Attachment 2007 Details for Bug 5425 – dmesg output

dmesg output

failboot (text/plain), 63.86 KB, created by Peter Wallace on 2012-04-17 03:44:51 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Wallace

Created: 2012-04-17 03:44:51 CEST

Size: 63.86 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.1.10-desktop-2mib (mario@localhost.localdomain) (gcc version 4.6.1 20110627 (Mandriva) (GCC) ) #1 SMP PREEMPT Fri Mar 23 00:35:29 CET 2012
>Command line: BOOT_IMAGE=linux root=/dev/mapper/pdc_bgjciafdap1 nokmsboot logo.nologo quiet resume=/dev/mapper/pdc_bgjciafdap5 splash=silent vga=788
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000093c00 (usable)
> BIOS-e820: 0000000000093c00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf690000 (usable)
> BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
> BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
> BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Gigabyte Technology Co., Ltd. GA-890FXA-UD5/GA-890FXA-UD5, BIOS F6 11/24/2010
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 base 0000C0000000 mask FFFFF0000000 write-back
>  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
>  4 base 000100000000 mask FFFFE0000000 write-back
>  5 base 000120000000 mask FFFFF0000000 write-back
>  6 disabled
>  7 disabled
>TOM2: 0000000130000000 aka 4864M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcf690 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000f46f0] f46f0
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff88000008e000] 8e000 size 20480
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000cf690000
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cf600000 page 2M
> 00cf600000 - 00cf690000 page 4k
>kernel direct mapping tables up to cf690000 @ 1fffd000-20000000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ cf68e000-cf690000
>RAMDISK: 360dc000 - 37ff0000
>ACPI: RSDP 00000000000f6100 00014 (v00 GBT   )
>ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cfdf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cfdf1100 07BE3 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000cfdf0000 00040
>ACPI: SSDT 00000000cfdf8dc0 00EDC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000cfdf9cc0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cfdf9d00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: MATS 00000000cfdf9d40 00034 (v01 GBT             00000000      00000000)
>ACPI: TAMG 00000000cfdf9db0 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>ACPI: APIC 00000000cfdf8d00 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Initmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [000000012fffb000 - 000000012fffffff]
> [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x00000093
>    0: 0x00000100 -> 0x000cf690
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1046035
>  DMA zone: 64 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3902 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 829136 pages, LIFO batch:31
>  Normal zone: 3072 pages used for memmap
>  Normal zone: 193536 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 8 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 0000000000093000 - 0000000000094000
>PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cf690000 - 00000000cfdf0000
>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
>PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
>PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
>PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff88012fc00000 s76224 r8192 d22080 u262144
>pcpu-alloc: s76224 r8192 d22080 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1026574
>Policy zone: Normal
>Kernel command line: BOOT_IMAGE=linux root=/dev/mapper/pdc_bgjciafdap1 nokmsboot logo.nologo quiet resume=/dev/mapper/pdc_bgjciafdap5 splash=silent vga=788
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ e46000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ c4000000
>PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
>Memory: 3942892k/4980736k available (4272k kernel code, 796596k absent, 241248k reserved, 5168k data, 728k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Preemptible hierarchical RCU implementation.
>NR_IRQS:2304
>Console: colour dummy device 80x25
>console [tty0] enabled
>allocated 33554432 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3214.933 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.86 BogoMIPS (lpj=3214933)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>tseg: 00cff00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using AMD E400 aware idle routine
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110623
>ftrace: allocating 16670 entries in 66 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>System has AMD C1E enabled
>Switch to broadcast mode on CPU0
>MCE: In-kernel MCE decoding enabled.
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 8e000
>Switch to broadcast mode on CPU1
> #2
>smpboot cpu 2: start_ip = 8e000
>Switch to broadcast mode on CPU2
> #3
>smpboot cpu 3: start_ip = 8e000
>Switch to broadcast mode on CPU3
> #4
>smpboot cpu 4: start_ip = 8e000
>Switch to broadcast mode on CPU4
> #5
>smpboot cpu 5: start_ip = 8e000
>Brought up 6 CPUs
>Total of 6 processors activated (38576.84 BogoMIPS).
