Attachment 7976 Details for Bug 18662 – syslog

syslog

syslog (text/plain), 70.38 KB, created by Frank Griffin on 2016-06-11 21:03:28 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Griffin

Created: 2016-06-11 21:03:28 CEST

Size: 70.38 KB

patch

obsolete

>] kernel/system logger ok
><6>[    0.000000] microcode: microcode updated early to revision 0x4, date = 2013-06-28
><5>[    0.000000] Linux version 4.6.2-desktop-1.mga6 (iurt@rabbit.mageia.org) (gcc version 5.4.0 (GCC) ) #1 SMP Fri Jun 10 08:32:33 UTC 2016
><6>[    0.000000] Command line: BOOT_IMAGE=x86_64/vmlinuz initrd=x86_64/all.rdz  noiswmd vga=788 splash quiet
><6>[    0.000000] x86/fpu: Legacy x87 FPU detected.
><6>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
><6>[    0.000000] e820: BIOS-provided physical RAM map:
><6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000095bff] usable
><6>[    0.000000] BIOS-e820: [mem 0x0000000000095c00-0x000000000009ffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf65efff] usable
><6>[    0.000000] BIOS-e820: [mem 0x00000000cf65f000-0x00000000cf67efff] ACPI data
><6>[    0.000000] BIOS-e820: [mem 0x00000000cf67f000-0x00000000cf76efff] ACPI NVS
><6>[    0.000000] BIOS-e820: [mem 0x00000000cf76f000-0x00000000cfffffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
><6>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff] usable
><6>[    0.000000] NX (Execute Disable) protection: active
><6>[    0.000000] SMBIOS 2.6 present.
><7>[    0.000000] DMI: Dell Inc. Latitude E6510/0N5KHN, BIOS A06 11/20/2010
><7>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
><7>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
><6>[    0.000000] e820: last_pfn = 0x12c000 max_arch_pfn = 0x400000000
><7>[    0.000000] MTRR default type: uncachable
><7>[    0.000000] MTRR fixed ranges enabled:
><7>[    0.000000]   00000-9FFFF write-back
><7>[    0.000000]   A0000-BFFFF uncachable
><7>[    0.000000]   C0000-FFFFF write-protect
><7>[    0.000000] MTRR variable ranges enabled:
><7>[    0.000000]   0 base 000000000 mask F80000000 write-back
><7>[    0.000000]   1 base 080000000 mask FC0000000 write-back
><7>[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
><7>[    0.000000]   3 base 100000000 mask FE0000000 write-back
><7>[    0.000000]   4 base 120000000 mask FF0000000 write-back
><7>[    0.000000]   5 base 12C000000 mask FFC000000 uncachable
><7>[    0.000000]   6 disabled
><7>[    0.000000]   7 disabled
><6>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
><7>[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
><6>[    0.000000] e820: last_pfn = 0xcf65f max_arch_pfn = 0x400000000
><6>[    0.000000] found SMP MP-table at [mem 0x000f2200-0x000f220f] mapped at [ffff8800000f2200]
><7>[    0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 24576
><7>[    0.000000] BRK [0x01f47000, 0x01f47fff] PGTABLE
><7>[    0.000000] BRK [0x01f48000, 0x01f48fff] PGTABLE
><7>[    0.000000] BRK [0x01f49000, 0x01f49fff] PGTABLE
><7>[    0.000000] BRK [0x01f4a000, 0x01f4afff] PGTABLE
><6>[    0.000000] RAMDISK: [mem 0x7d4bf000-0x7fffffff]
><6>[    0.000000] ACPI: Early table checksum verification disabled
><4>[    0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL  )
><4>[    0.000000] ACPI: XSDT 0x00000000CF67DE18 000064 (v01 DELL   E2       06222004 MSFT 00010013)
><4>[    0.000000] ACPI: FACP 0x00000000CF75FC18 0000F4 (v04 DELL   E2       06222004 MSFT 00010013)
><4>[    0.000000] ACPI: DSDT 0x00000000CF73E018 00A6C0 (v01 DELL   E2       00001001 INTL 20080729)
><4>[    0.000000] ACPI: FACS 0x00000000CF76BF40 000040
><4>[    0.000000] ACPI: FACS 0x00000000CF76ED40 000040
><4>[    0.000000] ACPI: APIC 0x00000000CF67CF18 00008C (v02 DELL   E2       06222004 MSFT 00010013)
><4>[    0.000000] ACPI: TCPA 0x00000000CF76DD18 000032 (v02                 00000000      00000000)
><4>[    0.000000] ACPI: MCFG 0x00000000CF76DC98 00003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
><4>[    0.000000] ACPI: HPET 0x00000000CF76DC18 000038 (v01 DELL   E2       00000001 ASL  00000061)
><4>[    0.000000] ACPI: BOOT 0x00000000CF76DB98 000028 (v01 DELL   E2       06222004 AMI  00010013)
><4>[    0.000000] ACPI: SLIC 0x00000000CF766818 000176 (v03 DELL   E2       06222004 MSFT 00010013)
><4>[    0.000000] ACPI: SSDT 0x00000000CF74D018 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20080729)
><7>[    0.000000] ACPI: Local APIC address 0xfee00000
><6>[    0.000000] No NUMA configuration found
><6>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012bffffff]
><6>[    0.000000] NODE_DATA(0) allocated [mem 0x12bff8000-0x12bffbfff]
><6>[    0.000000] Zone ranges:
><6>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
><6>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
><6>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012bffffff]
><6>[    0.000000] Movable zone start for each node
><6>[    0.000000] Early memory node ranges
><6>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000094fff]
><6>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cf65efff]
><6>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012bffffff]
><6>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012bffffff]
><7>[    0.000000] On node 0 totalpages: 1029619
><7>[    0.000000]   DMA zone: 64 pages used for memmap
><7>[    0.000000]   DMA zone: 21 pages reserved
><7>[    0.000000]   DMA zone: 3988 pages, LIFO batch:0
><7>[    0.000000]   DMA32 zone: 13210 pages used for memmap
><7>[    0.000000]   DMA32 zone: 845407 pages, LIFO batch:31
><7>[    0.000000]   Normal zone: 2816 pages used for memmap
><7>[    0.000000]   Normal zone: 180224 pages, LIFO batch:31
><6>[    0.000000] ACPI: PM-Timer IO Port: 0x408
><7>[    0.000000] ACPI: Local APIC address 0xfee00000
><6>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
><6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>[    0.000000] ACPI: IRQ0 used by override.
><7>[    0.000000] ACPI: IRQ9 used by override.
><6>[    0.000000] Using ACPI (MADT) for SMP configuration information
><6>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
><6>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
><6>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xcf65f000-0xcf67efff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xcf67f000-0xcf76efff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xcf76f000-0xcfffffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
><6>[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
><6>[    0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
><6>[    0.000000] Booting paravirtualized kernel on bare hardware
><6>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
><6>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
><6>[    0.000000] percpu: Embedded 33 pages/cpu @ffff88012bc00000 s96536 r8192 d30440 u262144
><7>[    0.000000] pcpu-alloc: s96536 r8192 d30440 u262144 alloc=1*2097152
><7>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
><6>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013508
><6>[    0.000000] Policy zone: Normal
><5>[    0.000000] Kernel command line: BOOT_IMAGE=x86_64/vmlinuz initrd=x86_64/all.rdz  noiswmd vga=788 splash quiet
><6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
><7>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
><7>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>[    0.000000] Memory: 3925504K/4118476K available (7177K kernel code, 1150K rwdata, 3328K rodata, 1352K init, 812K bss, 192972K reserved, 0K cma-reserved)
><6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
><6>[    0.000000] Hierarchical RCU implementation.
><6>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
><6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
><6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
><6>[    0.000000] NR_IRQS:4352 nr_irqs:488 16
><6>[    0.000000] Console: colour dummy device 80x25
><6>[    0.000000] console [tty0] enabled
><6>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
><7>[    0.000000] hpet clockevent registered
><6>[    0.000000] tsc: Fast TSC calibration using PIT
><7>[    0.000000] spurious 8259A interrupt: IRQ7.
><6>[    0.000000] tsc: Detected 2660.236 MHz processor
><6>[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.47 BogoMIPS (lpj=2660236)
><6>[    0.000034] pid_max: default: 32768 minimum: 301
><6>[    0.000038] ACPI: Core revision 20160108
><4>[    0.007070] ACPI: 2 ACPI AML tables successfully acquired and loaded
><4>[    0.007072] 
><6>[    0.007090] Security Framework initialized
><6>[    0.007092] TOMOYO Linux initialized
><6>[    0.007323] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><6>[    0.008313] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>[    0.008746] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
><6>[    0.008751] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
><6>[    0.009020] CPU: Physical Processor ID: 0
><6>[    0.009022] CPU: Processor Core ID: 0
><6>[    0.009028] mce: CPU supports 9 MCE banks
><6>[    0.009042] process: using mwait in idle threads
><6>[    0.009046] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
><6>[    0.009047] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
><6>[    0.009363] Freeing SMP alternatives memory: 28K (ffffffff81e73000 - ffffffff81e7a000)
><6>[    0.011658] ftrace: allocating 27673 entries in 109 pages
><6>[    0.023482] smpboot: Max logical packages: 4
><6>[    0.023486] smpboot: APIC(0) Converting physical 0 to logical package 0
><6>[    0.023900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
><6>[    0.135755] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 560  @ 2.67GHz (family: 0x6, model: 0x25, stepping: 0x5)
><6>[    0.135774] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
><4>[    0.135790] core: CPUID marked event: 'bus cycles' unavailable
><6>[    0.135793] ... version:                3
><6>[    0.135793] ... bit width:              48
><6>[    0.135794] ... generic registers:      4
><6>[    0.135795] ... value mask:             0000ffffffffffff
><6>[    0.135796] ... max period:             000000007fffffff
><6>[    0.135797] ... fixed-purpose events:   3
><6>[    0.135797] ... event mask:             000000070000000f
><6>[    0.136336] x86: Booting SMP configuration:
><6>[    0.136338] .... node  #0, CPUs:      #1 #2 #3
><6>[    0.322792] x86: Booted up 1 node, 4 CPUs
><6>[    0.322798] smpboot: Total of 4 processors activated (21279.59 BogoMIPS)
><6>[    0.325279] devtmpfs: initialized
><6>[    0.325340] x86/mm: Memory block size: 128MB
><6>[    0.327399] PM: Registering ACPI NVS region [mem 0xcf67f000-0xcf76efff] (983040 bytes)
><6>[    0.327480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
><6>[    0.327537] xor: measuring software checksum speed
><6>[    0.336725]    prefetch64-sse: 15288.000 MB/sec
><6>[    0.346723]    generic_sse: 13096.000 MB/sec
><6>[    0.346724] xor: using function: prefetch64-sse (15288.000 MB/sec)
><6>[    0.346731] pinctrl core: initialized pinctrl subsystem
><6>[    0.346840] RTC time: 18:03:26, date: 06/11/16
><6>[    0.346944] NET: Registered protocol family 16
><6>[    0.350729] cpuidle: using governor ladder
><6>[    0.354727] cpuidle: using governor menu
><6>[    0.354796] Simple Boot Flag at 0xf1 set to 0x1
><6>[    0.354843] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
><6>[    0.354845] ACPI: bus type PCI registered
><6>[    0.354846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
><6>[    0.354911] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
><6>[    0.354914] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
><6>[    0.354918] PCI: Using configuration type 1 for base access
><6>[    0.354925] dmi type 0xB1 record - unknown flag
><6>[    0.359910] HugeTLB registered 2 MB page size, pre-allocated 0 pages
><6>[    0.376724] raid6: sse2x1   gen()  7136 MB/s
><6>[    0.393716] raid6: sse2x1   xor()  5710 MB/s
><6>[    0.410717] raid6: sse2x2   gen()  8519 MB/s
><6>[    0.427712] raid6: sse2x2   xor()  6746 MB/s
><6>[    0.444877] raid6: sse2x4   gen()  9761 MB/s
><6>[    0.461709] raid6: sse2x4   xor()  7349 MB/s
><6>[    0.461711] raid6: using algorithm sse2x4 gen() 9761 MB/s
><6>[    0.461712] raid6: .... xor() 7349 MB/s, rmw enabled
><6>[    0.461713] raid6: using ssse3x2 recovery algorithm
><6>[    0.461788] ACPI: Added _OSI(Module Device)
><6>[    0.461790] ACPI: Added _OSI(Processor Device)
><6>[    0.461791] ACPI: Added _OSI(3.0 _SCP Extensions)
><6>[    0.461792] ACPI: Added _OSI(Processor Aggregator Device)
><5>[    0.465805] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
><4>[    0.476363] ACPI: Dynamic OEM Table Load:
><4>[    0.476369] ACPI: SSDT 0xFFFF880126669000 000474 (v01 PmRef  Cpu0Ist  00003000 INTL 20080729)
><4>[    0.476733] ACPI: Dynamic OEM Table Load:
><4>[    0.476739] ACPI: SSDT 0xFFFF8801266B8000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20080729)
><4>[    0.477304] ACPI: Dynamic OEM Table Load:
><4>[    0.477308] ACPI: SSDT 0xFFFF880126671000 000303 (v01 PmRef  ApIst    00003000 INTL 20080729)
><4>[    0.477677] ACPI: Dynamic OEM Table Load:
><4>[    0.477680] ACPI: SSDT 0xFFFF8801265E7400 000119 (v01 PmRef  ApCst    00003000 INTL 20080729)
><6>[    0.478380] ACPI : EC: EC started
><6>[    0.479338] ACPI: Interpreter enabled
><6>[    0.479356] ACPI: (supports S0 S3 S4 S5)
><6>[    0.479357] ACPI: Using IOAPIC for interrupt routing
><6>[    0.479379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
><6>[    0.493966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
><6>[    0.493972] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
><7>[    0.494000] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
><7>[    0.494001] _OSC request data: 1 1f 0
><6>[    0.494005] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
><6>[    0.494369] PCI host bridge to bus 0000:00
><6>[    0.494371] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
><6>[    0.494373] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
><6>[    0.494374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
><6>[    0.494376] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
><6>[    0.494378] pci_bus 0000:00: root bus resource [bus 00-3e]
><7>[    0.494385] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
><6>[    0.494405] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
><7>[    0.494468] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
><7>[    0.494498] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
><6>[    0.494533] pci 0000:00:01.0: System wakeup disabled by ACPI
><7>[    0.494597] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
><7>[    0.494619] pci 0000:00:19.0: reg 0x10: [mem 0xe9600000-0xe961ffff]
><7>[    0.494630] pci 0000:00:19.0: reg 0x14: [mem 0xe9680000-0xe9680fff]
><7>[    0.494641] pci 0000:00:19.0: reg 0x18: [io  0x8040-0x805f]
><7>[    0.494727] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
><6>[    0.494770] pci 0000:00:19.0: System wakeup disabled by ACPI
><7>[    0.494807] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
><7>[    0.494827] pci 0000:00:1a.0: reg 0x10: [mem 0xe9670000-0xe96703ff]
><7>[    0.494927] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
><6>[    0.494966] pci 0000:00:1a.0: System wakeup disabled by ACPI
><7>[    0.495003] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
><7>[    0.495026] pci 0000:00:1b.0: reg 0x10: [mem 0xe9660000-0xe9663fff 64bit]
><7>[    0.495130] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
><6>[    0.495176] pci 0000:00:1b.0: System wakeup disabled by ACPI
><7>[    0.495211] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
><7>[    0.495306] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
><6>[    0.495350] pci 0000:00:1c.0: System wakeup disabled by ACPI
><7>[    0.495385] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
><7>[    0.495481] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
><6>[    0.495524] pci 0000:00:1c.1: System wakeup disabled by ACPI
><7>[    0.495560] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
><7>[    0.495656] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
><6>[    0.495704] pci 0000:00:1c.2: System wakeup disabled by ACPI
><7>[    0.495741] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
><7>[    0.495837] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
><6>[    0.495881] pci 0000:00:1c.3: System wakeup disabled by ACPI
><7>[    0.495923] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
><7>[    0.495944] pci 0000:00:1d.0: reg 0x10: [mem 0xe9650000-0xe96503ff]
><7>[    0.496043] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
><6>[    0.496082] pci 0000:00:1d.0: System wakeup disabled by ACPI
><7>[    0.496115] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
><6>[    0.496213] pci 0000:00:1e.0: System wakeup disabled by ACPI
><7>[    0.496246] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
><7>[    0.496409] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
><7>[    0.496430] pci 0000:00:1f.2: reg 0x10: [io  0x8090-0x8097]
><7>[    0.496440] pci 0000:00:1f.2: reg 0x14: [io  0x8080-0x8083]
><7>[    0.496451] pci 0000:00:1f.2: reg 0x18: [io  0x8070-0x8077]
><7>[    0.496461] pci 0000:00:1f.2: reg 0x1c: [io  0x8060-0x8063]
