Attachment 8851 Details for Bug 20087 – With a lost connection

With a lost connection

report2.txt (text/plain), 90.76 KB, created by papoteur on 2017-01-13 13:43:54 CET

(hide)

Description:

Filename:

MIME Type:

Creator: papoteur

Created: 2017-01-13 13:43:54 CET

Size: 90.76 KB

patch

obsolete

>ip route
>default via 192.168.1.254 dev wlp2s0  metric 35 
>169.254.0.0/16 dev wlp2s0  scope link  metric 35 
>192.168.1.0/24 dev wlp2s0  proto kernel  scope link  src 192.168.1.67  metric 35 
>================
>iwconfig
>wlp2s0    IEEE 802.11abgn  ESSID:"SFR_0DD8"  
>          Mode:Managed  Frequency:2.412 GHz  Access Point: 30:7E:CB:89:0D:DC   
>          Bit Rate=11 Mb/s   Tx-Power=20 dBm   
>          Retry short limit:7   RTS thr:off   Fragment thr:off
>          Encryption key:off
>          Power Management:off
>          Link Quality=69/70  Signal level=-41 dBm  
>          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>          Tx excessive retries:0  Invalid misc:1502   Missed beacon:0
>
>================
>iwlist scan
>wlp2s0    Scan completed :
>          Cell 01 - Address: 30:7E:CB:89:0D:DC
>                    Channel:1
>                    Frequency:2.412 GHz (Channel 1)
>                    Quality=60/70  Signal level=-50 dBm  
>                    Encryption key:on
>                    ESSID:"SFR_0DD8"
>                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
>                              24 Mb/s; 36 Mb/s; 54 Mb/s
>                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
>                    Mode:Master
>                    Extra:tsf=000000058b80f46b
>                    Extra: Last beacon: 62ms ago
>                    IE: Unknown: 00085346525F30444438
>                    IE: Unknown: 010882848B962430486C
>                    IE: Unknown: 030101
>                    IE: Unknown: 2A0100
>                    IE: Unknown: 2F0100
>                    IE: Unknown: 32040C121860
>                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
>                    IE: Unknown: 3D1601000400000000000000000000000000000000000000
>                    IE: Unknown: DD840050F204104A0001101044000102103B00010310470010000000000000000000000000000000001021000A4E42362D5345522D72321023000A4E42362D5345522D72321024000A4E42362D5345522D72321042000C3330374543423839304444381054000800060050F2040001101100085346525F30444438100800020084103C000101
>                    IE: Unknown: DD090010180201F02C0000
>                    IE: WPA Version 1
>                        Group Cipher : TKIP
>                        Pairwise Ciphers (2) : CCMP TKIP
>                        Authentication Suites (1) : PSK
>                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
>          Cell 02 - Address: B2:7E:CB:89:0D:DD
>                    Channel:1
>                    Frequency:2.412 GHz (Channel 1)
>                    Quality=60/70  Signal level=-50 dBm  
>                    Encryption key:off
>                    ESSID:"SFR WiFi FON"
>                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
>                              24 Mb/s; 36 Mb/s; 54 Mb/s
>                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
>                    Mode:Master
>                    Extra:tsf=000000058b811d02
>                    Extra: Last beacon: 62ms ago
>                    IE: Unknown: 000C534652205769466920464F4E
>                    IE: Unknown: 010882848B962430486C
>                    IE: Unknown: 030101
>                    IE: Unknown: 2A0100
>                    IE: Unknown: 2F0100
>                    IE: Unknown: 32040C121860
>                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
>                    IE: Unknown: 3D1601000000000000000000000000000000000000000000
>                    IE: Unknown: DD090010180200F02C0000
>                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
>          Cell 03 - Address: B2:7E:CB:89:0D:DF
>                    Channel:1
>                    Frequency:2.412 GHz (Channel 1)
>                    Quality=64/70  Signal level=-46 dBm  
>                    Encryption key:on
>                    ESSID:"SFR WiFi Mobile"
>                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
>                              24 Mb/s; 36 Mb/s; 54 Mb/s
>                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
>                    Mode:Master
>                    Extra:tsf=000000058b80a9df
>                    Extra: Last beacon: 62ms ago
>                    IE: Unknown: 000F5346522057694669204D6F62696C65
>                    IE: Unknown: 010882848B962430486C
>                    IE: Unknown: 030101
>                    IE: Unknown: 2A0100
>                    IE: Unknown: 2F0100
>                    IE: IEEE 802.11i/WPA2 Version 1
>                        Group Cipher : CCMP
>                        Pairwise Ciphers (1) : CCMP
>                        Authentication Suites (1) : 802.1x
>                    IE: Unknown: 32040C121860
>                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
>                    IE: Unknown: 3D1601000000000000000000000000000000000000000000
>                    IE: Unknown: DD090010180200F02C0000
>                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
>          Cell 04 - Address: C4:EA:1D:AD:9A:FB
>                    Channel:11
>                    Frequency:2.462 GHz (Channel 11)
>                    Quality=66/70  Signal level=-44 dBm  
>                    Encryption key:on
>                    ESSID:"TNCAPAD9AFB"
>                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
>                              24 Mb/s; 36 Mb/s; 54 Mb/s
>                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
>                    Mode:Master
>                    Extra:tsf=00000005898a3121
>                    Extra: Last beacon: 14ms ago
>                    IE: Unknown: 000B544E434150414439414642
>                    IE: Unknown: 010882848B962430486C
>                    IE: Unknown: 03010B
>                    IE: Unknown: 2A0100
>                    IE: Unknown: 2F0100
>                    IE: IEEE 802.11i/WPA2 Version 1
>                        Group Cipher : TKIP
>                        Pairwise Ciphers (1) : CCMP
>                        Authentication Suites (1) : PSK
>                    IE: Unknown: 32040C121860
>                    IE: Unknown: 2D1A1C181BFFFF000000000000000000000000000000000000000000
>                    IE: Unknown: 3D160B080000000000000000000000000000000000000000
>                    IE: Unknown: DD9C0050F204104A0001101044000102103B000103104700107655C526B8AF56BF863FB23DFCD42C2A1021000B546563686E69636F6C6F721023000E4D6564696141636365737320544710240008373838766E20763210420009313534355241424E451054000800060050F2040001101100164D65646961416363657373205447373838766E207632100800020004103C0001011049000600372A000120
>                    IE: Unknown: DD090010180200000C0000
>                    IE: WPA Version 1
>                        Group Cipher : TKIP
>                        Pairwise Ciphers (1) : TKIP
>                        Authentication Suites (1) : PSK
>                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
>
>===============
>iw dev wlp2s0 scan
>BSS c4:ea:1d:ad:9a:fb(on wlp2s0) -- associated
>	TSF: 23815308635 usec (0d, 06:36:55)
>	freq: 2462
>	beacon interval: 100 TUs
>	capability: ESS Privacy ShortSlotTime (0x0411)
>	signal: -44.00 dBm
>	last seen: 0 ms ago
>	Information elements from Probe Response frame:
>	SSID: TNCAPAD9AFB
>	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
>	DS Parameter set: channel 11
>	ERP: <no flags>
>	ERP D4.0: <no flags>
>	RSN:	 * Version: 1
>		 * Group cipher: TKIP
>		 * Pairwise ciphers: CCMP
>		 * Authentication suites: PSK
>		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
>	Extended supported rates: 6.0 9.0 12.0 48.0 
>	HT capabilities:
>		Capabilities: 0x181c
>			HT20
>			SM Power Save disabled
>			RX Greenfield
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 8 usec (0x06)
>		HT RX MCS rate indexes supported: 0-15
>		HT TX MCS rate indexes are undefined
>	HT operation:
>		 * primary channel: 11
>		 * secondary channel offset: no secondary
>		 * STA channel width: 20 MHz
>		 * RIFS: 1
>		 * HT protection: no
>		 * non-GF present: 1
>		 * OBSS non-GF present: 0
>		 * dual beacon: 0
>		 * dual CTS protection: 0
>		 * STBC beacon: 0
>		 * L-SIG TXOP Prot: 0
>		 * PCO active: 0
>		 * PCO phase: 0
>	WPS:	 * Version: 1.0
>		 * Wi-Fi Protected Setup State: 2 (Configured)
>		 * Response Type: 3 (AP)
>		 * UUID: 7655c526-b8af-56bf-863f-b23dfcd42c2a
>		 * Manufacturer: Technicolor
>		 * Model: MediaAccess TG
>		 * Model Number: 788vn v2
>		 * Serial Number: 1545RABNE
>		 * Primary Device Type: 6-0050f204-1
>		 * Device name: MediaAccess TG788vn v2
>		 * Config methods: Label
>		 * RF Bands: 0x1
>		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
>	WPA:	 * Version: 1
>		 * Group cipher: TKIP
>		 * Pairwise ciphers: TKIP
>		 * Authentication suites: PSK
>	WMM:	 * Parameter version 1
>		 * BE: CW 15-1023, AIFSN 3
>		 * BK: CW 15-1023, AIFSN 7
>		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
>		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
>BSS 30:7e:cb:89:0d:dc(on wlp2s0)
>	TSF: 23848437740 usec (0d, 06:37:28)
>	freq: 2437
>	beacon interval: 100 TUs
>	capability: ESS Privacy ShortSlotTime (0x0411)
>	signal: -43.00 dBm
>	last seen: 0 ms ago
>	SSID: SFR_0DD8
>	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
>	DS Parameter set: channel 6
>	ERP: <no flags>
>	ERP D4.0: <no flags>
>	Extended supported rates: 6.0 9.0 12.0 48.0 
>	HT capabilities:
>		Capabilities: 0x18ec
>			HT20
>			SM Power Save disabled
>			RX HT20 SGI
>			RX HT40 SGI
>			TX STBC
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 8 usec (0x06)
>		HT RX MCS rate indexes supported: 0-15
>		HT TX MCS rate indexes are undefined
>	HT operation:
>		 * primary channel: 6
>		 * secondary channel offset: no secondary
>		 * STA channel width: 20 MHz
>		 * RIFS: 0
>		 * HT protection: no
>		 * non-GF present: 0
>		 * OBSS non-GF present: 0
>		 * dual beacon: 0
>		 * dual CTS protection: 0
>		 * STBC beacon: 0
>		 * L-SIG TXOP Prot: 0
>		 * PCO active: 0
>		 * PCO phase: 0
>	WPS:	 * Version: 1.0
>		 * Wi-Fi Protected Setup State: 2 (Configured)
>		 * Response Type: 3 (AP)
>		 * UUID: 00000000-0000-0000-0000-000000000000
>		 * Manufacturer: NB6-SER-r2
>		 * Model: NB6-SER-r2
>		 * Model Number: NB6-SER-r2
>		 * Serial Number: 307ECB890DD8
>		 * Primary Device Type: 6-0050f204-1
>		 * Device name: SFR_0DD8
>		 * Config methods: Label, PBC
>		 * RF Bands: 0x1
>	WPA:	 * Version: 1
>		 * Group cipher: TKIP
>		 * Pairwise ciphers: CCMP TKIP
>		 * Authentication suites: PSK
>		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
>	WMM:	 * Parameter version 1
>		 * u-APSD
>		 * BE: CW 15-1023, AIFSN 3
>		 * BK: CW 15-1023, AIFSN 7
>		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
>		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
>BSS b2:7e:cb:89:0d:dd(on wlp2s0)
>	TSF: 23848443209 usec (0d, 06:37:28)
>	freq: 2437
>	beacon interval: 100 TUs
>	capability: ESS ShortSlotTime (0x0401)
>	signal: -44.00 dBm
>	last seen: 0 ms ago
>	SSID: SFR WiFi FON
>	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
>	DS Parameter set: channel 6
>	ERP: <no flags>
>	ERP D4.0: <no flags>
>	Extended supported rates: 6.0 9.0 12.0 48.0 
>	HT capabilities:
>		Capabilities: 0x18ec
>			HT20
>			SM Power Save disabled
>			RX HT20 SGI
>			RX HT40 SGI
>			TX STBC
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 8 usec (0x06)
>		HT RX MCS rate indexes supported: 0-15
>		HT TX MCS rate indexes are undefined
>	HT operation:
>		 * primary channel: 6
>		 * secondary channel offset: no secondary
>		 * STA channel width: 20 MHz
>		 * RIFS: 0
>		 * HT protection: no
>		 * non-GF present: 0
>		 * OBSS non-GF present: 0
>		 * dual beacon: 0
>		 * dual CTS protection: 0
>		 * STBC beacon: 0
>		 * L-SIG TXOP Prot: 0
>		 * PCO active: 0
>		 * PCO phase: 0
>	WMM:	 * Parameter version 1
>		 * u-APSD
>		 * BE: CW 15-1023, AIFSN 3
>		 * BK: CW 15-1023, AIFSN 7
>		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
>		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
>BSS b2:7e:cb:89:0d:df(on wlp2s0)
>	TSF: 23848445200 usec (0d, 06:37:28)
>	freq: 2437
>	beacon interval: 100 TUs
>	capability: ESS Privacy ShortSlotTime (0x0411)
>	signal: -44.00 dBm
>	last seen: 0 ms ago
>	Information elements from Probe Response frame:
>	SSID: SFR WiFi Mobile
>	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
>	DS Parameter set: channel 6
>	ERP: <no flags>
>	ERP D4.0: <no flags>
>	RSN:	 * Version: 1
>		 * Group cipher: CCMP
>		 * Pairwise ciphers: CCMP
>		 * Authentication suites: IEEE 802.1X
>		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
>	Extended supported rates: 6.0 9.0 12.0 48.0 
>	HT capabilities:
>		Capabilities: 0x18ec
>			HT20
>			SM Power Save disabled
>			RX HT20 SGI
>			RX HT40 SGI
>			TX STBC
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 8 usec (0x06)
>		HT RX MCS rate indexes supported: 0-15
>		HT TX MCS rate indexes are undefined
>	HT operation:
>		 * primary channel: 6
>		 * secondary channel offset: no secondary
>		 * STA channel width: 20 MHz
>		 * RIFS: 0
>		 * HT protection: no
>		 * non-GF present: 0
>		 * OBSS non-GF present: 0
>		 * dual beacon: 0
>		 * dual CTS protection: 0
>		 * STBC beacon: 0
>		 * L-SIG TXOP Prot: 0
>		 * PCO active: 0
>		 * PCO phase: 0
>	WMM:	 * Parameter version 1
>		 * u-APSD
>		 * BE: CW 15-1023, AIFSN 3
>		 * BK: CW 15-1023, AIFSN 7
>		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
>		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
>===============
>dmesg
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 4.1.15-desktop-2.mga5 (iurt@sucuk.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jan 20 17:05:51 UTC 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=c9a7e958-3a42-4686-b656-708b422161f4 ro splash quiet noiswmd
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca11efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ca11f000-0x00000000ca125fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ca126000-0x00000000ca9a7fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ca9a8000-0x00000000cac33fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000cac34000-0x00000000da08afff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000da08b000-0x00000000da29cfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000da29d000-0x00000000da42efff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000da42f000-0x00000000dab19fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dab1a000-0x00000000daf53fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000daf54000-0x00000000daffefff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dbc00000-0x00000000dfdfffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f1fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by American Megatrends
>[    0.000000] efi:  ACPI=0xda4b3000  ACPI 2.0=0xda4b3000  SMBIOS=0xdaf52318 
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: ASUSTeK COMPUTER INC. UX303LA/UX303LA, BIOS UX303LA.204 09/01/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x31f200 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
>[    0.000000]   1 base 0200000000 mask 7F00000000 write-back
>[    0.000000]   2 base 0300000000 mask 7FE0000000 write-back
>[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   4 base 00DC000000 mask 7FFC000000 uncachable
>[    0.000000]   5 base 00DBC00000 mask 7FFFC00000 uncachable
>[    0.000000]   6 base 031F800000 mask 7FFF800000 uncachable
>[    0.000000]   7 base 031F400000 mask 7FFFC00000 uncachable
>[    0.000000]   8 base 031F200000 mask 7FFFE00000 uncachable
>[    0.000000]   9 disabled
>[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
>[    0.000000] e820: update [mem 0xdbc00000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x02f4b000, 0x02f4bfff] PGTABLE
>[    0.000000] BRK [0x02f4c000, 0x02f4cfff] PGTABLE
>[    0.000000] BRK [0x02f4d000, 0x02f4dfff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x31f000000-0x31f1fffff]
>[    0.000000]  [mem 0x31f000000-0x31f1fffff] page 2M
>[    0.000000] BRK [0x02f4e000, 0x02f4efff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x300000000-0x31effffff]
>[    0.000000]  [mem 0x300000000-0x31effffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x2e0000000-0x2ffffffff]
>[    0.000000]  [mem 0x2e0000000-0x2ffffffff] page 1G
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xca11efff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
>[    0.000000]  [mem 0xc0000000-0xc9ffffff] page 2M
>[    0.000000]  [mem 0xca000000-0xca11efff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xca126000-0xca9a7fff]
>[    0.000000]  [mem 0xca126000-0xca1fffff] page 4k
>[    0.000000]  [mem 0xca200000-0xca7fffff] page 2M
>[    0.000000]  [mem 0xca800000-0xca9a7fff] page 4k
>[    0.000000] BRK [0x02f4f000, 0x02f4ffff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xcac34000-0xda08afff]
>[    0.000000]  [mem 0xcac34000-0xcadfffff] page 4k
>[    0.000000]  [mem 0xcae00000-0xd9ffffff] page 2M
>[    0.000000]  [mem 0xda000000-0xda08afff] page 4k
>[    0.000000] BRK [0x02f50000, 0x02f50fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xda29d000-0xda42efff]
>[    0.000000]  [mem 0xda29d000-0xda42efff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
>[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x2dfffffff]
>[    0.000000]  [mem 0x100000000-0x2dfffffff] page 1G
>[    0.000000] RAMDISK: [mem 0x36e5c000-0x37725fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000DA4B3000 000024 (v02 _ASUS_)
>[    0.000000] ACPI: XSDT 0x00000000DA4B3098 0000AC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000DA4C9C58 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000DA4B3258 0169FD (v02 _ASUS_ Notebook 00000012 INTL 20120711)
>[    0.000000] ACPI: FACS 0x00000000DAB18F80 000040
>[    0.000000] ACPI: APIC 0x00000000DA4C9D68 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000DA4C9DE0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
>[    0.000000] ACPI: ECDT 0x00000000DA4C9E28 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
>[    0.000000] ACPI: LPIT 0x00000000DA4C9EF0 000094 (v01 ALASKA          00000000 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000DA4C9F88 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DA4CA4C8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DA4CAFA0 0002DE (v01 PmRef  Cpu0Tst  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DA4CB280 000348 (v01 PmRef  ApTst    00003000 INTL 20120711)
>[    0.000000] ACPI: MCFG 0x00000000DA4CB5C8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
>[    0.000000] ACPI: SSDT 0x00000000DA4CB608 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: HPET 0x00000000DA4CE678 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000DA4CE6B0 0002D7 (v01 SataRe SataTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DA4CE988 003F96 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
>[    0.000000] ACPI: BGRT 0x00000000DA4D2920 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
>[    0.000000] ACPI: SSDT 0x00000000DA4D2958 0006EB (v01 Intel_ IsctTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: MSDM 0x00000000DA29AE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f1fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x31f1f5000-0x31f1f9fff]
>[    0.000000]  [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312800000-ffff88031e7fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031f1fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ca11efff]
