Attachment 272 Details for Bug 904 – requested dmesg output

requested dmesg output

dmesage.txt (text/plain), 41.23 KB, created by Peter D on 2011-04-22 06:38:05 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Peter D

Created: 2011-04-22 06:38:05 CEST

Size: 41.23 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.3-desktop-1.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sat Apr 16 16:31:42 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI 2.4 present.
>DMI: Gigabyte Technology Co., Ltd. GA-MA770-DS3P/GA-MA770-S3P, BIOS F5 03/17/2009
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7fee0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 007FF00000 mask FFFFF00000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [c00f54a0] f54a0
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ bfa000-c00000
>RAMDISK: 37c02000 - 37ff0000
>Allocated new RAMDISK: 37010000 - 373fddbd
>Move RAMDISK from 0000000037c02000 - 0000000037fefdbc to 37010000 - 373fddbc
>ACPI: RSDP 000f6e90 00014 (v00 GBT   )
>ACPI: RSDT 7fee3000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 7fee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 7fee30c0 05E2B (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 7fee0000 00040
>ACPI: SSDT 7fee8fc0 001C4 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 7fee91c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 7fee9200 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: TAMG 7fee9240 002AA (v01 GBT    GBT   B0 5455312E BG?? 48240101)
>ACPI: APIC 7fee8f00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>1162MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0007fee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fee0
>On node 0 totalpages: 523887
>free_area_init_node: node 0, pgdat c069d200, node_mem_map f600f200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 2326 pages used for memmap
>  HighMem zone: 295372 pages, LIFO batch:31
>Using APIC driver default
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 12 pages/cpu @f5c00000 s27904 r0 d21248 u1048576
>pcpu-alloc: s27904 r0 d21248 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
>Kernel command line: BOOT_IMAGE=linux root=LABEL=test nokmsboot resume=UUID=a4d7e533-116b-4b7f-beff-845e2bcc7033 splash=silent vga=788
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>allocated 10479680 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:0007fee0)
>Memory: 2056844k/2096000k available (3554k kernel code, 38704k reserved, 2233k data, 552k init, 1190792k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc06a7000 - 0xc0731000   ( 552 kB)
>      .data : 0xc047884d - 0xc06a7000   (2233 kB)
>      .text : 0xc0100000 - 0xc047884d   (3554 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>CPU 0 irqstacks, hard=f4c20000 soft=f4c22000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2009.109 MHz processor.
>Marking TSC unstable due to TSCs unsynchronized
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.21 BogoMIPS (lpj=2009109)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110112
>ftrace: allocating 15942 entries in 32 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>MCE: In-kernel MCE decoding enabled.
>CPU 1 irqstacks, hard=f4cb4000 soft=f4cb6000
>Booting Node   0, Processors  #1
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (8036.53 BogoMIPS).
>devtmpfs: initialized
>Time: 17:47:59  Date: 04/21/11
>NET: Registered protocol family 16
>node 0 link 0: io port [b000, ffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e04fffff]
>bus: [00, 04] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0x80000000-0xefffffff]
>bus: 00 index 3 [mem 0xf0000000-0xffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
>pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:05.0: [1002:597b] type 1 class 0x000604
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:11.0: set SATA to AHCI mode
>pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
>pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
>pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
>pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
>pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
>pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
>pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
>pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
>pci 0000:02:00.0: [14f1:8852] type 0 class 0x000400
>pci 0000:02:00.0: reg 10: [mem 0xfda00000-0xfdbfffff 64bit]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:05.0: PCI bridge to [bus 02-02]
>pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdbfffff]
>pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:03:00.0: reg 10: [io  0xce00-0xceff]
>pci 0000:03:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
>pci 0000:03:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
>pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:03:00.0: supports D1 D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:0a.0: PCI bridge to [bus 03-03]
>pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
>pci 0000:04:06.0: [14f1:8800] type 0 class 0x000400
>pci 0000:04:06.0: reg 10: [mem 0xf9000000-0xf9ffffff]
>pci 0000:04:06.2: [14f1:8802] type 0 class 0x000480
>pci 0000:04:06.2: reg 10: [mem 0xf8000000-0xf8ffffff]
>pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfaffffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000007fee0000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0x80000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0220-0x0225]
