Attachment 843 Details for Bug 2831 – dmesg log with modified dsdt in initrd

dmesg log with modified dsdt in initrd

dmesg_modified-DSDT.log (text/x-log), 43.25 KB, created by Christian Lohmaier on 2011-09-26 18:06:59 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Christian Lohmaier

Created: 2011-09-26 18:06:59 CEST

Size: 43.25 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.8-netbook-5.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Wed Aug 31 23:18:27 UTC 2011
>Command line: BOOT_IMAGE=linux root=UUID=4d2a7b7b-a426-4e1c-8f5e-5ba1ab08f9f0 resume=UUID=434efc93-261d-4fff-aed2-4e700d326a65 splash=silent vga=788 acpi_backlight=vendor
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
> BIOS-e820: 00000000bf680000 - 00000000bf690000 (ACPI NVS)
> BIOS-e820: 00000000bf690000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI present.
>DMI: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0xbf680 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0BF700000 mask FFFF00000 uncachable
>  3 base 0BF800000 mask FFF800000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [ffff8800000f77a0] f77a0
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000bf680000
> 0000000000 - 00bf600000 page 2M
> 00bf600000 - 00bf680000 page 4k
>kernel direct mapping tables up to bf680000 @ 1fffb000-20000000
>RAMDISK: 37ba4000 - 37ff0000
>ACPI: RSDP 00000000000f7710 00024 (v02 PTLTD )
>ACPI: XSDT 00000000bf686ffd 0008C (v01 FSC    PC       06040000  LTP 00000000)
>ACPI: FACP 00000000bf68ed0c 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
>ACPI: DSDT 00000000bf688502 06796 (v02 IEC___ S11_____ 06040000 INTL 20050624)
>ACPI: FACS 00000000bf68ffc0 00040
>ACPI: APIC 00000000bf68ee00 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: HPET 00000000bf68ee68 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: MCFG 00000000bf68eea0 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: SLIT 00000000bf68eedc 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
>ACPI: TCPA 00000000bf68ef18 00032 (v01 Intel   CRESTLN 06040000      00005A52)
>ACPI: TMOR 00000000bf68ef4a 00026 (v01 PTLTD           06040000 PTL  00000003)
>ACPI: APIC 00000000bf68ef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: BOOT 00000000bf68efd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SSDT 00000000bf688225 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
>ACPI: SSDT 00000000bf687615 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
>ACPI: SSDT 00000000bf68756f 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
>ACPI: SSDT 00000000bf687089 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000bf680000
>Initmem setup node 0 0000000000000000-00000000bf680000
>  NODE_DATA [00000000bf67a000 - 00000000bf67efff]
> [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bbe00000-ffff8800be7fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000bf680
>On node 0 totalpages: 783887
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 10663 pages used for memmap
>  DMA32 zone: 769241 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff8800bf400000 s75776 r8192 d22528 u1048576
>pcpu-alloc: s75776 r8192 d22528 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773162
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=linux root=UUID=4d2a7b7b-a426-4e1c-8f5e-5ba1ab08f9f0 resume=UUID=434efc93-261d-4fff-aed2-4e700d326a65 splash=silent vga=788 acpi_backlight=vendor
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3079140k/3136000k available (3986k kernel code, 452k absent, 56408k reserved, 2916k data, 680k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:512
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>allocated 31457280 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>HPET config register value = 0xFFFFFFFF. Disabling HPET
>Fast TSC calibration using PIT
>Detected 1861.653 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.30 BogoMIPS (lpj=1861653)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>ACPI: Checking initramfs for custom DSDT
>ACPI: Found DSDT in DSDT.aml.
>ACPI: Core revision 20110112
>ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20110112/psloop-526)
>ftrace: allocating 15613 entries in 62 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Booting Node   0, Processors  #1 Ok.
>CPU1: Thermal monitoring handled by SMI
>Brought up 2 CPUs
>Total of 2 processors activated (7446.67 BogoMIPS).
