Attachment 2172 Details for Bug 4905 – dmesg

dmesg

dmesg.txt (text/plain), 71.73 KB, created by Andy Liebman on 2012-05-03 23:38:47 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Andy Liebman

Created: 2012-05-03 23:38:47 CEST

Size: 71.73 KB

patch

obsolete

>Linux version 2.6.31.5-desktop-1mnb (herton@celeste.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 00:05:22 EDT 2009
>Command line: initrd=alt0/all.rdz automatic=method:cdrom rescue BOOT_IMAGE=alt0/vmlinuz automatic=method:cdrom
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007e4c4000 (usable)
> BIOS-e820: 000000007e4c4000 - 000000007e5e4000 (ACPI NVS)
> BIOS-e820: 000000007e5e4000 - 000000007f1e4000 (reserved)
> BIOS-e820: 000000007f1e4000 - 000000007f260000 (ACPI data)
> BIOS-e820: 000000007f260000 - 000000007f2f9000 (reserved)
> BIOS-e820: 000000007f2f9000 - 000000007f300000 (ACPI NVS)
> BIOS-e820: 000000007f300000 - 000000007f334000 (reserved)
> BIOS-e820: 000000007f334000 - 000000007f33c000 (ACPI NVS)
> BIOS-e820: 000000007f33c000 - 000000007f365000 (reserved)
> BIOS-e820: 000000007f365000 - 000000007f800000 (ACPI NVS)
> BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
>DMI 2.7 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x880000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000000 mask 3FF800000000 write-back
>  1 base 000800000000 mask 3FFF80000000 write-back
>  2 base 000080000000 mask 3FFF80000000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0x7e4c4 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-000000007e4c4000
> 0000000000 - 0040000000 page 1G
> 0040000000 - 007e400000 page 2M
> 007e400000 - 007e4c4000 page 4k
>kernel direct mapping tables up to 7e4c4000 @ 10000-13000
>init_memory_mapping: 0000000100000000-0000000880000000
> 0100000000 - 0880000000 page 1G
>kernel direct mapping tables up to 880000000 @ 12000-13000
>RAMDISK: 7d304000 - 7e4a2b6e
>ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
>ACPI: XSDT 000000007f1e4088 00094 (v01 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: FACP 000000007f1ee938 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: DSDT 000000007f1e41b0 0A788 (v02 ALASKA    A M I 00000015 INTL 20051117)
>ACPI: FACS 000000007f339f80 00040
>ACPI: APIC 000000007f1eea30 00224 (v03 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: SRAT 000000007f1eec58 004B0 (v01 A M I  AMI SRAT 00000001 AMI. 00000000)
>ACPI: SLIT 000000007f1ef108 00030 (v01 A M I  AMI SLIT 00000000 AMI. 00000000)
>ACPI: HPET 000000007f1ef138 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
>ACPI: SPMI 000000007f1ef170 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
>ACPI: SSDT 000000007f1ef1b0 70104 (v02  INTEL    CpuPm 00004000 INTL 20051117)
>ACPI: BGRT 000000007f25f2b8 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: MCFG 000000007f25f2f0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
>ACPI: DMAR 000000007f25f330 00170 (v01 A M I   OEMDMAR 00000001 INTL 00000001)
>ACPI: EINJ 000000007f25f4a0 00130 (v01    AMI AMI EINJ 00000000      00000000)
>ACPI: ERST 000000007f25f5d0 00210 (v01  AMIER AMI ERST 00000000      00000000)
>ACPI: HEST 000000007f25f7e0 000A8 (v01    AMI AMI HEST 00000000      00000000)
>ACPI: BERT 000000007f25f888 00030 (v01    AMI AMI BERT 00000000      00000000)
>ACPI: Local APIC address 0xfee00000
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 0 -> APIC 2 -> Node 0
>SRAT: PXM 0 -> APIC 3 -> Node 0
>SRAT: PXM 0 -> APIC 4 -> Node 0
>SRAT: PXM 0 -> APIC 5 -> Node 0
>SRAT: PXM 0 -> APIC 6 -> Node 0
>SRAT: PXM 0 -> APIC 7 -> Node 0
>SRAT: PXM 0 -> APIC 8 -> Node 0
>SRAT: PXM 0 -> APIC 9 -> Node 0
>SRAT: PXM 0 -> APIC 10 -> Node 0
>SRAT: PXM 0 -> APIC 11 -> Node 0
>SRAT: PXM 0 -> APIC 12 -> Node 0
>SRAT: PXM 0 -> APIC 13 -> Node 0
>SRAT: PXM 0 -> APIC 14 -> Node 0
>SRAT: PXM 0 -> APIC 15 -> Node 0
>SRAT: PXM 1 -> APIC 32 -> Node 1
>SRAT: PXM 1 -> APIC 33 -> Node 1
>SRAT: PXM 1 -> APIC 34 -> Node 1
>SRAT: PXM 1 -> APIC 35 -> Node 1
>SRAT: PXM 1 -> APIC 36 -> Node 1
>SRAT: PXM 1 -> APIC 37 -> Node 1
>SRAT: PXM 1 -> APIC 38 -> Node 1
>SRAT: PXM 1 -> APIC 39 -> Node 1
>SRAT: PXM 1 -> APIC 40 -> Node 1
>SRAT: PXM 1 -> APIC 41 -> Node 1
>SRAT: PXM 1 -> APIC 42 -> Node 1
>SRAT: PXM 1 -> APIC 43 -> Node 1
>SRAT: PXM 1 -> APIC 44 -> Node 1
>SRAT: PXM 1 -> APIC 45 -> Node 1
>SRAT: PXM 1 -> APIC 46 -> Node 1
>SRAT: PXM 1 -> APIC 47 -> Node 1
>SRAT: Node 0 PXM 0 0-80000000
>SRAT: Node 0 PXM 0 100000000-480000000
>SRAT: Node 1 PXM 1 480000000-880000000
>NUMA: Using 31 for the hash shift.
>Bootmem setup node 0 0000000000000000-0000000480000000
>  NODE_DATA [0000000000012040 - 000000000001703f]
>  bootmap [0000000000100000 -  000000000018ffff] pages 90
>(8 early reservations) ==> bootmem [0000000000 - 0480000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00017d84b0]    TEXT DATA BSS ==> [0001000000 - 00017d84b0]
>  #3 [007d304000 - 007e4a2b6e]          RAMDISK ==> [007d304000 - 007e4a2b6e]
>  #4 [000009ac00 - 0000100000]    BIOS reserved ==> [000009ac00 - 0000100000]
>  #5 [00017d9000 - 00017d9288]              BRK ==> [00017d9000 - 00017d9288]
>  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>  #7 [0000012000 - 0000012030]        ACPI SLIT ==> [0000012000 - 0000012030]
>Bootmem setup node 1 0000000480000000-0000000880000000
>  NODE_DATA [0000000480000000 - 0000000480004fff]
>  bootmap [0000000480005000 -  0000000480084fff] pages 80
>(8 early reservations) ==> bootmem [0480000000 - 0880000000]
>  #0 [0000000000 - 0000001000]   BIOS data page
>  #1 [0000006000 - 0000008000]       TRAMPOLINE
>  #2 [0001000000 - 00017d84b0]    TEXT DATA BSS
>  #3 [007d304000 - 007e4a2b6e]          RAMDISK
>  #4 [000009ac00 - 0000100000]    BIOS reserved
>  #5 [00017d9000 - 00017d9288]              BRK
>  #6 [0000010000 - 0000012000]          PGTABLE
>  #7 [0000012000 - 0000012030]        ACPI SLIT
>found SMP MP-table at [ffff8800000fcf40] fcf40
> [ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
> [ffffea000fc00000-ffffea001dbfffff] PMD -> [ffff880480200000-ffff88048e1fffff] on node 1
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00880000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000010 -> 0x0000009a
>    0: 0x00000100 -> 0x0007e4c4
>    0: 0x00100000 -> 0x00480000
>    1: 0x00480000 -> 0x00880000
>On node 0 totalpages: 4187214
>  DMA zone: 56 pages used for memmap
>  DMA zone: 106 pages reserved
>  DMA zone: 3816 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 498940 pages, LIFO batch:31
>  Normal zone: 50176 pages used for memmap
>  Normal zone: 3619840 pages, LIFO batch:31
>On node 1 totalpages: 4194304
>  Normal zone: 57344 pages used for memmap
>  Normal zone: 4136960 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
>ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
>ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
>ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
>ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
>ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
>IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
>ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
>IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 32 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 72
>PM: Registered nosave memory: 000000000009a000 - 000000000009b000
>PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 000000007e4c4000 - 000000007e5e4000
>PM: Registered nosave memory: 000000007e5e4000 - 000000007f1e4000
>PM: Registered nosave memory: 000000007f1e4000 - 000000007f260000
>PM: Registered nosave memory: 000000007f260000 - 000000007f2f9000
>PM: Registered nosave memory: 000000007f2f9000 - 000000007f300000
>PM: Registered nosave memory: 000000007f300000 - 000000007f334000
>PM: Registered nosave memory: 000000007f334000 - 000000007f33c000
>PM: Registered nosave memory: 000000007f33c000 - 000000007f365000
>PM: Registered nosave memory: 000000007f365000 - 000000007f800000
>PM: Registered nosave memory: 000000007f800000 - 0000000080000000
>PM: Registered nosave memory: 0000000080000000 - 0000000090000000
>PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
>PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
>PERCPU: Remapped at ffffc90000000000 with large pages, static data 89824 bytes
>Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 8259556
>Policy zone: Normal
>Kernel command line: initrd=alt0/all.rdz automatic=method:cdrom rescue BOOT_IMAGE=alt0/vmlinuz automatic=method:cdrom
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Initializing CPU#0
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Queued invalidation will be enabled to support x2apic and Intr-remapping.
