Attachment 499 Details for Bug 1504 – smartctl --all -d sat /dev/sdb >/tmp/smartctl.out

smartctl --all -d sat /dev/sdb >/tmp/smartctl.out

smartctl.out (text/plain), 4.69 KB, created by Herbert Poetzl on 2011-05-31 18:55:29 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Herbert Poetzl

Created: 2011-05-31 18:55:29 CEST

Size: 4.69 KB

patch

obsolete

>smartctl 5.40 2010-10-16 r3189 [x86_64-mageia-linux-gnu] (local build)
>Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
>
>=== START OF INFORMATION SECTION ===
>Model Family:     SandForce Driven SSDs
>Device Model:     OCZ-AGILITY2
>Serial Number:    OCZ-3L98TYHA25F7W62O
>Firmware Version: 1.11
>User Capacity:    120,034,123,776 bytes
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   8
>ATA Standard is:  ATA-8-ACS revision 6
>Local Time is:    Tue May 31 18:53:36 2011 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x00)	Offline data collection activity
>					was never started.
>					Auto Offline Data Collection: Disabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		 (   0) seconds.
>Offline data collection
>capabilities: 			 (0x7f) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Abort Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  48) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   2) minutes.
>SCT capabilities: 	       (0x003d)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   120   120   050    Pre-fail  Always       -       0/0
>  5 Retired_Block_Count     0x0033   097   097   003    Pre-fail  Always       -       576
>  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       47h+50m+24.830s
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       17
>171 Program_Fail_Count      0x0000   000   000   000    Old_age   Offline      -       0
>172 Erase_Fail_Count        0x0000   000   000   000    Old_age   Offline      -       0
>174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       9
>177 Wear_Range_Delta        0x0000   000   000   ---    Old_age   Offline      -       0
>181 Program_Fail_Count      0x0000   000   000   000    Old_age   Offline      -       0
>182 Erase_Fail_Count        0x0000   000   000   000    Old_age   Offline      -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>194 Temperature_Celsius     0x0022   000   000   000    Old_age   Always       -       0
>195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/0
>196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
>231 SSD_Life_Left           0x0013   095   095   010    Pre-fail  Always       -       1
>233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       0
>234 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       0
>241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       0
>242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       0
>
>Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
>SMART Error Log Version: 39
>No Errors Logged
>
>Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
>SMART Self-test log structure revision number 41471
>Warning: ATA Specification requires self-test log structure revision number = 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

smartctl 5.40 2010-10-16 r3189 [x86_64-mageia-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OCZ-AGILITY2
Serial Number:    OCZ-3L98TYHA25F7W62O
Firmware Version: 1.11
User Capacity:    120,034,123,776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Tue May 31 18:53:36 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (   0) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   120   050    Pre-fail  Always       -       0/0
  5 Retired_Block_Count     0x0033   097   097   003    Pre-fail  Always       -       576
  9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       47h+50m+24.830s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       17
171 Program_Fail_Count      0x0000   000   000   000    Old_age   Offline      -       0
172 Erase_Fail_Count        0x0000   000   000   000    Old_age   Offline      -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       9
177 Wear_Range_Delta        0x0000   000   000   ---    Old_age   Offline      -       0
181 Program_Fail_Count      0x0000   000   000   000    Old_age   Offline      -       0
182 Erase_Fail_Count        0x0000   000   000   000    Old_age   Offline      -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   000   000   000    Old_age   Always       -       0
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/0
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
231 SSD_Life_Left           0x0013   095   095   010    Pre-fail  Always       -       1
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       0
234 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       0
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       0
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       0

Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 39
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 41471
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Actions: View

Attachments on bug 1504: 499