Bug 5619

Sorry, didn't get around to update it yet, hopefully i'll find some time this weekend.

Status: NEW => ASSIGNED
CC: (none) => doktor5000

Appreciate!
Here in Brisbane, Australia it's a wet drizzly Sat morning, ideal for us working on the computer...

Can you test hplip-3.12.4-1.mga2 that is available in Core Updates testing

CC: (none) => tmb

Tested, mixed results.
1. the hplip 3.12.4 runs OK, but...

2. the functionality it provides (double-sided scanning with the hp8600 plus) does _not_ work, as xsane does not seem to have been updated.

When I downloaded the hplip 3.12.4 source onto Mageia1 x86_64, congfigured, compiled and installed, xsane shows one new config option.  Where as xsane 0.998 in M2RC gives the usual scanner choices of ADF or Flatbed, the same version of xsane in my Mageia1 now additionally shows a 'Duplex" option in the pulldown box.

Did the hplip install also do this?  (Did you build with the relevant sane packages?)

Without this option in xsane, no duplex scanning is possible it seems.

I haven't been through the hplip source to see if the xsane changes were part of this.

Appreciate your work on this.
Tony Blackwell

Hello,
the version 3.12.4 is also needed for an Officejet 6700 Premium.
http://www.mageialinux-online.org/forum/topic-12575+driver-pour-hp-officejet-6700-premium.php

CC: (none) => yves.brungard_mageia

Quite late for feedback. Seems we have to push hplip-3.12.4 as a post-release update.

Hi,

This bug was filed against cauldron, but we do not have cauldron at the moment.

Please report whether this bug is still valid for Mageia 2.

Thanks :)

Cheers,
marja

Keywords: (none) => NEEDINFO

The actual version is always the 3.12.2.

(In reply to comment #6)
> Quite late for feedback. Seems we have to push hplip-3.12.4 as a post-release
> update.

Yes, 3.12.4 is still only in updates_testing. Will take a look for it soon.

So as noone objected so far, handing this over to QA for validation:

There should be soon hplip-3.12.4-1.mga2 in core/updates_testing to validate


Suggested advisory:
-------------------
This update addresses the folloving issues:

  o Print/Fax queues can now be analyzed by running "hp-diagnose-queues"
  o fixes some issues and duplex scanning support with newer AIO devices
  o fixes Wireless configuration using hp-wificonfig command for
    HP Deskjet 3000 J310 series and HP Deskjet 3050 J610 series
  o fixes the blurry printing issue on HP LaserJet CP1025 and CP1025nw

Full changelog is available upstream:
http://hplipopensource.com/hplip-web/release_notes.html
Also note there were quite some issues fixed upstream.


-------------------------------------------------------
Steps to reproduce:

- install/update to update candidate
- when you have a HP printer, check that all functions still work
and there are no regressions

Hardware: x86_64 => All
Version: Cauldron => 2
Assignee: doktor5000 => qa-bugs
Source RPM: hplip 3.12.2 => (none)

Will test it tonight

CC: (none) => ennael1

As best I can work out the packages are..

hplip
hplip-doc
hplip-gui
hplip-hpijs
hplip-hpijs-ppds
hplip-model-data

lib(64)hpip0
lib(64)hpip0-devel
lib(64)sane-hpaio1

Thankyou for testing.

Tested printing on hp 2600n color printer in monochrome mode.  All seems to be working fine.  No problems to report.  Programs tested were the following.

hplip
hplip-doc
hplip-gui
hplip-hpijs
hplip-hpijs-ppds
hplip-model-data

CC: (none) => linuxguy101
Hardware: All => x86_64
Target Milestone: --- => Mageia 2
QA Contact: (none) => linuxguy101

tested x86_64 version

HP Color Laserjet cp2025n on x86_64

All seems to be working OK here.

Can't test duplexer as don't have one.

CC: (none) => richardwest

HP Photosmart Premium c309g-m on x86_64 tested:
- print a photo (OK)
- scan image with gimp (OK)
- hpdevice manager status: give low ink level that 
  for some reasons was not shown before(OK)

CC: (none) => anaselli

Tested on an i586 system:

Deskjet 5650 with duplexer works Ok, except for duplexer bug that seems unique to my system, where on documents with an odd number of pages the last page is not rejected by the duplexer. Page can be ejected manually by use of the power switch. No one seems to be able to duplicate this problem, which I have had since Mandriva 2010.1, so I have learned to just live with it.

Scanner on an Officejet 6110 working perfectly.

CC: (none) => andrewsfarm

With both architectures tested now, I'll go ahead and validate the update.

Thanks for helping with the testing.

Could someone from the sysadmin team push the srpm
hplip-3.12.4-1.mga2.src.rpm
from Mageia 2 Core Updates Testing to Core Updates.

Advisory: This hplip update addresses the folloving issues:

  o Print/Fax queues can now be analyzed by running "hp-diagnose-queues"
  o fixes some issues and duplex scanning support with newer AIO devices
  o fixes Wireless configuration using hp-wificonfig command for
    HP Deskjet 3000 J310 series and HP Deskjet 3050 J610 series
  o fixes the blurry printing issue on HP LaserJet CP1025 and CP1025nw

Full changelog is available upstream:
http://hplipopensource.com/hplip-web/release_notes.html
Also note there were several issues fixed upstream.

https://bugs.mageia.org/show_bug.cgi?id=5619#c12

Keywords: (none) => validated_update
CC: (none) => davidwhodgins, sysadmin-bugs
Whiteboard: (none) => MGA2-32-OK, MGA2-64-OK

Update pushed:
https://wiki.mageia.org/en/Support/Advisories/MGAA-2012-0121

Status: ASSIGNED => RESOLVED
Resolution: (none) => FIXED