Attachment 655 Details for Bug 2167 – dmesg

dmesg

dmesg (text/plain), 33.00 KB, created by Barry Jackson on 2011-07-16 17:58:29 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Barry Jackson

Created: 2011-07-16 17:58:29 CEST

Size: 33.00 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.0.0-desktop-0.rc7.2.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Jul 15 16:03:20 UTC 2011
>Command line: BOOT_IMAGE=linux root=LABEL=cauldron nokmsboot resume=UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8 splash=silent vga=785
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.3 present.
>DMI:          K8Upgrade-NF3/K8Upgrade-NF3, BIOS P2.40 07/16/2007
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>AGP bridge at 00:00:00
>Aperture from AGP @ f8000000 old size 32 MB
>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
>Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
>last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FFC0000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff88000009a000] 9a000 size 20480
>init_memory_mapping: 0000000000000000-000000003ffb0000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffb0000 page 4k
>kernel direct mapping tables up to 3ffb0000 @ 3ffad000-3ffb0000
>RAMDISK: 37b3e000 - 37ff0000
>ACPI: RSDP 00000000000f88c0 00014 (v00 ACPIAM)
>ACPI: RSDT 000000003ffb0000 00030 (v01 A_M_I  OEMRSDT  07000716 MSFT 00000097)
>ACPI: FACP 000000003ffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
>ACPI: DSDT 000000003ffb03f0 03F83 (v01  K8UNF K8UNF233 00000233 INTL 02002026)
>ACPI: FACS 000000003ffc0000 00040
>ACPI: APIC 000000003ffb0390 0005C (v01 A_M_I  OEMAPIC  07000716 MSFT 00000097)
>ACPI: OEMB 000000003ffc0040 00056 (v01 A_M_I  AMI_OEM  07000716 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ffb0000
>Initmem setup node 0 0000000000000000-000000003ffb0000
>  NODE_DATA [000000003ffa8000 - 000000003ffacfff]
> [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffb0
>On node 0 totalpages: 261951
>  DMA zone: 56 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3922 pages, LIFO batch:0
>  DMA32 zone: 3527 pages used for memmap
>  DMA32 zone: 254441 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 25 pages/cpu @ffff88003fc00000 s71616 r8192 d22592 u1048576
>pcpu-alloc: s71616 r8192 d22592 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258363
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=linux root=LABEL=cauldron nokmsboot resume=UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8 splash=silent vga=785
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>AGP bridge at 00:00:00
>Aperture from AGP @ f8000000 old size 32 MB
>Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
>Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
>Node 0: aperture @ f8000000 size 64 MB
>Memory: 1017024k/1048256k available (4188k kernel code, 452k absent, 30780k reserved, 5237k data, 728k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>allocated 8388608 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Fast TSC calibration using PIT
>Detected 2210.856 MHz processor.
>Marking TSC unstable due to TSCs unsynchronized
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.71 BogoMIPS (lpj=2210856)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>tseg: 0000000000
>mce: CPU supports 5 MCE banks
>SMP alternatives: switching to UP code
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110413
>ftrace: allocating 16570 entries in 65 pages
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>MCE: In-kernel MCE decoding enabled.
>Brought up 1 CPUs
>Total of 1 processors activated (4421.71 BogoMIPS).
