Attachment 6793 Details for Bug 16197 – dmesg

dmesg

dmesg (text/plain), 41.03 KB, created by Marja Van Waes on 2015-06-30 17:42:03 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Marja Van Waes

Created: 2015-06-30 17:42:03 CEST

Size: 41.03 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.19.8-desktop-3.mga5 (iurt@rabbit.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Jun 13 17:44:41 UTC 2015
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005dfeffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000005dff0000-0x000000005dff2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000005dff3000-0x000000005dffffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] SMBIOS 2.3 present.
>[    0.000000] DMI: LENOVO 8454D3G/GA-8S661FXM-775, BIOS 40KT27A 06/13/2007
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x5dff0 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C7FFF write-protect
>[    0.000000]   C8000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-through
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FC0000000 write-back
>[    0.000000]   1 base 040000000 mask FE0000000 write-back
>[    0.000000]   2 base 05E000000 mask FFE000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
>[    0.000000] found SMP MP-table at [mem 0x000f5560-0x000f556f] mapped at [c00f5560]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x32c00000-0x32ffffff]
>[    0.000000]  [mem 0x32c00000-0x32ffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0x32bfffff]
>[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x32bfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x33000000-0x333fdfff]
>[    0.000000]  [mem 0x33000000-0x333fdfff] page 4k
>[    0.000000] BRK [0x00bd3000, 0x00bd3fff] PGTABLE
>[    0.000000] BRK [0x00bd4000, 0x00bd5fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x36e30000-0x3770ffff]
>[    0.000000] Allocated new RAMDISK: [mem 0x32b1e000-0x333fd27f]
>[    0.000000] Move RAMDISK from [mem 0x36e30000-0x3770f27f] to [mem 0x32b1e000-0x333fd27f]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F6E50 000014 (v00 LENOVO)
>[    0.000000] ACPI: RSDT 0x000000005DFF3040 000034 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
>[    0.000000] ACPI: FACP 0x000000005DFF30C0 000074 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
>[    0.000000] ACPI: DSDT 0x000000005DFF3180 003666 (v01 LENOVO AWRDACPI 00001000 MSFT 0100000C)
>[    0.000000] ACPI: FACS 0x000000005DFF0000 000040
>[    0.000000] ACPI: APIC 0x000000005DFF6840 000068 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
>[    0.000000] ACPI: SSDT 0x000000005DFF68F0 00015C (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
>[    0.000000] ACPI: SSDT 0x000000005DFF6D80 000167 (v01 PmRef  CpuPm    00003000 INTL 20040311)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 683MB HIGHMEM available.
>[    0.000000] 819MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 333fe000
>[    0.000000]   low ram: 0 - 333fe000
>[    0.000000] BRK [0x00bd6000, 0x00bd6fff] PGTABLE
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x333fdfff]
>[    0.000000]   HighMem  [mem 0x333fe000-0x5dfeffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x5dfeffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x5dfeffff]
>[    0.000000] On node 0 totalpages: 384910
>[    0.000000] free_area_init_node: node 0, pgdat c0a73fc0, node_mem_map f1f5e020
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1608 pages used for memmap
>[    0.000000]   Normal zone: 205822 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 175090 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>[    0.000000] e820: [mem 0x5e000000-0xfebfffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 16 pages/cpu @f1f35000 s36288 r0 d29248 u65536
>[    0.000000] pcpu-alloc: s36288 r0 d29248 u65536 alloc=16*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 383270
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=bb65aa85-21f6-4f4d-b3a0-43891a1743ee ro splash quiet noiswmd resume=UUID=175df66c-8070-4987-8b72-8bc592fd5c81
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000333fe:0005dff0)
>[    0.000000] Initializing Movable for node 0 (00000000:00000000)
>[    0.000000] Memory: 1506392K/1539640K available (6288K kernel code, 625K rwdata, 2860K rodata, 744K init, 492K bss, 33248K reserved, 0K cma-reserved, 700360K highmem)
>[    0.000000] virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
>    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
>      .init : 0xc0a8f000 - 0xc0b49000   ( 744 kB)
>      .data : 0xc07245eb - 0xc0a8d540   (3491 kB)
>      .text : 0xc0100000 - 0xc07245eb   (6289 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.000000] NR_IRQS:4352 nr_irqs:440 16
>[    0.000000] CPU 0 irqstacks, hard=f1834000 soft=f1836000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 3000.872 MHz processor
>[    0.002019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.74 BogoMIPS (lpj=3000872)
>[    0.002026] pid_max: default: 32768 minimum: 301
>[    0.002038] ACPI: Core revision 20141107
>[    0.006928] ACPI: All ACPI Tables successfully acquired
>[    0.007050] Security Framework initialized
>[    0.007075] TOMOYO Linux initialized
>[    0.007102] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.007107] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.007522] Initializing cgroup subsys devices
>[    0.007530] Initializing cgroup subsys freezer
>[    0.007535] Initializing cgroup subsys net_cls
>[    0.007540] Initializing cgroup subsys blkio
>[    0.007579] CPU: Physical Processor ID: 0
>[    0.007582] CPU: Processor Core ID: 0
>[    0.007593] mce: CPU supports 4 MCE banks
>[    0.007609] CPU0: Thermal monitoring enabled (TM1)
>[    0.007616] process: using mwait in idle threads
>[    0.007631] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
>[    0.008431] Freeing SMP alternatives memory: 40K (c0b49000 - c0b53000)
>[    0.009816] ftrace: allocating 25527 entries in 50 pages
>[    0.019234] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.019566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.030031] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 04, stepping: 03)
>[    0.031000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>[    0.031000] ... version:                0
>[    0.031000] ... bit width:              40
>[    0.031000] ... generic registers:      18
>[    0.031000] ... value mask:             000000ffffffffff
>[    0.031000] ... max period:             0000007fffffffff
>[    0.031000] ... fixed-purpose events:   0
>[    0.031000] ... event mask:             000000000003ffff
>[    0.031312] CPU 1 irqstacks, hard=f192e000 soft=f1938000
>[    0.031316] x86: Booting SMP configuration:
>[    0.031319] .... node  #0, CPUs:      #1
>[    0.003000] Initializing CPU#1
>[    0.043055] x86: Booted up 1 node, 2 CPUs
>[    0.043063] smpboot: Total of 2 processors activated (12003.48 BogoMIPS)
>[    0.044243] devtmpfs: initialized
>[    0.045011] PM: Registering ACPI NVS region [mem 0x5dff0000-0x5dff2fff] (12288 bytes)
>[    0.045011] xor: measuring software checksum speed
>[    0.054230]    pIII_sse  :  4132.000 MB/sec
>[    0.064229]    prefetch64-sse:  4196.000 MB/sec
>[    0.064233] xor: using function: prefetch64-sse (4196.000 MB/sec)
>[    0.064243] pinctrl core: initialized pinctrl subsystem
>[    0.064460] RTC time: 12:54:28, date: 06/30/15
>[    0.064654] NET: Registered protocol family 16
>[    0.069011] cpuidle: using governor ladder
>[    0.075007] cpuidle: using governor menu
>[    0.075190] ACPI: bus type PCI registered
>[    0.075195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.099006] PCI: PCI BIOS revision 2.10 entry at 0xfb150, last bus=1
>[    0.099009] PCI: Using configuration type 1 for base access
>[    0.123009] raid6: mmxx1     1863 MB/s
>[    0.140023] raid6: mmxx2     2175 MB/s
>[    0.157033] raid6: sse1x1    1093 MB/s
>[    0.174031] raid6: sse1x2    2113 MB/s
>[    0.191015] raid6: sse2x1    2218 MB/s
>[    0.208016] raid6: sse2x2    3238 MB/s
>[    0.208019] raid6: using algorithm sse2x2 (3238 MB/s)
>[    0.208022] raid6: using intx1 recovery algorithm
>[    0.208263] ACPI: Added _OSI(Module Device)
>[    0.208267] ACPI: Added _OSI(Processor Device)
>[    0.208270] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.208273] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.213236] ACPI: Dynamic OEM Table Load:
>[    0.213246] ACPI: SSDT 0x00000000F19C10C0 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
>[    0.213712] ACPI: Interpreter enabled
>[    0.213728] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
>[    0.213736] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
>[    0.213760] ACPI: (supports S0 S3 S4 S5)
>[    0.213764] ACPI: Using IOAPIC for interrupt routing
>[    0.213812] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.220411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.220422] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>[    0.220432] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>[    0.220550] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
