Attachment 6705 Details for Bug 15266 – hp-check_output_david

hp-check_output_david

file_15266.txt (text/plain), 11.76 KB, created by David GEIGER on 2015-06-05 07:37:36 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: David GEIGER

Created: 2015-06-05 07:37:36 CEST

Size: 11.76 KB

patch

obsolete

>$ hp-check 
>Saving output in log file: /home/david/hp-check.log
>
>HP Linux Imaging and Printing System (ver. 3.15.4)
>Dependency/Version Check Utility ver. 15.1
>
>Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
>This software comes with ABSOLUTELY NO WARRANTY.
>This is free software, and you are welcome to distribute it
>under certain conditions. See COPYING file for more details.
>
>Note: hp-check can be run in three modes:
>1. Compile-time check mode (-c or --compile): Use this mode before compiling the
>HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
>are installed to successfully compile HPLIP.                                    
>2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
>supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
>has the proper dependencies installed to successfully run.                      
>3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
>will check both of the above cases (both compile- and run-time dependencies).   
>
>Check types:                                                                    
>a. EXTERNALDEP - External Dependencies                                          
>b. GENERALDEP - General Dependencies (required both at compile and run time)    
>c. COMPILEDEP - Compile time Dependencies                                       
>d. [All are run-time checks]                                                    
>PYEXT SCANCONF QUEUES PERMISSION                                                
>
>Status Types:
>    OK
>    MISSING       - Missing Dependency or Permission or Plug-in
>    INCOMPAT      - Incompatible dependency-version or Plugin-version
>
>warning: mandrake distro is not found in AUTH_TYPES
>-Gtk-Message: Failed to load module "canberra-gtk-module"
>/Gtk-Message: Failed to load module "canberra-gtk-module"
>warning: unknown-4 version is not supported. Using unknown-0 versions dependencies to verify and install...
>
>---------------
>| SYSTEM INFO |
>---------------
>
> Kernel: 3.14.43-desktop-1.mga4 #1 SMP Thu May 21 21:25:55 UTC 2015 GNU/Linux
> Host: david.david
> Proc: 3.14.43-desktop-1.mga4 #1 SMP Thu May 21 21:25:55 UTC 2015 GNU/Linux
> Distribution: unknown 4
> Bitness: 64 bit
>
>
>-----------------------
>| HPLIP CONFIGURATION |
>-----------------------
>
>HPLIP-Version: HPLIP 3.15.4
>HPLIP-Home: /usr/share/hplip
>warning: HPLIP-Installation: Auto installation is not supported for unknown distro  4 version 
>
>Current contents of '/etc/hp/hplip.conf' file:
># hplip.conf.  Generated from hplip.conf.in by configure.
>
>[hplip]
>version=3.15.4
>
>[dirs]
>home=/usr/share/hplip
>run=/var/run
>ppd=/usr/share/ppd/HP
>ppdbase=/usr/share/ppd
>doc=/usr/share/doc/hplip-3.15.4
>html=/usr/share/doc/hplip-3.15.4
>icon=/usr/share/applications
>cupsbackend=/usr/lib/cups/backend
>cupsfilter=/usr/lib/cups/filter
>drv=/usr/share/cups/drv/hp
>bin=/usr/bin
>
># Following values are determined at configure time and cannot be changed.
>[configure]
>network-build=yes
>libusb01-build=no
>pp-build=yes
>gui-build=yes
>scanner-build=yes
>fax-build=yes
>dbus-build=yes
>cups11-build=no
>doc-build=yes
>shadow-build=no
>hpijs-install=yes
>foomatic-drv-install=no
>foomatic-ppd-install=no
>foomatic-rip-hplip-install=no
>hpcups-install=yes
>cups-drv-install=yes
>cups-ppd-install=yes
>internal-tag=3.15.4
>restricted-build=no
>ui-toolkit=qt4
>qt3=no
>qt4=yes
>policy-kit=yes
>lite-build=no
>udev_sysfs_rules=no
>hpcups-only-build=no
>hpijs-only-build=no
>
>
>Current contents of '/var/lib/hp/hplip.state' file:
>[plugin]
>installed = 1
>eula = 1
>version = 3.15.4
>
>
>
>Current contents of '~/.hplip/hplip.conf' file:
>[settings]
>systray_visible = 0
>systray_messages = 0
>
>[last_used]
>device_uri = "hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R"
>printer_name = HP-Color-LaserJet-CM1015
>working_dir = .
>
>[commands]
>scan = /usr/bin/xsane -V %SANE_URI%
>
>[refresh]
>rate = 30
>enable = false
>type = 1
>
>[polling]
>enable = false
>interval = 5
>device_list = 
>
>[fax]
>voice_phone = 
>email_address = 
>
>[upgrade]
>notify_upgrade = false
>last_upgraded_time = 1433345801
>pending_upgrade_time = 0
>
>[installation]
>date_time = 05/06/2015 07:31:18
>version = 3.15.4
>
>
> <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>
>
>--------------------------
>|  External Dependencies |
>--------------------------
>
> gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.10            OK         -
> scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.24          OK         -
>Gtk-Message: Failed to load module "canberra-gtk-module"
>Gtk-Message: Failed to load module "canberra-gtk-module"
> xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.998           OK         -
> error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
> policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.112           OK         -
