Attachment 8555 Details for Bug 19609 – output from dmesg

output from dmesg

dmesgfile (text/plain), 55.73 KB, created by Thomas Andrews on 2016-10-17 16:47:56 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Andrews

Created: 2016-10-17 16:47:56 CEST

Size: 55.73 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 4.4.22-server-1.mga5 (iurt@rabbit.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Sep 24 22:24:44 UTC 2016
>[    0.000000] x86/fpu: Legacy x87 FPU detected.
>[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff2ffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ff30000-0x000000007ff3ffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007ff40000-0x000000007ffeffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.3 present.
>[    0.000000] DMI: ASUSTeK Computer Inc. K8V-MX/K8V-MX, BIOS 1008.013                 06/28/2005
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7ff30 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask FF80000000 write-back
>[    0.000000]   1 disabled
>[    0.000000]   2 disabled
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] BRK [0x00ce2000, 0x00ce2fff] PGTABLE
>[    0.000000] BRK [0x00ce3000, 0x00ce3fff] PGTABLE
>[    0.000000] BRK [0x00ce4000, 0x00ce4fff] PGTABLE
>[    0.000000] BRK [0x00ce5000, 0x00ce5fff] PGTABLE
>[    0.000000] BRK [0x00ce6000, 0x00ce6fff] PGTABLE
>[    0.000000] BRK [0x00ce7000, 0x00ce7fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x3763b000-0x37feffff]
>[    0.000000] Allocated new RAMDISK: [mem 0x32842000-0x331f63b8]
>[    0.000000] Move RAMDISK from [mem 0x3763b000-0x37fef3b8] to [mem 0x32842000-0x331f63b8]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FA920 000014 (v00 ACPIAM)
>[    0.000000] ACPI: RSDT 0x000000007FF30000 00002C (v01 A M I  OEMRSDT  06000528 MSFT 00000097)
>[    0.000000] ACPI: FACP 0x000000007FF30200 000081 (v01 A M I  OEMFACP  06000528 MSFT 00000097)
>[    0.000000] ACPI: DSDT 0x000000007FF303E0 003944 (v01 A0023  A0023010 00000010 MSFT 0100000D)
>[    0.000000] ACPI: FACS 0x000000007FF40000 000040
>[    0.000000] ACPI: APIC 0x000000007FF30390 00004A (v01 A M I  OEMAPIC  06000528 MSFT 00000097)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1229MB HIGHMEM available.
>[    0.000000] 817MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 331fe000
>[    0.000000]   low ram: 0 - 331fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000331fdfff]
>[    0.000000]   HighMem  [mem 0x00000000331fe000-0x000000007ff2ffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff2ffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff2ffff]
>[    0.000000] On node 0 totalpages: 523982
>[    0.000000] free_area_init_node: node 0, pgdat c0b56d40, node_mem_map f1442028
>[    0.000000]   DMA zone: 40 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   Normal zone: 2005 pages used for memmap
>[    0.000000]   Normal zone: 205310 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 314674 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
>[    0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 19 pages/cpu @f1423000 s47500 r0 d30324 u77824
>[    0.000000] pcpu-alloc: s47500 r0 d30324 u77824 alloc=19*4096
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521937
>[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=88ced396-1409-4250-9dec-15c8320dbbb7 nokmsboot splash quiet noiswmd resume=UUID=259b8edd-e2c0-4733-ada9-164f03b009bf vga=788
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000331fe:0007ff30)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 2052308K/2095928K available (6924K kernel code, 765K rwdata, 3004K rodata, 864K init, 528K bss, 43620K reserved, 0K cma-reserved, 1258696K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xff5b5000 - 0xfffff000   (10536 kB)
>    pkmap   : 0xff200000 - 0xff400000   (2048 kB)
>    vmalloc : 0xf39fe000 - 0xff1fe000   ( 184 MB)
>    lowmem  : 0xc0000000 - 0xf31fe000   ( 817 MB)
>      .init : 0xc0b75000 - 0xc0c4d000   ( 864 kB)
>      .data : 0xc07c3584 - 0xc0b73540   (3775 kB)
>      .text : 0xc0100000 - 0xc07c3584   (6925 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 32.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
>[    0.000000] NR_IRQS:8448 nr_irqs:256 16
>[    0.000000] CPU 0 irqstacks, hard=f0c34000 soft=f0c36000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1800.088 MHz processor
>[    0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.17 BogoMIPS (lpj=18000880)
>[    0.010018] pid_max: default: 32768 minimum: 301
>[    0.010029] ACPI: Core revision 20150930
>[    0.015144] ACPI: 1 ACPI AML tables successfully acquired and loaded
>[    0.015168] Security Framework initialized
>[    0.015174] TOMOYO Linux initialized
>[    0.015193] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.015196] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.015508] Initializing cgroup subsys io
>[    0.015516] Initializing cgroup subsys memory
>[    0.015530] Initializing cgroup subsys devices
>[    0.015535] Initializing cgroup subsys freezer
>[    0.015540] Initializing cgroup subsys net_cls
>[    0.015567] mce: CPU supports 5 MCE banks
>[    0.015582] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
>[    0.015584] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
>[    0.027067] Freeing SMP alternatives memory: 28K (c0c4d000 - c0c54000)
>[    0.030012] ftrace: allocating 27747 entries in 55 pages
>[    0.050143] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.051131] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.160000] smpboot: CPU0: AMD Sempron(tm) Processor 3100+ (family: 0xf, model: 0x2c, stepping: 0x2)
>[    0.160000] Performance Events: AMD PMU driver.
>[    0.160000] ... version:                0
>[    0.160000] ... bit width:              48
>[    0.160000] ... generic registers:      4
>[    0.160000] ... value mask:             0000ffffffffffff
>[    0.160000] ... max period:             00007fffffffffff
>[    0.160000] ... fixed-purpose events:   0
>[    0.160000] ... event mask:             000000000000000f
>[    0.160000] MCE: In-kernel MCE decoding enabled.
>[    0.160000] x86: Booted up 1 node, 1 CPUs
>[    0.160000] smpboot: Total of 1 processors activated (3600.17 BogoMIPS)
>[    0.160000] devtmpfs: initialized
>[    0.160000] PM: Registering ACPI NVS region [mem 0x7ff40000-0x7ffeffff] (720896 bytes)
>[    0.160000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.160000] xor: measuring software checksum speed
>[    0.250003]    pIII_sse  :  5557.600 MB/sec
>[    0.350003]    prefetch64-sse:  5512.400 MB/sec
>[    0.350005] xor: using function: pIII_sse (5557.600 MB/sec)
>[    0.350015] pinctrl core: initialized pinctrl subsystem
>[    0.350216] RTC time:  9:47:14, date: 10/17/16
>[    0.350433] NET: Registered protocol family 16
>[    0.350754] cpuidle: using governor ladder
>[    0.350758] cpuidle: using governor menu
>[    0.350766] node 0 link 0: io port [1000, ffffff]
>[    0.350771] TOM: 0000000080000000 aka 2048M
>[    0.350775] node 0 link 0: mmio [a0000, bffff]
>[    0.350779] node 0 link 0: mmio [80000000, ffffffff]
>[    0.350783] bus: [bus 00-ff] on node 0 link 0
>[    0.350786] bus: 00 [io  0x0000-0xffff]
>[    0.350788] bus: 00 [mem 0x000a0000-0x000bffff]
>[    0.350791] bus: 00 [mem 0x80000000-0xfcffffffff]
>[    0.350898] ACPI: bus type PCI registered
>[    0.350901] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.352684] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
>[    0.352717] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>[    0.352719] PCI: Using configuration type 1 for base access
>[    0.520028] raid6: mmxx1    gen()  1513 MB/s
>[    0.690018] raid6: mmxx2    gen()  2816 MB/s
>[    0.860044] raid6: sse1x1   gen()   529 MB/s
>[    1.030008] raid6: sse1x2   gen()   882 MB/s
>[    1.200055] raid6: sse2x1   gen()   932 MB/s
>[    1.370007] raid6: sse2x1   xor()  2010 MB/s
>[    1.540042] raid6: sse2x2   gen()  1348 MB/s
>[    1.710010] raid6: sse2x2   xor()  2177 MB/s
>[    1.880012] raid6: int32x1  gen()   678 MB/s
>[    2.050056] raid6: int32x1  xor()   443 MB/s
>[    2.220063] raid6: int32x2  gen()   939 MB/s
>[    2.390032] raid6: int32x2  xor()   623 MB/s
>[    2.560042] raid6: int32x4  gen()   748 MB/s
>[    2.730059] raid6: int32x4  xor()   525 MB/s
>[    2.900022] raid6: int32x8  gen()   701 MB/s
>[    3.070066] raid6: int32x8  xor()   465 MB/s
>[    3.070068] raid6: using algorithm mmxx2 gen() 2816 MB/s
>[    3.070070] raid6: using intx1 recovery algorithm
>[    3.070286] ACPI: Added _OSI(Module Device)
>[    3.070289] ACPI: Added _OSI(Processor Device)
>[    3.070291] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    3.070294] ACPI: Added _OSI(Processor Aggregator Device)
>[    3.072413] ACPI: Executed 1 blocks of module-level executable AML code
>[    3.074611] ACPI: Interpreter enabled
>[    3.074631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
>[    3.074651] ACPI: (supports S0 S1 S3 S4 S5)
>[    3.074654] ACPI: Using IOAPIC for interrupt routing
>[    3.074702] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    3.081932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    3.081942] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    3.081950] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>[    3.081956] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    3.082195] PCI host bridge to bus 0000:00
>[    3.082201] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    3.082204] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    3.082208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    3.082211] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
>[    3.082215] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    3.082232] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
>[    3.082254] pci 0000:00:00.0: reg 0x10: [mem 0xde000000-0xdfffffff pref]
>[    3.082424] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
>[    3.082562] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
>[    3.082704] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
>[    3.082844] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
>[    3.082985] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
>[    3.083127] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
>[    3.083177] pci 0000:00:01.0: supports D1
>[    3.083288] pci 0000:00:07.0: [1106:3044] type 00 class 0x0c0010
>[    3.083310] pci 0000:00:07.0: reg 0x10: [mem 0xf9e00000-0xf9e007ff]
>[    3.083320] pci 0000:00:07.0: reg 0x14: [io  0xe800-0xe87f]
>[    3.083376] pci 0000:00:07.0: supports D2
>[    3.083379] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
>[    3.083500] pci 0000:00:0c.0: [14e4:4318] type 00 class 0x028000
>[    3.083515] pci 0000:00:0c.0: reg 0x10: [mem 0xf9d00000-0xf9d01fff]
>[    3.083664] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
>[    3.083685] pci 0000:00:0f.0: reg 0x10: [io  0xe400-0xe407]
>[    3.083695] pci 0000:00:0f.0: reg 0x14: [io  0xe000-0xe003]
>[    3.083705] pci 0000:00:0f.0: reg 0x18: [io  0xd800-0xd807]
>[    3.083715] pci 0000:00:0f.0: reg 0x1c: [io  0xd400-0xd403]
>[    3.083725] pci 0000:00:0f.0: reg 0x20: [io  0xd000-0xd00f]
>[    3.083735] pci 0000:00:0f.0: reg 0x24: [io  0xc800-0xc8ff]