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 32970996k/35651584k available (3643k kernel code, 2125512k absent, 555076k reserved, 2718k data, 616k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
>NR_IRQS:1280
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2900.300 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>hpet clockevent registered
>HPET: 8 timers in total, 5 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.60 BogoMIPS (lpj=2900300)
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Mount-cache hash table entries: 256
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 0/0x0 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>using mwait in idle threads.
>Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
>... version:                 3
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  3
>... counter mask:            000000070000000f
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 14672 entries in 58 pages
>DMAR:Host address width 46
>DMAR:DRHD base: 0x000000fbffe000 flags: 0x0
>IOMMU fbffe000: ver 1:0 cap d2078c106f0462 ecap f020fe
>DMAR:DRHD base: 0x000000dfffc000 flags: 0x1
>IOMMU dfffc000: ver 1:0 cap d2078c106f0462 ecap f020fe
>DMAR:RMRR base: 0x0000007f27d000 end: 0x0000007f299fff
>DMAR:ATSR flags: 0x0
>DMAR:Unknown DMAR structure type
>DMAR:Unknown DMAR structure type
>IOAPIC id 3 under DRHD base 0xfbffe000
>IOAPIC id 0 under DRHD base 0xdfffc000
>IOAPIC id 2 under DRHD base 0xdfffc000
>Enabled Interrupt-remapping
>Setting APIC routing to physical flat
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Booting processor 1 APIC 0x2 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899556)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 1/0x2 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU1: Thermal monitoring enabled (TM1)
>CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 2 APIC 0x4 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5799.09 BogoMIPS (lpj=2899548)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 2/0x4 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU2: Thermal monitoring enabled (TM1)
>CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 3 APIC 0x6 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5799.09 BogoMIPS (lpj=2899548)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 3/0x6 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU3: Thermal monitoring enabled (TM1)
>CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 4 APIC 0x8 ip 0x6000
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899551)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 4
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 4/0x8 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU4: Thermal monitoring enabled (TM1)
>CPU 4 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
>CPU4: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 5 APIC 0xa ip 0x6000
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899559)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 5
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 5/0xa -> Node 0
>mce: CPU supports 20 MCE banks
>CPU5: Thermal monitoring enabled (TM1)
>CPU 5 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
>CPU5: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 6 APIC 0xc ip 0x6000
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899553)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 6
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 6/0xc -> Node 0
>mce: CPU supports 20 MCE banks
>CPU6: Thermal monitoring enabled (TM1)
>CPU 6 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
>CPU6: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 7 APIC 0xe ip 0x6000
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899550)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 7
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 7/0xe -> Node 0
>mce: CPU supports 20 MCE banks
>CPU7: Thermal monitoring enabled (TM1)
>CPU 7 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
>CPU7: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 8 APIC 0x20 ip 0x6000
>Initializing CPU#8
>Calibrating delay using timer specific routine.. 5799.17 BogoMIPS (lpj=2899585)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 8/0x20 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU8: Thermal monitoring enabled (TM1)
>CPU 8 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 8, old 0x7040600070406, new 0x7010600070106
>CPU8: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 9 APIC 0x22 ip 0x6000
>Initializing CPU#9
>Calibrating delay using timer specific routine.. 5799.19 BogoMIPS (lpj=2899599)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 9/0x22 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU9: Thermal monitoring enabled (TM1)
>CPU 9 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 9, old 0x7040600070406, new 0x7010600070106
>CPU9: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 10 APIC 0x24 ip 0x6000
>Initializing CPU#10
>Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899619)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 2
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 10/0x24 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU10: Thermal monitoring enabled (TM1)
>CPU 10 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 10, old 0x7040600070406, new 0x7010600070106
>CPU10: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 11 APIC 0x26 ip 0x6000
>Initializing CPU#11
>Calibrating delay using timer specific routine.. 5799.21 BogoMIPS (lpj=2899609)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 3
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 11/0x26 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU11: Thermal monitoring enabled (TM1)
>CPU 11 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 11, old 0x7040600070406, new 0x7010600070106
>CPU11: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 12 APIC 0x28 ip 0x6000
>Initializing CPU#12
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 4
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 12/0x28 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU12: Thermal monitoring enabled (TM1)
>CPU 12 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 12, old 0x7040600070406, new 0x7010600070106
>CPU12: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 13 APIC 0x2a ip 0x6000
>Initializing CPU#13
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 5
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 13/0x2a -> Node 1
>mce: CPU supports 20 MCE banks
>CPU13: Thermal monitoring enabled (TM1)
>CPU 13 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 13, old 0x7040600070406, new 0x7010600070106
>CPU13: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 14 APIC 0x2c ip 0x6000
>Initializing CPU#14
>Calibrating delay using timer specific routine.. 5799.21 BogoMIPS (lpj=2899606)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 6
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 14/0x2c -> Node 1
>mce: CPU supports 20 MCE banks
>CPU14: Thermal monitoring enabled (TM1)
>CPU 14 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 14, old 0x7040600070406, new 0x7010600070106
>CPU14: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 15 APIC 0x2e ip 0x6000
>Initializing CPU#15
>Calibrating delay using timer specific routine.. 5799.29 BogoMIPS (lpj=2899645)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 7
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 15/0x2e -> Node 1
>mce: CPU supports 20 MCE banks
>CPU15: Thermal monitoring enabled (TM1)
>CPU 15 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 15, old 0x7040600070406, new 0x7010600070106
>CPU15: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 16 APIC 0x1 ip 0x6000
>Initializing CPU#16
>Calibrating delay using timer specific routine.. 5799.19 BogoMIPS (lpj=2899599)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 16/0x1 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU16: Thermal monitoring enabled (TM1)
>CPU 16 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 16, old 0x7040600070406, new 0x7010600070106
>CPU16: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 17 APIC 0x3 ip 0x6000
>Initializing CPU#17
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 17/0x3 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU17: Thermal monitoring enabled (TM1)
>CPU 17 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 17, old 0x7040600070406, new 0x7010600070106
>CPU17: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 18 APIC 0x5 ip 0x6000
>Initializing CPU#18
>Calibrating delay using timer specific routine.. 5799.24 BogoMIPS (lpj=2899621)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 18/0x5 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU18: Thermal monitoring enabled (TM1)
>CPU 18 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 18, old 0x7040600070406, new 0x7010600070106
>CPU18: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 19 APIC 0x7 ip 0x6000
>Initializing CPU#19
>Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899618)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 19/0x7 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU19: Thermal monitoring enabled (TM1)
>CPU 19 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 19, old 0x7040600070406, new 0x7010600070106
>CPU19: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 20 APIC 0x9 ip 0x6000
>Initializing CPU#20
>Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899617)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 4
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 20/0x9 -> Node 0
>mce: CPU supports 20 MCE banks
>CPU20: Thermal monitoring enabled (TM1)
>CPU 20 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 20, old 0x7040600070406, new 0x7010600070106
>CPU20: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 21 APIC 0xb ip 0x6000
>Initializing CPU#21
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899625)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 5
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 21/0xb -> Node 0
>mce: CPU supports 20 MCE banks
>CPU21: Thermal monitoring enabled (TM1)
>CPU 21 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 21, old 0x7040600070406, new 0x7010600070106
>CPU21: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 22 APIC 0xd ip 0x6000
>Initializing CPU#22
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899627)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 6
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 22/0xd -> Node 0
>mce: CPU supports 20 MCE banks
>CPU22: Thermal monitoring enabled (TM1)
>CPU 22 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 22, old 0x7040600070406, new 0x7010600070106
>CPU22: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 23 APIC 0xf ip 0x6000
>Initializing CPU#23
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899625)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 7
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 23/0xf -> Node 0
>mce: CPU supports 20 MCE banks
>CPU23: Thermal monitoring enabled (TM1)
>CPU 23 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 23, old 0x7040600070406, new 0x7010600070106
>CPU23: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 24 APIC 0x21 ip 0x6000
>Initializing CPU#24
>Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899619)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 24/0x21 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU24: Thermal monitoring enabled (TM1)
>CPU 24 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 24, old 0x7040600070406, new 0x7010600070106
>CPU24: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 25 APIC 0x23 ip 0x6000
>Initializing CPU#25
>Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899617)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 25/0x23 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU25: Thermal monitoring enabled (TM1)
>CPU 25 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 25, old 0x7040600070406, new 0x7010600070106
>CPU25: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 26 APIC 0x25 ip 0x6000
>Initializing CPU#26
>Calibrating delay using timer specific routine.. 5799.38 BogoMIPS (lpj=2899692)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 2
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 26/0x25 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU26: Thermal monitoring enabled (TM1)
>CPU 26 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 26, old 0x7040600070406, new 0x7010600070106
>CPU26: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 27 APIC 0x27 ip 0x6000
>Initializing CPU#27
>Calibrating delay using timer specific routine.. 5799.38 BogoMIPS (lpj=2899692)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 3
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 27/0x27 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU27: Thermal monitoring enabled (TM1)
>CPU 27 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 27, old 0x7040600070406, new 0x7010600070106
>CPU27: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 28 APIC 0x29 ip 0x6000
>Initializing CPU#28
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899627)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 4
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 28/0x29 -> Node 1
>mce: CPU supports 20 MCE banks
>CPU28: Thermal monitoring enabled (TM1)
>CPU 28 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 28, old 0x7040600070406, new 0x7010600070106
>CPU28: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 29 APIC 0x2b ip 0x6000
>Initializing CPU#29
>Calibrating delay using timer specific routine.. 5799.29 BogoMIPS (lpj=2899649)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 5
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 29/0x2b -> Node 1
>mce: CPU supports 20 MCE banks
>CPU29: Thermal monitoring enabled (TM1)
>CPU 29 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 29, old 0x7040600070406, new 0x7010600070106
>CPU29: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 30 APIC 0x2d ip 0x6000
>Initializing CPU#30
>Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899555)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 6
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 30/0x2d -> Node 1
>mce: CPU supports 20 MCE banks
>CPU30: Thermal monitoring enabled (TM1)
>CPU 30 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 30, old 0x7040600070406, new 0x7010600070106
>CPU30: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Booting processor 31 APIC 0x2f ip 0x6000
>Initializing CPU#31
>Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 7
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 20480K
>CPU 31/0x2f -> Node 1
>mce: CPU supports 20 MCE banks
>CPU31: Thermal monitoring enabled (TM1)
>CPU 31 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
>x86 PAT enabled: cpu 31, old 0x7040600070406, new 0x7010600070106
>CPU31: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
>Skipping synchronization checks as TSC is reliable.