>devtmpfs: initialized
>PM: Registering ACPI NVS region at 3ffc0000 (196608 bytes)
>Time: 17:25:09  Date: 07/16/11
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 0000000040000000 aka 1024M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [40000000, fe0bffff]
>bus: [00, ff] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0x40000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [ISAV] (on)
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
>pci 0000:00:00.0: [10de:00e1] type 0 class 0x000600
>pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
>pci 0000:00:01.0: [10de:00e0] type 0 class 0x000601
>pci 0000:00:01.1: [10de:00e4] type 0 class 0x000c05
>pci 0000:00:01.1: reg 10: [io  0x5080-0x509f]
>pci 0000:00:01.1: reg 20: [io  0x5000-0x503f]
>pci 0000:00:01.1: reg 24: [io  0x5040-0x507f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: [10de:00e7] type 0 class 0x000c03
>pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: [10de:00e7] type 0 class 0x000c03
>pci 0000:00:02.1: reg 10: [mem 0xfebfe000-0xfebfefff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:02.2: [10de:00e8] type 0 class 0x000c03
>pci 0000:00:02.2: reg 10: [mem 0xfebfdc00-0xfebfdcff]
>pci 0000:00:02.2: supports D1 D2
>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.2: PME# disabled
>pci 0000:00:05.0: [10de:00df] type 0 class 0x000680
>pci 0000:00:05.0: reg 10: [mem 0xfebfc000-0xfebfcfff]
>pci 0000:00:05.0: reg 14: [io  0xec00-0xec07]
>pci 0000:00:05.0: supports D1 D2
>pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:08.0: [10de:00e5] type 0 class 0x000101
>pci 0000:00:08.0: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:0a.0: [10de:00e3] type 0 class 0x000101
>pci 0000:00:0a.0: reg 10: [io  0x0f80-0x0f87]
>pci 0000:00:0a.0: reg 14: [io  0x0f00-0x0f03]
>pci 0000:00:0a.0: reg 18: [io  0x0e80-0x0e87]
>pci 0000:00:0a.0: reg 1c: [io  0x0e00-0x0e03]
>pci 0000:00:0a.0: reg 20: [io  0xe000-0xe00f]
>pci 0000:00:0a.0: reg 24: [io  0xd800-0xd87f]
>pci 0000:00:0b.0: [10de:00e2] type 1 class 0x000604
>pci 0000:00:0e.0: [10de:00ed] type 1 class 0x000604
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>PCI: peer root bus 00 res updated from pci conf
>pci 0000:01:00.0: [10de:0311] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff pref]
>pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
>pci 0000:00:0b.0: PCI bridge to [bus 01-01]
>pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:0b.0:   bridge window [mem 0xfc800000-0xfe8fffff]
>pci 0000:00:0b.0:   bridge window [mem 0xe4700000-0xf46fffff pref]
>pci 0000:02:05.0: [104c:8024] type 0 class 0x000c00
>pci 0000:02:05.0: reg 10: [mem 0xfeaff800-0xfeafffff]
>pci 0000:02:05.0: reg 14: [mem 0xfeaf8000-0xfeafbfff]
>pci 0000:02:05.0: supports D1 D2
>pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:05.0: PME# disabled
>pci 0000:02:06.0: [1095:3512] type 0 class 0x000104
>pci 0000:02:06.0: reg 10: [io  0xc880-0xc887]
>pci 0000:02:06.0: reg 14: [io  0xc800-0xc803]
>pci 0000:02:06.0: reg 18: [io  0xc480-0xc487]
>pci 0000:02:06.0: reg 1c: [io  0xc400-0xc403]
>pci 0000:02:06.0: reg 20: [io  0xc080-0xc08f]
>pci 0000:02:06.0: reg 24: [mem 0xfeaff400-0xfeaff5ff]
>pci 0000:02:06.0: reg 30: [mem 0xfea00000-0xfea7ffff pref]
>pci 0000:02:06.0: supports D1 D2
>pci 0000:02:07.0: [1102:0004] type 0 class 0x000401
>pci 0000:02:07.0: reg 10: [io  0xc000-0xc03f]
>pci 0000:02:07.0: supports D1 D2
>pci 0000:02:07.1: [1102:7003] type 0 class 0x000980
>pci 0000:02:07.1: reg 10: [io  0xcc00-0xcc07]
>pci 0000:02:07.1: supports D1 D2
>pci 0000:02:07.2: [1102:4001] type 0 class 0x000c00
>pci 0000:02:07.2: reg 10: [mem 0xfeafe800-0xfeafefff]
>pci 0000:02:07.2: reg 14: [mem 0xfeaf4000-0xfeaf7fff]
>pci 0000:02:07.2: supports D1 D2
>pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:07.2: PME# disabled
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0e.0:   bridge window [mem 0xfe900000-0xfeafffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
>ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5
>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3
>ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
>ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10
>ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: address space collision: [mem 0xf8000000-0xfbffffff pref] conflicts with GART [mem 0xf8000000-0xfbffffff]