>[    0.000000]   node   0: [mem 0x00000000ca126000-0x00000000ca9a7fff]
>[    0.000000]   node   0: [mem 0x00000000cac34000-0x00000000da08afff]
>[    0.000000]   node   0: [mem 0x00000000da29d000-0x00000000da42efff]
>[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031f1fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f1fffff]
>[    0.000000] On node 0 totalpages: 3117351
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 22 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13887 pages used for memmap
>[    0.000000]   DMA32 zone: 888715 pages, LIFO batch:31
>[    0.000000]   Normal zone: 34760 pages used for memmap
>[    0.000000]   Normal zone: 2224640 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xdbe00000-0xdfdfffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xca11f000-0xca125fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xca9a8000-0xcac33fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda08b000-0xda29cfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xda42f000-0xdab19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdab1a000-0xdaf53fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdaf54000-0xdaffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdbbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdbc00000-0xdfdfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88031ee00000 s99224 r8192 d31848 u524288
>[    0.000000] pcpu-alloc: s99224 r8192 d31848 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3068618
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=c9a7e958-3a42-4686-b656-708b422161f4 ro splash quiet noiswmd
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 12140712K/12469404K available (7129K kernel code, 1177K rwdata, 3428K rodata, 1340K init, 816K bss, 328692K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:4352 nr_irqs:728 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2593.942 MHz processor
>[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.88 BogoMIPS (lpj=2593942)
>[    0.000037] pid_max: default: 32768 minimum: 301
>[    0.000043] ACPI: Core revision 20150410
>[    0.029135] ACPI: All ACPI Tables successfully acquired
>[    0.030102] Security Framework initialized
>[    0.030110] TOMOYO Linux initialized
>[    0.031289] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.035078] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.036634] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.036655] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.036906] Initializing cgroup subsys blkio
>[    0.036909] Initializing cgroup subsys devices
>[    0.036911] Initializing cgroup subsys freezer
>[    0.036914] Initializing cgroup subsys net_cls
>[    0.036937] CPU: Physical Processor ID: 0
>[    0.036938] CPU: Processor Core ID: 0
>[    0.036943] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.036944] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.038041] mce: CPU supports 7 MCE banks
>[    0.038054] CPU0: Thermal monitoring enabled (TM1)
>[    0.038064] process: using mwait in idle threads
>[    0.038067] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.038068] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.038481] Freeing SMP alternatives memory: 24K (ffffffff81e77000 - ffffffff81e7d000)
>[    0.041845] ftrace: allocating 26396 entries in 104 pages
>[    0.055360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.065373] TSC deadline timer enabled
>[    0.065376] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
>[    0.065402] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>[    0.065424] ... version:                3
>[    0.065425] ... bit width:              48
>[    0.065426] ... generic registers:      4
>[    0.065427] ... value mask:             0000ffffffffffff
>[    0.065428] ... max period:             0000ffffffffffff
>[    0.065429] ... fixed-purpose events:   3
>[    0.065430] ... event mask:             000000070000000f
>[    0.066029] x86: Booting SMP configuration:
>[    0.066031] .... node  #0, CPUs:      #1 #2 #3
>[    0.109221] x86: Booted up 1 node, 4 CPUs
>[    0.109224] smpboot: Total of 4 processors activated (20751.53 BogoMIPS)
>[    0.114390] devtmpfs: initialized
>[    0.117624] PM: Registering ACPI NVS region [mem 0xca11f000-0xca125fff] (28672 bytes)
>[    0.117626] PM: Registering ACPI NVS region [mem 0xda42f000-0xdab19fff] (7254016 bytes)
>[    0.117797] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.117875] xor: automatically using best checksumming function:
>[    0.127236]    avx       : 26956.000 MB/sec
>[    0.127246] pinctrl core: initialized pinctrl subsystem
>[    0.127341] RTC time:  7:19:17, date: 01/13/17
>[    0.127463] NET: Registered protocol family 16
>[    0.132263] cpuidle: using governor ladder
>[    0.138280] cpuidle: using governor menu
>[    0.138334] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.138336] ACPI: bus type PCI registered
>[    0.138337] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.138413] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.138416] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.138514] PCI: Using configuration type 1 for base access
>[    0.138785] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.161337] raid6: sse2x1   gen()  6125 MB/s
>[    0.178368] raid6: sse2x1   xor()  4791 MB/s
>[    0.195402] raid6: sse2x2   gen()  7691 MB/s
>[    0.212430] raid6: sse2x2   xor()  5464 MB/s
>[    0.229469] raid6: sse2x4   gen()  9003 MB/s
>[    0.246498] raid6: sse2x4   xor()  6228 MB/s
>[    0.263530] raid6: avx2x1   gen() 12011 MB/s
>[    0.280565] raid6: avx2x2   gen() 13816 MB/s
>[    0.297597] raid6: avx2x4   gen() 16273 MB/s
>[    0.297599] raid6: using algorithm avx2x4 gen() 16273 MB/s
>[    0.297600] raid6: using avx2x2 recovery algorithm
>[    0.297699] ACPI: Added _OSI(Module Device)
>[    0.297701] ACPI: Added _OSI(Processor Device)
>[    0.297702] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.297704] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.300864] ACPI : EC: EC description table is found, configuring boot EC
>[    0.300878] ACPI : EC: EC started
>[    0.304125] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.308048] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.310103] ACPI: Dynamic OEM Table Load:
>[    0.310111] ACPI: SSDT 0xFFFF880310560800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.311150] ACPI: Dynamic OEM Table Load:
>[    0.311157] ACPI: SSDT 0xFFFF880310493000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.312242] ACPI: Dynamic OEM Table Load:
>[    0.312247] ACPI: SSDT 0xFFFF8803104F1A00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.313945] ACPI: Interpreter enabled
>[    0.313956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
>[    0.313963] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
>[    0.313986] ACPI: (supports S0 S3 S4 S5)
>[    0.313988] ACPI: Using IOAPIC for interrupt routing
>[    0.314017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.327149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.327155] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.327406] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
>[    0.327617] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
>[    0.327619] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.327976] PCI host bridge to bus 0000:00
>[    0.327979] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.327982] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.327983] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.327985] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.327987] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.327989] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.327990] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.327992] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.327993] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.327995] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.327996] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.327998] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.328000] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff window]
>[    0.328007] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
>[    0.328112] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
>[    0.328124] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
>[    0.328132] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.328137] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.328228] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
>[    0.328237] pci 0000:00:03.0: reg 0x10: [mem 0xf7d1c000-0xf7d1ffff 64bit]
>[    0.328336] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
>[    0.328347] pci 0000:00:04.0: reg 0x10: [mem 0xf7d10000-0xf7d17fff 64bit]
>[    0.328464] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
>[    0.328480] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
>[    0.328535] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.328583] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.328619] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
>[    0.328638] pci 0000:00:16.0: reg 0x10: [mem 0xf7d24000-0xf7d2401f 64bit]
>[    0.328706] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.328794] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
>[    0.328810] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d18000-0xf7d1bfff 64bit]
>[    0.328872] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.328924] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.328963] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
>[    0.329030] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.329122] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.329164] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
>[    0.329235] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.329324] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.329370] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
>[    0.329553] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
>[    0.329566] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
>[    0.329574] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
>[    0.329581] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
>[    0.329589] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
>[    0.329596] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.329604] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d22000-0xf7d227ff]
>[    0.329635] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.329717] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
>[    0.329731] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d21000-0xf7d210ff 64bit]
>[    0.329751] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.329848] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
>[    0.329876] pci 0000:00:1f.6: reg 0x10: [mem 0xf7d20000-0xf7d20fff 64bit]
>[    0.330113] acpiphp: Slot [1] registered
>[    0.330120] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.330405] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
>[    0.330492] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
>[    0.330819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.330856] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.332854] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.332859] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.333909] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>[    0.333961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334058] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334106] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334202] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
>[    0.334590] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.334671] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.334771] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.334773] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.334775] vgaarb: loaded
>[    0.334776] vgaarb: bridge control possible 0000:00:02.0
>[    0.334968] SCSI subsystem initialized
>[    0.335006] libata version 3.00 loaded.
>[    0.335173] PCI: Using ACPI for IRQ routing
>[    0.336561] PCI: pci_cache_line_size set to 64 bytes
>[    0.336875] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.336877] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.336878] e820: reserve RAM buffer [mem 0xca11f000-0xcbffffff]
>[    0.336879] e820: reserve RAM buffer [mem 0xca9a8000-0xcbffffff]
>[    0.336881] e820: reserve RAM buffer [mem 0xda08b000-0xdbffffff]
>[    0.336883] e820: reserve RAM buffer [mem 0xda42f000-0xdbffffff]
>[    0.336884] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
>[    0.336886] e820: reserve RAM buffer [mem 0x31f200000-0x31fffffff]
>[    0.336991] NetLabel: Initializing
>[    0.336992] NetLabel:  domain hash size = 128
>[    0.336993] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.337005] NetLabel:  unlabeled traffic allowed by default
>[    0.337042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.337048] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.339076] Switched to clocksource hpet
>[    0.345300] pnp: PnP ACPI init
>[    0.345400] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.345405] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.345624] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.345626] system 00:01: [io  0xffff] has been reserved
>[    0.345628] system 00:01: [io  0xffff] has been reserved
>[    0.345630] system 00:01: [io  0xffff] has been reserved
>[    0.345632] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.345633] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.345636] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.345638] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.345640] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.345642] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.345645] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345672] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.345718] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.345720] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.345762] system 00:04: [io  0x04d0-0x04d1] has been reserved
>[    0.345765] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345793] system 00:05: [io  0x0240-0x0259] has been reserved
>[    0.345795] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.345851] pnp 00:06: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
>[    0.345889] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
>[    0.346220] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346471] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.346473] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.346475] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.346478] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.346480] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.346482] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.346484] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.346486] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.346488] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
>[    0.346490] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.346492] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
>[    0.346494] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
>[    0.346496] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346567] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346913] pnp: PnP ACPI: found 11 devices
>[    0.353111] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.353138] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.353151] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.353156] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.353166] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.353168] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.353170] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.353171] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.353173] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.353174] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.353176] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.353178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.353179] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.353181] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.353183] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.353184] pci_bus 0000:00: resource 15 [mem 0xdfe00000-0xfeafffff window]
>[    0.353187] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
>[    0.353218] NET: Registered protocol family 2
>[    0.353449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.353683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.353816] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.353852] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.353906] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.353978] NET: Registered protocol family 1
>[    0.353995] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.354337] PCI: CLS 64 bytes, default 64
>[    0.354385] Trying to unpack rootfs image as initramfs...
>[    0.464819] Freeing initrd memory: 9000K (ffff880036e5c000 - ffff880037726000)
>[    0.464841] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.464844] software IO TLB [mem 0xd373b000-0xd773b000] (64MB) mapped at [ffff8800d373b000-ffff8800d773afff]
>[    0.464903] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    0.464904] hw unit of domain pp0-core 2^-14 Joules
>[    0.464905] hw unit of domain package 2^-14 Joules
>[    0.464906] hw unit of domain dram 2^-14 Joules
>[    0.464907] hw unit of domain pp1-gpu 2^-14 Joules
>[    0.465283] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.465314] audit: initializing netlink subsys (disabled)
>[    0.465327] audit: type=2000 audit(1484291957.449:1): initialized
>[    0.465681] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.465683] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.467203] zpool: loaded
>[    0.467206] zbud: loaded
>[    0.467379] VFS: Disk quotas dquot_6.6.0
>[    0.467414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.468022] bounce: pool size: 64 pages
>[    0.468055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.468089] io scheduler noop registered
>[    0.468093] io scheduler deadline registered
>[    0.468124] io scheduler cfq registered (default)
>[    0.468485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.468501] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.468550] efifb: probing for efifb
>[    0.468572] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
>[    0.468573] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    0.468574] efifb: scrolling: redraw
>[    0.468576] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.473577] Console: switching to colour frame buffer device 240x67
>[    0.478480] fb0: EFI VGA frame buffer device
>[    0.478490] intel_idle: MWAIT substates: 0x11142120
>[    0.478491] intel_idle: v0.4 model 0x45
>[    0.478492] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.478767] GHES: HEST is not enabled!
>[    0.478839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.479276] Linux agpgart interface v0.103
>[    0.480962] brd: module loaded
>[    0.481115] ahci 0000:00:1f.2: version 3.0
>[    0.481258] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.492247] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
>[    0.492252] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
