| Summary: | CDRom not working because device node isnât created | ||
|---|---|---|---|
| Product: | Mageia | Reporter: | Rémy CLOUARD (shikamaru) <shikamaru> |
| Component: | RPM Packages | Assignee: | Mageia Bug Squad <bugsquad> |
| Status: | RESOLVED OLD | QA Contact: | |
| Severity: | major | ||
| Priority: | Normal | CC: | anssi.hannula, marja11, pterjan, thierry.vignaud, tmb |
| Version: | Cauldron | Keywords: | NEEDINFO |
| Target Milestone: | --- | ||
| Hardware: | x86_64 | ||
| OS: | Linux | ||
| Whiteboard: | |||
| Source RPM: | module-init-tools | CVE: | |
| Status comment: | |||
| Attachments: |
dmesg output
output of lspcidrake -v syslog after inserting a cd with debug messages modprobe.conf |
||
modprobe pata_amd solves the problem here, but the question is why does not it get automatically loaded ? Created attachment 106 [details]
dmesg output
line 726 is when I modprobed pata_amd
Created attachment 107 [details]
output of lspcidrake -v
Thierry Vignaud
2011-03-13 14:27:03 CET
CC:
(none) =>
thierry.vignaud
Thierry Vignaud
2011-03-15 09:52:43 CET
Assignee:
bugsquad =>
dmorganec
Rémy CLOUARD (shikamaru)
2011-03-15 19:15:23 CET
Status:
NEW =>
ASSIGNED
D Morgan
2011-03-15 19:38:25 CET
Status:
ASSIGNED =>
NEW can you test with new udev ? ( 166 ) as root can you do : udevadm control --log-priority=debug and then attach the logs from /var/log/syslog from udev when inserting a CD thanks. Created attachment 167 [details]
syslog after inserting a cd with debug messages
You will find here the logs
Hereâs what I did
- issue the requested command
- try inserting a cd (nothing showed up)
- eject
- modprobe pata_amd
- inserting the cd again
Please attach /etc/modprobe.conf . Keywords:
(none) =>
NEEDINFO I think the RPM Package should be whatever creates /etc/modprobe.conf at install time (unfortunately I don't know which drakx* tool does that). Created attachment 286 [details]
modprobe.conf
you will find here the requested /etc/modprobe.conf
Add: install scsi_hostadapter /sbin/modprobe pata_amd; /bin/true to /etc/modprobe.conf then rebuild the intrid. (c.f. http://forum.mandriva.com/en/viewtopic.php?f=10&t=126675) CC:
(none) =>
anssi.hannula, pterjan Or easier, stick pata_amd in /etc/modprobe.preload c.f. https://bugs.mageia.org/show_bug.cgi?id=885#c8 CC:
(none) =>
tmb
Thomas Backlund
2011-04-25 09:33:28 CEST
Attachment 167 mime type:
application/octet-stream =>
text/plain No reaction after comment 10 and 11, so closing Status:
NEW =>
RESOLVED |
Description of problem: Iâm unable to use my dvdrom driver (PHILIPS PBDV1640P) because the device does not seem to be detected and thus does not get /dev/sr0 created. Here is the output of lshw with debian: *-ide:0 description: IDE interface product: MCP51 IDE vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 logical name: scsi2 version: a1 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3 resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16) *-cdrom description: DVD writer product: PBDV1640P vendor: PHILIPS physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: B3.4 capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=ready *-medium physical id: 0 logical name: /dev/cdrom Version-Release number of selected component (if applicable): 2.6.37-desktop-3.mga1 How reproducible: Always Steps to Reproduce: 1. boot mageia1 2. launch k3b 3. see it tell there is no cdrom found Reproducible: Steps to Reproduce: