Attachment 8316 Details for Bug 18995 – Verbose lsusb output for soloHD

Verbose lsusb output for soloHD

lsusb-verbose (text/plain), 2.66 KB, created by Len Lawrence on 2016-08-06 19:51:27 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Len Lawrence

Created: 2016-08-06 19:51:27 CEST

Size: 2.66 KB

patch

obsolete

>This is what lsusb reports in verbose mode:
>$ lsusb -vvd 2040:0264
>
>Bus 003 Device 007: ID 2040:0264 Hauppauge 
>Couldn't open device, some information will be missing
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            0 
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  idVendor           0x2040 Hauppauge
>  idProduct          0x0264 
>  bcdDevice            1.00
>  iManufacturer           3 
>  iProduct                1 
>  iSerial                 2 
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           41
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0x80
>      (Bus Powered)
>    MaxPower              500mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass       255 Vendor Specific Class
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x84  EP 4 IN
>        bmAttributes            1
>          Transfer Type            Isochronous
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0000  1x 0 bytes
>        bInterval               1
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       1
>      bNumEndpoints           1
>      bInterfaceClass       255 Vendor Specific Class
>      bInterfaceSubClass      0 
>      bInterfaceProtocol      0 
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x84  EP 4 IN
>        bmAttributes            1
>          Transfer Type            Isochronous
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x03ac  1x 940 bytes
>        bInterval               1
>
>It loses the tail end which should look something like this:
>Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  bNumConfigurations      1
>Device Status:     0x0000
>  (Bus Powered)

This is what lsusb reports in verbose mode:
$ lsusb -vvd 2040:0264

Bus 003 Device 007: ID 2040:0264 Hauppauge 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x2040 Hauppauge
  idProduct          0x0264 
  bcdDevice            1.00
  iManufacturer           3 
  iProduct                1 
  iSerial                 2 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0000  1x 0 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            1
          Transfer Type            Isochronous
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x03ac  1x 940 bytes
        bInterval               1

It loses the tail end which should look something like this:
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Actions: View

Attachments on bug 18995: 8314 | 8315 | 8316 | 8317 | 8318 | 8319 | 9574 | 10338 | 10339