><7>[    0.496471] pci 0000:00:1f.2: reg 0x20: [io  0x8020-0x803f]
><7>[    0.496482] pci 0000:00:1f.2: reg 0x24: [mem 0xe9640000-0xe96407ff]
><7>[    0.496540] pci 0000:00:1f.2: PME# supported from D3hot
><7>[    0.496610] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
><7>[    0.496630] pci 0000:00:1f.3: reg 0x10: [mem 0xe9630000-0xe96300ff 64bit]
><7>[    0.496659] pci 0000:00:1f.3: reg 0x20: [io  0x8000-0x801f]
><7>[    0.496759] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
><7>[    0.496784] pci 0000:00:1f.6: reg 0x10: [mem 0xe9620000-0xe9620fff 64bit]
><7>[    0.496960] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
><7>[    0.496969] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
><7>[    0.496978] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
><7>[    0.496986] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
><7>[    0.496992] pci 0000:01:00.0: reg 0x24: [io  0x7000-0x707f]
><7>[    0.496998] pci 0000:01:00.0: reg 0x30: [mem 0xe3000000-0xe307ffff pref]
><7>[    0.497113] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
><7>[    0.497123] pci 0000:01:00.1: reg 0x10: [mem 0xe3080000-0xe3083fff]
><6>[    0.497225] pci 0000:00:01.0: PCI bridge to [bus 01]
><7>[    0.497228] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
><7>[    0.497230] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
><6>[    0.497283] pci 0000:00:1c.0: PCI bridge to [bus 02]
><7>[    0.497288] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
><7>[    0.497292] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
><7>[    0.497442] pci 0000:03:00.0: [8086:422b] type 00 class 0x028000
><7>[    0.497505] pci 0000:03:00.0: reg 0x10: [mem 0xe6e00000-0xe6e01fff 64bit]
><7>[    0.497777] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
><6>[    0.497870] pci 0000:03:00.0: System wakeup disabled by ACPI
><6>[    0.499825] pci 0000:00:1c.1: PCI bridge to [bus 03]
><7>[    0.499830] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
><7>[    0.499834] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
><7>[    0.499962] pci 0000:04:00.0: [1180:e476] type 02 class 0x060700
><7>[    0.499988] pci 0000:04:00.0: reg 0x10: [mem 0xe5940000-0xe5940fff]
><7>[    0.500067] pci 0000:04:00.0: supports D1 D2
><7>[    0.500069] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>[    0.500099] pci 0000:04:00.0: System wakeup disabled by ACPI
><7>[    0.500192] pci 0000:04:00.1: [1180:e822] type 00 class 0x080501
><7>[    0.500219] pci 0000:04:00.1: reg 0x10: [mem 0xe5930000-0xe59300ff]
><7>[    0.500382] pci 0000:04:00.1: supports D1 D2
><7>[    0.500383] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
><7>[    0.500502] pci 0000:04:00.4: [1180:e832] type 00 class 0x0c0010
><7>[    0.500529] pci 0000:04:00.4: reg 0x10: [mem 0xe5900000-0xe59007ff]
><7>[    0.500692] pci 0000:04:00.4: supports D1 D2
><7>[    0.500693] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
><6>[    0.502804] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
><7>[    0.502815] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
><7>[    0.502819] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
><7>[    0.502892] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 04-05] (conflicts with (null) [bus 04-05])
><7>[    0.502897] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
><7>[    0.502899] pci_bus 0000:05: busn_res: can not insert [bus 05-08] under [bus 04-05] (conflicts with (null) [bus 04-05])
><6>[    0.502903] pci_bus 0000:05: [bus 05-08] partially hidden behind bridge 0000:04 [bus 04-05]
><4>[    0.502907] pci 0000:00:1c.2: bridge has subordinate 05 but max busn 08
><6>[    0.502977] acpiphp: Slot [1] registered
><6>[    0.502983] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
><7>[    0.502987] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
><7>[    0.502991] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
><6>[    0.503069] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
><7>[    0.503081] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
><7>[    0.503083] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
><7>[    0.503084] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
><7>[    0.503086] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
><6>[    0.504241] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
><6>[    0.504286] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
><6>[    0.504330] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
><6>[    0.504373] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
><6>[    0.504416] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
><6>[    0.504459] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
><6>[    0.504504] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
><6>[    0.504547] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
><6>[    0.505479] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
><6>[    0.505483] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
><6>[    0.505486] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
><6>[    0.505544] PCI host bridge to bus 0000:3f
><6>[    0.505546] pci_bus 0000:3f: root bus resource [bus 3f]
><7>[    0.505551] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
><7>[    0.505590] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
><7>[    0.505633] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
><7>[    0.505670] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
><7>[    0.505710] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
><7>[    0.505747] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
><4>[    0.506783] ACPI: Enabled 3 GPEs in block 00 to 3F
><6>[    0.506833] ACPI : EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
><6>[    0.506939] vgaarb: setting as boot device: PCI:0000:01:00.0
><6>[    0.506941] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
><6>[    0.506943] vgaarb: loaded
><6>[    0.506944] vgaarb: bridge control possible 0000:01:00.0
><5>[    0.507110] SCSI subsystem initialized
><7>[    0.507163] libata version 3.00 loaded.
><6>[    0.507261] PCI: Using ACPI for IRQ routing
><7>[    0.509412] PCI: pci_cache_line_size set to 64 bytes
><7>[    0.509529] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff]
><7>[    0.509530] e820: reserve RAM buffer [mem 0xcf65f000-0xcfffffff]
><6>[    0.509639] NetLabel: Initializing
><6>[    0.509640] NetLabel:  domain hash size = 128
><6>[    0.509641] NetLabel:  protocols = UNLABELED CIPSOv4
><6>[    0.509654] NetLabel:  unlabeled traffic allowed by default
><6>[    0.509738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
><6>[    0.509742] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
><6>[    0.511773] clocksource: Switched to clocksource hpet
><5>[    0.518420] VFS: Disk quotas dquot_6.6.0
><6>[    0.518442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>[    0.518587] pnp: PnP ACPI init
><6>[    0.518753] system 00:00: [io  0x0680-0x069f] has been reserved
><6>[    0.518755] system 00:00: [io  0x1000-0x1003] has been reserved
><6>[    0.518757] system 00:00: [io  0x1004-0x1013] has been reserved
><6>[    0.518758] system 00:00: [io  0xffff] has been reserved
><6>[    0.518760] system 00:00: [io  0x0400-0x047f] could not be reserved
><6>[    0.518762] system 00:00: [io  0x0500-0x057f] has been reserved
><6>[    0.518763] system 00:00: [io  0x164e-0x164f] has been reserved
><7>[    0.518767] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
><7>[    0.518807] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
><7>[    0.518829] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
><7>[    0.519567] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (disabled)
><7>[    0.519590] pnp 00:04: Plug and Play ACPI device, IDs DLL040b PNP0f13 (active)
><6>[    0.519813] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
><6>[    0.519815] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
><6>[    0.519817] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
><6>[    0.519818] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
><6>[    0.519820] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
><6>[    0.519821] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
><6>[    0.519823] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
><6>[    0.519824] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
><6>[    0.519826] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
><6>[    0.519828] system 00:05: [mem 0xe96c0000-0xe96c0fff] has been reserved
><7>[    0.519830] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
><6>[    0.522409] pnp: PnP ACPI: found 6 devices
><6>[    0.529085] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
><7>[    0.529108] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
><7>[    0.529119] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
><7>[    0.529139] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000 add_align 100000
><7>[    0.529149] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-0b] add_size 200000 add_align 100000
><7>[    0.529162] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529164] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529165] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529167] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529169] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529170] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529172] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><7>[    0.529173] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
><6>[    0.529180] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe9700000-0xe98fffff 64bit pref]
><6>[    0.529183] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe9900000-0xe9afffff 64bit pref]
><6>[    0.529186] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe9b00000-0xe9cfffff 64bit pref]
><6>[    0.529189] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe9d00000-0xe9efffff 64bit pref]
><6>[    0.529192] pci 0000:00:01.0: PCI bridge to [bus 01]
><6>[    0.529194] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
><6>[    0.529197] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
><6>[    0.529201] pci 0000:00:1c.0: PCI bridge to [bus 02]
><6>[    0.529204] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
><6>[    0.529209] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
><6>[    0.529214] pci 0000:00:1c.0:   bridge window [mem 0xe9700000-0xe98fffff 64bit pref]
><6>[    0.529221] pci 0000:00:1c.1: PCI bridge to [bus 03]
><6>[    0.529224] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
><6>[    0.529229] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
><6>[    0.529233] pci 0000:00:1c.1:   bridge window [mem 0xe9900000-0xe9afffff 64bit pref]
><7>[    0.529241] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
><7>[    0.529243] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
><7>[    0.529245] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
><7>[    0.529246] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
><7>[    0.529248] pci 0000:04:00.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
><7>[    0.529250] pci 0000:04:00.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
><7>[    0.529252] pci 0000:04:00.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
><7>[    0.529253] pci 0000:04:00.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
><6>[    0.529256] pci 0000:04:00.0: BAR 15: no space for [mem size 0x04000000 pref]
><6>[    0.529257] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x04000000 pref]
><6>[    0.529259] pci 0000:04:00.0: BAR 16: no space for [mem size 0x04000000]
><6>[    0.529261] pci 0000:04:00.0: BAR 16: failed to assign [mem size 0x04000000]
><6>[    0.529262] pci 0000:04:00.0: BAR 13: assigned [io  0x2000-0x20ff]
><6>[    0.529264] pci 0000:04:00.0: BAR 14: assigned [io  0x2400-0x24ff]
><6>[    0.529266] pci 0000:04:00.0: BAR 16: no space for [mem size 0x04000000]
><6>[    0.529268] pci 0000:04:00.0: BAR 16: failed to assign [mem size 0x04000000]
><6>[    0.529269] pci 0000:04:00.0: BAR 15: no space for [mem size 0x04000000 pref]
><6>[    0.529271] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x04000000 pref]
><6>[    0.529273] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
><6>[    0.529274] pci 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
><6>[    0.529280] pci 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
><6>[    0.529285] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
><6>[    0.529288] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
><6>[    0.529294] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
><6>[    0.529298] pci 0000:00:1c.2:   bridge window [mem 0xe9b00000-0xe9cfffff 64bit pref]
><6>[    0.529305] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
><6>[    0.529308] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
><6>[    0.529313] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
><6>[    0.529317] pci 0000:00:1c.3:   bridge window [mem 0xe9d00000-0xe9efffff 64bit pref]
><6>[    0.529324] pci 0000:00:1e.0: PCI bridge to [bus 0c]
><7>[    0.529339] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
><7>[    0.529340] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
><7>[    0.529342] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
><7>[    0.529343] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff window]
><7>[    0.529345] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
><7>[    0.529346] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
><7>[    0.529348] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
><7>[    0.529349] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe95fffff]
><7>[    0.529351] pci_bus 0000:02: resource 2 [mem 0xe9700000-0xe98fffff 64bit pref]
><7>[    0.529352] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
><7>[    0.529354] pci_bus 0000:03: resource 1 [mem 0xe6e00000-0xe81fffff]
><7>[    0.529355] pci_bus 0000:03: resource 2 [mem 0xe9900000-0xe9afffff 64bit pref]
><7>[    0.529357] pci_bus 0000:04: resource 0 [io  0x2000-0x3fff]
><7>[    0.529358] pci_bus 0000:04: resource 1 [mem 0xe3100000-0xe59fffff]
><7>[    0.529359] pci_bus 0000:04: resource 2 [mem 0xe9b00000-0xe9cfffff 64bit pref]
><7>[    0.529361] pci_bus 0000:05: resource 0 [io  0x2000-0x20ff]
><7>[    0.529362] pci_bus 0000:05: resource 1 [io  0x2400-0x24ff]
><7>[    0.529364] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
><7>[    0.529365] pci_bus 0000:06: resource 1 [mem 0xe5a00000-0xe6dfffff]
><7>[    0.529366] pci_bus 0000:06: resource 2 [mem 0xe9d00000-0xe9efffff 64bit pref]
><7>[    0.529368] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7 window]
><7>[    0.529369] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff window]
><7>[    0.529371] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff window]
><7>[    0.529372] pci_bus 0000:0c: resource 7 [mem 0xd0000000-0xfeafffff window]
><6>[    0.529399] NET: Registered protocol family 2
><6>[    0.529569] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
><6>[    0.529641] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
><6>[    0.529745] TCP: Hash tables configured (established 32768 bind 32768)
><6>[    0.529788] UDP hash table entries: 2048 (order: 4, 65536 bytes)
><6>[    0.529807] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
><6>[    0.529864] NET: Registered protocol family 1
><6>[    0.530267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
><7>[    0.530318] PCI: CLS 64 bytes, default 64
><6>[    0.530378] Trying to unpack rootfs image as initramfs...
><6>[    3.602954] Freeing initrd memory: 44292K (ffff88007d4bf000 - ffff880080000000)
><6>[    3.602984] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
><6>[    3.602987] software IO TLB [mem 0xcb65f000-0xcf65f000] (64MB) mapped at [ffff8800cb65f000-ffff8800cf65efff]
><6>[    3.603471] futex hash table entries: 2048 (order: 5, 131072 bytes)
><6>[    3.603551] audit: initializing netlink subsys (disabled)
><5>[    3.603573] audit: type=2000 audit(1465668209.483:1): initialized
><4>[    3.604007] workingset: timestamp_bits=54 max_order=20 bucket_order=0
><6>[    3.605268] zbud: loaded
><6>[    3.606016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
><6>[    3.606052] io scheduler noop registered
><6>[    3.606055] io scheduler deadline registered
><6>[    3.606080] io scheduler cfq registered (default)
><6>[    3.606838] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>[    3.606844] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
><6>[    3.606883] vesafb: mode is 800x600x16, linelength=1600, pages=2
><6>[    3.606884] vesafb: scrolling: redraw
><6>[    3.606886] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>[    3.606898] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90000a00000, using 1875k, total 14336k
><6>[    3.633369] Console: switching to colour frame buffer device 100x37
><6>[    3.659589] fb0: VESA VGA frame buffer device
><7>[    3.659604] intel_idle: MWAIT substates: 0x1120
><7>[    3.659606] intel_idle: v0.4.1 model 0x25
><7>[    3.659723] intel_idle: lapic_timer_reliable_states 0xffffffff
><6>[    3.659758] GHES: HEST is not enabled!
><6>[    3.659821] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
><6>[    3.660185] Linux agpgart interface v0.103
><6>[    3.662840] brd: module loaded
><7>[    3.662993] ahci 0000:00:1f.2: version 3.0
><6>[    3.663201] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
><6>[    3.663205] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
><6>[    3.670249] scsi host0: ahci
><6>[    3.670693] scsi host1: ahci
><6>[    3.670938] scsi host2: ahci
><6>[    3.671187] scsi host3: ahci
><6>[    3.671434] scsi host4: ahci
><6>[    3.671639] scsi host5: ahci
><6>[    3.671717] ata1: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640100 irq 25
><6>[    3.671722] ata2: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640180 irq 25
><6>[    3.671724] ata3: DUMMY
><6>[    3.671726] ata4: DUMMY
><6>[    3.671730] ata5: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640300 irq 25
><6>[    3.671734] ata6: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640380 irq 25
><6>[    3.671912] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><4>[    3.672349] i8042: Warning: Keylock active
><6>[    3.673675] serio: i8042 KBD port at 0x60,0x64 irq 1
><6>[    3.673679] serio: i8042 AUX port at 0x60,0x64 irq 12
><6>[    3.673803] mousedev: PS/2 mouse device common for all mice
><6>[    3.673852] rtc_cmos 00:01: RTC can wake from S4
><6>[    3.674002] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
><6>[    3.674044] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
><6>[    3.674062] ledtrig-cpu: registered to indicate activity on CPUs
><5>[    3.674378] Key type dns_resolver registered
><6>[    3.674385] mpls_gso: MPLS GSO support
><6>[    3.674747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><6>[    3.675043] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
><6>[    3.675061] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
><6>[    3.675091] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
><6>[    3.675100] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
><6>[    3.675193] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
><6>[    3.675514] registered taskstats version 1
><6>[    3.675573] zswap: loaded using pool lzo/zbud
><6>[    3.676337] Btrfs loaded
><6>[    3.676958]   Magic number: 4:249:89
><6>[    3.677135] rtc_cmos 00:01: setting system clock to 2016-06-11 18:03:30 UTC (1465668210)
><6>[    3.677260] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><7>[    3.677412] PM: Hibernation image not present or could not be loaded.
><6>[    3.976423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>[    3.976461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>[    3.976576] ata5: SATA link down (SStatus 0 SControl 300)
><6>[    3.976606] ata6: SATA link down (SStatus 0 SControl 300)
><6>[    3.976953] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A3S, KD02, max UDMA/100
><6>[    3.978279] ata2.00: configured for UDMA/100
><6>[    3.980537] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
><6>[    3.980989] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
><6>[    3.980994] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
><6>[    3.986142] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
><6>[    3.986638] ata1.00: configured for UDMA/133
><5>[    3.987078] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
><5>[    3.997911] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
><5>[    3.997917] sd 0:0:0:0: [sda] 4096-byte physical blocks
><5>[    3.998265] sd 0:0:0:0: [sda] Write Protect is off
><7>[    3.998273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>[    3.998379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>[    3.999621] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A3S  KD02 PQ: 0 ANSI: 5
><6>[    4.089386]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 >
><5>[    4.090120] sd 0:0:0:0: [sda] Attached SCSI disk
><6>[    4.091244] Freeing unused kernel memory: 1352K (ffffffff81d21000 - ffffffff81e73000)
><6>[    4.091246] Write protecting the kernel read-only data: 12288k
><6>[    4.091621] Freeing unused kernel memory: 1000K (ffff880001706000 - ffff880001800000)
><6>[    4.093210] Freeing unused kernel memory: 768K (ffff880001b40000 - ffff880001c00000)
><30>[    4.174497] dracut: dracut-044
><5>[    4.298857] random: systemd-udevd urandom read with 32 bits of entropy available
><6>[    4.357281] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
><6>[    4.368671] acpi device:02: registered as cooling_device4
><6>[    4.370762] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input2
><7>[    4.375030] parport_pc 00:03: [io  0x0378-0x037b]
><7>[    4.375037] parport_pc 00:03: [io  0x0278-0x027b]
><7>[    4.375041] parport_pc 00:03: [io  0x03bc-0x03bf]
><7>[    4.375045] parport_pc 00:03: [io  0x0378-0x037b]
><7>[    4.375131] parport_pc 00:03: [irq 7]
><6>[    4.376649] wmi: Mapper loaded
><6>[    4.376993] parport_pc 00:03: activated
><6>[    4.376998] parport_pc 00:03: reported by Plug and Play ACPI
><6>[    4.381000] pps_core: LinuxPPS API ver. 1 registered
><6>[    4.381001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
><6>[    4.382225] PTP clock support registered
><6>[    4.395032] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
><6>[    4.395033] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
><6>[    4.395301] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
><6>[    4.406192] ACPI: bus type USB registered
><6>[    4.406225] usbcore: registered new interface driver usbfs
><6>[    4.406237] usbcore: registered new interface driver hub
><6>[    4.406270] usbcore: registered new device driver usb
><6>[    4.411357] yenta_cardbus 0000:04:00.0: CardBus bridge found [1028:040b]
><6>[    4.411390] yenta_cardbus 0000:04:00.0: CardBus bridge to [bus 05-08]
><6>[    4.411393] yenta_cardbus 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
><6>[    4.411401] yenta_cardbus 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
><6>[    4.411409] yenta_cardbus 0000:04:00.0:   bridge window [mem 0xe3100000-0xe44fffff pref]
><6>[    4.411414] yenta_cardbus 0000:04:00.0:   bridge window [mem 0xe4800000-0xe4bfffff]
><6>[    4.411706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
><6>[    4.412476] ehci-pci: EHCI PCI platform driver
><6>[    4.428177] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
><6>[    4.428179] cdrom: Uniform CD-ROM driver Revision: 3.20
><7>[    4.428364] sr 1:0:0:0: Attached scsi CD-ROM sr0
><6>[    4.440254] sdhci: Secure Digital Host Controller Interface driver
><6>[    4.440258] sdhci: Copyright(c) Pierre Ossman
><6>[    4.462521] Intel(R) Wireless WiFi driver for Linux
><6>[    4.462525] Copyright(c) 2003- 2015 Intel Corporation
><4>[    4.462793] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
><6>[    4.464138] SSE version of gcm_enc/dec engaged.
><4>[    4.466976] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
><4>[    4.466981] iwlwifi 0000:03:00.0: Falling back to user helper
><6>[    4.474763] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
><6>[    4.490787] dell_laptop: Symbols from dell-rbtn acpi driver are not available
><6>[    4.490791] dell_laptop: Using i8042 filter function for receiving events
><6>[    4.521648] ppdev: user-space parallel port driver
><4>[    4.523306] dell_wmi: Dell descriptor buffer has invalid buffer length (128)
><6>[    4.523308] dell_wmi: Detected Dell WMI interface version 1
><6>[    4.523385] input: Dell WMI hotkeys as /devices/virtual/input/input4
><6>[    4.535169] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0000, PCI irq 18
><6>[    4.535175] yenta_cardbus 0000:04:00.0: Socket status: 30000006
><4>[    4.535178] pci_bus 0000:05: Upper limit for fixing this bridge's parent bridge: #05
><6>[    4.535184] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
><6>[    4.535186] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xe3100000-0xe59fffff]
><6>[    4.535188] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe3100000-0xe59fffff:
><0>[    4.535193]  excluding 0xe3100000-0xe4d2ffff 0xe5770000-0xe59fffff
><6>[    4.535198] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xe9b00000-0xe9cfffff 64bit pref]
><6>[    4.535199] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe9b00000-0xe9cfffff:
><0>[    4.535202]  excluding 0xe9b00000-0xe9cfffff
><6>[    4.542537] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
><0>[    4.542546]  excluding 0xc0000-0xfffff
><6>[    4.542572] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
><0>[    4.542576]  excluding 0xa0000000-0xa0ffffff
><6>[    4.542601] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
><0>[    4.542606]  excluding 0x60000000-0x60ffffff
><5>[    4.588582] firewire_ohci 0000:04:00.4: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
><6>[    4.588752] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:e822] (rev 3)
><6>[    4.590482] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
><6>[    4.603481] tsc: Refined TSC clocksource calibration: 2659.999 MHz
><6>[    4.603487] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657a34898c, max_idle_ns: 440795323804 ns
><6>[    4.640873] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:32:93:a2
><6>[    4.640877] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
><6>[    4.640929] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2041FF-0FF
><6>[    4.641193] ehci-pci 0000:00:1a.0: EHCI Host Controller
><6>[    4.641202] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
><6>[    4.641218] ehci-pci 0000:00:1a.0: debug port 2
><7>[    4.645156] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
><6>[    4.645171] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe9670000
><6>[    4.650484] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
><6>[    4.650578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
><6>[    4.650583] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    4.650587] usb usb1: Product: EHCI Host Controller
><6>[    4.650590] usb usb1: Manufacturer: Linux 4.6.2-desktop-1.mga6 ehci_hcd
><6>[    4.650593] usb usb1: SerialNumber: 0000:00:1a.0
><6>[    4.650787] hub 1-0:1.0: USB hub found
><6>[    4.650797] hub 1-0:1.0: 3 ports detected
><6>[    4.651018] ehci-pci 0000:00:1d.0: EHCI Host Controller
><6>[    4.651023] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>[    4.651036] ehci-pci 0000:00:1d.0: debug port 2
><7>[    4.654952] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
><6>[    4.654963] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe9650000
><6>[    4.660507] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
><6>[    4.660618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>[    4.660623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    4.660627] usb usb2: Product: EHCI Host Controller
><6>[    4.660630] usb usb2: Manufacturer: Linux 4.6.2-desktop-1.mga6 ehci_hcd
><6>[    4.660633] usb usb2: SerialNumber: 0000:00:1d.0
><6>[    4.660847] hub 2-0:1.0: USB hub found
><6>[    4.660856] hub 2-0:1.0: 3 ports detected
><0>[    4.661106] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801F conflicts with OpRegion 0x0000000000008000-0x000000000000800F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
><6>[    4.661112] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
><6>[    4.661150] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
><6>[    4.661814] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
><6>[    4.661910] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
><6>[    4.952448] usb 1-1: new high-speed USB device number 2 using ehci-pci
><5>[    4.960621] random: nonblocking pool is initialized
><6>[    4.962400] usb 2-1: new high-speed USB device number 2 using ehci-pci
><6>[    5.066857] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
><6>[    5.066863] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>[    5.067386] hub 1-1:1.0: USB hub found
><6>[    5.067441] hub 1-1:1.0: 6 ports detected
><6>[    5.076852] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
><6>[    5.076858] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>[    5.077354] hub 2-1:1.0: USB hub found
><6>[    5.077763] hub 2-1:1.0: 8 ports detected
><5>[    5.089487] firewire_core 0000:04:00.4: created device fw0: GUID 02e07681474fc000, S400
><6>[    5.353409] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
><6>[    5.464107] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
><6>[    5.464113] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>[    5.464116] usb 2-1.8: Product: 5880
><6>[    5.464119] usb 2-1.8: Manufacturer: Broadcom Corp
><6>[    5.464121] usb 2-1.8: SerialNumber: 0123456789ABCD
><4>[    5.464397] usb 2-1.8: config 0 descriptor??
><6>[    5.603589] clocksource: Switched to clocksource tsc
><6>[    5.828381] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input5
><6>[    5.841954] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input3
><6>[    8.559496] hidraw: raw HID events driver (C) Jiri Kosina
><6>[    8.562420] usbcore: registered new interface driver usbhid
><6>[    8.562423] usbhid: USB HID core driver
><6>[   15.070876] NET: Registered protocol family 17
><4>[   64.461178] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
><4>[   64.461181] iwlwifi 0000:03:00.0: Falling back to user helper
><6>[  124.456252] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
><6>[  124.491216] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
><6>[  124.491221] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
><6>[  124.491223] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
><6>[  124.491226] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
><6>[  124.491332] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
><7>[  124.510605] ieee80211 phy0: Failed to initialize wep: -2
><7>[  124.510628] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
><6>[  145.108944] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
><3>[  145.171908] usb 2-1.3: device descriptor read/64, error -32
><3>[  145.346921] usb 2-1.3: device descriptor read/64, error -32
><6>[  145.520906] usb 2-1.3: new full-speed USB device number 6 using ehci-pci
><3>[  145.583898] usb 2-1.3: device descriptor read/64, error -32
><3>[  145.747848] usb 2-1.3: device descriptor read/64, error -32
><6>[  145.921881] usb 2-1.3: new full-speed USB device number 7 using ehci-pci
><3>[  146.323842] usb 2-1.3: device not accepting address 7, error -32
><6>[  146.396827] usb 2-1.3: new full-speed USB device number 8 using ehci-pci
><3>[  146.798801] usb 2-1.3: device not accepting address 8, error -32
><3>[  146.798893] usb 2-1-port3: unable to enumerate USB device
><6>[  146.975777] usb 2-1.3: new full-speed USB device number 9 using ehci-pci
><6>[  147.412696] usb 2-1.3: new full-speed USB device number 10 using ehci-pci
><6>[  147.668715] usb 2-1.3: new full-speed USB device number 11 using ehci-pci
><3>[  147.731721] usb 2-1.3: device descriptor read/64, error -32
><3>[  147.905693] usb 2-1.3: device descriptor read/64, error -32
><6>[  148.079677] usb 2-1.3: new full-speed USB device number 12 using ehci-pci
><6>[  148.436646] usb 2-1.3: new full-speed USB device number 13 using ehci-pci
><3>[  148.499651] usb 2-1.3: device descriptor read/64, error -32
><3>[  148.663625] usb 2-1.3: device descriptor read/64, error -32
><6>[  148.837574] usb 2-1.3: new full-speed USB device number 14 using ehci-pci
><6>[  149.204578] usb 2-1.3: new full-speed USB device number 15 using ehci-pci
><3>[  149.277572] usb 2-1.3: device descriptor read/64, error -32
><6>[  149.716495] usb 2-1.3: new full-speed USB device number 16 using ehci-pci
><6>[  149.972508] usb 2-1.3: new full-speed USB device number 17 using ehci-pci
><3>[  150.035466] usb 2-1.3: device descriptor read/64, error -32
><6>[  150.484423] usb 2-1.3: new full-speed USB device number 18 using ehci-pci
><3>[  150.558416] usb 2-1.3: device descriptor read/64, error -32
><3>[  150.722402] usb 2-1.3: device descriptor read/64, error -32
><6>[  150.896386] usb 2-1.3: new full-speed USB device number 19 using ehci-pci
><3>[  150.959380] usb 2-1.3: device descriptor read/64, error -32
><6>[  151.508372] usb 2-1.3: new full-speed USB device number 21 using ehci-pci
><3>[  151.582364] usb 2-1.3: device descriptor read/64, error -32
><3>[  151.757312] usb 2-1.3: device descriptor read/64, error -32
><6>[  151.931315] usb 2-1.3: new full-speed USB device number 22 using ehci-pci
><3>[  152.004330] usb 2-1.3: device descriptor read/64, error -32
><3>[  152.179311] usb 2-1.3: device descriptor read/64, error -32
><6>[  152.353296] usb 2-1.3: new full-speed USB device number 23 using ehci-pci
><3>[  152.755259] usb 2-1.3: device not accepting address 23, error -32
><6>[  153.300172] usb 2-1.3: new full-speed USB device number 26 using ehci-pci
><3>[  153.373165] usb 2-1.3: device descriptor read/64, error -32
><6>[  153.812170] usb 2-1.3: new full-speed USB device number 27 using ehci-pci
><3>[  153.886122] usb 2-1.3: device descriptor read/64, error -32
><3>[  154.061146] usb 2-1.3: device descriptor read/64, error -32
><6>[  154.580058] usb 2-1.3: new full-speed USB device number 30 using ehci-pci
><6>[  154.836040] usb 2-1.3: new full-speed USB device number 31 using ehci-pci
><3>[  154.899081] usb 2-1.3: device descriptor read/64, error -32
><3>[  155.063022] usb 2-1.3: device descriptor read/64, error -32
><6>[  155.237003] usb 2-1.3: new full-speed USB device number 32 using ehci-pci
><6>[  155.604010] usb 2-1.3: new full-speed USB device number 33 using ehci-pci
><3>[  155.666964] usb 2-1.3: device descriptor read/64, error -32
><6>[  155.967974] usb 2-1.3: new full-speed USB device number 34 using ehci-pci
><3>[  156.030968] usb 2-1.3: device descriptor read/64, error -32
><3>[  156.205952] usb 2-1.3: device descriptor read/64, error -32
><6>[  156.379937] usb 2-1.3: new full-speed USB device number 35 using ehci-pci
><3>[  156.442895] usb 2-1.3: device descriptor read/64, error -32
><3>[  156.606919] usb 2-1.3: device descriptor read/64, error -32
><6>[  156.780904] usb 2-1.3: new full-speed USB device number 36 using ehci-pci
><3>[  157.182829] usb 2-1.3: device not accepting address 36, error -32
><6>[  157.255860] usb 2-1.3: new full-speed USB device number 37 using ehci-pci
><3>[  157.657824] usb 2-1.3: device not accepting address 37, error -32
><3>[  157.657928] usb 2-1-port3: unable to enumerate USB device
><6>[  177.618007] usb 2-1.3: new full-speed USB device number 39 using ehci-pci
><3>[  177.681001] usb 2-1.3: device descriptor read/64, error -32
><6>[  178.130004] usb 2-1.3: new full-speed USB device number 40 using ehci-pci
><3>[  178.202995] usb 2-1.3: device descriptor read/64, error -32
><3>[  178.366944] usb 2-1.3: device descriptor read/64, error -32
><6>[  178.540964] usb 2-1.3: new full-speed USB device number 41 using ehci-pci
><3>[  178.603959] usb 2-1.3: device descriptor read/64, error -32
><3>[  178.767908] usb 2-1.3: device descriptor read/64, error -32
><6>[  179.153874] usb 2-1.3: new full-speed USB device number 43 using ehci-pci
><3>[  179.226867] usb 2-1.3: device descriptor read/64, error -32
><6>[  179.921806] usb 2-1.3: new full-speed USB device number 45 using ehci-pci
><6>[  180.177822] usb 2-1.3: new full-speed USB device number 46 using ehci-pci
><3>[  180.251776] usb 2-1.3: device descriptor read/64, error -32
><6>[  180.689737] usb 2-1.3: new full-speed USB device number 47 using ehci-pci
><6>[  180.945751] usb 2-1.3: new full-speed USB device number 48 using ehci-pci
><3>[  181.008757] usb 2-1.3: device descriptor read/64, error -32
><6>[  181.457665] usb 2-1.3: new full-speed USB device number 49 using ehci-pci
><3>[  181.530658] usb 2-1.3: device descriptor read/64, error -32
><3>[  181.704643] usb 2-1.3: device descriptor read/64, error -32
><6>[  181.878628] usb 2-1.3: new full-speed USB device number 50 using ehci-pci
><3>[  181.941622] usb 2-1.3: device descriptor read/64, error -32
><3>[  182.105607] usb 2-1.3: device descriptor read/64, error -32
><6>[  182.279592] usb 2-1.3: new full-speed USB device number 51 using ehci-pci
><3>[  182.681556] usb 2-1.3: device not accepting address 51, error -32
><6>[  182.880538] usb 2-1.3: new full-speed USB device number 53 using ehci-pci
><3>[  182.953532] usb 2-1.3: device descriptor read/64, error -32
><6>[  183.253505] usb 2-1.3: new full-speed USB device number 54 using ehci-pci
><6>[  183.505526] usb 2-1.3: new full-speed USB device number 55 using ehci-pci
><3>[  183.568518] usb 2-1.3: device descriptor read/64, error -32
><3>[  183.732506] usb 2-1.3: device descriptor read/64, error -32
><6>[  183.906490] usb 2-1.3: new full-speed USB device number 56 using ehci-pci
><3>[  183.969444] usb 2-1.3: device descriptor read/64, error -32
><3>[  184.143465] usb 2-1.3: device descriptor read/64, error -32
><6>[  184.529396] usb 2-1.3: new full-speed USB device number 58 using ehci-pci
><3>[  184.602389] usb 2-1.3: device descriptor read/64, error -32
><3>[  184.766375] usb 2-1.3: device descriptor read/64, error -32
><6>[  185.297327] usb 2-1.3: new full-speed USB device number 60 using ehci-pci
><6>[  185.553340] usb 2-1.3: new full-speed USB device number 61 using ehci-pci
><3>[  185.626346] usb 2-1.3: device descriptor read/64, error -32
><3>[  185.800298] usb 2-1.3: device descriptor read/64, error -32
><6>[  185.974303] usb 2-1.3: new full-speed USB device number 62 using ehci-pci
><6>[  186.321232] usb 2-1.3: new full-speed USB device number 63 using ehci-pci
><3>[  186.394225] usb 2-1.3: device descriptor read/64, error -32
><6>[  186.833191] usb 2-1.3: new full-speed USB device number 64 using ehci-pci
><6>[  187.089164] usb 2-1.3: new full-speed USB device number 65 using ehci-pci
><3>[  187.152158] usb 2-1.3: device descriptor read/64, error -32
><3>[  187.327142] usb 2-1.3: device descriptor read/64, error -32
><6>[  187.501127] usb 2-1.3: new full-speed USB device number 66 using ehci-pci
><3>[  187.574120] usb 2-1.3: device descriptor read/64, error -32
><3>[  187.749105] usb 2-1.3: device descriptor read/64, error -32
><6>[  187.923089] usb 2-1.3: new full-speed USB device number 67 using ehci-pci
><3>[  188.325054] usb 2-1.3: device not accepting address 67, error -32
><6>[  188.398047] usb 2-1.3: new full-speed USB device number 68 using ehci-pci
><3>[  188.800011] usb 2-1.3: device not accepting address 68, error -32
><3>[  188.800169] usb 2-1-port3: unable to enumerate USB device
><6>[  265.758619] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
><6>[  265.765486] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
><6>[  265.765578] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
><6>[  265.982790] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
><6>[  265.989667] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
><6>[  265.989758] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
><6>[  269.261476] wlan0: authenticate with 84:1b:5e:44:cf:f2
><6>[  269.263708] wlan0: send auth to 84:1b:5e:44:cf:f2 (try 1/3)
><6>[  269.265547] wlan0: authenticated
><6>[  269.265565] wlan0: waiting for beacon from 84:1b:5e:44:cf:f2
><6>[  269.270871] wlan0: associate with 84:1b:5e:44:cf:f2 (try 1/3)
><6>[  269.274393] wlan0: RX AssocResp from 84:1b:5e:44:cf:f2 (capab=0x401 status=0 aid=3)
><6>[  269.277730] wlan0: associated
><6>[  297.457721] loop: module loaded
><6>[  297.462670] squashfs: version 4.0 (2009/01/31) Phillip Lougher
><30>[  297.512228] dracut: Mounted root filesystem none
><30>[  297.591743] dracut: Switching root
><6>[  298.981845] NET: Registered protocol family 10
><6>[  298.982084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
><30>[  299.063713] systemd-udevd[708]: starting version 230
><27>[  299.391912] systemd-udevd[751]: failed to execute '/sbin/initqueue' '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0': No such file or directory
><28>[  299.392096] systemd-udevd[723]: Process '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0' failed with exit code 2.
><6>[  319.462132] Floppy drive(s): fd0 is 1.44M
><6>[  322.475258] floppy0: no floppy controllers found
><6>[  322.475272] work still pending
><6>[  326.852804] usb 2-1.3: new full-speed USB device number 69 using ehci-pci
><3>[  326.926790] usb 2-1.3: device descriptor read/64, error -32
><6>[  327.876709] usb 2-1.3: new full-speed USB device number 71 using ehci-pci
><3>[  327.950700] usb 2-1.3: device descriptor read/64, error -32
><3>[  328.125649] usb 2-1.3: device descriptor read/64, error -32
><6>[  328.299634] usb 2-1.3: new full-speed USB device number 72 using ehci-pci
><3>[  328.373627] usb 2-1.3: device descriptor read/64, error -32
><3>[  328.548648] usb 2-1.3: device descriptor read/64, error -32
><6>[  328.722633] usb 2-1.3: new full-speed USB device number 73 using ehci-pci
><3>[  329.124593] usb 2-1.3: device not accepting address 73, error -32
><6>[  329.324580] usb 2-1.3: new full-speed USB device number 75 using ehci-pci
><3>[  329.398570] usb 2-1.3: device descriptor read/64, error -32
><6>[  332.996248] usb 2-1.4: new full-speed USB device number 76 using ehci-pci
><3>[  333.070246] usb 2-1.4: device descriptor read/64, error -32
><3>[  333.245230] usb 2-1.4: device descriptor read/64, error -32
><6>[  333.419215] usb 2-1.4: new full-speed USB device number 77 using ehci-pci
><3>[  333.493205] usb 2-1.4: device descriptor read/64, error -32
><6>[  333.795178] usb 2-1.4: new full-speed USB device number 78 using ehci-pci
><3>[  333.869174] usb 2-1.4: device descriptor read/64, error -32
><6>[  334.276139] usb 2-1.4: new full-speed USB device number 79 using ehci-pci
><3>[  334.350131] usb 2-1.4: device descriptor read/64, error -32
><3>[  334.525151] usb 2-1.4: device descriptor read/64, error -32
><6>[  334.699064] usb 2-1.4: new full-speed USB device number 80 using ehci-pci
><3>[  334.773091] usb 2-1.4: device descriptor read/64, error -32
><3>[  334.948079] usb 2-1.4: device descriptor read/64, error -32
><6>[  335.122074] usb 2-1.4: new full-speed USB device number 81 using ehci-pci
><3>[  335.524029] usb 2-1.4: device not accepting address 81, error -32
><6>[  335.597022] usb 2-1.4: new full-speed USB device number 82 using ehci-pci
><3>[  335.998951] usb 2-1.4: device not accepting address 82, error -32
><3>[  335.999150] usb 2-1-port4: unable to enumerate USB device
><6>[  336.323957] usb 2-1.4: new full-speed USB device number 84 using ehci-pci
><3>[  336.397947] usb 2-1.4: device descriptor read/64, error -32
><6>[  336.835911] usb 2-1.4: new full-speed USB device number 85 using ehci-pci
><3>[  336.909904] usb 2-1.4: device descriptor read/64, error -32
><3>[  337.084853] usb 2-1.4: device descriptor read/64, error -32
><6>[  337.258836] usb 2-1.4: new full-speed USB device number 86 using ehci-pci
><6>[  337.603794] usb 2-1.4: new full-speed USB device number 87 using ehci-pci
><3>[  337.666807] usb 2-1.4: device descriptor read/64, error -32
><3>[  337.841824] usb 2-1.4: device descriptor read/64, error -32
><6>[  338.015772] usb 2-1.4: new full-speed USB device number 88 using ehci-pci
><6>[  338.371775] usb 2-1.4: new full-speed USB device number 89 using ehci-pci
><3>[  338.445817] usb 2-1.4: device descriptor read/64, error -32
><3>[  338.609695] usb 2-1.4: device descriptor read/64, error -32
><6>[  339.139680] usb 2-1.4: new full-speed USB device number 92 using ehci-pci
><6>[  339.395643] usb 2-1.4: new full-speed USB device number 93 using ehci-pci
><3>[  339.458653] usb 2-1.4: device descriptor read/64, error -32
><3>[  339.633634] usb 2-1.4: device descriptor read/64, error -32
><6>[  339.807656] usb 2-1.4: new full-speed USB device number 94 using ehci-pci
><6>[  339.870339] Floppy drive(s): fd0 is 1.44M
><3>[  339.881663] usb 2-1.4: device descriptor read/64, error -32
><6>[  340.419593] usb 2-1.4: new full-speed USB device number 95 using ehci-pci
><3>[  340.493585] usb 2-1.4: device descriptor read/64, error -32
><3>[  340.668604] usb 2-1.4: device descriptor read/64, error -32
><6>[  340.842517] usb 2-1.4: new full-speed USB device number 96 using ehci-pci
><3>[  340.916547] usb 2-1.4: device descriptor read/64, error -32
><6>[  341.218520] usb 2-1.4: new full-speed USB device number 97 using ehci-pci
><3>[  341.292514] usb 2-1.4: device descriptor read/64, error -32
><3>[  341.467466] usb 2-1.4: device descriptor read/64, error -32
><6>[  341.641483] usb 2-1.4: new full-speed USB device number 98 using ehci-pci
><6>[  341.955452] usb 2-1.4: new full-speed USB device number 99 using ehci-pci
><6>[  342.211433] usb 2-1.4: new full-speed USB device number 100 using ehci-pci
><3>[  342.285423] usb 2-1.4: device descriptor read/64, error -32
><6>[  342.723387] usb 2-1.4: new full-speed USB device number 101 using ehci-pci
><3>[  342.797379] usb 2-1.4: device descriptor read/64, error -32
><6>[  342.889485] floppy0: no floppy controllers found
><6>[  342.889500] work still pending
><3>[  342.972367] usb 2-1.4: device descriptor read/64, error -32
><6>[  343.273340] usb 2-1.4: new full-speed USB device number 103 using ehci-pci
><3>[  343.347331] usb 2-1.4: device descriptor read/64, error -32
><3>[  343.522315] usb 2-1.4: device descriptor read/64, error -32
><6>[  343.696298] usb 2-1.4: new full-speed USB device number 104 using ehci-pci
><6>[  344.003270] usb 2-1.4: new full-speed USB device number 105 using ehci-pci
><3>[  344.077262] usb 2-1.4: device descriptor read/64, error -32
><6>[  344.515227] usb 2-1.4: new full-speed USB device number 106 using ehci-pci
><6>[  344.771205] usb 2-1.4: new full-speed USB device number 107 using ehci-pci
><6>[  345.027147] usb 2-1.4: new full-speed USB device number 108 using ehci-pci
><3>[  345.101171] usb 2-1.4: device descriptor read/64, error -32
><6>[  345.539136] usb 2-1.4: new full-speed USB device number 109 using ehci-pci
><6>[  345.795116] usb 2-1.4: new full-speed USB device number 110 using ehci-pci
><3>[  345.869121] usb 2-1.4: device descriptor read/64, error -32
><6>[  346.307068] usb 2-1.4: new full-speed USB device number 111 using ehci-pci
><6>[  346.819022] usb 2-1.4: new full-speed USB device number 113 using ehci-pci
><3>[  346.893012] usb 2-1.4: device descriptor read/64, error -32
><6>[  347.330976] usb 2-1.4: new full-speed USB device number 114 using ehci-pci
><6>[  347.586954] usb 2-1.4: new full-speed USB device number 115 using ehci-pci
><3>[  347.660929] usb 2-1.4: device descriptor read/64, error -32
><3>[  347.835931] usb 2-1.4: device descriptor read/64, error -32
><6>[  348.354886] usb 2-1.4: new full-speed USB device number 117 using ehci-pci
><3>[  348.428875] usb 2-1.4: device descriptor read/64, error -32
><3>[  348.603863] usb 2-1.4: device descriptor read/64, error -32
><6>[  348.904833] usb 2-1.4: new full-speed USB device number 119 using ehci-pci
><3>[  348.978829] usb 2-1.4: device descriptor read/64, error -32
><3>[  349.153814] usb 2-1.4: device descriptor read/64, error -32
><6>[  349.327799] usb 2-1.4: new full-speed USB device number 120 using ehci-pci
><3>[  349.401791] usb 2-1.4: device descriptor read/64, error -32
><3>[  349.576773] usb 2-1.4: device descriptor read/64, error -32
><6>[  349.750726] usb 2-1.4: new full-speed USB device number 121 using ehci-pci
><3>[  350.152688] usb 2-1.4: device not accepting address 121, error -32
><6>[  350.225677] usb 2-1.4: new full-speed USB device number 122 using ehci-pci
><3>[  350.627683] usb 2-1.4: device not accepting address 122, error -32
><3>[  350.627827] usb 2-1-port4: unable to enumerate USB device
><6>[  364.763428] usb 2-1.4: new full-speed USB device number 123 using ehci-pci
><6>[  429.499619] usb 2-1.4: new full-speed USB device number 124 using ehci-pci
><6>[  429.639750] usb 2-1.4: New USB device found, idVendor=0644, idProduct=0000
><6>[  429.639755] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>[  429.639759] usb 2-1.4: Product: TEAC FD-05PUW   
><6>[  429.639762] usb 2-1.4: Manufacturer: TEAC    
><6>[  429.647070] usb-storage 2-1.4:1.0: USB Mass Storage device detected
><6>[  429.647164] scsi host6: usb-storage 2-1.4:1.0
><6>[  429.647228] usbcore: registered new interface driver usb-storage
><5>[  430.699767] scsi 6:0:0:0: Direct-Access     TEAC     FD-05PUW         3000 PQ: 0 ANSI: 0 CCS
><5>[  430.827850] sd 6:0:0:0: [sdb] 2880 512-byte logical blocks: (1.47 MB/1.41 MiB)
><5>[  430.859873] sd 6:0:0:0: [sdb] Write Protect is off
><7>[  430.859880] sd 6:0:0:0: [sdb] Mode Sense: 00 46 94 00
><3>[  430.891848] sd 6:0:0:0: [sdb] No Caching mode page found
><3>[  430.891854] sd 6:0:0:0: [sdb] Assuming drive cache: write through
><6>[  431.243762]  sdb:
><5>[  431.467776] sd 6:0:0:0: [sdb] Attached SCSI removable disk
><6>[  442.723501] Floppy drive(s): fd0 is 1.44M
><6>[  445.744281] floppy0: no floppy controllers found
><6>[  445.744295] work still pending
><3>[  489.030613] EXT4-fs (sdb): VFS: Can't find ext4 filesystem

] kernel/system logger ok
<6>[    0.000000] microcode: microcode updated early to revision 0x4, date = 2013-06-28
<5>[    0.000000] Linux version 4.6.2-desktop-1.mga6 (iurt@rabbit.mageia.org) (gcc version 5.4.0 (GCC) ) #1 SMP Fri Jun 10 08:32:33 UTC 2016
<6>[    0.000000] Command line: BOOT_IMAGE=x86_64/vmlinuz initrd=x86_64/all.rdz  noiswmd vga=788 splash quiet
<6>[    0.000000] x86/fpu: Legacy x87 FPU detected.