>[    0.492917] scsi host0: ahci
>[    0.493262] scsi host1: ahci
>[    0.493470] scsi host2: ahci
>[    0.493664] scsi host3: ahci
>[    0.493715] ata1: SATA max UDMA/133 abar m2048@0xf7d22000 port 0xf7d22100 irq 40
>[    0.493717] ata2: DUMMY
>[    0.493718] ata3: DUMMY
>[    0.493719] ata4: DUMMY
>[    0.493818] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    0.496810] i8042: Detected active multiplexing controller, rev 1.1
>[    0.498301] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.498306] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.498314] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.498316] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.498318] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.498533] mousedev: PS/2 mouse device common for all mice
>[    0.498620] rtc_cmos 00:02: RTC can wake from S4
>[    0.498753] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.498783] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.498800] Intel P-state driver initializing.
>[    0.498929] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.498932] EFI Variables Facility v0.08 2004-May-17
>[    0.501291] Key type dns_resolver registered
>[    0.501294] mpls_gso: MPLS GSO support
>[    0.501712] registered taskstats version 1
>[    0.502031] Btrfs loaded
>[    0.502520]   Magic number: 1:955:318
>[    0.502542] tty tty43: hash matches
>[    0.502560] acpi ELAN1000:00: hash matches
>[    0.502631] rtc_cmos 00:02: setting system clock to 2017-01-13 07:19:18 UTC (1484291958)
>[    0.502665] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    0.502665] EDD information not available.
>[    0.502735] PM: Hibernation image not present or could not be loaded.
>[    0.538649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    0.777749] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input8
>[    0.798429] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.798723] ata1.00: supports DRM functions and may not be fully accessible
>[    0.798834] ata1.00: READ LOG DMA EXT failed, trying unqueued
>[    0.798889] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    0.798891] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
>[    0.798893] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    0.799217] ata1.00: supports DRM functions and may not be fully accessible
>[    0.799272] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    0.799276] ata1.00: configured for UDMA/133
>[    0.799458] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  CB6Q PQ: 0 ANSI: 5
>[    0.799778] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    0.799909] sd 0:0:0:0: [sda] Write Protect is off
>[    0.799913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.799958] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.812458]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
>[    0.813053] sd 0:0:0:0: [sda] Attached SCSI disk
>[    0.813305] Freeing unused kernel memory: 1340K (ffffffff81d28000 - ffffffff81e77000)
>[    0.813307] Write protecting the kernel read-only data: 12288k
>[    0.813629] Freeing unused kernel memory: 1052K (ffff8800026f9000 - ffff880002800000)
>[    0.813779] Freeing unused kernel memory: 668K (ffff880002b59000 - ffff880002c00000)
>[    0.849968] dracut: dracut-038
>[    0.917642] random: systemd-udevd urandom read with 5 bits of entropy available
>[    0.946063] [drm] Initialized drm 1.1.0 20060810
>[    0.953021] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
>[    0.953854] ACPI: Lid Switch [LID]
>[    0.953900] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
>[    0.953904] ACPI: Sleep Button [SLPB]
>[    0.953948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
>[    0.953951] ACPI: Power Button [PWRF]
>[    0.989719] [drm] Memory usable by graphics device = 2048M
>[    0.989722] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
>[    0.989723] fb: switching to inteldrmfb from EFI VGA
>[    0.989739] Console: switching to colour dummy device 80x25
>[    0.989817] [drm] Replacing VGA console driver
>[    0.995630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    0.995633] [drm] Driver supports precise vblank timestamp query.
>[    0.995712] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.012449] fbcon: inteldrmfb (fb0) is primary device
>[    1.013454] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.015689] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
>[    1.015723] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
>[    1.464851] tsc: Refined TSC clocksource calibration: 2593.998 MHz
>[    1.464854] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2564164249b, max_idle_ns: 440795293190 ns
>[    2.282172] Console: switching to colour frame buffer device 240x67
>[    2.287130] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.287132] i915 0000:00:02.0: registered panic notifier
>[    2.294208] dracut: Starting plymouth daemon
>[    2.465462] Switched to clocksource tsc
>[    3.116636] sdhci: Secure Digital Host Controller Interface driver
>[    3.116638] sdhci: Copyright(c) Pierre Ossman
>[    3.134156] ACPI: bus type USB registered
>[    3.134187] usbcore: registered new interface driver usbfs
>[    3.134200] usbcore: registered new interface driver hub
>[    3.134225] usbcore: registered new device driver usb
>[    3.144043] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.144050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    3.145134] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
>[    3.145142] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    3.145225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    3.145227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.145229] usb usb1: Product: xHCI Host Controller
>[    3.145231] usb usb1: Manufacturer: Linux 4.1.15-desktop-2.mga5 xhci-hcd
>[    3.145233] usb usb1: SerialNumber: 0000:00:14.0
>[    3.145339] hub 1-0:1.0: USB hub found
>[    3.145349] hub 1-0:1.0: 9 ports detected
>[    3.145462] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    3.145465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    3.145488] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    3.145489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.145490] usb usb2: Product: xHCI Host Controller
>[    3.145492] usb usb2: Manufacturer: Linux 4.1.15-desktop-2.mga5 xhci-hcd
>[    3.145492] usb usb2: SerialNumber: 0000:00:14.0
>[    3.145562] hub 2-0:1.0: USB hub found
>[    3.145570] hub 2-0:1.0: 4 ports detected
>[    3.347113] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
>[    3.359581] usb 2-2: New USB device found, idVendor=174c, idProduct=1153
>[    3.359585] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    3.359587] usb 2-2: Product: AS2115
>[    3.359588] usb 2-2: Manufacturer: ASMedia
>[    3.359590] usb 2-2: SerialNumber: 00000000000000000000
>[    3.498094] usb 1-1: new low-speed USB device number 2 using xhci_hcd
>[    3.653606] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[    3.665392] usb 1-1: New USB device found, idVendor=093a, idProduct=2510
>[    3.665395] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.665398] usb 1-1: Product: USB Optical Mouse
>[    3.665400] usb 1-1: Manufacturer: PixArt
>[    3.665502] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.671594] hidraw: raw HID events driver (C) Jiri Kosina
>[    3.676024] usbcore: registered new interface driver usbhid
>[    3.676027] usbhid: USB HID core driver
>[    3.676697] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input13
>[    3.676769] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[    3.694575] dracut: Checking ext4: /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4
>[    3.694714] dracut: issuing e2fsck -a  /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4
>[    3.723880] dracut: /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4: clean, 560172/1574880 files, 5341348/6294784 blocks
>[    3.725120] dracut: Mounting /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4 with -o noatime,acl,ro
>[    3.741191] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
>[    3.784080] dracut: Mounted root filesystem /dev/sda6
>[    3.828236] usb 1-3: new high-speed USB device number 3 using xhci_hcd
>[    3.845206] dracut: Switching root
>[    3.857083] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>[    3.997828] usb 1-3: New USB device found, idVendor=05dc, idProduct=a838
>[    3.997830] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.997831] usb 1-3: Product: USB Flash Drive
>[    3.997833] usb 1-3: Manufacturer: Lexar
>[    3.997834] usb 1-3: SerialNumber: AAM29EHK60BE4U10
>[    4.151440] usb 1-5: new high-speed USB device number 4 using xhci_hcd
>[    4.354418] usb 1-5: New USB device found, idVendor=064e, idProduct=9700
>[    4.354420] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    4.354422] usb 1-5: Product: USB2.0 UVC HD Webcam
>[    4.354423] usb 1-5: Manufacturer: SuYin
>[    4.354424] usb 1-5: SerialNumber: HF1019-T838-SN03-Rev0101
>[    4.511692] usb 1-7: new full-speed USB device number 5 using xhci_hcd
>[    4.684784] usb 1-7: New USB device found, idVendor=03eb, idProduct=8a31
>[    4.684788] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.684790] usb 1-7: Product: Atmel maXTouch Digitizer
>[    4.684792] usb 1-7: Manufacturer: Atmel
>[    4.694877] hid-generic 0003:03EB:8A31.0003: hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
>[    4.847877] usb 1-8: new full-speed USB device number 6 using xhci_hcd
>[    5.013265] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc
>[    5.013269] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    5.061883] NET: Registered protocol family 10
>[    5.460624] RPC: Registered named UNIX socket transport module.
>[    5.460627] RPC: Registered udp transport module.
>[    5.460628] RPC: Registered tcp transport module.
>[    5.460629] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    5.572617] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    5.599242] Non-volatile memory driver v1.3
>[    5.645586] EXT4-fs (sda6): re-mounted. Opts: acl
>[    5.657247] systemd-journald[433]: Received request to flush runtime journal from PID 1
>[    6.395006] ACPI: AC Adapter [AC0] (on-line)
>[    6.434624] thermal LNXTHERM:00: registered as thermal_zone2
>[    6.434628] ACPI: Thermal Zone [THRM] (34 C)
>[    6.438396] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    6.445069] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150410/utaddress-254)
>[    6.445077] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
>[    6.445082] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.481132] wmi: Mapper loaded
>[    6.486259] ACPI: Battery Slot [BAT0] (battery present)
>[    6.510495] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
>[    6.518177] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
>[    6.519942] microcode: CPU0 updated to revision 0x1d, date = 2015-08-13
>[    6.520766] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[    6.520804] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[    6.521765] microcode: CPU1 updated to revision 0x1d, date = 2015-08-13
>[    6.521774] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[    6.521801] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[    6.522761] microcode: CPU2 updated to revision 0x1d, date = 2015-08-13
>[    6.522776] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
>[    6.522803] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
>[    6.523766] microcode: CPU3 updated to revision 0x1d, date = 2015-08-13
>[    6.523873] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    6.548482] AVX2 version of gcm_enc/dec engaged.
>[    6.548484] AES CTR mode by8 optimization enabled
>[    6.550490] iTCO_vendor_support: vendor-support=0
>[    6.559334] cfg80211: Calling CRDA to update world regulatory domain
>[    6.644969] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    6.645009] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    6.645099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>[    6.668639] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    6.720614] asus_wmi: ASUS WMI generic driver loaded
>[    6.722972] Intel(R) Wireless WiFi driver for Linux
>[    6.722974] Copyright(c) 2003- 2015 Intel Corporation
>[    6.728364] asus_wmi: Initialization: 0x1
>[    6.728417] asus_wmi: BIOS WMI version: 7.9
>[    6.728492] asus_wmi: SFUN value: 0x4a2877
>[    6.729220] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
>[    6.729409] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
>[    6.729521] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
>[    6.729523] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    6.729525] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
>[    6.729527] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
>[    6.729529] snd_hda_codec_conexant hdaudioC1D0:    inputs:
>[    6.729531] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
>[    6.729533] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
>[    6.730889] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
>[    6.736939] iwlwifi 0000:02:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
>[    6.737014] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
>[    6.737183] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
>[    6.737917] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
>[    6.739885] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
>[    6.739962] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
>[    6.740038] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
>[    6.745950] asus_wmi: Backlight controlled by ACPI video driver
>[    7.147329] cfg80211: World regulatory domain updated:
>[    7.147333] cfg80211:  DFS Master region: unset
>[    7.147334] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[    7.147337] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[    7.147339] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[    7.147340] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[    7.147342] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[    7.147344] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[    7.147346] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[    7.147347] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[    7.147349] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[    7.182079] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
>[    7.182462] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    7.182961] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    7.206340] intel_rapl: Found RAPL domain package
>[    7.206344] intel_rapl: Found RAPL domain core
>[    7.206347] intel_rapl: Found RAPL domain uncore
>[    7.206349] intel_rapl: Found RAPL domain dram
>[    7.208584] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A31.0002/input/input21
>[    7.208686] hid-multitouch 0003:03EB:8A31.0002: input,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
>[    7.243060] usb-storage 2-2:1.0: USB Mass Storage device detected
>[    7.243462] scsi host4: usb-storage 2-2:1.0
>[    7.243846] usb-storage 1-3:1.0: USB Mass Storage device detected
>[    7.243895] scsi host5: usb-storage 1-3:1.0
>[    7.243993] usbcore: registered new interface driver usb-storage
>[    7.244026] media: Linux media interface: v0.10
>[    7.261373] Bluetooth: Core ver 2.20
>[    7.261384] NET: Registered protocol family 31
>[    7.261385] Bluetooth: HCI device and connection manager initialized
>[    7.261387] Bluetooth: HCI socket layer initialized
>[    7.261389] Bluetooth: L2CAP socket layer initialized
>[    7.261392] Bluetooth: SCO socket layer initialized
>[    7.266764] Linux video capture interface: v2.00
>[    7.312924] usbcore: registered new interface driver btusb
>[    7.325270] Bluetooth: hci0: read Intel version: 370710018002030d00
>[    7.325602] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
>[    7.331859] device-mapper: uevent: version 1.0.3
>[    7.331934] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
>[    7.332681] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
>[    7.336861] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22
>[    7.336930] usbcore: registered new interface driver uvcvideo
>[    7.336932] USB Video Class driver (1.1.1)
>[    7.353345] ata1.00: supports DRM functions and may not be fully accessible
>[    7.353388] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    7.353534] ata1.00: supports DRM functions and may not be fully accessible
>[    7.353568] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    7.353571] ata1.00: configured for UDMA/133
>[    7.353579] ata1: EH complete
>[    7.361693] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
>[    7.367666] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    7.394841] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    7.419105] cfg80211: Calling CRDA for country: FR
>[    7.420696] cfg80211: Regulatory domain changed to country: FR
>[    7.420699] cfg80211:  DFS Master region: ETSI
>[    7.420701] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[    7.420703] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[    7.420705] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[    7.420708] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[    7.420710] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[    7.420711] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[    7.454365] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[    7.492137] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
>[    7.494376] random: nonblocking pool is initialized
>[    7.629935] ata1.00: supports DRM functions and may not be fully accessible
>[    7.630000] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    7.630147] ata1.00: supports DRM functions and may not be fully accessible
>[    7.630178] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[    7.630181] ata1.00: configured for UDMA/133
>[    7.630189] ata1: EH complete
>[    7.640764] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
>[    8.244410] scsi 4:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
>[    8.244738] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[    8.244980] sd 4:0:0:0: [sdb] Write Protect is off
>[    8.244984] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
>[    8.245225] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    9.104938] scsi 5:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 6
>[    9.106058] sd 5:0:0:0: [sdc] 62517248 512-byte logical blocks: (32.0 GB/29.8 GiB)
>[    9.106784] sd 5:0:0:0: [sdc] Write Protect is off
>[    9.106788] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
>[    9.107474] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    9.113854]  sdc: sdc1
>[    9.116348] sd 5:0:0:0: [sdc] Attached SCSI removable disk
>[    9.832133]  sdb: sdb1 sdb2
>[    9.833066] sd 4:0:0:0: [sdb] Attached SCSI disk
>[   95.514456] NET: Registered protocol family 38
>[   95.819355] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[  101.526011] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[  101.526014] Bluetooth: BNEP filters: protocol multicast
>[  101.526018] Bluetooth: BNEP socket layer initialized
>[  104.729717] usbcore: registered new interface driver r8152
>[  105.519948] PPP generic driver version 2.4.2
>[  105.816868] vboxdrv: Found 4 processor cores
>[  105.833005] vboxdrv: TSC mode is Invariant, tentative frequency 2593980308 Hz
>[  105.833008] vboxdrv: Successfully loaded version 5.0.16_OSE (interface 0x00240000)