>Switch to broadcast mode on CPU5
>devtmpfs: initialized
>PM: Registering ACPI NVS region at cfdf0000 (4096 bytes)
>RTC time:  2:05:55, date: 04/17/12
>NET: Registered protocol family 16
>node 0 link 0: io port [8000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, ffffffff]
>node 0 link 0: mmio [e0000000, e07fffff] ==> [e0100000, e07fffff]
>TOM2: 0000000130000000 aka 4864M
>bus: [00, 07] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
>bus: 00 index 3 [mem 0xe0800000-0xffffffff]
>bus: 00 index 4 [mem 0xe0100000-0xe07fffff]
>bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
>Extended Config Space enabled on 1 nodes
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
>
>ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110623/tbutils-314)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
>pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
>pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:11.0: [1002:4392] type 0 class 0x000104
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
>pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
>pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
>pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
>pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
>pci 0000:00:15.0: supports D1 D2
>pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
>pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
>pci 0000:00:16.2: supports D1 D2
>pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:16.2: PME# disabled
>pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
>pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
>pci 0000:01:00.0: [1002:6898] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xee00-0xeeff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: [1002:aa50] type 0 class 0x000403
>pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
>pci 0000:02:00.0: reg 10: [mem 0xfdcfe000-0xfdcfffff 64bit]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:06.0: PCI bridge to [bus 04-04]
>pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:06.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:06.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:05:00.0: reg 10: [io  0xae00-0xaeff]
>pci 0000:05:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
>pci 0000:05:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
>pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:05:00.0: supports D1 D2
>pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:05:00.0: PME# disabled
>pci 0000:00:07.0: PCI bridge to [bus 05-05]
>pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:07.0:   bridge window [mem 0xfd200000-0xfd2fffff]
>pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:06:06.0: [1102:0004] type 0 class 0x000401
>pci 0000:06:06.0: reg 10: [io  0x9f00-0x9f1f]
>pci 0000:06:06.0: supports D1 D2
>pci 0000:06:06.1: [1102:7003] type 0 class 0x000980
>pci 0000:06:06.1: reg 10: [io  0x9e00-0x9e07]
>pci 0000:06:06.1: supports D1 D2
>pci 0000:06:06.2: [1102:4001] type 0 class 0x000c00
>pci 0000:06:06.2: reg 10: [mem 0xfd8ff000-0xfd8ff7ff]
>pci 0000:06:06.2: reg 14: [mem 0xfd8f8000-0xfd8fbfff]
>pci 0000:06:06.2: supports D1 D2
>pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:06:06.2: PME# disabled
>pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
>pci 0000:07:00.0: [197b:2363] type 0 class 0x000101
>pci 0000:07:00.0: reg 24: [mem 0xfd5fe000-0xfd5fffff]
>pci 0000:07:00.0: PME# supported from D3hot
>pci 0000:07:00.0: PME# disabled
>pci 0000:07:00.1: [197b:2363] type 0 class 0x000101
>pci 0000:07:00.1: reg 10: [io  0x8f00-0x8f07]
>pci 0000:07:00.1: reg 14: [io  0x8e00-0x8e03]
>pci 0000:07:00.1: reg 18: [io  0x8d00-0x8d07]
>pci 0000:07:00.1: reg 1c: [io  0x8c00-0x8c03]
>pci 0000:07:00.1: reg 20: [io  0x8b00-0x8b0f]
>pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:15.0: PCI bridge to [bus 07-07]
>pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 0000000000093c00 - 000000000009ffff 
>reserve RAM buffer: 00000000cf690000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #2
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #4
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #5
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xd0000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0220-0x0225]
>pnp 00:01: [io  0x0290-0x0294]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0900-0x091f]
>pnp 00:02: [io  0x0228-0x022f]
>pnp 00:02: [io  0x040b]
>pnp 00:02: [io  0x04d6]
>pnp 00:02: [io  0x0c00-0x0c01]
>pnp 00:02: [io  0x0c14]
>pnp 00:02: [io  0x0c50-0x0c52]
>pnp 00:02: [io  0x0c6c-0x0c6d]
>pnp 00:02: [io  0x0c6f]
>pnp 00:02: [io  0x0cd0-0x0cd1]
>pnp 00:02: [io  0x0cd2-0x0cd3]
>pnp 00:02: [io  0x0cd4-0x0cdf]
>pnp 00:02: [io  0x0800-0x08fe]
>pnp 00:02: [io  0x0a10-0x0a17]
>pnp 00:02: [io  0x0b00-0x0b0f]
>pnp 00:02: [io  0x0b10-0x0b1f]
>pnp 00:02: [io  0x0b20-0x0b3f]
>pnp 00:02: [mem 0x00000000-0x00000fff window]
>pnp 00:02: [mem 0xfee00400-0xfee00fff window]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>system 00:02: [io  0x0900-0x091f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x0800-0x08fe] has been reserved