>[    0.220555] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
>[    0.220559] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
>[    0.220563] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
>[    0.220567] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.220570] acpi PNP0A03:00: host bridge window [mem 0x5e000000-0xfebfffff] (ignored)
>[    0.220575] PCI: root bus 00: using default resources
>[    0.220581] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    0.220795] PCI host bridge to bus 0000:00
>[    0.220802] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.220806] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.220810] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>[    0.220833] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000
>[    0.220848] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xebffffff]
>[    0.221070] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
>[    0.221238] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
>[    0.221461] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
>[    0.221482] pci 0000:00:02.5: reg 0x10: [io  0x0000-0x0007]
>[    0.221496] pci 0000:00:02.5: reg 0x14: [io  0x0000-0x0003]
>[    0.221509] pci 0000:00:02.5: reg 0x18: [io  0x0000-0x0007]
>[    0.221521] pci 0000:00:02.5: reg 0x1c: [io  0x0000-0x0003]
>[    0.221534] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
>[    0.221559] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    0.221563] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    0.221566] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    0.221569] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    0.221718] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
>[    0.221741] pci 0000:00:02.7: reg 0x10: [io  0xa000-0xa0ff]
>[    0.221755] pci 0000:00:02.7: reg 0x14: [io  0xa400-0xa47f]
>[    0.221843] pci 0000:00:02.7: supports D1 D2
>[    0.221847] pci 0000:00:02.7: PME# supported from D3hot D3cold
>[    0.222012] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
>[    0.222031] pci 0000:00:03.0: reg 0x10: [mem 0xec100000-0xec100fff]
>[    0.222169] pci 0000:00:03.0: System wakeup disabled by ACPI
>[    0.222260] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
>[    0.222279] pci 0000:00:03.1: reg 0x10: [mem 0xec101000-0xec101fff]
>[    0.222415] pci 0000:00:03.1: System wakeup disabled by ACPI
>[    0.222501] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
>[    0.222520] pci 0000:00:03.2: reg 0x10: [mem 0xec102000-0xec102fff]
>[    0.222656] pci 0000:00:03.2: System wakeup disabled by ACPI
>[    0.222750] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
>[    0.222774] pci 0000:00:03.3: reg 0x10: [mem 0xec103000-0xec103fff]
>[    0.222868] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
>[    0.222942] pci 0000:00:03.3: System wakeup disabled by ACPI
>[    0.223052] pci 0000:00:05.0: [1039:0180] type 00 class 0x010185
>[    0.223075] pci 0000:00:05.0: reg 0x10: [io  0xa800-0xa807]
>[    0.223089] pci 0000:00:05.0: reg 0x14: [io  0xac00-0xac03]
>[    0.223101] pci 0000:00:05.0: reg 0x18: [io  0xb000-0xb007]
>[    0.223114] pci 0000:00:05.0: reg 0x1c: [io  0xb400-0xb403]
>[    0.223127] pci 0000:00:05.0: reg 0x20: [io  0xb800-0xb80f]
>[    0.223140] pci 0000:00:05.0: reg 0x24: [io  0xbc00-0xbc7f]
>[    0.223190] pci 0000:00:05.0: PME# supported from D3cold
>[    0.223366] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
>[    0.223389] pci 0000:00:0f.0: reg 0x10: [io  0xc000-0xc0ff]
>[    0.223403] pci 0000:00:0f.0: reg 0x14: [mem 0xec104000-0xec1040ff]
>[    0.223492] pci 0000:00:0f.0: supports D1 D2
>[    0.223496] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
>[    0.223726] pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
>[    0.223747] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
>[    0.223759] pci 0000:01:00.0: reg 0x14: [mem 0xec000000-0xec01ffff]
>[    0.223770] pci 0000:01:00.0: reg 0x18: [io  0x9000-0x907f]
>[    0.223840] pci 0000:01:00.0: supports D1 D2
>[    0.223950] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.223957] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>[    0.223964] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xec0fffff]
>[    0.223970] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
>[    0.223981] pci_bus 0000:00: on NUMA node 0
>[    0.224134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>[    0.224253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>[    0.224366] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>[    0.224481] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[    0.224595] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>[    0.224710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
>[    0.224829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>[    0.224942] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>[    0.225656] ACPI: Enabled 3 GPEs in block 00 to 0F
>[    0.225770] vgaarb: setting as boot device: PCI:0000:01:00.0
>[    0.225770] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.225770] vgaarb: loaded
>[    0.225770] vgaarb: bridge control possible 0000:01:00.0
>[    0.225770] sta2x11_scr_init
>[    0.225770] sta2x11_apb_soc_regs_init
>[    0.225770] sta2x11_sctl_init
>[    0.225770] sta2x11_apbreg_init
>[    0.226503] SCSI subsystem initialized
>[    0.226592] libata version 3.00 loaded.
>[    0.226846] PCI: Using ACPI for IRQ routing
>[    0.226852] PCI: pci_cache_line_size set to 64 bytes
>[    0.226900] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>[    0.226904] e820: reserve RAM buffer [mem 0x5dff0000-0x5fffffff]
>[    0.227155] NetLabel: Initializing
>[    0.227158] NetLabel:  domain hash size = 128
>[    0.227160] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.227184] NetLabel:  unlabeled traffic allowed by default
>[    0.227311] Switched to clocksource refined-jiffies
>[    0.245064] pnp: PnP ACPI init
>[    0.245631] system 00:00: [io  0x04d0-0x04d1] has been reserved
>[    0.245636] system 00:00: [io  0x0290-0x029f] has been reserved
>[    0.245641] system 00:00: [io  0x0800-0x0805] has been reserved
>[    0.245644] system 00:00: [io  0x0880-0x088f] has been reserved
>[    0.245652] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.245746] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.246198] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.246655] pnp 00:03: [dma 3]
>[    0.246738] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
>[    0.246857] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.246942] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.247222] system 00:06: [mem 0x000d1000-0x000d3fff] has been reserved
>[    0.247229] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
>[    0.247233] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
>[    0.247237] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
>[    0.247241] system 00:06: [mem 0x5dff0000-0x5dffffff] could not be reserved
>[    0.247246] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
>[    0.247250] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.247254] system 00:06: [mem 0x00100000-0x5dfeffff] could not be reserved
>[    0.247258] system 00:06: [mem 0xffee0000-0xffefffff] has been reserved
>[    0.247262] system 00:06: [mem 0xfffe0000-0xfffeffff] has been reserved
>[    0.247266] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.247270] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.247276] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.247292] pnp: PnP ACPI: found 7 devices
>[    0.247298] PnPBIOS: Disabled
>[    0.286040] Switched to clocksource acpi_pm
>[    0.286071] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.286078] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
>[    0.286087] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xec0fffff]
>[    0.286094] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
>[    0.286104] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.286108] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    0.286112] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
>[    0.286115] pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
>[    0.286119] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
>[    0.286168] NET: Registered protocol family 2
>[    0.286573] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>[    0.286620] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.286701] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.286801] TCP: reno registered
>[    0.286809] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.286838] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.286930] NET: Registered protocol family 1
>[    0.510480] pci 0000:01:00.0: Video device with shadowed ROM
>[    0.510486] PCI: CLS 32 bytes, default 64
>[    0.510597] Trying to unpack rootfs image as initramfs...