>Brought up 32 CPUs
>Total of 32 processors activated (185576.24 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU1 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 0
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU2 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 2 3 4 5 6 7 16 17 18 19 20 21 22 23 0 1
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU3 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 3 4 5 6 7 16 17 18 19 20 21 22 23 0 1 2
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU4 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 4 5 6 7 16 17 18 19 20 21 22 23 0 1 2 3
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU5 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 5 6 7 16 17 18 19 20 21 22 23 0 1 2 3 4
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU6 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 6 7 16 17 18 19 20 21 22 23 0 1 2 3 4 5
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU7 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 7 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU8 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 8 9 10 11 12 13 14 15 24 25 26 27 28 29 30 31
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU9 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 9 10 11 12 13 14 15 24 25 26 27 28 29 30 31 8
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU10 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 10 11 12 13 14 15 24 25 26 27 28 29 30 31 8 9
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU11 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 11 12 13 14 15 24 25 26 27 28 29 30 31 8 9 10
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU12 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 12 13 14 15 24 25 26 27 28 29 30 31 8 9 10 11
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU13 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 13 14 15 24 25 26 27 28 29 30 31 8 9 10 11 12
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU14 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 14 15 24 25 26 27 28 29 30 31 8 9 10 11 12 13
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU15 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 15 24 25 26 27 28 29 30 31 8 9 10 11 12 13 14
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU16 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU17 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 16
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU18 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 18 19 20 21 22 23 0 1 2 3 4 5 6 7 16 17
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU19 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 19 20 21 22 23 0 1 2 3 4 5 6 7 16 17 18
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU20 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 20 21 22 23 0 1 2 3 4 5 6 7 16 17 18 19
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU21 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 21 22 23 0 1 2 3 4 5 6 7 16 17 18 19 20
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU22 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 22 23 0 1 2 3 4 5 6 7 16 17 18 19 20 21
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU23 attaching sched-domain:
> domain 0: span 0-7,16-23 level MC
>  groups: 23 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22
>  domain 1: span 0-31 level NODE
>   groups: 0-7,16-23 8-15,24-31
>CPU24 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 24 25 26 27 28 29 30 31 8 9 10 11 12 13 14 15
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU25 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 25 26 27 28 29 30 31 8 9 10 11 12 13 14 15 24
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU26 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 26 27 28 29 30 31 8 9 10 11 12 13 14 15 24 25
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU27 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 27 28 29 30 31 8 9 10 11 12 13 14 15 24 25 26
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU28 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 28 29 30 31 8 9 10 11 12 13 14 15 24 25 26 27
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU29 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 29 30 31 8 9 10 11 12 13 14 15 24 25 26 27 28
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU30 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 30 31 8 9 10 11 12 13 14 15 24 25 26 27 28 29
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>CPU31 attaching sched-domain:
> domain 0: span 8-15,24-31 level MC
>  groups: 31 8 9 10 11 12 13 14 15 24 25 26 27 28 29 30
>  domain 1: span 0-31 level NODE
>   groups: 8-15,24-31 0-7,16-23
>devtmpfs: initialized
>Booting paravirtualized kernel on bare hardware
>Time: 20:22:22  Date: 05/03/12
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
>PCI: MCFG area at 80000000 reserved in E820
>PCI: Using MMCONFIG at 80000000 - 8fffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:00.0: PME# disabled
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:03.2: PME# disabled
>pci 0000:00:04.0: reg 10 64bit mmio: [0xde51c000-0xde51ffff]
>pci 0000:00:04.1: reg 10 64bit mmio: [0xde518000-0xde51bfff]
>pci 0000:00:04.2: reg 10 64bit mmio: [0xde514000-0xde517fff]
>pci 0000:00:04.3: reg 10 64bit mmio: [0xde510000-0xde513fff]
>pci 0000:00:04.4: reg 10 64bit mmio: [0xde50c000-0xde50ffff]
>pci 0000:00:04.5: reg 10 64bit mmio: [0xde508000-0xde50bfff]
>pci 0000:00:04.6: reg 10 64bit mmio: [0xde504000-0xde507fff]
>pci 0000:00:04.7: reg 10 64bit mmio: [0xde500000-0xde503fff]
>pci 0000:00:05.4: reg 10 32bit mmio: [0xde525000-0xde525fff]
>pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:11.0: PME# disabled
>pci 0000:00:16.0: reg 10 64bit mmio: [0xfed0e000-0xfed0e00f]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:16.1: reg 10 64bit mmio: [0xfed0e010-0xfed0e01f]
>pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.1: PME# disabled
>pci 0000:00:1a.0: reg 10 32bit mmio: [0xde523000-0xde5233ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1d.0: reg 10 32bit mmio: [0xde522000-0xde5223ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0x9070-0x9077]
>pci 0000:00:1f.2: reg 14 io port: [0x9060-0x9063]
>pci 0000:00:1f.2: reg 18 io port: [0x9050-0x9057]
>pci 0000:00:1f.2: reg 1c io port: [0x9040-0x9043]
>pci 0000:00:1f.2: reg 20 io port: [0x9020-0x903f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xde521000-0xde5217ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xde520000-0xde5200ff]
>pci 0000:00:1f.3: reg 20 io port: [0x9000-0x901f]
>pci 0000:02:00.0: reg 10 32bit mmio: [0xdf320000-0xdf33ffff]
>pci 0000:02:00.0: reg 18 io port: [0x8020-0x803f]
>pci 0000:02:00.0: reg 1c 32bit mmio: [0xdf3c4000-0xdf3c7fff]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.1: reg 10 32bit mmio: [0xdf300000-0xdf31ffff]
>pci 0000:02:00.1: reg 18 io port: [0x8000-0x801f]
>pci 0000:02:00.1: reg 1c 32bit mmio: [0xdf3c0000-0xdf3c3fff]
>pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.1: PME# disabled
>pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
>pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
>pci 0000:00:01.1: bridge io port: [0x8000-0x8fff]
>pci 0000:00:01.1: bridge 32bit mmio: [0xdf300000-0xdf3fffff]
>pci 0000:04:00.0: reg 10 32bit mmio: [0xde000000-0xde3fffff]
>pci 0000:04:00.0: reg 18 64bit mmio: [0xdc000000-0xddffffff]
>pci 0000:04:00.0: reg 30 32bit mmio: [0xde400000-0xde4fffff]
>pci 0000:00:02.0: bridge 32bit mmio: [0xdc000000-0xde4fffff]
>pci 0000:07:00.0: reg 10 64bit mmio: [0xdb47c000-0xdb47ffff]
>pci 0000:07:00.0: reg 18 64bit mmio: [0xdb000000-0xdb3fffff]
>pci 0000:07:00.0: reg 20 io port: [0x7000-0x70ff]
>pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
>pci 0000:07:00.3: reg 10 32bit mmio: [0xdf200000-0xdf200fff]
>pci 0000:07:00.3: reg 20 io port: [0x7100-0x711f]
>pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
>pci 0000:07:00.3: PME# disabled
>pci 0000:00:11.0: bridge io port: [0x7000-0x7fff]
>pci 0000:00:11.0: bridge 32bit mmio: [0xdf200000-0xdf2fffff]
>pci 0000:00:11.0: bridge 64bit mmio pref: [0xdb000000-0xdb4fffff]
>pci 0000:08:03.0: reg 10 32bit mmio: [0xda000000-0xdaffffff]
>pci 0000:08:03.0: reg 14 32bit mmio: [0xdf000000-0xdf003fff]
>pci 0000:08:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xde800000-0xdf0fffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xda000000-0xdaffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR33._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
>ACPI: PCI Root Bridge [UNC0] (0000:7f)
>ACPI: PCI Root Bridge [PCI1] (0000:80)
>pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:00.0: PME# disabled
>pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:01.0: PME# disabled
>pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:02.0: PME# disabled
>pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:80:03.0: PME# disabled
>pci 0000:80:04.0: reg 10 64bit mmio: [0xfa71c000-0xfa71ffff]
>pci 0000:80:04.1: reg 10 64bit mmio: [0xfa718000-0xfa71bfff]
>pci 0000:80:04.2: reg 10 64bit mmio: [0xfa714000-0xfa717fff]
>pci 0000:80:04.3: reg 10 64bit mmio: [0xfa710000-0xfa713fff]
>pci 0000:80:04.4: reg 10 64bit mmio: [0xfa70c000-0xfa70ffff]
>pci 0000:80:04.5: reg 10 64bit mmio: [0xfa708000-0xfa70bfff]
>pci 0000:80:04.6: reg 10 64bit mmio: [0xfa704000-0xfa707fff]
>pci 0000:80:04.7: reg 10 64bit mmio: [0xfa700000-0xfa703fff]