>[  105.835645] VBoxNetFlt: Successfully started.
>[  105.837149] VBoxNetAdp: Successfully started.
>[  106.023600] Process accounting resumed
>[  106.075894] NFSD: starting 90-second grace period (net ffffffff81ce7100)
>[  106.089486] ip_tables: (C) 2000-2006 Netfilter Core Team
>[  107.010348] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[  107.058486] Netfilter messages via NETLINK v0.30.
>[  107.062390] ctnetlink v0.93: registering with nfnetlink.
>[  107.348134] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[  108.073906] ip_set: protocol 6
>[  108.098798] netfilter PSD loaded - (c) astaro AG
>[  108.100043] IFWLOG: register target
>[  108.276462] fuse init (API version 7.23)
>[  131.993134] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  131.993741] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  132.191595] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  132.192156] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  132.216108] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  187.395901] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.396710] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.591173] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.592078] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.615990] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  187.626025] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.626703] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.827846] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.828347] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[  187.849073] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
>[  187.923068] NET: Registered protocol family 17
>[  190.536571] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
>[  190.544778] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
>[  190.558058] wlp2s0: authenticated
>[  190.558293] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
>[  190.562013] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
>[  190.563694] wlp2s0: associated
>[  190.563721] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
>[  261.019315] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[  302.712356] Adjusting tsc more than 11% (5419175 vs 7179153)
>[ 3567.277669] cfg80211: Calling CRDA to update world regulatory domain
>[ 3567.279692] cfg80211: World regulatory domain updated:
>[ 3567.279696] cfg80211:  DFS Master region: unset
>[ 3567.279697] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 3567.279699] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 3567.279701] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 3567.279703] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[ 3567.279705] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 3567.279707] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 3567.279708] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[ 3567.279709] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[ 3567.279711] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[ 3567.279839] cfg80211: Calling CRDA for country: FR
>[ 3567.280996] cfg80211: Regulatory domain changed to country: FR
>[ 3567.280998] cfg80211:  DFS Master region: ETSI
>[ 3567.280999] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 3567.281000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 3567.281003] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 3567.281004] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 3567.281005] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[ 3567.281006] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[ 3570.058543] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
>[ 3570.064196] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
>[ 3570.066289] wlp2s0: authenticated
>[ 3570.067344] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
>[ 3570.070971] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
>[ 3570.073186] wlp2s0: associated
>[ 4378.297783] usb 1-1: USB disconnect, device number 2
>[ 4404.245143] usb 2-2: USB disconnect, device number 2
>[ 4404.250427] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
>[ 4404.250462] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[ 4407.561028] usb 1-3: USB disconnect, device number 3
>[ 4407.561330] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
>[ 4407.561360] sd 5:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>[ 4409.645419] ata1.00: supports DRM functions and may not be fully accessible
>[ 4409.645611] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4409.645841] ata1.00: supports DRM functions and may not be fully accessible
>[ 4409.645906] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4409.645909] ata1.00: configured for UDMA/133
>[ 4409.645917] ata1: EH complete
>[ 4409.645987] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 4409.673540] EXT4-fs (sda6): re-mounted. Opts: acl,commit=600
>[ 4409.730233] EXT4-fs (dm-1): re-mounted. Opts: commit=600
>[ 4412.616318] usb 1-7: USB disconnect, device number 5
>[ 4412.644632] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.644972] pci_bus 0000:01: Allocating resources
>[ 4412.644985] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
>[ 4412.644989] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
>[ 4412.644992] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
>[ 4412.645005] pci_bus 0000:02: Allocating resources
>[ 4412.645223] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[ 4412.645236] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[ 4412.645240] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.645245] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645248] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645251] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645253] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645256] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645259] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
>[ 4412.645261] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[ 4412.645264] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[ 4412.645266] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
>[ 4412.645268] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
>[ 4412.645275] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfe00000-0xdfffffff]
>[ 4412.645284] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
>[ 4412.645290] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
>[ 4412.645294] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[ 4412.645297] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
>[ 4412.646003] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.646285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.646308] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.646379] acpi device:54: Cannot transition to power state D3cold for parent in (unknown)
>[ 4412.658735] PM: Syncing filesystems ... 
>[ 4412.662329] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.662470] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
>[ 4412.710900] done.
>[ 4412.710905] PM: Preparing system for mem sleep
>[ 4412.711316] Freezing user space processes ... (elapsed 0.024 seconds) done.
>[ 4412.736330] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[ 4412.737344] PM: Entering mem sleep
>[ 4412.737368] Suspending console(s) (use no_console_suspend to debug)
>[ 4412.737527] wlp2s0: deauthenticating from c4:ea:1d:ad:9a:fb by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 4412.753518] cfg80211: Calling CRDA to update world regulatory domain
>[ 4412.753839] sd 0:0:0:0: [sda] Stopping disk
>[ 4414.125163] PM: suspend of devices complete after 1386.804 msecs
>[ 4414.144246] PM: late suspend of devices complete after 19.066 msecs
>[ 4414.147136] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[ 4414.158271] PM: noirq suspend of devices complete after 14.014 msecs
>[ 4414.158664] ACPI: Preparing to enter system sleep state S3
>[ 4414.169793] ACPI : EC: EC stopped
>[ 4414.169793] PM: Saving platform NVS memory
>[ 4414.169814] Disabling non-boot CPUs ...
>[ 4414.169835] intel_pstate CPU 1 exiting
>[ 4414.169972] Broke affinity for irq 41
>[ 4414.170984] kvm: disabling virtualization on CPU1
>[ 4414.171000] smpboot: CPU 1 is now offline
>[ 4414.171323] intel_pstate CPU 2 exiting
>[ 4414.171437] Broke affinity for irq 40
>[ 4414.172451] kvm: disabling virtualization on CPU2
>[ 4414.172743] smpboot: CPU 2 is now offline
>[ 4414.173032] intel_pstate CPU 3 exiting
>[ 4414.174139] kvm: disabling virtualization on CPU3
>[ 4414.174144] smpboot: CPU 3 is now offline
>[ 4414.177269] ACPI: Low-level resume complete
>[ 4414.177373] ACPI : EC: EC started
>[ 4414.177374] PM: Restoring platform NVS memory
>[ 4414.177840] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d
>[ 4414.177959] Enabling non-boot CPUs ...
>[ 4414.178027] x86: Booting SMP configuration:
>[ 4414.178029] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[ 4414.191305] kvm: enabling virtualization on CPU1
>[ 4414.193673]  cache: parent cpu1 should not be sleeping
>[ 4414.193958] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
>[ 4414.199051] microcode: CPU1 updated to revision 0x1d, date = 2015-08-13
>[ 4414.199096] CPU1 is up
>[ 4414.199150] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[ 4414.212354] kvm: enabling virtualization on CPU2
>[ 4414.214653]  cache: parent cpu2 should not be sleeping
>[ 4414.214949] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
>[ 4414.218175] microcode: CPU2 updated to revision 0x1d, date = 2015-08-13
>[ 4414.218224] CPU2 is up
>[ 4414.218275] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[ 4414.231641] kvm: enabling virtualization on CPU3
>[ 4414.234021]  cache: parent cpu3 should not be sleeping
>[ 4414.234305] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d
>[ 4414.234333] CPU3 is up
>[ 4414.245584] ACPI: Waking up from system sleep state S3
>[ 4414.279826] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[ 4414.280160] PM: noirq resume of devices complete after 14.413 msecs
>[ 4414.282608] PM: early resume of devices complete after 2.406 msecs
>[ 4414.282872] usb usb1: root hub lost power or was reset
>[ 4414.282877] usb usb2: root hub lost power or was reset
>[ 4414.284409] rtc_cmos 00:02: System wakeup disabled by ACPI
>[ 4414.288021] sd 0:0:0:0: [sda] Starting disk
>[ 4414.589784] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[ 4414.591975] ata1.00: supports DRM functions and may not be fully accessible
>[ 4414.592175] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4414.592689] ata1.00: supports DRM functions and may not be fully accessible
>[ 4414.592849] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4414.592858] ata1.00: configured for UDMA/133
>[ 4414.606920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[ 4414.650945] usb 1-8: reset full-speed USB device number 6 using xhci_hcd
>[ 4414.968047] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
>[ 4415.168610] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[ 4415.169119] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[ 4415.366516] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[ 4415.367014] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[ 4415.399841] PM: resume of devices complete after 1116.548 msecs
>[ 4415.400301] PM: Finishing wakeup.
>[ 4415.400303] Restarting tasks ... done.
>[ 4415.410166] cfg80211: World regulatory domain updated:
>[ 4415.410172] cfg80211:  DFS Master region: unset
>[ 4415.410173] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 4415.410177] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 4415.410181] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 4415.410183] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[ 4415.410186] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 4415.410190] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 4415.410193] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[ 4415.410195] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[ 4415.410198] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[ 4415.410223] cfg80211: Calling CRDA for country: FR
>[ 4415.413070] Bluetooth: hci0: read Intel version: 370710018002030d00
>[ 4415.413076] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
>[ 4415.415500] cfg80211: Regulatory domain changed to country: FR
>[ 4415.415505] cfg80211:  DFS Master region: ETSI
>[ 4415.415507] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 4415.415511] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 4415.415515] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 4415.415518] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 4415.415521] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[ 4415.415524] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[ 4415.507297] usb 1-1: new low-speed USB device number 7 using xhci_hcd
>[ 4415.507330] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
>[ 4415.519191] usb 2-2: New USB device found, idVendor=174c, idProduct=1153
>[ 4415.519194] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 4415.519196] usb 2-2: Product: AS2115
>[ 4415.519198] usb 2-2: Manufacturer: ASMedia
>[ 4415.519200] usb 2-2: SerialNumber: 00000000000000000000
>[ 4415.520006] usb-storage 2-2:1.0: USB Mass Storage device detected
>[ 4415.520075] scsi host6: usb-storage 2-2:1.0
>[ 4415.527884] ata1.00: supports DRM functions and may not be fully accessible
>[ 4415.527926] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4415.528079] ata1.00: supports DRM functions and may not be fully accessible
>[ 4415.528121] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[ 4415.528128] ata1.00: configured for UDMA/133
>[ 4415.528138] ata1: EH complete
>[ 4415.542027] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
>[ 4415.545367] EXT4-fs (dm-1): re-mounted. Opts: commit=0
>[ 4415.575153] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[ 4415.674661] usb 1-1: New USB device found, idVendor=093a, idProduct=2510
>[ 4415.674667] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 4415.674670] usb 1-1: Product: USB Optical Mouse
>[ 4415.674673] usb 1-1: Manufacturer: PixArt
>[ 4415.674839] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[ 4415.676951] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0004/input/input29
>[ 4415.677105] hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
>[ 4415.829496] usb 1-7: new full-speed USB device number 8 using xhci_hcd
>[ 4416.002481] usb 1-7: New USB device found, idVendor=03eb, idProduct=8a31
>[ 4416.002485] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 4416.002487] usb 1-7: Product: Atmel maXTouch Digitizer
>[ 4416.002489] usb 1-7: Manufacturer: Atmel
>[ 4416.009861] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A31.0005/input/input30
>[ 4416.010053] hid-multitouch 0003:03EB:8A31.0005: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
>[ 4416.014777] hid-generic 0003:03EB:8A31.0006: hiddev0,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
>[ 4416.520274] scsi 6:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
>[ 4416.524792] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>[ 4416.525196] sd 6:0:0:0: [sdd] Write Protect is off
>[ 4416.525202] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
>[ 4416.525436] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[ 4416.589488]  sdd: sdd1 sdd2
>[ 4416.591436] sd 6:0:0:0: [sdd] Attached SCSI disk
>[ 4418.186293] wlp2s0: authenticate with 30:7e:cb:89:0d:dc
>[ 4418.191766] wlp2s0: send auth to 30:7e:cb:89:0d:dc (try 1/3)
>[ 4418.203815] wlp2s0: authenticated
>[ 4418.203928] wlp2s0: associate with 30:7e:cb:89:0d:dc (try 1/3)
>[ 4418.208093] wlp2s0: RX AssocResp from 30:7e:cb:89:0d:dc (capab=0x411 status=0 aid=1)
>[ 4418.209431] wlp2s0: associated
>[ 4434.355176] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[ 4677.188652] sd_festival[8944]: segfault at 2d0 ip 00007f85039e3860 sp 00007fff50ffa698 error 4 in libpthread-2.20.so[7f85039d6000+17000]
>[ 6884.389325] wlp2s0: deauthenticating from 30:7e:cb:89:0d:dc by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 6884.395188] cfg80211: Calling CRDA to update world regulatory domain
>[ 6884.395255] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
>[ 6884.402147] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
>[ 6884.402191] cfg80211: World regulatory domain updated:
>[ 6884.402195] cfg80211:  DFS Master region: unset
>[ 6884.402196] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 6884.402200] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6884.402204] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6884.402207] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6884.402210] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6884.402213] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 6884.402216] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[ 6884.402217] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6884.402219] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[ 6884.402242] cfg80211: Calling CRDA for country: FR
>[ 6884.404053] cfg80211: Regulatory domain changed to country: FR
>[ 6884.404056] cfg80211:  DFS Master region: ETSI
>[ 6884.404058] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 6884.404062] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6884.404065] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6884.404067] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 6884.404069] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[ 6884.404071] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[ 6884.404081] wlp2s0: authenticated
>[ 6884.404238] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
>[ 6884.408083] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
>[ 6884.409366] wlp2s0: associated
>[ 6917.249826] wlp2s0: deauthenticating from c4:ea:1d:ad:9a:fb by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 6917.271161] cfg80211: Calling CRDA to update world regulatory domain
>[ 6917.271494] wlp2s0: authenticate with 30:7e:cb:89:0d:dc
>[ 6917.276371] wlp2s0: send auth to 30:7e:cb:89:0d:dc (try 1/3)
>[ 6917.276422] cfg80211: World regulatory domain updated:
>[ 6917.276425] cfg80211:  DFS Master region: unset
>[ 6917.276427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 6917.276431] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6917.276435] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6917.276437] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6917.276440] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6917.276444] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 6917.276447] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[ 6917.276449] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6917.276452] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[ 6917.276463] cfg80211: Calling CRDA for country: FR
>[ 6917.278284] wlp2s0: authenticated
>[ 6917.278597] cfg80211: Regulatory domain changed to country: FR
>[ 6917.278599] cfg80211:  DFS Master region: ETSI
>[ 6917.278601] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[ 6917.278603] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[ 6917.278605] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[ 6917.278607] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[ 6917.278609] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[ 6917.278611] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[ 6917.279263] wlp2s0: associate with 30:7e:cb:89:0d:dc (try 1/3)
>[ 6917.283682] wlp2s0: RX AssocResp from 30:7e:cb:89:0d:dc (capab=0x411 status=0 aid=1)
>[ 6917.284525] wlp2s0: associated

