Bug 792

Summary:	lib64sane-hpaio1 should be installed by default by system-config-printer
Product:	Mageia	Reporter:	Yann Ciret <mageia>
Component:	RPM Packages	Assignee:	Mageia Bug Squad <bugsquad>
Status:	RESOLVED FIXED	QA Contact:
Severity:	normal
Priority:	Normal	CC:	cjw, stblack
Version:	Cauldron
Target Milestone:	---
Hardware:	x86_64
OS:	Linux
Whiteboard:
Source RPM:	hplip-3.11.1-1.mga1.src.rpm	CVE:
Status comment:

Description Yann Ciret 2011-04-12 21:40:28 CEST

Description of problem:

Hello an old mandriva problem (https://qa.mandriva.com/show_bug.cgi?id=46940) occurs on Mageia beta 1.
I need manually install the package lib64sane-hpaio1 to be able to use my network scanner (HP Photosmart C8180).


Version-Release number of selected component (if applicable):
$ rpm -qa |grep hpaio
lib64sane-hpaio1-3.11.1-1.mga1

How reproducible:


Steps to Reproduce:
1. Launch system-config-printer (then hplip packages are automatically installed) and configure the network printer.
2. Launch scanner configuration (launch sane installation). No scanner detect
3. Add network printer with HPlip tools. Printer is installed and the communication works as I can see printer supplies status.
4.

[yann@cauldron ~]$ hp-scan

HP Linux Imaging and Printing System (ver. 3.11.1)
Scan Utility ver. 2.2

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Using device: hpaio:/net/Photosmart_C8100_series?ip=192.168.17.240

warning: No destinations specified. Adding 'file' destination by default.
warning: File destination enabled with no output file specified.
Setting output format to PNG for greyscale mode.
warning: Defaulting to '/home/yann/hpscan001.png'.
error: Unable to locate device hpaio:/net/Photosmart_C8100_series?ip=192.168.17.240 using SANE backend hpaio:. Please check HPLIP installation.                 
[yann@cauldron ~]$ rpm -qa |grep hpaio
[yann@cauldron ~]$ su -
Mot de passe : 
[root@cauldron ~]# rpm -qa |grep hpaio
[root@cauldron ~]# urpmi lib64sane-hpaio1


    $MIRRORLIST: media/core/release/lib64sane-hpaio1-3.11.1-1.mga1.x86_64.rpm
installation de lib64sane-hpaio1-3.11.1-1.mga1.x86_64.rpm depuis /var/cache/urpmi/rpms
Préparation ...                  #############################################
      1/1: lib64sane-hpaio1      #############################################
[root@cauldron ~]# exit
déconnexion
[yann@cauldron ~]$ hp-scan

HP Linux Imaging and Printing System (ver. 3.11.1)
Scan Utility ver. 2.2

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Using device: hpaio:/net/Photosmart_C8100_series?ip=192.168.17.240

warning: No destinations specified. Adding 'file' destination by default.
warning: File destination enabled with no output file specified.
Setting output format to PNG for greyscale mode.
warning: Defaulting to '/home/yann/hpscan001.png'.
Using device hpaio:/net/Photosmart_C8100_series?ip=192.168.17.240
Opening connection to device...

Resolution: 300dpi
Mode: gray
Compression: JPEG
Scan area (mm):
  Top left (x,y): (0.000000mm, 0.000000mm)
  Bottom right (x,y): (215.899994mm, 304.799988mm)
  Width: 215.899994mm
  Height: 304.799988mm
Destination(s): file
Output file: /home/yann/hpscan001.png

Warming up...
 

Scanning...
Expecting to read 8.7 MB from scanner.
Reading data: [******************************************] 100%  8.7 MB     
Read 8.7 MB from scanner.
Closing device.

Outputting to destination 'file':
Saving to file /home/yann/hpscan001.png

Done.
[yann@cauldron ~]$


Reproducible: 

Steps to Reproduce:

Comment 1 Yann Ciret 2011-05-07 10:07:42 CEST

It would be nice if this bug can be resolved for mageia 1.

Comment 2 Christiaan Welvaart 2011-05-07 12:17:30 CEST

One problem you describe here is that hplip's hp-scan utility doesn't work
unless an additional package is installed. Since this bug is assigned to hplip
I fixed that problem: with hplip-3.11.3a-3, the lib(64)sane-hpaio1 package will
always be installed together with hplip itself. This will also fix the
system-config-printer issue, although there's likely still a real bug in there.

Status: NEW => RESOLVED
CC: (none) => cjw
Resolution: (none) => FIXED

Comment 3 Ahmad Samir 2011-05-25 22:44:46 CEST

*** Bug 888 has been marked as a duplicate of this bug. ***

CC: (none) => stblack