>reserve RAM buffer: 000000000009f400 - 000000000009ffff 
>reserve RAM buffer: 000000003ffb0000 - 000000003fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x40000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: [io  0x0000-0x000f]
>pnp 00:01: [io  0x0081-0x0083]
>pnp 00:01: [io  0x0087]
>pnp 00:01: [io  0x0089-0x008b]
>pnp 00:01: [io  0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x0070-0x0071]
>pnp 00:02: [irq 8]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: [io  0x0061]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:04: [io  0x00f0-0x00ff]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x03f0-0x03f5]
>pnp 00:05: [io  0x03f7]
>pnp 00:05: [irq 6]
>pnp 00:05: [dma 2]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:06: [io  0x0378-0x037f]
>pnp 00:06: [io  0x0778-0x077f]
>pnp 00:06: [irq 7]
>pnp 00:06: [dma 3]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
>pnp 00:07: [io  0x0010-0x001f]
>pnp 00:07: [io  0x0022-0x003f]
>pnp 00:07: [io  0x0044-0x005f]
>pnp 00:07: [io  0x0062-0x0063]
>pnp 00:07: [io  0x0065-0x006f]
>pnp 00:07: [io  0x0072-0x007f]
>pnp 00:07: [io  0x0080]
>pnp 00:07: [io  0x0084-0x0086]
>pnp 00:07: [io  0x0088]
>pnp 00:07: [io  0x008c-0x008e]
>pnp 00:07: [io  0x0090-0x009f]
>pnp 00:07: [io  0x00a2-0x00bf]
>pnp 00:07: [io  0x00e0-0x00ef]
>pnp 00:07: [io  0x04d0-0x04d1]
>pnp 00:07: [io  0x4000-0x407f]
>pnp 00:07: [io  0x4080-0x40ff]
>system 00:07: [io  0x04d0-0x04d1] has been reserved
>system 00:07: [io  0x4000-0x407f] has been reserved
>system 00:07: [io  0x4080-0x40ff] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [mem 0xfec00000-0xfec00fff]
>pnp 00:08: [mem 0xfee00000-0xfeefffff]
>pnp 00:08: [mem 0xff7c0000-0xffffffff]
>system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:08: [mem 0xff7c0000-0xffffffff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x0060]
>pnp 00:09: [io  0x0064]
>pnp 00:09: [irq 1]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0a: [irq 12]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>pnp 00:0b: [io  0x03f8-0x03ff]
>pnp 00:0b: [irq 4]
>pnp 00:0b: [dma 0 disabled]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:0c: [io  0x0290-0x029f]
>system 00:0c: [io  0x0290-0x029f] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [mem 0x00000000-0x0009ffff]
>pnp 00:0d: [mem 0x000c0000-0x000cffff]
>pnp 00:0d: [mem 0x000e0000-0x000fffff]
>pnp 00:0d: [mem 0x00100000-0x3fffffff]
>pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
>pnp 00:0d: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
>pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
>pnp 00:0d: disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
>system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>Switching to clocksource acpi_pm
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:0b.0: PCI bridge to [bus 01-01]
>pci 0000:00:0b.0:   bridge window [io  disabled]
>pci 0000:00:0b.0:   bridge window [mem 0xfc800000-0xfe8fffff]
>pci 0000:00:0b.0:   bridge window [mem 0xe4700000-0xf46fffff pref]
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0e.0:   bridge window [mem 0xfe900000-0xfeafffff]
>pci 0000:00:0e.0:   bridge window [mem pref disabled]
>pci 0000:00:0e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
>pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfe8fffff]
>pci_bus 0000:01: resource 2 [mem 0xe4700000-0xf46fffff pref]
>pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff]
>NET: Registered protocol family 2
>Switched to NOHz mode on CPU #0
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4808k freed
>agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
>agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
>agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
>agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1310837109.216:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1995
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: mode is 640x480x16, linelength=1280, pages=4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: framebuffer at 0xe8000000, mapped to 0xffffc90000500000, using 1200k, total 131072k
>Console: switching to colour frame buffer device 80x30