>pci 0000:80:05.4: reg 10 32bit mmio: [0xfa720000-0xfa720fff]
>pci 0000:83:00.0: reg 10 64bit mmio: [0xf7000000-0xf7ffffff]
>pci 0000:83:00.0: reg 18 64bit mmio: [0xfa500000-0xfa5fffff]
>pci 0000:83:00.0: reg 30 32bit mmio: [0xfa600000-0xfa67ffff]
>pci 0000:80:02.0: bridge 32bit mmio: [0xfa500000-0xfa6fffff]
>pci 0000:80:02.0: bridge 64bit mmio pref: [0xf7000000-0xf7ffffff]
>pci 0000:84:00.0: reg 10 32bit mmio: [0xfa000000-0xfa3fffff]
>pci 0000:84:00.0: reg 18 64bit mmio: [0xf8000000-0xf9ffffff]
>pci 0000:84:00.0: reg 30 32bit mmio: [0xfa400000-0xfa4fffff]
>pci 0000:80:03.0: bridge 32bit mmio: [0xf8000000-0xfa4fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Root Bridge [UNC1] (0000:ff)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:Unsupported device scope
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 72, 73, 74, 75, 76, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>hpet: hpet2 irq 72 for MSI
>hpet: hpet3 irq 73 for MSI
>hpet: hpet4 irq 74 for MSI
>hpet: hpet5 irq 75 for MSI
>hpet: hpet6 irq 76 for MSI
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 15
>Switched to high resolution mode on CPU 9
>Switched to high resolution mode on CPU 8
>Switched to high resolution mode on CPU 14
>Switched to high resolution mode on CPU 12
>Switched to high resolution mode on CPU 11
>Switched to high resolution mode on CPU 13
>Switched to high resolution mode on CPU 22
>Switched to high resolution mode on CPU 10
>Switched to high resolution mode on CPU 16
>Switched to high resolution mode on CPU 17
>Switched to high resolution mode on CPU 21
>Switched to high resolution mode on CPU 20
>Switched to high resolution mode on CPU 19
>Switched to high resolution mode on CPU 23
>Switched to high resolution mode on CPU 18
>Switched to high resolution mode on CPU 24
>Switched to high resolution mode on CPU 31
>Switched to high resolution mode on CPU 30
>Switched to high resolution mode on CPU 28
>Switched to high resolution mode on CPU 25
>Switched to high resolution mode on CPU 29
>Switched to high resolution mode on CPU 27
>Switched to high resolution mode on CPU 26
>Switched to high resolution mode on CPU 6
>Switched to high resolution mode on CPU 5
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 7
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 4
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 20 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
>system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
>system 00:01: iomem range 0xfe000000-0xfeafffff has been reserved
>system 00:01: iomem range 0xfeb00000-0xfebfffff has been reserved
>system 00:01: iomem range 0xfed00400-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfedfffff has been reserved
>system 00:02: iomem range 0xdfffc000-0xdfffdfff has been reserved
>system 00:03: ioport range 0xa00-0xa7f has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0c: ioport range 0x400-0x453 has been reserved
>system 00:0c: ioport range 0x458-0x47f has been reserved
>system 00:0c: ioport range 0x1180-0x119f has been reserved
>system 00:0c: ioport range 0x500-0x57f has been reserved
>system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:0c: iomem range 0xfed08000-0xfed08fff has been reserved
>system 00:0c: iomem range 0xff000000-0xffffffff has been reserved
>system 00:0d: ioport range 0x454-0x457 has been reserved
>system 00:12: iomem range 0xfbffe000-0xfbffffff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: disabled
>pci 0000:00:01.0:   PREFETCH window: disabled
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
>pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
>pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
>pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
>pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
>pci 0000:00:01.1: PCI bridge, secondary bus 0000:02
>pci 0000:00:01.1:   IO window: 0x8000-0x8fff
>pci 0000:00:01.1:   MEM window: 0xdf300000-0xdf3fffff
>pci 0000:00:01.1:   PREFETCH window: disabled
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:02.0:   IO window: disabled
>pci 0000:00:02.0:   MEM window: 0xdc000000-0xde4fffff
>pci 0000:00:02.0:   PREFETCH window: disabled
>pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:03.0:   IO window: disabled
>pci 0000:00:03.0:   MEM window: disabled
>pci 0000:00:03.0:   PREFETCH window: disabled
>pci 0000:00:03.2: PCI bridge, secondary bus 0000:06
>pci 0000:00:03.2:   IO window: disabled
>pci 0000:00:03.2:   MEM window: disabled
>pci 0000:00:03.2:   PREFETCH window: disabled
>pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
>pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
>pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
>pci 0000:00:11.0: PCI bridge, secondary bus 0000:07
>pci 0000:00:11.0:   IO window: 0x7000-0x7fff
>pci 0000:00:11.0:   MEM window: 0xdf200000-0xdf2fffff
>pci 0000:00:11.0:   PREFETCH window: 0x000000db000000-0x000000db4fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xde800000-0xdf0fffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000da000000-0x000000daffffff
>alloc irq_2_iommu on node 0
>pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:01.1: PCI INT A -> GSI 26 (level, low) -> IRQ 26
>pci 0000:00:01.1: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
>pci 0000:00:02.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40
>pci 0000:00:03.2: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:11.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:80:00.0: PCI bridge, secondary bus 0000:81
>pci 0000:80:00.0:   IO window: disabled
>pci 0000:80:00.0:   MEM window: disabled
>pci 0000:80:00.0:   PREFETCH window: disabled
>pci 0000:80:01.0: PCI bridge, secondary bus 0000:82
>pci 0000:80:01.0:   IO window: disabled
>pci 0000:80:01.0:   MEM window: disabled
>pci 0000:80:01.0:   PREFETCH window: disabled
>pci 0000:80:02.0: PCI bridge, secondary bus 0000:83
>pci 0000:80:02.0:   IO window: disabled
>pci 0000:80:02.0:   MEM window: 0xfa500000-0xfa6fffff
>pci 0000:80:02.0:   PREFETCH window: 0x000000f7000000-0x000000f7ffffff
>pci 0000:80:03.0: PCI bridge, secondary bus 0000:84
>pci 0000:80:03.0:   IO window: disabled
>pci 0000:80:03.0:   MEM window: 0xf8000000-0xfa4fffff
>pci 0000:80:03.0:   PREFETCH window: disabled
>alloc irq_2_iommu on node 0
>pci 0000:80:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
>pci 0000:80:00.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
>pci 0000:80:01.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
>pci 0000:80:02.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
>pci 0000:80:03.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:02: resource 0 io:  [0x8000-0x8fff]
>pci_bus 0000:02: resource 1 mem: [0xdf300000-0xdf3fffff]
>pci_bus 0000:04: resource 1 mem: [0xdc000000-0xde4fffff]
>pci_bus 0000:07: resource 0 io:  [0x7000-0x7fff]
>pci_bus 0000:07: resource 1 mem: [0xdf200000-0xdf2fffff]
>pci_bus 0000:07: resource 2 pref mem [0xdb000000-0xdb4fffff]
>pci_bus 0000:08: resource 1 mem: [0xde800000-0xdf0fffff]
>pci_bus 0000:08: resource 2 pref mem [0xda000000-0xdaffffff]
>pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:7f: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:80: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:80: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:83: resource 1 mem: [0xfa500000-0xfa6fffff]
>pci_bus 0000:83: resource 2 pref mem [0xf7000000-0xf7ffffff]
>pci_bus 0000:84: resource 1 mem: [0xf8000000-0xfa4fffff]
>pci_bus 0000:ff: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 18042k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1336076542.899:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 32768
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:08:03.0: Boot video device
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:01.0: irq 79 for MSI/MSI-X
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:01.1: irq 80 for MSI/MSI-X
>pcieport-driver 0000:00:01.1: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:02.0: irq 81 for MSI/MSI-X
>pcieport-driver 0000:00:02.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:03.0: irq 82 for MSI/MSI-X
>pcieport-driver 0000:00:03.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:03.2: irq 83 for MSI/MSI-X
>pcieport-driver 0000:00:03.2: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:00:11.0: irq 84 for MSI/MSI-X
>pcieport-driver 0000:00:11.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:80:00.0: irq 85 for MSI/MSI-X
>pcieport-driver 0000:80:00.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:80:01.0: irq 86 for MSI/MSI-X
>pcieport-driver 0000:80:01.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:80:02.0: irq 87 for MSI/MSI-X
>pcieport-driver 0000:80:02.0: setting latency timer to 64
>alloc irq_2_iommu on node 0
>pcieport-driver 0000:80:03.0: irq 88 for MSI/MSI-X
>pcieport-driver 0000:80:03.0: setting latency timer to 64
>Firmware did not grant requested _OSC control
>aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:00:01.1:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:00:03.2:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:80:00.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:80:01.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:80:02.0:pcie02: AER service couldn't init device: no _OSC support
>Firmware did not grant requested _OSC control
>aer 0000:80:03.0:pcie02: AER service couldn't init device: no _OSC support
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: No controller found.