>[    3.083869] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
>[    3.083917] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
>[    3.083937] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    3.083940] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    3.083943] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    3.083946] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    3.084081] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>[    3.084128] pci 0000:00:10.0: reg 0x20: [io  0xb400-0xb41f]
>[    3.084163] pci 0000:00:10.0: supports D1 D2
>[    3.084166] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.084223] pci 0000:00:10.0: System wakeup disabled by ACPI
>[    3.084296] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>[    3.084342] pci 0000:00:10.1: reg 0x20: [io  0xb800-0xb81f]
>[    3.084377] pci 0000:00:10.1: supports D1 D2
>[    3.084380] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.084438] pci 0000:00:10.1: System wakeup disabled by ACPI
>[    3.084514] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
>[    3.084560] pci 0000:00:10.2: reg 0x20: [io  0xc000-0xc01f]
>[    3.084595] pci 0000:00:10.2: supports D1 D2
>[    3.084598] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.084652] pci 0000:00:10.2: System wakeup disabled by ACPI
>[    3.084730] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
>[    3.084776] pci 0000:00:10.3: reg 0x20: [io  0xc400-0xc41f]
>[    3.084811] pci 0000:00:10.3: supports D1 D2
>[    3.084814] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.084869] pci 0000:00:10.3: System wakeup disabled by ACPI
>[    3.084944] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
>[    3.084965] pci 0000:00:10.4: reg 0x10: [mem 0xf9b00000-0xf9b000ff]
>[    3.085025] pci 0000:00:10.4: supports D1 D2
>[    3.085028] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.085082] pci 0000:00:10.4: System wakeup disabled by ACPI
>[    3.085157] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
>[    3.085221] HPET not enabled in BIOS. You might try hpet=force boot option
>[    3.085228] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
>[    3.085358] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>[    3.085379] pci 0000:00:11.5: reg 0x10: [io  0xb000-0xb0ff]
>[    3.085441] pci 0000:00:11.5: supports D1 D2
>[    3.085494] pci 0000:00:11.5: System wakeup disabled by ACPI
>[    3.085568] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
>[    3.085588] pci 0000:00:11.6: reg 0x10: [io  0x0000-0x00ff]
>[    3.085743] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
>[    3.085764] pci 0000:00:12.0: reg 0x10: [io  0xa800-0xa8ff]
>[    3.085774] pci 0000:00:12.0: reg 0x14: [mem 0xf9a00000-0xf9a000ff]
>[    3.085829] pci 0000:00:12.0: supports D1 D2
>[    3.085832] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    3.085886] pci 0000:00:12.0: System wakeup disabled by ACPI
>[    3.085962] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
>[    3.086077] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
>[    3.086184] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
>[    3.086294] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
>[    3.086456] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
>[    3.086473] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
>[    3.086481] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff pref]
>[    3.086489] pci 0000:01:00.0: reg 0x18: [mem 0xfa000000-0xfaffffff]
>[    3.086509] pci 0000:01:00.0: reg 0x30: [mem 0xf9f00000-0xf9f1ffff pref]
>[    3.086607] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    3.086614] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
>[    3.086619] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
>[    3.086627] pci_bus 0000:00: on NUMA node 0
>[    3.087475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>[    3.087550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>[    3.087622] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>[    3.087695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    3.087768] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    3.087841] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    3.087914] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    3.087991] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>[    3.088317] vgaarb: setting as boot device: PCI:0000:01:00.0
>[    3.088322] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    3.088324] vgaarb: loaded
>[    3.088326] vgaarb: bridge control possible 0000:01:00.0
>[    3.088344] sta2x11_scr_init
>[    3.088361] sta2x11_apb_soc_regs_init
>[    3.088375] sta2x11_sctl_init
>[    3.088389] sta2x11_apbreg_init
>[    3.088918] SCSI subsystem initialized
>[    3.088990] libata version 3.00 loaded.
>[    3.089198] PCI: Using ACPI for IRQ routing
>[    3.089203] PCI: pci_cache_line_size set to 64 bytes
>[    3.089265] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    3.089269] e820: reserve RAM buffer [mem 0x7ff30000-0x7fffffff]
>[    3.089492] NetLabel: Initializing
>[    3.089494] NetLabel:  domain hash size = 128
>[    3.089496] NetLabel:  protocols = UNLABELED CIPSOv4
>[    3.089514] NetLabel:  unlabeled traffic allowed by default
>[    3.089658] clocksource: Switched to clocksource refined-jiffies
>[    3.102826] pnp: PnP ACPI init
>[    3.102952] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    3.103320] pnp 00:01: [dma 2]
>[    3.103394] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
>[    3.103672] pnp 00:02: [dma 3]
>[    3.103819] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
>[    3.103962] pnp 00:03: disabling [io  0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103966] pnp 00:03: disabling [io  0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103970] pnp 00:03: disabling [io  0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103974] pnp 00:03: disabling [io  0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103977] pnp 00:03: disabling [io  0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103981] pnp 00:03: disabling [io  0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103985] pnp 00:03: disabling [io  0x0080] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103989] pnp 00:03: disabling [io  0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103993] pnp 00:03: disabling [io  0x0088] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.103997] pnp 00:03: disabling [io  0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.104001] pnp 00:03: disabling [io  0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.104005] pnp 00:03: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.104008] pnp 00:03: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
>[    3.104064] system 00:03: [io  0x0295-0x0296] has been reserved
>[    3.104068] system 00:03: [io  0x03e1-0x03e7] has been reserved
>[    3.104072] system 00:03: [io  0x04d0-0x04d1] has been reserved
>[    3.104075] system 00:03: [io  0x0800-0x087f] has been reserved
>[    3.104079] system 00:03: [io  0x0400-0x041f] has been reserved
>[    3.104084] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.104216] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    3.104220] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
>[    3.104224] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
>[    3.104228] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.104556] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>[    3.104802] pnp 00:06: [dma 0 disabled]
>[    3.104897] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    3.105141] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
>[    3.105145] system 00:07: [mem 0x000c0000-0x000dffff] could not be reserved
>[    3.105149] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
>[    3.105153] system 00:07: [mem 0x00100000-0x7ffeffff] could not be reserved
>[    3.105157] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    3.105325] pnp: PnP ACPI: found 8 devices
>[    3.105334] PnPBIOS: Disabled by ACPI PNP
>[    3.142582] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    3.142608] clocksource: Switched to clocksource acpi_pm
>[    3.142647] pci 0000:00:11.6: BAR 0: assigned [io  0x1000-0x10ff]
>[    3.142659] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    3.142665] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
>[    3.142671] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
>[    3.142682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    3.142685] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    3.142689] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    3.142693] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff window]
>[    3.142696] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfbffffff]
>[    3.142700] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf8ffffff pref]
>[    3.142752] NET: Registered protocol family 2
>[    3.142968] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    3.142996] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    3.143042] TCP: Hash tables configured (established 8192 bind 8192)
>[    3.143094] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    3.143106] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    3.143179] NET: Registered protocol family 1
>[    3.143201] pci 0000:00:00.0: MSI quirk detected; MSI disabled
>[    3.143221] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>[    3.144296] pci 0000:01:00.0: Video device with shadowed ROM
>[    3.144299] PCI: CLS 32 bytes, default 64
>[    3.144468] Trying to unpack rootfs image as initramfs...
>[    3.354835] Freeing initrd memory: 9940K (f2842000 - f31f7000)
>[    3.354863] sta2x11_mfd_init
>[    3.355042] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>[    3.355045] apm: overridden by ACPI.
>[    3.355562] futex hash table entries: 256 (order: 2, 16384 bytes)
>[    3.355602] audit: initializing netlink subsys (disabled)
>[    3.355630] audit: type=2000 audit(1476697636.349:1): initialized
>[    3.356112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    3.359732] zbud: loaded
>[    3.359854] VFS: Disk quotas dquot_6.6.0
>[    3.359937] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    3.361150] bounce: pool size: 64 pages
>[    3.361235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    3.361275] io scheduler noop registered
>[    3.361279] io scheduler deadline registered
>[    3.361349] io scheduler cfq registered (default)
>[    3.361680] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    3.361698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    3.361802] vesafb: mode is 800x600x16, linelength=1600, pages=2
>[    3.361804] vesafb: protected mode interface info at c000:d3a0
>[    3.361807] vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
>[    3.361809] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>[    3.361823] vesafb: scrolling: redraw
>[    3.361827] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>[    3.361855] vesafb: framebuffer at 0xe0000000, mapped to 0xf3c00000, using 1875k, total 262144k
>[    3.384145] Console: switching to colour frame buffer device 100x37
>[    3.405931] fb0: VESA VGA frame buffer device
>[    3.406008] GHES: HEST is not enabled!
