Bug 6685

Description of problem: The CD/DVD drive handling on the Panasonic S10 toughbook is broken. If in the bios I set the DVD to be off on bootup, I cannot turn it afterwards. The light comes on but Mangeia does not see it, and I cannot even open the drive using the dvd switch on the front of the computer, and Mageia does not recongnize that the drive has been switched on. If it is on on bootup, I cannot switch it off from within Mageia. 

Under Windows, the drive works,is recognized if it is switched on after bootup, and Windows switches it off after 3 min to conserve battery. (and comes on again if the switch is used.)

 


Version-Release number of selected component (if applicable):
??

How reproducible:
Always

What other information can I give you to get to the bottom of this problem?


lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation Device 0103 (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 6 Series/C200 Series Chipset Family Thermal Management Controller (rev 04)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
04:00.0 CardBus bridge: Ricoh Co Ltd Device e476 (rev 02)
0d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)
0d:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01)


Here are the dmesg entries when the dvd was on (ie the bios was set up to switch the dvd on)  on boot up. 

[  5.222312] ata2.00: ATAPI: MATSHITADVD-RAM UJ869AS, 1.01, max UDMA/33
[    5.226183] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    5.226199] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    5.228284] ata2.00: configured for UDMA/33


.... 

[   7.798835] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda 
tray
[    7.798840] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.798988] sr 1:0:0:0: Attached scsi CD-ROM sr0