] nouveau [ VBIOS][0000:01:00.0] using image from PROM [ 3.769242] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.769243] nouveau [ VBIOS][0000:01:00.0] version 80.04.4b.00.15 [ 3.769410] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5 [ 3.769412] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 3.769413] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 3.793135] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.793137] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 3.793139] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.825562] [TTM] Zone kernel: Available graphics memory: 8189888 kiB
I also agree and it's pretty annoying
CC: (none) => nicolas.p919
Priority: Normal => release_blockerBlocks: (none) => 11704
For me, nvidia doesn't work on either 3.12.0 (iso) or 3.12.1. When booting 3.12.0 with nvidia, I get an error regarding fs/xfs/xfs_sb.c line 628 and that's where the system hangs. With 3.12.1, the nvidia module loads, then X never starts though kdm does. Nouveau only works for me with 3.12.0. Even after specifying nouveau in XFDrake, booting 3.12.1 results in trying to boot with nvidia instead, which of course fails. So, currently stuck with 3.12.0 kernel from the .iso and nouveau. It's obvious we're all waiting for an nvidia fix, but I was wondering if anyone else has troubles with nouveau and latest kernel too.
Nouveau works for me with Kernel 3.12.1-desktop-1.mga4 (I get a message at start that X uses nouveau as the NVidia kernel module couldn't be found or something similar :-) )
Still broken with latest update.
The fix is simple. From now on, drakconf should update the /etc/default/grub file And the fix to this is simple. Simply add the following line to that file. GRUB_CMDLINE_LINUX_DEFAULT=" quiet splash rdblacklist=nouveau " GRUB_TERMINAL=console To fix manually, just add those lines and then run: grub2-mkconfig -o /boot/grub2/grub.cfg
CC: (none) => tauiris
Didn't work for me unfortunately. Still get this: [ 1.921354] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8 [ 1.921539] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 1.921569] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 [ 1.921593] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5 [ 1.927198] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc [ 1.927200] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.990894] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 1.999229] systemd-udevd[518]: renamed network interface wlan0 to wlp5s0 [ 2.049013] nvidia: module license 'NVIDIA' taints kernel. [ 2.049016] Disabling lock debugging due to kernel taint [ 2.053819] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 2.053918] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 2.053922] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013 [ 2.963156] device-mapper: uevent: version 1.0.3 [ 2.963297] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 3.330898] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 3.339524] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.351162] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 3.363180] QNX4 filesystem 0.2.3 registered. [ 3.491060] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 3.491141] ufs_read_super: bad magic number [ 3.499018] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 3.499099] ufs_read_super: bad magic number [ 3.518711] EXT2-fs (sda4): error: unable to read superblock [ 3.519485] EXT4-fs (sda4): unable to read superblock [ 3.520300] cramfs: wrong magic [ 3.523661] EXT3-fs (sda4): error: unable to read superblock [ 3.524750] XFS (sda4): bad magic number [ 3.524753] ffff8803eed3e000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.524782] ffff8803eed3e010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.524822] ffff8803eed3e020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.524862] ffff8803eed3e030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.524903] XFS (sda4): Internal error xfs_sb_read_verify at line 637 of file fs/xfs/xfs_sb.c. Caller 0xffffffffa1053525 [ 3.524961] CPU: 0 PID: 281 Comm: kworker/0:1H Tainted: P O 3.12.2-desktop-1.mga4 #1 [ 3.524962] Hardware name: MSI MS-7851/Z87I (MS-7851), BIOS V1.4 09/30/2013 [ 3.524974] Workqueue: xfslogd xfs_buf_iodone_work [xfs] [ 3.524976] 0000000000000001 ffff88040a0c9d68 ffffffff8160f593 ffff88040badc800 [ 3.524977] ffff88040a0c9d80 ffffffffa105664b ffffffffa1053525 ffff88040a0c9db8 [ 3.524978] ffffffffa10566a5 0000027d00000000 ffff88040a400300 0000000000000016 [ 3.524980] Call Trace: [ 3.524984] [<ffffffff8160f593>] dump_stack+0x45/0x56 [ 3.524990] [<ffffffffa105664b>] xfs_error_report+0x3b/0x40 [xfs] [ 3.524996] [<ffffffffa1053525>] ? xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.525002] [<ffffffffa10566a5>] xfs_corruption_error+0x55/0x80 [xfs] [ 3.525013] [<ffffffffa10aa530>] xfs_sb_read_verify+0x130/0x150 [xfs] [ 3.525019] [<ffffffffa1053525>] ? xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.525024] [<ffffffffa1053525>] xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.525027] [<ffffffff8107b2bc>] process_one_work+0x17c/0x410 [ 3.525028] [<ffffffff8107bea1>] worker_thread+0x121/0x3b0 [ 3.525030] [<ffffffff8107bd80>] ? rescuer_thread+0x320/0x320 [ 3.525031] [<ffffffff81082820>] kthread+0xc0/0xd0 [ 3.525033] [<ffffffff81082760>] ? kthread_create_on_node+0x120/0x120 [ 3.525035] [<ffffffff8161e74c>] ret_from_fork+0x7c/0xb0 [ 3.525036] [<ffffffff81082760>] ? kthread_create_on_node+0x120/0x120 [ 3.525037] XFS (sda4): Corruption detected. Unmount and run xfs_repair [ 3.525066] XFS (sda4): SB validate failed with error 22. [ 3.527021] FAT-fs (sda4): bogus number of reserved sectors [ 3.527022] FAT-fs (sda4): Can't find a valid FAT filesystem [ 3.527917] FAT-fs (sda4): bogus number of reserved sectors [ 3.527918] FAT-fs (sda4): Can't find a valid FAT filesystem [ 3.530521] MINIX-fs: unable to read superblock [ 3.532469] attempt to access beyond end of device [ 3.532471] sda4: rw=0, want=3, limit=2 [ 3.532472] hfsplus: unable to find HFS+ superblock [ 3.533312] qnx4: wrong fsid in superblock. [ 3.534077] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 3.534857] hfs: can't find a HFS filesystem on dev sda4 [ 3.561187] EXT2-fs (sdb2): error: unable to read superblock [ 3.562004] EXT4-fs (sdb2): unable to read superblock [ 3.562755] cramfs: wrong magic [ 3.566078] EXT3-fs (sdb2): error: unable to read superblock [ 3.567048] XFS (sdb2): bad magic number [ 3.567051] ffff8800d7eda000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.567080] ffff8800d7eda010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.567120] ffff8800d7eda020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.567160] ffff8800d7eda030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 3.567201] XFS (sdb2): Internal error xfs_sb_read_verify at line 637 of file fs/xfs/xfs_sb.c. Caller 0xffffffffa1053525 [ 3.567263] CPU: 0 PID: 281 Comm: kworker/0:1H Tainted: P O 3.12.2-desktop-1.mga4 #1 [ 3.567264] Hardware name: MSI MS-7851/Z87I (MS-7851), BIOS V1.4 09/30/2013 [ 3.567277] Workqueue: xfslogd xfs_buf_iodone_work [xfs] [ 3.567279] 0000000000000001 ffff88040a0c9d68 ffffffff8160f593 ffff88040badc800 [ 3.567281] ffff88040a0c9d80 ffffffffa105664b ffffffffa1053525 ffff88040a0c9db8 [ 3.567282] ffffffffa10566a5 0000027d00000000 ffff8800373da000 0000000000000016 [ 3.567283] Call Trace: [ 3.567287] [<ffffffff8160f593>] dump_stack+0x45/0x56 [ 3.567294] [<ffffffffa105664b>] xfs_error_report+0x3b/0x40 [xfs] [ 3.567299] [<ffffffffa1053525>] ? xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.567306] [<ffffffffa10566a5>] xfs_corruption_error+0x55/0x80 [xfs] [ 3.567317] [<ffffffffa10aa530>] xfs_sb_read_verify+0x130/0x150 [xfs] [ 3.567324] [<ffffffffa1053525>] ? xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.567329] [<ffffffffa1053525>] xfs_buf_iodone_work+0x85/0xf0 [xfs] [ 3.567332] [<ffffffff8107b2bc>] process_one_work+0x17c/0x410 [ 3.567334] [<ffffffff8107bea1>] worker_thread+0x121/0x3b0 [ 3.567335] [<ffffffff8107bd80>] ? rescuer_thread+0x320/0x320 [ 3.567337] [<ffffffff81082820>] kthread+0xc0/0xd0 [ 3.567338] [<ffffffff81082760>] ? kthread_create_on_node+0x120/0x120 [ 3.567341] [<ffffffff8161e74c>] ret_from_fork+0x7c/0xb0 [ 3.567342] [<ffffffff81082760>] ? kthread_create_on_node+0x120/0x120 [ 3.567343] XFS (sdb2): Corruption detected. Unmount and run xfs_repair [ 3.567382] XFS (sdb2): SB validate failed with error 22. [ 3.569313] FAT-fs (sdb2): bogus number of reserved sectors [ 3.569314] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 3.570192] FAT-fs (sdb2): bogus number of reserved sectors [ 3.570193] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 3.572677] MINIX-fs: unable to read superblock [ 3.573495] attempt to access beyond end of device [ 3.573497] sdb2: rw=0, want=3, limit=2 [ 3.573498] hfsplus: unable to find HFS+ superblock [ 3.574419] qnx4: wrong fsid in superblock. [ 3.575237] You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 3.576049] hfs: can't find a HFS filesystem on dev sdb2 [ 3.774464] [drm] Module unloaded [ 3.839154] MXM: GUID detected in BIOS [ 3.839343] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4090a2 [ 3.839345] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4) [ 3.839346] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 3.840558] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.840564] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.840564] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.941839] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.941840] nouveau [ VBIOS][0000:01:00.0] using image from PROM [ 3.941902] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.941903] nouveau [ VBIOS][0000:01:00.0] version 80.04.4b.00.15 [ 3.942040] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5 [ 3.942041] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 3.942042] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 3.965774] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.965777] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 3.965779] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.998604] [TTM] Zone kernel: Available graphics memory: 8189888 kiB [ 3.998606] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.998607] [TTM] Initializing pool allocator [ 3.998609] [TTM] Initializing DMA pool allocator [ 3.998614] nouveau [ DRM] VRAM: 2048 MiB [ 3.998614] nouveau [ DRM] GART: 1048576 MiB [ 3.998616] nouveau [ DRM] TMDS table version 2.0 [ 3.998617] nouveau [ DRM] DCB version 4.0 [ 3.998618] nouveau [ DRM] DCB outp 00: 01000f02 00020030 [ 3.998619] nouveau [ DRM] DCB outp 01: 02000f00 00000000 [ 3.998620] nouveau [ DRM] DCB outp 02: 08011f82 00020030 [ 3.998621] nouveau [ DRM] DCB outp 03: 02822f62 0f420010 [ 3.998621] nouveau [ DRM] DCB outp 05: 04833fb6 0f420010 [ 3.998622] nouveau [ DRM] DCB outp 06: 04033f72 00020010 [ 3.998623] nouveau [ DRM] DCB conn 00: 00001030 [ 3.998624] nouveau [ DRM] DCB conn 01: 00020131 [ 3.998625] nouveau [ DRM] DCB conn 02: 00002261 [ 3.998626] nouveau [ DRM] DCB conn 03: 00010346 [ 3.998627] nouveau [ DRM] DCB conn 04: 00000460 [ 3.999461] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.999461] [drm] No driver support for vblank timestamp query. [ 3.999546] nouveau W[ DRM] voltage table 0x50 unknown [ 3.999548] nouveau [ DRM] 4 available performance level(s) [ 3.999550] nouveau [ DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV [ 3.999551] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV [ 3.999552] nouveau [ DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV [ 3.999554] nouveau [ DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV [ 3.999555] nouveau [ DRM] c: [ 4.010962] nouveau [ DRM] MM: using COPY for buffer copies [ 4.096743] nouveau [ DRM] allocated 2560x1440 fb: 0x80000, bo ffff88040a117c00 [ 4.096782] fbcon: nouveaufb (fb0) is primary device [ 4.166427] Console: switching to colour frame buffer device 320x90 [ 4.168062] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 4.168063] nouveau 0000:01:00.0: registered panic notifier [ 4.168065] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
(In reply to Nicolas B from comment #10) Are you using Grub or Grub2? 1) Try to reinstall the nvidia pkg, then run drakconf and select the proprietary driver. 2) Then add these following two lines to /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT=" verbose splash=verbose rdblacklist=nouveau " GRUB_TERMINAL=console 3) Then run the following command and reboot. grub2-mkconfig -o /boot/grub2/grub.cfg Please share results. Thank you.