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Linux agpgart interface v0.103
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>PM: Checking hibernation image partition UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 3:386:441
>rtc_cmos 00:02: setting system clock to 2011-07-16 17:25:09 UTC (1310837109)
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>Freeing unused kernel memory: 728k freed
>Write protecting the kernel read-only data: 8192k
>Freeing unused kernel memory: 1936k freed
>Freeing unused kernel memory: 104k freed
>nash-hotplug (34): /proc/34/oom_adj is deprecated, please use /proc/34/oom_score_adj instead.
>logips2pp: Detected unknown logitech mouse model 63
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:02.2: setting latency timer to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.2: irq 22, io mem 0xfebfdc00
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebff000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
>ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.1: setting latency timer to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 20, io mem 0xfebfe000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ohci_hcd
>usb usb3: SerialNumber: 0000:00:02.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_sil 0000:02:06.0: version 2.4
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
>sata_sil 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xfeaff400 tf 0xfeaff480 irq 19
>ata2: SATA max UDMA/100 mmio m512@0xfeaff400 tf 0xfeaff4c0 irq 19
>usb 1-3: new high speed USB device number 2 using ehci_hcd
>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-8: WDC WD10EAVS-32D7B1, 01.01A01, max UDMA/133
>ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EAVS-32D 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 1-3: New USB device found, idVendor=0840, idProduct=00a1
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: Product: USB 2.0 Mass Storage Device
>usb 1-3: Manufacturer: Generic
>usb 1-3: SerialNumber: 00A10000000025152
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
>ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
>sd 1:0:0:0: [sdb] Attached SCSI disk
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sata_nv 0000:00:0a.0: version 3.5
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
>sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:0a.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 22
>ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 22
>usb 3-2: new full speed USB device number 2 using ohci_hcd
>usb 3-2: New USB device found, idVendor=041e, idProduct=4053
>usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ata3: SATA link down (SStatus 0 SControl 300)
>usb 2-4: new low speed USB device number 2 using ohci_hcd
>ata4: SATA link down (SStatus 0 SControl 300)
>pata_amd 0000:00:08.0: version 0.4.1
>pata_amd 0000:00:08.0: power state changed by ACPI to D0
>pata_amd 0000:00:08.0: power state changed by ACPI to D0
>pata_amd 0000:00:08.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>usb 2-4: New USB device found, idVendor=1ea7, idProduct=0002
>usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-4: Product: 2.4GHZ Mouse
>input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
>generic-usb 0003:1EA7:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4GHZ Mouse] on usb-0000:00:02.0-4/input0
>input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input3
>generic-usb 0003:1EA7:0002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4GHZ Mouse] on usb-0000:00:02.0-4/input1
>ata6.00: ATAPI: ATAPI   CDRW 52X32, Y.BS, max UDMA/33
>ata6.01: ATAPI: SONY    DVD RW DRU-700A, VY02, max UDMA/33
>ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
>ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
>ata6.00: configured for UDMA/33
>ata6.01: configured for UDMA/33
>scsi 5:0:0:0: CD-ROM            ATAPI    CDRW 52X32       Y.BS PQ: 0 ANSI: 5
>scsi 5:0:1:0: CD-ROM            SONY     DVD RW DRU-700A  VY02 PQ: 0 ANSI: 5
>EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udevd[119]: starting version 172
>EDAC MC: Ver: 2.1.0
>Floppy drive(s): fd0 is 1.44M
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>FDC 0 is a post-1991 82077
>wmi: Mapper loaded
>AMD64 EDAC driver v3.4.0
>EDAC amd64: DRAM ECC disabled.