>[    3.406048] isapnp: Scanning for PnP cards...
>[    3.718668] isapnp: No Plug & Play device found
>[    3.718804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    3.739314] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    3.759849] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    3.760387] Linux agpgart interface v0.103
>[    3.760470] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
>[    3.761671] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xde000000
>[    3.767299] brd: module loaded
>[    3.767783] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    3.768325] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    3.768336] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    3.768575] mousedev: PS/2 mouse device common for all mice
>[    3.768633] rtc_cmos 00:00: RTC can wake from S4
>[    3.768858] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    3.768904] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
>[    3.768965] ledtrig-cpu: registered to indicate activity on CPUs
>[    3.769213] Key type dns_resolver registered
>[    3.769431] microcode: AMD CPU family 0xf not supported
>[    3.769451] Using IPI No-Shortcut mode
>[    3.769652] registered taskstats version 1
>[    3.769685] zswap: loaded using pool lzo/zbud
>[    3.770609] Btrfs loaded
>[    3.771024]   Magic number: 4:491:778
>[    3.771140] rtc_cmos 00:00: setting system clock to 2016-10-17 09:47:17 UTC (1476697637)
>[    3.771207] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>[    3.771365] PM: Checking hibernation image partition UUID=259b8edd-e2c0-4733-ada9-164f03b009bf
>[    3.826687] PM: Hibernation image not present or could not be loaded.
>[    3.827508] Freeing unused kernel memory: 864K (c0b75000 - c0c4d000)
>[    3.827632] Write protecting the kernel text: 6928k
>[    3.827672] Write protecting the kernel read-only data: 3008k
>[    3.827674] NX-protecting the kernel data: 6384k
>[    3.919007] dracut: dracut-038
>[    3.945981] sata_via 0000:00:0f.0: version 2.6
>[    3.946193] sata_via 0000:00:0f.0: routed to hard irq line 10
>[    3.947455] scsi host0: sata_via
>[    3.947594] scsi host1: sata_via
>[    3.947674] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
>[    3.947677] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
>[    4.150021] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[    4.350022] tsc: Refined TSC clocksource calibration: 1800.063 MHz
>[    4.350027] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f265276e5, max_idle_ns: 440795239467 ns
>[    4.370014] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>[    4.385515] pata_via 0000:00:0f.1: version 0.3.4
>[    4.387487] scsi host2: pata_via
>[    4.387626] scsi host3: pata_via
>[    4.387705] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>[    4.387708] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>[    4.580560] ata3.00: ATA-7: Maxtor 5A250J0, RAM51VV0, max UDMA/133
>[    4.580564] ata3.00: 490234752 sectors, multi 16: LBA48 
>[    4.580694] ata3.01: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
>[    4.580698] ata3.01: 156301488 sectors, multi 16: LBA 
>[    4.620407] ata3.00: configured for UDMA/133
>[    4.640320] ata3.01: configured for UDMA/100
>[    4.640503] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 5A250J0   1VV0 PQ: 0 ANSI: 5
>[    4.640890] sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
>[    4.640959] sd 2:0:0:0: [sda] Write Protect is off
>[    4.640963] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.640993] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.662169]  sda: sda1 sda2 sda3
>[    4.662290] scsi 2:0:1:0: Direct-Access     ATA      WDC WD800JB-00JJ 1C05 PQ: 0 ANSI: 5
>[    4.662629] sd 2:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    4.662773] sd 2:0:1:0: [sdb] Write Protect is off
>[    4.662778] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>[    4.662810] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.675565]  sdb: sdb1
>[    4.675770] sd 2:0:0:0: [sda] Attached SCSI disk
>[    4.676051] sd 2:0:1:0: [sdb] Attached SCSI disk
>[    4.840406] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
>[    4.880276] ata4.00: configured for UDMA/66
>[    4.882422] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
>[    4.905344] Uniform Multi-Platform E-IDE driver
>[    5.089938] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
>[    5.191130] dracut: Starting plymouth daemon
>[    5.360140] clocksource: Switched to clocksource tsc
>[    8.965731] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    8.965740] ACPI: Power Button [PWRB]
>[    8.965837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    8.965840] ACPI: Power Button [PWRF]
>[    9.060107] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    9.060115] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    9.070253] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    9.178618] ACPI: bus type USB registered
>[    9.178670] usbcore: registered new interface driver usbfs
>[    9.178692] usbcore: registered new interface driver hub
>[    9.178728] usbcore: registered new device driver usb
>[    9.180110] firewire_ohci 0000:00:07.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
>[    9.256519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    9.257560] ehci-pci: EHCI PCI platform driver
>[    9.257787] ehci-pci 0000:00:10.4: EHCI Host Controller
>[    9.257798] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
>[    9.257860] ehci-pci 0000:00:10.4: irq 21, io mem 0xf9b00000
>[    9.286480] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
>[    9.286611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    9.286616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.286619] usb usb1: Product: EHCI Host Controller
>[    9.286622] usb usb1: Manufacturer: Linux 4.4.22-server-1.mga5 ehci_hcd
>[    9.286625] usb usb1: SerialNumber: 0000:00:10.4
>[    9.289099] hub 1-0:1.0: USB hub found
>[    9.289115] hub 1-0:1.0: 8 ports detected
>[    9.294281] uhci_hcd: USB Universal Host Controller Interface driver
>[    9.294500] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[    9.294511] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[    9.294523] uhci_hcd 0000:00:10.0: detected 2 ports
>[    9.294546] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
>[    9.310156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.310163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.310166] usb usb2: Product: UHCI Host Controller
>[    9.310169] usb usb2: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
>[    9.310172] usb usb2: SerialNumber: 0000:00:10.0
>[    9.310420] hub 2-0:1.0: USB hub found
>[    9.310897] hub 2-0:1.0: 2 ports detected
>[    9.311264] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[    9.311274] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[    9.311283] uhci_hcd 0000:00:10.1: detected 2 ports
>[    9.311306] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
>[    9.312112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.312118] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.312121] usb usb3: Product: UHCI Host Controller
>[    9.312124] usb usb3: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
>[    9.312127] usb usb3: SerialNumber: 0000:00:10.1
>[    9.312996] hub 3-0:1.0: USB hub found
>[    9.313012] hub 3-0:1.0: 2 ports detected
>[    9.313331] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[    9.313344] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[    9.313353] uhci_hcd 0000:00:10.2: detected 2 ports
>[    9.313376] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
>[    9.314168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.314174] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.314177] usb usb4: Product: UHCI Host Controller
>[    9.314180] usb usb4: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
>[    9.314183] usb usb4: SerialNumber: 0000:00:10.2
>[    9.319590] hub 4-0:1.0: USB hub found
>[    9.319621] hub 4-0:1.0: 2 ports detected
>[    9.319956] uhci_hcd 0000:00:10.3: UHCI Host Controller
>[    9.319969] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>[    9.319978] uhci_hcd 0000:00:10.3: detected 2 ports
>[    9.320001] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
>[    9.320877] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.320882] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.320885] usb usb5: Product: UHCI Host Controller
>[    9.320888] usb usb5: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
>[    9.320891] usb usb5: SerialNumber: 0000:00:10.3
>[    9.321126] hub 5-0:1.0: USB hub found
>[    9.321140] hub 5-0:1.0: 2 ports detected
>[    9.639237] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[    9.639245] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[    9.639249] PM: Basic memory bitmaps created
>[    9.641031] PM: Basic memory bitmaps freed
>[    9.644773] PM: Starting manual resume from disk
>[    9.644782] PM: Hibernation image partition 8:2 present
>[    9.644784] PM: Looking for hibernation image.
>[    9.655581] PM: Image not found (code -22)
>[    9.655587] PM: Hibernation image not present or could not be loaded.
>[    9.680248] firewire_core 0000:00:07.0: created device fw0: GUID 0011d8000023471e, S400
>[    9.745589] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    9.800031] usb 3-2: new full-speed USB device number 2 using uhci_hcd
>[    9.856191] dracut: Checking ext4: /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7
>[    9.856470] dracut: issuing e2fsck -a  /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7
>[    9.870055] usb 1-7: new high-speed USB device number 3 using ehci-pci
>[    9.936174] dracut: /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7: clean, 154544/801248 files, 1635416/3203072 blocks
>[    9.939028] dracut: Mounting /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7 with -o relatime,acl
>[    9.990982] usb 3-2: New USB device found, idVendor=046d, idProduct=c534
>[    9.990989] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.990993] usb 3-2: Product: USB Receiver
>[    9.990995] usb 3-2: Manufacturer: Logitech
>[   10.014673] hidraw: raw HID events driver (C) Jiri Kosina
>[   10.033428] usbcore: registered new interface driver usbhid
>[   10.033434] usbhid: USB HID core driver
>[   10.036603] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input4
>[   10.077149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
>[   10.090356] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-2/input0
>[   10.092085] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input5
>[   10.150984] usb 1-7: New USB device found, idVendor=048d, idProduct=1336
>[   10.150991] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[   10.150994] usb 1-7: Product: Mass Storage Device
>[   10.150997] usb 1-7: Manufacturer: Generic   
>[   10.150999] usb 1-7: SerialNumber: 00000000000006
>[   10.157174] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2/input1
>[   10.163717] usb-storage 1-7:1.0: USB Mass Storage device detected
>[   10.165765] scsi host4: usb-storage 1-7:1.0
>[   10.165921] usbcore: registered new interface driver usb-storage
>[   10.168299] usbcore: registered new interface driver uas
>[   10.304832] dracut: Mounted root filesystem /dev/sda1
>[   10.522413] dracut: Switching root
>[   10.553388] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>[   11.134742] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
>[   11.160599] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
>[   11.162333] sd 4:0:0:0: [sdc] Attached SCSI removable disk
>[   11.206399] random: systemd: uninitialized urandom read (16 bytes read, 87 bits of entropy available)
>[   11.613312] NET: Registered protocol family 10
>[   11.766841] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 97 bits of entropy available)
>[   12.362153] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
>[   12.362287] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
>[   12.362629] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
>[   12.404392] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
>[   12.435702] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
>[   12.435755] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
>[   12.497239] random: systemd: uninitialized urandom read (16 bytes read, 106 bits of entropy available)
>[   13.066813] systemd[1]: Cannot add dependency job for unit cups.service, ignoring: Unit cups.service failed to load: No such file or directory.
