Attachment 713 Details for Bug 2366 – dmesg

dmesg

dmesg (text/plain), 32.83 KB, created by Antonis Tsolomitis on 2011-08-09 16:51:52 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Antonis Tsolomitis

Created: 2011-08-09 16:51:52 CEST

Size: 32.83 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.8-desktop-4.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Jul 8 02:08:49 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
> BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data)
> BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 000000008ff80000 - 0000000090000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU!
>DMI present.
>DMI: TOSHIBA Satellite P10/DAW01/DAL01, BIOS V1.60 11/17/2005
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7ff70 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-D3FFF write-back
>  D4000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07FF80000 mask FFFF80000 uncachable
>  2 base 08FF80000 mask FFFF80000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [c00f66a0] f66a0
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000333fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0033000000 page 2M
> 0033000000 - 00333fe000 page 4k
>kernel direct mapping tables up to 333fe000 @ bfa000-c00000
>RAMDISK: 37bd4000 - 37ff0000
>Allocated new RAMDISK: 32fe2000 - 333fdc80
>Move RAMDISK from 0000000037bd4000 - 0000000037fefc7f to 32fe2000 - 333fdc7f
>ACPI: RSDP 000f6700 00014 (v00 PTLTD )
>ACPI: RSDT 7ff75ef6 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
>ACPI: FACP 7ff7af32 00074 (v01 TOSCPL Chinook  06040000 ATI  00000003)
>ACPI: DSDT 7ff767bc 04776 (v01 TOSCPL    SB200 06040000 MSFT 0100000E)
>ACPI: FACS 7ff7ffc0 00040
>ACPI: APIC 7ff7afa6 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: SSDT 7ff7633e 00334 (v01  PmRef  Cpu0Ist 00003000 INTL 20030224)
>ACPI: SSDT 7ff76129 00215 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
>ACPI: SSDT 7ff75f2e 001FB (v01  PmRef    CpuPm 00003000 INTL 20030224)
>ACPI: Local APIC address 0xfee00000
>1227MB HIGHMEM available.
>819MB LOWMEM available.
>  mapped low ram: 0 - 333fe000
>  low ram: 0 - 333fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000333fe
>  HighMem  0x000333fe -> 0x0007ff70
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ff70
>On node 0 totalpages: 524031
>free_area_init_node: node 0, pgdat c069f200, node_mem_map f1fe1200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1608 pages used for memmap
>  Normal zone: 204214 pages, LIFO batch:31
>  HighMem zone: 2455 pages used for memmap
>  HighMem zone: 311771 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
>PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 12 pages/cpu @f1800000 s27904 r0 d21248 u4194304
>pcpu-alloc: s27904 r0 d21248 u4194304 alloc=1*4194304
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519936
>Kernel command line: BOOT_IMAGE=linux root=UUID=5076e9c0-9d2b-11dd-af6b-a3c36b0aa4fb usbcore.autosuspend=1 resume=UUID=0e055502-67e2-4c7a-8c0c-2b8eda4e792b splash=silent vga=788
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>allocated 10482560 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000333fe:0007ff70)
>Memory: 2057360k/2096576k available (3557k kernel code, 38764k reserved, 2238k data, 556k init, 1256904k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
>    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
>      .init : 0xc06aa000 - 0xc0735000   ( 556 kB)
>      .data : 0xc047967d - 0xc06a9040   (2238 kB)
>      .text : 0xc0100000 - 0xc047967d   (3557 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>CPU 0 irqstacks, hard=f0818000 soft=f081a000
>Console: colour dummy device 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 3066.351 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6132.70 BogoMIPS (lpj=3066351)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU0: Hyper-Threading is disabled
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 24k freed
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110112
>TOSHIBA Satellite detected - force copy of DSDT to local memory
>ACPI: Forced DSDT copy: length 0x04776 copied locally, original unmapped
>ftrace: allocating 15951 entries in 32 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...
>..... (found apic 0 pin 2) ...
>....... works.
>CPU0: Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz stepping 09
>Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>... version:                0
>... bit width:              40
>... generic registers:      18
>... value mask:             000000ffffffffff
>... max period:             0000007fffffffff
>... fixed-purpose events:   0
>... event mask:             000000000003ffff
>Brought up 1 CPUs
>Total of 1 processors activated (6132.70 BogoMIPS).