>[    0.733063] Freeing initrd memory: 9088K (f2b1e000 - f33fe000)
>[    0.733112] sta2x11_mfd_init
>[    0.733515] apm: BIOS not found.
>[    0.734253] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.734341] audit: initializing netlink subsys (disabled)
>[    0.734391] audit: type=2000 audit(1435668868.733:1): initialized
>[    0.734970] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.739132] zpool: loaded
>[    0.739137] zbud: loaded
>[    0.739281] VFS: Disk quotas dquot_6.5.2
>[    0.739379] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.740823] bounce: pool size: 64 pages
>[    0.740906] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.740981] io scheduler noop registered
>[    0.740986] io scheduler deadline registered
>[    0.741086] io scheduler cfq registered (default)
>[    0.741374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.741411] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.741563] GHES: HEST is not enabled!
>[    0.741693] isapnp: Scanning for PnP cards...
>[    0.742073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.762641] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.763486] Linux agpgart interface v0.103
>[    0.763727] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
>[    0.769186] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
>[    0.772841] brd: module loaded
>[    0.773469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.773896] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.773907] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.774193] mousedev: PS/2 mouse device common for all mice
>[    0.775181] rtc_cmos 00:01: RTC can wake from S4
>[    0.775367] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    0.775399] rtc_cmos 00:01: alarms up to one year, 242 bytes nvram
>[    0.775462] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.775700] TCP: cubic registered
>[    0.775723] Key type dns_resolver registered
>[    0.776098] Using IPI No-Shortcut mode
>[    0.776373] registered taskstats version 1
>[    0.778369] Btrfs loaded
>[    0.778768]   Magic number: 3:418:937
>[    0.778867] rtc_cmos 00:01: setting system clock to 2015-06-30 12:54:28 UTC (1435668868)
>[    0.778941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    0.778944] EDD information not available.
>[    0.779078] PM: Checking hibernation image partition UUID=175df66c-8070-4987-8b72-8bc592fd5c81
>[    0.843416] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.099204] isapnp: No Plug & Play device found
>[    1.375967] psmouse serio1: hgpk: ID: 10 00 64
>[    1.735024] tsc: Refined TSC clocksource calibration: 3000.851 MHz
>[    2.218779] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>[    2.223562] PM: Hibernation image not present or could not be loaded.
>[    2.224397] Freeing unused kernel memory: 744K (c0a8f000 - c0b49000)
>[    2.224600] Write protecting the kernel text: 6292k
>[    2.224687] Write protecting the kernel read-only data: 2864k
>[    2.316687] dracut: dracut-038
>[    2.345506] pata_sis 0000:00:02.5: version 0.5.2
>[    2.345809] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
>[    2.347217] scsi host0: pata_sis
>[    2.347434] scsi host1: pata_sis
>[    2.347530] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>[    2.347535] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>[    2.517269] ata1.00: ATAPI: TSSTcorp CDW/DVD TS-H492C, IB01, max UDMA/33
>[    2.539268] ata1.00: configured for UDMA/33
>[    2.540163] scsi 0:0:0:0: CD-ROM            TSSTcorp CDW/DVD TS-H492C IB01 PQ: 0 ANSI: 5
>[    2.706105] sata_sis 0000:00:05.0: version 1.0
>[    2.706337] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
>[    2.707362] scsi host2: sata_sis
>[    2.707564] scsi host3: sata_sis
>[    2.707666] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb800 irq 17
>[    2.707671] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xb808 irq 17
>[    2.735104] Switched to clocksource tsc
>[    3.012048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    3.015359] ata3.00: ATA-6: ST380819AS                   40Y9045LEN, 3.04, max UDMA/133
>[    3.015364] ata3.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    3.021351] ata3.00: configured for UDMA/133
>[    3.021549] scsi 2:0:0:0: Direct-Access     ATA      ST380819AS       3.04 PQ: 0 ANSI: 5
>[    3.021941] sd 2:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    3.022143] sd 2:0:0:0: [sda] Write Protect is off
>[    3.022149] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.022209] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.081619]  sda: sda1 sda3 < sda5 sda6 sda7 sda8 >
>[    3.082568] sd 2:0:0:0: [sda] Attached SCSI disk
>[    3.337833] ata4: SATA link down (SStatus 0 SControl 300)
>[    3.363131] Uniform Multi-Platform E-IDE driver
>[    3.534582] random: systemd-udevd urandom read with 22 bits of entropy available
>[    3.634059] dracut: Starting plymouth daemon
>[    3.837794] sr 0:0:0:0: [sr0] scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
>[    3.837805] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    3.838201] sr 0:0:0:0: Attached scsi CD-ROM sr0
>[    3.924683] ACPI: bus type USB registered
>[    3.924775] usbcore: registered new interface driver usbfs
>[    3.924816] usbcore: registered new interface driver hub
>[    3.924892] usbcore: registered new device driver usb
>[    3.955668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    4.000467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    4.000475] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>[    4.002192] ehci-pci: EHCI PCI platform driver
>[    4.006641] ehci-pci 0000:00:03.3: EHCI Host Controller
>[    4.006674] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
>[    4.006773] ehci-pci 0000:00:03.3: irq 23, io mem 0xec103000
>[    4.012037] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
>[    4.012195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    4.012203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.012209] usb usb1: Product: EHCI Host Controller
>[    4.012216] usb usb1: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd
>[    4.012221] usb usb1: SerialNumber: 0000:00:03.3
>[    4.012649] hub 1-0:1.0: USB hub found
>[    4.012673] hub 1-0:1.0: 8 ports detected
>[    4.014932] ohci-pci: OHCI PCI platform driver
>[    4.015301] ohci-pci 0000:00:03.0: OHCI PCI host controller
>[    4.015321] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
>[    4.015400] ohci-pci 0000:00:03.0: irq 20, io mem 0xec100000
>[    4.068150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    4.068157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.068161] usb usb2: Product: OHCI PCI host controller
>[    4.068165] usb usb2: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
>[    4.068168] usb usb2: SerialNumber: 0000:00:03.0
>[    4.068507] hub 2-0:1.0: USB hub found
>[    4.068531] hub 2-0:1.0: 3 ports detected
>[    4.069074] ohci-pci 0000:00:03.1: OHCI PCI host controller
>[    4.069088] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
>[    4.069139] ohci-pci 0000:00:03.1: irq 21, io mem 0xec101000
>[    4.122137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    4.122144] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.122148] usb usb3: Product: OHCI PCI host controller
>[    4.122152] usb usb3: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
>[    4.122155] usb usb3: SerialNumber: 0000:00:03.1
>[    4.122480] hub 3-0:1.0: USB hub found
>[    4.122505] hub 3-0:1.0: 3 ports detected
>[    4.123131] ohci-pci 0000:00:03.2: OHCI PCI host controller
>[    4.123157] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
>[    4.123236] ohci-pci 0000:00:03.2: irq 22, io mem 0xec102000
>[    4.176144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    4.176150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.176154] usb usb4: Product: OHCI PCI host controller
>[    4.176157] usb usb4: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
>[    4.176161] usb usb4: SerialNumber: 0000:00:03.2
>[    4.176501] hub 4-0:1.0: USB hub found
>[    4.176527] hub 4-0:1.0: 2 ports detected
>[    4.203202] random: nonblocking pool is initialized
>[    4.315076] usb 1-5: new high-speed USB device number 2 using ehci-pci
>[    4.430171] usb 1-5: New USB device found, idVendor=1058, idProduct=0820
>[    4.430178] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
>[    4.430183] usb 1-5: Product: My Passport 0820
>[    4.430187] usb 1-5: Manufacturer: Western Digital
>[    4.430190] usb 1-5: SerialNumber: 57584D3145313454504D5538
>[    4.439456] usb-storage 1-5:1.0: USB Mass Storage device detected
>[    4.439819] scsi host4: usb-storage 1-5:1.0
>[    4.440056] usbcore: registered new interface driver usb-storage
>[    4.442714] usbcore: registered new interface driver uas
>[    4.532037] usb 1-7: new high-speed USB device number 3 using ehci-pci
>[    4.665537] usb 1-7: New USB device found, idVendor=148f, idProduct=5370
>[    4.665543] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.665547] usb 1-7: Product: 802.11 n WLAN
>[    4.665551] usb 1-7: Manufacturer: Ralink
>[    4.665555] usb 1-7: SerialNumber: 1.0
>[    4.829993] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[    4.830000] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[    4.830033] PM: Basic memory bitmaps created
>[    4.830658] PM: Basic memory bitmaps freed
>[    4.836973] PM: Starting manual resume from disk
>[    4.836983] PM: Hibernation image partition 8:6 present
>[    4.836986] PM: Looking for hibernation image.