> network              network -wget                                                OPTIONAL        -               1.14            OK         -
> avahi-utils          avahi-utils                                                  OPTIONAL        -               0.6.31          OK         -
> error: dbus          DBus - Message bus system                                    REQUIRED        -               1.6.18          MISSING    'DBUS may not be installed or not running'
>
>-------------------------
>|  General Dependencies |
>-------------------------
>
> error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.0.1           MISSING    'libcrypto needs to be installed'
> python-dbus          Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.0           OK         -
> reportlab            Reportlab - PDF library for Python                           OPTIONAL        2.0             2.7             OK         -
> python-notify        Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
> pyqt4                PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             4.10.3          OK         -
> python-xml           Python XML libraries                                         REQUIRED        -               2.1.0           OK         -
> error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
> error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
> error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
> error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
> pil                  PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
> python2X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             2.7.9           OK         -
> pyqt4-dbus           PyQt 4 DBus - DBus Support for PyQt4                         REQUIRED        4.0             4.10.3          OK         -
> error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
> libpthread           libpthread - POSIX threads library                           REQUIRED        -               2.18            OK         -
> python-devel         Python devel - Python development files                      REQUIRED        2.2             2.7.9           OK         -
> error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
> sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
>
>---------------
>|  COMPILEDEP |
>---------------
>
> error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'
> gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               4.8.2           OK         -
> make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.0             OK         -
>
>----------------------
>|  Python Extentions |
>----------------------
>
> cupsext              CUPS-Extension                                               REQUIRED        -               3.15.4          OK         -
> hpmudext             IO-Extension                                                 REQUIRED        -               3.15.4          OK         -
>
>-----------------------
>|  Scan Configuration |
>-----------------------
>
> scanext              Scan-SANE-Extension                                          REQUIRED        -               3.15.4          OK         -
> hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.15.4          OK         'hpaio found in /etc/sane.d/dll.conf'
>
>-----------------------
>|  Other Dependencies |
>-----------------------
>
>
>------------------------------
>| DISCOVERED SCANNER DEVICES |
>------------------------------
>
>device `v4l:/dev/video0' is a Noname ASUS USB2.0 WebCam virtual device
>
>
>--------------------------
>| DISCOVERED USB DEVICES |
>--------------------------
>
>No devices found.
>
>---------------------------------
>| INSTALLED CUPS PRINTER QUEUES |
>---------------------------------
>
> 
>Hewlett-Packard-HP-Color-LaserJet-CM1015
>----------------------------------------
>Type: Printer
>Device URI: hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R
>PPD: /etc/cups/ppd/Hewlett-Packard-HP-Color-LaserJet-CM1015.ppd
>PPD Description: HP Color LaserJet CM1015 Postscript (recommended)
>Printer status: printer Hewlett-Packard-HP-Color-LaserJet-CM1015 is idle.  enabled since lun. 06 avril 2015 17:52:44 CEST
>Required plug-in status: Installed
>error: Unable to communicate with device (code=12): hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R
>error: Device not found
>error: Communication status: Failed
>
>HP-Photosmart-C4200-series
>--------------------------
>Type: Printer
>Device URI: hp:/usb/Photosmart_C4200_series?serial=MY768FQ0N004VP
>PPD: /etc/cups/ppd/HP-Photosmart-C4200-series.ppd
>PPD Description: HP Photosmart c4200 Series, hpcups 3.13.9
>Printer status: printer HP-Photosmart-C4200-series is idle.  enabled since lun. 06 avril 2015 17:52:53 CEST
>error: Unable to communicate with device (code=12): hp:/usb/Photosmart_C4200_series?serial=MY768FQ0N004VP
>error: Device not found
>error: Communication status: Failed
>
>
>--------------
>| PERMISSION |
>--------------
>
> 
>-----------
>| SUMMARY |
>-----------
>
>Missing Required Dependencies
>-----------------------------
>None
>
>Missing Optional Dependencies
>-----------------------------
>None
>
>
>Total Errors: 12
>Total Warnings: 0
>
>
>Done.