>devtmpfs: initialized
>Time: 15:56:37  Date: 09/26/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: SSDT 00000000bf687ee3 0027A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 0027A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 00000000bf687874 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI: SSDT 00000000bf68815d 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 00000000bf687e5e 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>ACPI: EC: GPE storm detected, transactions will use polling mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [FN00] (on)
>ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
>pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
>pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
>pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x1c00-0x1c07]
>pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
>pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xfc406000-0xfc4063ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
>pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
>pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
>pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xfc406400-0xfc4067ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f)
>pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0x1830-0x183f]
>pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x1c18-0x1c1f]
>pci 0000:00:1f.2: reg 14: [io  0x1c0c-0x1c0f]
>pci 0000:00:1f.2: reg 18: [io  0x1c10-0x1c17]
>pci 0000:00:1f.2: reg 1c: [io  0x1c08-0x1c0b]
>pci 0000:00:1f.2: reg 20: [io  0x1c20-0x1c3f]
>pci 0000:00:1f.2: reg 24: [mem 0xfc405000-0xfc4057ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
>pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci 0000:04:00.0: [11ab:4363] type 0 class 0x000200
>pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8003fff 64bit]
>pci 0000:04:00.0: reg 18: [io  0x3000-0x30ff]
>pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci 0000:06:00.0: [168c:001c] type 0 class 0x000200
>pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa00ffff 64bit]
>pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.2: PCI bridge to [bus 06-07]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 00000000bf680000 - 00000000bfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0xc0000000-0xfebfffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:01: [mem 0xfed14000-0xfed17fff]
>pnp 00:01: [mem 0xfed18000-0xfed18fff]
>pnp 00:01: [mem 0xfed19000-0xfed19fff]
>pnp 00:01: [mem 0xe0000000-0xefffffff]
>pnp 00:01: [mem 0xfed20000-0xfed3ffff]
>pnp 00:01: [mem 0xfed40000-0xfed44fff]
>pnp 00:01: [mem 0xfed45000-0xfed8ffff]
>system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0000-0x001f]
>pnp 00:02: [io  0x0081-0x0091]
>pnp 00:02: [io  0x0093-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [mem 0xff000000-0xffffffff]
>pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:04: [io  0x00f0]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0200-0x020f]
>pnp 00:05: [io  0x0400-0x040f]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x0800-0x080f]
>pnp 00:05: [io  0x1000-0x107f]
>pnp 00:05: [io  0x1180-0x11bf]
>pnp 00:05: [io  0x1640-0x164f]
>pnp 00:05: [io  0xfe00]
>system 00:05: [io  0x0200-0x020f] has been reserved
>system 00:05: [io  0x0400-0x040f] has been reserved
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x0800-0x080f] has been reserved
>system 00:05: [io  0x1000-0x107f] has been reserved
>system 00:05: [io  0x1180-0x11bf] has been reserved
>system 00:05: [io  0x1640-0x164f] has been reserved
>system 00:05: [io  0xfe00] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x06a0-0x06af]
>pnp 00:06: [io  0x06b0-0x06ff]
>system 00:06: [io  0x06a0-0x06af] has been reserved
>system 00:06: [io  0x06b0-0x06ff] has been reserved
>system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:07: [io  0x0070-0x0077]
>pnp 00:07: [irq 8]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 3]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0378-0x037f]
>pnp 00:09: [irq 5]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 1]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:0b: [irq 12]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
>pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff])
>pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci 0000:04:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
>pci 0000:00:1c.1: PCI bridge to [bus 04-05]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 06-07]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 08-08]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: enabling device (0000 -> 0003)
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: enabling device (0000 -> 0003)
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
>pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
>pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
>pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
>pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
>pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
>pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:08: resource 10 [mem 0xc0000000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4400k freed
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1317052598.879:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 6022
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 1875k, total 7616k
>vesafb: mode is 800x600x16, linelength=1600, pages=6
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>intel_idle: MWAIT substates: 0x1110
>intel_idle: does not run on family 6 model 15
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>PM: Checking hibernation image partition UUID=434efc93-261d-4fff-aed2-4e700d326a65
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>Refined TSC clocksource calibration: 1861.999 MHz.
>Switching to clocksource tsc
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 11:454:943
>tty tty0: hash matches
>tty console: hash matches
>rtc_cmos 00:07: setting system clock to 2011-09-26 15:56:40 UTC (1317052600)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 680k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 92k freed
>Freeing unused kernel memory: 104k freed
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID0]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] initialized overlay support
>fixme: max PWM is zero.