>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> (Note that use of the override may cause unknown side effects.)
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
>powernow-k8: fid 0xe (2200 MHz), vid 0x2
>powernow-k8: fid 0xc (2000 MHz), vid 0x6
>powernow-k8: fid 0xa (1800 MHz), vid 0xa
>powernow-k8: fid 0x2 (1000 MHz), vid 0x12
>ppdev: user-space parallel port driver
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
>nouveau 0000:01:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
>[drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031100a1)
>checking generic (e8000000 8000000) vs hw (e8000000 8000000)
>fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BMP BIOS found
>[drm] nouveau 0000:01:00.0: BMP version 5.39
>[drm] nouveau 0000:01:00.0: Bios version 04.31.20.52
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003
>[drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEC78
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEFD7
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF13A
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF2AA
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF2C7
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2E4
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF4C1
>[drm] nouveau 0000:01:00.0: Detected monitoring device: max6646
>[drm] nouveau 0000:01:00.0: 2 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: memory 800MHz core 235MHz voltage 1220mV fanspeed 99%
>[drm] nouveau 0000:01:00.0: 1: memory 800MHz core 400MHz voltage 1390mV fanspeed 100%
>[drm] nouveau 0000:01:00.0: c: memory 501MHz core 234MHz voltage 1220mV
>[TTM] Zone  kernel: Available graphics memory: 512300 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
>agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
>agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8 mode.
>agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
>nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
>[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
>[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
>[drm] nouveau 0000:01:00.0: Load detected on output B
>[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff880037b96c00
>fbcon: nouveaufb (fb0) is primary device
>Console: switching to colour frame buffer device 90x36
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
>nvidia: module license 'NVIDIA' taints kernel.
>Disabling lock debugging due to kernel taint
>NVRM: The NVIDIA probe routine was not called for 1 device(s).
>NVRM: This can occur when a driver such as nouveau, rivafb,
>NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
>NVRM: the NVIDIA device(s).
>NVRM: Try unloading the conflicting kernel module (and/or
>NVRM: reconfigure your kernel without the conflicting
>NVRM: driver(s)), then try loading the NVIDIA kernel module
>NVRM: again.
>NVRM: No NVIDIA graphics adapter probed!
>EXT4-fs (sdb5): re-mounted. Opts: acl
>EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl
>Adding 4095468k swap on /dev/sda6.  Priority:-1 extents:1 across:4095468k

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-desktop-0.rc7.2.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Jul 15 16:03:20 UTC 2011
Command line: BOOT_IMAGE=linux root=LABEL=cauldron nokmsboot resume=UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8 splash=silent vga=785
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
 BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
 BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
 BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI:          K8Upgrade-NF3/K8Upgrade-NF3, BIOS P2.40 07/16/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
AGP bridge at 00:00:00
Aperture from AGP @ f8000000 old size 32 MB
Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000003ffb0000
 0000000000 - 003fe00000 page 2M
 003fe00000 - 003ffb0000 page 4k
kernel direct mapping tables up to 3ffb0000 @ 3ffad000-3ffb0000
RAMDISK: 37b3e000 - 37ff0000
ACPI: RSDP 00000000000f88c0 00014 (v00 ACPIAM)
ACPI: RSDT 000000003ffb0000 00030 (v01 A_M_I  OEMRSDT  07000716 MSFT 00000097)