$ hp-check 
Saving output in log file: /home/david/hp-check.log

HP Linux Imaging and Printing System (ver. 3.15.4)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: mandrake distro is not found in AUTH_TYPES
-Gtk-Message: Failed to load module "canberra-gtk-module"
/Gtk-Message: Failed to load module "canberra-gtk-module"
warning: unknown-4 version is not supported. Using unknown-0 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.14.43-desktop-1.mga4 #1 SMP Thu May 21 21:25:55 UTC 2015 GNU/Linux
 Host: david.david
 Proc: 3.14.43-desktop-1.mga4 #1 SMP Thu May 21 21:25:55 UTC 2015 GNU/Linux
 Distribution: unknown 4
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.15.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro  4 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.15.4

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.15.4
html=/usr/share/doc/hplip-3.15.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.15.4
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.15.4



Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R"
printer_name = HP-Color-LaserJet-CM1015
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 

[upgrade]
notify_upgrade = false
last_upgraded_time = 1433345801
pending_upgrade_time = 0

[installation]
date_time = 05/06/2015 07:31:18
version = 3.15.4


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.10            OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.24          OK         -
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.998           OK         -
 error: cups          CUPS - Common Unix Printing System                           REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.112           OK         -
 network              network -wget                                                OPTIONAL        -               1.14            OK         -
 avahi-utils          avahi-utils                                                  OPTIONAL        -               0.6.31          OK         -
 error: dbus          DBus - Message bus system                                    REQUIRED        -               1.6.18          MISSING    'DBUS may not be installed or not running'

-------------------------
|  General Dependencies |
-------------------------

 error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.0.1           MISSING    'libcrypto needs to be installed'
 python-dbus          Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.0           OK         -
 reportlab            Reportlab - PDF library for Python                           OPTIONAL        2.0             2.7             OK         -
 python-notify        Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               OK         -
 pyqt4                PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             4.10.3          OK         -
 python-xml           Python XML libraries                                         REQUIRED        -               2.1.0           OK         -
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 pil                  PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               1.1.7           OK         -
 python2X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             2.7.9           OK         -
 pyqt4-dbus           PyQt 4 DBus - DBus Support for PyQt4                         REQUIRED        4.0             4.10.3          OK         -
 error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 libpthread           libpthread - POSIX threads library                           REQUIRED        -               2.18            OK         -
 python-devel         Python devel - Python development files                      REQUIRED        2.2             2.7.9           OK         -
 error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -

---------------
|  COMPILEDEP |
---------------

 error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'
 gcc                  gcc - GNU Project C and C++ Compiler                         REQUIRED        -               4.8.2           OK         -
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.0             OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.15.4          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.15.4          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 scanext              Scan-SANE-Extension                                          REQUIRED        -               3.15.4          OK         -
 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.15.4          OK         'hpaio found in /etc/sane.d/dll.conf'

-----------------------
|  Other Dependencies |
-----------------------


------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `v4l:/dev/video0' is a Noname ASUS USB2.0 WebCam virtual device


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Hewlett-Packard-HP-Color-LaserJet-CM1015
----------------------------------------
Type: Printer
Device URI: hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R
PPD: /etc/cups/ppd/Hewlett-Packard-HP-Color-LaserJet-CM1015.ppd
PPD Description: HP Color LaserJet CM1015 Postscript (recommended)
Printer status: printer Hewlett-Packard-HP-Color-LaserJet-CM1015 is idle.  enabled since lun. 06 avril 2015 17:52:44 CEST
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_Color_LaserJet_CM1015?serial=00CNCY6CXG1R
error: Device not found
error: Communication status: Failed

HP-Photosmart-C4200-series
--------------------------
Type: Printer
Device URI: hp:/usb/Photosmart_C4200_series?serial=MY768FQ0N004VP
PPD: /etc/cups/ppd/HP-Photosmart-C4200-series.ppd
PPD Description: HP Photosmart c4200 Series, hpcups 3.13.9
Printer status: printer HP-Photosmart-C4200-series is idle.  enabled since lun. 06 avril 2015 17:52:53 CEST
error: Unable to communicate with device (code=12): hp:/usb/Photosmart_C4200_series?serial=MY768FQ0N004VP
error: Device not found
error: Communication status: Failed


--------------
| PERMISSION |
--------------

 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None


Total Errors: 12
Total Warnings: 0


Done.

Actions: View

Attachments on bug 15266: 5909 | 5910 | 5911 | 5912 | 6704 | 6705 | 6895 | 6896 | 6897