<6>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
<6>[    0.000000] e820: BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000095bff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000000095c00-0x000000000009ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf65efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x00000000cf65f000-0x00000000cf67efff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x00000000cf67f000-0x00000000cf76efff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x00000000cf76f000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012bffffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.6 present.
<7>[    0.000000] DMI: Dell Inc. Latitude E6510/0N5KHN, BIOS A06 11/20/2010
<7>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000000] e820: last_pfn = 0x12c000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000 mask F80000000 write-back
<7>[    0.000000]   1 base 080000000 mask FC0000000 write-back
<7>[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
<7>[    0.000000]   3 base 100000000 mask FE0000000 write-back
<7>[    0.000000]   4 base 120000000 mask FF0000000 write-back
<7>[    0.000000]   5 base 12C000000 mask FFC000000 uncachable
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<6>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
<7>[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
<6>[    0.000000] e820: last_pfn = 0xcf65f max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [mem 0x000f2200-0x000f220f] mapped at [ffff8800000f2200]
<7>[    0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 24576
<7>[    0.000000] BRK [0x01f47000, 0x01f47fff] PGTABLE
<7>[    0.000000] BRK [0x01f48000, 0x01f48fff] PGTABLE
<7>[    0.000000] BRK [0x01f49000, 0x01f49fff] PGTABLE
<7>[    0.000000] BRK [0x01f4a000, 0x01f4afff] PGTABLE
<6>[    0.000000] RAMDISK: [mem 0x7d4bf000-0x7fffffff]
<6>[    0.000000] ACPI: Early table checksum verification disabled
<4>[    0.000000] ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL  )
<4>[    0.000000] ACPI: XSDT 0x00000000CF67DE18 000064 (v01 DELL   E2       06222004 MSFT 00010013)
<4>[    0.000000] ACPI: FACP 0x00000000CF75FC18 0000F4 (v04 DELL   E2       06222004 MSFT 00010013)
<4>[    0.000000] ACPI: DSDT 0x00000000CF73E018 00A6C0 (v01 DELL   E2       00001001 INTL 20080729)
<4>[    0.000000] ACPI: FACS 0x00000000CF76BF40 000040
<4>[    0.000000] ACPI: FACS 0x00000000CF76ED40 000040
<4>[    0.000000] ACPI: APIC 0x00000000CF67CF18 00008C (v02 DELL   E2       06222004 MSFT 00010013)
<4>[    0.000000] ACPI: TCPA 0x00000000CF76DD18 000032 (v02                 00000000      00000000)
<4>[    0.000000] ACPI: MCFG 0x00000000CF76DC98 00003C (v01 A M I  GMCH945. 06222004 MSFT 00000097)
<4>[    0.000000] ACPI: HPET 0x00000000CF76DC18 000038 (v01 DELL   E2       00000001 ASL  00000061)
<4>[    0.000000] ACPI: BOOT 0x00000000CF76DB98 000028 (v01 DELL   E2       06222004 AMI  00010013)
<4>[    0.000000] ACPI: SLIC 0x00000000CF766818 000176 (v03 DELL   E2       06222004 MSFT 00010013)
<4>[    0.000000] ACPI: SSDT 0x00000000CF74D018 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20080729)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] No NUMA configuration found
<6>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012bffffff]
<6>[    0.000000] NODE_DATA(0) allocated [mem 0x12bff8000-0x12bffbfff]
<6>[    0.000000] Zone ranges:
<6>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000012bffffff]
<6>[    0.000000] Movable zone start for each node
<6>[    0.000000] Early memory node ranges
<6>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000094fff]
<6>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cf65efff]
<6>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000012bffffff]
<6>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012bffffff]
<7>[    0.000000] On node 0 totalpages: 1029619
<7>[    0.000000]   DMA zone: 64 pages used for memmap
<7>[    0.000000]   DMA zone: 21 pages reserved
<7>[    0.000000]   DMA zone: 3988 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 13210 pages used for memmap
<7>[    0.000000]   DMA32 zone: 845407 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 2816 pages used for memmap
<7>[    0.000000]   Normal zone: 180224 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<6>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
<6>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x00095fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x00096000-0x0009ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xcf65f000-0xcf67efff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xcf67f000-0xcf76efff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xcf76f000-0xcfffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
<6>[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
<6>[    0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.000000] percpu: Embedded 33 pages/cpu @ffff88012bc00000 s96536 r8192 d30440 u262144
<7>[    0.000000] pcpu-alloc: s96536 r8192 d30440 u262144 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
<6>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1013508
<6>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=x86_64/vmlinuz initrd=x86_64/all.rdz  noiswmd vga=788 splash quiet
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<7>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
<7>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>[    0.000000] Memory: 3925504K/4118476K available (7177K kernel code, 1150K rwdata, 3328K rodata, 1352K init, 812K bss, 192972K reserved, 0K cma-reserved)
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
<6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
<6>[    0.000000] NR_IRQS:4352 nr_irqs:488 16
<6>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<7>[    0.000000] hpet clockevent registered
<6>[    0.000000] tsc: Fast TSC calibration using PIT
<7>[    0.000000] spurious 8259A interrupt: IRQ7.
<6>[    0.000000] tsc: Detected 2660.236 MHz processor
<6>[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.47 BogoMIPS (lpj=2660236)
<6>[    0.000034] pid_max: default: 32768 minimum: 301
<6>[    0.000038] ACPI: Core revision 20160108
<4>[    0.007070] ACPI: 2 ACPI AML tables successfully acquired and loaded
<4>[    0.007072] 
<6>[    0.007090] Security Framework initialized
<6>[    0.007092] TOMOYO Linux initialized
<6>[    0.007323] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[    0.008313] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[    0.008746] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.008751] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.009020] CPU: Physical Processor ID: 0
<6>[    0.009022] CPU: Processor Core ID: 0
<6>[    0.009028] mce: CPU supports 9 MCE banks
<6>[    0.009042] process: using mwait in idle threads
<6>[    0.009046] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
<6>[    0.009047] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
<6>[    0.009363] Freeing SMP alternatives memory: 28K (ffffffff81e73000 - ffffffff81e7a000)
<6>[    0.011658] ftrace: allocating 27673 entries in 109 pages
<6>[    0.023482] smpboot: Max logical packages: 4
<6>[    0.023486] smpboot: APIC(0) Converting physical 0 to logical package 0
<6>[    0.023900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
<6>[    0.135755] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 560  @ 2.67GHz (family: 0x6, model: 0x25, stepping: 0x5)
<6>[    0.135774] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
<4>[    0.135790] core: CPUID marked event: 'bus cycles' unavailable
<6>[    0.135793] ... version:                3
<6>[    0.135793] ... bit width:              48
<6>[    0.135794] ... generic registers:      4
<6>[    0.135795] ... value mask:             0000ffffffffffff
<6>[    0.135796] ... max period:             000000007fffffff
<6>[    0.135797] ... fixed-purpose events:   3
<6>[    0.135797] ... event mask:             000000070000000f
<6>[    0.136336] x86: Booting SMP configuration:
<6>[    0.136338] .... node  #0, CPUs:      #1 #2 #3
<6>[    0.322792] x86: Booted up 1 node, 4 CPUs
<6>[    0.322798] smpboot: Total of 4 processors activated (21279.59 BogoMIPS)
<6>[    0.325279] devtmpfs: initialized
<6>[    0.325340] x86/mm: Memory block size: 128MB
<6>[    0.327399] PM: Registering ACPI NVS region [mem 0xcf67f000-0xcf76efff] (983040 bytes)
<6>[    0.327480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.327537] xor: measuring software checksum speed
<6>[    0.336725]    prefetch64-sse: 15288.000 MB/sec
<6>[    0.346723]    generic_sse: 13096.000 MB/sec
<6>[    0.346724] xor: using function: prefetch64-sse (15288.000 MB/sec)
<6>[    0.346731] pinctrl core: initialized pinctrl subsystem
<6>[    0.346840] RTC time: 18:03:26, date: 06/11/16
<6>[    0.346944] NET: Registered protocol family 16
<6>[    0.350729] cpuidle: using governor ladder
<6>[    0.354727] cpuidle: using governor menu
<6>[    0.354796] Simple Boot Flag at 0xf1 set to 0x1
<6>[    0.354843] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[    0.354845] ACPI: bus type PCI registered
<6>[    0.354846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.354911] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
<6>[    0.354914] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
<6>[    0.354918] PCI: Using configuration type 1 for base access
<6>[    0.354925] dmi type 0xB1 record - unknown flag
<6>[    0.359910] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<6>[    0.376724] raid6: sse2x1   gen()  7136 MB/s
<6>[    0.393716] raid6: sse2x1   xor()  5710 MB/s
<6>[    0.410717] raid6: sse2x2   gen()  8519 MB/s
<6>[    0.427712] raid6: sse2x2   xor()  6746 MB/s
<6>[    0.444877] raid6: sse2x4   gen()  9761 MB/s
<6>[    0.461709] raid6: sse2x4   xor()  7349 MB/s
<6>[    0.461711] raid6: using algorithm sse2x4 gen() 9761 MB/s
<6>[    0.461712] raid6: .... xor() 7349 MB/s, rmw enabled
<6>[    0.461713] raid6: using ssse3x2 recovery algorithm
<6>[    0.461788] ACPI: Added _OSI(Module Device)
<6>[    0.461790] ACPI: Added _OSI(Processor Device)
<6>[    0.461791] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.461792] ACPI: Added _OSI(Processor Aggregator Device)
<5>[    0.465805] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
<4>[    0.476363] ACPI: Dynamic OEM Table Load:
<4>[    0.476369] ACPI: SSDT 0xFFFF880126669000 000474 (v01 PmRef  Cpu0Ist  00003000 INTL 20080729)
<4>[    0.476733] ACPI: Dynamic OEM Table Load:
<4>[    0.476739] ACPI: SSDT 0xFFFF8801266B8000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20080729)
<4>[    0.477304] ACPI: Dynamic OEM Table Load:
<4>[    0.477308] ACPI: SSDT 0xFFFF880126671000 000303 (v01 PmRef  ApIst    00003000 INTL 20080729)
<4>[    0.477677] ACPI: Dynamic OEM Table Load:
<4>[    0.477680] ACPI: SSDT 0xFFFF8801265E7400 000119 (v01 PmRef  ApCst    00003000 INTL 20080729)
<6>[    0.478380] ACPI : EC: EC started
<6>[    0.479338] ACPI: Interpreter enabled
<6>[    0.479356] ACPI: (supports S0 S3 S4 S5)
<6>[    0.479357] ACPI: Using IOAPIC for interrupt routing
<6>[    0.479379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.493966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
<6>[    0.493972] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<7>[    0.494000] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
<7>[    0.494001] _OSC request data: 1 1f 0
<6>[    0.494005] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
<6>[    0.494369] PCI host bridge to bus 0000:00
<6>[    0.494371] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    0.494373] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    0.494374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    0.494376] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
<6>[    0.494378] pci_bus 0000:00: root bus resource [bus 00-3e]
<7>[    0.494385] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
<6>[    0.494405] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
<7>[    0.494468] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
<7>[    0.494498] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>[    0.494533] pci 0000:00:01.0: System wakeup disabled by ACPI
<7>[    0.494597] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
<7>[    0.494619] pci 0000:00:19.0: reg 0x10: [mem 0xe9600000-0xe961ffff]
<7>[    0.494630] pci 0000:00:19.0: reg 0x14: [mem 0xe9680000-0xe9680fff]
<7>[    0.494641] pci 0000:00:19.0: reg 0x18: [io  0x8040-0x805f]
<7>[    0.494727] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
<6>[    0.494770] pci 0000:00:19.0: System wakeup disabled by ACPI
<7>[    0.494807] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
<7>[    0.494827] pci 0000:00:1a.0: reg 0x10: [mem 0xe9670000-0xe96703ff]
<7>[    0.494927] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
<6>[    0.494966] pci 0000:00:1a.0: System wakeup disabled by ACPI
<7>[    0.495003] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
<7>[    0.495026] pci 0000:00:1b.0: reg 0x10: [mem 0xe9660000-0xe9663fff 64bit]
<7>[    0.495130] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[    0.495176] pci 0000:00:1b.0: System wakeup disabled by ACPI
<7>[    0.495211] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
<7>[    0.495306] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    0.495350] pci 0000:00:1c.0: System wakeup disabled by ACPI
<7>[    0.495385] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
<7>[    0.495481] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>[    0.495524] pci 0000:00:1c.1: System wakeup disabled by ACPI
<7>[    0.495560] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
<7>[    0.495656] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
<6>[    0.495704] pci 0000:00:1c.2: System wakeup disabled by ACPI
<7>[    0.495741] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
<7>[    0.495837] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
<6>[    0.495881] pci 0000:00:1c.3: System wakeup disabled by ACPI
<7>[    0.495923] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
<7>[    0.495944] pci 0000:00:1d.0: reg 0x10: [mem 0xe9650000-0xe96503ff]
<7>[    0.496043] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
<6>[    0.496082] pci 0000:00:1d.0: System wakeup disabled by ACPI
<7>[    0.496115] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
<6>[    0.496213] pci 0000:00:1e.0: System wakeup disabled by ACPI
<7>[    0.496246] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
<7>[    0.496409] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
<7>[    0.496430] pci 0000:00:1f.2: reg 0x10: [io  0x8090-0x8097]
<7>[    0.496440] pci 0000:00:1f.2: reg 0x14: [io  0x8080-0x8083]
<7>[    0.496451] pci 0000:00:1f.2: reg 0x18: [io  0x8070-0x8077]
<7>[    0.496461] pci 0000:00:1f.2: reg 0x1c: [io  0x8060-0x8063]
<7>[    0.496471] pci 0000:00:1f.2: reg 0x20: [io  0x8020-0x803f]
<7>[    0.496482] pci 0000:00:1f.2: reg 0x24: [mem 0xe9640000-0xe96407ff]
<7>[    0.496540] pci 0000:00:1f.2: PME# supported from D3hot
<7>[    0.496610] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
<7>[    0.496630] pci 0000:00:1f.3: reg 0x10: [mem 0xe9630000-0xe96300ff 64bit]
<7>[    0.496659] pci 0000:00:1f.3: reg 0x20: [io  0x8000-0x801f]
<7>[    0.496759] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
<7>[    0.496784] pci 0000:00:1f.6: reg 0x10: [mem 0xe9620000-0xe9620fff 64bit]
<7>[    0.496960] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
<7>[    0.496969] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
<7>[    0.496978] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
<7>[    0.496986] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
<7>[    0.496992] pci 0000:01:00.0: reg 0x24: [io  0x7000-0x707f]
<7>[    0.496998] pci 0000:01:00.0: reg 0x30: [mem 0xe3000000-0xe307ffff pref]
<7>[    0.497113] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
<7>[    0.497123] pci 0000:01:00.1: reg 0x10: [mem 0xe3080000-0xe3083fff]
<6>[    0.497225] pci 0000:00:01.0: PCI bridge to [bus 01]
<7>[    0.497228] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
<7>[    0.497230] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
<6>[    0.497283] pci 0000:00:1c.0: PCI bridge to [bus 02]
<7>[    0.497288] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
<7>[    0.497292] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
<7>[    0.497442] pci 0000:03:00.0: [8086:422b] type 00 class 0x028000
<7>[    0.497505] pci 0000:03:00.0: reg 0x10: [mem 0xe6e00000-0xe6e01fff 64bit]
<7>[    0.497777] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
<6>[    0.497870] pci 0000:03:00.0: System wakeup disabled by ACPI
<6>[    0.499825] pci 0000:00:1c.1: PCI bridge to [bus 03]
<7>[    0.499830] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
<7>[    0.499834] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
<7>[    0.499962] pci 0000:04:00.0: [1180:e476] type 02 class 0x060700
<7>[    0.499988] pci 0000:04:00.0: reg 0x10: [mem 0xe5940000-0xe5940fff]
<7>[    0.500067] pci 0000:04:00.0: supports D1 D2
<7>[    0.500069] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    0.500099] pci 0000:04:00.0: System wakeup disabled by ACPI
<7>[    0.500192] pci 0000:04:00.1: [1180:e822] type 00 class 0x080501
<7>[    0.500219] pci 0000:04:00.1: reg 0x10: [mem 0xe5930000-0xe59300ff]
<7>[    0.500382] pci 0000:04:00.1: supports D1 D2
<7>[    0.500383] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.500502] pci 0000:04:00.4: [1180:e832] type 00 class 0x0c0010
<7>[    0.500529] pci 0000:04:00.4: reg 0x10: [mem 0xe5900000-0xe59007ff]
<7>[    0.500692] pci 0000:04:00.4: supports D1 D2
<7>[    0.500693] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    0.502804] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
<7>[    0.502815] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
<7>[    0.502819] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
<7>[    0.502892] pci_bus 0000:05: busn_res: can not insert [bus 05-ff] under [bus 04-05] (conflicts with (null) [bus 04-05])
<7>[    0.502897] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
<7>[    0.502899] pci_bus 0000:05: busn_res: can not insert [bus 05-08] under [bus 04-05] (conflicts with (null) [bus 04-05])
<6>[    0.502903] pci_bus 0000:05: [bus 05-08] partially hidden behind bridge 0000:04 [bus 04-05]
<4>[    0.502907] pci 0000:00:1c.2: bridge has subordinate 05 but max busn 08
<6>[    0.502977] acpiphp: Slot [1] registered
<6>[    0.502983] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
<7>[    0.502987] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
<7>[    0.502991] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
<6>[    0.503069] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
<7>[    0.503081] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
<7>[    0.503083] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
<7>[    0.503084] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
<7>[    0.503086] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
<6>[    0.504241] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
<6>[    0.504286] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
<6>[    0.504330] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
<6>[    0.504373] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
<6>[    0.504416] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
<6>[    0.504459] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
<6>[    0.504504] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
<6>[    0.504547] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
<6>[    0.505479] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
<6>[    0.505483] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
<6>[    0.505486] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
<6>[    0.505544] PCI host bridge to bus 0000:3f
<6>[    0.505546] pci_bus 0000:3f: root bus resource [bus 3f]
<7>[    0.505551] pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
<7>[    0.505590] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
<7>[    0.505633] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
<7>[    0.505670] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
<7>[    0.505710] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
<7>[    0.505747] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
<4>[    0.506783] ACPI: Enabled 3 GPEs in block 00 to 3F
<6>[    0.506833] ACPI : EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
<6>[    0.506939] vgaarb: setting as boot device: PCI:0000:01:00.0
<6>[    0.506941] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.506943] vgaarb: loaded
<6>[    0.506944] vgaarb: bridge control possible 0000:01:00.0
<5>[    0.507110] SCSI subsystem initialized
<7>[    0.507163] libata version 3.00 loaded.