Using Grub 2. I followed your exact steps, result is as follow (did not work): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.2-desktop-1.mga4 (iurt@jonund.mageia.org) (gcc version 4.8.2 (GCC) ) #1 SMP Sat Nov 30 20:21:31 UTC 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=0f3414cb-04f2-40c7-91d7-87914170fa73 ro verbose splash=verbose rdblacklist=nouveau resume=UUID=05609a32-75df-477f-85af-5296eb1a0ca6 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb551fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb552000-0x00000000cb558fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cb559000-0x00000000cb99dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb99e000-0x00000000cbf2efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cbf2f000-0x00000000dddacfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dddad000-0x00000000dde36fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dde37000-0x00000000dde92fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dde93000-0x00000000ddfc3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddfc4000-0x00000000deffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: MSI MS-7851/Z87I (MS-7851), BIOS V1.4 09/30/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0410000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0418000000 mask 7FFC000000 write-back [ 0.000000] 4 base 041C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 041E000000 mask 7FFF000000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd780-0x000fd78f] mapped at [ffff8800000fd780] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01efa000, 0x01efafff] PGTABLE [ 0.000000] BRK [0x01efb000, 0x01efbfff] PGTABLE [ 0.000000] BRK [0x01efc000, 0x01efcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff] [ 0.000000] [mem 0x41ee00000-0x41effffff] page 2M [ 0.000000] BRK [0x01efd000, 0x01efdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff] [ 0.000000] [mem 0x41c000000-0x41edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcb551fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcb3fffff] page 2M [ 0.000000] [mem 0xcb400000-0xcb551fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcb559000-0xcb99dfff] [ 0.000000] [mem 0xcb559000-0xcb5fffff] page 4k [ 0.000000] [mem 0xcb600000-0xcb7fffff] page 2M [ 0.000000] [mem 0xcb800000-0xcb99dfff] page 4k [ 0.000000] BRK [0x01efe000, 0x01efefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xcbf2f000-0xdddacfff] [ 0.000000] [mem 0xcbf2f000-0xcbffffff] page 4k [ 0.000000] [mem 0xcc000000-0xddbfffff] page 2M [ 0.000000] [mem 0xddc00000-0xdddacfff] page 4k [ 0.000000] BRK [0x01eff000, 0x01efffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdde37000-0xdde92fff] [ 0.000000] [mem 0xdde37000-0xdde92fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdefff000-0xdeffffff] [ 0.000000] [mem 0xdefff000-0xdeffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x36db4000-0x376d1fff] [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000ddf97080 00084 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000ddfa48d0 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000ddf971a0 0D72B (v02 ALASKA A M I 00000031 INTL 20120711) [ 0.000000] ACPI: FACS 00000000ddfc2080 00040 [ 0.000000] ACPI: APIC 00000000ddfa49e0 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000ddfa4a58 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: ASF! 00000000ddfa4aa0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: LPIT 00000000ddfa4b48 0005C (v01 ALASKA A M I 00000000 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000ddfa4ba8 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000ddfa50e8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 00000000ddfa5bc0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000ddfa5c00 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000ddfa5c38 0036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 00000000ddfa5fa8 034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000ddfa9490 00A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff] [ 0.000000] NODE_DATA [mem 0x41eff6000-0x41effafff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xcb551fff] [ 0.000000] node 0: [mem 0xcb559000-0xcb99dfff] [ 0.000000] node 0: [mem 0xcbf2f000-0xdddacfff] [ 0.000000] node 0: [mem 0xdde37000-0xdde92fff] [ 0.000000] node 0: [mem 0xdefff000-0xdeffffff] [ 0.000000] node 0: [mem 0x100000000-0x41effffff] [ 0.000000] On node 0 totalpages: 4179982 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14114 pages used for memmap [ 0.000000] DMA32 zone: 903282 pages, LIFO batch:31 [ 0.000000] Normal zone: 51136 pages used for memmap [ 0.000000] Normal zone: 3272704 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb552000-0xcb558fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb99e000-0xcbf2efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdddad000-0xdde36fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdde93000-0xddfc3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xddfc4000-0xdeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s84800 r8192 d21696 u524288 [ 0.000000] pcpu-alloc: s84800 r8192 d21696 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4114647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=0f3414cb-04f2-40c7-91d7-87914170fa73 ro verbose splash=verbose rdblacklist=nouveau resume=UUID=05609a32-75df-477f-85af-5296eb1a0ca6 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16366212K/16719928K available (6282K kernel code, 870K rwdata, 3020K rodata, 1228K init, 912K bss, 353716K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3400.101 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.20 BogoMIPS (lpj=3400101) [ 0.000145] pid_max: default: 32768 minimum: 301 [ 0.000226] Security Framework initialized [ 0.000300] TOMOYO Linux initialized [ 0.001088] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003294] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004260] Mount-cache hash table entries: 256 [ 0.004435] Initializing cgroup subsys devices [ 0.004506] Initializing cgroup subsys freezer [ 0.004577] Initializing cgroup subsys net_cls [ 0.004648] Initializing cgroup subsys blkio [ 0.004731] CPU: Physical Processor ID: 0 [ 0.004817] CPU: Processor Core ID: 0 [ 0.005621] mce: CPU supports 9 MCE banks [ 0.005700] CPU0: Thermal monitoring enabled (TM1) [ 0.005779] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 tlb_flushall_shift: 6 [ 0.005981] Freeing SMP alternatives memory: 24K (ffffffff81e0e000 - ffffffff81e14000) [ 0.006663] ACPI: Core revision 20130725 [ 0.012143] ACPI: All ACPI Tables successfully acquired [ 0.031767] ftrace: allocating 23485 entries in 92 pages [ 0.038850] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.048920] smpboot: CPU0: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03) [ 0.049168] TSC deadline timer enabled [ 0.049173] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.049524] ... version: 3 [ 0.049594] ... bit width: 48 [ 0.049663] ... generic registers: 8 [ 0.049733] ... value mask: 0000ffffffffffff [ 0.049804] ... max period: 0000ffffffffffff [ 0.049875] ... fixed-purpose events: 3 [ 0.049944] ... event mask: 00000007000000ff [ 0.050785] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK [ 0.092845] Brought up 4 CPUs [ 0.092916] smpboot: Total of 4 processors activated (27200.80 BogoMIPS) [ 0.095450] devtmpfs: initialized [ 0.102601] PM: Registering ACPI NVS region [mem 0xcb552000-0xcb558fff] (28672 bytes) [ 0.102688] PM: Registering ACPI NVS region [mem 0xdde93000-0xddfc3fff] (1249280 bytes) [ 0.103215] xor: automatically using best checksumming function: [ 0.113034] avx : 28992.000 MB/sec [ 0.113104] pinctrl core: initialized pinctrl subsystem [ 0.113201] RTC time: 16:32:48, date: 12/04/13 [ 0.113289] NET: Registered protocol family 16 [ 0.113404] cpuidle: using governor ladder [ 0.113473] cpuidle: using governor menu [ 0.113560] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.113646] ACPI: bus type PCI registered [ 0.113715] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.113814] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.113903] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.118157] PCI: Using configuration type 1 for base access [ 0.118646] bio: create slab <bio-0> at 0 [ 0.135036] raid6: sse2x1 10683 MB/s [ 0.152040] raid6: sse2x2 13625 MB/s [ 0.169036] raid6: sse2x4 15894 MB/s [ 0.186037] raid6: avx2x1 21062 MB/s [ 0.203036] raid6: avx2x2 24316 MB/s [ 0.220036] raid6: avx2x4 28453 MB/s [ 0.220105] raid6: using algorithm avx2x4 (28453 MB/s) [ 0.220175] raid6: using avx2x2 recovery algorithm [ 0.220267] ACPI: Added _OSI(Module Device) [ 0.220337] ACPI: Added _OSI(Processor Device) [ 