Attachment 5056 Details for Bug 12843 – results of the command iw list

results of the command iw list

iw_list_txt.txt (text/plain), 4.75 KB, created by Jose Nunez on 2014-03-15 17:19:27 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Jose Nunez

Created: 2014-03-15 17:19:27 CET

Size: 4.75 KB

patch

obsolete

>ï»¿[root@localhost ~]# iw list
>Wiphy phy1
>        max # scan SSIDs: 4
>        max scan IEs length: 2285 bytes
>        Coverage class: 0 (up to 0m)
>        Device supports RSN-IBSS.
>        Supported Ciphers:
>                * WEP40 (00-0f-ac:1)
>                * WEP104 (00-0f-ac:5)
>                * TKIP (00-0f-ac:2)
>                * CCMP (00-0f-ac:4)
>        Available Antennas: TX 0 RX 0
>        Supported interface modes:
>                 * IBSS
>                 * managed
>                 * AP
>                 * AP/VLAN
>                 * WDS
>                 * monitor
>                 * mesh point
>        Band 1:
>                Bitrates (non-HT):
>                        * 1.0 Mbps
>                        * 2.0 Mbps (short preamble supported)
>                        * 5.5 Mbps (short preamble supported)
>                        * 11.0 Mbps (short preamble supported)
>                        * 6.0 Mbps
>                        * 9.0 Mbps
>                        * 12.0 Mbps
>                        * 18.0 Mbps
>                        * 24.0 Mbps
>                        * 36.0 Mbps
>                        * 48.0 Mbps
>                        * 54.0 Mbps
>                Frequencies:
>                        * 2412 MHz [1] (20.0 dBm)
>                        * 2417 MHz [2] (20.0 dBm)
>                        * 2422 MHz [3] (20.0 dBm)
>                        * 2427 MHz [4] (20.0 dBm)
>                        * 2432 MHz [5] (20.0 dBm)
>                        * 2437 MHz [6] (20.0 dBm)
>                        * 2442 MHz [7] (20.0 dBm)
>                        * 2447 MHz [8] (20.0 dBm)
>                        * 2452 MHz [9] (20.0 dBm)
>                        * 2457 MHz [10] (20.0 dBm)
>                        * 2462 MHz [11] (20.0 dBm)
>                        * 2467 MHz [12] (20.0 dBm)
>                        * 2472 MHz [13] (20.0 dBm)
>                        * 2484 MHz [14] (disabled)
>        Supported commands:
>                 * new_interface
>                 * set_interface
>                 * new_key
>                 * start_ap
>                 * new_station
>                 * new_mpath
>                 * set_mesh_config
>                 * set_bss
>                 * authenticate
>                 * associate
>                 * deauthenticate
>                 * disassociate
>                 * join_ibss
>                 * join_mesh
>                 * set_tx_bitrate_mask
>                 * frame
>                 * frame_wait_cancel
>                 * set_wiphy_netns
>                 * set_channel
>                 * set_wds_peer
>                 * probe_client
>                 * set_noack_map
>                 * register_beacons
>                 * start_p2p_device
>                 * set_mcast_rate
>                 * connect
>                 * disconnect
>        Supported TX frame types:
>                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>        Supported RX frame types:
>                 * IBSS: 0x40 0xb0 0xc0 0xd0
>                 * managed: 0x40 0xd0
>                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * mesh point: 0xb0 0xc0 0xd0
>                 * P2P-client: 0x40 0xd0
>                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>                 * P2P-device: 0x40 0xd0
>        software interface modes (can always be added):
>                 * AP/VLAN
>                 * monitor
>        valid interface combinations:
>                 * #{ AP, mesh point } <= 4,
>                   total <= 4, #channels <= 1
>        HT Capability overrides:
>                 * MCS: ff ff ff ff ff ff ff ff ff ff
>                 * maximum A-MSDU length
>                 * supported channel width
>                 * short GI for 40 MHz
>                 * max A-MPDU length exponent
>                 * min MPDU start spacing
>        Device supports TX status socket option.
>        Device supports HT-IBSS.
>        Device supports low priority scan.
>        Device supports scan flush.
>        Device supports AP scan.
>[root@localhost ~]#

ï»¿[root@localhost ~]# iw list
Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2285 bytes
        Coverage class: 0 (up to 0m)
        Device supports RSN-IBSS.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP (00-0f-ac:4)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * WDS
                 * monitor
                 * mesh point
        Band 1:
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps (short preamble supported)
                        * 5.5 Mbps (short preamble supported)
                        * 11.0 Mbps (short preamble supported)
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * new_mpath
                 * set_mesh_config
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * join_ibss
                 * join_mesh
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * set_wds_peer
                 * probe_client
                 * set_noack_map
                 * register_beacons
                 * start_p2p_device
                 * set_mcast_rate
                 * connect
                 * disconnect
        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * IBSS: 0x40 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
                 * AP/VLAN
                 * monitor
        valid interface combinations:
                 * #{ AP, mesh point } <= 4,
                   total <= 4, #channels <= 1
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Device supports TX status socket option.
        Device supports HT-IBSS.
        Device supports low priority scan.
        Device supports scan flush.
        Device supports AP scan.
[root@localhost ~]#

Actions: View

Attachments on bug 12843: 5009 | 5010 | 5055 | 5056 | 5104