>[   13.066828] systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit avahi-daemon.service failed to load: No such file or directory.
>[   13.098231] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[   13.818139] EXT4-fs (sda1): re-mounted. Opts: acl
>[   14.694108] random: nonblocking pool is initialized
>[   16.705759] powernow_k8: fid 0xa (1800 MHz), vid 0x6
>[   16.705766] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
>[   16.705813] powernow_k8: Found 1 AMD Sempron(tm) Processor 3100+ (1 cpu cores) (version 2.20.00)
>[   17.305845] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   17.426071] parport_pc 00:02: reported by Plug and Play ACPI
>[   17.426172] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>[   17.497604] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>[   17.790057] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
>[   17.790072] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
>[   17.790078] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
>[   17.790084] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
>[   17.790090] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
>[   17.870276] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0c.0
>[   18.233128] EDAC MC: Ver: 3.0.0
>[   18.260576] AMD64 EDAC driver v3.4.0
>[   18.260628] EDAC amd64: DRAM ECC disabled.
>[   18.260633] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> (Note that use of the override may cause unknown side effects.)
>[   18.299472] [drm] Initialized drm 1.1.0 20060810
>[   18.539534] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
>[   18.540122] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1a800, 00:13:d4:39:0f:d3, IRQ 23
>[   18.540900] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
>[   18.755721] ppdev: user-space parallel port driver
>[   18.877491] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
>[   19.695762] cfg80211: World regulatory domain updated:
>[   19.695770] cfg80211:  DFS Master region: unset
>[   19.695773] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[   19.695777] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[   19.695780] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[   19.695783] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[   19.695786] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[   19.695790] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[   19.695793] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[   19.695796] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[   19.695798] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[   19.820099] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
>[   20.032740] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
>[   20.095166] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
>[   20.095189] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
>[   20.114226] Broadcom 43xx driver loaded [ Features: PNLS ]
>[   20.130473] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
>[   20.562983] cfg80211: Regulatory domain changed to country: US
>[   20.562991] cfg80211:  DFS Master region: FCC
>[   20.562993] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[   20.562997] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
>[   20.563001] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
>[   20.563004] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
>[   20.563008] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
>[   20.563010] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
>[   20.563013] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[   20.589721] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   21.051962] Adding 8363004k swap on /dev/sda2.  Priority:-1 extents:1 across:8363004k FS
>[   21.392945] nvidia: module license 'NVIDIA' taints kernel.
>[   21.392954] Disabling lock debugging due to kernel taint
>[   21.471366] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[   21.472340] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
>[   21.472354] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.131  Sun Nov  8 21:44:08 PST 2015
>[   22.175884] systemd-journald[478]: Received request to flush runtime journal from PID 1
>[   24.089589] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl
>[   35.840291] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
>[   36.130032] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
>[   36.150069] b43-phy0 debug: Chip initialized
>[   36.150376] b43-phy0 debug: 32-bit DMA initialized
>[   36.150415] b43-phy0 debug: QoS enabled
>[   36.190381] b43-phy0 debug: Wireless interface started
>[   36.210098] b43-phy0 debug: Adding Interface type 2
>[   36.231968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   36.276077] b43-phy0 debug: Removing Interface type 2
>[   36.276451] b43-phy0 debug: Wireless interface stopped
>[   36.276459] b43-phy0 debug: DMA-32 rx_ring: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.276603] b43-phy0 debug: DMA-32 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.290069] b43-phy0 debug: DMA-32 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.310029] b43-phy0 debug: DMA-32 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.330062] b43-phy0 debug: DMA-32 tx_ring_AC_VO: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.350035] b43-phy0 debug: DMA-32 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
>[   36.550041] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
>[   36.570053] b43-phy0 debug: Chip initialized
>[   36.570354] b43-phy0 debug: 32-bit DMA initialized
>[   36.570395] b43-phy0 debug: QoS enabled
>[   36.610375] b43-phy0 debug: Wireless interface started
>[   36.630071] b43-phy0 debug: Adding Interface type 2
>[   36.650112] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   37.161631] NET: Registered protocol family 17
>[   37.391475] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>[   37.391487] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>[   37.391545] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
>[   38.066258] NVRM: Your system is not currently configured to drive a VGA console
>[   38.066267] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
>[   38.066270] NVRM: requires the use of a text-mode VGA console. Use of other console
>[   38.066273] NVRM: drivers including, but not limited to, vesafb, may result in
>[   38.066276] NVRM: corruption and stability problems, and is not supported.
>[   38.370965] wlan0: authenticate with 00:1d:7e:65:8e:00
>[   38.400237] wlan0: send auth to 00:1d:7e:65:8e:00 (try 1/3)
>[   38.401947] wlan0: authenticated
>[   38.401986] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
>[   38.401990] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
>[   38.411335] wlan0: associate with 00:1d:7e:65:8e:00 (try 1/3)
>[   38.413534] wlan0: RX AssocResp from 00:1d:7e:65:8e:00 (capab=0x411 status=0 aid=2)
>[   38.413965] wlan0: associated
>[   38.414026] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   38.498425] w83627hf: w83627hf: Found W83697HF chip at 0x290
>[   38.666187] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:1d:7e:65:8e:00
>[   38.666281] b43-phy0 debug: Using hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
>[   44.663143] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   44.828304] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   48.789760] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   49.145196] Netfilter messages via NETLINK v0.30.
>[   49.150411] ctnetlink v0.93: registering with nfnetlink.
>[   52.317110] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[   52.406503] xt_CT: No such helper "pptp"
>[   52.420751] xt_CT: No such helper "irc"
>[   52.429818] xt_CT: No such helper "irc-0"
>[   52.465464] xt_CT: No such helper "snmp"
>[   52.473588] xt_CT: No such helper "netbios-ns"
>[   53.257656] xt_addrtype: ipv6 does not support BROADCAST matching
>[   58.432572] ip_set: protocol 6
>[   59.037740] netfilter PSD loaded - (c) astaro AG
>[   59.171190] IFWLOG: register target
>[   64.000017] Adjusting tsc more than 11% (10368863 vs 10345587)
>[  151.780038] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  151.780046] ata3.00: BMDMA stat 0x64
>[  151.780051] ata3.00: failed command: READ DMA EXT
>[  151.780059] ata3.00: cmd 25/00:00:70:02:e3/00:01:15:00:00/e0 tag 0 dma 131072 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  151.780063] ata3.00: status: { DRDY ERR }
>[  151.780066] ata3.00: error: { UNC }
>[  151.840411] ata3.00: configured for UDMA/133
>[  151.860344] ata3.01: configured for UDMA/100
>[  151.860371] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  151.860376] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  151.860381] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  151.860386] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 02 70 00 01 00 00
>[  151.860389] blk_update_request: I/O error, dev sda, sector 367199085
>[  151.860422] ata3: EH complete
>[  153.690092] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  153.690100] ata3.00: BMDMA stat 0x64
>[  153.690104] ata3.00: failed command: READ DMA EXT
>[  153.690113] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  153.690117] ata3.00: status: { DRDY ERR }
>[  153.690119] ata3.00: error: { UNC }
>[  153.750436] ata3.00: configured for UDMA/133
>[  153.770375] ata3.01: configured for UDMA/100
>[  153.770401] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  153.770407] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  153.770412] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  153.770417] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
>[  153.770421] blk_update_request: I/O error, dev sda, sector 367199085
>[  153.770448] ata3: EH complete
>[  155.560037] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  155.560045] ata3.00: BMDMA stat 0x64
>[  155.560049] ata3.00: failed command: READ DMA EXT
>[  155.560057] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  155.560062] ata3.00: status: { DRDY ERR }
>[  155.560064] ata3.00: error: { UNC }
>[  155.620451] ata3.00: configured for UDMA/133
>[  155.640327] ata3.01: configured for UDMA/100
>[  155.640351] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  155.640357] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  155.640362] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  155.640367] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
>[  155.640371] blk_update_request: I/O error, dev sda, sector 367199085
>[  155.640404] ata3: EH complete
>[  157.420041] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  157.420049] ata3.00: BMDMA stat 0x64
>[  157.420054] ata3.00: failed command: READ DMA EXT
>[  157.420062] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  157.420066] ata3.00: status: { DRDY ERR }
>[  157.420068] ata3.00: error: { UNC }
>[  157.480448] ata3.00: configured for UDMA/133
>[  157.500327] ata3.01: configured for UDMA/100
>[  157.500350] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  157.500355] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  157.500360] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  157.500366] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
>[  157.500369] blk_update_request: I/O error, dev sda, sector 367199085
>[  157.500403] ata3: EH complete
>[  159.420041] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  159.420049] ata3.00: BMDMA stat 0x64
>[  159.420054] ata3.00: failed command: READ DMA EXT
>[  159.420062] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  159.420066] ata3.00: status: { DRDY ERR }
>[  159.420069] ata3.00: error: { UNC }
>[  159.480444] ata3.00: configured for UDMA/133
>[  159.500350] ata3.01: configured for UDMA/100
>[  159.500376] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  159.500382] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  159.500386] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  159.500392] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
>[  159.500395] blk_update_request: I/O error, dev sda, sector 367199085
>[  159.500427] ata3: EH complete
>[  161.320048] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>[  161.320055] ata3.00: BMDMA stat 0x64
>[  161.320060] ata3.00: failed command: READ DMA EXT
>[  161.320068] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
>         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
>[  161.320072] ata3.00: status: { DRDY ERR }
>[  161.320074] ata3.00: error: { UNC }
>[  161.400426] ata3.00: configured for UDMA/133
>[  161.420348] ata3.01: configured for UDMA/100
>[  161.420374] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
>[  161.420380] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
>[  161.420384] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
>[  161.420390] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
>[  161.420393] blk_update_request: I/O error, dev sda, sector 367199085
>[  161.420427] ata3: EH complete
>[  169.800021] usb 1-6: new high-speed USB device number 4 using ehci-pci
>[  169.956784] usb 1-6: New USB device found, idVendor=058f, idProduct=6387
>[  169.956791] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[  169.956794] usb 1-6: Product: Mass Storage
>[  169.956797] usb 1-6: Manufacturer: Generic
>[  169.956800] usb 1-6: SerialNumber: 289CCFEB
>[  169.958043] usb-storage 1-6:1.0: USB Mass Storage device detected
>[  169.958287] scsi host5: usb-storage 1-6:1.0
>[  170.952009] scsi 5:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
>[  170.955141] sd 5:0:0:0: [sdd] 16099328 512-byte logical blocks: (8.24 GB/7.68 GiB)
>[  170.956280] sd 5:0:0:0: [sdd] Write Protect is off
>[  170.956289] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
>[  170.957407] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[  170.963661]  sdd: sdd1
>[  170.967269] sd 5:0:0:0: [sdd] Attached SCSI removable disk
>[  173.751889] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.22-server-1.mga5 (iurt@rabbit.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Sep 24 22:24:44 UTC 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff2ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff30000-0x000000007ff3ffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ff40000-0x000000007ffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: ASUSTeK Computer Inc. K8V-MX/K8V-MX, BIOS 1008.013                 06/28/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ff30 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x00ce2000, 0x00ce2fff] PGTABLE
[    0.000000] BRK [0x00ce3000, 0x00ce3fff] PGTABLE
[    0.000000] BRK [0x00ce4000, 0x00ce4fff] PGTABLE
[    0.000000] BRK [0x00ce5000, 0x00ce5fff] PGTABLE
[    0.000000] BRK [0x00ce6000, 0x00ce6fff] PGTABLE
[    0.000000] BRK [0x00ce7000, 0x00ce7fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3763b000-0x37feffff]
[    0.000000] Allocated new RAMDISK: [mem 0x32842000-0x331f63b8]
[    0.000000] Move RAMDISK from [mem 0x3763b000-0x37fef3b8] to [mem 0x32842000-0x331f63b8]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA920 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x000000007FF30000 00002C (v01 A M I  OEMRSDT  06000528 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000007FF30200 000081 (v01 A M I  OEMFACP  06000528 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000007FF303E0 003944 (v01 A0023  A0023010 00000010 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x000000007FF40000 000040
[    0.000000] ACPI: APIC 0x000000007FF30390 00004A (v01 A M I  OEMAPIC  06000528 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1229MB HIGHMEM available.