>system 00:02: [io  0x0a10-0x0a17] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [io  0x0070-0x0073]
>pnp 00:04: [irq 8]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:05: [io  0x0061]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:06: [io  0x00f0-0x00ff]
>pnp 00:06: [irq 13]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:07: [mem 0xe0000000-0xefffffff]
>system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:08: [mem 0x000db000-0x000dbfff]
>pnp 00:08: [mem 0x000f0000-0x000f7fff]
>pnp 00:08: [mem 0x000f8000-0x000fbfff]
>pnp 00:08: [mem 0x000fc000-0x000fffff]
>pnp 00:08: [mem 0xcfdf0000-0xcfdfffff]
>pnp 00:08: [mem 0xffff0000-0xffffffff]
>pnp 00:08: [mem 0x00000000-0x0009ffff]
>pnp 00:08: [mem 0x00100000-0xcfdeffff]
>pnp 00:08: [mem 0xcfe00000-0xcfefffff]
>pnp 00:08: [mem 0xcff00000-0xcfffffff]
>pnp 00:08: [mem 0xfec00000-0xfec00fff]
>pnp 00:08: [mem 0xfee00000-0xfee00fff]
>pnp 00:08: [mem 0xfff80000-0xfffeffff]
>pnp 00:08: disabling [mem 0x000db000-0x000dbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
>system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
>system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
>system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:04.0: PCI bridge to [bus 02-02]
>pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:05.0: PCI bridge to [bus 03-03]
>pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
>pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci 0000:00:06.0: PCI bridge to [bus 04-04]
>pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
>pci 0000:00:06.0:   bridge window [mem 0xfd600000-0xfd6fffff]
>pci 0000:00:06.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci 0000:05:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
>pci 0000:00:07.0: PCI bridge to [bus 05-05]
>pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:07.0:   bridge window [mem 0xfd200000-0xfd2fffff]
>pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 06-06]
>pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff]
>pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]
>pci 0000:00:15.0: PCI bridge to [bus 07-07]
>pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff]
>pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:07.0: setting latency timer to 64
>pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:15.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
>pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
>pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
>pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>pci_bus 0000:04: resource 1 [mem 0xfd600000-0xfd6fffff]
>pci_bus 0000:04: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
>pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:05: resource 1 [mem 0xfd200000-0xfd2fffff]
>pci_bus 0000:05: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
>pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
>pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref]
>pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff]
>pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
>pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
>pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 31824k freed
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>audit: initializing netlink socket (disabled)
>type=2000 audit(1334628355.295:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7891
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 1875k, total 16384k
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Linux agpgart interface v0.103
>brd: module loaded
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
>i8042: If AUX port is really absent please use the 'i8042.noaux' option
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>PM: Checking hibernation image partition /dev/mapper/pdc_bgjciafdap5
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 8:984:55
>rtc_cmos 00:04: setting system clock to 2012-04-17 02:05:56 UTC (1334628356)
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>Freeing unused kernel memory: 728k freed
>Write protecting the kernel read-only data: 8192k
>Freeing unused kernel memory: 1852k freed
>Freeing unused kernel memory: 68k freed
>dracut: dracut-010-7
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
>loop: module loaded
>udevd[169]: starting version 168
>Refined TSC clocksource calibration: 3214.717 MHz.
>Switching to clocksource tsc
>dracut: Starting plymouth daemon
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>r8169 0000:05:00.0: setting latency timer to 64
>r8169 0000:05:00.0: irq 40 for MSI/MSI-X
>r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000061e000, 6c:f0:49:e7:88:c0, XID 083000c0 IRQ 40
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>SCSI subsystem initialized
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>QUIRK: Enable AMD PLL fix
>ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
>firewire_ohci 0000:06:06.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>libata version 3.00 loaded.