ip route
default via 192.168.1.254 dev wlp2s0  metric 35 
169.254.0.0/16 dev wlp2s0  scope link  metric 35 
192.168.1.0/24 dev wlp2s0  proto kernel  scope link  src 192.168.1.67  metric 35 
================
iwconfig
wlp2s0    IEEE 802.11abgn  ESSID:"SFR_0DD8"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 30:7E:CB:89:0D:DC   
          Bit Rate=11 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=69/70  Signal level=-41 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1502   Missed beacon:0

================
iwlist scan
wlp2s0    Scan completed :
          Cell 01 - Address: 30:7E:CB:89:0D:DC
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=60/70  Signal level=-50 dBm  
                    Encryption key:on
                    ESSID:"SFR_0DD8"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000058b80f46b
                    Extra: Last beacon: 62ms ago
                    IE: Unknown: 00085346525F30444438
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1601000400000000000000000000000000000000000000
                    IE: Unknown: DD840050F204104A0001101044000102103B00010310470010000000000000000000000000000000001021000A4E42362D5345522D72321023000A4E42362D5345522D72321024000A4E42362D5345522D72321042000C3330374543423839304444381054000800060050F2040001101100085346525F30444438100800020084103C000101
                    IE: Unknown: DD090010180201F02C0000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 02 - Address: B2:7E:CB:89:0D:DD
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=60/70  Signal level=-50 dBm  
                    Encryption key:off
                    ESSID:"SFR WiFi FON"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000058b811d02
                    Extra: Last beacon: 62ms ago
                    IE: Unknown: 000C534652205769466920464F4E
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1601000000000000000000000000000000000000000000
                    IE: Unknown: DD090010180200F02C0000
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 03 - Address: B2:7E:CB:89:0D:DF
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    Quality=64/70  Signal level=-46 dBm  
                    Encryption key:on
                    ESSID:"SFR WiFi Mobile"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000058b80a9df
                    Extra: Last beacon: 62ms ago
                    IE: Unknown: 000F5346522057694669204D6F62696C65
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030101
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : 802.1x
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1AEC181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1601000000000000000000000000000000000000000000
                    IE: Unknown: DD090010180200F02C0000
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
          Cell 04 - Address: C4:EA:1D:AD:9A:FB
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=66/70  Signal level=-44 dBm  
                    Encryption key:on
                    ESSID:"TNCAPAD9AFB"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000005898a3121
                    Extra: Last beacon: 14ms ago
                    IE: Unknown: 000B544E434150414439414642
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A1C181BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D160B080000000000000000000000000000000000000000
                    IE: Unknown: DD9C0050F204104A0001101044000102103B000103104700107655C526B8AF56BF863FB23DFCD42C2A1021000B546563686E69636F6C6F721023000E4D6564696141636365737320544710240008373838766E20763210420009313534355241424E451054000800060050F2040001101100164D65646961416363657373205447373838766E207632100800020004103C0001011049000600372A000120
                    IE: Unknown: DD090010180200000C0000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00