>checking generic (d0000000 770000) vs hw (d0000000 10000000)
>fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 44
>ata2: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 44
>ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 44
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1.00: unexpected _GTF length (8)
>ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: unexpected _GTF length (8)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
>ata4.00: ATAPI: Optiarc DVD RW AD-7590A, 1.43, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.43 PQ: 0 ANSI: 5
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>video LNXVIDEO:00: Restoring backlight state
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev[110]: starting version 166
>ACPI: acpi_idle registered with cpuidle
>ACPI: AC Adapter [ADP1] (on-line)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Fan [FAN0] (on)
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (27 C)
>ACPI: Invalid active1 threshold
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (72 C)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc406000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.8-netbook-5.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc406400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.8-netbook-5.mga ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb 1-2: New USB device found, idVendor=05e3, idProduct=0715
>usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
>usb 1-2: Product: USB Storage
>usb 1-2: Manufacturer: Generic 
>usb 1-2: SerialNumber: 000000009412
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
>usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
>usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ppdev: user-space parallel port driver
>Initializing USB Mass Storage driver...
>scsi5 : usb-storage 1-2:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver uas
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>Non-volatile memory driver v1.3
>EXT4-fs (sda5): re-mounted. Opts: acl
>scsi 5:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9412 PQ: 0 ANSI: 0
>sd 5:0:0:0: [sdb] Attached SCSI removable disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
>fuse init (API version 7.16)
>Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k 
>atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0).
>atkbd serio0: Use 'setkeycodes e003 <keycode>' to make it known.
>NET: Registered protocol family 10
>ata1.00: configured for UDMA/133
>ata1: EH complete
>chrome-sandbox (1279): /proc/1277/oom_adj is deprecated, please use /proc/1277/oom_score_adj instead.
>EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ACPI: resource 0000:00:1f.3 [io  0x18e0-0x18ff] conflicts with ACPI region SMBI [io 0x18e0-0x18ef]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>sky2: driver version 1.28
>sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sky2 0000:04:00.0: setting latency timer to 64
>sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
>sky2 0000:04:00.0: irq 45 for MSI/MSI-X
>sky2 0000:04:00.0: eth0: addr 00:a0:d1:cd:a6:f5
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>ath5k 0000:06:00.0: enabling device (0104 -> 0106)
>ath5k 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ath5k 0000:06:00.0: setting latency timer to 64
>ath5k 0000:06:00.0: registered as 'phy0'
>ath: EEPROM regdomain: 0x30
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: AM
>ath: Regpair used: 0x30
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC262: SKU not ready 0x598301f0
>hda_codec: ALC262: BIOS auto-probing.
>autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>   speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   inputs:
>realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
>realtek: Enable default setup for auto mode as fallback
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>cfg80211: Calling CRDA for country: AM
>Registered led device: ath5k-phy0::rx
>Registered led device: ath5k-phy0::tx
>ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>cfg80211: Regulatory domain changed to country: AM
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 offMin=0x1b2 offMax=0xad40
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.0.6_OSE (interface 0x00180000).
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>sky2 0000:04:00.0: eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>wlan0: direct probe to 00:1c:4a:05:49:85 (try 1/3)
>wlan0: direct probe responded
>wlan0: authenticate with 00:1c:4a:05:49:85 (try 1)
>wlan0: authenticated
>wlan0: associate with 00:1c:4a:05:49:85 (try 1)
>wlan0: RX AssocResp from 00:1c:4a:05:49:85 (capab=0x411 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>padlock_aes: VIA PadLock not detected.
>Intel AES-NI instructions are not detected.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
>Netfilter messages via NETLINK v0.30.
