Bug 8011

Summary:	Brother DCP-195C - very difficult to be recognized
Product:	Mageia	Reporter:	Dimitrios Glentadakis <dglent>
Component:	RPM Packages	Assignee:	Mageia Bug Squad <bugsquad>
Status:	RESOLVED WORKSFORME	QA Contact:
Severity:	normal
Priority:	Normal
Version:	2
Target Milestone:	---
Hardware:	x86_64
OS:	Linux
Whiteboard:
Source RPM:		CVE:
Status comment:

Description Dimitrios Glentadakis 2012-11-07 11:55:23 CET

Some times and since 1 month almost always the printer is not recognized and i need to change more time the usb port to make it recognized

In dmesg i have this ouput:


[ 94.181616] usb 1-2: new full-speed USB device number 7 using ohci_hcd
[ 94.309283] usb 1-2: device descriptor read/64, error -62
[ 94.537679] usb 1-2: device descriptor read/64, error -62
[ 94.761115] usb 1-2: new full-speed USB device number 8 using ohci_hcd
[ 94.888764] usb 1-2: device descriptor read/64, error -62
[ 95.117182] usb 1-2: device descriptor read/64, error -62
[ 95.340592] usb 1-2: new full-speed USB device number 9 using ohci_hcd
[ 95.743551] usb 1-2: device not accepting address 9, error -62
[ 95.866244] usb 1-2: new full-speed USB device number 10 using ohci_hcd
[ 96.269177] usb 1-2: device not accepting address 10, error -62
[ 96.269209] hub 1-0:1.0: unable to enumerate USB device on port 2


I replaced my old printer for a similar output messages problem
https://qa.mandriva.com/show_bug.cgi?id=54655


There is something sensitive with Brother printers ?

Since the bug above in mandriva i have changed the PC too with a new one

I have these rpm installed:
dcp195clpr-1.1.3-1
dcp195ccupswrapper-1.1.3-1

Comment 1 claire robinson 2012-11-07 13:27:30 CET

I have a dcp-110c connected to an old ubuntu server, with the lpr and cupswrapper brother drivers. It has a scanner on top, old multifunction thing.

I find that it needs usblp kernel module loaded for the printer to work but that the scanner will only work when usblp is removed.

usblp was blacklisted in Mageia 2 as it can interfere with recent versions of cups, you can try to load it though using 'modprobe usblp' as root and if you find that solves the problem for you then remove the blacklist by deleting  /etc/modprobe.d/blacklist-cups-common.conf

Comment 2 Dimitrios Glentadakis 2012-11-07 18:00:09 CET

Unfortunately it did nt help.
Now i am not able to make it work , i cgange the usb port several times but the printer it is not be recognized

Comment 3 Dimitrios Glentadakis 2012-11-18 09:04:02 CET

I bought another printer (hp photosmart 5520)

Status: NEW => RESOLVED
Resolution: (none) => WORKSFORME