>[    4.844689] PM: Image not found (code -22)
>[    4.844695] PM: Hibernation image not present or could not be loaded.
>[    4.951066] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    5.083505] dracut: Checking ext4: /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee
>[    5.083859] dracut: issuing e2fsck -a  /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee
>[    5.135225] dracut: /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee: clean, 240312/1916928 files, 2290644/7654716 blocks
>[    5.138296] dracut: Mounting /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee with -o relatime,acl,ro
>[    5.193159] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
>[    5.409033] dracut: Mounted root filesystem /dev/sda1
>[    5.441807] scsi 4:0:0:0: Direct-Access     WD       My Passport 0820 1012 PQ: 0 ANSI: 6
>[    5.444088] scsi 4:0:0:1: Enclosure         WD       SES Device       1012 PQ: 0 ANSI: 6
>[    5.444418] sd 4:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    5.446407] sd 4:0:0:0: [sdb] Write Protect is off
>[    5.446415] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08
>[    5.448406] sd 4:0:0:0: [sdb] No Caching mode page found
>[    5.448413] sd 4:0:0:0: [sdb] Assuming drive cache: write through
>[    5.711712] dracut: Switching root
>[    5.760319] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>[    6.419599] NET: Registered protocol family 10
>[    7.572487] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
>[    8.388033] RPC: Registered named UNIX socket transport module.
>[    8.388040] RPC: Registered udp transport module.
>[    8.388042] RPC: Registered tcp transport module.
>[    8.388045] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    8.722972] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>[    8.828276] EXT4-fs (sda1): re-mounted. Opts: acl
>[    8.935954] systemd-journald[454]: Received request to flush runtime journal from PID 1
>[    9.268638]  sdb: sdb1
>[    9.271835] sd 4:0:0:0: [sdb] Attached SCSI disk
>[   14.083671] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[   14.083800] ACPI: Power Button [PWRB]
>[   14.083979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[   14.084096] ACPI: Power Button [PWRF]
>[   14.362405] IT8705 SuperIO detected.
>[   14.362725] parport_pc 00:03: reported by Plug and Play ACPI
>[   14.362806] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>[   15.074497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   15.221138] sis630_smbus 0000:00:02.0: SIS630 compatible bus not detected, module not inserted.
>[   15.457288] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>[   15.457301] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
>[   15.463140] 8139too: 8139too Fast Ethernet driver 0.9.28
>[   15.464297] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xf3c26000, 00:14:85:77:a6:20, IRQ 17
>[   15.547785] sisfb: Video ROM found
>[   15.547906] sisfb: Video RAM at 0xe0000000, mapped to 0xf4080000, size 32768k
>[   15.547910] sisfb: MMIO at 0xec000000, mapped to 0xf3c40000, size 128k
>[   15.547913] sisfb: Memory heap starting at 32160K, size 32K
>[   15.635252] sisfb: CRT1 DDC supported
>[   15.635259] sisfb: CRT1 DDC level: 2 
>[   15.773370] ppdev: user-space parallel port driver
>[   15.805756] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
>[   15.827899] sisfb: Monitor range H 30-83KHz, V 55-76Hz, Max. dotclock 170MHz
>[   15.827911] sisfb: Default mode is 800x600x8 (60Hz)
>[   15.827920] sisfb: Initial vbflags 0x0
>[   15.830076] fbcon:  (fb0) is primary device
>[   15.847683] Console: switching to colour frame buffer device 100x37
>[   15.849571] sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
>[   15.849574] fb0: SiS 661 frame buffer device version 1.8.9
>[   15.849575] sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
>[   15.886277] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
>[   15.886463] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   16.194440] ses 4:0:0:1: Attached Enclosure device
>[   16.342072] 8139too 0000:00:0f.0 enp0s15: renamed from eth0
>[   16.535051] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 50814 usecs (2445 samples)
>[   16.535059] snd_intel8x0 0000:00:02.7: clocking to 48000
>[   16.731166] fuse init (API version 7.23)
>[   17.660306] Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k FS
>[   17.742825] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
>[   17.935669] cfg80211: Calling CRDA to update world regulatory domain
>[   18.024066] cfg80211: World regulatory domain updated:
>[   18.024075] cfg80211:  DFS Master region: unset
>[   18.024078] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[   18.024084] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[   18.024088] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[   18.024091] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
>[   18.024095] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[   18.024099] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[   18.024103] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
>[   18.024106] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
>[   18.024109] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
>[   18.168055] usb 1-7: reset high-speed USB device number 3 using ehci-pci
>[   18.295022] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
>[   18.323262] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
>[   18.361305] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   18.362142] usbcore: registered new interface driver rt2800usb
>[   18.369937] rt2800usb 1-7:1.0 wlp0s3f3u7: renamed from wlan0
>[   18.405479] cfg80211: Calling CRDA for country: NL
>[   18.411441] cfg80211: Regulatory domain changed to country: NL
>[   18.411453] cfg80211:  DFS Master region: ETSI
>[   18.411457] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[   18.411463] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[   18.411470] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[   18.411477] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[   18.411482] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
>[   18.411488] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[   25.275759] sd_festival[762]: segfault at 68 ip b75a71c9 sp bfc97220 error 4 in libpthread-2.20.so[b759b000+17000]
>[   28.634888] 8139too 0000:00:0f.0 enp0s15: link down
>[   28.635076] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
>[   28.741468] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
>[   28.906150] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
>[   29.103723] IPv6: ADDRCONF(NETDEV_UP): wlp0s3f3u7: link is not ready
>[   29.390142] IPv6: ADDRCONF(NETDEV_UP): wlp0s3f3u7: link is not ready
>[   29.826284] NET: Registered protocol family 17
>[   30.387921] wlp0s3f3u7: authenticate with 9c:c7:a6:0b:60:15
>[   30.420414] wlp0s3f3u7: send auth to 9c:c7:a6:0b:60:15 (try 1/3)
>[   30.423061] wlp0s3f3u7: authenticated
>[   30.424040] wlp0s3f3u7: associate with 9c:c7:a6:0b:60:15 (try 1/3)
>[   30.430059] wlp0s3f3u7: RX AssocResp from 9c:c7:a6:0b:60:15 (capab=0x431 status=0 aid=3)
>[   30.436908] wlp0s3f3u7: associated
>[   30.436978] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s3f3u7: link becomes ready
>[   30.437144] cfg80211: Calling CRDA for country: DE
>[   30.603737] cfg80211: Regulatory domain changed to country: DE
>[   30.603747] cfg80211:  DFS Master region: ETSI
>[   30.603751] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
>[   30.603758] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
>[   30.603766] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
>[   30.603773] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
>[   30.603779] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
>[   30.603785] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
>[   43.437689] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   43.545934] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   47.077989] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   47.336628] Netfilter messages via NETLINK v0.30.