0.220406] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.220476] ACPI: Added _OSI(Processor Aggregator Device) [ 0.221688] ACPI: EC: Look up EC in DSDT [ 0.222979] ACPI: Executed 1 blocks of module-level executable AML code [ 0.224831] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.230153] ACPI: SSDT 00000000dde2cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.230630] ACPI: Dynamic OEM Table Load: [ 0.230803] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.235227] ACPI: SSDT 00000000dde2c618 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.235746] ACPI: Dynamic OEM Table Load: [ 0.235919] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.241158] ACPI: SSDT 00000000dde2bd98 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.241633] ACPI: Dynamic OEM Table Load: [ 0.241805] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.246468] ACPI: Interpreter enabled [ 0.246540] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.246733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.246934] ACPI: (supports S0 S3 S4 S5) [ 0.247003] ACPI: Using IOAPIC for interrupt routing [ 0.247088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.247292] ACPI: No dock devices found. [ 0.252196] ACPI: Power Resource [FN00] (off) [ 0.252305] ACPI: Power Resource [FN01] (off) [ 0.252412] ACPI: Power Resource [FN02] (off) [ 0.252518] ACPI: Power Resource [FN03] (off) [ 0.252623] ACPI: Power Resource [FN04] (off) [ 0.253143] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.253356] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.253542] acpi PNP0A08:00: ACPI _OSC control (0x18) granted [ 0.253850] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5) [ 0.253928] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5) [ 0.254051] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5) [ 0.254123] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5) [ 0.254210] PCI host bridge to bus 0000:00 [ 0.254281] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.254352] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.254425] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.254497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.254570] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.254643] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.254716] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.254790] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.254863] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.254936] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.255009] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.255087] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.255139] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.255161] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.255193] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.255300] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.255316] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit] [ 0.255365] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.255391] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.255480] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.255496] pci 0000:00:16.0: reg 0x10: [mem 0xf7416000-0xf741600f 64bit] [ 0.255548] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.255598] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.255615] pci 0000:00:1a.0: reg 0x10: [mem 0xf7414000-0xf74143ff] [ 0.255689] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.255725] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.255812] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.255864] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.255893] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.255980] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.256032] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.256061] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.256147] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.256199] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.256228] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.256316] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.256368] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.256397] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.256490] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.256507] pci 0000:00:1d.0: reg 0x10: [mem 0xf7413000-0xf74133ff] [ 0.256581] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.256617] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.256708] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.256834] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.256846] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.256852] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.256858] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.256864] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.256870] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.256876] pci 0000:00:1f.2: reg 0x24: [mem 0xf7412000-0xf74127ff] [ 0.256905] pci 0000:00:1f.2: PME# supported from D3hot [ 0.256942] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.256954] pci 0000:00:1f.3: reg 0x10: [mem 0xf7411000-0xf74110ff 64bit] [ 0.256970] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.257045] pci 0000:01:00.0: [10de:1189] type 00 class 0x030000 [ 0.257053] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.257062] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.257070] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.257076] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.257082] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.257122] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.257212] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.257220] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.258312] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.258382] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.258384] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.258386] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.258433] acpiphp: Slot [1] registered [ 0.258504] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.258640] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.258655] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.258680] pci 0000:03:00.0: reg 0x18: [mem 0xf7300000-0xf7300fff 64bit] [ 0.258696] pci 0000:03:00.0: reg 0x20: [mem 0xf2200000-0xf2203fff 64bit pref] [ 0.258764] pci 0000:03:00.0: supports D1 D2 [ 0.258765] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.258793] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.260314] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.260385] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.260388] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] [ 0.260392] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.260455] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.260470] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.260495] pci 0000:04:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit] [ 0.260512] pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.260580] pci 0000:04:00.0: supports D1 D2 [ 0.260581] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260608] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.262314] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.262386] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.262388] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff] [ 0.262392] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.262463] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000 [ 0.262495] pci 0000:05:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit] [ 0.262648] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.262682] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.264319] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.264392] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.264419] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.265000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.265667] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.266334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.267000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.267664] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.268449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.269229] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270010] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.270885] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.271062] ACPI: \_SB_.PCI0: notify handler is installed [ 0.271103] Found 1 acpi root devices [ 0.271144] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.271232] vgaarb: loaded [ 0.271298] vgaarb: bridge control possible 0000:01:00.0 [ 0.271397] SCSI subsystem initialized [ 0.271487] libata version 3.00 loaded. [ 0.271528] PCI: Using ACPI for IRQ routing [ 0.272705] PCI: pci_cache_line_size set to 64 bytes [ 0.272744] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.272745] e820: reserve RAM buffer [mem 0xcb552000-0xcbffffff] [ 0.272745] e820: reserve RAM buffer [mem 0xcb99e000-0xcbffffff] [ 0.272746] e820: reserve RAM buffer [mem 0xdddad000-0xdfffffff] [ 0.272747] e820: reserve RAM buffer [mem 0xdde93000-0xdfffffff] [ 0.272748] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.272749] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.272789] NetLabel: Initializing [ 0.272858] NetLabel: domain hash size = 128 [ 0.272928] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.273002] NetLabel: unlabeled traffic allowed by default [ 0.273090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.273627] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.275710] Switched to clocksource hpet [ 0.278256] pnp: PnP ACPI init [ 0.278330] ACPI: bus type PNP registered [ 0.278439] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.278513] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.278520] pnp 00:01: [dma 4] [ 0.278529] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.278537] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.278603] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.278628] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.278690] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.278768] system 00:05: [io 0xffff] has been reserved [ 0.278838] system 00:05: [io 0xffff] has been reserved [ 0.278909] system 00:05: [io 0xffff] has been reserved [ 0.278980] system 00:05: [io 0x1c00-0x1cfe] has been reserved [ 0.279052] system 00:05: [io 0x1d00-0x1dfe] has been reserved [ 0.279123] system 00:05: [io 0x1e00-0x1efe] has been reserved [ 0.279195] system 00:05: [io 0x1f00-0x1ffe] has been reserved [ 0.279267] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.279340] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.279412] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.279425] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.279447] system 00:07: [io 0x1854-0x1857] has been reserved [ 0.279519] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.279589] system 00:08: [io 0x0a00-0x0a0f] has been reserved [ 0.279662] system 00:08: [io 0x0a10-0x0a1f] has been reserved [ 0.279738] system 00:08: [io 0x0a20-0x0a2f] has been reserved [ 0.279810] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.279902] pnp 00:09: [dma 0 disabled] [ 0.279925] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.279997] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.280071] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.280317] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.280390] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.280463] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.280536] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.280609] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.280682] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.280759] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.280832] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.280906] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.280979] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.281053] system 00:0b: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.281125] system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.281199] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.281330] pnp: PnP ACPI: found 12 devices [ 0.281399] ACPI: bus type PNP unregistered [ 0.287000] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.287071] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.287145] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.287218] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.287306] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.287383] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.287454] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.287528] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] [ 0.287602] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.287691] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.287765] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.287839] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff] [ 0.287914] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.288003] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.288075] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.288153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.288154] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.288155] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.288156] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.288157] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.288158] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.288159] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.288160] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.288161] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.288162] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.288163] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.288163] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.288164] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.288165] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.288166] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] [ 0.288167] pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.288168] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.288169] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff] [ 0.288170] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.288171] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.288187] NET: Registered protocol family 2 [ 0.288406] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.293921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.294085] TCP: Hash tables configured (established 131072 bind 65536) [ 0.294168] TCP: reno registered [ 0.294247] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.294354] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.294478] NET: Registered protocol family 1 [ 0.294836] pci 0000:01:00.0: Boot video device [ 0.294851] PCI: CLS 64 bytes, default 64 [ 0.294871] Trying to unpack rootfs image as initramfs... [ 0.352446] Freeing initrd memory: 9336K (ffff880036db4000 - ffff8800376d2000) [ 0.352535] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.352608] software IO TLB [mem 0xd9dad000-0xdddad000] (64MB) mapped at [ffff8800d9dad000-ffff8800dddacfff] [ 0.352928] audit: initializing netlink socket (disabled) [ 0.353005] type=2000 audit(1386174768.322:1): initialized [ 0.368002] bounce pool size: 64 pages [ 0.368077] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.368934] zbud: loaded [ 0.369098] VFS: Disk quotas dquot_6.5.2 [ 0.369186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.369471] bio: create slab <bio-1> at 1 [ 0.369612] Btrfs loaded [ 0.369687] msgmni has been set to 31983 [ 0.369943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.370059] io scheduler noop registered [ 0.370131] io scheduler deadline registered [ 0.370219] io scheduler cfq registered (default) [ 0.370393] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.370667] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.370745] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.370841] intel_idle: MWAIT substates: 0x42120 [ 0.370842] intel_idle: v0.4 model 0x3C [ 0.370842] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.370911] GHES: HEST is not enabled! [ 0.371007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.391575] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.391882] Linux agpgart interface v0.103 [ 0.392592] brd: module loaded [ 0.392749] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.392770] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X [ 0.395020] ahci 0000:00:1f.2: version 3.0 [ 0.395077] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.395119] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 0.395206] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.395290] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.396863] scsi0 : ahci [ 0.397016] scsi1 : ahci [ 0.397192] scsi2 : ahci [ 0.397392] scsi3 : ahci [ 0.397545] scsi4 : ahci [ 0.397681] scsi5 : ahci [ 0.397763] ata1: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412100 irq 42 [ 0.397849] ata2: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412180 