>devtmpfs: initialized
>Time: 17:37:44  Date: 08/09/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci 0000:00:00.0: [1002:5832] type 0 class 0x000600
>pci 0000:00:00.0: reg 10: [mem 0xea000000-0xebffffff pref]
>pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]
>pci 0000:00:01.0: [1002:5838] type 1 class 0x000604
>pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xe8001000-0xe8001fff]
>pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
>pci 0000:00:13.1: reg 10: [mem 0xe8002000-0xe8002fff]
>pci 0000:00:13.2: [1002:4345] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xe8003000-0xe8003fff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
>pci 0000:00:14.0: reg 10: [io  0x8060-0x806f]
>pci 0000:00:14.0: reg 14: [mem 0xe8004000-0xe80043ff]
>pci 0000:00:14.1: [1002:4349] type 0 class 0x000101
>pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:14.1: reg 20: [io  0x8070-0x807f]
>pci 0000:00:14.3: [1002:434c] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4342] type 1 class 0x000604
>pci 0000:00:14.5: [1002:4341] type 0 class 0x000401
>pci 0000:00:14.5: reg 10: [mem 0xe8004400-0xe80044ff]
>pci 0000:00:14.6: [1002:434d] type 0 class 0x000703
>pci 0000:00:14.6: reg 10: [mem 0xe8004800-0xe80048ff]
>pci 0000:01:05.0: [1002:4e50] type 0 class 0x000300
>pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
>pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
>pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
>pci 0000:02:00.0: reg 10: [mem 0xe8214000-0xe82147ff]
>pci 0000:02:00.0: reg 14: [mem 0xe8210000-0xe8213fff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:02.0: [168c:0013] type 0 class 0x000200
>pci 0000:02:02.0: reg 10: [mem 0xe8200000-0xe820ffff]
>pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
>pci 0000:02:03.0: reg 10: [io  0xa000-0xa0ff]
>pci 0000:02:03.0: reg 14: [mem 0xe8214800-0xe82148ff]
>pci 0000:02:03.0: supports D1 D2
>pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:03.0: PME# disabled
>pci 0000:02:04.0: [1524:1411] type 2 class 0x000607
>pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:02:04.0: supports D1 D2
>pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:04.0: PME# disabled
>pci 0000:02:04.2: [1524:0550] type 0 class 0x000805
>pci 0000:02:04.2: reg 10: [mem 0xe8215000-0xe82150ff]
>pci 0000:02:04.2: supports D1 D2
>pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.2: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000007ff70000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x80000000-0xfebfffff window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0000-0x001f]
>pnp 00:01: [io  0x0080-0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: [io  0x040b]
>pnp 00:01: [io  0x04d6]
>pnp 00:01: [dma 4]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x00f0-0x00fe]
>pnp 00:02: [irq 13]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:03: [io  0x0070-0x0073]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x0060]
>pnp 00:05: [io  0x0064]
>pnp 00:05: [irq 1]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:06: [irq 12]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp 00:07: [io  0x002e-0x002f]
>pnp 00:07: [io  0x004e-0x004f]
>pnp 00:07: [io  0x0072-0x0073]
>pnp 00:07: [io  0x1080]
>pnp 00:07: [io  0x00b0-0x00b1]
>pnp 00:07: [io  0x0092]
>pnp 00:07: [io  0x0200-0x020f]
>pnp 00:07: [io  0x0220-0x022f]
>pnp 00:07: [io  0x040b]
>pnp 00:07: [io  0x04d0-0x04d1]
>pnp 00:07: [io  0x04d6]
>pnp 00:07: [io  0x0530-0x0537]
>pnp 00:07: [io  0x0c00-0x0c01]
>pnp 00:07: [io  0x0c14]
>pnp 00:07: [io  0x0c50-0x0c52]
>pnp 00:07: [io  0x0c6c]
>pnp 00:07: [io  0x0c6f]
>pnp 00:07: [io  0x0cd6-0x0cd7]
>pnp 00:07: [io  0x8000-0x805f]
>pnp 00:07: [io  0x0f40-0x0f47]
>pnp 00:07: [io  0x0280-0x0293]
>system 00:07: [io  0x1080] has been reserved
>system 00:07: [io  0x0200-0x020f] has been reserved
>system 00:07: [io  0x0220-0x022f] has been reserved
>system 00:07: [io  0x040b] has been reserved
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x04d6] has been reserved
>system 00:07: [io  0x0530-0x0537] has been reserved
>system 00:07: [io  0x0c00-0x0c01] has been reserved
>system 00:07: [io  0x0c14] has been reserved
>system 00:07: [io  0x0c50-0x0c52] has been reserved
>system 00:07: [io  0x0c6c] has been reserved
>system 00:07: [io  0x0c6f] has been reserved
>system 00:07: [io  0x0cd6-0x0cd7] has been reserved
>system 00:07: [io  0x8000-0x805f] has been reserved
>system 00:07: [io  0x0f40-0x0f47] has been reserved