>pata_jmicron 0000:07:00.1: enabling device (0000 -> 0001)
>pata_jmicron 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pata_jmicron 0000:07:00.1: setting latency timer to 64
>scsi0 : pata_jmicron
>scsi1 : pata_jmicron
>ata1: PATA max UDMA/100 cmd 0x8f00 ctl 0x8e00 bmdma 0x8b00 irq 17
>ata2: PATA max UDMA/100 cmd 0x8d00 ctl 0x8c00 bmdma 0x8b08 irq 17
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
>usb usb1: SerialNumber: 0000:00:12.0
>firewire_ohci: Added fw-ohci device 0000:06:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 5 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 5 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
>usb usb3: SerialNumber: 0000:00:14.5
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:16.0: OHCI Host Controller
>ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
>usb usb4: SerialNumber: 0000:00:16.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 4 ports detected
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
>usb usb5: SerialNumber: 0000:00:12.2
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
>usb usb6: SerialNumber: 0000:00:13.2
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 5 ports detected
>ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:16.2: EHCI Host Controller
>ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:16.2: debug port 1
>ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
>ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
>usb usb7: SerialNumber: 0000:00:16.2
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 4 ports detected
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:11.0: irq 41 for MSI/MSI-X
>ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>scsi6 : ahci
>scsi7 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 41
>ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 41
>ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 41
>ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 41
>ata7: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 41
>ata8: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 41
>ahci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:07:00.0: setting latency timer to 64
>scsi8 : ahci
>scsi9 : ahci
>ata9: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe100 irq 17
>ata10: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe180 irq 17
>ata1.00: ATAPI: PIONEER DVD-RW  DVR-111D, 1.23, max UDMA/66
>ata1.01: ATAPI: LITE-ON DVDRW SHW-16H5S, LS0W, max UDMA/66
>ata1.00: configured for UDMA/66
>ata1.01: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.23 PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW SHW-16H5S  LS0W PQ: 0 ANSI: 5
>ata8: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata7: SATA link down (SStatus 0 SControl 300)
>firewire_core: created device fw0: GUID 00023c003100e668, S400
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATA-7: Maxtor 6Y120M0, YAR511W0, max UDMA/133
>ata5.00: 240121728 sectors, multi 0: LBA 
>ata5.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: Maxtor 6L120M0, BANC1E00, max UDMA/133
>ata4.00: 240121728 sectors, multi 0: LBA NCQ (not used)
>ata3.00: ATA-7: Maxtor 6L120M0, BANC1G10, max UDMA/133
>ata3.00: 240121728 sectors, multi 0: LBA NCQ (not used)
>ata4.00: configured for UDMA/133
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
>scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
>ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata10.00: ATA-7: Maxtor 6L120M0, BANC1E00, max UDMA/133
>ata10.00: 240121728 sectors, multi 0: LBA NCQ (not used)
>ata10.00: configured for UDMA/133
>ata9.00: ATA-7: ST3808110AS, 3.AAD, max UDMA/133
>ata9.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata9.00: configured for UDMA/133
>scsi 8:0:0:0: Direct-Access     ATA      ST3808110AS      3.AA PQ: 0 ANSI: 5
>scsi 9:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
>Uniform Multi-Platform E-IDE driver
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 0:0:1:0: Attached scsi CD-ROM sr1
>sd 2:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
>sd 3:0:0:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
>sd 4:0:0:0: [sdc] 240121728 512-byte logical blocks: (122 GB/114 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 8:0:0:0: [sdd] Write Protect is off
>sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 9:0:0:0: [sde] 240121728 512-byte logical blocks: (122 GB/114 GiB)
>sd 9:0:0:0: [sde] Write Protect is off
>sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
>sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: unknown partition table
>sd 4:0:0:0: [sdc] Attached SCSI disk
> sdd: sdd1 sdd2
>sd 8:0:0:0: [sdd] Attached SCSI disk
> sde: sde1
>sd 9:0:0:0: [sde] Attached SCSI disk
> sdb: unknown partition table
>sd 3:0:0:0: [sdb] Attached SCSI disk
> sda: sda1 sda2 < >
>sd 2:0:0:0: [sda] Attached SCSI disk
>usb 1-4: new full speed USB device number 2 using ohci_hcd
>usb 1-4: New USB device found, idVendor=046d, idProduct=0b02
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4: Product: Logitech BT Mini-Receiver
>usb 1-4: Manufacturer: Logitech
>hub 1-4:1.0: USB hub found
>hub 1-4:1.0: 3 ports detected
>usb 2-2: new low speed USB device number 2 using ohci_hcd
>usb 2-2: New USB device found, idVendor=12bd, idProduct=a02f
>usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-2: Product: 5-Axis,12-Button with POV 
>input: 5-Axis,12-Button with POV  as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input0
>generic-usb 0003:12BD:A02F.0001: input,hidraw0: USB HID v1.10 Joystick [5-Axis,12-Button with POV ] on usb-0000:00:13.0-2/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usb 4-3: new low speed USB device number 2 using ohci_hcd
>usb 4-3: New USB device found, idVendor=045e, idProduct=0040
>usb 4-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 4-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
>usb 4-3: Manufacturer: Microsoft
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:16.0/usb4/4-3/4-3:1.0/input/input1
>generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:16.0-3/input0
>usb 1-4.2: new full speed USB device number 3 using ohci_hcd
>usb 1-4.2: New USB device found, idVendor=046d, idProduct=c70e
>usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4.2: Product: Logitech BT Mini-Receiver
>usb 1-4.2: Manufacturer: Logitech
>usb 1-4.2: SerialNumber: 0007617AA439
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2/1-4.2:1.0/input/input2
>generic-usb 0003:046D:C70E.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:12.0-4.2/input0
>usb 1-4.3: new full speed USB device number 4 using ohci_hcd
>usb 1-4.3: New USB device found, idVendor=046d, idProduct=c70a
>usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4.3: Product: Logitech BT Mini-Receiver
>usb 1-4.3: Manufacturer: Logitech
>usb 1-4.3: SerialNumber: 0007617AA439
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3/1-4.3:1.0/input/input3
>generic-usb 0003:046D:C70A.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:12.0-4.3/input0
>dracut: Scanning for dmraid devices 
>dracut: Found dmraid sets:
>dracut: pdc_bgjciafda
>dracut: Activating pdc_bgjciafda
>dracut: RAID set "pdc_bgjciafda" was activated
>dracut: RAID set "pdc_bgjciafda" was not activated
>PM: Marking nosave pages: 0000000000093000 - 0000000000100000
>PM: Marking nosave pages: 00000000cf690000 - 0000000100000000
>PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>PM: Starting manual resume from disk
>PM: Hibernation image partition 252:3 present
>PM: Looking for hibernation image.
>PM: Image not found (code -22)
>PM: Hibernation image not present or could not be loaded.
>EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Checking filesystems
>dracut: fsck -T -t noopts=_netdev -A -a
>dracut: /dev/mapper/pdc_bgjciafdap1: clean, 292562/2031616 files, 2113633/8122857 blocks
>dracut: Remounting /dev/mapper/pdc_bgjciafdap1 with -o ro,acl,relatime
>EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: acl
>dracut: Mounted root filesystem /dev/mapper/pdc_bgjciafdap1
>dracut: Switching root
>Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
>NET: Registered protocol family 10
>systemd[1]: Set hostname to <localhost.localdomain>.
>systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
>systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
>EXT4-fs (dm-1): re-mounted. Opts: acl
>udevd[695]: starting version 168
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:73
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:76
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:77
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:78
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:79
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:80
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:81
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:82
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:83
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:84
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:85
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:86
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:87
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:88
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:89
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:90
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:91
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:92
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:93
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:94
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:95
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:96
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:97
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:98
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:99
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:100
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:101
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:105
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:106
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:107
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:108
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:109
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:110
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:111
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:112
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:113
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:114
>udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:115
>wmi: Mapper loaded
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>ACPI: processor limited to max C-state 1
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 8:0:0:0: Attached scsi generic sg5 type 0
>sd 9:0:0:0: Attached scsi generic sg6 type 0
>xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>xhci_hcd 0000:02:00.0: setting latency timer to 64
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
>xhci_hcd 0000:02:00.0: irq 16, io mem 0xfdcfe000
>xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
>xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: xHCI Host Controller
>usb usb8: Manufacturer: Linux 3.1.10-desktop-2mib xhci_hcd
>usb usb8: SerialNumber: 0000:02:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>xhci_hcd 0000:02:00.0: xHCI Host Controller
>xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
>usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb9: Product: xHCI Host Controller
>usb usb9: Manufacturer: Linux 3.1.10-desktop-2mib xhci_hcd
>usb usb9: SerialNumber: 0000:02:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 9-0:1.0: USB hub found
>hub 9-0:1.0: 2 ports detected
>gameport gameport0: EMU10K1 is pci0000:06:06.1/gameport0, io 0x9e00, speed 793kHz
>SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
>SP5100 TCO timer: mmio address 0xb8fe00 already in use
>usb 8-2: new high speed USB device number 2 using xhci_hcd
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>EDAC MC: Ver: 2.1.0
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>usb 8-2: New USB device found, idVendor=0bb4, idProduct=0ca2
>usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 8-2: Product: Android Phone
>usb 8-2: Manufacturer: HTC
>usb 8-2: SerialNumber: HT0BLRX10488
>AMD64 EDAC driver v3.4.0
>EDAC amd64: DRAM ECC disabled.