irq 42 [ 0.397935] ata3: DUMMY [ 0.398001] ata4: DUMMY [ 0.398068] ata5: DUMMY [ 0.398134] ata6: DUMMY [ 0.398231] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.400610] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.400688] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.400817] mousedev: PS/2 mouse device common for all mice [ 0.400940] rtc_cmos 00:06: RTC can wake from S4 [ 0.401107] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.401200] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.401290] ledtrig-cpu: registered to indicate activity on CPUs [ 0.401421] TCP: cubic registered [ 0.401495] Key type dns_resolver registered [ 0.401565] mpls_gso: MPLS GSO support [ 0.401767] registered taskstats version 1 [ 0.402484] Magic number: 9:511:539 [ 0.402619] rtc_cmos 00:06: setting system clock to 2013-12-04 16:32:49 UTC (1386174769) [ 0.402712] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.402783] EDD information not available. [ 0.402876] PM: Checking hibernation image partition UUID=05609a32-75df-477f-85af-5296eb1a0ca6 [ 0.702504] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.702590] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.702891] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.702893] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133 [ 0.702967] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.703335] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.703337] ata1.00: configured for UDMA/133 [ 0.703506] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 0.703661] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.703778] sd 0:0:0:0: [sda] Write Protect is off [ 0.703850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.703856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.704388] sda: sda1 sda2 sda3 sda4 < sda5 > sda3: <bsd:bad subpartition - ignored bad subpartition - ignored > [ 0.704635] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.704637] ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133 [ 0.704715] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.704747] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.705056] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.705058] ata2.00: configured for UDMA/133 [ 0.705200] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 0.705346] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.705456] sd 1:0:0:0: [sdb] Write Protect is off [ 0.705539] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.705545] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.706058] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 0.706260] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.813987] PM: Hibernation image not present or could not be loaded. [ 0.814469] Freeing unused kernel memory: 1228K (ffffffff81cdb000 - ffffffff81e0e000) [ 0.814556] Write protecting the kernel read-only data: 12288k [ 0.817243] Freeing unused kernel memory: 1900K (ffff880001625000 - ffff880001800000) [ 0.818736] Freeing unused kernel memory: 1076K (ffff880001af3000 - ffff880001c00000) [ 0.843187] dracut: dracut-034 [ 0.885359] systemd-udevd[193]: starting version 208 [ 0.907012] dracut: Starting plymouth daemon [ 0.925504] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 0.925609] ACPI: Power Button [PWRB] [ 0.925716] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 0.925816] ACPI: Power Button [PWRF] [ 0.927472] wmi: Mapper loaded [ 0.938109] ACPI: bus type USB registered [ 0.938191] usbcore: registered new interface driver usbfs [ 0.938266] usbcore: registered new interface driver hub [ 0.938867] usbcore: registered new device driver usb [ 0.941892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.942304] ehci-pci: EHCI PCI platform driver [ 0.943002] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.943010] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.943086] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.943188] ehci-pci 0000:00:1a.0: debug port 2 [ 0.947147] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.947167] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7414000 [ 0.952540] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.952645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.952724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952809] usb usb1: Product: EHCI Host Controller [ 0.952881] usb usb1: Manufacturer: Linux 3.12.2-desktop-1.mga4 ehci_hcd [ 0.952955] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.953103] hub 1-0:1.0: USB hub found [ 0.953180] hub 1-0:1.0: 2 ports detected [ 0.953403] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.953407] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.953489] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.953593] ehci-pci 0000:00:1d.0: debug port 2 [ 0.957549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.957562] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7413000 [ 0.963328] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.963425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.963499] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.963585] usb usb2: Product: EHCI Host Controller [ 0.963656] usb usb2: Manufacturer: Linux 3.12.2-desktop-1.mga4 ehci_hcd [ 0.963729] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.963867] hub 2-0:1.0: USB hub found [ 0.963940] hub 2-0:1.0: 2 ports detected [ 0.964160] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.964163] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.964243] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.964418] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.964433] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X [ 0.964478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.964552] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.964639] usb usb3: Product: xHCI Host Controller [ 0.964710] usb usb3: Manufacturer: Linux 3.12.2-desktop-1.mga4 xhci_hcd [ 0.964783] usb usb3: SerialNumber: 0000:00:14.0 [ 0.964925] hub 3-0:1.0: USB hub found [ 0.965013] hub 3-0:1.0: 14 ports detected [ 0.967315] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.967393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.967504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.967577] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.967663] usb usb4: Product: xHCI Host Controller [ 0.967733] usb usb4: Manufacturer: Linux 3.12.2-desktop-1.mga4 xhci_hcd [ 0.967806] usb usb4: SerialNumber: 0000:00:14.0 [ 0.967989] hub 4-0:1.0: USB hub found [ 0.968069] hub 4-0:1.0: 6 ports detected [ 1.254205] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.354119] tsc: Refined TSC clocksource calibration: 3399.996 MHz [ 1.368435] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.368509] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.368817] hub 1-1:1.0: USB hub found [ 1.369046] hub 1-1:1.0: 6 ports detected [ 1.465391] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 1.465394] PM: Marking nosave pages: [mem 0xcb552000-0xcb558fff] [ 1.465395] PM: Marking nosave pages: [mem 0xcb99e000-0xcbf2efff] [ 1.465410] PM: Marking nosave pages: [mem 0xdddad000-0xdde36fff] [ 1.465412] PM: Marking nosave pages: [mem 0xdde93000-0xdeffefff] [ 1.465454] PM: Marking nosave pages: [mem 0xdf000000-0xffffffff] [ 1.465647] PM: Basic memory bitmaps created [ 1.478039] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.502810] PM: Basic memory bitmaps freed [ 1.504112] PM: Starting manual resume from disk [ 1.504184] PM: Hibernation image partition 8:21 present [ 1.504185] PM: Looking for hibernation image. [ 1.504326] PM: Image not found (code -22) [ 1.504328] PM: Hibernation image not present or could not be loaded. [ 1.511871] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.527186] dracut: Checking ext4: /dev/disk/by-uuid/0f3414cb-04f2-40c7-91d7-87914170fa73 [ 1.527367] dracut: issuing e2fsck -a /dev/disk/by-uuid/0f3414cb-04f2-40c7-91d7-87914170fa73 [ 1.532809] dracut: /dev/disk/by-uuid/0f3414cb-04f2-40c7-91d7-87914170fa73: clean, 162999/788416 files, 1541076/3148484 blocks [ 1.533724] dracut: Mounting /dev/disk/by-uuid/0f3414cb-04f2-40c7-91d7-87914170fa73 with -o acl,relatime,ro [ 1.535348] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl [ 1.539406] dracut: Mounted root filesystem /dev/sdb1 [ 1.571159] dracut: Switching root [ 1.572278] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 1.593291] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.593359] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.593679] hub 2-1:1.0: USB hub found [ 1.593787] hub 2-1:1.0: 8 ports detected [ 1.595762] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time. [ 