>system 00:07: [io  0x0280-0x0293] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [mem 0x00000000-0x0009ffff]
>pnp 00:08: [mem 0x000e0000-0x000fffff]
>pnp 00:08: [mem 0x00100000-0x7fffffff]
>pnp 00:08: [mem 0xfff80000-0xffffffff]
>pnp 00:08: [mem 0xe8000000-0xe8000fff]
>system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
>system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
>system 00:08: [mem 0xe8000000-0xe8000fff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:09: [io  0x02f8-0x02ff]
>pnp 00:09: [io  0x06f8-0x06ff]
>pnp 00:09: [irq 3]
>pnp 00:09: [dma 3]
>pnp 00:09: Plug and Play ACPI device, IDs SMCf010 (active)
>pnp 00:0a: [io  0x0378-0x037f]
>pnp 00:0a: [irq 7]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>Switching to clocksource acpi_pm
>pci 0000:00:14.4: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
>pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:02:04.0: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
>pci 0000:02:04.0: BAR 16: assigned [mem 0x94000000-0x97ffffff]
>pci 0000:02:04.0: BAR 0: assigned [mem 0xe8216000-0xe8216fff]
>pci 0000:02:04.0: BAR 0: set to [mem 0xe8216000-0xe8216fff] (PCI address [0xe8216000-0xe8216fff])
>pci 0000:02:04.0: BAR 13: assigned [io  0xa400-0xa4ff]
>pci 0000:02:04.0: BAR 14: assigned [io  0xa800-0xa8ff]
>pci 0000:02:04.0: CardBus bridge to [bus 03-03]
>pci 0000:02:04.0:   bridge window [io  0xa400-0xa4ff]
>pci 0000:02:04.0:   bridge window [io  0xa800-0xa8ff]
>pci 0000:02:04.0:   bridge window [mem 0x90000000-0x93ffffff pref]
>pci 0000:02:04.0:   bridge window [mem 0x94000000-0x97ffffff]
>pci 0000:00:14.4: PCI bridge to [bus 02-04]
>pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
>pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
>pci 0000:00:14.4:   bridge window [mem 0x90000000-0x93ffffff pref]
>pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
>pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
>pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
>pci_bus 0000:02: resource 2 [mem 0x90000000-0x93ffffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0xa400-0xa4ff]
>pci_bus 0000:03: resource 1 [io  0xa800-0xa8ff]
>pci_bus 0000:03: resource 2 [mem 0x90000000-0x93ffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x94000000-0x97ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>Switched to NOHz mode on CPU #0
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:05.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4208k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1312911464.907:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1571
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xf0000000, mapped to 0xf3c80000, using 1875k, total 65536k
>vesafb: mode is 800x600x16, linelength=1600, pages=67
>vesafb: protected mode interface info at c000:5615
>vesafb: pmi: set display start = c00c5683, set palette = c00c56bd
>vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>isapnp: Scanning for PnP cards...
>serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:14.6: PCI INT B disabled
>Linux agpgart interface v0.103
>agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset
>reserve_ram_pages_type failed 0x30b9f000-0x30ba0000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30ba8000-0x30ba9000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30ba9000-0x30baa000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30baa000-0x30bab000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30bab000-0x30bac000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30bac000-0x30bad000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30bad000-0x30bae000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30bae000-0x30baf000, track 0x10, req 0x10
>reserve_ram_pages_type failed 0x30baf000-0x30bb0000, track 0x10, req 0x10
>agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xea000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>PM: Checking hibernation image partition UUID=0e055502-67e2-4c7a-8c0c-2b8eda4e792b
>isapnp: No Plug & Play device found
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 7:73:643
>rtc_cmos 00:03: setting system clock to 2011-08-09 17:37:45 UTC (1312911465)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 556k freed
>Write protecting the kernel text: 3560k
>Write protecting the kernel read-only data: 1636k
>nash-hotplug (36): /proc/36/oom_adj is deprecated, please use /proc/36/oom_score_adj instead.