<6>[    0.507261] PCI: Using ACPI for IRQ routing
<7>[    0.509412] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.509529] e820: reserve RAM buffer [mem 0x00095c00-0x0009ffff]
<7>[    0.509530] e820: reserve RAM buffer [mem 0xcf65f000-0xcfffffff]
<6>[    0.509639] NetLabel: Initializing
<6>[    0.509640] NetLabel:  domain hash size = 128
<6>[    0.509641] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.509654] NetLabel:  unlabeled traffic allowed by default
<6>[    0.509738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
<6>[    0.509742] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
<6>[    0.511773] clocksource: Switched to clocksource hpet
<5>[    0.518420] VFS: Disk quotas dquot_6.6.0
<6>[    0.518442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    0.518587] pnp: PnP ACPI init
<6>[    0.518753] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[    0.518755] system 00:00: [io  0x1000-0x1003] has been reserved
<6>[    0.518757] system 00:00: [io  0x1004-0x1013] has been reserved
<6>[    0.518758] system 00:00: [io  0xffff] has been reserved
<6>[    0.518760] system 00:00: [io  0x0400-0x047f] could not be reserved
<6>[    0.518762] system 00:00: [io  0x0500-0x057f] has been reserved
<6>[    0.518763] system 00:00: [io  0x164e-0x164f] has been reserved
<7>[    0.518767] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.518807] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    0.518829] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[    0.519567] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (disabled)
<7>[    0.519590] pnp 00:04: Plug and Play ACPI device, IDs DLL040b PNP0f13 (active)
<6>[    0.519813] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>[    0.519815] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
<6>[    0.519817] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
<6>[    0.519818] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
<6>[    0.519820] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[    0.519821] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
<6>[    0.519823] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
<6>[    0.519824] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
<6>[    0.519826] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    0.519828] system 00:05: [mem 0xe96c0000-0xe96c0fff] has been reserved
<7>[    0.519830] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[    0.522409] pnp: PnP ACPI: found 6 devices
<6>[    0.529085] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<7>[    0.529108] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
<7>[    0.529119] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
<7>[    0.529139] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-05] add_size 200000 add_align 100000
<7>[    0.529149] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-0b] add_size 200000 add_align 100000
<7>[    0.529162] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529164] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529165] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529167] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529169] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529170] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529172] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<7>[    0.529173] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
<6>[    0.529180] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe9700000-0xe98fffff 64bit pref]
<6>[    0.529183] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe9900000-0xe9afffff 64bit pref]
<6>[    0.529186] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe9b00000-0xe9cfffff 64bit pref]
<6>[    0.529189] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe9d00000-0xe9efffff 64bit pref]
<6>[    0.529192] pci 0000:00:01.0: PCI bridge to [bus 01]
<6>[    0.529194] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
<6>[    0.529197] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe30fffff]
<6>[    0.529201] pci 0000:00:1c.0: PCI bridge to [bus 02]
<6>[    0.529204] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
<6>[    0.529209] pci 0000:00:1c.0:   bridge window [mem 0xe8200000-0xe95fffff]
<6>[    0.529214] pci 0000:00:1c.0:   bridge window [mem 0xe9700000-0xe98fffff 64bit pref]
<6>[    0.529221] pci 0000:00:1c.1: PCI bridge to [bus 03]
<6>[    0.529224] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
<6>[    0.529229] pci 0000:00:1c.1:   bridge window [mem 0xe6e00000-0xe81fffff]
<6>[    0.529233] pci 0000:00:1c.1:   bridge window [mem 0xe9900000-0xe9afffff 64bit pref]
<7>[    0.529241] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
<7>[    0.529243] pci 0000:04:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
<7>[    0.529245] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
<7>[    0.529246] pci 0000:04:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
<7>[    0.529248] pci 0000:04:00.0: res[13]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
<7>[    0.529250] pci 0000:04:00.0: res[13]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
<7>[    0.529252] pci 0000:04:00.0: res[14]=[io  0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
<7>[    0.529253] pci 0000:04:00.0: res[14]=[io  0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
<6>[    0.529256] pci 0000:04:00.0: BAR 15: no space for [mem size 0x04000000 pref]
<6>[    0.529257] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x04000000 pref]
<6>[    0.529259] pci 0000:04:00.0: BAR 16: no space for [mem size 0x04000000]
<6>[    0.529261] pci 0000:04:00.0: BAR 16: failed to assign [mem size 0x04000000]
<6>[    0.529262] pci 0000:04:00.0: BAR 13: assigned [io  0x2000-0x20ff]
<6>[    0.529264] pci 0000:04:00.0: BAR 14: assigned [io  0x2400-0x24ff]
<6>[    0.529266] pci 0000:04:00.0: BAR 16: no space for [mem size 0x04000000]
<6>[    0.529268] pci 0000:04:00.0: BAR 16: failed to assign [mem size 0x04000000]
<6>[    0.529269] pci 0000:04:00.0: BAR 15: no space for [mem size 0x04000000 pref]
<6>[    0.529271] pci 0000:04:00.0: BAR 15: failed to assign [mem size 0x04000000 pref]
<6>[    0.529273] pci 0000:04:00.0: CardBus bridge to [bus 05-08]
<6>[    0.529274] pci 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
<6>[    0.529280] pci 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
<6>[    0.529285] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
<6>[    0.529288] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
<6>[    0.529294] pci 0000:00:1c.2:   bridge window [mem 0xe3100000-0xe59fffff]
<6>[    0.529298] pci 0000:00:1c.2:   bridge window [mem 0xe9b00000-0xe9cfffff 64bit pref]
<6>[    0.529305] pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
<6>[    0.529308] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
<6>[    0.529313] pci 0000:00:1c.3:   bridge window [mem 0xe5a00000-0xe6dfffff]
<6>[    0.529317] pci 0000:00:1c.3:   bridge window [mem 0xe9d00000-0xe9efffff 64bit pref]
<6>[    0.529324] pci 0000:00:1e.0: PCI bridge to [bus 0c]
<7>[    0.529339] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<7>[    0.529340] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<7>[    0.529342] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    0.529343] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff window]
<7>[    0.529345] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
<7>[    0.529346] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
<7>[    0.529348] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
<7>[    0.529349] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe95fffff]
<7>[    0.529351] pci_bus 0000:02: resource 2 [mem 0xe9700000-0xe98fffff 64bit pref]
<7>[    0.529352] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
<7>[    0.529354] pci_bus 0000:03: resource 1 [mem 0xe6e00000-0xe81fffff]
<7>[    0.529355] pci_bus 0000:03: resource 2 [mem 0xe9900000-0xe9afffff 64bit pref]
<7>[    0.529357] pci_bus 0000:04: resource 0 [io  0x2000-0x3fff]
<7>[    0.529358] pci_bus 0000:04: resource 1 [mem 0xe3100000-0xe59fffff]
<7>[    0.529359] pci_bus 0000:04: resource 2 [mem 0xe9b00000-0xe9cfffff 64bit pref]
<7>[    0.529361] pci_bus 0000:05: resource 0 [io  0x2000-0x20ff]
<7>[    0.529362] pci_bus 0000:05: resource 1 [io  0x2400-0x24ff]
<7>[    0.529364] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
<7>[    0.529365] pci_bus 0000:06: resource 1 [mem 0xe5a00000-0xe6dfffff]
<7>[    0.529366] pci_bus 0000:06: resource 2 [mem 0xe9d00000-0xe9efffff 64bit pref]
<7>[    0.529368] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7 window]
<7>[    0.529369] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff window]
<7>[    0.529371] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff window]
<7>[    0.529372] pci_bus 0000:0c: resource 7 [mem 0xd0000000-0xfeafffff window]
<6>[    0.529399] NET: Registered protocol family 2
<6>[    0.529569] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<6>[    0.529641] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
<6>[    0.529745] TCP: Hash tables configured (established 32768 bind 32768)
<6>[    0.529788] UDP hash table entries: 2048 (order: 4, 65536 bytes)
<6>[    0.529807] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
<6>[    0.529864] NET: Registered protocol family 1
<6>[    0.530267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<7>[    0.530318] PCI: CLS 64 bytes, default 64
<6>[    0.530378] Trying to unpack rootfs image as initramfs...
<6>[    3.602954] Freeing initrd memory: 44292K (ffff88007d4bf000 - ffff880080000000)
<6>[    3.602984] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[    3.602987] software IO TLB [mem 0xcb65f000-0xcf65f000] (64MB) mapped at [ffff8800cb65f000-ffff8800cf65efff]
<6>[    3.603471] futex hash table entries: 2048 (order: 5, 131072 bytes)
<6>[    3.603551] audit: initializing netlink subsys (disabled)
<5>[    3.603573] audit: type=2000 audit(1465668209.483:1): initialized
<4>[    3.604007] workingset: timestamp_bits=54 max_order=20 bucket_order=0
<6>[    3.605268] zbud: loaded
<6>[    3.606016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    3.606052] io scheduler noop registered
<6>[    3.606055] io scheduler deadline registered
<6>[    3.606080] io scheduler cfq registered (default)
<6>[    3.606838] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    3.606844] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[    3.606883] vesafb: mode is 800x600x16, linelength=1600, pages=2
<6>[    3.606884] vesafb: scrolling: redraw
<6>[    3.606886] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[    3.606898] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90000a00000, using 1875k, total 14336k
<6>[    3.633369] Console: switching to colour frame buffer device 100x37
<6>[    3.659589] fb0: VESA VGA frame buffer device
<7>[    3.659604] intel_idle: MWAIT substates: 0x1120
<7>[    3.659606] intel_idle: v0.4.1 model 0x25
<7>[    3.659723] intel_idle: lapic_timer_reliable_states 0xffffffff
<6>[    3.659758] GHES: HEST is not enabled!
<6>[    3.659821] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[    3.660185] Linux agpgart interface v0.103
<6>[    3.662840] brd: module loaded
<7>[    3.662993] ahci 0000:00:1f.2: version 3.0
<6>[    3.663201] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl RAID mode
<6>[    3.663205] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
<6>[    3.670249] scsi host0: ahci
<6>[    3.670693] scsi host1: ahci
<6>[    3.670938] scsi host2: ahci
<6>[    3.671187] scsi host3: ahci
<6>[    3.671434] scsi host4: ahci
<6>[    3.671639] scsi host5: ahci
<6>[    3.671717] ata1: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640100 irq 25
<6>[    3.671722] ata2: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640180 irq 25
<6>[    3.671724] ata3: DUMMY
<6>[    3.671726] ata4: DUMMY
<6>[    3.671730] ata5: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640300 irq 25
<6>[    3.671734] ata6: SATA max UDMA/133 abar m2048@0xe9640000 port 0xe9640380 irq 25
<6>[    3.671912] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<4>[    3.672349] i8042: Warning: Keylock active
<6>[    3.673675] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    3.673679] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[    3.673803] mousedev: PS/2 mouse device common for all mice
<6>[    3.673852] rtc_cmos 00:01: RTC can wake from S4
<6>[    3.674002] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
<6>[    3.674044] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
<6>[    3.674062] ledtrig-cpu: registered to indicate activity on CPUs
<5>[    3.674378] Key type dns_resolver registered
<6>[    3.674385] mpls_gso: MPLS GSO support
<6>[    3.674747] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>[    3.675043] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
<6>[    3.675061] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
<6>[    3.675091] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
<6>[    3.675100] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
<6>[    3.675193] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
<6>[    3.675514] registered taskstats version 1
<6>[    3.675573] zswap: loaded using pool lzo/zbud
<6>[    3.676337] Btrfs loaded
<6>[    3.676958]   Magic number: 4:249:89
<6>[    3.677135] rtc_cmos 00:01: setting system clock to 2016-06-11 18:03:30 UTC (1465668210)
<6>[    3.677260] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<7>[    3.677412] PM: Hibernation image not present or could not be loaded.