ACPI: FACP 000000003ffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 000000003ffb03f0 03F83 (v01  K8UNF K8UNF233 00000233 INTL 02002026)
ACPI: FACS 000000003ffc0000 00040
ACPI: APIC 000000003ffb0390 0005C (v01 A_M_I  OEMAPIC  07000716 MSFT 00000097)
ACPI: OEMB 000000003ffc0040 00056 (v01 A_M_I  AMI_OEM  07000716 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000003ffb0000
Initmem setup node 0 0000000000000000-000000003ffb0000
  NODE_DATA [000000003ffa8000 - 000000003ffacfff]
 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffb0
On node 0 totalpages: 261951
  DMA zone: 56 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3922 pages, LIFO batch:0
  DMA32 zone: 3527 pages used for memmap
  DMA32 zone: 254441 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88003fc00000 s71616 r8192 d22592 u1048576
pcpu-alloc: s71616 r8192 d22592 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258363
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=linux root=LABEL=cauldron nokmsboot resume=UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8 splash=silent vga=785
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ f8000000 old size 32 MB
Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
Aperture from AGP @ f8000000 size 32 MB (APSIZE 0)
Node 0: aperture @ f8000000 size 64 MB
Memory: 1017024k/1048256k available (4188k kernel code, 452k absent, 30780k reserved, 5237k data, 728k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2210.856 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.71 BogoMIPS (lpj=2210856)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0000000000
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110413
ftrace: allocating 16570 entries in 65 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
MCE: In-kernel MCE decoding enabled.
Brought up 1 CPUs
Total of 1 processors activated (4421.71 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 3ffc0000 (196608 bytes)
Time: 17:25:09  Date: 07/16/11
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x40000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [ISAV] (on)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
pci 0000:00:00.0: [10de:00e1] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:01.0: [10de:00e0] type 0 class 0x000601
pci 0000:00:01.1: [10de:00e4] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io  0x5080-0x509f]
pci 0000:00:01.1: reg 20: [io  0x5000-0x503f]
pci 0000:00:01.1: reg 24: [io  0x5040-0x507f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: [10de:00e7] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:00e7] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfebfe000-0xfebfefff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:02.2: [10de:00e8] type 0 class 0x000c03
pci 0000:00:02.2: reg 10: [mem 0xfebfdc00-0xfebfdcff]
pci 0000:00:02.2: supports D1 D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:05.0: [10de:00df] type 0 class 0x000680
pci 0000:00:05.0: reg 10: [mem 0xfebfc000-0xfebfcfff]
pci 0000:00:05.0: reg 14: [io  0xec00-0xec07]
pci 0000:00:05.0: supports D1 D2
pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:08.0: [10de:00e5] type 0 class 0x000101
pci 0000:00:08.0: reg 20: [io  0xffa0-0xffaf]
pci 0000:00:0a.0: [10de:00e3] type 0 class 0x000101
pci 0000:00:0a.0: reg 10: [io  0x0f80-0x0f87]
pci 0000:00:0a.0: reg 14: [io  0x0f00-0x0f03]
pci 0000:00:0a.0: reg 18: [io  0x0e80-0x0e87]
pci 0000:00:0a.0: reg 1c: [io  0x0e00-0x0e03]
pci 0000:00:0a.0: reg 20: [io  0xe000-0xe00f]
pci 0000:00:0a.0: reg 24: [io  0xd800-0xd87f]
pci 0000:00:0b.0: [10de:00e2] type 1 class 0x000604
pci 0000:00:0e.0: [10de:00ed] type 1 class 0x000604
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: [10de:0311] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 01-01]
pci 0000:00:0b.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:0b.0:   bridge window [mem 0xfc800000-0xfe8fffff]
pci 0000:00:0b.0:   bridge window [mem 0xe4700000-0xf46fffff pref]
pci 0000:02:05.0: [104c:8024] type 0 class 0x000c00
pci 0000:02:05.0: reg 10: [mem 0xfeaff800-0xfeafffff]
pci 0000:02:05.0: reg 14: [mem 0xfeaf8000-0xfeafbfff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:05.0: PME# disabled