===============
iw dev wlp2s0 scan
BSS c4:ea:1d:ad:9a:fb(on wlp2s0) -- associated
	TSF: 23815308635 usec (0d, 06:36:55)
	freq: 2462
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -44.00 dBm
	last seen: 0 ms ago
	Information elements from Probe Response frame:
	SSID: TNCAPAD9AFB
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 11
	ERP: <no flags>
	ERP D4.0: <no flags>
	RSN:	 * Version: 1
		 * Group cipher: TKIP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	HT capabilities:
		Capabilities: 0x181c
			HT20
			SM Power Save disabled
			RX Greenfield
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 11
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 1
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: 7655c526-b8af-56bf-863f-b23dfcd42c2a
		 * Manufacturer: Technicolor
		 * Model: MediaAccess TG
		 * Model Number: 788vn v2
		 * Serial Number: 1545RABNE
		 * Primary Device Type: 6-0050f204-1
		 * Device name: MediaAccess TG788vn v2
		 * Config methods: Label
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WPA:	 * Version: 1
		 * Group cipher: TKIP
		 * Pairwise ciphers: TKIP
		 * Authentication suites: PSK
	WMM:	 * Parameter version 1
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 30:7e:cb:89:0d:dc(on wlp2s0)
	TSF: 23848437740 usec (0d, 06:37:28)
	freq: 2437
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -43.00 dBm
	last seen: 0 ms ago
	SSID: SFR_0DD8
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 6
	ERP: <no flags>
	ERP D4.0: <no flags>
	Extended supported rates: 6.0 9.0 12.0 48.0 
	HT capabilities:
		Capabilities: 0x18ec
			HT20
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 6
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 0
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: 00000000-0000-0000-0000-000000000000
		 * Manufacturer: NB6-SER-r2
		 * Model: NB6-SER-r2
		 * Model Number: NB6-SER-r2
		 * Serial Number: 307ECB890DD8
		 * Primary Device Type: 6-0050f204-1
		 * Device name: SFR_0DD8
		 * Config methods: Label, PBC
		 * RF Bands: 0x1
	WPA:	 * Version: 1
		 * Group cipher: TKIP
		 * Pairwise ciphers: CCMP TKIP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS b2:7e:cb:89:0d:dd(on wlp2s0)
	TSF: 23848443209 usec (0d, 06:37:28)
	freq: 2437
	beacon interval: 100 TUs
	capability: ESS ShortSlotTime (0x0401)
	signal: -44.00 dBm
	last seen: 0 ms ago
	SSID: SFR WiFi FON
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 6
	ERP: <no flags>
	ERP D4.0: <no flags>
	Extended supported rates: 6.0 9.0 12.0 48.0 
	HT capabilities:
		Capabilities: 0x18ec
			HT20
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 6
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 0
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS b2:7e:cb:89:0d:df(on wlp2s0)
	TSF: 23848445200 usec (0d, 06:37:28)
	freq: 2437
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -44.00 dBm
	last seen: 0 ms ago
	Information elements from Probe Response frame:
	SSID: SFR WiFi Mobile
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 6
	ERP: <no flags>
	ERP D4.0: <no flags>
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: IEEE 802.1X
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	HT capabilities:
		Capabilities: 0x18ec
			HT20
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 6
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 0
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
===============
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.15-desktop-2.mga5 (iurt@sucuk.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jan 20 17:05:51 UTC 2016
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=c9a7e958-3a42-4686-b656-708b422161f4 ro splash quiet noiswmd
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca11efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca11f000-0x00000000ca125fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca126000-0x00000000ca9a7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca9a8000-0x00000000cac33fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cac34000-0x00000000da08afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da08b000-0x00000000da29cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da29d000-0x00000000da42efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da42f000-0x00000000dab19fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dab1a000-0x00000000daf53fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daf54000-0x00000000daffefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbc00000-0x00000000dfdfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031f1fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xda4b3000  ACPI 2.0=0xda4b3000  SMBIOS=0xdaf52318 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. UX303LA/UX303LA, BIOS UX303LA.204 09/01/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x31f200 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7F00000000 write-back
[    0.000000]   2 base 0300000000 mask 7FE0000000 write-back
[    0.000000]   3 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00DC000000 mask 7FFC000000 uncachable
[    0.000000]   5 base 00DBC00000 mask 7FFFC00000 uncachable
[    0.000000]   6 base 031F800000 mask 7FFF800000 uncachable
[    0.000000]   7 base 031F400000 mask 7FFFC00000 uncachable
[    0.000000]   8 base 031F200000 mask 7FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0xdbc00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02f4b000, 0x02f4bfff] PGTABLE
[    0.000000] BRK [0x02f4c000, 0x02f4cfff] PGTABLE
[    0.000000] BRK [0x02f4d000, 0x02f4dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x31f000000-0x31f1fffff]
[    0.000000]  [mem 0x31f000000-0x31f1fffff] page 2M
[    0.000000] BRK [0x02f4e000, 0x02f4efff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x300000000-0x31effffff]
[    0.000000]  [mem 0x300000000-0x31effffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2e0000000-0x2ffffffff]
[    0.000000]  [mem 0x2e0000000-0x2ffffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xca11efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xc9ffffff] page 2M
[    0.000000]  [mem 0xca000000-0xca11efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xca126000-0xca9a7fff]
[    0.000000]  [mem 0xca126000-0xca1fffff] page 4k
[    0.000000]  [mem 0xca200000-0xca7fffff] page 2M
[    0.000000]  [mem 0xca800000-0xca9a7fff] page 4k
[    0.000000] BRK [0x02f4f000, 0x02f4ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcac34000-0xda08afff]
[    0.000000]  [mem 0xcac34000-0xcadfffff] page 4k
[    0.000000]  [mem 0xcae00000-0xd9ffffff] page 2M
[    0.000000]  [mem 0xda000000-0xda08afff] page 4k
[    0.000000] BRK [0x02f50000, 0x02f50fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xda29d000-0xda42efff]
[    0.000000]  [mem 0xda29d000-0xda42efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff]
[    0.000000]  [mem 0xdafff000-0xdaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2dfffffff]
[    0.000000]  [mem 0x100000000-0x2dfffffff] page 1G
[    0.000000] RAMDISK: [mem 0x36e5c000-0x37725fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DA4B3000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000DA4B3098 0000AC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DA4C9C58 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DA4B3258 0169FD (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DAB18F80 000040
[    0.000000] ACPI: APIC 0x00000000DA4C9D68 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DA4C9DE0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000DA4C9E28 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: LPIT 0x00000000DA4C9EF0 000094 (v01 ALASKA          00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DA4C9F88 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DA4CA4C8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DA4CAFA0 0002DE (v01 PmRef  Cpu0Tst  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DA4CB280 000348 (v01 PmRef  ApTst    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000DA4CB5C8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DA4CB608 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[    0.000000] ACPI: HPET 0x00000000DA4CE678 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DA4CE6B0 0002D7 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DA4CE988 003F96 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000DA4D2920 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[    0.000000] ACPI: SSDT 0x00000000DA4D2958 0006EB (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[    0.000000] ACPI: MSDM 0x00000000DA29AE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f1fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x31f1f5000-0x31f1f9fff]
[    0.000000]  [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312800000-ffff88031e7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031f1fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ca11efff]
[    0.000000]   node   0: [mem 0x00000000ca126000-0x00000000ca9a7fff]
[    0.000000]   node   0: [mem 0x00000000cac34000-0x00000000da08afff]
[    0.000000]   node   0: [mem 0x00000000da29d000-0x00000000da42efff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031f1fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f1fffff]
[    0.000000] On node 0 totalpages: 3117351
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13887 pages used for memmap
[    0.000000]   DMA32 zone: 888715 pages, LIFO batch:31
[    0.000000]   Normal zone: 34760 pages used for memmap
[    0.000000]   Normal zone: 2224640 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdbe00000-0xdfdfffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xca11f000-0xca125fff]
[    0.000000] PM: Registered nosave memory: [mem 0xca9a8000-0xcac33fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda08b000-0xda29cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xda42f000-0xdab19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdab1a000-0xdaf53fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf54000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdbbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbc00000-0xdfdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88031ee00000 s99224 r8192 d31848 u524288
[    0.000000] pcpu-alloc: s99224 r8192 d31848 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3068618
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=c9a7e958-3a42-4686-b656-708b422161f4 ro splash quiet noiswmd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12140712K/12469404K available (7129K kernel code, 1177K rwdata, 3428K rodata, 1340K init, 816K bss, 328692K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:728 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.942 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.88 BogoMIPS (lpj=2593942)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20150410
[    0.029135] ACPI: All ACPI Tables successfully acquired
[    0.030102] Security Framework initialized
[    0.030110] TOMOYO Linux initialized
[    0.031289] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.035078] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.036634] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.036655] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.036906] Initializing cgroup subsys blkio
[    0.036909] Initializing cgroup subsys devices
[    0.036911] Initializing cgroup subsys freezer
[    0.036914] Initializing cgroup subsys net_cls
[    0.036937] CPU: Physical Processor ID: 0
[    0.036938] CPU: Processor Core ID: 0
[    0.036943] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.036944] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.038041] mce: CPU supports 7 MCE banks
[    0.038054] CPU0: Thermal monitoring enabled (TM1)
[    0.038064] process: using mwait in idle threads
[    0.038067] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.038068] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.038481] Freeing SMP alternatives memory: 24K (ffffffff81e77000 - ffffffff81e7d000)
[    0.041845] ftrace: allocating 26396 entries in 104 pages
[    0.055360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.065373] TSC deadline timer enabled
[    0.065376] smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[    0.065402] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.065424] ... version:                3
[    0.065425] ... bit width:              48
[    0.065426] ... generic registers:      4
[    0.065427] ... value mask:             0000ffffffffffff
[    0.065428] ... max period:             0000ffffffffffff
[    0.065429] ... fixed-purpose events:   3
[    0.065430] ... event mask:             000000070000000f
[    0.066029] x86: Booting SMP configuration:
[    0.066031] .... node  #0, CPUs:      #1 #2 #3
[    0.109221] x86: Booted up 1 node, 4 CPUs
[    0.109224] smpboot: Total of 4 processors activated (20751.53 BogoMIPS)
[    0.114390] devtmpfs: initialized
[    0.117624] PM: Registering ACPI NVS region [mem 0xca11f000-0xca125fff] (28672 bytes)
[    0.117626] PM: Registering ACPI NVS region [mem 0xda42f000-0xdab19fff] (7254016 bytes)
[    0.117797] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.117875] xor: automatically using best checksumming function:
[    0.127236]    avx       : 26956.000 MB/sec
[    0.127246] pinctrl core: initialized pinctrl subsystem
[    0.127341] RTC time:  7:19:17, date: 01/13/17
[    0.127463] NET: Registered protocol family 16
[    0.132263] cpuidle: using governor ladder
[    0.138280] cpuidle: using governor menu
[    0.138334] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.138336] ACPI: bus type PCI registered
[    0.138337] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.138413] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.138416] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.138514] PCI: Using configuration type 1 for base access
[    0.138785] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.161337] raid6: sse2x1   gen()  6125 MB/s
[    0.178368] raid6: sse2x1   xor()  4791 MB/s
[    0.195402] raid6: sse2x2   gen()  7691 MB/s
[    0.212430] raid6: sse2x2   xor()  5464 MB/s
[    0.229469] raid6: sse2x4   gen()  9003 MB/s
[    0.246498] raid6: sse2x4   xor()  6228 MB/s
[    0.263530] raid6: avx2x1   gen() 12011 MB/s
[    0.280565] raid6: avx2x2   gen() 13816 MB/s
[    0.297597] raid6: avx2x4   gen() 16273 MB/s
[    0.297599] raid6: using algorithm avx2x4 gen() 16273 MB/s
[    0.297600] raid6: using avx2x2 recovery algorithm
[    0.297699] ACPI: Added _OSI(Module Device)
[    0.297701] ACPI: Added _OSI(Processor Device)
[    0.297702] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.297704] ACPI: Added _OSI(Processor Aggregator Device)
[    0.300864] ACPI : EC: EC description table is found, configuring boot EC
[    0.300878] ACPI : EC: EC started
[    0.304125] ACPI: Executed 1 blocks of module-level executable AML code
[    0.308048] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.310103] ACPI: Dynamic OEM Table Load:
[    0.310111] ACPI: SSDT 0xFFFF880310560800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.311150] ACPI: Dynamic OEM Table Load:
[    0.311157] ACPI: SSDT 0xFFFF880310493000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.312242] ACPI: Dynamic OEM Table Load:
[    0.312247] ACPI: SSDT 0xFFFF8803104F1A00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.313945] ACPI: Interpreter enabled
[    0.313956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.313963] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.313986] ACPI: (supports S0 S3 S4 S5)
[    0.313988] ACPI: Using IOAPIC for interrupt routing
[    0.314017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.327149] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.327155] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.327406] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.327617] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.327619] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.327976] PCI host bridge to bus 0000:00
[    0.327979] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.327982] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.327983] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.327985] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.327987] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.327989] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.327990] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.327992] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.327993] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.327995] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.327996] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.327998] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.328000] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff window]
[    0.328007] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.328112] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.328124] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.328132] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.328137] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.328228] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.328237] pci 0000:00:03.0: reg 0x10: [mem 0xf7d1c000-0xf7d1ffff 64bit]
[    0.328336] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[    0.328347] pci 0000:00:04.0: reg 0x10: [mem 0xf7d10000-0xf7d17fff 64bit]
[    0.328464] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.328480] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.328535] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.328583] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.328619] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.328638] pci 0000:00:16.0: reg 0x10: [mem 0xf7d24000-0xf7d2401f 64bit]
[    0.328706] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.328794] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.328810] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d18000-0xf7d1bfff 64bit]
[    0.328872] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.328924] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.328963] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[    0.329030] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.329122] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.329164] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[    0.329235] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.329324] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.329370] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.329553] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.329566] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.329574] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.329581] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.329589] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.329596] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.329604] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d22000-0xf7d227ff]
[    0.329635] pci 0000:00:1f.2: PME# supported from D3hot
[    0.329717] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.329731] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d21000-0xf7d210ff 64bit]
[    0.329751] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.329848] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[    0.329876] pci 0000:00:1f.6: reg 0x10: [mem 0xf7d20000-0xf7d20fff 64bit]
[    0.330113] acpiphp: Slot [1] registered
[    0.330120] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.330405] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[    0.330492] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.330819] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.330856] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.332854] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.332859] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.333909] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[    0.333961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334058] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334106] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334202] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.334590] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.334671] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.334771] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.334773] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.334775] vgaarb: loaded
[    0.334776] vgaarb: bridge control possible 0000:00:02.0
[    0.334968] SCSI subsystem initialized
[    0.335006] libata version 3.00 loaded.
[    0.335173] PCI: Using ACPI for IRQ routing
[    0.336561] PCI: pci_cache_line_size set to 64 bytes
[    0.336875] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.336877] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.336878] e820: reserve RAM buffer [mem 0xca11f000-0xcbffffff]
[    0.336879] e820: reserve RAM buffer [mem 0xca9a8000-0xcbffffff]
[    0.336881] e820: reserve RAM buffer [mem 0xda08b000-0xdbffffff]
[    0.336883] e820: reserve RAM buffer [mem 0xda42f000-0xdbffffff]
[    0.336884] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.336886] e820: reserve RAM buffer [mem 0x31f200000-0x31fffffff]
[    0.336991] NetLabel: Initializing
[    0.336992] NetLabel:  domain hash size = 128
[    0.336993] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.337005] NetLabel:  unlabeled traffic allowed by default
[    0.337042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.337048] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.339076] Switched to clocksource hpet
[    0.345300] pnp: PnP ACPI init
[    0.345400] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.345405] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.345624] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.345626] system 00:01: [io  0xffff] has been reserved
[    0.345628] system 00:01: [io  0xffff] has been reserved
[    0.345630] system 00:01: [io  0xffff] has been reserved