>[drm] Initialized drm 1.1.0 20060810
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
>Refined TSC clocksource calibration: 3066.774 MHz.
>Switching to clocksource tsc
>checking generic (f0000000 4000000) vs hw (f0000000 8000000)
>fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>radeon 0000:01:05.0: power state changed by ACPI to D0
>radeon 0000:01:05.0: power state changed by ACPI to D0
>radeon 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] initializing kernel modesetting (RV350 0x1002:0x4E50).
>[drm] register mmio base: 0xE8100000
>[drm] register mmio size: 65536
>agpgart-ati 0000:00:00.0: AGP 3.0 bridge
>agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
>radeon 0000:01:05.0: putting AGP V3 device into 8x mode
>radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
>[drm] Generation 2 PCI interface, using max accessible memory
>radeon 0000:01:05.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (64M used)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 402622 kiB.
>[TTM] Zone highmem: Available graphics memory: 1031074 kiB.
>[TTM] Initializing pool allocator.
>[drm] radeon: 64M of VRAM memory ready
>[drm] radeon: 32M of GTT memory ready.
>[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
>radeon 0000:01:05.0: WB disabled
>[drm] Loading R300 Microcode
>[drm] radeon: ring at 0x00000000EA001000
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Panel ID String: LGP                     
>[drm] Panel Size 1280x800
>[drm] No TV DAC info found in BIOS
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVDS
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm] fb mappable at 0xF0040000
>[drm] vram apper at 0xF0000000
>[drm] size 4096000
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8070 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8078 irq 15
>ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33
>ata2.00: configured for UDMA/33
>ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
> sda: sda1 sda2 sda3 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda2): mounted filesystem with ordered data mode
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev[108]: starting version 166
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input6
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: acpi_idle registered with cpuidle
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource acpi_pm
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xe8003000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.8-desktop-4.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
>NET: Registered protocol family 23
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.8-desktop-4.mga ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.8-desktop-4.mga ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
>smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x2f8
>ppdev: user-space parallel port driver
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>usb 2-1: New USB device found, idVendor=192f, idProduct=0416
>usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-1: Product: USB Optical Mouse
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
>generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>toshiba: not a supported Toshiba laptop
>Non-volatile memory driver v1.3
>EXT3-fs (sda2): using internal journal
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:02:04.2: SDHCI controller found [1524:0550] (rev 0)
>sdhci-pci 0000:02:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:04.2] using PIO
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda6): using internal journal
>EXT3-fs (sda6): mounted filesystem with ordered data mode
>fuse init (API version 7.16)
>p4-clockmod: Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>yenta_cardbus 0000:02:04.0: CardBus bridge found [1179:ff00]
>yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:04.0: TI: mfunc 0x81411212, devctl 0x44
>yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0850, PCI irq 16
>yenta_cardbus 0000:02:04.0: Socket status: 30000006
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe821ffff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x93ffffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x93ffffff: excluding 0x90000000-0x93ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x220-0x22f 0x280-0x297 0x2f8-0x2ff 0x370-0x37f
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xdbfff 0xe4000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>Adding 2554296k swap on /dev/sda5.  Priority:-1 extents:1 across:2554296k

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-desktop-4.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Jul 8 02:08:49 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
 BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data)
 BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS)
 BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
 BIOS-e820: 000000008ff80000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI present.
DMI: TOSHIBA Satellite P10/DAW01/DAL01, BIOS V1.60 11/17/2005
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-D3FFF write-back
  D4000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07FF80000 mask FFFF80000 uncachable
  2 base 08FF80000 mask FFFF80000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f66a0] f66a0
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000333fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0033000000 page 2M
 0033000000 - 00333fe000 page 4k
kernel direct mapping tables up to 333fe000 @ bfa000-c00000
RAMDISK: 37bd4000 - 37ff0000
Allocated new RAMDISK: 32fe2000 - 333fdc80
Move RAMDISK from 0000000037bd4000 - 0000000037fefc7f to 32fe2000 - 333fdc7f
ACPI: RSDP 000f6700 00014 (v00 PTLTD )
ACPI: RSDT 7ff75ef6 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 7ff7af32 00074 (v01 TOSCPL Chinook  06040000 ATI  00000003)
ACPI: DSDT 7ff767bc 04776 (v01 TOSCPL    SB200 06040000 MSFT 0100000E)
ACPI: FACS 7ff7ffc0 00040
ACPI: APIC 7ff7afa6 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: SSDT 7ff7633e 00334 (v01  PmRef  Cpu0Ist 00003000 INTL 20030224)
ACPI: SSDT 7ff76129 00215 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 7ff75f2e 001FB (v01  PmRef    CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
1227MB HIGHMEM available.
819MB LOWMEM available.
  mapped low ram: 0 - 333fe000
  low ram: 0 - 333fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000333fe
  HighMem  0x000333fe -> 0x0007ff70
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007ff70
On node 0 totalpages: 524031
free_area_init_node: node 0, pgdat c069f200, node_mem_map f1fe1200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1608 pages used for memmap
  Normal zone: 204214 pages, LIFO batch:31
  HighMem zone: 2455 pages used for memmap
  HighMem zone: 311771 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f1800000 s27904 r0 d21248 u4194304
pcpu-alloc: s27904 r0 d21248 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519936
Kernel command line: BOOT_IMAGE=linux root=UUID=5076e9c0-9d2b-11dd-af6b-a3c36b0aa4fb usbcore.autosuspend=1 resume=UUID=0e055502-67e2-4c7a-8c0c-2b8eda4e792b splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10482560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000333fe:0007ff70)
Memory: 2057360k/2096576k available (3557k kernel code, 38764k reserved, 2238k data, 556k init, 1256904k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
      .init : 0xc06aa000 - 0xc0735000   ( 556 kB)
      .data : 0xc047967d - 0xc06a9040   (2238 kB)
      .text : 0xc0100000 - 0xc047967d   (3557 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f0818000 soft=f081a000
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3066.351 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6132.70 BogoMIPS (lpj=3066351)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
TOSHIBA Satellite detected - force copy of DSDT to local memory
ACPI: Forced DSDT copy: length 0x04776 copied locally, original unmapped
ftrace: allocating 15951 entries in 32 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... works.
CPU0: Mobile Intel(R) Pentium(R) 4     CPU 3.06GHz stepping 09
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
Brought up 1 CPUs
Total of 1 processors activated (6132.70 BogoMIPS).
devtmpfs: initialized
Time: 17:37:44  Date: 08/09/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci 0000:00:00.0: [1002:5832] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xea000000-0xebffffff pref]
pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]
pci 0000:00:01.0: [1002:5838] type 1 class 0x000604
pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xe8001000-0xe8001fff]
pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xe8002000-0xe8002fff]
pci 0000:00:13.2: [1002:4345] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xe8003000-0xe8003fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
pci 0000:00:14.0: reg 10: [io  0x8060-0x806f]
pci 0000:00:14.0: reg 14: [mem 0xe8004000-0xe80043ff]
pci 0000:00:14.1: [1002:4349] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:14.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:14.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:14.1: reg 20: [io  0x8070-0x807f]
pci 0000:00:14.3: [1002:434c] type 0 class 0x000601
pci 0000:00:14.4: [1002:4342] type 1 class 0x000604
pci 0000:00:14.5: [1002:4341] type 0 class 0x000401
pci 0000:00:14.5: reg 10: [mem 0xe8004400-0xe80044ff]
pci 0000:00:14.6: [1002:434d] type 0 class 0x000703
pci 0000:00:14.6: reg 10: [mem 0xe8004800-0xe80048ff]
pci 0000:01:05.0: [1002:4e50] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
pci 0000:02:00.0: reg 10: [mem 0xe8214000-0xe82147ff]
pci 0000:02:00.0: reg 14: [mem 0xe8210000-0xe8213fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:02.0: [168c:0013] type 0 class 0x000200
pci 0000:02:02.0: reg 10: [mem 0xe8200000-0xe820ffff]
pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