>ip_set: protocol 6
>xt_time: kernel timezone is +0200
>wlan0: no IPv6 routers present

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-netbook-5.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Wed Aug 31 23:18:27 UTC 2011
Command line: BOOT_IMAGE=linux root=UUID=4d2a7b7b-a426-4e1c-8f5e-5ba1ab08f9f0 resume=UUID=434efc93-261d-4fff-aed2-4e700d326a65 splash=silent vga=788 acpi_backlight=vendor
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
 BIOS-e820: 00000000bf680000 - 00000000bf690000 (ACPI NVS)
 BIOS-e820: 00000000bf690000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: FUJITSU SIEMENS ESPRIMO Mobile U9200/S11D, BIOS 1.11 - 067 - 1566 04/22/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xbf680 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BF700000 mask FFFF00000 uncachable
  3 base 0BF800000 mask FFF800000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f77a0] f77a0
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf680000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf680000 page 4k
kernel direct mapping tables up to bf680000 @ 1fffb000-20000000
RAMDISK: 37ba4000 - 37ff0000
ACPI: RSDP 00000000000f7710 00024 (v02 PTLTD )
ACPI: XSDT 00000000bf686ffd 0008C (v01 FSC    PC       06040000  LTP 00000000)
ACPI: FACP 00000000bf68ed0c 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bf688502 06796 (v02 IEC___ S11_____ 06040000 INTL 20050624)
ACPI: FACS 00000000bf68ffc0 00040
ACPI: APIC 00000000bf68ee00 00068 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET 00000000bf68ee68 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bf68eea0 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIT 00000000bf68eedc 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA 00000000bf68ef18 00032 (v01 Intel   CRESTLN 06040000      00005A52)
ACPI: TMOR 00000000bf68ef4a 00026 (v01 PTLTD           06040000 PTL  00000003)
ACPI: APIC 00000000bf68ef70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 00000000bf68efd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 00000000bf688225 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 00000000bf687615 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bf68756f 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bf687089 004E6 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000bf680000
Initmem setup node 0 0000000000000000-00000000bf680000
  NODE_DATA [00000000bf67a000 - 00000000bf67efff]
 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bbe00000-ffff8800be7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000bf680
On node 0 totalpages: 783887
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3921 pages, LIFO batch:0
  DMA32 zone: 10663 pages used for memmap
  DMA32 zone: 769241 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff8800bf400000 s75776 r8192 d22528 u1048576
pcpu-alloc: s75776 r8192 d22528 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 773162
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=linux root=UUID=4d2a7b7b-a426-4e1c-8f5e-5ba1ab08f9f0 resume=UUID=434efc93-261d-4fff-aed2-4e700d326a65 splash=silent vga=788 acpi_backlight=vendor
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3079140k/3136000k available (3986k kernel code, 452k absent, 56408k reserved, 2916k data, 680k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
HPET config register value = 0xFFFFFFFF. Disabling HPET
Fast TSC calibration using PIT
Detected 1861.653 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.30 BogoMIPS (lpj=1861653)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Checking initramfs for custom DSDT
ACPI: Found DSDT in DSDT.aml.
ACPI: Core revision 20110112
ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20110112/psloop-526)
ftrace: allocating 15613 entries in 62 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1 Ok.
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7446.67 BogoMIPS).
devtmpfs: initialized
Time: 15:56:37  Date: 09/26/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bf687ee3 0027A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0027A (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bf687874 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 00000000bf68815d 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bf687e5e 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (on)
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x1c00-0x1c07]
pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0x1840-0x185f]
pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0x1860-0x187f]
pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfc406000-0xfc4063ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfc406400-0xfc4067ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 000f)
pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1830-0x183f]
pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x1c18-0x1c1f]
pci 0000:00:1f.2: reg 14: [io  0x1c0c-0x1c0f]
pci 0000:00:1f.2: reg 18: [io  0x1c10-0x1c17]
pci 0000:00:1f.2: reg 1c: [io  0x1c08-0x1c0b]
pci 0000:00:1f.2: reg 20: [io  0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24: [mem 0xfc405000-0xfc4057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: [11ab:4363] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8003fff 64bit]
pci 0000:04:00.0: reg 18: [io  0x3000-0x30ff]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:06:00.0: [168c:001c] type 0 class 0x000200
pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa00ffff 64bit]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 00000000bf680000 - 00000000bfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xc0000000-0xfebfffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xfed18000-0xfed18fff]
pnp 00:01: [mem 0xfed19000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: [mem 0xfed45000-0xfed8ffff]
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0000-0x001f]
pnp 00:02: [io  0x0081-0x0091]
pnp 00:02: [io  0x0093-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [io  0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0200-0x020f]
pnp 00:05: [io  0x0400-0x040f]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x0800-0x080f]
pnp 00:05: [io  0x1000-0x107f]
pnp 00:05: [io  0x1180-0x11bf]
pnp 00:05: [io  0x1640-0x164f]
pnp 00:05: [io  0xfe00]
system 00:05: [io  0x0200-0x020f] has been reserved
system 00:05: [io  0x0400-0x040f] has been reserved
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x1000-0x107f] has been reserved
system 00:05: [io  0x1180-0x11bf] has been reserved
system 00:05: [io  0x1640-0x164f] has been reserved
system 00:05: [io  0xfe00] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x06a0-0x06af]
pnp 00:06: [io  0x06b0-0x06ff]
system 00:06: [io  0x06a0-0x06af] has been reserved
system 00:06: [io  0x06b0-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x0378-0x037f]
pnp 00:09: [irq 5]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff] (PCI address [0xc0000000-0xc00000ff])
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0003)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:08: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4400k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1317052598.879:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 6022
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 1875k, total 7616k
vesafb: mode is 800x600x16, linelength=1600, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1110
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=434efc93-261d-4fff-aed2-4e700d326a65
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Refined TSC clocksource calibration: 1861.999 MHz.