[    0.345632] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.345633] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.345636] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.345638] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.345640] system 00:01: [io  0x1800-0x18fe] could not be reserved
[    0.345642] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.345645] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345672] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.345718] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.345720] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.345762] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.345765] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345793] system 00:05: [io  0x0240-0x0259] has been reserved
[    0.345795] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.345851] pnp 00:06: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.345889] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.346220] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346471] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.346473] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.346475] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.346478] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.346480] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.346482] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.346484] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.346486] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.346488] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.346490] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.346492] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.346494] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.346496] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346567] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.346913] pnp: PnP ACPI: found 11 devices
[    0.353111] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.353138] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.353151] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.353156] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.353166] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.353168] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.353170] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.353171] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.353173] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.353174] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.353176] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.353178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.353179] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.353181] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.353183] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.353184] pci_bus 0000:00: resource 15 [mem 0xdfe00000-0xfeafffff window]
[    0.353187] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.353218] NET: Registered protocol family 2
[    0.353449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.353683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.353816] TCP: Hash tables configured (established 131072 bind 65536)
[    0.353852] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.353906] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.353978] NET: Registered protocol family 1
[    0.353995] pci 0000:00:02.0: Video device with shadowed ROM
[    0.354337] PCI: CLS 64 bytes, default 64
[    0.354385] Trying to unpack rootfs image as initramfs...
[    0.464819] Freeing initrd memory: 9000K (ffff880036e5c000 - ffff880037726000)
[    0.464841] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.464844] software IO TLB [mem 0xd373b000-0xd773b000] (64MB) mapped at [ffff8800d373b000-ffff8800d773afff]
[    0.464903] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.464904] hw unit of domain pp0-core 2^-14 Joules
[    0.464905] hw unit of domain package 2^-14 Joules
[    0.464906] hw unit of domain dram 2^-14 Joules
[    0.464907] hw unit of domain pp1-gpu 2^-14 Joules
[    0.465283] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.465314] audit: initializing netlink subsys (disabled)
[    0.465327] audit: type=2000 audit(1484291957.449:1): initialized
[    0.465681] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.465683] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.467203] zpool: loaded
[    0.467206] zbud: loaded
[    0.467379] VFS: Disk quotas dquot_6.6.0
[    0.467414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.468022] bounce: pool size: 64 pages
[    0.468055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.468089] io scheduler noop registered
[    0.468093] io scheduler deadline registered
[    0.468124] io scheduler cfq registered (default)
[    0.468485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.468501] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.468550] efifb: probing for efifb
[    0.468572] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[    0.468573] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.468574] efifb: scrolling: redraw
[    0.468576] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.473577] Console: switching to colour frame buffer device 240x67
[    0.478480] fb0: EFI VGA frame buffer device
[    0.478490] intel_idle: MWAIT substates: 0x11142120
[    0.478491] intel_idle: v0.4 model 0x45
[    0.478492] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.478767] GHES: HEST is not enabled!
[    0.478839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.479276] Linux agpgart interface v0.103
[    0.480962] brd: module loaded
[    0.481115] ahci 0000:00:1f.2: version 3.0
[    0.481258] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.492247] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    0.492252] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
[    0.492917] scsi host0: ahci
[    0.493262] scsi host1: ahci
[    0.493470] scsi host2: ahci
[    0.493664] scsi host3: ahci
[    0.493715] ata1: SATA max UDMA/133 abar m2048@0xf7d22000 port 0xf7d22100 irq 40
[    0.493717] ata2: DUMMY
[    0.493718] ata3: DUMMY
[    0.493719] ata4: DUMMY
[    0.493818] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.496810] i8042: Detected active multiplexing controller, rev 1.1
[    0.498301] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.498306] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.498314] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.498316] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.498318] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.498533] mousedev: PS/2 mouse device common for all mice
[    0.498620] rtc_cmos 00:02: RTC can wake from S4
[    0.498753] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.498783] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.498800] Intel P-state driver initializing.
[    0.498929] ledtrig-cpu: registered to indicate activity on CPUs
[    0.498932] EFI Variables Facility v0.08 2004-May-17
[    0.501291] Key type dns_resolver registered
[    0.501294] mpls_gso: MPLS GSO support
[    0.501712] registered taskstats version 1
[    0.502031] Btrfs loaded
[    0.502520]   Magic number: 1:955:318
[    0.502542] tty tty43: hash matches
[    0.502560] acpi ELAN1000:00: hash matches
[    0.502631] rtc_cmos 00:02: setting system clock to 2017-01-13 07:19:18 UTC (1484291958)
[    0.502665] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.502665] EDD information not available.
[    0.502735] PM: Hibernation image not present or could not be loaded.
[    0.538649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.777749] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input8
[    0.798429] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.798723] ata1.00: supports DRM functions and may not be fully accessible
[    0.798834] ata1.00: READ LOG DMA EXT failed, trying unqueued
[    0.798889] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.798891] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
[    0.798893] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.799217] ata1.00: supports DRM functions and may not be fully accessible
[    0.799272] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.799276] ata1.00: configured for UDMA/133
[    0.799458] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  CB6Q PQ: 0 ANSI: 5
[    0.799778] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.799909] sd 0:0:0:0: [sda] Write Protect is off
[    0.799913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.799958] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.812458]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    0.813053] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.813305] Freeing unused kernel memory: 1340K (ffffffff81d28000 - ffffffff81e77000)
[    0.813307] Write protecting the kernel read-only data: 12288k
[    0.813629] Freeing unused kernel memory: 1052K (ffff8800026f9000 - ffff880002800000)
[    0.813779] Freeing unused kernel memory: 668K (ffff880002b59000 - ffff880002c00000)
[    0.849968] dracut: dracut-038
[    0.917642] random: systemd-udevd urandom read with 5 bits of entropy available
[    0.946063] [drm] Initialized drm 1.1.0 20060810
[    0.953021] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
[    0.953854] ACPI: Lid Switch [LID]
[    0.953900] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[    0.953904] ACPI: Sleep Button [SLPB]
[    0.953948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[    0.953951] ACPI: Power Button [PWRF]
[    0.989719] [drm] Memory usable by graphics device = 2048M
[    0.989722] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    0.989723] fb: switching to inteldrmfb from EFI VGA
[    0.989739] Console: switching to colour dummy device 80x25
[    0.989817] [drm] Replacing VGA console driver
[    0.995630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.995633] [drm] Driver supports precise vblank timestamp query.
[    0.995712] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.012449] fbcon: inteldrmfb (fb0) is primary device
[    1.013454] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.015689] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    1.015723] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    1.464851] tsc: Refined TSC clocksource calibration: 2593.998 MHz
[    1.464854] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2564164249b, max_idle_ns: 440795293190 ns
[    2.282172] Console: switching to colour frame buffer device 240x67
[    2.287130] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.287132] i915 0000:00:02.0: registered panic notifier
[    2.294208] dracut: Starting plymouth daemon
[    2.465462] Switched to clocksource tsc
[    3.116636] sdhci: Secure Digital Host Controller Interface driver
[    3.116638] sdhci: Copyright(c) Pierre Ossman
[    3.134156] ACPI: bus type USB registered
[    3.134187] usbcore: registered new interface driver usbfs
[    3.134200] usbcore: registered new interface driver hub
[    3.134225] usbcore: registered new device driver usb
[    3.144043] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.144050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.145134] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    3.145142] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.145225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.145227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.145229] usb usb1: Product: xHCI Host Controller
[    3.145231] usb usb1: Manufacturer: Linux 4.1.15-desktop-2.mga5 xhci-hcd
[    3.145233] usb usb1: SerialNumber: 0000:00:14.0
[    3.145339] hub 1-0:1.0: USB hub found
[    3.145349] hub 1-0:1.0: 9 ports detected
[    3.145462] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.145465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.145488] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.145489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.145490] usb usb2: Product: xHCI Host Controller
[    3.145492] usb usb2: Manufacturer: Linux 4.1.15-desktop-2.mga5 xhci-hcd
[    3.145492] usb usb2: SerialNumber: 0000:00:14.0
[    3.145562] hub 2-0:1.0: USB hub found
[    3.145570] hub 2-0:1.0: 4 ports detected
[    3.347113] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    3.359581] usb 2-2: New USB device found, idVendor=174c, idProduct=1153
[    3.359585] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    3.359587] usb 2-2: Product: AS2115
[    3.359588] usb 2-2: Manufacturer: ASMedia
[    3.359590] usb 2-2: SerialNumber: 00000000000000000000
[    3.498094] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    3.653606] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.665392] usb 1-1: New USB device found, idVendor=093a, idProduct=2510
[    3.665395] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.665398] usb 1-1: Product: USB Optical Mouse
[    3.665400] usb 1-1: Manufacturer: PixArt
[    3.665502] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.671594] hidraw: raw HID events driver (C) Jiri Kosina
[    3.676024] usbcore: registered new interface driver usbhid
[    3.676027] usbhid: USB HID core driver
[    3.676697] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input13
[    3.676769] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    3.694575] dracut: Checking ext4: /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4
[    3.694714] dracut: issuing e2fsck -a  /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4
[    3.723880] dracut: /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4: clean, 560172/1574880 files, 5341348/6294784 blocks
[    3.725120] dracut: Mounting /dev/disk/by-uuid/c9a7e958-3a42-4686-b656-708b422161f4 with -o noatime,acl,ro
[    3.741191] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[    3.784080] dracut: Mounted root filesystem /dev/sda6
[    3.828236] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    3.845206] dracut: Switching root
[    3.857083] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    3.997828] usb 1-3: New USB device found, idVendor=05dc, idProduct=a838
[    3.997830] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.997831] usb 1-3: Product: USB Flash Drive
[    3.997833] usb 1-3: Manufacturer: Lexar
[    3.997834] usb 1-3: SerialNumber: AAM29EHK60BE4U10
[    4.151440] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    4.354418] usb 1-5: New USB device found, idVendor=064e, idProduct=9700
[    4.354420] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.354422] usb 1-5: Product: USB2.0 UVC HD Webcam
[    4.354423] usb 1-5: Manufacturer: SuYin
[    4.354424] usb 1-5: SerialNumber: HF1019-T838-SN03-Rev0101
[    4.511692] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    4.684784] usb 1-7: New USB device found, idVendor=03eb, idProduct=8a31
[    4.684788] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.684790] usb 1-7: Product: Atmel maXTouch Digitizer
[    4.684792] usb 1-7: Manufacturer: Atmel
[    4.694877] hid-generic 0003:03EB:8A31.0003: hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
[    4.847877] usb 1-8: new full-speed USB device number 6 using xhci_hcd
[    5.013265] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc
[    5.013269] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.061883] NET: Registered protocol family 10
[    5.460624] RPC: Registered named UNIX socket transport module.
[    5.460627] RPC: Registered udp transport module.
[    5.460628] RPC: Registered tcp transport module.
[    5.460629] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.572617] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.599242] Non-volatile memory driver v1.3
[    5.645586] EXT4-fs (sda6): re-mounted. Opts: acl
[    5.657247] systemd-journald[433]: Received request to flush runtime journal from PID 1
[    6.395006] ACPI: AC Adapter [AC0] (on-line)
[    6.434624] thermal LNXTHERM:00: registered as thermal_zone2
[    6.434628] ACPI: Thermal Zone [THRM] (34 C)
[    6.438396] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.445069] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150410/utaddress-254)
[    6.445077] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[    6.445082] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.481132] wmi: Mapper loaded
[    6.486259] ACPI: Battery Slot [BAT0] (battery present)
[    6.510495] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[    6.518177] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[    6.519942] microcode: CPU0 updated to revision 0x1d, date = 2015-08-13
[    6.520766] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[    6.520804] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[    6.521765] microcode: CPU1 updated to revision 0x1d, date = 2015-08-13
[    6.521774] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[    6.521801] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[    6.522761] microcode: CPU2 updated to revision 0x1d, date = 2015-08-13
[    6.522776] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[    6.522803] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[    6.523766] microcode: CPU3 updated to revision 0x1d, date = 2015-08-13
[    6.523873] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.548482] AVX2 version of gcm_enc/dec engaged.
[    6.548484] AES CTR mode by8 optimization enabled
[    6.550490] iTCO_vendor_support: vendor-support=0
[    6.559334] cfg80211: Calling CRDA to update world regulatory domain
[    6.644969] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.645009] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    6.645099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[    6.668639] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.720614] asus_wmi: ASUS WMI generic driver loaded
[    6.722972] Intel(R) Wireless WiFi driver for Linux
[    6.722974] Copyright(c) 2003- 2015 Intel Corporation
[    6.728364] asus_wmi: Initialization: 0x1
[    6.728417] asus_wmi: BIOS WMI version: 7.9
[    6.728492] asus_wmi: SFUN value: 0x4a2877
[    6.729220] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[    6.729409] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[    6.729521] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    6.729523] snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.729525] snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[    6.729527] snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
[    6.729529] snd_hda_codec_conexant hdaudioC1D0:    inputs:
[    6.729531] snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
[    6.729533] snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
[    6.730889] snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
[    6.736939] iwlwifi 0000:02:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
[    6.737014] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    6.737183] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    6.737917] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    6.739885] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    6.739962] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    6.740038] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    6.745950] asus_wmi: Backlight controlled by ACPI video driver
[    7.147329] cfg80211: World regulatory domain updated:
[    7.147333] cfg80211:  DFS Master region: unset
[    7.147334] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.147337] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.147339] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.147340] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    7.147342] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.147344] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.147346] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    7.147347] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    7.147349] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    7.182079] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[    7.182462] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    7.182961] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    7.206340] intel_rapl: Found RAPL domain package
[    7.206344] intel_rapl: Found RAPL domain core
[    7.206347] intel_rapl: Found RAPL domain uncore
[    7.206349] intel_rapl: Found RAPL domain dram
[    7.208584] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A31.0002/input/input21
[    7.208686] hid-multitouch 0003:03EB:8A31.0002: input,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
[    7.243060] usb-storage 2-2:1.0: USB Mass Storage device detected
[    7.243462] scsi host4: usb-storage 2-2:1.0
[    7.243846] usb-storage 1-3:1.0: USB Mass Storage device detected
[    7.243895] scsi host5: usb-storage 1-3:1.0
[    7.243993] usbcore: registered new interface driver usb-storage
[    7.244026] media: Linux media interface: v0.10
[    7.261373] Bluetooth: Core ver 2.20
[    7.261384] NET: Registered protocol family 31
[    7.261385] Bluetooth: HCI device and connection manager initialized
[    7.261387] Bluetooth: HCI socket layer initialized
[    7.261389] Bluetooth: L2CAP socket layer initialized
[    7.261392] Bluetooth: SCO socket layer initialized
[    7.266764] Linux video capture interface: v2.00
[    7.312924] usbcore: registered new interface driver btusb
[    7.325270] Bluetooth: hci0: read Intel version: 370710018002030d00
[    7.325602] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[    7.331859] device-mapper: uevent: version 1.0.3
[    7.331934] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[    7.332681] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
[    7.336861] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input22
[    7.336930] usbcore: registered new interface driver uvcvideo
[    7.336932] USB Video Class driver (1.1.1)
[    7.353345] ata1.00: supports DRM functions and may not be fully accessible
[    7.353388] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.353534] ata1.00: supports DRM functions and may not be fully accessible
[    7.353568] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.353571] ata1.00: configured for UDMA/133
[    7.353579] ata1: EH complete
[    7.361693] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