pci 0000:02:06.0: [1095:3512] type 0 class 0x000104
pci 0000:02:06.0: reg 10: [io  0xc880-0xc887]
pci 0000:02:06.0: reg 14: [io  0xc800-0xc803]
pci 0000:02:06.0: reg 18: [io  0xc480-0xc487]
pci 0000:02:06.0: reg 1c: [io  0xc400-0xc403]
pci 0000:02:06.0: reg 20: [io  0xc080-0xc08f]
pci 0000:02:06.0: reg 24: [mem 0xfeaff400-0xfeaff5ff]
pci 0000:02:06.0: reg 30: [mem 0xfea00000-0xfea7ffff pref]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:07.0: [1102:0004] type 0 class 0x000401
pci 0000:02:07.0: reg 10: [io  0xc000-0xc03f]
pci 0000:02:07.0: supports D1 D2
pci 0000:02:07.1: [1102:7003] type 0 class 0x000980
pci 0000:02:07.1: reg 10: [io  0xcc00-0xcc07]
pci 0000:02:07.1: supports D1 D2
pci 0000:02:07.2: [1102:4001] type 0 class 0x000c00
pci 0000:02:07.2: reg 10: [mem 0xfeafe800-0xfeafefff]
pci 0000:02:07.2: reg 14: [mem 0xfeaf4000-0xfeaf7fff]
pci 0000:02:07.2: supports D1 D2
pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:07.2: PME# disabled
pci 0000:00:0e.0: PCI bridge to [bus 02-02]
pci 0000:00:0e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0e.0:   bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:0e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: address space collision: [mem 0xf8000000-0xfbffffff pref] conflicts with GART [mem 0xf8000000-0xfbffffff]
reserve RAM buffer: 000000000009f400 - 000000000009ffff 
reserve RAM buffer: 000000003ffb0000 - 000000003fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x40000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x03f0-0x03f5]
pnp 00:05: [io  0x03f7]
pnp 00:05: [irq 6]
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: [io  0x0378-0x037f]
pnp 00:06: [io  0x0778-0x077f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x005f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x4000-0x407f]
pnp 00:07: [io  0x4080-0x40ff]
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x4000-0x407f] has been reserved
system 00:07: [io  0x4080-0x40ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfeefffff]
pnp 00:08: [mem 0xff7c0000-0xffffffff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:08: [mem 0xff7c0000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0060]
pnp 00:09: [io  0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0b: [io  0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0290-0x029f]
system 00:0c: [io  0x0290-0x029f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x3fffffff]
pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
pnp 00:0d: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
pnp 00:0d: disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:0b.0: PCI bridge to [bus 01-01]
pci 0000:00:0b.0:   bridge window [io  disabled]
pci 0000:00:0b.0:   bridge window [mem 0xfc800000-0xfe8fffff]
pci 0000:00:0b.0:   bridge window [mem 0xe4700000-0xf46fffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 02-02]
pci 0000:00:0e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0e.0:   bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:0e.0:   bridge window [mem pref disabled]
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xe4700000-0xf46fffff pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfeafffff]
NET: Registered protocol family 2
Switched to NOHz mode on CPU #0
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4808k freed
agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
audit: initializing netlink socket (disabled)
type=2000 audit(1310837109.216:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1995
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 640x480x16, linelength=1280, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe8000000, mapped to 0xffffc90000500000, using 1200k, total 131072k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=1097bb8c-3820-4b3a-b796-b417c9aa56d8
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 3:386:441
rtc_cmos 00:02: setting system clock to 2011-07-16 17:25:09 UTC (1310837109)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 728k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1936k freed
Freeing unused kernel memory: 104k freed
nash-hotplug (34): /proc/34/oom_adj is deprecated, please use /proc/34/oom_score_adj instead.