Switching to clocksource tsc
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 11:454:943
tty tty0: hash matches
tty console: hash matches
rtc_cmos 00:07: setting system clock to 2011-09-26 15:56:40 UTC (1317052600)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 680k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 92k freed
Freeing unused kernel memory: 104k freed
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
fixme: max PWM is zero.
checking generic (d0000000 770000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405180 irq 44
ata3: SATA max UDMA/133 abar m2048@0xfc405000 port 0xfc405200 irq 44
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata4.00: ATAPI: Optiarc DVD RW AD-7590A, 1.43, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.43 PQ: 0 ANSI: 5
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[110]: starting version 166
ACPI: acpi_idle registered with cpuidle
ACPI: AC Adapter [ADP1] (on-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Fan [FAN0] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (27 C)
ACPI: Invalid active1 threshold
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (72 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc406000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-netbook-5.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc406400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-netbook-5.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.38.8-netbook-5.mga uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: New USB device found, idVendor=05e3, idProduct=0715
usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
usb 1-2: Product: USB Storage
usb 1-2: Manufacturer: Generic 
usb 1-2: SerialNumber: 000000009412
usb 4-2: new full speed USB device using uhci_hcd and address 2
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi5 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
Non-volatile memory driver v1.3
EXT4-fs (sda5): re-mounted. Opts: acl
scsi 5:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9412 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k 
atkbd serio0: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e003 <keycode>' to make it known.
NET: Registered protocol family 10
ata1.00: configured for UDMA/133
ata1: EH complete
chrome-sandbox (1279): /proc/1277/oom_adj is deprecated, please use /proc/1277/oom_score_adj instead.
EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0x18e0-0x18ff] conflicts with ACPI region SMBI [io 0x18e0-0x18ef]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
sky2: driver version 1.28
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:04:00.0: irq 45 for MSI/MSI-X
sky2 0000:04:00.0: eth0: addr 00:a0:d1:cd:a6:f5
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
ath5k 0000:06:00.0: enabling device (0104 -> 0106)
ath5k 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:06:00.0: setting latency timer to 64
ath5k 0000:06:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x30
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AM
ath: Regpair used: 0x30
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x598301f0
hda_codec: ALC262: BIOS auto-probing.
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: Calling CRDA for country: AM
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
cfg80211: Regulatory domain changed to country: AM
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1b2 offMax=0xad40
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.6_OSE (interface 0x00180000).
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
sky2 0000:04:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: direct probe to 00:1c:4a:05:49:85 (try 1/3)
wlan0: direct probe responded
wlan0: authenticate with 00:1c:4a:05:49:85 (try 1)
wlan0: authenticated
wlan0: associate with 00:1c:4a:05:49:85 (try 1)
wlan0: RX AssocResp from 00:1c:4a:05:49:85 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock_aes: VIA PadLock not detected.
Intel AES-NI instructions are not detected.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0200
wlan0: no IPv6 routers present

Actions: View

Attachments on bug 2831: 843