>[   47.348271] ctnetlink v0.93: registering with nfnetlink.
>[   48.293324] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[   48.981503] xt_CT: No such helper "irc"
>[   48.998411] xt_CT: No such helper "irc-0"
>[   49.044911] xt_CT: No such helper "snmp"
>[   49.057461] xt_CT: No such helper "pptp"
>[   49.078193] xt_CT: No such helper "netbios-ns"
>[   49.315438] xt_addrtype: ipv6 does not support BROADCAST matching
>[   49.516609] ip_set: protocol 6
>[   49.707485] netfilter PSD loaded - (c) astaro AG
>[   49.718431] IFWLOG: register target

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.8-desktop-3.mga5 (iurt@rabbit.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Jun 13 17:44:41 UTC 2015
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005dfeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005dff0000-0x000000005dff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005dff3000-0x000000005dffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: LENOVO 8454D3G/GA-8S661FXM-775, BIOS 40KT27A 06/13/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x5dff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 05E000000 mask FFE000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f5560-0x000f556f] mapped at [c00f5560]
[    0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x32c00000-0x32ffffff]
[    0.000000]  [mem 0x32c00000-0x32ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x32bfffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x32bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x33000000-0x333fdfff]
[    0.000000]  [mem 0x33000000-0x333fdfff] page 4k
[    0.000000] BRK [0x00bd3000, 0x00bd3fff] PGTABLE
[    0.000000] BRK [0x00bd4000, 0x00bd5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36e30000-0x3770ffff]
[    0.000000] Allocated new RAMDISK: [mem 0x32b1e000-0x333fd27f]
[    0.000000] Move RAMDISK from [mem 0x36e30000-0x3770f27f] to [mem 0x32b1e000-0x333fd27f]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6E50 000014 (v00 LENOVO)
[    0.000000] ACPI: RSDT 0x000000005DFF3040 000034 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 0x000000005DFF30C0 000074 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 0x000000005DFF3180 003666 (v01 LENOVO AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x000000005DFF0000 000040
[    0.000000] ACPI: APIC 0x000000005DFF6840 000068 (v01 LENOVO AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: SSDT 0x000000005DFF68F0 00015C (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.000000] ACPI: SSDT 0x000000005DFF6D80 000167 (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 683MB HIGHMEM available.
[    0.000000] 819MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 333fe000
[    0.000000]   low ram: 0 - 333fe000
[    0.000000] BRK [0x00bd6000, 0x00bd6fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x333fdfff]
[    0.000000]   HighMem  [mem 0x333fe000-0x5dfeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x5dfeffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x5dfeffff]
[    0.000000] On node 0 totalpages: 384910
[    0.000000] free_area_init_node: node 0, pgdat c0a73fc0, node_mem_map f1f5e020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1608 pages used for memmap
[    0.000000]   Normal zone: 205822 pages, LIFO batch:31
[    0.000000]   HighMem zone: 175090 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x5e000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 16 pages/cpu @f1f35000 s36288 r0 d29248 u65536
[    0.000000] pcpu-alloc: s36288 r0 d29248 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 383270
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=bb65aa85-21f6-4f4d-b3a0-43891a1743ee ro splash quiet noiswmd resume=UUID=175df66c-8070-4987-8b72-8bc592fd5c81
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000333fe:0005dff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1506392K/1539640K available (6288K kernel code, 625K rwdata, 2860K rodata, 744K init, 492K bss, 33248K reserved, 0K cma-reserved, 700360K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
      .init : 0xc0a8f000 - 0xc0b49000   ( 744 kB)
      .data : 0xc07245eb - 0xc0a8d540   (3491 kB)
      .text : 0xc0100000 - 0xc07245eb   (6289 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f1834000 soft=f1836000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3000.872 MHz processor
[    0.002019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6001.74 BogoMIPS (lpj=3000872)
[    0.002026] pid_max: default: 32768 minimum: 301
[    0.002038] ACPI: Core revision 20141107
[    0.006928] ACPI: All ACPI Tables successfully acquired
[    0.007050] Security Framework initialized
[    0.007075] TOMOYO Linux initialized
[    0.007102] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007107] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007522] Initializing cgroup subsys devices
[    0.007530] Initializing cgroup subsys freezer
[    0.007535] Initializing cgroup subsys net_cls
[    0.007540] Initializing cgroup subsys blkio
[    0.007579] CPU: Physical Processor ID: 0
[    0.007582] CPU: Processor Core ID: 0
[    0.007593] mce: CPU supports 4 MCE banks
[    0.007609] CPU0: Thermal monitoring enabled (TM1)
[    0.007616] process: using mwait in idle threads
[    0.007631] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.008431] Freeing SMP alternatives memory: 40K (c0b49000 - c0b53000)
[    0.009816] ftrace: allocating 25527 entries in 50 pages
[    0.019234] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.019566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030031] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (fam: 0f, model: 04, stepping: 03)
[    0.031000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.031000] ... version:                0
[    0.031000] ... bit width:              40
[    0.031000] ... generic registers:      18
[    0.031000] ... value mask:             000000ffffffffff
[    0.031000] ... max period:             0000007fffffffff
[    0.031000] ... fixed-purpose events:   0
[    0.031000] ... event mask:             000000000003ffff
[    0.031312] CPU 1 irqstacks, hard=f192e000 soft=f1938000
[    0.031316] x86: Booting SMP configuration:
[    0.031319] .... node  #0, CPUs:      #1
[    0.003000] Initializing CPU#1
[    0.043055] x86: Booted up 1 node, 2 CPUs
[    0.043063] smpboot: Total of 2 processors activated (12003.48 BogoMIPS)
[    0.044243] devtmpfs: initialized
[    0.045011] PM: Registering ACPI NVS region [mem 0x5dff0000-0x5dff2fff] (12288 bytes)
[    0.045011] xor: measuring software checksum speed
[    0.054230]    pIII_sse  :  4132.000 MB/sec
[    0.064229]    prefetch64-sse:  4196.000 MB/sec
[    0.064233] xor: using function: prefetch64-sse (4196.000 MB/sec)
[    0.064243] pinctrl core: initialized pinctrl subsystem
[    0.064460] RTC time: 12:54:28, date: 06/30/15
[    0.064654] NET: Registered protocol family 16
[    0.069011] cpuidle: using governor ladder
[    0.075007] cpuidle: using governor menu
[    0.075190] ACPI: bus type PCI registered
[    0.075195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.099006] PCI: PCI BIOS revision 2.10 entry at 0xfb150, last bus=1
[    0.099009] PCI: Using configuration type 1 for base access
[    0.123009] raid6: mmxx1     1863 MB/s
[    0.140023] raid6: mmxx2     2175 MB/s
[    0.157033] raid6: sse1x1    1093 MB/s
[    0.174031] raid6: sse1x2    2113 MB/s
[    0.191015] raid6: sse2x1    2218 MB/s
[    0.208016] raid6: sse2x2    3238 MB/s
[    0.208019] raid6: using algorithm sse2x2 (3238 MB/s)
[    0.208022] raid6: using intx1 recovery algorithm
[    0.208263] ACPI: Added _OSI(Module Device)
[    0.208267] ACPI: Added _OSI(Processor Device)
[    0.208270] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.208273] ACPI: Added _OSI(Processor Aggregator Device)
[    0.213236] ACPI: Dynamic OEM Table Load:
[    0.213246] ACPI: SSDT 0x00000000F19C10C0 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.213712] ACPI: Interpreter enabled
[    0.213728] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.213736] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.213760] ACPI: (supports S0 S3 S4 S5)
[    0.213764] ACPI: Using IOAPIC for interrupt routing
[    0.213812] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.220411] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.220422] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.220432] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.220550] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
[    0.220555] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