<6>[    3.976423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[    3.976461] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.976576] ata5: SATA link down (SStatus 0 SControl 300)
<6>[    3.976606] ata6: SATA link down (SStatus 0 SControl 300)
<6>[    3.976953] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A3S, KD02, max UDMA/100
<6>[    3.978279] ata2.00: configured for UDMA/100
<6>[    3.980537] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
<6>[    3.980989] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
<6>[    3.980994] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    3.986142] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
<6>[    3.986638] ata1.00: configured for UDMA/133
<5>[    3.987078] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
<5>[    3.997911] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
<5>[    3.997917] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[    3.998265] sd 0:0:0:0: [sda] Write Protect is off
<7>[    3.998273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    3.998379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    3.999621] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DU-8A3S  KD02 PQ: 0 ANSI: 5
<6>[    4.089386]  sda: sda1 < sda5 sda6 sda7 sda8 sda9 >
<5>[    4.090120] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    4.091244] Freeing unused kernel memory: 1352K (ffffffff81d21000 - ffffffff81e73000)
<6>[    4.091246] Write protecting the kernel read-only data: 12288k
<6>[    4.091621] Freeing unused kernel memory: 1000K (ffff880001706000 - ffff880001800000)
<6>[    4.093210] Freeing unused kernel memory: 768K (ffff880001b40000 - ffff880001c00000)
<30>[    4.174497] dracut: dracut-044
<5>[    4.298857] random: systemd-udevd urandom read with 32 bits of entropy available
<6>[    4.357281] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
<6>[    4.368671] acpi device:02: registered as cooling_device4
<6>[    4.370762] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input2
<7>[    4.375030] parport_pc 00:03: [io  0x0378-0x037b]
<7>[    4.375037] parport_pc 00:03: [io  0x0278-0x027b]
<7>[    4.375041] parport_pc 00:03: [io  0x03bc-0x03bf]
<7>[    4.375045] parport_pc 00:03: [io  0x0378-0x037b]
<7>[    4.375131] parport_pc 00:03: [irq 7]
<6>[    4.376649] wmi: Mapper loaded
<6>[    4.376993] parport_pc 00:03: activated
<6>[    4.376998] parport_pc 00:03: reported by Plug and Play ACPI
<6>[    4.381000] pps_core: LinuxPPS API ver. 1 registered
<6>[    4.381001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    4.382225] PTP clock support registered
<6>[    4.395032] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
<6>[    4.395033] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[    4.395301] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[    4.406192] ACPI: bus type USB registered
<6>[    4.406225] usbcore: registered new interface driver usbfs
<6>[    4.406237] usbcore: registered new interface driver hub
<6>[    4.406270] usbcore: registered new device driver usb
<6>[    4.411357] yenta_cardbus 0000:04:00.0: CardBus bridge found [1028:040b]
<6>[    4.411390] yenta_cardbus 0000:04:00.0: CardBus bridge to [bus 05-08]
<6>[    4.411393] yenta_cardbus 0000:04:00.0:   bridge window [io  0x2000-0x20ff]
<6>[    4.411401] yenta_cardbus 0000:04:00.0:   bridge window [io  0x2400-0x24ff]
<6>[    4.411409] yenta_cardbus 0000:04:00.0:   bridge window [mem 0xe3100000-0xe44fffff pref]
<6>[    4.411414] yenta_cardbus 0000:04:00.0:   bridge window [mem 0xe4800000-0xe4bfffff]
<6>[    4.411706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    4.412476] ehci-pci: EHCI PCI platform driver
<6>[    4.428177] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
<6>[    4.428179] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    4.428364] sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>[    4.440254] sdhci: Secure Digital Host Controller Interface driver
<6>[    4.440258] sdhci: Copyright(c) Pierre Ossman
<6>[    4.462521] Intel(R) Wireless WiFi driver for Linux
<6>[    4.462525] Copyright(c) 2003- 2015 Intel Corporation
<4>[    4.462793] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
<6>[    4.464138] SSE version of gcm_enc/dec engaged.
<4>[    4.466976] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
<4>[    4.466981] iwlwifi 0000:03:00.0: Falling back to user helper
<6>[    4.474763] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
<6>[    4.490787] dell_laptop: Symbols from dell-rbtn acpi driver are not available
<6>[    4.490791] dell_laptop: Using i8042 filter function for receiving events
<6>[    4.521648] ppdev: user-space parallel port driver
<4>[    4.523306] dell_wmi: Dell descriptor buffer has invalid buffer length (128)
<6>[    4.523308] dell_wmi: Detected Dell WMI interface version 1
<6>[    4.523385] input: Dell WMI hotkeys as /devices/virtual/input/input4
<6>[    4.535169] yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0000, PCI irq 18
<6>[    4.535175] yenta_cardbus 0000:04:00.0: Socket status: 30000006
<4>[    4.535178] pci_bus 0000:05: Upper limit for fixing this bridge's parent bridge: #05
<6>[    4.535184] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
<6>[    4.535186] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xe3100000-0xe59fffff]
<6>[    4.535188] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe3100000-0xe59fffff:
<0>[    4.535193]  excluding 0xe3100000-0xe4d2ffff 0xe5770000-0xe59fffff
<6>[    4.535198] yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge window: [mem 0xe9b00000-0xe9cfffff 64bit pref]
<6>[    4.535199] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe9b00000-0xe9cfffff:
<0>[    4.535202]  excluding 0xe9b00000-0xe9cfffff
<6>[    4.542537] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
<0>[    4.542546]  excluding 0xc0000-0xfffff
<6>[    4.542572] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
<0>[    4.542576]  excluding 0xa0000000-0xa0ffffff
<6>[    4.542601] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
<0>[    4.542606]  excluding 0x60000000-0x60ffffff
<5>[    4.588582] firewire_ohci 0000:04:00.4: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
<6>[    4.588752] sdhci-pci 0000:04:00.1: SDHCI controller found [1180:e822] (rev 3)
<6>[    4.590482] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
<6>[    4.603481] tsc: Refined TSC clocksource calibration: 2659.999 MHz
<6>[    4.603487] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657a34898c, max_idle_ns: 440795323804 ns
<6>[    4.640873] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:26:0a:32:93:a2
<6>[    4.640877] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
<6>[    4.640929] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2041FF-0FF
<6>[    4.641193] ehci-pci 0000:00:1a.0: EHCI Host Controller
<6>[    4.641202] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>[    4.641218] ehci-pci 0000:00:1a.0: debug port 2
<7>[    4.645156] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
<6>[    4.645171] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe9670000
<6>[    4.650484] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
<6>[    4.650578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    4.650583] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    4.650587] usb usb1: Product: EHCI Host Controller
<6>[    4.650590] usb usb1: Manufacturer: Linux 4.6.2-desktop-1.mga6 ehci_hcd
<6>[    4.650593] usb usb1: SerialNumber: 0000:00:1a.0
<6>[    4.650787] hub 1-0:1.0: USB hub found
<6>[    4.650797] hub 1-0:1.0: 3 ports detected
<6>[    4.651018] ehci-pci 0000:00:1d.0: EHCI Host Controller
<6>[    4.651023] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
<6>[    4.651036] ehci-pci 0000:00:1d.0: debug port 2
<7>[    4.654952] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
<6>[    4.654963] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe9650000
<6>[    4.660507] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
<6>[    4.660618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    4.660623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    4.660627] usb usb2: Product: EHCI Host Controller
<6>[    4.660630] usb usb2: Manufacturer: Linux 4.6.2-desktop-1.mga6 ehci_hcd
<6>[    4.660633] usb usb2: SerialNumber: 0000:00:1d.0
<6>[    4.660847] hub 2-0:1.0: USB hub found
<6>[    4.660856] hub 2-0:1.0: 3 ports detected
<0>[    4.661106] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801F conflicts with OpRegion 0x0000000000008000-0x000000000000800F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
<6>[    4.661112] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<6>[    4.661150] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
<6>[    4.661814] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
<6>[    4.661910] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
<6>[    4.952448] usb 1-1: new high-speed USB device number 2 using ehci-pci
<5>[    4.960621] random: nonblocking pool is initialized
<6>[    4.962400] usb 2-1: new high-speed USB device number 2 using ehci-pci
<6>[    5.066857] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
<6>[    5.066863] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[    5.067386] hub 1-1:1.0: USB hub found
<6>[    5.067441] hub 1-1:1.0: 6 ports detected
<6>[    5.076852] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
<6>[    5.076858] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>[    5.077354] hub 2-1:1.0: USB hub found
<6>[    5.077763] hub 2-1:1.0: 8 ports detected
<5>[    5.089487] firewire_core 0000:04:00.4: created device fw0: GUID 02e07681474fc000, S400
<6>[    5.353409] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
<6>[    5.464107] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
<6>[    5.464113] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    5.464116] usb 2-1.8: Product: 5880
<6>[    5.464119] usb 2-1.8: Manufacturer: Broadcom Corp
<6>[    5.464121] usb 2-1.8: SerialNumber: 0123456789ABCD
<4>[    5.464397] usb 2-1.8: config 0 descriptor??
<6>[    5.603589] clocksource: Switched to clocksource tsc
<6>[    5.828381] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input5
<6>[    5.841954] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input3
<6>[    8.559496] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    8.562420] usbcore: registered new interface driver usbhid
<6>[    8.562423] usbhid: USB HID core driver
<6>[   15.070876] NET: Registered protocol family 17
<4>[   64.461178] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
<4>[   64.461181] iwlwifi 0000:03:00.0: Falling back to user helper
<6>[  124.456252] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
<6>[  124.491216] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
<6>[  124.491221] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
<6>[  124.491223] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
<6>[  124.491226] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
<6>[  124.491332] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
<7>[  124.510605] ieee80211 phy0: Failed to initialize wep: -2
<7>[  124.510628] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
<6>[  145.108944] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
<3>[  145.171908] usb 2-1.3: device descriptor read/64, error -32
<3>[  145.346921] usb 2-1.3: device descriptor read/64, error -32
<6>[  145.520906] usb 2-1.3: new full-speed USB device number 6 using ehci-pci
<3>[  145.583898] usb 2-1.3: device descriptor read/64, error -32
<3>[  145.747848] usb 2-1.3: device descriptor read/64, error -32
<6>[  145.921881] usb 2-1.3: new full-speed USB device number 7 using ehci-pci
<3>[  146.323842] usb 2-1.3: device not accepting address 7, error -32
<6>[  146.396827] usb 2-1.3: new full-speed USB device number 8 using ehci-pci
<3>[  146.798801] usb 2-1.3: device not accepting address 8, error -32
<3>[  146.798893] usb 2-1-port3: unable to enumerate USB device
<6>[  146.975777] usb 2-1.3: new full-speed USB device number 9 using ehci-pci
<6>[  147.412696] usb 2-1.3: new full-speed USB device number 10 using ehci-pci
<6>[  147.668715] usb 2-1.3: new full-speed USB device number 11 using ehci-pci
<3>[  147.731721] usb 2-1.3: device descriptor read/64, error -32
<3>[  147.905693] usb 2-1.3: device descriptor read/64, error -32
<6>[  148.079677] usb 2-1.3: new full-speed USB device number 12 using ehci-pci
<6>[  148.436646] usb 2-1.3: new full-speed USB device number 13 using ehci-pci
<3>[  148.499651] usb 2-1.3: device descriptor read/64, error -32
<3>[  148.663625] usb 2-1.3: device descriptor read/64, error -32
<6>[  148.837574] usb 2-1.3: new full-speed USB device number 14 using ehci-pci
<6>[  149.204578] usb 2-1.3: new full-speed USB device number 15 using ehci-pci
<3>[  149.277572] usb 2-1.3: device descriptor read/64, error -32
<6>[  149.716495] usb 2-1.3: new full-speed USB device number 16 using ehci-pci
<6>[  149.972508] usb 2-1.3: new full-speed USB device number 17 using ehci-pci
<3>[  150.035466] usb 2-1.3: device descriptor read/64, error -32
<6>[  150.484423] usb 2-1.3: new full-speed USB device number 18 using ehci-pci
<3>[  150.558416] usb 2-1.3: device descriptor read/64, error -32
<3>[  150.722402] usb 2-1.3: device descriptor read/64, error -32
<6>[  150.896386] usb 2-1.3: new full-speed USB device number 19 using ehci-pci
<3>[  150.959380] usb 2-1.3: device descriptor read/64, error -32
<6>[  151.508372] usb 2-1.3: new full-speed USB device number 21 using ehci-pci
<3>[  151.582364] usb 2-1.3: device descriptor read/64, error -32
<3>[  151.757312] usb 2-1.3: device descriptor read/64, error -32
<6>[  151.931315] usb 2-1.3: new full-speed USB device number 22 using ehci-pci
<3>[  152.004330] usb 2-1.3: device descriptor read/64, error -32
<3>[  152.179311] usb 2-1.3: device descriptor read/64, error -32
<6>[  152.353296] usb 2-1.3: new full-speed USB device number 23 using ehci-pci
<3>[  152.755259] usb 2-1.3: device not accepting address 23, error -32
<6>[  153.300172] usb 2-1.3: new full-speed USB device number 26 using ehci-pci
<3>[  153.373165] usb 2-1.3: device descriptor read/64, error -32
<6>[  153.812170] usb 2-1.3: new full-speed USB device number 27 using ehci-pci
<3>[  153.886122] usb 2-1.3: device descriptor read/64, error -32
<3>[  154.061146] usb 2-1.3: device descriptor read/64, error -32
<6>[  154.580058] usb 2-1.3: new full-speed USB device number 30 using ehci-pci
<6>[  154.836040] usb 2-1.3: new full-speed USB device number 31 using ehci-pci
<3>[  154.899081] usb 2-1.3: device descriptor read/64, error -32
<3>[  155.063022] usb 2-1.3: device descriptor read/64, error -32
<6>[  155.237003] usb 2-1.3: new full-speed USB device number 32 using ehci-pci
<6>[  155.604010] usb 2-1.3: new full-speed USB device number 33 using ehci-pci
<3>[  155.666964] usb 2-1.3: device descriptor read/64, error -32
<6>[  155.967974] usb 2-1.3: new full-speed USB device number 34 using ehci-pci
<3>[  156.030968] usb 2-1.3: device descriptor read/64, error -32