logips2pp: Detected unknown logitech mouse model 63
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.2: setting latency timer to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
ehci_hcd 0000:00:02.2: irq 22, io mem 0xfebfdc00
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfebff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.1: setting latency timer to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xfebfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.0-desktop-0.rc7.2.1.mga2 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
sata_sil 0000:02:06.0: version 2.4
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
sata_sil 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xfeaff400 tf 0xfeaff480 irq 19
ata2: SATA max UDMA/100 mmio m512@0xfeaff400 tf 0xfeaff4c0 irq 19
usb 1-3: new high speed USB device number 2 using ehci_hcd
input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-8: WDC WD10EAVS-32D7B1, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EAVS-32D 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-3: New USB device found, idVendor=0840, idProduct=00a1
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB 2.0 Mass Storage Device
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 00A10000000025152
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0a.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 22
ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 22
usb 3-2: new full speed USB device number 2 using ohci_hcd
usb 3-2: New USB device found, idVendor=041e, idProduct=4053
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-4: new low speed USB device number 2 using ohci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:08.0: version 0.4.1
pata_amd 0000:00:08.0: power state changed by ACPI to D0
pata_amd 0000:00:08.0: power state changed by ACPI to D0
pata_amd 0000:00:08.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
usb 2-4: New USB device found, idVendor=1ea7, idProduct=0002
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: 2.4GHZ Mouse
input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
generic-usb 0003:1EA7:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4GHZ Mouse] on usb-0000:00:02.0-4/input0
input: 2.4GHZ Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input3
generic-usb 0003:1EA7:0002.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4GHZ Mouse] on usb-0000:00:02.0-4/input1
ata6.00: ATAPI: ATAPI   CDRW 52X32, Y.BS, max UDMA/33
ata6.01: ATAPI: SONY    DVD RW DRU-700A, VY02, max UDMA/33
ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
ata6.00: configured for UDMA/33
ata6.01: configured for UDMA/33
scsi 5:0:0:0: CD-ROM            ATAPI    CDRW 52X32       Y.BS PQ: 0 ANSI: 5
scsi 5:0:1:0: CD-ROM            SONY     DVD RW DRU-700A  VY02 PQ: 0 ANSI: 5
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udevd[119]: starting version 172
EDAC MC: Ver: 2.1.0
Floppy drive(s): fd0 is 1.44M
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
FDC 0 is a post-1991 82077
wmi: Mapper loaded
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
powernow-k8: fid 0xe (2200 MHz), vid 0x2
powernow-k8: fid 0xc (2000 MHz), vid 0x6
powernow-k8: fid 0xa (1800 MHz), vid 0xa
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
nouveau 0000:01:00.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
[drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x031100a1)
checking generic (e8000000 8000000) vs hw (e8000000 8000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BMP BIOS found
[drm] nouveau 0000:01:00.0: BMP version 5.39
[drm] nouveau 0000:01:00.0: Bios version 04.31.20.52
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000003
[drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEC78
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEFD7
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF13A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF2AA
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF2C7
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2E4
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF4C1
[drm] nouveau 0000:01:00.0: Detected monitoring device: max6646
[drm] nouveau 0000:01:00.0: 2 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: memory 800MHz core 235MHz voltage 1220mV fanspeed 99%
[drm] nouveau 0000:01:00.0: 1: memory 800MHz core 400MHz voltage 1390mV fanspeed 100%
[drm] nouveau 0000:01:00.0: c: memory 501MHz core 234MHz voltage 1220mV
[TTM] Zone  kernel: Available graphics memory: 512300 kiB.
[TTM] Initializing pool allocator.
[drm] nouveau 0000:01:00.0: Detected 128MiB VRAM
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[drm] nouveau 0000:01:00.0: Load detected on output B
[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff880037b96c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 90x36
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
EXT4-fs (sdb5): re-mounted. Opts: acl
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl
Adding 4095468k swap on /dev/sda6.  Priority:-1 extents:1 across:4095468k

Actions: View

Attachments on bug 2167: 654 | 655 | 656 | 657