>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> (Note that use of the override may cause unknown side effects.)
>mtp-probe[1495]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
>mtp-probe[1036]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3"
>mtp-probe[1006]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
>mtp-probe[1012]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-2"
>mtp-probe[1032]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2"
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>mtp-probe[1012]: bus: 2, device: 2 was not an MTP device
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>mtp-probe[1006]: bus: 4, device: 2 was not an MTP device
>mtp-probe[1032]: bus: 1, device: 3 was not an MTP device
>mtp-probe[1036]: bus: 1, device: 4 was not an MTP device
>mtp-probe[1550]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-2"
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>mtp-probe[1554]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
>mtp-probe[1555]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3"
>mtp-probe[1556]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2"
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>mtp-probe[1550]: bus: 2, device: 2 was not an MTP device
>xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
>mtp-probe[1495]: bus: 8, device: 2 was not an MTP device
>mtp-probe[1559]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
>mtp-probe[1556]: bus: 1, device: 3 was not an MTP device
>mtp-probe[1555]: bus: 1, device: 4 was not an MTP device
>mtp-probe[1554]: bus: 4, device: 2 was not an MTP device
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
>mtp-probe[1559]: bus: 8, device: 2 was not an MTP device
>Initializing USB Mass Storage driver...
>scsi10 : usb-storage 8-2:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver uas
>snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>hda-intel: Using LPIB position fix
>snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
>snd_hda_intel 0000:01:00.1: setting latency timer to 64
>hda-intel: Enable sync_write for stable communication
>HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
>input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input6
>snd_emu10k1 0000:06:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>scsi 10:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
>sd 10:0:0:0: Attached scsi generic sg7 type 0
>sd 10:0:0:0: [sdf] Attached SCSI removable disk
>fuse init (API version 7.17)
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>Disabling lock debugging due to kernel taint
>[fglrx] Maximum main memory to use for locked dma buffers: 3786 MBytes.
>[fglrx]   vendor: 1002 device: 6898 count: 1
>[fglrx] ioport: bar 4, base 0xee00, size: 0x100
>pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:01:00.0: setting latency timer to 64
>[fglrx] Kernel PAT support is enabled
>[fglrx] module loaded - fglrx 8.95.3 [Mar  8 2012] with 1 minors
>ntfs-3g[1801]: Version 2011.4.12 external FUSE 28
>ntfs-3g[1801]: Mounted /dev/sdd2 (Read-Write, label "", NTFS 3.1)
>ntfs-3g[1801]: Cmdline options: rw,noexec,nosuid,nodev,user
>ntfs-3g[1801]: Mount options: rw,noexec,nosuid,nodev,user,allow_other,nonempty,atime,fsname=/dev/sdd2,blkdev,blksize=4096
>ntfs-3g[1801]: Ownership and permissions disabled, configuration type 1
>ntfs-3g[1804]: Version 2011.4.12 external FUSE 28
>ntfs-3g[1804]: Mounted /dev/sde1 (Read-Write, label "", NTFS 3.1)
>ntfs-3g[1804]: Cmdline options: rw,noexec,nosuid,nodev,user
>ntfs-3g[1804]: Mount options: rw,noexec,nosuid,nodev,user,allow_other,nonempty,atime,fsname=/dev/sde1,blkdev,blksize=4096
>ntfs-3g[1804]: Ownership and permissions disabled, configuration type 1
>usb 8-2: USB disconnect, device number 2
>usb 8-2: new high speed USB device number 3 using xhci_hcd
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>usb 8-2: New USB device found, idVendor=0bb4, idProduct=0ca2
>usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 8-2: Product: Android Phone
>usb 8-2: Manufacturer: HTC
>usb 8-2: SerialNumber: HT0BLRX10488
>scsi11 : usb-storage 8-2:1.0
>mtp-probe[1886]: checking bus 8, device 3: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
>mtp-probe[1886]: bus: 8, device: 3 was not an MTP device
>mtp-probe[1888]: checking bus 8, device 3: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
>xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
>mtp-probe[1888]: bus: 8, device: 3 was not an MTP device
>scsi 11:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
>sd 11:0:0:0: Attached scsi generic sg7 type 0
>sd 11:0:0:0: [sdf] Attached SCSI removable disk
>systemd[1]: Job dev-mapper-pdc_bgjciafdap6.device/start timed out.
>systemd[1]: Job fedora-autorelabel.service/start failed with result 'dependency'.