<3>[  156.205952] usb 2-1.3: device descriptor read/64, error -32
<6>[  156.379937] usb 2-1.3: new full-speed USB device number 35 using ehci-pci
<3>[  156.442895] usb 2-1.3: device descriptor read/64, error -32
<3>[  156.606919] usb 2-1.3: device descriptor read/64, error -32
<6>[  156.780904] usb 2-1.3: new full-speed USB device number 36 using ehci-pci
<3>[  157.182829] usb 2-1.3: device not accepting address 36, error -32
<6>[  157.255860] usb 2-1.3: new full-speed USB device number 37 using ehci-pci
<3>[  157.657824] usb 2-1.3: device not accepting address 37, error -32
<3>[  157.657928] usb 2-1-port3: unable to enumerate USB device
<6>[  177.618007] usb 2-1.3: new full-speed USB device number 39 using ehci-pci
<3>[  177.681001] usb 2-1.3: device descriptor read/64, error -32
<6>[  178.130004] usb 2-1.3: new full-speed USB device number 40 using ehci-pci
<3>[  178.202995] usb 2-1.3: device descriptor read/64, error -32
<3>[  178.366944] usb 2-1.3: device descriptor read/64, error -32
<6>[  178.540964] usb 2-1.3: new full-speed USB device number 41 using ehci-pci
<3>[  178.603959] usb 2-1.3: device descriptor read/64, error -32
<3>[  178.767908] usb 2-1.3: device descriptor read/64, error -32
<6>[  179.153874] usb 2-1.3: new full-speed USB device number 43 using ehci-pci
<3>[  179.226867] usb 2-1.3: device descriptor read/64, error -32
<6>[  179.921806] usb 2-1.3: new full-speed USB device number 45 using ehci-pci
<6>[  180.177822] usb 2-1.3: new full-speed USB device number 46 using ehci-pci
<3>[  180.251776] usb 2-1.3: device descriptor read/64, error -32
<6>[  180.689737] usb 2-1.3: new full-speed USB device number 47 using ehci-pci
<6>[  180.945751] usb 2-1.3: new full-speed USB device number 48 using ehci-pci
<3>[  181.008757] usb 2-1.3: device descriptor read/64, error -32
<6>[  181.457665] usb 2-1.3: new full-speed USB device number 49 using ehci-pci
<3>[  181.530658] usb 2-1.3: device descriptor read/64, error -32
<3>[  181.704643] usb 2-1.3: device descriptor read/64, error -32
<6>[  181.878628] usb 2-1.3: new full-speed USB device number 50 using ehci-pci
<3>[  181.941622] usb 2-1.3: device descriptor read/64, error -32
<3>[  182.105607] usb 2-1.3: device descriptor read/64, error -32
<6>[  182.279592] usb 2-1.3: new full-speed USB device number 51 using ehci-pci
<3>[  182.681556] usb 2-1.3: device not accepting address 51, error -32
<6>[  182.880538] usb 2-1.3: new full-speed USB device number 53 using ehci-pci
<3>[  182.953532] usb 2-1.3: device descriptor read/64, error -32
<6>[  183.253505] usb 2-1.3: new full-speed USB device number 54 using ehci-pci
<6>[  183.505526] usb 2-1.3: new full-speed USB device number 55 using ehci-pci
<3>[  183.568518] usb 2-1.3: device descriptor read/64, error -32
<3>[  183.732506] usb 2-1.3: device descriptor read/64, error -32
<6>[  183.906490] usb 2-1.3: new full-speed USB device number 56 using ehci-pci
<3>[  183.969444] usb 2-1.3: device descriptor read/64, error -32
<3>[  184.143465] usb 2-1.3: device descriptor read/64, error -32
<6>[  184.529396] usb 2-1.3: new full-speed USB device number 58 using ehci-pci
<3>[  184.602389] usb 2-1.3: device descriptor read/64, error -32
<3>[  184.766375] usb 2-1.3: device descriptor read/64, error -32
<6>[  185.297327] usb 2-1.3: new full-speed USB device number 60 using ehci-pci
<6>[  185.553340] usb 2-1.3: new full-speed USB device number 61 using ehci-pci
<3>[  185.626346] usb 2-1.3: device descriptor read/64, error -32
<3>[  185.800298] usb 2-1.3: device descriptor read/64, error -32
<6>[  185.974303] usb 2-1.3: new full-speed USB device number 62 using ehci-pci
<6>[  186.321232] usb 2-1.3: new full-speed USB device number 63 using ehci-pci
<3>[  186.394225] usb 2-1.3: device descriptor read/64, error -32
<6>[  186.833191] usb 2-1.3: new full-speed USB device number 64 using ehci-pci
<6>[  187.089164] usb 2-1.3: new full-speed USB device number 65 using ehci-pci
<3>[  187.152158] usb 2-1.3: device descriptor read/64, error -32
<3>[  187.327142] usb 2-1.3: device descriptor read/64, error -32
<6>[  187.501127] usb 2-1.3: new full-speed USB device number 66 using ehci-pci
<3>[  187.574120] usb 2-1.3: device descriptor read/64, error -32
<3>[  187.749105] usb 2-1.3: device descriptor read/64, error -32
<6>[  187.923089] usb 2-1.3: new full-speed USB device number 67 using ehci-pci
<3>[  188.325054] usb 2-1.3: device not accepting address 67, error -32
<6>[  188.398047] usb 2-1.3: new full-speed USB device number 68 using ehci-pci
<3>[  188.800011] usb 2-1.3: device not accepting address 68, error -32
<3>[  188.800169] usb 2-1-port3: unable to enumerate USB device
<6>[  265.758619] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
<6>[  265.765486] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
<6>[  265.765578] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
<6>[  265.982790] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
<6>[  265.989667] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
<6>[  265.989758] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
<6>[  269.261476] wlan0: authenticate with 84:1b:5e:44:cf:f2
<6>[  269.263708] wlan0: send auth to 84:1b:5e:44:cf:f2 (try 1/3)
<6>[  269.265547] wlan0: authenticated
<6>[  269.265565] wlan0: waiting for beacon from 84:1b:5e:44:cf:f2
<6>[  269.270871] wlan0: associate with 84:1b:5e:44:cf:f2 (try 1/3)
<6>[  269.274393] wlan0: RX AssocResp from 84:1b:5e:44:cf:f2 (capab=0x401 status=0 aid=3)
<6>[  269.277730] wlan0: associated
<6>[  297.457721] loop: module loaded
<6>[  297.462670] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<30>[  297.512228] dracut: Mounted root filesystem none
<30>[  297.591743] dracut: Switching root
<6>[  298.981845] NET: Registered protocol family 10
<6>[  298.982084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<30>[  299.063713] systemd-udevd[708]: starting version 230
<27>[  299.391912] systemd-udevd[751]: failed to execute '/sbin/initqueue' '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0': No such file or directory
<28>[  299.392096] systemd-udevd[723]: Process '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0' failed with exit code 2.
<6>[  319.462132] Floppy drive(s): fd0 is 1.44M
<6>[  322.475258] floppy0: no floppy controllers found
<6>[  322.475272] work still pending
<6>[  326.852804] usb 2-1.3: new full-speed USB device number 69 using ehci-pci
<3>[  326.926790] usb 2-1.3: device descriptor read/64, error -32
<6>[  327.876709] usb 2-1.3: new full-speed USB device number 71 using ehci-pci
<3>[  327.950700] usb 2-1.3: device descriptor read/64, error -32
<3>[  328.125649] usb 2-1.3: device descriptor read/64, error -32
<6>[  328.299634] usb 2-1.3: new full-speed USB device number 72 using ehci-pci
<3>[  328.373627] usb 2-1.3: device descriptor read/64, error -32
<3>[  328.548648] usb 2-1.3: device descriptor read/64, error -32
<6>[  328.722633] usb 2-1.3: new full-speed USB device number 73 using ehci-pci
<3>[  329.124593] usb 2-1.3: device not accepting address 73, error -32
<6>[  329.324580] usb 2-1.3: new full-speed USB device number 75 using ehci-pci
<3>[  329.398570] usb 2-1.3: device descriptor read/64, error -32
<6>[  332.996248] usb 2-1.4: new full-speed USB device number 76 using ehci-pci
<3>[  333.070246] usb 2-1.4: device descriptor read/64, error -32
<3>[  333.245230] usb 2-1.4: device descriptor read/64, error -32
<6>[  333.419215] usb 2-1.4: new full-speed USB device number 77 using ehci-pci
<3>[  333.493205] usb 2-1.4: device descriptor read/64, error -32
<6>[  333.795178] usb 2-1.4: new full-speed USB device number 78 using ehci-pci
<3>[  333.869174] usb 2-1.4: device descriptor read/64, error -32
<6>[  334.276139] usb 2-1.4: new full-speed USB device number 79 using ehci-pci
<3>[  334.350131] usb 2-1.4: device descriptor read/64, error -32
<3>[  334.525151] usb 2-1.4: device descriptor read/64, error -32
<6>[  334.699064] usb 2-1.4: new full-speed USB device number 80 using ehci-pci
<3>[  334.773091] usb 2-1.4: device descriptor read/64, error -32
<3>[  334.948079] usb 2-1.4: device descriptor read/64, error -32
<6>[  335.122074] usb 2-1.4: new full-speed USB device number 81 using ehci-pci
<3>[  335.524029] usb 2-1.4: device not accepting address 81, error -32
<6>[  335.597022] usb 2-1.4: new full-speed USB device number 82 using ehci-pci
<3>[  335.998951] usb 2-1.4: device not accepting address 82, error -32
<3>[  335.999150] usb 2-1-port4: unable to enumerate USB device
<6>[  336.323957] usb 2-1.4: new full-speed USB device number 84 using ehci-pci
<3>[  336.397947] usb 2-1.4: device descriptor read/64, error -32
<6>[  336.835911] usb 2-1.4: new full-speed USB device number 85 using ehci-pci
<3>[  336.909904] usb 2-1.4: device descriptor read/64, error -32
<3>[  337.084853] usb 2-1.4: device descriptor read/64, error -32
<6>[  337.258836] usb 2-1.4: new full-speed USB device number 86 using ehci-pci
<6>[  337.603794] usb 2-1.4: new full-speed USB device number 87 using ehci-pci
<3>[  337.666807] usb 2-1.4: device descriptor read/64, error -32
<3>[  337.841824] usb 2-1.4: device descriptor read/64, error -32
<6>[  338.015772] usb 2-1.4: new full-speed USB device number 88 using ehci-pci
<6>[  338.371775] usb 2-1.4: new full-speed USB device number 89 using ehci-pci
<3>[  338.445817] usb 2-1.4: device descriptor read/64, error -32
<3>[  338.609695] usb 2-1.4: device descriptor read/64, error -32
<6>[  339.139680] usb 2-1.4: new full-speed USB device number 92 using ehci-pci
<6>[  339.395643] usb 2-1.4: new full-speed USB device number 93 using ehci-pci
<3>[  339.458653] usb 2-1.4: device descriptor read/64, error -32
<3>[  339.633634] usb 2-1.4: device descriptor read/64, error -32
<6>[  339.807656] usb 2-1.4: new full-speed USB device number 94 using ehci-pci
<6>[  339.870339] Floppy drive(s): fd0 is 1.44M
<3>[  339.881663] usb 2-1.4: device descriptor read/64, error -32
<6>[  340.419593] usb 2-1.4: new full-speed USB device number 95 using ehci-pci
<3>[  340.493585] usb 2-1.4: device descriptor read/64, error -32
<3>[  340.668604] usb 2-1.4: device descriptor read/64, error -32
<6>[  340.842517] usb 2-1.4: new full-speed USB device number 96 using ehci-pci
<3>[  340.916547] usb 2-1.4: device descriptor read/64, error -32
<6>[  341.218520] usb 2-1.4: new full-speed USB device number 97 using ehci-pci
<3>[  341.292514] usb 2-1.4: device descriptor read/64, error -32
<3>[  341.467466] usb 2-1.4: device descriptor read/64, error -32
<6>[  341.641483] usb 2-1.4: new full-speed USB device number 98 using ehci-pci
<6>[  341.955452] usb 2-1.4: new full-speed USB device number 99 using ehci-pci
<6>[  342.211433] usb 2-1.4: new full-speed USB device number 100 using ehci-pci
<3>[  342.285423] usb 2-1.4: device descriptor read/64, error -32
<6>[  342.723387] usb 2-1.4: new full-speed USB device number 101 using ehci-pci
<3>[  342.797379] usb 2-1.4: device descriptor read/64, error -32
<6>[  342.889485] floppy0: no floppy controllers found
<6>[  342.889500] work still pending
<3>[  342.972367] usb 2-1.4: device descriptor read/64, error -32
<6>[  343.273340] usb 2-1.4: new full-speed USB device number 103 using ehci-pci
<3>[  343.347331] usb 2-1.4: device descriptor read/64, error -32
<3>[  343.522315] usb 2-1.4: device descriptor read/64, error -32
<6>[  343.696298] usb 2-1.4: new full-speed USB device number 104 using ehci-pci
<6>[  344.003270] usb 2-1.4: new full-speed USB device number 105 using ehci-pci
<3>[  344.077262] usb 2-1.4: device descriptor read/64, error -32
<6>[  344.515227] usb 2-1.4: new full-speed USB device number 106 using ehci-pci
<6>[  344.771205] usb 2-1.4: new full-speed USB device number 107 using ehci-pci
<6>[  345.027147] usb 2-1.4: new full-speed USB device number 108 using ehci-pci
<3>[  345.101171] usb 2-1.4: device descriptor read/64, error -32
<6>[  345.539136] usb 2-1.4: new full-speed USB device number 109 using ehci-pci
<6>[  345.795116] usb 2-1.4: new full-speed USB device number 110 using ehci-pci
<3>[  345.869121] usb 2-1.4: device descriptor read/64, error -32
<6>[  346.307068] usb 2-1.4: new full-speed USB device number 111 using ehci-pci
<6>[  346.819022] usb 2-1.4: new full-speed USB device number 113 using ehci-pci
<3>[  346.893012] usb 2-1.4: device descriptor read/64, error -32
<6>[  347.330976] usb 2-1.4: new full-speed USB device number 114 using ehci-pci
<6>[  347.586954] usb 2-1.4: new full-speed USB device number 115 using ehci-pci
<3>[  347.660929] usb 2-1.4: device descriptor read/64, error -32
<3>[  347.835931] usb 2-1.4: device descriptor read/64, error -32
<6>[  348.354886] usb 2-1.4: new full-speed USB device number 117 using ehci-pci
<3>[  348.428875] usb 2-1.4: device descriptor read/64, error -32
<3>[  348.603863] usb 2-1.4: device descriptor read/64, error -32
<6>[  348.904833] usb 2-1.4: new full-speed USB device number 119 using ehci-pci
<3>[  348.978829] usb 2-1.4: device descriptor read/64, error -32
<3>[  349.153814] usb 2-1.4: device descriptor read/64, error -32
<6>[  349.327799] usb 2-1.4: new full-speed USB device number 120 using ehci-pci
<3>[  349.401791] usb 2-1.4: device descriptor read/64, error -32
<3>[  349.576773] usb 2-1.4: device descriptor read/64, error -32
<6>[  349.750726] usb 2-1.4: new full-speed USB device number 121 using ehci-pci
<3>[  350.152688] usb 2-1.4: device not accepting address 121, error -32
<6>[  350.225677] usb 2-1.4: new full-speed USB device number 122 using ehci-pci
<3>[  350.627683] usb 2-1.4: device not accepting address 122, error -32
<3>[  350.627827] usb 2-1-port4: unable to enumerate USB device
<6>[  364.763428] usb 2-1.4: new full-speed USB device number 123 using ehci-pci
<6>[  429.499619] usb 2-1.4: new full-speed USB device number 124 using ehci-pci
<6>[  429.639750] usb 2-1.4: New USB device found, idVendor=0644, idProduct=0000
<6>[  429.639755] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[  429.639759] usb 2-1.4: Product: TEAC FD-05PUW   
<6>[  429.639762] usb 2-1.4: Manufacturer: TEAC    
<6>[  429.647070] usb-storage 2-1.4:1.0: USB Mass Storage device detected
<6>[  429.647164] scsi host6: usb-storage 2-1.4:1.0
<6>[  429.647228] usbcore: registered new interface driver usb-storage
<5>[  430.699767] scsi 6:0:0:0: Direct-Access     TEAC     FD-05PUW         3000 PQ: 0 ANSI: 0 CCS
<5>[  430.827850] sd 6:0:0:0: [sdb] 2880 512-byte logical blocks: (1.47 MB/1.41 MiB)
<5>[  430.859873] sd 6:0:0:0: [sdb] Write Protect is off
<7>[  430.859880] sd 6:0:0:0: [sdb] Mode Sense: 00 46 94 00
<3>[  430.891848] sd 6:0:0:0: [sdb] No Caching mode page found
<3>[  430.891854] sd 6:0:0:0: [sdb] Assuming drive cache: write through
<6>[  431.243762]  sdb:
<5>[  431.467776] sd 6:0:0:0: [sdb] Attached SCSI removable disk
<6>[  442.723501] Floppy drive(s): fd0 is 1.44M
<6>[  445.744281] floppy0: no floppy controllers found
<6>[  445.744295] work still pending
<3>[  489.030613] EXT4-fs (sdb): VFS: Can't find ext4 filesystem

Actions: View

Attachments on bug 18662: 7973 | 7974 | 7975 | 7976 | 7979 | 7980 | 7981 | 7982