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:07: RTC can wake from S4
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 12:163:396
>rtc_cmos 00:07: setting system clock to 2012-05-03 20:22:23 UTC (1336076543)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 616k freed
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xde523000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>alloc irq_2_iommu on node 0
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xde522000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.6: new full speed USB device using ehci_hcd and address 3
>usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
>usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.6: Product: Hermon USB hidmouse Device
>usb 1-1.6: Manufacturer: Winbond Electronics Corp
>usb 1-1.6: configuration #1 chosen from 1 choice
>usb 2-1.1: new low speed USB device using ehci_hcd and address 3
>usb 2-1.1: New USB device found, idVendor=045e, idProduct=00f6
>usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.1: Product: Comfort Optical Mouse 1000
>usb 2-1.1: Manufacturer: Microsoft
>usb 2-1.1: configuration #1 chosen from 1 choice
>usb 2-1.2: new low speed USB device using ehci_hcd and address 4
>usb 2-1.2: New USB device found, idVendor=045e, idProduct=0750
>usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.2: Product: Wired Keyboard 600
>usb 2-1.2: Manufacturer: Microsoft
>usb 2-1.2: configuration #1 chosen from 1 choice
>usb 2-1.3: new low speed USB device using ehci_hcd and address 5
>usb 2-1.3: New USB device found, idVendor=0d7a, idProduct=0001
>usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.3: Product: USB CrypToken
>usb 2-1.3: Manufacturer: MARX
>usb 2-1.3: configuration #1 chosen from 1 choice
>usb 2-1.4: new high speed USB device using ehci_hcd and address 6
>usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=0c31
>usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>usb 2-1.4: Product: USB to Serial-ATA bridge
>usb 2-1.4: Manufacturer: Sunplus Innovation Technology.
>usb 2-1.4: SerialNumber: FFFFFFFEDF101240087674
>usb 2-1.4: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input1
>generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
>input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input2
>generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
>input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
>generic-usb 0003:045E:00F6.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1d.0-1.1/input0
>input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
>generic-usb 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.2/input0
>input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
>generic-usb 0003:045E:0750.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.2/input1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Uniform Multi-Platform E-IDE driver
>ide-cd driver 5.00
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>alloc irq_2_iommu on node 0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>alloc irq_2_iommu on node 0
>ahci 0000:00:1f.2: irq 89 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521100 irq 89
>ata2: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521180 irq 89
>ata3: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521200 irq 89
>ata4: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521280 irq 89
>ata5: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521300 irq 89
>ata6: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521380 irq 89
>ata1: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3.00: ATA-8: WDC WD3200BEKT-60KA9T0, 01.01A01, max UDMA/133
>ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-6 01.0 PQ: 0 ANSI: 5
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 6:0:0:0: CD-ROM            Slimtype DVD A  DS8A5S    WX13 PQ: 0 ANSI: 0
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>usb-storage: device scan complete
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>loop: module loaded
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>Tomoyo security MAC extension available but disabled by default. If you want to
>enable and use it, ccs-tools package must be installed.
>floppy0: no floppy controllers found
>NET: Registered protocol family 17
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>JFS: nTxBlock = 8192, nTxLock = 65536
>sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with writeback data mode.

Linux version 2.6.31.5-desktop-1mnb (herton@celeste.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 00:05:22 EDT 2009
Command line: initrd=alt0/all.rdz automatic=method:cdrom rescue BOOT_IMAGE=alt0/vmlinuz automatic=method:cdrom
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
 BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007e4c4000 (usable)
 BIOS-e820: 000000007e4c4000 - 000000007e5e4000 (ACPI NVS)
 BIOS-e820: 000000007e5e4000 - 000000007f1e4000 (reserved)
 BIOS-e820: 000000007f1e4000 - 000000007f260000 (ACPI data)
 BIOS-e820: 000000007f260000 - 000000007f2f9000 (reserved)
 BIOS-e820: 000000007f2f9000 - 000000007f300000 (ACPI NVS)
 BIOS-e820: 000000007f300000 - 000000007f334000 (reserved)
 BIOS-e820: 000000007f334000 - 000000007f33c000 (ACPI NVS)
 BIOS-e820: 000000007f33c000 - 000000007f365000 (reserved)
 BIOS-e820: 000000007f365000 - 000000007f800000 (ACPI NVS)
 BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000880000000 (usable)
DMI 2.7 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FF800000000 write-back
  1 base 000800000000 mask 3FFF80000000 write-back
  2 base 000080000000 mask 3FFF80000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7e4c4 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007e4c4000
 0000000000 - 0040000000 page 1G
 0040000000 - 007e400000 page 2M
 007e400000 - 007e4c4000 page 4k
kernel direct mapping tables up to 7e4c4000 @ 10000-13000
init_memory_mapping: 0000000100000000-0000000880000000
 0100000000 - 0880000000 page 1G
kernel direct mapping tables up to 880000000 @ 12000-13000
RAMDISK: 7d304000 - 7e4a2b6e
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 000000007f1e4088 00094 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 000000007f1ee938 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 000000007f1e41b0 0A788 (v02 ALASKA    A M I 00000015 INTL 20051117)
ACPI: FACS 000000007f339f80 00040
ACPI: APIC 000000007f1eea30 00224 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: SRAT 000000007f1eec58 004B0 (v01 A M I  AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 000000007f1ef108 00030 (v01 A M I  AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 000000007f1ef138 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SPMI 000000007f1ef170 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007f1ef1b0 70104 (v02  INTEL    CpuPm 00004000 INTL 20051117)
ACPI: BGRT 000000007f25f2b8 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 000000007f25f2f0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: DMAR 000000007f25f330 00170 (v01 A M I   OEMDMAR 00000001 INTL 00000001)
ACPI: EINJ 000000007f25f4a0 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 000000007f25f5d0 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 000000007f25f7e0 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 000000007f25f888 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 9 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 11 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 13 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 0 -> APIC 15 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-480000000
SRAT: Node 1 PXM 1 480000000-880000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000480000000
  NODE_DATA [0000000000012040 - 000000000001703f]
  bootmap [0000000000100000 -  000000000018ffff] pages 90
(8 early reservations) ==> bootmem [0000000000 - 0480000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 00017d84b0]    TEXT DATA BSS ==> [0001000000 - 00017d84b0]
  #3 [007d304000 - 007e4a2b6e]          RAMDISK ==> [007d304000 - 007e4a2b6e]
  #4 [000009ac00 - 0000100000]    BIOS reserved ==> [000009ac00 - 0000100000]
  #5 [00017d9000 - 00017d9288]              BRK ==> [00017d9000 - 00017d9288]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [0000012000 - 0000012030]        ACPI SLIT ==> [0000012000 - 0000012030]
Bootmem setup node 1 0000000480000000-0000000880000000
  NODE_DATA [0000000480000000 - 0000000480004fff]
  bootmap [0000000480005000 -  0000000480084fff] pages 80
(8 early reservations) ==> bootmem [0480000000 - 0880000000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0001000000 - 00017d84b0]    TEXT DATA BSS
  #3 [007d304000 - 007e4a2b6e]          RAMDISK
  #4 [000009ac00 - 0000100000]    BIOS reserved
  #5 [00017d9000 - 00017d9288]              BRK
  #6 [0000010000 - 0000012000]          PGTABLE
  #7 [0000012000 - 0000012030]        ACPI SLIT
found SMP MP-table at [ffff8800000fcf40] fcf40
 [ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
 [ffffea000fc00000-ffffea001dbfffff] PMD -> [ffff880480200000-ffff88048e1fffff] on node 1
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00880000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009a
    0: 0x00000100 -> 0x0007e4c4
    0: 0x00100000 -> 0x00480000
    1: 0x00480000 -> 0x00880000
On node 0 totalpages: 4187214
  DMA zone: 56 pages used for memmap
  DMA zone: 106 pages reserved
  DMA zone: 3816 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 498940 pages, LIFO batch:31
  Normal zone: 50176 pages used for memmap
  Normal zone: 3619840 pages, LIFO batch:31
On node 1 totalpages: 4194304
  Normal zone: 57344 pages used for memmap
  Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007e4c4000 - 000000007e5e4000
PM: Registered nosave memory: 000000007e5e4000 - 000000007f1e4000
PM: Registered nosave memory: 000000007f1e4000 - 000000007f260000
PM: Registered nosave memory: 000000007f260000 - 000000007f2f9000
PM: Registered nosave memory: 000000007f2f9000 - 000000007f300000
PM: Registered nosave memory: 000000007f300000 - 000000007f334000
PM: Registered nosave memory: 000000007f334000 - 000000007f33c000
PM: Registered nosave memory: 000000007f33c000 - 000000007f365000
PM: Registered nosave memory: 000000007f365000 - 000000007f800000
PM: Registered nosave memory: 000000007f800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Remapped at ffffc90000000000 with large pages, static data 89824 bytes
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 8259556
Policy zone: Normal
Kernel command line: initrd=alt0/all.rdz automatic=method:cdrom rescue BOOT_IMAGE=alt0/vmlinuz automatic=method:cdrom
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32970996k/35651584k available (3643k kernel code, 2125512k absent, 555076k reserved, 2718k data, 616k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
NR_IRQS:1280
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2900.300 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.60 BogoMIPS (lpj=2900300)
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 0/0x0 -> Node 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
using mwait in idle threads.
Performance Counters: Nehalem/Corei7 events, Intel PMU driver.
