Bug 17447

Could be a buggy usb hub.

Try the same with the printer connected directly to the laptop

CC: (none) => tmb

OK, I just tried: same problem
332156.251451] usb 1-2.3: USB disconnect, device number 70
[332156.251455] usb 1-2.3.1: USB disconnect, device number 71
[332182.033032] usb 1-3: new high-speed USB device number 73 using xhci_hcd
[332182.197264] usb 1-3: New USB device found, idVendor=0424, idProduct=2502
[332182.197268] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[332182.197762] hub 1-3:1.0: USB hub found
[332182.197784] hub 1-3:1.0: 2 ports detected
[332182.471338] usb 1-3.1: new full-speed USB device number 74 using xhci_hcd
[332182.544383] usb 1-3.1: device descriptor read/64, error -32
[332182.718499] usb 1-3.1: device descriptor read/64, error -32
[332182.892559] usb 1-3.1: new full-speed USB device number 75 using xhci_hcd
[332182.965680] usb 1-3.1: device descriptor read/64, error -32
[332183.139760] usb 1-3.1: device descriptor read/64, error -32
[332183.313835] usb 1-3.1: new full-speed USB device number 76 using xhci_hcd
[332183.313925] usb 1-3.1: Device not responding to setup address.
[332183.515191] usb 1-3.1: Device not responding to setup address.
[332183.716134] usb 1-3.1: device not accepting address 76, error -71
[332183.789185] usb 1-3.1: new full-speed USB device number 77 using xhci_hcd
[332183.789364] usb 1-3.1: Device not responding to setup address.
[332183.990340] usb 1-3.1: Device not responding to setup address.
[332184.191388] usb 1-3.1: device not accepting address 77, error -71
[332184.191424] usb 1-3-port1: unable to enumerate USB device

Adding packagers in CC to help triaging this printer driver or hardware issue.

CC: (none) => doktor5000, pkg-bugs
Whiteboard: (none) => NEEDHELP

Seems more like hardware issue, as connecting the powered printer via hub seems to work. 

@papoteur: Can you try to attach it directly to the laptop on another port, preferrably not via usb 3.0 port ?

I tried on another computer and with a direct connection. For what I know, there is no USB3 here. I was the case with the laptop (previously).
When switching on, same error:
[  152.275031] usb 1-8: new high-speed USB device number 4 using ehci-pci
[  152.425464] usb 1-8: New USB device found, idVendor=0424, idProduct=2502
[  152.425468] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  152.425764] hub 1-8:1.0: USB hub found
[  152.425805] hub 1-8:1.0: 2 ports detected
[  152.705304] usb 1-8.1: new full-speed USB device number 5 using ehci-pci
[  152.785334] usb 1-8.1: device descriptor read/64, error -32
[  152.975384] usb 1-8.1: device descriptor read/64, error -32
[  153.165449] usb 1-8.1: new full-speed USB device number 6 using ehci-pci
[  153.245478] usb 1-8.1: device descriptor read/64, error -32
[  153.435691] usb 1-8.1: device descriptor read/64, error -32
[  153.625757] usb 1-8.1: new full-speed USB device number 7 using ehci-pci
[  154.045790] usb 1-8.1: device not accepting address 7, error -32
[  154.125933] usb 1-8.1: new full-speed USB device number 8 using ehci-pci
[  154.546034] usb 1-8.1: device not accepting address 8, error -32
[  154.546206] usb 1-8-port1: unable to enumerate USB device

Then unpluging
[  466.811588] usb 1-8: USB disconnect, device number 4

Then plugging again
[  485.609738] usb 1-8: new high-speed USB device number 9 using ehci-pci
[  485.760150] usb 1-8: New USB device found, idVendor=0424, idProduct=2502
[  485.760154] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  485.760451] hub 1-8:1.0: USB hub found
[  485.760495] hub 1-8:1.0: 2 ports detected
[  486.039976] usb 1-8.1: new high-speed USB device number 10 using ehci-pci
[  486.150911] usb 1-8.1: New USB device found, idVendor=03f0, idProduct=7317
[  486.150915] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  486.150917] usb 1-8.1: Product: HP LaserJet P3005
[  486.150918] usb 1-8.1: Manufacturer: Hewlett-Packard
[  486.150920] usb 1-8.1: SerialNumber: CNK1T82846
[  486.157590] WARNING! power/level is deprecated; use power/control instead
[  486.202163] usblp 1-8.1:1.0: usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x03F0 pid 0x7317
[  486.202188] usbcore: registered new interface driver usblp


Thus, it seems related to hardware, but I don't know if the hardware is failing, has particular behaviour which is not managed by Linux tools or is buggy.
I can't compare with behaviour under Windows, I never used it except with net interface.

On the 25th of July, Phillipem uploaded the following packages to 
Cauldron's core/updates_testing:

    system-config-printer-1.5.7-5.mga6.i586
    system-config-printer-applet-1.5.7-5.mga6.i586
    system-config-printer-udev-1.5.7-5.mga6.i586

    system-config-printer-libs-1.5.7-5.mga6.noarch

    system-config-printer-1.5.7-5.mga6.x86_64
    system-config-printer-applet-1.5.7-5.mga6.x86_64
    system-config-printer-udev-1.5.7-5.mga6.x86_64


@ Anyone reading this:

* If this bug is valid for you in cauldron, then please test whether updating your system-config-printer packages to version 1.5.7-5.mga6 fixes the problem and report back in this bug report.

* If you do not have this bug in cauldron, but you do run cauldron, then please update those packages, too, and report in bug 18367 whether they work as expected.

CC: (none) => makowski.mageia, marja11

Is this bug report still valid?

Keywords: (none) => NEEDINFO

Hello,
Perhaps, but for now, I use this printer on Lan, thus, I don't hit this bug anymore.

Thus I close.

Status: NEW => RESOLVED
Resolution: (none) => OLD