[    0.220559] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
[    0.220563] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
[    0.220567] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.220570] acpi PNP0A03:00: host bridge window [mem 0x5e000000-0xfebfffff] (ignored)
[    0.220575] PCI: root bus 00: using default resources
[    0.220581] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.220795] PCI host bridge to bus 0000:00
[    0.220802] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.220806] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.220810] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.220833] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000
[    0.220848] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xebffffff]
[    0.221070] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[    0.221238] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100
[    0.221461] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a
[    0.221482] pci 0000:00:02.5: reg 0x10: [io  0x0000-0x0007]
[    0.221496] pci 0000:00:02.5: reg 0x14: [io  0x0000-0x0003]
[    0.221509] pci 0000:00:02.5: reg 0x18: [io  0x0000-0x0007]
[    0.221521] pci 0000:00:02.5: reg 0x1c: [io  0x0000-0x0003]
[    0.221534] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
[    0.221559] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.221563] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.221566] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.221569] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.221718] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.221741] pci 0000:00:02.7: reg 0x10: [io  0xa000-0xa0ff]
[    0.221755] pci 0000:00:02.7: reg 0x14: [io  0xa400-0xa47f]
[    0.221843] pci 0000:00:02.7: supports D1 D2
[    0.221847] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.222012] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.222031] pci 0000:00:03.0: reg 0x10: [mem 0xec100000-0xec100fff]
[    0.222169] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.222260] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.222279] pci 0000:00:03.1: reg 0x10: [mem 0xec101000-0xec101fff]
[    0.222415] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.222501] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[    0.222520] pci 0000:00:03.2: reg 0x10: [mem 0xec102000-0xec102fff]
[    0.222656] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.222750] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.222774] pci 0000:00:03.3: reg 0x10: [mem 0xec103000-0xec103fff]
[    0.222868] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.222942] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.223052] pci 0000:00:05.0: [1039:0180] type 00 class 0x010185
[    0.223075] pci 0000:00:05.0: reg 0x10: [io  0xa800-0xa807]
[    0.223089] pci 0000:00:05.0: reg 0x14: [io  0xac00-0xac03]
[    0.223101] pci 0000:00:05.0: reg 0x18: [io  0xb000-0xb007]
[    0.223114] pci 0000:00:05.0: reg 0x1c: [io  0xb400-0xb403]
[    0.223127] pci 0000:00:05.0: reg 0x20: [io  0xb800-0xb80f]
[    0.223140] pci 0000:00:05.0: reg 0x24: [io  0xbc00-0xbc7f]
[    0.223190] pci 0000:00:05.0: PME# supported from D3cold
[    0.223366] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[    0.223389] pci 0000:00:0f.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.223403] pci 0000:00:0f.0: reg 0x14: [mem 0xec104000-0xec1040ff]
[    0.223492] pci 0000:00:0f.0: supports D1 D2
[    0.223496] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[    0.223726] pci 0000:01:00.0: [1039:6330] type 00 class 0x030000
[    0.223747] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[    0.223759] pci 0000:01:00.0: reg 0x14: [mem 0xec000000-0xec01ffff]
[    0.223770] pci 0000:01:00.0: reg 0x18: [io  0x9000-0x907f]
[    0.223840] pci 0000:01:00.0: supports D1 D2
[    0.223950] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.223957] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.223964] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xec0fffff]
[    0.223970] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.223981] pci_bus 0000:00: on NUMA node 0
[    0.224134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.224253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.224366] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.224481] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.224595] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.224710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.224829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.224942] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.225656] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.225770] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.225770] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.225770] vgaarb: loaded
[    0.225770] vgaarb: bridge control possible 0000:01:00.0
[    0.225770] sta2x11_scr_init
[    0.225770] sta2x11_apb_soc_regs_init
[    0.225770] sta2x11_sctl_init
[    0.225770] sta2x11_apbreg_init
[    0.226503] SCSI subsystem initialized
[    0.226592] libata version 3.00 loaded.
[    0.226846] PCI: Using ACPI for IRQ routing
[    0.226852] PCI: pci_cache_line_size set to 64 bytes
[    0.226900] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.226904] e820: reserve RAM buffer [mem 0x5dff0000-0x5fffffff]
[    0.227155] NetLabel: Initializing
[    0.227158] NetLabel:  domain hash size = 128
[    0.227160] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.227184] NetLabel:  unlabeled traffic allowed by default
[    0.227311] Switched to clocksource refined-jiffies
[    0.245064] pnp: PnP ACPI init
[    0.245631] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.245636] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.245641] system 00:00: [io  0x0800-0x0805] has been reserved
[    0.245644] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.245652] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.245746] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246198] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.246655] pnp 00:03: [dma 3]
[    0.246738] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.246857] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.246942] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.247222] system 00:06: [mem 0x000d1000-0x000d3fff] has been reserved
[    0.247229] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.247233] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.247237] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.247241] system 00:06: [mem 0x5dff0000-0x5dffffff] could not be reserved
[    0.247246] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.247250] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.247254] system 00:06: [mem 0x00100000-0x5dfeffff] could not be reserved
[    0.247258] system 00:06: [mem 0xffee0000-0xffefffff] has been reserved
[    0.247262] system 00:06: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.247266] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.247270] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.247276] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.247292] pnp: PnP ACPI: found 7 devices
[    0.247298] PnPBIOS: Disabled
[    0.286040] Switched to clocksource acpi_pm
[    0.286071] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.286078] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.286087] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xec0fffff]
[    0.286094] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.286104] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.286108] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.286112] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.286115] pci_bus 0000:01: resource 1 [mem 0xec000000-0xec0fffff]
[    0.286119] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[    0.286168] NET: Registered protocol family 2
[    0.286573] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.286620] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.286701] TCP: Hash tables configured (established 8192 bind 8192)
[    0.286801] TCP: reno registered
[    0.286809] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.286838] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.286930] NET: Registered protocol family 1
[    0.510480] pci 0000:01:00.0: Video device with shadowed ROM
[    0.510486] PCI: CLS 32 bytes, default 64
[    0.510597] Trying to unpack rootfs image as initramfs...
[    0.733063] Freeing initrd memory: 9088K (f2b1e000 - f33fe000)
[    0.733112] sta2x11_mfd_init
[    0.733515] apm: BIOS not found.