>pnp 00:01: [io  0x0290-0x0294]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x4100-0x411f]
>pnp 00:02: [io  0x0228-0x022f]
>pnp 00:02: [io  0x0238-0x023f]
>pnp 00:02: [io  0x040b]
>pnp 00:02: [io  0x04d6]
>pnp 00:02: [io  0x0c00-0x0c01]
>pnp 00:02: [io  0x0c14]
>pnp 00:02: [io  0x0c50-0x0c52]
>pnp 00:02: [io  0x0c6c-0x0c6d]
>pnp 00:02: [io  0x0c6f]
>pnp 00:02: [io  0x0cd0-0x0cd1]
>pnp 00:02: [io  0x0cd2-0x0cd3]
>pnp 00:02: [io  0x0cd4-0x0cdf]
>pnp 00:02: [io  0x4000-0x40fe]
>pnp 00:02: [io  0x4210-0x4217]
>pnp 00:02: [io  0x0b00-0x0b0f]
>pnp 00:02: [io  0x0b10-0x0b1f]
>pnp 00:02: [io  0x0b20-0x0b3f]
>pnp 00:02: [mem 0x00000000-0x00000fff window]
>pnp 00:02: [mem 0xfee00400-0xfee00fff window]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x0238-0x023f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfed00000-0xfed003ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x0070-0x0073]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [io  0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [io  0x03f0-0x03f5]
>pnp 00:08: [io  0x03f7]
>pnp 00:08: [irq 6]
>pnp 00:08: [dma 2]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:09: [irq 12]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 1]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:0b: [mem 0xe0000000-0xefffffff]
>system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0x000ce400-0x000cffff]
>pnp 00:0c: [mem 0x000f0000-0x000f7fff]
>pnp 00:0c: [mem 0x000f8000-0x000fbfff]
>pnp 00:0c: [mem 0x000fc000-0x000fffff]
>pnp 00:0c: [mem 0x7fee0000-0x7fefffff]
>pnp 00:0c: [mem 0xffff0000-0xffffffff]
>pnp 00:0c: [mem 0x00000000-0x0009ffff]
>pnp 00:0c: [mem 0x00100000-0x7fedffff]
>pnp 00:0c: [mem 0xfec00000-0xfec00fff]
>pnp 00:0c: [mem 0xfee00000-0xfee00fff]
>pnp 00:0c: [mem 0xfff80000-0xfffeffff]
>pnp 00:0c: disabling [mem 0x000ce400-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0c: disabling [mem 0x00100000-0x7fedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>system 00:0c: [mem 0x7fee0000-0x7fefffff] could not be reserved
>system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
>pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
>pci 0000:00:05.0: PCI bridge to [bus 02-02]
>pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdbfffff]
>pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci 0000:03:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
>pci 0000:00:0a.0: PCI bridge to [bus 03-03]
>pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 04-04]
>pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfaffffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
>pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdbfffff]
>pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfaffffff]
>pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:04: resource 8 [mem 0x80000000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 4 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4024k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1303408079.480:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1699
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:02.0: setting latency timer to 64
>pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:05.0: setting latency timer to 64
>pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
>pcieport 0000:00:0a.0: setting latency timer to 64
>pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
>vesafb: framebuffer at 0xcf000000, mapped to 0xf7c80000, using 1875k, total 14336k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:ca70
>vesafb: pmi: set display start = c00ccad3, set palette = c00ccb2e
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>isapnp: Scanning for PnP cards...
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>PM: Checking hibernation image partition UUID=a4d7e533-116b-4b7f-beff-845e2bcc7033
>psmouse serio1: ID: 10 00 64
>input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 7:604:795
>rtc_cmos 00:05: setting system clock to 2011-04-21 17:48:01 UTC (1303408081)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 552k freed
>nash-hotplug (42): /proc/42/oom_adj is deprecated, please use /proc/42/oom_score_adj instead.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>ata2.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.19, max UDMA/66
>ata2.01: HPA detected: current 1953523055, native 1953525168
>ata2.01: ATA-8: ST31000528AS, CC38, max UDMA/133
>ata2.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/66
>ata2.01: configured for UDMA/100
>ata1.01: ATAPI: TSSTcorp CD-ROM SH-C522C, TS03, max UDMA/33
>ata1.01: configured for UDMA/33
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD-ROM  SH-C522C TS03 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215  1.19 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 1:0:1:0: [sda] Write Protect is off
>sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda4
>sd 1:0:1:0: [sda] Attached SCSI disk
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>udev[126]: starting version 166
>SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
>SP5100 TCO timer: mmio address 0xfec000f0 already in use
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>Floppy drive(s): fd0 is 1.44M
>ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>ACPI: acpi_idle registered with cpuidle
>FDC 0 is a post-1991 82077
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>wmi: Mapper loaded