... version:                 3
... bit width:               48
... generic counters:        4
... value mask:              0000ffffffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  3
... counter mask:            000000070000000f
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 14672 entries in 58 pages
DMAR:Host address width 46
DMAR:DRHD base: 0x000000fbffe000 flags: 0x0
IOMMU fbffe000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR:DRHD base: 0x000000dfffc000 flags: 0x1
IOMMU dfffc000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR:RMRR base: 0x0000007f27d000 end: 0x0000007f299fff
DMAR:ATSR flags: 0x0
DMAR:Unknown DMAR structure type
DMAR:Unknown DMAR structure type
IOAPIC id 3 under DRHD base 0xfbffe000
IOAPIC id 0 under DRHD base 0xdfffc000
IOAPIC id 2 under DRHD base 0xdfffc000
Enabled Interrupt-remapping
Setting APIC routing to physical flat
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899556)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 1/0x2 -> Node 0
mce: CPU supports 20 MCE banks
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5799.09 BogoMIPS (lpj=2899548)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 2/0x4 -> Node 0
mce: CPU supports 20 MCE banks
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5799.09 BogoMIPS (lpj=2899548)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 3/0x6 -> Node 0
mce: CPU supports 20 MCE banks
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 4 APIC 0x8 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899551)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 4/0x8 -> Node 0
mce: CPU supports 20 MCE banks
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
CPU4: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 5 APIC 0xa ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899559)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 5/0xa -> Node 0
mce: CPU supports 20 MCE banks
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU5: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 6 APIC 0xc ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899553)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 6/0xc -> Node 0
mce: CPU supports 20 MCE banks
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
CPU6: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 7 APIC 0xe ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5799.10 BogoMIPS (lpj=2899550)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 7/0xe -> Node 0
mce: CPU supports 20 MCE banks
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
CPU7: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 8 APIC 0x20 ip 0x6000
Initializing CPU#8
Calibrating delay using timer specific routine.. 5799.17 BogoMIPS (lpj=2899585)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 8/0x20 -> Node 1
mce: CPU supports 20 MCE banks
CPU8: Thermal monitoring enabled (TM1)
CPU 8 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8 CMCI:9 CMCI:10 CMCI:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 8, old 0x7040600070406, new 0x7010600070106
CPU8: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 9 APIC 0x22 ip 0x6000
Initializing CPU#9
Calibrating delay using timer specific routine.. 5799.19 BogoMIPS (lpj=2899599)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 9/0x22 -> Node 1
mce: CPU supports 20 MCE banks
CPU9: Thermal monitoring enabled (TM1)
CPU 9 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 9, old 0x7040600070406, new 0x7010600070106
CPU9: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 10 APIC 0x24 ip 0x6000
Initializing CPU#10
Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899619)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 10/0x24 -> Node 1
mce: CPU supports 20 MCE banks
CPU10: Thermal monitoring enabled (TM1)
CPU 10 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 10, old 0x7040600070406, new 0x7010600070106
CPU10: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 11 APIC 0x26 ip 0x6000
Initializing CPU#11
Calibrating delay using timer specific routine.. 5799.21 BogoMIPS (lpj=2899609)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 11/0x26 -> Node 1
mce: CPU supports 20 MCE banks
CPU11: Thermal monitoring enabled (TM1)
CPU 11 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 11, old 0x7040600070406, new 0x7010600070106
CPU11: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 12 APIC 0x28 ip 0x6000
Initializing CPU#12
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 12/0x28 -> Node 1
mce: CPU supports 20 MCE banks
CPU12: Thermal monitoring enabled (TM1)
CPU 12 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 12, old 0x7040600070406, new 0x7010600070106
CPU12: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 13 APIC 0x2a ip 0x6000
Initializing CPU#13
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 13/0x2a -> Node 1
mce: CPU supports 20 MCE banks
CPU13: Thermal monitoring enabled (TM1)
CPU 13 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 13, old 0x7040600070406, new 0x7010600070106
CPU13: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 14 APIC 0x2c ip 0x6000
Initializing CPU#14
Calibrating delay using timer specific routine.. 5799.21 BogoMIPS (lpj=2899606)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 14/0x2c -> Node 1
mce: CPU supports 20 MCE banks
CPU14: Thermal monitoring enabled (TM1)
CPU 14 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 14, old 0x7040600070406, new 0x7010600070106
CPU14: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 15 APIC 0x2e ip 0x6000
Initializing CPU#15
Calibrating delay using timer specific routine.. 5799.29 BogoMIPS (lpj=2899645)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 15/0x2e -> Node 1
mce: CPU supports 20 MCE banks
CPU15: Thermal monitoring enabled (TM1)
CPU 15 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 15, old 0x7040600070406, new 0x7010600070106
CPU15: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 16 APIC 0x1 ip 0x6000
Initializing CPU#16
Calibrating delay using timer specific routine.. 5799.19 BogoMIPS (lpj=2899599)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 16/0x1 -> Node 0
mce: CPU supports 20 MCE banks
CPU16: Thermal monitoring enabled (TM1)
CPU 16 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 16, old 0x7040600070406, new 0x7010600070106
CPU16: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 17 APIC 0x3 ip 0x6000
Initializing CPU#17
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 17/0x3 -> Node 0
mce: CPU supports 20 MCE banks
CPU17: Thermal monitoring enabled (TM1)
CPU 17 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 17, old 0x7040600070406, new 0x7010600070106
CPU17: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 18 APIC 0x5 ip 0x6000
Initializing CPU#18
Calibrating delay using timer specific routine.. 5799.24 BogoMIPS (lpj=2899621)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 18/0x5 -> Node 0
mce: CPU supports 20 MCE banks
CPU18: Thermal monitoring enabled (TM1)
CPU 18 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 18, old 0x7040600070406, new 0x7010600070106
CPU18: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 19 APIC 0x7 ip 0x6000
Initializing CPU#19
Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899618)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 19/0x7 -> Node 0
mce: CPU supports 20 MCE banks
CPU19: Thermal monitoring enabled (TM1)
CPU 19 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 19, old 0x7040600070406, new 0x7010600070106
CPU19: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 20 APIC 0x9 ip 0x6000
Initializing CPU#20
Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899617)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 20/0x9 -> Node 0
mce: CPU supports 20 MCE banks
CPU20: Thermal monitoring enabled (TM1)
CPU 20 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 20, old 0x7040600070406, new 0x7010600070106
CPU20: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 21 APIC 0xb ip 0x6000
Initializing CPU#21
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899625)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 21/0xb -> Node 0
mce: CPU supports 20 MCE banks
CPU21: Thermal monitoring enabled (TM1)
CPU 21 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 21, old 0x7040600070406, new 0x7010600070106
CPU21: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 22 APIC 0xd ip 0x6000
Initializing CPU#22
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899627)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 22/0xd -> Node 0
mce: CPU supports 20 MCE banks
CPU22: Thermal monitoring enabled (TM1)
CPU 22 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 22, old 0x7040600070406, new 0x7010600070106
CPU22: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 23 APIC 0xf ip 0x6000
Initializing CPU#23
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899625)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 23/0xf -> Node 0
mce: CPU supports 20 MCE banks
CPU23: Thermal monitoring enabled (TM1)
CPU 23 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 23, old 0x7040600070406, new 0x7010600070106
CPU23: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 24 APIC 0x21 ip 0x6000
Initializing CPU#24
Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899619)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 24/0x21 -> Node 1
mce: CPU supports 20 MCE banks
CPU24: Thermal monitoring enabled (TM1)
CPU 24 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 24, old 0x7040600070406, new 0x7010600070106
CPU24: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 25 APIC 0x23 ip 0x6000
Initializing CPU#25
Calibrating delay using timer specific routine.. 5799.23 BogoMIPS (lpj=2899617)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 25/0x23 -> Node 1
mce: CPU supports 20 MCE banks
CPU25: Thermal monitoring enabled (TM1)
CPU 25 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 25, old 0x7040600070406, new 0x7010600070106
CPU25: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 26 APIC 0x25 ip 0x6000
Initializing CPU#26
Calibrating delay using timer specific routine.. 5799.38 BogoMIPS (lpj=2899692)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 26/0x25 -> Node 1
mce: CPU supports 20 MCE banks
CPU26: Thermal monitoring enabled (TM1)
CPU 26 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 26, old 0x7040600070406, new 0x7010600070106
CPU26: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 27 APIC 0x27 ip 0x6000
Initializing CPU#27
Calibrating delay using timer specific routine.. 5799.38 BogoMIPS (lpj=2899692)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 27/0x27 -> Node 1
mce: CPU supports 20 MCE banks
CPU27: Thermal monitoring enabled (TM1)
CPU 27 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 27, old 0x7040600070406, new 0x7010600070106
CPU27: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 28 APIC 0x29 ip 0x6000
Initializing CPU#28
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899627)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 28/0x29 -> Node 1
mce: CPU supports 20 MCE banks
CPU28: Thermal monitoring enabled (TM1)
CPU 28 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 28, old 0x7040600070406, new 0x7010600070106
CPU28: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 29 APIC 0x2b ip 0x6000
Initializing CPU#29
Calibrating delay using timer specific routine.. 5799.29 BogoMIPS (lpj=2899649)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 29/0x2b -> Node 1
mce: CPU supports 20 MCE banks
CPU29: Thermal monitoring enabled (TM1)
CPU 29 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 29, old 0x7040600070406, new 0x7010600070106
CPU29: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 30 APIC 0x2d ip 0x6000
Initializing CPU#30
Calibrating delay using timer specific routine.. 5799.11 BogoMIPS (lpj=2899555)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 30/0x2d -> Node 1
mce: CPU supports 20 MCE banks
CPU30: Thermal monitoring enabled (TM1)
CPU 30 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 30, old 0x7040600070406, new 0x7010600070106
CPU30: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Booting processor 31 APIC 0x2f ip 0x6000
Initializing CPU#31
Calibrating delay using timer specific routine.. 5799.25 BogoMIPS (lpj=2899628)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 31/0x2f -> Node 1
mce: CPU supports 20 MCE banks
CPU31: Thermal monitoring enabled (TM1)
CPU 31 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8 SHD:9 SHD:10 SHD:11 SHD:12 SHD:13 SHD:14 SHD:15 SHD:16 SHD:17 SHD:18 SHD:19
x86 PAT enabled: cpu 31, old 0x7040600070406, new 0x7010600070106
CPU31: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz stepping 06
Skipping synchronization checks as TSC is reliable.
