Bug 4019

Summary:	Cannot resume after suspend MSI u110
Product:	Mageia	Reporter:	Dimitrios Glentadakis <dglent>
Component:	RPM Packages	Assignee:	Mageia Bug Squad <bugsquad>
Status:	RESOLVED OLD	QA Contact:
Severity:	normal
Priority:	Normal	CC:	mageia, mailinglistsduraph, marja11, pterjan, tmb
Version:	3
Target Milestone:	---
Hardware:	i586
OS:	Linux
Whiteboard:
Source RPM:	pm-utils	CVE:
Status comment:

Description Dimitrios Glentadakis 2012-01-04 18:54:25 CET

Continue from bug https://bugs.mageia.org/show_bug.cgi?id=1811 i cannot resume after suspend (nothing happens)

I tried with : pm-{suspend,hibernate} the same result
I try with : echo mem|disk > /sys/power/state and i have the message:


[root@localhost xenia]# echo mem|disk > /sys/power/state
bash: disk : commande introuvable




[root@localhost xenia]# lspcidrake
rt2860sta       : RaLink|RT2860 [NETWORK_OTHER]
sata_sil24      : Silicon Image, Inc.|SiI 3531 [SATALink/SATARaid] Serial ATA Controller [STORAGE_OTHER] (rev: 01)
pata_sch        : Intel Corporation|System Controller Hub (SCH Poulsbo) IDE Controller [STORAGE_IDE] (rev: 07)
lpc_sch         : Intel Corporation|System Controller Hub (SCH Poulsbo) LPC Bridge [BRIDGE_ISA] (rev: 07)
ehci_hcd        : Intel Corporation|System Controller Hub (SCH Poulsbo) USB EHCI #1 [SERIAL_USB] (rev: 07)
uhci_hcd        : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #3 [SERIAL_USB] (rev: 07)
uhci_hcd        : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #2 [SERIAL_USB] (rev: 07)
uhci_hcd        : Intel Corporation|System Controller Hub (SCH Poulsbo) USB UHCI #1 [SERIAL_USB] (rev: 07)
shpchp          : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 2 [BRIDGE_PCI] (rev: 07)
shpchp          : Intel Corporation|System Controller Hub (SCH Poulsbo) PCI Express Port 1 [BRIDGE_PCI] (rev: 07)
snd_hda_intel   : Intel Corporation|System Controller Hub (SCH Poulsbo) HD Audio Controller (rev: 07)
Card:Intel Poulsbo US15W (GMA500): Intel Corporation|System Controller Hub (SCH Poulsbo) Graphics Controller [DISPLAY_VGA] (rev: 07)
unknown         : Intel Corporation|System Controller Hub (SCH Poulsbo) [BRIDGE_HOST] (rev: 07)
hub             : Linux 2.6.38.8-netbook-8.mga ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub]
hub             : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
hub             : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
hub             : Linux 2.6.38.8-netbook-8.mga uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub]
[root@localhost xenia]#


[root@localhost xenia]# uname -a
Linux localhost.localdomain 2.6.38.8-netbook-8.mga #1 SMP Fri Nov 4 00:42:04 UTC 2011 i686 i686 i386 GNU/Linux

Comment 1 Marja Van Waes 2012-01-04 21:03:31 CET

cc'ing two pm-utils committers

CC: (none) => mageia, marja11, pterjan
Source RPM: (none) => pm-utils

Comment 2 Dimitrios Glentadakis 2012-01-08 13:58:23 CET

Actually the problem is that it does nt suspend at all. It stays to a non wake-up state

I tried to suspend after have launched this command:
echo LID > /proc/acpi/wakeup

which i found here:
https://bugzilla.kernel.org/show_bug.cgi?id=16512

then, i have the suspend because now i have the light with the half moon flashing. But after i cannot wake it up and after pressed on the power button once , to wake it up, it remains in the statement in my first message.

Comment 3 Marja Van Waes 2012-01-08 18:22:07 CET

@ Dimitrios

Did you try without X running, as suggested here

https://wiki.mageia.org/en/Triage_guide#Suspend.2FHibernate_issues



@ tmb

Could this be a kernel issue?

Comment 4 Marja Van Waes 2012-01-08 18:22:51 CET

(In reply to comment #3)

> @ tmb
> 
> Could this be a kernel issue?

and now really cc'ing

CC: (none) => tmb

Comment 5 Marja Van Waes 2012-04-12 08:36:40 CEST

@ Dimitrios

Do you still have the resume issue? If so, did you try without X as suggested in comment 3?

Keywords: (none) => NEEDINFO

Comment 6 Dimitrios Glentadakis 2012-04-13 21:02:27 CEST

Yes, there is always the problem with suspend
I can go in a "suspend" state but it does nt comes back
I tried out of X , same result
I tried the output of the command:

[root@localhost xenia]# echo mem|disc > /sys/power/state
bash: disc : command not found

see first comment : 
https://bugs.mageia.org/show_bug.cgi?id=4019#c0

Raphaël Vinet 2012-04-15 12:45:07 CEST

CC: (none) => mailinglistsduraph

Comment 7 Marja Van Waes 2012-05-02 09:38:27 CEST

laptop-mode-tools isn't installed, too, is it?

Comment 8 Dimitrios Glentadakis 2012-05-03 17:25:34 CEST

No, it is not installed

Marja Van Waes 2012-05-18 21:21:30 CEST

Keywords: NEEDINFO => (none)

Comment 9 Dimitrios Glentadakis 2012-09-08 11:13:06 CEST

I still have the problem in Mageia 2

Version: 1 => 2

Comment 10 Marja Van Waes 2012-09-08 13:52:33 CEST

(In reply to comment #9)
> I still have the problem in Mageia 2

If you have the problem in cauldron too, then please change version to cauldron and put MGA2TOO on the whiteboard.

If you know it didn't get fixed in Mageia 1, then please put MGA1TOO on the whiteboard (too)

Comment 11 egc 2012-09-09 14:05:45 CEST

I have the same problem with an
gma500_gfx      : Intel Corporation|Atom Processor D2xxx Integrated Graphics Controller [DISPLAY_VGA] (rev: 09)
on a ASUS EccPC R11CX running kernel-desktop586-3.3.8-2.mga2â or kernel-netbook-3.3.8-2.mga2

pm-hibernate works fine though.

CC: (none) => egc

Dimitrios Glentadakis 2013-06-09 14:53:49 CEST

Version: 2 => 3

Comment 12 Marja Van Waes 2015-03-31 16:05:13 CEST

Mageia 3 changed to end-of-life (EOL) status 4 months ago.
http://blog.mageia.org/en/2014/11/26/lets-say-goodbye-to-mageia-3/ 

Mageia 3 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug.

If you can reproduce this bug against a currently maintained version of Mageia
please feel free to click on "Version" change it against that version of Mageia
and reopen this bug.

Thank you for reporting this bug and we are sorry it could not be fixed.

--
The Mageia Bugsquad

Status: NEW => RESOLVED
Resolution: (none) => OLD

egc 2015-04-02 00:09:12 CEST

CC: egc => (none)