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>sr 0:0:1:0: Attached scsi generic sg0 type 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:0:0: Attached scsi CD-ROM sr1
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
>usb usb1: SerialNumber: 0000:00:12.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>Linux video capture interface: v2.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
>usb usb2: SerialNumber: 0000:00:12.1
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.3-desktop-1.mga ehci_hcd
>usb usb3: SerialNumber: 0000:00:12.2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:03:00.0: setting latency timer to 64
>r8169 0000:03:00.0: irq 43 for MSI/MSI-X
>r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf866a000, 00:1f:d0:b9:6f:13, XID 1c4000c0 IRQ 43
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38.3-desktop-1.mga ehci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>cx23885 driver version 0.0.2 loaded
>cx23885 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.1
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>IR NEC protocol handler initialized
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: OHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
>usb usb7: SerialNumber: 0000:00:14.5
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>IR RC5(x) protocol handler initialized
>IR RC6 protocol handler initialized
>IR JVC protocol handler initialized
>cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
>cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected], frontend(s): 1
>cx88[0]: TV tuner type 4, Radio tuner type -1
>IR Sony protocol handler initialized
>Registered IR keymap rc-fusionhdtv-mce
>input: i2c IR (FusionHDTV) as /devices/virtual/rc/rc0/input4
>rc0: i2c IR (FusionHDTV) as /devices/virtual/rc/rc0
>ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx23885[0]]
>cx23885_dvb_register() allocating 1 frontend(s)
>cx23885[0]: cx23885 based dvb card
>lirc_dev: IR Remote Control driver registered, major 252 
>cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
>IR LIRC bridge handler initialized
>Registered IR keymap rc-dntv-live-dvb-t
>input: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:14.4/0000:04:06.2/rc/rc1/input5
>rc1: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:14.4/0000:04:06.2/rc/rc1
>cx88[0]/2: cx2388x 8802 Driver Manager
>cx88-mpeg driver manager 0000:04:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>cx88[0]/2: found at 0000:04:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xf8000000
>cx8800 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xf9000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88/2: cx2388x dvb driver version 0.0.8 loaded
>cx88/2: registering cx8802 driver, type: dvb access: shared
>cx88[0]/2: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14]
>cx88[0]/2: cx2388x based DVB/ATSC card
>cx8802_alloc_frontends() allocating 1 frontend(s)
>xc2028 0-0061: creating new instance
>xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
>DVB: registering new adapter (cx23885[0])
>DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
>cx23885_dvb_register() allocating 1 frontend(s)
>cx23885[0]: cx23885 based dvb card
>xc2028 1-0061: creating new instance
>xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
>DVB: registering new adapter (cx23885[0])
>DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)...
>cx23885_dev_checkrevision() Hardware revision = 0xa5
>cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfda00000
>cx23885 0000:02:00.0: setting latency timer to 64
>cx23885 0000:02:00.0: irq 44 for MSI/MSI-X
>DVB: registering new adapter (cx88[0])
>DVB: registering adapter 2 frontend 0 (Zarlink MT352 DVB-T)...
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>hda_intel: position_fix set to 1 for device 1458:a022
>hda_codec: ALC888: BIOS auto-probing.
>SKU: Nid=0x0 sku_cfg=0x0000e601
>SKU: port_connectivity=0x0
>SKU: enable_pcbeep=0x1
>SKU: check_sum=0x00000000
>SKU: customization=0x00000000
>SKU: external_amp=0x0
>SKU: platform_type=0x0
>SKU: swap=0x0
>SKU: override=0x1
>autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x1e/0x0
>   inputs:
>   dig-in=0x1f
>realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
>input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
>HDA Intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>hda_intel: Disable MSI for Nvidia chipset
>HDA Intel 0000:01:00.1: setting latency timer to 64
>nvidia: module license 'NVIDIA' taints kernel.
>Disabling lock debugging due to kernel taint
>nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>nvidia 0000:01:00.0: setting latency timer to 64
>vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>NVRM: loading NVIDIA UNIX x86 Kernel Module  270.41.06  Mon Apr 18 14:54:25 PDT 2011
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>EXT4-fs (sda10): re-mounted. Opts: acl
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>loop: module loaded
>Adding 10233368k swap on /dev/sda9.  Priority:-1 extents:1 across:10233368k 
>NET: Registered protocol family 10
>r8169 0000:03:00.0: eth0: link down
>r8169 0000:03:00.0: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>r8169 0000:03:00.0: eth0: link up
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>martian source 255.255.255.255 from 192.168.1.254, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:04:ed:a8:fe:dc:08:00
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
>ip_set version 4 loaded
>ctnetlink v0.93: registering with nfnetlink.
