| Summary: | Kernel halt (desktop freeze) during access to parallel port printer on AMD SB785 mainboard | ||
|---|---|---|---|
| Product: | Mageia | Reporter: | Jürgen Preuà <preugen> |
| Component: | RPM Packages | Assignee: | Thomas Backlund <tmb> |
| Status: | RESOLVED OLD | QA Contact: | |
| Severity: | major | ||
| Priority: | Normal | CC: | doktor5000, marja11, tmb |
| Version: | 2 | ||
| Target Milestone: | --- | ||
| Hardware: | All | ||
| OS: | Linux | ||
| Whiteboard: | MGA1TOO | ||
| Source RPM: | kernel 3.3.6-2.mga2.src.rpm | CVE: | |
| Status comment: | |||
|
Description
Jürgen PreuÃ
2011-07-03 20:47:06 CEST
Thomas, if you have an idea. (Sorry it was probably a missing one bug :/ ) CC:
(none) =>
tmb @ Jürgen ouch, sorry, we are very short on triagers and miss things :( And now it's five months later, and the problem may have gotten solved through an update, anyway. Did it get solved? In case the bug is still there, I'll put our printing magician in the cc of this report. CC:
(none) =>
doktor5000, marja11 Reporter, could you please reply to the previous question? If you won't reply within two weeks from now, I will have to close this bug as OLD. Thank you. Keywords:
(none) =>
NEEDINFO (In reply to comment #3) > Reporter, could you please reply to the previous question? If you won't reply > within two weeks from now, I will have to close this bug as OLD. Thank you. Here I am. Sorry for long delay. Errors are not resolved and continue. Last tested with kernels 2.6.38.8-desktop-10.mga and 3.1.6-desktop-nrj.69mib. Entire distribution is actually patched. Thank you for your efforts. with regards, Juergen. (In reply to comment #4) > and 3.1.6-desktop-nrj.69mib. > Entire distribution is actually patched. What do you mean by that? Also you can't expect us to do some support for a 3rd party kernel, or why do you mention an MIB kernel here? If you installed many 3rd party packages, then please complain to the 3rd party packages for bugfixes, we can only support official mageia packages. (In reply to comment #5) > (In reply to comment #4) > > and 3.1.6-desktop-nrj.69mib. > > Entire distribution is actually patched. > > What do you mean by that? Also you can't expect us to do some support for a 3rd > party kernel, or why do you mention an MIB kernel here? If you installed many > 3rd party packages, then please complain to the 3rd party packages for > bugfixes, we can only support official mageia packages. Hallo Florian, sorry for your inconvenience. I wanted to say, that I'm regularly/daily check for patches and deploy them. Because I'm an long time consumer of Mandriva, I also tried to resolve my printing and mousing problems with actual kernels borrowed by siblings of MIB. But MIB kernels inserted in Mageia1 and a separate complete installation of MDV 2011 on this mainboard are showing the same blocking behavior in case of output to parallel device. For completeness of information I'll send you the list of installed MIB packages. You shouldn't fix them. [root@Max ~]# rpm -qa|grep mib kernel-nrj-desktop-devel-latest-3.1.6-nrj.69mib2010.2 dkms-fglrx-8.881-69.1mib2010.2 fglrx-control-center-8.881-69.1mib2010.2 kernel-nrj-desktop-devel-3.1.6-nrj.69mib-1-1mib2010.2 kernel-firmware-20110314-69mib2010.2 x11-driver-video-fglrx-8.881-69.1mib2010.2 kernel-firmware-extra-20110517-69mib2010.2 kernel-nrj-desktop-3.1.6-nrj.69mib-1-1mib2010.2 kernel-nrj-desktop-latest-3.1.6-nrj.69mib2010.2 If there is anything to do for Your support, I'm glad to hear of it. Thanks, Juergen @ tmb assigning to you. The last Mageia kernel the reporter tried with is the actual one in Mageia 1 Keywords:
NEEDINFO =>
(none) 3-monthly ping @ Jürgen If this bug is still valid, is it valid for Mageia 2, too? Hi Marja, thank you for remembering this open tasks. In this case, there are actually no good news. Again testet with MGA2 (release kernel 3.3.6-2, all updates applied). The system freezes immediately. Tested on console with "cat /etc/hosts > /dev/lp0". The printer initialized (positioned paper) and stopped before printing first char. Is there any advice to produce an dump or core file? Good evening, with regards, Jürgen (In reply to comment #9) > > In this case, there are actually no good news. Again testet with MGA2 (release > kernel 3.3.6-2, all updates applied). The system freezes immediately. > > Tested on console with "cat /etc/hosts > /dev/lp0". The printer initialized > (positioned paper) and stopped before printing first char. > > Is there any advice to produce an dump or core file? > @ tmb (or @ anybody else who knows) Can you please answer that question? Version:
1 =>
2 Please look at the bottom of this mail to see whether you're the assignee of this bug, if you don't already know whether you are. If you're the assignee: We'd like to know for sure whether this bug was assigned correctly. Please change status to ASSIGNED if it is, or put OK on the whiteboard instead. If you don't have a clue and don't see a way to find out, then please put NEEDHELP on the whiteboard. Please assign back to Bug Squad or to the correct person to solve this bug if we were wrong to assign it to you, and explain why. Thanks :) **************************** @ the reporter and persons in the cc of this bug: If you have any new information that wasn't given before (like this bug being valid for another version of Mageia, too, or it being solved) please tell us. @ the reporter of this bug If you didn't reply yet to a request for more information, please do so within two weeks from now. Thanks all :-D This message is a reminder that Mageia 2 is nearing its end of life. Approximately one month from now Mageia will stop maintaining and issuing updates for Mageia 2. At that time this bug will be closed as WONTFIX (EOL) if it remains open with a Mageia 'version' of '2'. Package Maintainer: If you wish for this bug to remain open because you plan to fix it in a currently maintained version, simply change the 'version' to a later Mageia version prior to Mageia 2's end of life. Bug Reporter: Thank you for reporting this issue and we are sorry that we may not be able to fix it before Mageia 2 is end of life. If you would still like to see this bug fixed and are able to reproduce it against a later version of Mageia, you are encouraged to click on "Version" and change it against that version of Mageia. Although we aim to fix as many bugs as possible during every release's lifetime, sometimes those efforts are overtaken by events. Often a more recent Mageia release includes newer upstream software that fixes bugs or makes them obsolete. -- The Mageia Bugsquad Mageia 2 changed to end-of-life (EOL) status on ''22 November''. Mageia 2 is no longer maintained, which means that it will not receive any further security or bug fix updates. As a result we are closing this bug. If you can reproduce this bug against a currently maintained version of Mageia please feel free to click on "Version" change it against that version of Mageia and reopen this bug. Thank you for reporting this bug and we are sorry it could not be fixed. -- The Mageia Bugsquad Status:
NEW =>
RESOLVED |