| Summary: | unable to connect to a wlan asking id and pwd | ||
|---|---|---|---|
| Product: | Mageia | Reporter: | episteme promeneur <epistemepromeneur> |
| Component: | RPM Packages | Assignee: | Mageia Bug Squad <bugsquad> |
| Status: | RESOLVED WONTFIX | QA Contact: | |
| Severity: | normal | ||
| Priority: | Normal | CC: | davidwhodgins, mageia, marja11 |
| Version: | 1 | ||
| Target Milestone: | --- | ||
| Hardware: | i586 | ||
| OS: | Linux | ||
| Whiteboard: | |||
| Source RPM: | drakx-net | CVE: | |
| Status comment: | |||
|
Description
episteme promeneur
2012-02-01 15:23:10 CET
Where it's work without issue But you need to connect to the ssid before opening the browser. Does it work with other hotspot/ wlan ? forget the part "with mageia, launching an internet browser does not launch the network connection", it's not the pb step to reproduce : i launch the wifi connection to an open wlan (no secured protocol, just asking an id and passwd) then connection failed addendum : the power of the hotspot is 100 % other experiment : i launch a wifi connection to a secured (wep/wpa) wlan then it succeeds Does it work with other hotspot ? i have a pc not a laptop. each customer of FREE isp has an adsl box to connect to internet each box is a wifi hotpsot connecting to the wifi hotpsot of my neighbor is a backup solution if my adsl connection failed and remember : with my smartphone it works, i can connect to the hotspot i found an open hotspot from another isp in my building then no pb connection succeeds. i can have its authoring template with firefox the difference is with "FREE" isp when dhclient send a dhcpdiscover request there is no answer then "no dhcpoffers received" it seems the dhcp server is slow to answer to the request. where to put a delay in draknet or in a file ? if i use dhcpd instead of dhclient there is an improvement i have this : inet adr:169.254.243.178 Bcast:169.254.255.255 Masque:255.255.0.0 but draknet says "connection fails" with firefox i can't get the authoring template it is strange that dhcpd get an ip address and draknet says connection succeeds but the net applet says connection fails i tried same experiments with ndiswrapper and the windows xp driver then i get exactly the same results with dhcpd i get this
wlan0 Link encap:Ethernet HWaddr 68:7F:74:FB:D1:DB
inet adr:169.254.15.169 Bcast:169.254.255.255 Masque:255.255.0.0
adr inet6: fe80::6a7f:74ff:fefb:d1db/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:356 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:2018 (1.9 KiB) TX bytes:72112 (70.4 KiB)
Interruption:18 Mémoire:dbff0000-dc000000
and this
wlan0 IEEE 802.11g ESSID:"FreeWifi" Nickname:"localhost.localdomain"
Mode:Managed Frequency:2.462 GHz Access Point: DA:6E:D6:71:B5:6A
Bit Rate=270 Mb/s Tx-Power:20 dBm Sensitivity=0/3
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:95/100 Signal level:-35 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
i also found this in the syslog
ifplugd(wlan0)[5786]: client: NETLINK: Packet too small or truncated! 60!=16!=1008
@ blino do you have an idea? CC:
(none) =>
mageia, marja11 If you take a look at the output of "whois 169.254.15.169", part of it says ... Comment: It is allocated for communication between hosts Comment: on a single link. Hosts obtain these addresses Comment: by auto-configuration, such as when a DHCP Comment: server cannot be found. So the dhcp server is still likely not responding. Does the adsl box have a port for a wired connection? If it does, I think the most useful output would be a wireshark capture of the smartphone connecting, and a capture of the mageia system attempting to connect. Don't forget to edit out any passwords before attaching such a capture. CC:
(none) =>
davidwhodgins > Does the adsl box have a port for a wired connection? If it does,
>I think the most useful output would be a wireshark capture of the
> smartphone connecting, and a capture of the mageia system attempting
> to connect. Don't forget to edit out any passwords before attaching
> such a capture.
yes there is a wired connexion
but for this part it is too technie for me
This message is a reminder that Mageia 1 is nearing its end of life. In approximately 25 days from now, Mageia will stop maintaining and issuing updates for Mageia 1. At that time this bug will be closed as WONTFIX (EOL) if it remains open with a Mageia 'version' of '1'. Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Mageia version prior to Mageia 1's end of life. Bug Reporter: Thank you for reporting this issue and we are sorry that we may not be able to fix it before Mageia 1 is end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Mageia, you are encouraged to click on "Version" and change it against that version of Mageia. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Mageia release includes newer upstream software that fixes bugs or makes them obsolete. -- Mageia Bugsquad Mageia 1 changed to end-of-life (EOL) status on ''1st December''. Mageia 1 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of Mageia please feel free to click on "Version" change it against that version of Mageia and reopen this bug. Thank you for reporting this bug and we are sorry it could not be fixed. -- Mageia Bugsquad Status:
NEW =>
RESOLVED |