>systemd[1]: Job mandriva-boot-links.service/start failed with result 'dependency'.
>systemd[1]: Job local-fs.target/start failed with result 'dependency'.
>systemd[1]: Triggering OnFailure= dependencies of local-fs.target.
>systemd[1]: Job home.mount/start failed with result 'dependency'.
>systemd[1]: Job dev-mapper-pdc_bgjciafdap6.device/start failed with result 'timeout'.
>systemd[1]: Startup finished in 1s 754ms 75us (kernel) + 5s 839ms 292us (initrd) + 1min 30s 803ms 907us (userspace) = 1min 38s 397ms 274us.

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.10-desktop-2mib (mario@localhost.localdomain) (gcc version 4.6.1 20110627 (Mandriva) (GCC) ) #1 SMP PREEMPT Fri Mar 23 00:35:29 CET 2012
Command line: BOOT_IMAGE=linux root=/dev/mapper/pdc_bgjciafdap1 nokmsboot logo.nologo quiet resume=/dev/mapper/pdc_bgjciafdap5 splash=silent vga=788
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000093c00 (usable)
 BIOS-e820: 0000000000093c00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cf690000 (usable)
 BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
 BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
 BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-890FXA-UD5/GA-890FXA-UD5, BIOS F6 11/24/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFFE0000000 write-back
  5 base 000120000000 mask FFFFF0000000 write-back
  6 disabled
  7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf690 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f46f0] f46f0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000008e000] 8e000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cf690000
 0000000000 - 00c0000000 page 1G
 00c0000000 - 00cf600000 page 2M
 00cf600000 - 00cf690000 page 4k
kernel direct mapping tables up to cf690000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000130000000
 0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ cf68e000-cf690000
RAMDISK: 360dc000 - 37ff0000
ACPI: RSDP 00000000000f6100 00014 (v00 GBT   )
ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdf1080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdf1100 07BE3 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfdf0000 00040
ACPI: SSDT 00000000cfdf8dc0 00EDC (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000cfdf9cc0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdf9d00 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdf9d40 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000cfdf9db0 00202 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfdf8d00 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Initmem setup node 0 0000000000000000-0000000130000000
  NODE_DATA [000000012fffb000 - 000000012fffffff]
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x00000093
    0: 0x00000100 -> 0x000cf690
    0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1046035
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3902 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 829136 pages, LIFO batch:31
  Normal zone: 3072 pages used for memmap
  Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000093000 - 0000000000094000
PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf690000 - 00000000cfdf0000
PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88012fc00000 s76224 r8192 d22080 u262144
pcpu-alloc: s76224 r8192 d22080 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1026574
Policy zone: Normal
Kernel command line: BOOT_IMAGE=linux root=/dev/mapper/pdc_bgjciafdap1 nokmsboot logo.nologo quiet resume=/dev/mapper/pdc_bgjciafdap5 splash=silent vga=788
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ e46000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 3942892k/4980736k available (4272k kernel code, 796596k absent, 241248k reserved, 5168k data, 728k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:2304
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3214.933 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.86 BogoMIPS (lpj=3214933)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110623
ftrace: allocating 16670 entries in 66 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
System has AMD C1E enabled
Switch to broadcast mode on CPU0
MCE: In-kernel MCE decoding enabled.
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 8e000
Switch to broadcast mode on CPU1
 #2
smpboot cpu 2: start_ip = 8e000
Switch to broadcast mode on CPU2
 #3
smpboot cpu 3: start_ip = 8e000
Switch to broadcast mode on CPU3
 #4
smpboot cpu 4: start_ip = 8e000
Switch to broadcast mode on CPU4
 #5
smpboot cpu 5: start_ip = 8e000
Brought up 6 CPUs
Total of 6 processors activated (38576.84 BogoMIPS).