>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
>xt_time: kernel timezone is +1000
>u32 classifier
>    Actions configured
>eth0: no IPv6 routers present

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.3-desktop-1.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sat Apr 16 16:31:42 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
 BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
 BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
 BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA770-DS3P/GA-MA770-S3P, BIOS F5 03/17/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7fee0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 007FF00000 mask FFFFF00000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f54a0] f54a0
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000373fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037000000 page 2M
 0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ bfa000-c00000
RAMDISK: 37c02000 - 37ff0000
Allocated new RAMDISK: 37010000 - 373fddbd
Move RAMDISK from 0000000037c02000 - 0000000037fefdbc to 37010000 - 373fddbc
ACPI: RSDP 000f6e90 00014 (v00 GBT   )
ACPI: RSDT 7fee3000 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 7fee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 7fee30c0 05E2B (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 7fee0000 00040
ACPI: SSDT 7fee8fc0 001C4 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 7fee91c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 7fee9200 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 7fee9240 002AA (v01 GBT    GBT   B0 5455312E BG?? 48240101)
ACPI: APIC 7fee8f00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
1162MB HIGHMEM available.
883MB LOWMEM available.
  mapped low ram: 0 - 373fe000
  low ram: 0 - 373fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000373fe
  HighMem  0x000373fe -> 0x0007fee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fee0
On node 0 totalpages: 523887
free_area_init_node: node 0, pgdat c069d200, node_mem_map f600f200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1736 pages used for memmap
  Normal zone: 220470 pages, LIFO batch:31
  HighMem zone: 2326 pages used for memmap
  HighMem zone: 295372 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5c00000 s27904 r0 d21248 u1048576
pcpu-alloc: s27904 r0 d21248 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
Kernel command line: BOOT_IMAGE=linux root=LABEL=test nokmsboot resume=UUID=a4d7e533-116b-4b7f-beff-845e2bcc7033 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10479680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0007fee0)
Memory: 2056844k/2096000k available (3554k kernel code, 38704k reserved, 2233k data, 552k init, 1190792k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc06a7000 - 0xc0731000   ( 552 kB)
      .data : 0xc047884d - 0xc06a7000   (2233 kB)
      .text : 0xc0100000 - 0xc047884d   (3554 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f4c20000 soft=f4c22000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2009.109 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.21 BogoMIPS (lpj=2009109)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 15942 entries in 32 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
MCE: In-kernel MCE decoding enabled.
CPU 1 irqstacks, hard=f4cb4000 soft=f4cb6000
Booting Node   0, Processors  #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (8036.53 BogoMIPS).
devtmpfs: initialized
Time: 17:47:59  Date: 04/21/11
NET: Registered protocol family 16
node 0 link 0: io port [b000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e04fffff]
bus: [00, 04] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x80000000-0xefffffff]
bus: 00 index 3 [mem 0xf0000000-0xffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:05.0: [1002:597b] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [14f1:8852] type 0 class 0x000400
pci 0000:02:00.0: reg 10: [mem 0xfda00000-0xfdbfffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io  0xce00-0xceff]
pci 0000:03:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:04:06.0: [14f1:8800] type 0 class 0x000400
pci 0000:04:06.0: reg 10: [mem 0xf9000000-0xf9ffffff]
pci 0000:04:06.2: [14f1:8802] type 0 class 0x000480
pci 0000:04:06.2: reg 10: [mem 0xf8000000-0xf8ffffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfaffffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000007fee0000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0220-0x0225]
pnp 00:01: [io  0x0290-0x0294]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x4100-0x411f]
pnp 00:02: [io  0x0228-0x022f]
pnp 00:02: [io  0x0238-0x023f]
pnp 00:02: [io  0x040b]
pnp 00:02: [io  0x04d6]
pnp 00:02: [io  0x0c00-0x0c01]
pnp 00:02: [io  0x0c14]
pnp 00:02: [io  0x0c50-0x0c52]
pnp 00:02: [io  0x0c6c-0x0c6d]
pnp 00:02: [io  0x0c6f]
pnp 00:02: [io  0x0cd0-0x0cd1]
pnp 00:02: [io  0x0cd2-0x0cd3]
pnp 00:02: [io  0x0cd4-0x0cdf]
pnp 00:02: [io  0x4000-0x40fe]
pnp 00:02: [io  0x4210-0x4217]
pnp 00:02: [io  0x0b00-0x0b0f]
pnp 00:02: [io  0x0b10-0x0b1f]
pnp 00:02: [io  0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:02: [io  0x4100-0x411f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x0238-0x023f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x4000-0x40fe] has been reserved
system 00:02: [io  0x4210-0x4217] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x03f0-0x03f5]
pnp 00:08: [io  0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x000ce400-0x000cffff]
pnp 00:0c: [mem 0x000f0000-0x000f7fff]
pnp 00:0c: [mem 0x000f8000-0x000fbfff]
pnp 00:0c: [mem 0x000fc000-0x000fffff]
pnp 00:0c: [mem 0x7fee0000-0x7fefffff]
pnp 00:0c: [mem 0xffff0000-0xffffffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x7fedffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: [mem 0xfff80000-0xfffeffff]
pnp 00:0c: disabling [mem 0x000ce400-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: disabling [mem 0x00100000-0x7fedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0c: [mem 0x7fee0000-0x7fefffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
pci 0000:01:00.0: BAR 6: assigned [mem 0xc0000000-0xc007ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xb0000000-0xcfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfaffffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdbfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfaffffff]
pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4024k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1303408079.480:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1699
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
vesafb: framebuffer at 0xcf000000, mapped to 0xf7c80000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:ca70
vesafb: pmi: set display start = c00ccad3, set palette = c00ccb2e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
isapnp: Scanning for PnP cards...