[    0.000000] 817MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 331fe000
[    0.000000]   low ram: 0 - 331fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000331fdfff]
[    0.000000]   HighMem  [mem 0x00000000331fe000-0x000000007ff2ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff2ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff2ffff]
[    0.000000] On node 0 totalpages: 523982
[    0.000000] free_area_init_node: node 0, pgdat c0b56d40, node_mem_map f1442028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2005 pages used for memmap
[    0.000000]   Normal zone: 205310 pages, LIFO batch:31
[    0.000000]   HighMem zone: 314674 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f1423000 s47500 r0 d30324 u77824
[    0.000000] pcpu-alloc: s47500 r0 d30324 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521937
[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=88ced396-1409-4250-9dec-15c8320dbbb7 nokmsboot splash quiet noiswmd resume=UUID=259b8edd-e2c0-4733-ada9-164f03b009bf vga=788
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000331fe:0007ff30)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2052308K/2095928K available (6924K kernel code, 765K rwdata, 3004K rodata, 864K init, 528K bss, 43620K reserved, 0K cma-reserved, 1258696K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xff5b5000 - 0xfffff000   (10536 kB)
    pkmap   : 0xff200000 - 0xff400000   (2048 kB)
    vmalloc : 0xf39fe000 - 0xff1fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf31fe000   ( 817 MB)
      .init : 0xc0b75000 - 0xc0c4d000   ( 864 kB)
      .data : 0xc07c3584 - 0xc0b73540   (3775 kB)
      .text : 0xc0100000 - 0xc07c3584   (6925 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:8448 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f0c34000 soft=f0c36000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1800.088 MHz processor
[    0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.17 BogoMIPS (lpj=18000880)
[    0.010018] pid_max: default: 32768 minimum: 301
[    0.010029] ACPI: Core revision 20150930
[    0.015144] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.015168] Security Framework initialized
[    0.015174] TOMOYO Linux initialized
[    0.015193] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015196] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015508] Initializing cgroup subsys io
[    0.015516] Initializing cgroup subsys memory
[    0.015530] Initializing cgroup subsys devices
[    0.015535] Initializing cgroup subsys freezer
[    0.015540] Initializing cgroup subsys net_cls
[    0.015567] mce: CPU supports 5 MCE banks
[    0.015582] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.015584] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.027067] Freeing SMP alternatives memory: 28K (c0c4d000 - c0c54000)
[    0.030012] ftrace: allocating 27747 entries in 55 pages
[    0.050143] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.051131] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.160000] smpboot: CPU0: AMD Sempron(tm) Processor 3100+ (family: 0xf, model: 0x2c, stepping: 0x2)
[    0.160000] Performance Events: AMD PMU driver.
[    0.160000] ... version:                0
[    0.160000] ... bit width:              48
[    0.160000] ... generic registers:      4
[    0.160000] ... value mask:             0000ffffffffffff
[    0.160000] ... max period:             00007fffffffffff
[    0.160000] ... fixed-purpose events:   0
[    0.160000] ... event mask:             000000000000000f
[    0.160000] MCE: In-kernel MCE decoding enabled.
[    0.160000] x86: Booted up 1 node, 1 CPUs
[    0.160000] smpboot: Total of 1 processors activated (3600.17 BogoMIPS)
[    0.160000] devtmpfs: initialized
[    0.160000] PM: Registering ACPI NVS region [mem 0x7ff40000-0x7ffeffff] (720896 bytes)
[    0.160000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.160000] xor: measuring software checksum speed
[    0.250003]    pIII_sse  :  5557.600 MB/sec
[    0.350003]    prefetch64-sse:  5512.400 MB/sec
[    0.350005] xor: using function: pIII_sse (5557.600 MB/sec)
[    0.350015] pinctrl core: initialized pinctrl subsystem
[    0.350216] RTC time:  9:47:14, date: 10/17/16
[    0.350433] NET: Registered protocol family 16
[    0.350754] cpuidle: using governor ladder
[    0.350758] cpuidle: using governor menu
[    0.350766] node 0 link 0: io port [1000, ffffff]
[    0.350771] TOM: 0000000080000000 aka 2048M
[    0.350775] node 0 link 0: mmio [a0000, bffff]
[    0.350779] node 0 link 0: mmio [80000000, ffffffff]
[    0.350783] bus: [bus 00-ff] on node 0 link 0
[    0.350786] bus: 00 [io  0x0000-0xffff]
[    0.350788] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.350791] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.350898] ACPI: bus type PCI registered
[    0.350901] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.352684] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.352717] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[    0.352719] PCI: Using configuration type 1 for base access
[    0.520028] raid6: mmxx1    gen()  1513 MB/s
[    0.690018] raid6: mmxx2    gen()  2816 MB/s
[    0.860044] raid6: sse1x1   gen()   529 MB/s
[    1.030008] raid6: sse1x2   gen()   882 MB/s
[    1.200055] raid6: sse2x1   gen()   932 MB/s
[    1.370007] raid6: sse2x1   xor()  2010 MB/s
[    1.540042] raid6: sse2x2   gen()  1348 MB/s
[    1.710010] raid6: sse2x2   xor()  2177 MB/s
[    1.880012] raid6: int32x1  gen()   678 MB/s
[    2.050056] raid6: int32x1  xor()   443 MB/s
[    2.220063] raid6: int32x2  gen()   939 MB/s
[    2.390032] raid6: int32x2  xor()   623 MB/s
[    2.560042] raid6: int32x4  gen()   748 MB/s
[    2.730059] raid6: int32x4  xor()   525 MB/s
[    2.900022] raid6: int32x8  gen()   701 MB/s
[    3.070066] raid6: int32x8  xor()   465 MB/s
[    3.070068] raid6: using algorithm mmxx2 gen() 2816 MB/s
[    3.070070] raid6: using intx1 recovery algorithm
[    3.070286] ACPI: Added _OSI(Module Device)
[    3.070289] ACPI: Added _OSI(Processor Device)
[    3.070291] ACPI: Added _OSI(3.0 _SCP Extensions)
[    3.070294] ACPI: Added _OSI(Processor Aggregator Device)
[    3.072413] ACPI: Executed 1 blocks of module-level executable AML code
[    3.074611] ACPI: Interpreter enabled
[    3.074631] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    3.074651] ACPI: (supports S0 S1 S3 S4 S5)
[    3.074654] ACPI: Using IOAPIC for interrupt routing
[    3.074702] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    3.081932] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    3.081942] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    3.081950] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    3.081956] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    3.082195] PCI host bridge to bus 0000:00
[    3.082201] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    3.082204] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    3.082208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    3.082211] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff window]
[    3.082215] pci_bus 0000:00: root bus resource [bus 00-ff]
[    3.082232] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[    3.082254] pci 0000:00:00.0: reg 0x10: [mem 0xde000000-0xdfffffff pref]
[    3.082424] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[    3.082562] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[    3.082704] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[    3.082844] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[    3.082985] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[    3.083127] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[    3.083177] pci 0000:00:01.0: supports D1
[    3.083288] pci 0000:00:07.0: [1106:3044] type 00 class 0x0c0010
[    3.083310] pci 0000:00:07.0: reg 0x10: [mem 0xf9e00000-0xf9e007ff]
[    3.083320] pci 0000:00:07.0: reg 0x14: [io  0xe800-0xe87f]
[    3.083376] pci 0000:00:07.0: supports D2
[    3.083379] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
[    3.083500] pci 0000:00:0c.0: [14e4:4318] type 00 class 0x028000
[    3.083515] pci 0000:00:0c.0: reg 0x10: [mem 0xf9d00000-0xf9d01fff]
[    3.083664] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    3.083685] pci 0000:00:0f.0: reg 0x10: [io  0xe400-0xe407]
[    3.083695] pci 0000:00:0f.0: reg 0x14: [io  0xe000-0xe003]
[    3.083705] pci 0000:00:0f.0: reg 0x18: [io  0xd800-0xd807]
[    3.083715] pci 0000:00:0f.0: reg 0x1c: [io  0xd400-0xd403]
[    3.083725] pci 0000:00:0f.0: reg 0x20: [io  0xd000-0xd00f]
[    3.083735] pci 0000:00:0f.0: reg 0x24: [io  0xc800-0xc8ff]
[    3.083869] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    3.083917] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    3.083937] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    3.083940] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    3.083943] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    3.083946] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    3.084081] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    3.084128] pci 0000:00:10.0: reg 0x20: [io  0xb400-0xb41f]
[    3.084163] pci 0000:00:10.0: supports D1 D2
[    3.084166] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.084223] pci 0000:00:10.0: System wakeup disabled by ACPI
[    3.084296] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    3.084342] pci 0000:00:10.1: reg 0x20: [io  0xb800-0xb81f]
[    3.084377] pci 0000:00:10.1: supports D1 D2
[    3.084380] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    3.084438] pci 0000:00:10.1: System wakeup disabled by ACPI
[    3.084514] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    3.084560] pci 0000:00:10.2: reg 0x20: [io  0xc000-0xc01f]
[    3.084595] pci 0000:00:10.2: supports D1 D2
[    3.084598] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    3.084652] pci 0000:00:10.2: System wakeup disabled by ACPI