pci 0000:02:03.0: reg 10: [io  0xa000-0xa0ff]
pci 0000:02:03.0: reg 14: [mem 0xe8214800-0xe82148ff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: [1524:1411] type 2 class 0x000607
pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:04.0: supports D1 D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:04.2: [1524:0550] type 0 class 0x000805
pci 0000:02:04.2: reg 10: [mem 0xe8215000-0xe82150ff]
pci 0000:02:04.2: supports D1 D2
pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:04.2: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000007ff70000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0080-0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [io  0x040b]
pnp 00:01: [io  0x04d6]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x00f0-0x00fe]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io  0x0070-0x0073]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x0060]
pnp 00:05: [io  0x0064]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [irq 12]
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:07: [io  0x002e-0x002f]
pnp 00:07: [io  0x004e-0x004f]
pnp 00:07: [io  0x0072-0x0073]
pnp 00:07: [io  0x1080]
pnp 00:07: [io  0x00b0-0x00b1]
pnp 00:07: [io  0x0092]
pnp 00:07: [io  0x0200-0x020f]
pnp 00:07: [io  0x0220-0x022f]
pnp 00:07: [io  0x040b]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x04d6]
pnp 00:07: [io  0x0530-0x0537]
pnp 00:07: [io  0x0c00-0x0c01]
pnp 00:07: [io  0x0c14]
pnp 00:07: [io  0x0c50-0x0c52]
pnp 00:07: [io  0x0c6c]
pnp 00:07: [io  0x0c6f]
pnp 00:07: [io  0x0cd6-0x0cd7]
pnp 00:07: [io  0x8000-0x805f]
pnp 00:07: [io  0x0f40-0x0f47]
pnp 00:07: [io  0x0280-0x0293]
system 00:07: [io  0x1080] has been reserved
system 00:07: [io  0x0200-0x020f] has been reserved
system 00:07: [io  0x0220-0x022f] has been reserved
system 00:07: [io  0x040b] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x04d6] has been reserved
system 00:07: [io  0x0530-0x0537] has been reserved
system 00:07: [io  0x0c00-0x0c01] has been reserved
system 00:07: [io  0x0c14] has been reserved
system 00:07: [io  0x0c50-0x0c52] has been reserved
system 00:07: [io  0x0c6c] has been reserved
system 00:07: [io  0x0c6f] has been reserved
system 00:07: [io  0x0cd6-0x0cd7] has been reserved
system 00:07: [io  0x8000-0x805f] has been reserved
system 00:07: [io  0x0f40-0x0f47] has been reserved
system 00:07: [io  0x0280-0x0293] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0x00000000-0x0009ffff]
pnp 00:08: [mem 0x000e0000-0x000fffff]
pnp 00:08: [mem 0x00100000-0x7fffffff]
pnp 00:08: [mem 0xfff80000-0xffffffff]
pnp 00:08: [mem 0xe8000000-0xe8000fff]
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
system 00:08: [mem 0xe8000000-0xe8000fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [io  0x06f8-0x06ff]
pnp 00:09: [irq 3]
pnp 00:09: [dma 3]
pnp 00:09: Plug and Play ACPI device, IDs SMCf010 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [irq 7]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
Switching to clocksource acpi_pm
pci 0000:00:14.4: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
pci 0000:02:04.0: BAR 15: assigned [mem 0x90000000-0x93ffffff pref]
pci 0000:02:04.0: BAR 16: assigned [mem 0x94000000-0x97ffffff]
pci 0000:02:04.0: BAR 0: assigned [mem 0xe8216000-0xe8216fff]
pci 0000:02:04.0: BAR 0: set to [mem 0xe8216000-0xe8216fff] (PCI address [0xe8216000-0xe8216fff])
pci 0000:02:04.0: BAR 13: assigned [io  0xa400-0xa4ff]
pci 0000:02:04.0: BAR 14: assigned [io  0xa800-0xa8ff]
pci 0000:02:04.0: CardBus bridge to [bus 03-03]
pci 0000:02:04.0:   bridge window [io  0xa400-0xa4ff]
pci 0000:02:04.0:   bridge window [io  0xa800-0xa8ff]
pci 0000:02:04.0:   bridge window [mem 0x90000000-0x93ffffff pref]
pci 0000:02:04.0:   bridge window [mem 0x94000000-0x97ffffff]
pci 0000:00:14.4: PCI bridge to [bus 02-04]
pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
pci 0000:00:14.4:   bridge window [mem 0xe8200000-0xe82fffff]
pci 0000:00:14.4:   bridge window [mem 0x90000000-0x93ffffff pref]
pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
pci_bus 0000:02: resource 2 [mem 0x90000000-0x93ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0xa400-0xa4ff]
pci_bus 0000:03: resource 1 [io  0xa800-0xa8ff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x93ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x94000000-0x97ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Switched to NOHz mode on CPU #0
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:05.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4208k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1312911464.907:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1571
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xf0000000, mapped to 0xf3c80000, using 1875k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:5615
vesafb: pmi: set display start = c00c5683, set palette = c00c56bd
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
isapnp: Scanning for PnP cards...
serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:14.6: PCI INT B disabled
Linux agpgart interface v0.103
agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset
reserve_ram_pages_type failed 0x30b9f000-0x30ba0000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30ba8000-0x30ba9000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30ba9000-0x30baa000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30baa000-0x30bab000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30bab000-0x30bac000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30bac000-0x30bad000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30bad000-0x30bae000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30bae000-0x30baf000, track 0x10, req 0x10
reserve_ram_pages_type failed 0x30baf000-0x30bb0000, track 0x10, req 0x10
agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xea000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=0e055502-67e2-4c7a-8c0c-2b8eda4e792b
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 7:73:643
rtc_cmos 00:03: setting system clock to 2011-08-09 17:37:45 UTC (1312911465)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 556k freed
Write protecting the kernel text: 3560k
Write protecting the kernel read-only data: 1636k
nash-hotplug (36): /proc/36/oom_adj is deprecated, please use /proc/36/oom_score_adj instead.
[drm] Initialized drm 1.1.0 20060810
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
Refined TSC clocksource calibration: 3066.774 MHz.
Switching to clocksource tsc
checking generic (f0000000 4000000) vs hw (f0000000 8000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:01:05.0: power state changed by ACPI to D0
radeon 0000:01:05.0: power state changed by ACPI to D0
radeon 0000:01:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV350 0x1002:0x4E50).
[drm] register mmio base: 0xE8100000
[drm] register mmio size: 65536
agpgart-ati 0000:00:00.0: AGP 3.0 bridge
agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:05.0: putting AGP V3 device into 8x mode
radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:05.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (64M used)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 402622 kiB.
[TTM] Zone highmem: Available graphics memory: 1031074 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 32M of GTT memory ready.
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
radeon 0000:01:05.0: WB disabled
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x00000000EA001000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: LGP                     
[drm] Panel Size 1280x800
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   LVDS
[drm]   Encoders:
[drm]     LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm]   S-video
[drm]   Encoders:
[drm]     TV1: INTERNAL_DAC2
[drm] fb mappable at 0xF0040000
[drm] vram apper at 0xF0000000
[drm] size 4096000
[drm] fb depth is 24
[drm]    pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8070 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8078 irq 15
ata2.00: ATAPI: MATSHITADVD-RAM UJ-820S, 1.00, max UDMA/33
ata2.00: configured for UDMA/33
ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-820S  1.00 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with ordered data mode
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[108]: starting version 166
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xe8003000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-4.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
NET: Registered protocol family 23
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-4.mga ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.8-desktop-4.mga ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
smsc_ircc_present: can't get sir_base of 0x2f8
ppdev: user-space parallel port driver
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: New USB device found, idVendor=192f, idProduct=0416
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
generic-usb 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
toshiba: not a supported Toshiba laptop
Non-volatile memory driver v1.3
EXT3-fs (sda2): using internal journal
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:04.2: SDHCI controller found [1524:0550] (rev 0)
sdhci-pci 0000:02:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:04.2] using PIO
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with ordered data mode
fuse init (API version 7.16)
p4-clockmod: Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
yenta_cardbus 0000:02:04.0: CardBus bridge found [1179:ff00]
yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:04.0: TI: mfunc 0x81411212, devctl 0x44
yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0850, PCI irq 16
yenta_cardbus 0000:02:04.0: Socket status: 30000006
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0xa000-0xafff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe821ffff
yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x93ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x93ffffff: excluding 0x90000000-0x93ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x220-0x22f 0x280-0x297 0x2f8-0x2ff 0x370-0x37f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xdbfff 0xe4000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Adding 2554296k swap on /dev/sda5.  Priority:-1 extents:1 across:2554296k

Actions: View

Attachments on bug 2366: 713