Bug 10995 - scannerdrake does not allow the user to manually set overrides for sane
Summary: scannerdrake does not allow the user to manually set overrides for sane
Status: NEW
Alias: None
Product: Mageia
Classification: Unclassified
Component: RPM Packages (show other bugs)
Version: Cauldron
Hardware: All Linux
Priority: Normal enhancement
Target Milestone: ---
Assignee: Mageia tools maintainers
QA Contact:
URL:
Whiteboard:
Keywords:
Depends on:
Blocks:
 
Reported: 2013-08-14 07:47 CEST by Patrick Hibbs
Modified: 2016-10-15 23:28 CEST (History)
1 user (show)

See Also:
Source RPM: drakxtools
CVE:
Status comment:


Attachments

Description Patrick Hibbs 2013-08-14 07:47:17 CEST
Description of problem:

Some scanners need overrides set in sane's configuration for them to work properly.

(For example my ScanMagic 1200 UB Plus needs override "mustek-scanexpress-1200-ub-plus" otherwise xsane and friends will fail to connect to it. This is not set by mcc.)

Some scanners should be auto-detected, as mcc already attempts to detect the scanner. However considering that these scanners may use the same usb vender and product ids, it would be nice to have an option to manually set the overrides in mcc. (As it seems proper auto-detection of the device may not be possible.)

This would prevent a user complaining about a device not working after using mcc to configure it and it's firmware. (If needed.) 

As it is, a user may need to lookup the sane backend's documentation to figure out why it does not work, and alter the config files manually. Even if the scanner was auto-detected.


Version-Release number of selected component (if applicable):


How reproducible:
Get a scanner that needs an override in sane's config to use. (That mcc will net set an override for.)

Use mcc to configure the scanner.

Steps to Reproduce:
1.
2.
3.


Reproducible: 

Steps to Reproduce:
Comment 1 Thierry Vignaud 2013-12-21 04:26:13 CET
Wrong package

CC: (none) => thierry.vignaud
Summary: mcc does not allow the user to manually set overrides for sane (scanners) => scannerdrake does not allow the user to manually set overrides for sane
Source RPM: drakconf-12.38-1.mga3.src.rpm => drakxtools

Comment 2 David Walser 2015-03-03 00:05:30 CET
Sounds like this one needs some developer work to implement.  Someone interested will have to take it up then.  I assume this hasn't been addressed, so I'll correct the version assignment.

Version: 3 => Cauldron

Samuel Verschelde 2016-10-15 23:28:05 CEST

Assignee: bugsquad => mageiatools


Note You need to log in before you can comment on or make changes to this bug.