[    0.734253] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.734341] audit: initializing netlink subsys (disabled)
[    0.734391] audit: type=2000 audit(1435668868.733:1): initialized
[    0.734970] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.739132] zpool: loaded
[    0.739137] zbud: loaded
[    0.739281] VFS: Disk quotas dquot_6.5.2
[    0.739379] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.740823] bounce: pool size: 64 pages
[    0.740906] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.740981] io scheduler noop registered
[    0.740986] io scheduler deadline registered
[    0.741086] io scheduler cfq registered (default)
[    0.741374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.741411] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.741563] GHES: HEST is not enabled!
[    0.741693] isapnp: Scanning for PnP cards...
[    0.742073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.762641] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.763486] Linux agpgart interface v0.103
[    0.763727] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
[    0.769186] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[    0.772841] brd: module loaded
[    0.773469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.773896] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.773907] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.774193] mousedev: PS/2 mouse device common for all mice
[    0.775181] rtc_cmos 00:01: RTC can wake from S4
[    0.775367] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.775399] rtc_cmos 00:01: alarms up to one year, 242 bytes nvram
[    0.775462] ledtrig-cpu: registered to indicate activity on CPUs
[    0.775700] TCP: cubic registered
[    0.775723] Key type dns_resolver registered
[    0.776098] Using IPI No-Shortcut mode
[    0.776373] registered taskstats version 1
[    0.778369] Btrfs loaded
[    0.778768]   Magic number: 3:418:937
[    0.778867] rtc_cmos 00:01: setting system clock to 2015-06-30 12:54:28 UTC (1435668868)
[    0.778941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.778944] EDD information not available.
[    0.779078] PM: Checking hibernation image partition UUID=175df66c-8070-4987-8b72-8bc592fd5c81
[    0.843416] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.099204] isapnp: No Plug & Play device found
[    1.375967] psmouse serio1: hgpk: ID: 10 00 64
[    1.735024] tsc: Refined TSC clocksource calibration: 3000.851 MHz
[    2.218779] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.223562] PM: Hibernation image not present or could not be loaded.
[    2.224397] Freeing unused kernel memory: 744K (c0a8f000 - c0b49000)
[    2.224600] Write protecting the kernel text: 6292k
[    2.224687] Write protecting the kernel read-only data: 2864k
[    2.316687] dracut: dracut-038
[    2.345506] pata_sis 0000:00:02.5: version 0.5.2
[    2.345809] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    2.347217] scsi host0: pata_sis
[    2.347434] scsi host1: pata_sis
[    2.347530] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.347535] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.517269] ata1.00: ATAPI: TSSTcorp CDW/DVD TS-H492C, IB01, max UDMA/33
[    2.539268] ata1.00: configured for UDMA/33
[    2.540163] scsi 0:0:0:0: CD-ROM            TSSTcorp CDW/DVD TS-H492C IB01 PQ: 0 ANSI: 5
[    2.706105] sata_sis 0000:00:05.0: version 1.0
[    2.706337] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[    2.707362] scsi host2: sata_sis
[    2.707564] scsi host3: sata_sis
[    2.707666] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xac00 bmdma 0xb800 irq 17
[    2.707671] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xb808 irq 17
[    2.735104] Switched to clocksource tsc
[    3.012048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.015359] ata3.00: ATA-6: ST380819AS                   40Y9045LEN, 3.04, max UDMA/133
[    3.015364] ata3.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.021351] ata3.00: configured for UDMA/133
[    3.021549] scsi 2:0:0:0: Direct-Access     ATA      ST380819AS       3.04 PQ: 0 ANSI: 5
[    3.021941] sd 2:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.022143] sd 2:0:0:0: [sda] Write Protect is off
[    3.022149] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.022209] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.081619]  sda: sda1 sda3 < sda5 sda6 sda7 sda8 >
[    3.082568] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.337833] ata4: SATA link down (SStatus 0 SControl 300)
[    3.363131] Uniform Multi-Platform E-IDE driver
[    3.534582] random: systemd-udevd urandom read with 22 bits of entropy available
[    3.634059] dracut: Starting plymouth daemon
[    3.837794] sr 0:0:0:0: [sr0] scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
[    3.837805] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.838201] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.924683] ACPI: bus type USB registered
[    3.924775] usbcore: registered new interface driver usbfs
[    3.924816] usbcore: registered new interface driver hub
[    3.924892] usbcore: registered new device driver usb
[    3.955668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.000467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.000475] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.002192] ehci-pci: EHCI PCI platform driver
[    4.006641] ehci-pci 0000:00:03.3: EHCI Host Controller
[    4.006674] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    4.006773] ehci-pci 0000:00:03.3: irq 23, io mem 0xec103000
[    4.012037] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    4.012195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.012203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.012209] usb usb1: Product: EHCI Host Controller
[    4.012216] usb usb1: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd
[    4.012221] usb usb1: SerialNumber: 0000:00:03.3
[    4.012649] hub 1-0:1.0: USB hub found
[    4.012673] hub 1-0:1.0: 8 ports detected
[    4.014932] ohci-pci: OHCI PCI platform driver
[    4.015301] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    4.015321] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    4.015400] ohci-pci 0000:00:03.0: irq 20, io mem 0xec100000
[    4.068150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.068157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.068161] usb usb2: Product: OHCI PCI host controller
[    4.068165] usb usb2: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.068168] usb usb2: SerialNumber: 0000:00:03.0
[    4.068507] hub 2-0:1.0: USB hub found
[    4.068531] hub 2-0:1.0: 3 ports detected
[    4.069074] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    4.069088] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    4.069139] ohci-pci 0000:00:03.1: irq 21, io mem 0xec101000
[    4.122137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.122144] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.122148] usb usb3: Product: OHCI PCI host controller
[    4.122152] usb usb3: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.122155] usb usb3: SerialNumber: 0000:00:03.1
[    4.122480] hub 3-0:1.0: USB hub found
[    4.122505] hub 3-0:1.0: 3 ports detected
[    4.123131] ohci-pci 0000:00:03.2: OHCI PCI host controller
[    4.123157] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[    4.123236] ohci-pci 0000:00:03.2: irq 22, io mem 0xec102000
[    4.176144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.176150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.176154] usb usb4: Product: OHCI PCI host controller
[    4.176157] usb usb4: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.176161] usb usb4: SerialNumber: 0000:00:03.2
[    4.176501] hub 4-0:1.0: USB hub found
[    4.176527] hub 4-0:1.0: 2 ports detected
[    4.203202] random: nonblocking pool is initialized
[    4.315076] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    4.430171] usb 1-5: New USB device found, idVendor=1058, idProduct=0820
[    4.430178] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    4.430183] usb 1-5: Product: My Passport 0820
[    4.430187] usb 1-5: Manufacturer: Western Digital
[    4.430190] usb 1-5: SerialNumber: 57584D3145313454504D5538
[    4.439456] usb-storage 1-5:1.0: USB Mass Storage device detected
[    4.439819] scsi host4: usb-storage 1-5:1.0
[    4.440056] usbcore: registered new interface driver usb-storage
[    4.442714] usbcore: registered new interface driver uas
[    4.532037] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    4.665537] usb 1-7: New USB device found, idVendor=148f, idProduct=5370
[    4.665543] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.665547] usb 1-7: Product: 802.11 n WLAN
[    4.665551] usb 1-7: Manufacturer: Ralink
[    4.665555] usb 1-7: SerialNumber: 1.0
[    4.829993] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[    4.830000] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    4.830033] PM: Basic memory bitmaps created
[    4.830658] PM: Basic memory bitmaps freed
[    4.836973] PM: Starting manual resume from disk
[    4.836983] PM: Hibernation image partition 8:6 present
[    4.836986] PM: Looking for hibernation image.