[    3.084730] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    3.084776] pci 0000:00:10.3: reg 0x20: [io  0xc400-0xc41f]
[    3.084811] pci 0000:00:10.3: supports D1 D2
[    3.084814] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    3.084869] pci 0000:00:10.3: System wakeup disabled by ACPI
[    3.084944] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    3.084965] pci 0000:00:10.4: reg 0x10: [mem 0xf9b00000-0xf9b000ff]
[    3.085025] pci 0000:00:10.4: supports D1 D2
[    3.085028] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    3.085082] pci 0000:00:10.4: System wakeup disabled by ACPI
[    3.085157] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    3.085221] HPET not enabled in BIOS. You might try hpet=force boot option
[    3.085228] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[    3.085358] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    3.085379] pci 0000:00:11.5: reg 0x10: [io  0xb000-0xb0ff]
[    3.085441] pci 0000:00:11.5: supports D1 D2
[    3.085494] pci 0000:00:11.5: System wakeup disabled by ACPI
[    3.085568] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
[    3.085588] pci 0000:00:11.6: reg 0x10: [io  0x0000-0x00ff]
[    3.085743] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    3.085764] pci 0000:00:12.0: reg 0x10: [io  0xa800-0xa8ff]
[    3.085774] pci 0000:00:12.0: reg 0x14: [mem 0xf9a00000-0xf9a000ff]
[    3.085829] pci 0000:00:12.0: supports D1 D2
[    3.085832] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.085886] pci 0000:00:12.0: System wakeup disabled by ACPI
[    3.085962] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    3.086077] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    3.086184] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    3.086294] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    3.086456] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
[    3.086473] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    3.086481] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff pref]
[    3.086489] pci 0000:01:00.0: reg 0x18: [mem 0xfa000000-0xfaffffff]
[    3.086509] pci 0000:01:00.0: reg 0x30: [mem 0xf9f00000-0xf9f1ffff pref]
[    3.086607] pci 0000:00:01.0: PCI bridge to [bus 01]
[    3.086614] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
[    3.086619] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
[    3.086627] pci_bus 0000:00: on NUMA node 0
[    3.087475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[    3.087550] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[    3.087622] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[    3.087695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    3.087768] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    3.087841] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    3.087914] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    3.087991] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    3.088317] vgaarb: setting as boot device: PCI:0000:01:00.0
[    3.088322] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    3.088324] vgaarb: loaded
[    3.088326] vgaarb: bridge control possible 0000:01:00.0
[    3.088344] sta2x11_scr_init
[    3.088361] sta2x11_apb_soc_regs_init
[    3.088375] sta2x11_sctl_init
[    3.088389] sta2x11_apbreg_init
[    3.088918] SCSI subsystem initialized
[    3.088990] libata version 3.00 loaded.
[    3.089198] PCI: Using ACPI for IRQ routing
[    3.089203] PCI: pci_cache_line_size set to 64 bytes
[    3.089265] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.089269] e820: reserve RAM buffer [mem 0x7ff30000-0x7fffffff]
[    3.089492] NetLabel: Initializing
[    3.089494] NetLabel:  domain hash size = 128
[    3.089496] NetLabel:  protocols = UNLABELED CIPSOv4
[    3.089514] NetLabel:  unlabeled traffic allowed by default
[    3.089658] clocksource: Switched to clocksource refined-jiffies
[    3.102826] pnp: PnP ACPI init
[    3.102952] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.103320] pnp 00:01: [dma 2]
[    3.103394] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[    3.103672] pnp 00:02: [dma 3]
[    3.103819] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    3.103962] pnp 00:03: disabling [io  0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103966] pnp 00:03: disabling [io  0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103970] pnp 00:03: disabling [io  0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103974] pnp 00:03: disabling [io  0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103977] pnp 00:03: disabling [io  0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103981] pnp 00:03: disabling [io  0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103985] pnp 00:03: disabling [io  0x0080] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103989] pnp 00:03: disabling [io  0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103993] pnp 00:03: disabling [io  0x0088] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.103997] pnp 00:03: disabling [io  0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.104001] pnp 00:03: disabling [io  0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.104005] pnp 00:03: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.104008] pnp 00:03: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io  0x0000-0x00ff]
[    3.104064] system 00:03: [io  0x0295-0x0296] has been reserved
[    3.104068] system 00:03: [io  0x03e1-0x03e7] has been reserved
[    3.104072] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    3.104075] system 00:03: [io  0x0800-0x087f] has been reserved
[    3.104079] system 00:03: [io  0x0400-0x041f] has been reserved
[    3.104084] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.104216] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    3.104220] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    3.104224] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[    3.104228] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.104556] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.104802] pnp 00:06: [dma 0 disabled]
[    3.104897] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.105141] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    3.105145] system 00:07: [mem 0x000c0000-0x000dffff] could not be reserved
[    3.105149] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    3.105153] system 00:07: [mem 0x00100000-0x7ffeffff] could not be reserved
[    3.105157] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    3.105325] pnp: PnP ACPI: found 8 devices
[    3.105334] PnPBIOS: Disabled by ACPI PNP
[    3.142582] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.142608] clocksource: Switched to clocksource acpi_pm
[    3.142647] pci 0000:00:11.6: BAR 0: assigned [io  0x1000-0x10ff]
[    3.142659] pci 0000:00:01.0: PCI bridge to [bus 01]
[    3.142665] pci 0000:00:01.0:   bridge window [mem 0xf9f00000-0xfbffffff]
[    3.142671] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf8ffffff pref]
[    3.142682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    3.142685] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    3.142689] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    3.142693] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff window]
[    3.142696] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xfbffffff]
[    3.142700] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf8ffffff pref]
[    3.142752] NET: Registered protocol family 2
[    3.142968] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    3.142996] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    3.143042] TCP: Hash tables configured (established 8192 bind 8192)
[    3.143094] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    3.143106] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    3.143179] NET: Registered protocol family 1
[    3.143201] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    3.143221] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    3.144296] pci 0000:01:00.0: Video device with shadowed ROM
[    3.144299] PCI: CLS 32 bytes, default 64
[    3.144468] Trying to unpack rootfs image as initramfs...
[    3.354835] Freeing initrd memory: 9940K (f2842000 - f31f7000)
[    3.354863] sta2x11_mfd_init
[    3.355042] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    3.355045] apm: overridden by ACPI.
[    3.355562] futex hash table entries: 256 (order: 2, 16384 bytes)
[    3.355602] audit: initializing netlink subsys (disabled)
[    3.355630] audit: type=2000 audit(1476697636.349:1): initialized
[    3.356112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.359732] zbud: loaded
[    3.359854] VFS: Disk quotas dquot_6.6.0
[    3.359937] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.361150] bounce: pool size: 64 pages
[    3.361235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.361275] io scheduler noop registered
[    3.361279] io scheduler deadline registered
[    3.361349] io scheduler cfq registered (default)
[    3.361680] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.361698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.361802] vesafb: mode is 800x600x16, linelength=1600, pages=2
[    3.361804] vesafb: protected mode interface info at c000:d3a0
[    3.361807] vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440
[    3.361809] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[    3.361823] vesafb: scrolling: redraw
[    3.361827] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    3.361855] vesafb: framebuffer at 0xe0000000, mapped to 0xf3c00000, using 1875k, total 262144k
[    3.384145] Console: switching to colour frame buffer device 100x37
[    3.405931] fb0: VESA VGA frame buffer device
[    3.406008] GHES: HEST is not enabled!
[    3.406048] isapnp: Scanning for PnP cards...