Brought up 32 CPUs
Total of 32 processors activated (185576.24 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU1 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 0
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU2 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 2 3 4 5 6 7 16 17 18 19 20 21 22 23 0 1
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU3 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 3 4 5 6 7 16 17 18 19 20 21 22 23 0 1 2
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU4 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 4 5 6 7 16 17 18 19 20 21 22 23 0 1 2 3
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU5 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 5 6 7 16 17 18 19 20 21 22 23 0 1 2 3 4
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU6 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 6 7 16 17 18 19 20 21 22 23 0 1 2 3 4 5
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU7 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 7 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU8 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 8 9 10 11 12 13 14 15 24 25 26 27 28 29 30 31
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU9 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 9 10 11 12 13 14 15 24 25 26 27 28 29 30 31 8
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU10 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 10 11 12 13 14 15 24 25 26 27 28 29 30 31 8 9
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU11 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 11 12 13 14 15 24 25 26 27 28 29 30 31 8 9 10
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU12 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 12 13 14 15 24 25 26 27 28 29 30 31 8 9 10 11
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU13 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 13 14 15 24 25 26 27 28 29 30 31 8 9 10 11 12
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU14 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 14 15 24 25 26 27 28 29 30 31 8 9 10 11 12 13
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU15 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 15 24 25 26 27 28 29 30 31 8 9 10 11 12 13 14
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU16 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU17 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 16
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU18 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 18 19 20 21 22 23 0 1 2 3 4 5 6 7 16 17
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU19 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 19 20 21 22 23 0 1 2 3 4 5 6 7 16 17 18
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU20 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 20 21 22 23 0 1 2 3 4 5 6 7 16 17 18 19
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU21 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 21 22 23 0 1 2 3 4 5 6 7 16 17 18 19 20
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU22 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 22 23 0 1 2 3 4 5 6 7 16 17 18 19 20 21
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU23 attaching sched-domain:
 domain 0: span 0-7,16-23 level MC
  groups: 23 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22
  domain 1: span 0-31 level NODE
   groups: 0-7,16-23 8-15,24-31
CPU24 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 24 25 26 27 28 29 30 31 8 9 10 11 12 13 14 15
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU25 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 25 26 27 28 29 30 31 8 9 10 11 12 13 14 15 24
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU26 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 26 27 28 29 30 31 8 9 10 11 12 13 14 15 24 25
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU27 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 27 28 29 30 31 8 9 10 11 12 13 14 15 24 25 26
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU28 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 28 29 30 31 8 9 10 11 12 13 14 15 24 25 26 27
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU29 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 29 30 31 8 9 10 11 12 13 14 15 24 25 26 27 28
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU30 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 30 31 8 9 10 11 12 13 14 15 24 25 26 27 28 29
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
CPU31 attaching sched-domain:
 domain 0: span 8-15,24-31 level MC
  groups: 31 8 9 10 11 12 13 14 15 24 25 26 27 28 29 30
  domain 1: span 0-31 level NODE
   groups: 8-15,24-31 0-7,16-23
devtmpfs: initialized
Booting paravirtualized kernel on bare hardware
Time: 20:22:22  Date: 05/03/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:04.0: reg 10 64bit mmio: [0xde51c000-0xde51ffff]
pci 0000:00:04.1: reg 10 64bit mmio: [0xde518000-0xde51bfff]
pci 0000:00:04.2: reg 10 64bit mmio: [0xde514000-0xde517fff]
pci 0000:00:04.3: reg 10 64bit mmio: [0xde510000-0xde513fff]
pci 0000:00:04.4: reg 10 64bit mmio: [0xde50c000-0xde50ffff]
pci 0000:00:04.5: reg 10 64bit mmio: [0xde508000-0xde50bfff]
pci 0000:00:04.6: reg 10 64bit mmio: [0xde504000-0xde507fff]
pci 0000:00:04.7: reg 10 64bit mmio: [0xde500000-0xde503fff]
pci 0000:00:05.4: reg 10 32bit mmio: [0xde525000-0xde525fff]
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xfed0e000-0xfed0e00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10 64bit mmio: [0xfed0e010-0xfed0e01f]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xde523000-0xde5233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xde522000-0xde5223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x9070-0x9077]
pci 0000:00:1f.2: reg 14 io port: [0x9060-0x9063]
pci 0000:00:1f.2: reg 18 io port: [0x9050-0x9057]
pci 0000:00:1f.2: reg 1c io port: [0x9040-0x9043]
pci 0000:00:1f.2: reg 20 io port: [0x9020-0x903f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xde521000-0xde5217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xde520000-0xde5200ff]
pci 0000:00:1f.3: reg 20 io port: [0x9000-0x901f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf320000-0xdf33ffff]
pci 0000:02:00.0: reg 18 io port: [0x8020-0x803f]
pci 0000:02:00.0: reg 1c 32bit mmio: [0xdf3c4000-0xdf3c7fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.1: reg 10 32bit mmio: [0xdf300000-0xdf31ffff]
pci 0000:02:00.1: reg 18 io port: [0x8000-0x801f]
pci 0000:02:00.1: reg 1c 32bit mmio: [0xdf3c0000-0xdf3c3fff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
pci 0000:00:01.1: bridge io port: [0x8000-0x8fff]
pci 0000:00:01.1: bridge 32bit mmio: [0xdf300000-0xdf3fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xde000000-0xde3fffff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xde400000-0xde4fffff]
pci 0000:00:02.0: bridge 32bit mmio: [0xdc000000-0xde4fffff]
pci 0000:07:00.0: reg 10 64bit mmio: [0xdb47c000-0xdb47ffff]
pci 0000:07:00.0: reg 18 64bit mmio: [0xdb000000-0xdb3fffff]
pci 0000:07:00.0: reg 20 io port: [0x7000-0x70ff]
pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
pci 0000:07:00.3: reg 10 32bit mmio: [0xdf200000-0xdf200fff]
pci 0000:07:00.3: reg 20 io port: [0x7100-0x711f]
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: PME# disabled
pci 0000:00:11.0: bridge io port: [0x7000-0x7fff]
pci 0000:00:11.0: bridge 32bit mmio: [0xdf200000-0xdf2fffff]
pci 0000:00:11.0: bridge 64bit mmio pref: [0xdb000000-0xdb4fffff]
pci 0000:08:03.0: reg 10 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:08:03.0: reg 14 32bit mmio: [0xdf000000-0xdf003fff]
pci 0000:08:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde800000-0xdf0fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xda000000-0xdaffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR33._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Root Bridge [UNC0] (0000:7f)
ACPI: PCI Root Bridge [PCI1] (0000:80)
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:00.0: PME# disabled
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: PME# disabled
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: PME# disabled
pci 0000:80:04.0: reg 10 64bit mmio: [0xfa71c000-0xfa71ffff]
pci 0000:80:04.1: reg 10 64bit mmio: [0xfa718000-0xfa71bfff]
pci 0000:80:04.2: reg 10 64bit mmio: [0xfa714000-0xfa717fff]
pci 0000:80:04.3: reg 10 64bit mmio: [0xfa710000-0xfa713fff]
pci 0000:80:04.4: reg 10 64bit mmio: [0xfa70c000-0xfa70ffff]
pci 0000:80:04.5: reg 10 64bit mmio: [0xfa708000-0xfa70bfff]
pci 0000:80:04.6: reg 10 64bit mmio: [0xfa704000-0xfa707fff]
pci 0000:80:04.7: reg 10 64bit mmio: [0xfa700000-0xfa703fff]
pci 0000:80:05.4: reg 10 32bit mmio: [0xfa720000-0xfa720fff]
pci 0000:83:00.0: reg 10 64bit mmio: [0xf7000000-0xf7ffffff]
pci 0000:83:00.0: reg 18 64bit mmio: [0xfa500000-0xfa5fffff]
pci 0000:83:00.0: reg 30 32bit mmio: [0xfa600000-0xfa67ffff]
pci 0000:80:02.0: bridge 32bit mmio: [0xfa500000-0xfa6fffff]
pci 0000:80:02.0: bridge 64bit mmio pref: [0xf7000000-0xf7ffffff]
pci 0000:84:00.0: reg 10 32bit mmio: [0xfa000000-0xfa3fffff]
pci 0000:84:00.0: reg 18 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:84:00.0: reg 30 32bit mmio: [0xfa400000-0xfa4fffff]
pci 0000:80:03.0: bridge 32bit mmio: [0xf8000000-0xfa4fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [UNC1] (0000:ff)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
DMAR:Unsupported device scope
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 72, 73, 74, 75, 76, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 72 for MSI
hpet: hpet3 irq 73 for MSI
hpet: hpet4 irq 74 for MSI
hpet: hpet5 irq 75 for MSI
hpet: hpet6 irq 76 for MSI
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 15
Switched to high resolution mode on CPU 9
Switched to high resolution mode on CPU 8
Switched to high resolution mode on CPU 14
Switched to high resolution mode on CPU 12
Switched to high resolution mode on CPU 11
Switched to high resolution mode on CPU 13
Switched to high resolution mode on CPU 22
Switched to high resolution mode on CPU 10
Switched to high resolution mode on CPU 16
Switched to high resolution mode on CPU 17
Switched to high resolution mode on CPU 21
Switched to high resolution mode on CPU 20
