Bug 30492

Description of problem:
think something is broken udev OR drakx-tools 
rules to compain 60-block.rules

Steps to Reproduce:

1. plug an usb stick then unmount it
2. udevadm monitor
3. bootloader-config --action update-splash
oopps... the usb stick gets mounted again as reinserted
now watch the monitor window
KERNEL[6001.482559] add      /module/dm_zero (module)
UDEV  [6001.485923] add      /module/dm_zero (module)
KERNEL[6001.591410] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda (block)
KERNEL[6001.591488] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda1 (block)
KERNEL[6001.591707] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
KERNEL[6001.591762] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda5 (block)
KERNEL[6001.631926] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
KERNEL[6001.687269] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
UDEV  [6001.846930] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda (block)
UDEV  [6001.857706] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda1 (block)
UDEV  [6001.905496] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
UDEV  [6001.955752] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
UDEV  [6001.980227] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
UDEV  [6002.019333] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda5 (block)
KERNEL[6002.368850] remove   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
KERNEL[6002.401878] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb (block)
KERNEL[6002.402190] add      /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
UDEV  [6002.409181] remove   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
UDEV  [6002.743501] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb (block)
UDEV  [6003.540861] add      /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
KERNEL[6008.773389] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
UDEV  [6009.188161] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)

hmmm it seems that at least  60-block.rules do some weird things
putting sd*[0-9] in last line on that rule - the usb stick doesn't get mounted after issuing the bootloader-config. However the weird outputs still persists in  monitor window

KERNEL[6936.291954] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
UDEV  [6936.433558] change   /devices/pci0000:00/0000:00:0d.0/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 (block)
KERNEL[6936.909664] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)
UDEV  [6937.634755] change   /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/host3/target3:0:0/3:0:0:0/block/sdb/sdb1 (block)

if i test the rule putting sd*[!0-9] then the system acts like sd* - the usb stick gets mounted after issuing bootloader-config command as above

Something is not right here....