[    3.718668] isapnp: No Plug & Play device found
[    3.718804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.739314] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.759849] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.760387] Linux agpgart interface v0.103
[    3.760470] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    3.761671] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xde000000
[    3.767299] brd: module loaded
[    3.767783] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.768325] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.768336] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.768575] mousedev: PS/2 mouse device common for all mice
[    3.768633] rtc_cmos 00:00: RTC can wake from S4
[    3.768858] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.768904] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[    3.768965] ledtrig-cpu: registered to indicate activity on CPUs
[    3.769213] Key type dns_resolver registered
[    3.769431] microcode: AMD CPU family 0xf not supported
[    3.769451] Using IPI No-Shortcut mode
[    3.769652] registered taskstats version 1
[    3.769685] zswap: loaded using pool lzo/zbud
[    3.770609] Btrfs loaded
[    3.771024]   Magic number: 4:491:778
[    3.771140] rtc_cmos 00:00: setting system clock to 2016-10-17 09:47:17 UTC (1476697637)
[    3.771207] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[    3.771365] PM: Checking hibernation image partition UUID=259b8edd-e2c0-4733-ada9-164f03b009bf
[    3.826687] PM: Hibernation image not present or could not be loaded.
[    3.827508] Freeing unused kernel memory: 864K (c0b75000 - c0c4d000)
[    3.827632] Write protecting the kernel text: 6928k
[    3.827672] Write protecting the kernel read-only data: 3008k
[    3.827674] NX-protecting the kernel data: 6384k
[    3.919007] dracut: dracut-038
[    3.945981] sata_via 0000:00:0f.0: version 2.6
[    3.946193] sata_via 0000:00:0f.0: routed to hard irq line 10
[    3.947455] scsi host0: sata_via
[    3.947594] scsi host1: sata_via
[    3.947674] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
[    3.947677] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
[    4.150021] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    4.350022] tsc: Refined TSC clocksource calibration: 1800.063 MHz
[    4.350027] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f265276e5, max_idle_ns: 440795239467 ns
[    4.370014] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    4.385515] pata_via 0000:00:0f.1: version 0.3.4
[    4.387487] scsi host2: pata_via
[    4.387626] scsi host3: pata_via
[    4.387705] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    4.387708] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    4.580560] ata3.00: ATA-7: Maxtor 5A250J0, RAM51VV0, max UDMA/133
[    4.580564] ata3.00: 490234752 sectors, multi 16: LBA48 
[    4.580694] ata3.01: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[    4.580698] ata3.01: 156301488 sectors, multi 16: LBA 
[    4.620407] ata3.00: configured for UDMA/133
[    4.640320] ata3.01: configured for UDMA/100
[    4.640503] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 5A250J0   1VV0 PQ: 0 ANSI: 5
[    4.640890] sd 2:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
[    4.640959] sd 2:0:0:0: [sda] Write Protect is off
[    4.640963] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.640993] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.662169]  sda: sda1 sda2 sda3
[    4.662290] scsi 2:0:1:0: Direct-Access     ATA      WDC WD800JB-00JJ 1C05 PQ: 0 ANSI: 5
[    4.662629] sd 2:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    4.662773] sd 2:0:1:0: [sdb] Write Protect is off
[    4.662778] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    4.662810] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.675565]  sdb: sdb1
[    4.675770] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.676051] sd 2:0:1:0: [sdb] Attached SCSI disk
[    4.840406] ata4.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[    4.880276] ata4.00: configured for UDMA/66
[    4.882422] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
[    4.905344] Uniform Multi-Platform E-IDE driver
[    5.089938] random: systemd-udevd: uninitialized urandom read (16 bytes read, 17 bits of entropy available)
[    5.191130] dracut: Starting plymouth daemon
[    5.360140] clocksource: Switched to clocksource tsc
[    8.965731] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.965740] ACPI: Power Button [PWRB]
[    8.965837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.965840] ACPI: Power Button [PWRF]
[    9.060107] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    9.060115] cdrom: Uniform CD-ROM driver Revision: 3.20
[    9.070253] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    9.178618] ACPI: bus type USB registered
[    9.178670] usbcore: registered new interface driver usbfs
[    9.178692] usbcore: registered new interface driver hub
[    9.178728] usbcore: registered new device driver usb
[    9.180110] firewire_ohci 0000:00:07.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    9.256519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    9.257560] ehci-pci: EHCI PCI platform driver
[    9.257787] ehci-pci 0000:00:10.4: EHCI Host Controller
[    9.257798] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    9.257860] ehci-pci 0000:00:10.4: irq 21, io mem 0xf9b00000
[    9.286480] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    9.286611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.286616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.286619] usb usb1: Product: EHCI Host Controller
[    9.286622] usb usb1: Manufacturer: Linux 4.4.22-server-1.mga5 ehci_hcd
[    9.286625] usb usb1: SerialNumber: 0000:00:10.4
[    9.289099] hub 1-0:1.0: USB hub found
[    9.289115] hub 1-0:1.0: 8 ports detected
[    9.294281] uhci_hcd: USB Universal Host Controller Interface driver
[    9.294500] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    9.294511] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    9.294523] uhci_hcd 0000:00:10.0: detected 2 ports
[    9.294546] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[    9.310156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    9.310163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.310166] usb usb2: Product: UHCI Host Controller
[    9.310169] usb usb2: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
[    9.310172] usb usb2: SerialNumber: 0000:00:10.0
[    9.310420] hub 2-0:1.0: USB hub found
[    9.310897] hub 2-0:1.0: 2 ports detected
[    9.311264] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    9.311274] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    9.311283] uhci_hcd 0000:00:10.1: detected 2 ports
[    9.311306] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[    9.312112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    9.312118] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.312121] usb usb3: Product: UHCI Host Controller
[    9.312124] usb usb3: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
[    9.312127] usb usb3: SerialNumber: 0000:00:10.1
[    9.312996] hub 3-0:1.0: USB hub found
[    9.313012] hub 3-0:1.0: 2 ports detected
[    9.313331] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    9.313344] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    9.313353] uhci_hcd 0000:00:10.2: detected 2 ports
[    9.313376] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[    9.314168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    9.314174] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.314177] usb usb4: Product: UHCI Host Controller
[    9.314180] usb usb4: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
[    9.314183] usb usb4: SerialNumber: 0000:00:10.2
[    9.319590] hub 4-0:1.0: USB hub found
[    9.319621] hub 4-0:1.0: 2 ports detected
[    9.319956] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    9.319969] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    9.319978] uhci_hcd 0000:00:10.3: detected 2 ports
[    9.320001] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[    9.320877] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    9.320882] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.320885] usb usb5: Product: UHCI Host Controller
[    9.320888] usb usb5: Manufacturer: Linux 4.4.22-server-1.mga5 uhci_hcd
[    9.320891] usb usb5: SerialNumber: 0000:00:10.3
[    9.321126] hub 5-0:1.0: USB hub found
[    9.321140] hub 5-0:1.0: 2 ports detected
[    9.639237] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[    9.639245] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    9.639249] PM: Basic memory bitmaps created
[    9.641031] PM: Basic memory bitmaps freed
[    9.644773] PM: Starting manual resume from disk
[    9.644782] PM: Hibernation image partition 8:2 present
[    9.644784] PM: Looking for hibernation image.
[    9.655581] PM: Image not found (code -22)
[    9.655587] PM: Hibernation image not present or could not be loaded.
[    9.680248] firewire_core 0000:00:07.0: created device fw0: GUID 0011d8000023471e, S400
[    9.745589] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.800031] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    9.856191] dracut: Checking ext4: /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7
[    9.856470] dracut: issuing e2fsck -a  /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7
[    9.870055] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    9.936174] dracut: /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7: clean, 154544/801248 files, 1635416/3203072 blocks
[    9.939028] dracut: Mounting /dev/disk/by-uuid/88ced396-1409-4250-9dec-15c8320dbbb7 with -o relatime,acl
[    9.990982] usb 3-2: New USB device found, idVendor=046d, idProduct=c534
[    9.990989] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.990993] usb 3-2: Product: USB Receiver
[    9.990995] usb 3-2: Manufacturer: Logitech
[   10.014673] hidraw: raw HID events driver (C) Jiri Kosina
[   10.033428] usbcore: registered new interface driver usbhid
[   10.033434] usbhid: USB HID core driver
[   10.036603] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input4
[   10.077149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[   10.090356] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-2/input0
[   10.092085] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input5
[   10.150984] usb 1-7: New USB device found, idVendor=048d, idProduct=1336
[   10.150991] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.150994] usb 1-7: Product: Mass Storage Device
[   10.150997] usb 1-7: Manufacturer: Generic   
[   10.150999] usb 1-7: SerialNumber: 00000000000006
[   10.157174] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2/input1
[   10.163717] usb-storage 1-7:1.0: USB Mass Storage device detected
[   10.165765] scsi host4: usb-storage 1-7:1.0
[   10.165921] usbcore: registered new interface driver usb-storage
[   10.168299] usbcore: registered new interface driver uas
[   10.304832] dracut: Mounted root filesystem /dev/sda1
[   10.522413] dracut: Switching root
[   10.553388] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   11.134742] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
[   11.160599] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[   11.162333] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[   11.206399] random: systemd: uninitialized urandom read (16 bytes read, 87 bits of entropy available)
[   11.613312] NET: Registered protocol family 10
[   11.766841] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 97 bits of entropy available)
[   12.362153] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[   12.362287] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[   12.362629] random: systemd: uninitialized urandom read (16 bytes read, 104 bits of entropy available)
[   12.404392] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
[   12.435702] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
[   12.435755] random: systemd: uninitialized urandom read (16 bytes read, 105 bits of entropy available)
[   12.497239] random: systemd: uninitialized urandom read (16 bytes read, 106 bits of entropy available)
[   13.066813] systemd[1]: Cannot add dependency job for unit cups.service, ignoring: Unit cups.service failed to load: No such file or directory.
[   13.066828] systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit avahi-daemon.service failed to load: No such file or directory.
[   13.098231] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   13.818139] EXT4-fs (sda1): re-mounted. Opts: acl
[   14.694108] random: nonblocking pool is initialized
[   16.705759] powernow_k8: fid 0xa (1800 MHz), vid 0x6
[   16.705766] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[   16.705813] powernow_k8: Found 1 AMD Sempron(tm) Processor 3100+ (1 cpu cores) (version 2.20.00)
[   17.305845] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.426071] parport_pc 00:02: reported by Plug and Play ACPI
[   17.426172] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   17.497604] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[   17.790057] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[   17.790072] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[   17.790078] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[   17.790084] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[   17.790090] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[   17.870276] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0c.0
[   18.233128] EDAC MC: Ver: 3.0.0
[   18.260576] AMD64 EDAC driver v3.4.0
[   18.260628] EDAC amd64: DRAM ECC disabled.