Switched to high resolution mode on CPU 19
Switched to high resolution mode on CPU 23
Switched to high resolution mode on CPU 18
Switched to high resolution mode on CPU 24
Switched to high resolution mode on CPU 31
Switched to high resolution mode on CPU 30
Switched to high resolution mode on CPU 28
Switched to high resolution mode on CPU 25
Switched to high resolution mode on CPU 29
Switched to high resolution mode on CPU 27
Switched to high resolution mode on CPU 26
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 4
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 20 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfeafffff has been reserved
system 00:01: iomem range 0xfeb00000-0xfebfffff has been reserved
system 00:01: iomem range 0xfed00400-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed45000-0xfedfffff has been reserved
system 00:02: iomem range 0xdfffc000-0xdfffdfff has been reserved
system 00:03: ioport range 0xa00-0xa7f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x400-0x453 has been reserved
system 00:0c: ioport range 0x458-0x47f has been reserved
system 00:0c: ioport range 0x1180-0x119f has been reserved
system 00:0c: ioport range 0x500-0x57f has been reserved
system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:0c: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:0c: iomem range 0xff000000-0xffffffff has been reserved
system 00:0d: ioport range 0x454-0x457 has been reserved
system 00:12: iomem range 0xfbffe000-0xfbffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 184 32bit mmio: [0xdf3a0000-0xdf3a3fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.0: reg 190 32bit mmio: [0xdf380000-0xdf383fff]
pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
pci 0000:02:00.1: reg 184 32bit mmio: [0xdf360000-0xdf363fff]
pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
pci 0000:02:00.1: reg 190 32bit mmio: [0xdf340000-0xdf343fff]
pci 0000:00:01.1: PCI bridge, secondary bus 0000:02
pci 0000:00:01.1:   IO window: 0x8000-0x8fff
pci 0000:00:01.1:   MEM window: 0xdf300000-0xdf3fffff
pci 0000:00:01.1:   PREFETCH window: disabled
pci 0000:00:02.0: PCI bridge, secondary bus 0000:04
pci 0000:00:02.0:   IO window: disabled
pci 0000:00:02.0:   MEM window: 0xdc000000-0xde4fffff
pci 0000:00:02.0:   PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: disabled
pci 0000:00:03.0:   PREFETCH window: disabled
pci 0000:00:03.2: PCI bridge, secondary bus 0000:06
pci 0000:00:03.2:   IO window: disabled
pci 0000:00:03.2:   MEM window: disabled
pci 0000:00:03.2:   PREFETCH window: disabled
pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
pci 0000:07:00.0: reg 164 64bit mmio: [0xdb400000-0xdb403fff]
pci 0000:00:11.0: PCI bridge, secondary bus 0000:07
pci 0000:00:11.0:   IO window: 0x7000-0x7fff
pci 0000:00:11.0:   MEM window: 0xdf200000-0xdf2fffff
pci 0000:00:11.0:   PREFETCH window: 0x000000db000000-0x000000db4fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xde800000-0xdf0fffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000da000000-0x000000daffffff
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.1: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.2: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:80:00.0: PCI bridge, secondary bus 0000:81
pci 0000:80:00.0:   IO window: disabled
pci 0000:80:00.0:   MEM window: disabled
pci 0000:80:00.0:   PREFETCH window: disabled
pci 0000:80:01.0: PCI bridge, secondary bus 0000:82
pci 0000:80:01.0:   IO window: disabled
pci 0000:80:01.0:   MEM window: disabled
pci 0000:80:01.0:   PREFETCH window: disabled
pci 0000:80:02.0: PCI bridge, secondary bus 0000:83
pci 0000:80:02.0:   IO window: disabled
pci 0000:80:02.0:   MEM window: 0xfa500000-0xfa6fffff
pci 0000:80:02.0:   PREFETCH window: 0x000000f7000000-0x000000f7ffffff
pci 0000:80:03.0: PCI bridge, secondary bus 0000:84
pci 0000:80:03.0:   IO window: disabled
pci 0000:80:03.0:   MEM window: 0xf8000000-0xfa4fffff
pci 0000:80:03.0:   PREFETCH window: disabled
alloc irq_2_iommu on node 0
pci 0000:80:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:80:00.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io:  [0x8000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xdf300000-0xdf3fffff]
pci_bus 0000:04: resource 1 mem: [0xdc000000-0xde4fffff]
pci_bus 0000:07: resource 0 io:  [0x7000-0x7fff]
pci_bus 0000:07: resource 1 mem: [0xdf200000-0xdf2fffff]
pci_bus 0000:07: resource 2 pref mem [0xdb000000-0xdb4fffff]
pci_bus 0000:08: resource 1 mem: [0xde800000-0xdf0fffff]
pci_bus 0000:08: resource 2 pref mem [0xda000000-0xdaffffff]
pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:7f: resource 0 io:  [0x00-0xffff]
pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:80: resource 0 io:  [0x00-0xffff]
pci_bus 0000:80: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:83: resource 1 mem: [0xfa500000-0xfa6fffff]
pci_bus 0000:83: resource 2 pref mem [0xf7000000-0xf7ffffff]
pci_bus 0000:84: resource 1 mem: [0xf8000000-0xfa4fffff]
pci_bus 0000:ff: resource 0 io:  [0x00-0xffff]
pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18042k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1336076542.899:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:08:03.0: Boot video device
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:01.0: irq 79 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:01.1: irq 80 for MSI/MSI-X
pcieport-driver 0000:00:01.1: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:02.0: irq 81 for MSI/MSI-X
pcieport-driver 0000:00:02.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:03.0: irq 82 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:03.2: irq 83 for MSI/MSI-X
pcieport-driver 0000:00:03.2: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:00:11.0: irq 84 for MSI/MSI-X
pcieport-driver 0000:00:11.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:80:00.0: irq 85 for MSI/MSI-X
pcieport-driver 0000:80:00.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:80:01.0: irq 86 for MSI/MSI-X
pcieport-driver 0000:80:01.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:80:02.0: irq 87 for MSI/MSI-X
pcieport-driver 0000:80:02.0: setting latency timer to 64
alloc irq_2_iommu on node 0
pcieport-driver 0000:80:03.0: irq 88 for MSI/MSI-X
pcieport-driver 0000:80:03.0: setting latency timer to 64
Firmware did not grant requested _OSC control
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:01.1:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:03.2:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:80:00.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:80:01.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:80:02.0:pcie02: AER service couldn't init device: no _OSC support
Firmware did not grant requested _OSC control
aer 0000:80:03.0:pcie02: AER service couldn't init device: no _OSC support
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 12:163:396
rtc_cmos 00:07: setting system clock to 2012-05-03 20:22:23 UTC (1336076543)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 616k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xde523000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_2_iommu on node 0
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xde522000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new full speed USB device using ehci_hcd and address 3
usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Hermon USB hidmouse Device
usb 1-1.6: Manufacturer: Winbond Electronics Corp
usb 1-1.6: configuration #1 chosen from 1 choice
usb 2-1.1: new low speed USB device using ehci_hcd and address 3
usb 2-1.1: New USB device found, idVendor=045e, idProduct=00f6
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Comfort Optical Mouse 1000
usb 2-1.1: Manufacturer: Microsoft
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.2: new low speed USB device using ehci_hcd and address 4
usb 2-1.2: New USB device found, idVendor=045e, idProduct=0750
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Wired Keyboard 600
usb 2-1.2: Manufacturer: Microsoft
usb 2-1.2: configuration #1 chosen from 1 choice
usb 2-1.3: new low speed USB device using ehci_hcd and address 5
usb 2-1.3: New USB device found, idVendor=0d7a, idProduct=0001
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: USB CrypToken
usb 2-1.3: Manufacturer: MARX
usb 2-1.3: configuration #1 chosen from 1 choice
usb 2-1.4: new high speed USB device using ehci_hcd and address 6
usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=0c31
usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1.4: Product: USB to Serial-ATA bridge
usb 2-1.4: Manufacturer: Sunplus Innovation Technology.
usb 2-1.4: SerialNumber: FFFFFFFEDF101240087674
usb 2-1.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input1
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input2
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
generic-usb 0003:045E:00F6.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1d.0-1.1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
generic-usb 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.2/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
generic-usb 0003:045E:0750.0005: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.2/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 89 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521100 irq 89
ata2: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521180 irq 89
ata3: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521200 irq 89
ata4: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521280 irq 89
ata5: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521300 irq 89
ata6: SATA max UDMA/133 abar m2048@0xde521000 port 0xde521380 irq 89
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD3200BEKT-60KA9T0, 01.01A01, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-6 01.0 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: CD-ROM            Slimtype DVD A  DS8A5S    WX13 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
usb-storage: device scan complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
floppy0: no floppy controllers found
NET: Registered protocol family 17
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.

Actions: View

Attachments on bug 4905: 2170 | 2171 | 2172 | 2173 | 2178 | 2179 | 2180 | 2181 | 2182 | 2183