[    7.367666] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    7.394841] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.419105] cfg80211: Calling CRDA for country: FR
[    7.420696] cfg80211: Regulatory domain changed to country: FR
[    7.420699] cfg80211:  DFS Master region: ETSI
[    7.420701] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    7.420703] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    7.420705] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    7.420708] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    7.420710] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    7.420711] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    7.454365] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    7.492137] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    7.494376] random: nonblocking pool is initialized
[    7.629935] ata1.00: supports DRM functions and may not be fully accessible
[    7.630000] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.630147] ata1.00: supports DRM functions and may not be fully accessible
[    7.630178] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.630181] ata1.00: configured for UDMA/133
[    7.630189] ata1: EH complete
[    7.640764] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
[    8.244410] scsi 4:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[    8.244738] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    8.244980] sd 4:0:0:0: [sdb] Write Protect is off
[    8.244984] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.245225] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.104938] scsi 5:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 6
[    9.106058] sd 5:0:0:0: [sdc] 62517248 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    9.106784] sd 5:0:0:0: [sdc] Write Protect is off
[    9.106788] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    9.107474] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.113854]  sdc: sdc1
[    9.116348] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    9.832133]  sdb: sdb1 sdb2
[    9.833066] sd 4:0:0:0: [sdb] Attached SCSI disk
[   95.514456] NET: Registered protocol family 38
[   95.819355] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  101.526011] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  101.526014] Bluetooth: BNEP filters: protocol multicast
[  101.526018] Bluetooth: BNEP socket layer initialized
[  104.729717] usbcore: registered new interface driver r8152
[  105.519948] PPP generic driver version 2.4.2
[  105.816868] vboxdrv: Found 4 processor cores
[  105.833005] vboxdrv: TSC mode is Invariant, tentative frequency 2593980308 Hz
[  105.833008] vboxdrv: Successfully loaded version 5.0.16_OSE (interface 0x00240000)
[  105.835645] VBoxNetFlt: Successfully started.
[  105.837149] VBoxNetAdp: Successfully started.
[  106.023600] Process accounting resumed
[  106.075894] NFSD: starting 90-second grace period (net ffffffff81ce7100)
[  106.089486] ip_tables: (C) 2000-2006 Netfilter Core Team
[  107.010348] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  107.058486] Netfilter messages via NETLINK v0.30.
[  107.062390] ctnetlink v0.93: registering with nfnetlink.
[  107.348134] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  108.073906] ip_set: protocol 6
[  108.098798] netfilter PSD loaded - (c) astaro AG
[  108.100043] IFWLOG: register target
[  108.276462] fuse init (API version 7.23)
[  131.993134] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  131.993741] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  132.191595] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  132.192156] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  132.216108] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  187.395901] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.396710] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.591173] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.592078] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.615990] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  187.626025] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.626703] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.827846] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.828347] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[  187.849073] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  187.923068] NET: Registered protocol family 17
[  190.536571] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
[  190.544778] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
[  190.558058] wlp2s0: authenticated
[  190.558293] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
[  190.562013] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
[  190.563694] wlp2s0: associated
[  190.563721] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  261.019315] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  302.712356] Adjusting tsc more than 11% (5419175 vs 7179153)
[ 3567.277669] cfg80211: Calling CRDA to update world regulatory domain
[ 3567.279692] cfg80211: World regulatory domain updated:
[ 3567.279696] cfg80211:  DFS Master region: unset
[ 3567.279697] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3567.279699] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3567.279701] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3567.279703] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3567.279705] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3567.279707] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3567.279708] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3567.279709] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3567.279711] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3567.279839] cfg80211: Calling CRDA for country: FR
[ 3567.280996] cfg80211: Regulatory domain changed to country: FR
[ 3567.280998] cfg80211:  DFS Master region: ETSI
[ 3567.280999] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3567.281000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3567.281003] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3567.281004] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3567.281005] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 3567.281006] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 3570.058543] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
[ 3570.064196] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
[ 3570.066289] wlp2s0: authenticated
[ 3570.067344] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
[ 3570.070971] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
[ 3570.073186] wlp2s0: associated
[ 4378.297783] usb 1-1: USB disconnect, device number 2
[ 4404.245143] usb 2-2: USB disconnect, device number 2
[ 4404.250427] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 4404.250462] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4407.561028] usb 1-3: USB disconnect, device number 3
[ 4407.561330] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[ 4407.561360] sd 5:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 4409.645419] ata1.00: supports DRM functions and may not be fully accessible
[ 4409.645611] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4409.645841] ata1.00: supports DRM functions and may not be fully accessible
[ 4409.645906] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4409.645909] ata1.00: configured for UDMA/133
[ 4409.645917] ata1: EH complete
[ 4409.645987] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4409.673540] EXT4-fs (sda6): re-mounted. Opts: acl,commit=600
[ 4409.730233] EXT4-fs (dm-1): re-mounted. Opts: commit=600
[ 4412.616318] usb 1-7: USB disconnect, device number 5
[ 4412.644632] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.644972] pci_bus 0000:01: Allocating resources
[ 4412.644985] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[ 4412.644989] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 4412.644992] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 4412.645005] pci_bus 0000:02: Allocating resources
[ 4412.645223] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 4412.645236] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 4412.645240] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.645245] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645248] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645251] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645253] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645256] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645259] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 4412.645261] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 4412.645264] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 4412.645266] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 4412.645268] pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 4412.645275] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfe00000-0xdfffffff]
[ 4412.645284] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 4412.645290] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 4412.645294] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[ 4412.645297] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[ 4412.646003] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.646285] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.646308] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.646379] acpi device:54: Cannot transition to power state D3cold for parent in (unknown)
[ 4412.658735] PM: Syncing filesystems ... 
[ 4412.662329] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.662470] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4412.710900] done.
[ 4412.710905] PM: Preparing system for mem sleep
[ 4412.711316] Freezing user space processes ... (elapsed 0.024 seconds) done.
[ 4412.736330] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4412.737344] PM: Entering mem sleep
[ 4412.737368] Suspending console(s) (use no_console_suspend to debug)
[ 4412.737527] wlp2s0: deauthenticating from c4:ea:1d:ad:9a:fb by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4412.753518] cfg80211: Calling CRDA to update world regulatory domain
[ 4412.753839] sd 0:0:0:0: [sda] Stopping disk
[ 4414.125163] PM: suspend of devices complete after 1386.804 msecs
[ 4414.144246] PM: late suspend of devices complete after 19.066 msecs
[ 4414.147136] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4414.158271] PM: noirq suspend of devices complete after 14.014 msecs
[ 4414.158664] ACPI: Preparing to enter system sleep state S3
[ 4414.169793] ACPI : EC: EC stopped
[ 4414.169793] PM: Saving platform NVS memory
[ 4414.169814] Disabling non-boot CPUs ...
[ 4414.169835] intel_pstate CPU 1 exiting
[ 4414.169972] Broke affinity for irq 41
[ 4414.170984] kvm: disabling virtualization on CPU1
[ 4414.171000] smpboot: CPU 1 is now offline
[ 4414.171323] intel_pstate CPU 2 exiting
[ 4414.171437] Broke affinity for irq 40
[ 4414.172451] kvm: disabling virtualization on CPU2
[ 4414.172743] smpboot: CPU 2 is now offline
[ 4414.173032] intel_pstate CPU 3 exiting
[ 4414.174139] kvm: disabling virtualization on CPU3
[ 4414.174144] smpboot: CPU 3 is now offline
[ 4414.177269] ACPI: Low-level resume complete
[ 4414.177373] ACPI : EC: EC started
[ 4414.177374] PM: Restoring platform NVS memory
[ 4414.177840] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1d
[ 4414.177959] Enabling non-boot CPUs ...
[ 4414.178027] x86: Booting SMP configuration:
[ 4414.178029] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4414.191305] kvm: enabling virtualization on CPU1
[ 4414.193673]  cache: parent cpu1 should not be sleeping
[ 4414.193958] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 4414.199051] microcode: CPU1 updated to revision 0x1d, date = 2015-08-13
[ 4414.199096] CPU1 is up
[ 4414.199150] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4414.212354] kvm: enabling virtualization on CPU2
[ 4414.214653]  cache: parent cpu2 should not be sleeping
[ 4414.214949] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 4414.218175] microcode: CPU2 updated to revision 0x1d, date = 2015-08-13
[ 4414.218224] CPU2 is up
[ 4414.218275] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4414.231641] kvm: enabling virtualization on CPU3
[ 4414.234021]  cache: parent cpu3 should not be sleeping
[ 4414.234305] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1d
[ 4414.234333] CPU3 is up
[ 4414.245584] ACPI: Waking up from system sleep state S3
[ 4414.279826] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4414.280160] PM: noirq resume of devices complete after 14.413 msecs
[ 4414.282608] PM: early resume of devices complete after 2.406 msecs
[ 4414.282872] usb usb1: root hub lost power or was reset
[ 4414.282877] usb usb2: root hub lost power or was reset
[ 4414.284409] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 4414.288021] sd 0:0:0:0: [sda] Starting disk
[ 4414.589784] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4414.591975] ata1.00: supports DRM functions and may not be fully accessible
[ 4414.592175] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4414.592689] ata1.00: supports DRM functions and may not be fully accessible
[ 4414.592849] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4414.592858] ata1.00: configured for UDMA/133
[ 4414.606920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4414.650945] usb 1-8: reset full-speed USB device number 6 using xhci_hcd
[ 4414.968047] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[ 4415.168610] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4415.169119] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4415.366516] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4415.367014] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4415.399841] PM: resume of devices complete after 1116.548 msecs
[ 4415.400301] PM: Finishing wakeup.
[ 4415.400303] Restarting tasks ... done.
[ 4415.410166] cfg80211: World regulatory domain updated:
[ 4415.410172] cfg80211:  DFS Master region: unset
[ 4415.410173] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4415.410177] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4415.410181] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4415.410183] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4415.410186] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4415.410190] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4415.410193] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4415.410195] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4415.410198] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4415.410223] cfg80211: Calling CRDA for country: FR
[ 4415.413070] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4415.413076] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4415.415500] cfg80211: Regulatory domain changed to country: FR
[ 4415.415505] cfg80211:  DFS Master region: ETSI
[ 4415.415507] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4415.415511] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4415.415515] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4415.415518] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4415.415521] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 4415.415524] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 4415.507297] usb 1-1: new low-speed USB device number 7 using xhci_hcd
[ 4415.507330] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 4415.519191] usb 2-2: New USB device found, idVendor=174c, idProduct=1153
[ 4415.519194] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 4415.519196] usb 2-2: Product: AS2115
[ 4415.519198] usb 2-2: Manufacturer: ASMedia
[ 4415.519200] usb 2-2: SerialNumber: 00000000000000000000
[ 4415.520006] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 4415.520075] scsi host6: usb-storage 2-2:1.0
[ 4415.527884] ata1.00: supports DRM functions and may not be fully accessible
[ 4415.527926] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4415.528079] ata1.00: supports DRM functions and may not be fully accessible
[ 4415.528121] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 4415.528128] ata1.00: configured for UDMA/133
[ 4415.528138] ata1: EH complete
[ 4415.542027] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
[ 4415.545367] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 4415.575153] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4415.674661] usb 1-1: New USB device found, idVendor=093a, idProduct=2510
[ 4415.674667] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4415.674670] usb 1-1: Product: USB Optical Mouse
[ 4415.674673] usb 1-1: Manufacturer: PixArt
[ 4415.674839] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4415.676951] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0004/input/input29
[ 4415.677105] hid-generic 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[ 4415.829496] usb 1-7: new full-speed USB device number 8 using xhci_hcd
[ 4416.002481] usb 1-7: New USB device found, idVendor=03eb, idProduct=8a31
[ 4416.002485] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4416.002487] usb 1-7: Product: Atmel maXTouch Digitizer
[ 4416.002489] usb 1-7: Manufacturer: Atmel
[ 4416.009861] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:03EB:8A31.0005/input/input30
[ 4416.010053] hid-multitouch 0003:03EB:8A31.0005: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
[ 4416.014777] hid-generic 0003:03EB:8A31.0006: hiddev0,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
[ 4416.520274] scsi 6:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[ 4416.524792] sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4416.525196] sd 6:0:0:0: [sdd] Write Protect is off
[ 4416.525202] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 4416.525436] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4416.589488]  sdd: sdd1 sdd2
[ 4416.591436] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 4418.186293] wlp2s0: authenticate with 30:7e:cb:89:0d:dc
[ 4418.191766] wlp2s0: send auth to 30:7e:cb:89:0d:dc (try 1/3)
[ 4418.203815] wlp2s0: authenticated
[ 4418.203928] wlp2s0: associate with 30:7e:cb:89:0d:dc (try 1/3)
[ 4418.208093] wlp2s0: RX AssocResp from 30:7e:cb:89:0d:dc (capab=0x411 status=0 aid=1)
[ 4418.209431] wlp2s0: associated
[ 4434.355176] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4677.188652] sd_festival[8944]: segfault at 2d0 ip 00007f85039e3860 sp 00007fff50ffa698 error 4 in libpthread-2.20.so[7f85039d6000+17000]
[ 6884.389325] wlp2s0: deauthenticating from 30:7e:cb:89:0d:dc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6884.395188] cfg80211: Calling CRDA to update world regulatory domain
[ 6884.395255] wlp2s0: authenticate with c4:ea:1d:ad:9a:fb
[ 6884.402147] wlp2s0: send auth to c4:ea:1d:ad:9a:fb (try 1/3)
[ 6884.402191] cfg80211: World regulatory domain updated:
[ 6884.402195] cfg80211:  DFS Master region: unset
[ 6884.402196] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6884.402200] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6884.402204] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6884.402207] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6884.402210] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6884.402213] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6884.402216] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6884.402217] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6884.402219] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6884.402242] cfg80211: Calling CRDA for country: FR
[ 6884.404053] cfg80211: Regulatory domain changed to country: FR
[ 6884.404056] cfg80211:  DFS Master region: ETSI
[ 6884.404058] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6884.404062] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6884.404065] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6884.404067] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6884.404069] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 6884.404071] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6884.404081] wlp2s0: authenticated
[ 6884.404238] wlp2s0: associate with c4:ea:1d:ad:9a:fb (try 1/3)
[ 6884.408083] wlp2s0: RX AssocResp from c4:ea:1d:ad:9a:fb (capab=0x411 status=0 aid=1)
[ 6884.409366] wlp2s0: associated
[ 6917.249826] wlp2s0: deauthenticating from c4:ea:1d:ad:9a:fb by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6917.271161] cfg80211: Calling CRDA to update world regulatory domain
[ 6917.271494] wlp2s0: authenticate with 30:7e:cb:89:0d:dc
[ 6917.276371] wlp2s0: send auth to 30:7e:cb:89:0d:dc (try 1/3)
[ 6917.276422] cfg80211: World regulatory domain updated:
[ 6917.276425] cfg80211:  DFS Master region: unset
[ 6917.276427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6917.276431] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6917.276435] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6917.276437] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6917.276440] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6917.276444] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6917.276447] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6917.276449] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6917.276452] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6917.276463] cfg80211: Calling CRDA for country: FR
[ 6917.278284] wlp2s0: authenticated
[ 6917.278597] cfg80211: Regulatory domain changed to country: FR
[ 6917.278599] cfg80211:  DFS Master region: ETSI
[ 6917.278601] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6917.278603] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6917.278605] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6917.278607] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6917.278609] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 6917.278611] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6917.279263] wlp2s0: associate with 30:7e:cb:89:0d:dc (try 1/3)
[ 6917.283682] wlp2s0: RX AssocResp from 30:7e:cb:89:0d:dc (capab=0x411 status=0 aid=1)
[ 6917.284525] wlp2s0: associated

Actions: View

Attachments on bug 20087: 8845 | 8851