1.596824] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 1.606808] systemd[1]: Inserted module 'autofs4' [ 1.620536] NET: Registered protocol family 10 [ 1.620714] systemd[1]: Inserted module 'ipv6' [ 1.620962] systemd[1]: Set hostname to <big.clkroot.net>. [ 1.664124] systemd[1]: Starting Collect Read-Ahead Data... [ 1.665437] systemd[1]: Starting Replay Read-Ahead Data... [ 1.666115] systemd[1]: Starting Login Prompts. [ 1.666219] systemd[1]: Reached target Login Prompts. [ 1.666304] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 1.666334] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.666347] systemd[1]: Starting Network is Online. [ 1.666596] systemd[1]: Reached target Network is Online. [ 1.666608] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 1.666755] systemd-readahead[447]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day. [ 1.666870] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.666878] systemd[1]: Starting Delayed Shutdown Socket. [ 1.667044] systemd[1]: Listening on Delayed Shutdown Socket. [ 1.667053] systemd[1]: Starting Encrypted Volumes. [ 1.667208] systemd[1]: Reached target Encrypted Volumes. [ 1.667225] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 1.667389] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.667402] systemd[1]: Starting Journal Socket. [ 1.667565] systemd[1]: Listening on Journal Socket. [ 1.667578] systemd[1]: Starting Set default kernel console loglevel... [ 1.668570] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.669235] systemd[1]: Mounting POSIX Message Queue File System... [ 1.669760] systemd[1]: Mounting RPC Pipe File System... [ 1.671885] systemd[1]: Mounting Debug File System... [ 1.672519] systemd[1]: Mounting Huge Pages File System... [ 1.673177] systemd[1]: Starting Journal Service... [ 1.673510] systemd[1]: Started Journal Service. [ 1.674162] systemd[1]: Expecting device dev-disk-by\x2duuid-05609a32\x2d75df\x2d477f\x2d85af\x2d5296eb1a0ca6.device... [ 1.674186] systemd[1]: Expecting device dev-disk-by\x2duuid-2603924b\x2d5d48\x2d4e3d\x2dbe05\x2dda81f1268b32.device... [ 1.674248] systemd[1]: Mounting Temporary Directory... [ 1.674449] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 1.674989] systemd[1]: Started Import network configuration from initramfs. [ 1.674999] systemd[1]: Starting Configure read-only root support... [ 1.675589] systemd[1]: Starting udev Kernel Socket. [ 1.675635] systemd[1]: Listening on udev Kernel Socket. [ 1.675648] systemd[1]: Starting udev Control Socket. [ 1.675700] systemd[1]: Listening on udev Control Socket. [ 1.675715] systemd[1]: Starting udev Coldplug all Devices... [ 1.676584] systemd[1]: Expecting device dev-disk-by\x2duuid-f759095c\x2d30cd\x2d444b\x2d8814\x2d0b44b88b862a.device... [ 1.676607] systemd[1]: Expecting device dev-disk-by\x2duuid-4A70BF0D70BEFEAF.device... [ 1.676618] systemd[1]: Expecting device dev-disk-by\x2duuid-92CCC45FCCC43F6B.device... [ 1.676629] systemd[1]: Starting Root Slice. [ 1.676659] systemd[1]: Created slice Root Slice. [ 1.676668] systemd[1]: Starting User and Session Slice. [ 1.676722] systemd[1]: Created slice User and Session Slice. [ 1.676731] systemd[1]: Starting System Slice. [ 1.676747] systemd[1]: Created slice System Slice. [ 1.676756] systemd[1]: Starting system-getty.slice. [ 1.676802] systemd[1]: Created slice system-getty.slice. [ 1.676811] systemd[1]: Starting Slices. [ 1.676820] systemd[1]: Reached target Slices. [ 1.677370] systemd-journald[455]: Vacuuming done, freed 0 bytes [ 1.679449] systemd[1]: Started Collect Read-Ahead Data. [ 1.679563] systemd[1]: Started Replay Read-Ahead Data. [ 1.679728] systemd[1]: Started Set default kernel console loglevel. [ 1.680294] systemd[1]: Mounted POSIX Message Queue File System. [ 1.680398] systemd[1]: Mounted Debug File System. [ 1.680515] systemd[1]: Mounted Huge Pages File System. [ 1.680620] systemd[1]: Mounted Temporary Directory. [ 1.681313] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.681645] systemd[1]: Starting Create static device nodes in /dev... [ 1.682224] systemd[1]: Starting Load legacy module configuration... [ 1.682703] systemd[1]: Starting Setup Virtual Console... [ 1.684374] systemd[1]: Started Set Up Additional Binary Formats. [ 1.684718] systemd[1]: Starting Load Kernel Modules... [ 1.686194] systemd[1]: Starting Apply Kernel Variables... [ 1.686566] systemd[1]: Starting File System Check on Root Device... [ 1.694262] RPC: Registered named UNIX socket transport module. [ 1.694264] RPC: Registered udp transport module. [ 1.694265] RPC: Registered tcp transport module. [ 1.694266] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.698324] ACPI: Requesting acpi_cpufreq [ 1.701028] EXT4-fs (sdb1): re-mounted. Opts: acl [ 1.711819] systemd-udevd[507]: starting version 208 [ 1.735618] ACPI: Fan [FAN0] (off) [ 1.735639] ACPI: Fan [FAN1] (off) [ 1.735653] ACPI: Fan [FAN2] (off) [ 1.735665] ACPI: Fan [FAN3] (off) [ 1.735678] ACPI: Fan [FAN4] (off) [ 1.735939] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.735940] ACPI: Thermal Zone [TZ00] (28 C) [ 1.736072] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.736073] ACPI: Thermal Zone [TZ01] (30 C) [ 1.737457] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.739070] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 1.739074] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.739077] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 1.739079] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 1.739080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.739081] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 1.739082] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 1.739083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.739084] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.741496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.741501] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.741504] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it! [ 1.743294] r8169 0000:03:00.0: irq 44 for MSI/MSI-X [ 1.743400] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90001856000, d4:3d:7e:bf:d5:91, XID 0c000800 IRQ 44 [ 1.743401] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.743415] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.743417] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.743420] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it! [ 1.745274] r8169 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.745372] r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc90001858000, d4:3d:7e:bf:d5:90, XID 0c000800 IRQ 45 [ 1.745374] r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.747867] usb 3-6: new low-speed USB device number 2 using xhci_hcd [ 1.754301] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251) [ 1.754305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.755438] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x16 [ 1.755462] cfg80211: Calling CRDA to update world regulatory domain [ 1.756472] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x16 [ 1.756480] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x16 [ 1.756487] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x16 [ 1.756540] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.760286] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 1.760287] Copyright(c) 2003-2013 Intel Corporation [ 1.760308] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it! [ 1.760393] iwlwifi 0000:05:00.0: irq 46 for MSI/MSI-X [ 1.763099] iwlwifi 0000:05:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm [ 1.776287] hda_intel: Disabling MSI [ 1.776292] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 1.776315] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 1.789098] iTCO_vendor_support: vendor-support=0 [ 1.789327] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 1.789502] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.789526] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 1.789595] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 1.790575] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 1.790631] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S [ 1.790772] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S [ 1.797237] usb 3-6: New USB device found, idVendor=051d, idProduct=0002 [ 1.797239] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.797240] usb 3-6: Product: Back-UPS ES 550G FW:904.W1 .D USB FW:W1 [ 1.797241] usb 3-6: Manufacturer: APC [ 1.797242] usb 3-6: SerialNumber: 4B1315P16122 [ 1.797289] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.798889] systemd-udevd[516]: renamed network interface eth0 to enp3s0 [ 1.802889] systemd-udevd[522]: renamed network interface eth1 to enp4s0 [ 1.808900] Adding 193212k swap on /dev/sda5. Priority:-1 extents:1 across:193212k SSFS [ 1.810748] fuse init (API version 7.22) [ 1.819712] [drm] Initialized drm 1.1.0 20060810 [ 1.821495] Adding 4087272k swap on /dev/sdb5. Priority:-2 extents:1 across:4087272k SSFS [ 1.854059] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl [ 1.951745] usb 3-7: new full-speed USB device number 3 using xhci_hcd [ 1.963751] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc [ 1.963753] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.966761] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8 [ 1.966794] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 1.966817] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 [ 1.966837] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5 [ 2.004797] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.013761] systemd-udevd[512]: renamed network interface wlan0 to wlp5s0 [ 2.077460] nvidia: module license 'NVIDIA' taints kernel. [ 2.077463] Disabling lock debugging due to kernel taint [ 2.082257] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 2.082354] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0 [ 2.082358] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013 [ 2.116671] usb 3-10: new high-speed USB device number 4 using xhci_hcd [ 2.127936] usb 3-10: New USB device found, idVendor=0451, idProduct=8043 [ 2.127938] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.127940] usb 3-10: SerialNumber: F00208691856 [ 2.128235] hub 3-10:1.0: USB hub found [ 2.128259] hub 3-10:1.0: 4 ports detected [ 2.143755] hidraw: raw HID events driver (C) Jiri Kosina [ 2.152252] Bluetooth: Core ver 2.16 [ 2.152262] NET: Registered protocol family 31 [ 2.152263] Bluetooth: HCI device and connection manager initialized [ 2.152268] Bluetooth: HCI socket layer initialized [ 2.152269] Bluetooth: L2CAP socket layer initialized [ 2.152272] Bluetooth: SCO socket layer initialized [ 2.154138] usbcore: registered new interface driver btusb [ 2.168575] Bluetooth: hci0: read Intel version: 370710018002030d2e [ 2.168577] Bluetooth: hci0: Intel device is already patched. patch num: 2e [ 2.230847] usb 4-6: new SuperSpeed USB device number 2 using xhci_hcd [ 2.241844] usb 4-6: New USB device found, idVendor=0451, idProduct=8041 [ 2.241846] usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.243496] hub 4-6:1.0: USB hub found [ 2.243512] hub 4-6:1.0: 4 ports detected [ 2.263157] usbcore: registered new interface driver usbhid [ 2.263159] usbhid: USB HID core driver [ 2.353602] Switched to clocksource tsc [ 2.377358] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550G FW:904.W1 .D USB FW:W1 ] on usb-0000:00:14.0-6/input0 [ 2.401499] usb 3-10.4: new full-speed USB device number 5 using xhci_hcd [ 2.415463] usb 3-10.4: New USB device found, idVendor=046d, idProduct=c52b [ 2.415465] usb 3-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.415466] usb 3-10.4: Product: USB Receiver [ 2.415467] usb 3-10.4: Manufacturer: Logitech [ 2.428859] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input2 [ 3.018993] [drm] Module unloaded [ 3.077324] MXM: GUID detected in BIOS [ 3.077512] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4090a2 [ 3.077514] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4) [ 3.077515] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 3.078727] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.078732] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.078733] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.180865] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.180867] nouveau [ VBIOS][0000:01:00.0] using image from PROM [ 3.180928] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.180930] nouveau [ VBIOS][0000:01:00.0] version 80.04.4b.00.15 [ 3.181070] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5 [ 3.181071] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 3.181072] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 3.204795] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 3.204798] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 3.204800] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.237137] [TTM] Zone kernel: Available graphics memory: 8189888 kiB [ 3.237138] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.237139] [TTM] Initializing pool allocator [ 3.237153] [TTM] Initializing DMA pool allocator [ 3.237159] nouveau [ DRM] VRAM: 2048 MiB [ 3.237160] nouveau [ DRM] GART: 1048576 MiB [ 3.237162] nouveau [ DRM] TMDS table version 2.0 [ 3.237163] nouveau [ DRM] DCB version 4.0 [ 3.237164] nouveau [ DRM] DCB outp 00: 01000f02 00020030 [ 3.237165] nouveau [ DRM] DCB outp 01: 02000f00 00000000 [ 3.237166] nouveau [ DRM] DCB outp 02: 08011f82 00020030 [ 3.237167] nouveau [ DRM] DCB outp 03: 02822f62 0f420010 [ 3.237168] nouveau [ DRM] DCB outp 05: 04833fb6 0f420010 [ 3.237168] nouveau [ DRM] DCB outp 06: 04033f72 00020010 [ 3.237169] nouveau [ DRM] DCB conn 00: 00001030 [ 3.237171] nouveau [ DRM] DCB conn 01: 00020131 [ 3.237171] nouveau [ DRM] DCB conn 02: 00002261 [ 3.237172] nouveau [ DRM] DCB conn 03: 00010346 [ 3.237173] nouveau [ DRM] DCB conn 04: 00000460 [ 3.237930] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 3.237931] [drm] No driver support for vblank timestamp query. [ 3.238022] nouveau W[ DRM] voltage table 0x50 unknown [ 3.238025] nouveau [ DRM] 4 available performance level(s) [ 3.238027] nouveau [ DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV [ 3.238028] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV [ 3.238030] nouveau [ DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV [ 3.238031] nouveau [ DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV [ 3.238032] nouveau [ DRM] c: [ 3.249502] nouveau [ DRM] MM: using COPY for buffer copies [ 3.335465] nouveau [ DRM] allocated 2560x1440 fb: 0x80000, bo ffff88040aa43c00 [ 3.335507] fbcon: nouveaufb (fb0) is primary device [ 3.411267] Console: switching to colour frame buffer device 320x90 [ 3.412902] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.412903] nouveau 0000:01:00.0: registered panic notifier [ 3.412906] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
(In reply to Nicolas B from comment #12) echo "blacklist nouveau" >> /etc/modprobe.d/blacklist-mga.conf Then reboot. Also please share the output of: rpm -qa | grep nvidia You should have something similar to this: nvidia-current-kernel-desktop-latest-319.17-7.mga3.nonfree nvidia-current-kernel-desktop586-latest-319.17-7.mga3.nonfree x11-driver-video-nvidia-current-319.17-1.mga3.nonfree nvidia-current-kernel-3.8.13.4-desktop586-1.mga3-319.17-7.mga3.nonfree nvidia-current-kernel-3.8.13.4-desktop-1.mga3-319.17-7.mga3.nonfree nvidia-current-doc-html-319.17-1.mga3.nonfree dkms-nvidia-current-319.17-1.mga3.nonfree By the way, please paste only the important lines (30 or so). Or upload as attachment if you want to paste a long thing please. Ty.
I've already had a blacklist done in modprobe.d. My output of rpm -qa: nvidia-current-doc-html-331.20-7.mga4.nonfree nvidia-current-kernel-desktop-latest-331.20-8.mga4.nonfree dkms-nvidia-current-331.20-7.mga4.nonfree nvidia-current-kernel-3.12.2-desktop-1.mga4-331.20-8.mga4.nonfree nvidia-current-kernel-3.12.0-desktop-3.mga4-331.20-2.mga4.nonfree nvidia-current-kernel-3.12.1-desktop-1.mga4-331.20-7.mga4.nonfree x11-driver-video-nvidia-current-331.20-7.mga4.nonfree
See Also: (none) => https://bugs.mageia.org/show_bug.cgi?id=11694
Blacklisting doesn't work for me, too. It seems for me that the rpm package fails to install the nvidia kernel moduel properly. If I install the driver via the Nvidia-installer, it works.
My bad... service_harddrake has path checking hardcoded so when I moved install path for built nvidia module to match current kernel layout, service_harddrake rewrites xorg.conf before display_driver_helper runs so it switches to the free driver Fixed in nvidia-current-331.20-9.mga4 and kmod-nvidia-current-331.20-11.mga4
Status: NEW => RESOLVEDResolution: (none) => FIXEDAssignee: bugsquad => tmbSource RPM: nvidia-current-kernel-3.12.0-desktop-3.mga4 => kernel-3.12.0-desktop-3.mga4
For me, the proprietary nvidia driver now works. I needed to choose 'no' to both the dkms and united memory options. Otherwise installing the module would fail. When I would install nvidia via urpmi, I always ended up with an error regarding 'fs/xfs/xfs_sb.c' - line 628 (or 627), claiming I needed to run xfs_repair. Also, still, nouveau only works for me with 3.12.0.
Thomas, confirmed that it finally now works with latest update! Nearly a month without sound, but all is good now.