[    4.844689] PM: Image not found (code -22)
[    4.844695] PM: Hibernation image not present or could not be loaded.
[    4.951066] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.083505] dracut: Checking ext4: /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee
[    5.083859] dracut: issuing e2fsck -a  /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee
[    5.135225] dracut: /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee: clean, 240312/1916928 files, 2290644/7654716 blocks
[    5.138296] dracut: Mounting /dev/disk/by-uuid/bb65aa85-21f6-4f4d-b3a0-43891a1743ee with -o relatime,acl,ro
[    5.193159] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[    5.409033] dracut: Mounted root filesystem /dev/sda1
[    5.441807] scsi 4:0:0:0: Direct-Access     WD       My Passport 0820 1012 PQ: 0 ANSI: 6
[    5.444088] scsi 4:0:0:1: Enclosure         WD       SES Device       1012 PQ: 0 ANSI: 6
[    5.444418] sd 4:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    5.446407] sd 4:0:0:0: [sdb] Write Protect is off
[    5.446415] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    5.448406] sd 4:0:0:0: [sdb] No Caching mode page found
[    5.448413] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    5.711712] dracut: Switching root
[    5.760319] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    6.419599] NET: Registered protocol family 10
[    7.572487] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    8.388033] RPC: Registered named UNIX socket transport module.
[    8.388040] RPC: Registered udp transport module.
[    8.388042] RPC: Registered tcp transport module.
[    8.388045] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.722972] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[    8.828276] EXT4-fs (sda1): re-mounted. Opts: acl
[    8.935954] systemd-journald[454]: Received request to flush runtime journal from PID 1
[    9.268638]  sdb: sdb1
[    9.271835] sd 4:0:0:0: [sdb] Attached SCSI disk
[   14.083671] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   14.083800] ACPI: Power Button [PWRB]
[   14.083979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   14.084096] ACPI: Power Button [PWRF]
[   14.362405] IT8705 SuperIO detected.
[   14.362725] parport_pc 00:03: reported by Plug and Play ACPI
[   14.362806] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   15.074497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.221138] sis630_smbus 0000:00:02.0: SIS630 compatible bus not detected, module not inserted.
[   15.457288] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   15.457301] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   15.463140] 8139too: 8139too Fast Ethernet driver 0.9.28
[   15.464297] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xf3c26000, 00:14:85:77:a6:20, IRQ 17
[   15.547785] sisfb: Video ROM found
[   15.547906] sisfb: Video RAM at 0xe0000000, mapped to 0xf4080000, size 32768k
[   15.547910] sisfb: MMIO at 0xec000000, mapped to 0xf3c40000, size 128k
[   15.547913] sisfb: Memory heap starting at 32160K, size 32K
[   15.635252] sisfb: CRT1 DDC supported
[   15.635259] sisfb: CRT1 DDC level: 2 
[   15.773370] ppdev: user-space parallel port driver
[   15.805756] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
[   15.827899] sisfb: Monitor range H 30-83KHz, V 55-76Hz, Max. dotclock 170MHz
[   15.827911] sisfb: Default mode is 800x600x8 (60Hz)
[   15.827920] sisfb: Initial vbflags 0x0
[   15.830076] fbcon:  (fb0) is primary device
[   15.847683] Console: switching to colour frame buffer device 100x37
[   15.849571] sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
[   15.849574] fb0: SiS 661 frame buffer device version 1.8.9
[   15.849575] sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
[   15.886277] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
[   15.886463] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   16.194440] ses 4:0:0:1: Attached Enclosure device
[   16.342072] 8139too 0000:00:0f.0 enp0s15: renamed from eth0
[   16.535051] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 50814 usecs (2445 samples)
[   16.535059] snd_intel8x0 0000:00:02.7: clocking to 48000
[   16.731166] fuse init (API version 7.23)
[   17.660306] Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k FS
[   17.742825] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
[   17.935669] cfg80211: Calling CRDA to update world regulatory domain
[   18.024066] cfg80211: World regulatory domain updated:
[   18.024075] cfg80211:  DFS Master region: unset
[   18.024078] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.024084] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.024088] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.024091] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   18.024095] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   18.024099] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   18.024103] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   18.024106] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   18.024109] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   18.168055] usb 1-7: reset high-speed USB device number 3 using ehci-pci
[   18.295022] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   18.323262] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[   18.361305] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.362142] usbcore: registered new interface driver rt2800usb
[   18.369937] rt2800usb 1-7:1.0 wlp0s3f3u7: renamed from wlan0
[   18.405479] cfg80211: Calling CRDA for country: NL
[   18.411441] cfg80211: Regulatory domain changed to country: NL
[   18.411453] cfg80211:  DFS Master region: ETSI
[   18.411457] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.411463] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.411470] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   18.411477] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   18.411482] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   18.411488] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   25.275759] sd_festival[762]: segfault at 68 ip b75a71c9 sp bfc97220 error 4 in libpthread-2.20.so[b759b000+17000]
[   28.634888] 8139too 0000:00:0f.0 enp0s15: link down
[   28.635076] IPv6: ADDRCONF(NETDEV_UP): enp0s15: link is not ready
[   28.741468] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   28.906150] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   29.103723] IPv6: ADDRCONF(NETDEV_UP): wlp0s3f3u7: link is not ready
[   29.390142] IPv6: ADDRCONF(NETDEV_UP): wlp0s3f3u7: link is not ready
[   29.826284] NET: Registered protocol family 17
[   30.387921] wlp0s3f3u7: authenticate with 9c:c7:a6:0b:60:15
[   30.420414] wlp0s3f3u7: send auth to 9c:c7:a6:0b:60:15 (try 1/3)
[   30.423061] wlp0s3f3u7: authenticated
[   30.424040] wlp0s3f3u7: associate with 9c:c7:a6:0b:60:15 (try 1/3)
[   30.430059] wlp0s3f3u7: RX AssocResp from 9c:c7:a6:0b:60:15 (capab=0x431 status=0 aid=3)
[   30.436908] wlp0s3f3u7: associated
[   30.436978] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s3f3u7: link becomes ready
[   30.437144] cfg80211: Calling CRDA for country: DE
[   30.603737] cfg80211: Regulatory domain changed to country: DE
[   30.603747] cfg80211:  DFS Master region: ETSI
[   30.603751] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   30.603758] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   30.603766] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   30.603773] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   30.603779] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[   30.603785] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   43.437689] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   43.545934] ip_tables: (C) 2000-2006 Netfilter Core Team
[   47.077989] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   47.336628] Netfilter messages via NETLINK v0.30.
[   47.348271] ctnetlink v0.93: registering with nfnetlink.
[   48.293324] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   48.981503] xt_CT: No such helper "irc"
[   48.998411] xt_CT: No such helper "irc-0"
[   49.044911] xt_CT: No such helper "snmp"
[   49.057461] xt_CT: No such helper "pptp"
[   49.078193] xt_CT: No such helper "netbios-ns"
[   49.315438] xt_addrtype: ipv6 does not support BROADCAST matching
[   49.516609] ip_set: protocol 6
[   49.707485] netfilter PSD loaded - (c) astaro AG
[   49.718431] IFWLOG: register target

Actions: View

Attachments on bug 16197: 6775 | 6792 | 6793 | 6794