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=a4d7e533-116b-4b7f-beff-845e2bcc7033
psmouse serio1: ID: 10 00 64
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 7:604:795
rtc_cmos 00:05: setting system clock to 2011-04-21 17:48:01 UTC (1303408081)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 552k freed
nash-hotplug (42): /proc/42/oom_adj is deprecated, please use /proc/42/oom_score_adj instead.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ata2.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.19, max UDMA/66
ata2.01: HPA detected: current 1953523055, native 1953525168
ata2.01: ATA-8: ST31000528AS, CC38, max UDMA/133
ata2.01: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/100
ata1.01: ATAPI: TSSTcorp CD-ROM SH-C522C, TS03, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM            TSSTcorp CD-ROM  SH-C522C TS03 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215  1.19 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
sd 1:0:1:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:1:0: [sda] Write Protect is off
sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda4
sd 1:0:1:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
udev[126]: starting version 166
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Floppy drive(s): fd0 is 1.44M
ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: acpi_idle registered with cpuidle
FDC 0 is a post-1991 82077
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
wmi: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
sr 0:0:1:0: Attached scsi generic sg0 type 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sd 1:0:1:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
Linux video capture interface: v2.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
usb usb2: SerialNumber: 0000:00:12.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.3-desktop-1.mga ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf866a000, 00:1f:d0:b9:6f:13, XID 1c4000c0 IRQ 43
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.3-desktop-1.mga ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
IR NEC protocol handler initialized
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.38.3-desktop-1.mga ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type -1
IR Sony protocol handler initialized
Registered IR keymap rc-fusionhdtv-mce
input: i2c IR (FusionHDTV) as /devices/virtual/rc/rc0/input4
rc0: i2c IR (FusionHDTV) as /devices/virtual/rc/rc0
ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx23885[0]]
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
lirc_dev: IR Remote Control driver registered, major 252 
cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
IR LIRC bridge handler initialized
Registered IR keymap rc-dntv-live-dvb-t
input: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:14.4/0000:04:06.2/rc/rc1/input5
rc1: cx88 IR (KWorld/VStream XPert D as /devices/pci0000:00/0000:00:14.4/0000:04:06.2/rc/rc1
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:04:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx88[0]/2: found at 0000:04:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xf8000000
cx8800 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xf9000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x dvb driver version 0.0.8 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
xc2028 0-0061: creating new instance
xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)...
cx23885_dev_checkrevision() Hardware revision = 0xa5
cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfda00000
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 44 for MSI/MSI-X
DVB: registering new adapter (cx88[0])
DVB: registering adapter 2 frontend 0 (Zarlink MT352 DVB-T)...
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda_intel: position_fix set to 1 for device 1458:a022
hda_codec: ALC888: BIOS auto-probing.
SKU: Nid=0x0 sku_cfg=0x0000e601
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
   dig-in=0x1f
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
HDA Intel 0000:01:00.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  270.41.06  Mon Apr 18 14:54:25 PDT 2011
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
EXT4-fs (sda10): re-mounted. Opts: acl
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
loop: module loaded
Adding 10233368k swap on /dev/sda9.  Priority:-1 extents:1 across:10233368k 
NET: Registered protocol family 10
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
martian source 255.255.255.255 from 192.168.1.254, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:04:ed:a8:fe:dc:08:00
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set version 4 loaded
ctnetlink v0.93: registering with nfnetlink.
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +1000
u32 classifier
    Actions configured
eth0: no IPv6 routers present

Actions: View

Attachments on bug 904: 261 | 262 | 263 | 264 | 272 | 273 | 292 | 304 | 305 | 306 | 307 | 308 | 309