[   18.260633] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[   18.299472] [drm] Initialized drm 1.1.0 20060810
[   18.539534] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[   18.540122] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1a800, 00:13:d4:39:0f:d3, IRQ 23
[   18.540900] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[   18.755721] ppdev: user-space parallel port driver
[   18.877491] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
[   19.695762] cfg80211: World regulatory domain updated:
[   19.695770] cfg80211:  DFS Master region: unset
[   19.695773] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   19.695777] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.695780] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   19.695783] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   19.695786] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   19.695790] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   19.695793] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   19.695796] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   19.695798] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   19.820099] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[   20.032740] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   20.095166] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   20.095189] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
[   20.114226] Broadcom 43xx driver loaded [ Features: PNLS ]
[   20.130473] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
[   20.562983] cfg80211: Regulatory domain changed to country: US
[   20.562991] cfg80211:  DFS Master region: FCC
[   20.562993] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.562997] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   20.563001] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   20.563004] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   20.563008] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[   20.563010] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   20.563013] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   20.589721] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   21.051962] Adding 8363004k swap on /dev/sda2.  Priority:-1 extents:1 across:8363004k FS
[   21.392945] nvidia: module license 'NVIDIA' taints kernel.
[   21.392954] Disabling lock debugging due to kernel taint
[   21.471366] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   21.472340] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   21.472354] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.131  Sun Nov  8 21:44:08 PST 2015
[   22.175884] systemd-journald[478]: Received request to flush runtime journal from PID 1
[   24.089589] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl
[   35.840291] IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
[   36.130032] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   36.150069] b43-phy0 debug: Chip initialized
[   36.150376] b43-phy0 debug: 32-bit DMA initialized
[   36.150415] b43-phy0 debug: QoS enabled
[   36.190381] b43-phy0 debug: Wireless interface started
[   36.210098] b43-phy0 debug: Adding Interface type 2
[   36.231968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.276077] b43-phy0 debug: Removing Interface type 2
[   36.276451] b43-phy0 debug: Wireless interface stopped
[   36.276459] b43-phy0 debug: DMA-32 rx_ring: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.276603] b43-phy0 debug: DMA-32 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.290069] b43-phy0 debug: DMA-32 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.310029] b43-phy0 debug: DMA-32 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.330062] b43-phy0 debug: DMA-32 tx_ring_AC_VO: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.350035] b43-phy0 debug: DMA-32 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[   36.550041] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   36.570053] b43-phy0 debug: Chip initialized
[   36.570354] b43-phy0 debug: 32-bit DMA initialized
[   36.570395] b43-phy0 debug: QoS enabled
[   36.610375] b43-phy0 debug: Wireless interface started
[   36.630071] b43-phy0 debug: Adding Interface type 2
[   36.650112] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   37.161631] NET: Registered protocol family 17
[   37.391475] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   37.391487] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   37.391545] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[   38.066258] NVRM: Your system is not currently configured to drive a VGA console
[   38.066267] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   38.066270] NVRM: requires the use of a text-mode VGA console. Use of other console
[   38.066273] NVRM: drivers including, but not limited to, vesafb, may result in
[   38.066276] NVRM: corruption and stability problems, and is not supported.
[   38.370965] wlan0: authenticate with 00:1d:7e:65:8e:00
[   38.400237] wlan0: send auth to 00:1d:7e:65:8e:00 (try 1/3)
[   38.401947] wlan0: authenticated
[   38.401986] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   38.401990] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   38.411335] wlan0: associate with 00:1d:7e:65:8e:00 (try 1/3)
[   38.413534] wlan0: RX AssocResp from 00:1d:7e:65:8e:00 (capab=0x411 status=0 aid=2)
[   38.413965] wlan0: associated
[   38.414026] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.498425] w83627hf: w83627hf: Found W83697HF chip at 0x290
[   38.666187] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:1d:7e:65:8e:00
[   38.666281] b43-phy0 debug: Using hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
[   44.663143] ip_tables: (C) 2000-2006 Netfilter Core Team
[   44.828304] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   48.789760] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   49.145196] Netfilter messages via NETLINK v0.30.
[   49.150411] ctnetlink v0.93: registering with nfnetlink.
[   52.317110] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   52.406503] xt_CT: No such helper "pptp"
[   52.420751] xt_CT: No such helper "irc"
[   52.429818] xt_CT: No such helper "irc-0"
[   52.465464] xt_CT: No such helper "snmp"
[   52.473588] xt_CT: No such helper "netbios-ns"
[   53.257656] xt_addrtype: ipv6 does not support BROADCAST matching
[   58.432572] ip_set: protocol 6
[   59.037740] netfilter PSD loaded - (c) astaro AG
[   59.171190] IFWLOG: register target
[   64.000017] Adjusting tsc more than 11% (10368863 vs 10345587)
[  151.780038] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  151.780046] ata3.00: BMDMA stat 0x64
[  151.780051] ata3.00: failed command: READ DMA EXT
[  151.780059] ata3.00: cmd 25/00:00:70:02:e3/00:01:15:00:00/e0 tag 0 dma 131072 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  151.780063] ata3.00: status: { DRDY ERR }
[  151.780066] ata3.00: error: { UNC }
[  151.840411] ata3.00: configured for UDMA/133
[  151.860344] ata3.01: configured for UDMA/100
[  151.860371] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  151.860376] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  151.860381] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  151.860386] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 02 70 00 01 00 00
[  151.860389] blk_update_request: I/O error, dev sda, sector 367199085
[  151.860422] ata3: EH complete
[  153.690092] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  153.690100] ata3.00: BMDMA stat 0x64
[  153.690104] ata3.00: failed command: READ DMA EXT
[  153.690113] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  153.690117] ata3.00: status: { DRDY ERR }
[  153.690119] ata3.00: error: { UNC }
[  153.750436] ata3.00: configured for UDMA/133
[  153.770375] ata3.01: configured for UDMA/100
[  153.770401] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  153.770407] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  153.770412] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  153.770417] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
[  153.770421] blk_update_request: I/O error, dev sda, sector 367199085
[  153.770448] ata3: EH complete
[  155.560037] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  155.560045] ata3.00: BMDMA stat 0x64
[  155.560049] ata3.00: failed command: READ DMA EXT
[  155.560057] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  155.560062] ata3.00: status: { DRDY ERR }
[  155.560064] ata3.00: error: { UNC }
[  155.620451] ata3.00: configured for UDMA/133
[  155.640327] ata3.01: configured for UDMA/100
[  155.640351] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  155.640357] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  155.640362] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  155.640367] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
[  155.640371] blk_update_request: I/O error, dev sda, sector 367199085
[  155.640404] ata3: EH complete
[  157.420041] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  157.420049] ata3.00: BMDMA stat 0x64
[  157.420054] ata3.00: failed command: READ DMA EXT
[  157.420062] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  157.420066] ata3.00: status: { DRDY ERR }
[  157.420068] ata3.00: error: { UNC }
[  157.480448] ata3.00: configured for UDMA/133
[  157.500327] ata3.01: configured for UDMA/100
[  157.500350] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  157.500355] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  157.500360] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  157.500366] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
[  157.500369] blk_update_request: I/O error, dev sda, sector 367199085
[  157.500403] ata3: EH complete
[  159.420041] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  159.420049] ata3.00: BMDMA stat 0x64
[  159.420054] ata3.00: failed command: READ DMA EXT
[  159.420062] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  159.420066] ata3.00: status: { DRDY ERR }
[  159.420069] ata3.00: error: { UNC }
[  159.480444] ata3.00: configured for UDMA/133
[  159.500350] ata3.01: configured for UDMA/100
[  159.500376] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  159.500382] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  159.500386] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  159.500392] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
[  159.500395] blk_update_request: I/O error, dev sda, sector 367199085
[  159.500427] ata3: EH complete
[  161.320048] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  161.320055] ata3.00: BMDMA stat 0x64
[  161.320060] ata3.00: failed command: READ DMA EXT
[  161.320068] ata3.00: cmd 25/00:08:68:03:e3/00:00:15:00:00/e0 tag 0 dma 4096 in
         res 51/40:00:6d:03:e3/40:00:15:00:00/e0 Emask 0x9 (media error)
[  161.320072] ata3.00: status: { DRDY ERR }
[  161.320074] ata3.00: error: { UNC }
[  161.400426] ata3.00: configured for UDMA/133
[  161.420348] ata3.01: configured for UDMA/100
[  161.420374] sd 2:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  161.420380] sd 2:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] [descriptor] 
[  161.420384] sd 2:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[  161.420390] sd 2:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 15 e3 03 68 00 00 08 00
[  161.420393] blk_update_request: I/O error, dev sda, sector 367199085
[  161.420427] ata3: EH complete
[  169.800021] usb 1-6: new high-speed USB device number 4 using ehci-pci
[  169.956784] usb 1-6: New USB device found, idVendor=058f, idProduct=6387
[  169.956791] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  169.956794] usb 1-6: Product: Mass Storage
[  169.956797] usb 1-6: Manufacturer: Generic
[  169.956800] usb 1-6: SerialNumber: 289CCFEB
[  169.958043] usb-storage 1-6:1.0: USB Mass Storage device detected
[  169.958287] scsi host5: usb-storage 1-6:1.0
[  170.952009] scsi 5:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[  170.955141] sd 5:0:0:0: [sdd] 16099328 512-byte logical blocks: (8.24 GB/7.68 GiB)
[  170.956280] sd 5:0:0:0: [sdd] Write Protect is off
[  170.956289] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[  170.957407] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  170.963661]  sdd: sdd1
[  170.967269] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[  173.751889] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Actions: View

Attachments on bug 19609: 8555 | 8556 | 8557