Switch to broadcast mode on CPU5
devtmpfs: initialized
PM: Registering ACPI NVS region at cfdf0000 (4096 bytes)
RTC time:  2:05:55, date: 04/17/12
NET: Registered protocol family 16
node 0 link 0: io port [8000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [e0000000, e07fffff] ==> [e0100000, e07fffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0800000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe07fffff]
bus: 00 index 5 [mem 0x130000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI: Actual Package length (1) is larger than NumElements field (0), truncated

ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110623/tbutils-314)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: [1002:4392] type 0 class 0x000104
pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
pci 0000:00:15.0: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:00.0: [1002:6898] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
pci 0000:01:00.0: reg 20: [io  0xee00-0xeeff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa50] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:02:00.0: reg 10: [mem 0xfdcfe000-0xfdcfffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:06.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [io  0xae00-0xaeff]
pci 0000:05:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:06:06.0: [1102:0004] type 0 class 0x000401
pci 0000:06:06.0: reg 10: [io  0x9f00-0x9f1f]
pci 0000:06:06.0: supports D1 D2
pci 0000:06:06.1: [1102:7003] type 0 class 0x000980
pci 0000:06:06.1: reg 10: [io  0x9e00-0x9e07]
pci 0000:06:06.1: supports D1 D2
pci 0000:06:06.2: [1102:4001] type 0 class 0x000c00
pci 0000:06:06.2: reg 10: [mem 0xfd8ff000-0xfd8ff7ff]
pci 0000:06:06.2: reg 14: [mem 0xfd8f8000-0xfd8fbfff]
pci 0000:06:06.2: supports D1 D2
pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:06.2: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:07:00.0: [197b:2363] type 0 class 0x000101
pci 0000:07:00.0: reg 24: [mem 0xfd5fe000-0xfd5fffff]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.1: [197b:2363] type 0 class 0x000101
pci 0000:07:00.1: reg 10: [io  0x8f00-0x8f07]
pci 0000:07:00.1: reg 14: [io  0x8e00-0x8e03]
pci 0000:07:00.1: reg 18: [io  0x8d00-0x8d07]
pci 0000:07:00.1: reg 1c: [io  0x8c00-0x8c03]
pci 0000:07:00.1: reg 20: [io  0x8b00-0x8b0f]
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:15.0: PCI bridge to [bus 07-07]
pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000093c00 - 000000000009ffff 
reserve RAM buffer: 00000000cf690000 - 00000000cfffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #4
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #5
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0220-0x0225]
pnp 00:01: [io  0x0290-0x0294]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0900-0x091f]
pnp 00:02: [io  0x0228-0x022f]
pnp 00:02: [io  0x040b]
pnp 00:02: [io  0x04d6]
pnp 00:02: [io  0x0c00-0x0c01]
pnp 00:02: [io  0x0c14]
pnp 00:02: [io  0x0c50-0x0c52]
pnp 00:02: [io  0x0c6c-0x0c6d]
pnp 00:02: [io  0x0c6f]
pnp 00:02: [io  0x0cd0-0x0cd1]
pnp 00:02: [io  0x0cd2-0x0cd3]
pnp 00:02: [io  0x0cd4-0x0cdf]
pnp 00:02: [io  0x0800-0x08fe]
pnp 00:02: [io  0x0a10-0x0a17]
pnp 00:02: [io  0x0b00-0x0b0f]
pnp 00:02: [io  0x0b10-0x0b1f]
pnp 00:02: [io  0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:02: [io  0x0900-0x091f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x0800-0x08fe] has been reserved
system 00:02: [io  0x0a10-0x0a17] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [mem 0xe0000000-0xefffffff]
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0x000db000-0x000dbfff]
pnp 00:08: [mem 0x000f0000-0x000f7fff]
pnp 00:08: [mem 0x000f8000-0x000fbfff]
pnp 00:08: [mem 0x000fc000-0x000fffff]
pnp 00:08: [mem 0xcfdf0000-0xcfdfffff]
pnp 00:08: [mem 0xffff0000-0xffffffff]
pnp 00:08: [mem 0x00000000-0x0009ffff]
pnp 00:08: [mem 0x00100000-0xcfdeffff]
pnp 00:08: [mem 0xcfe00000-0xcfefffff]
pnp 00:08: [mem 0xcff00000-0xcfffffff]
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
pnp 00:08: [mem 0xfff80000-0xfffeffff]
pnp 00:08: disabling [mem 0x000db000-0x000dbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:04.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:05.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:06.0:   bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xfd200000-0xfd2fffff]
pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06-06]
pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]
pci 0000:00:15.0: PCI bridge to [bus 07-07]
pci 0000:00:15.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:15.0:   bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:00:15.0:   bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:15.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:04: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfd200000-0xfd2fffff]
pci_bus 0000:05: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31824k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1334628355.295:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7891
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 1875k, total 16384k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/mapper/pdc_bgjciafdap5
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 8:984:55
rtc_cmos 00:04: setting system clock to 2012-04-17 02:05:56 UTC (1334628356)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 728k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1852k freed
Freeing unused kernel memory: 68k freed
dracut: dracut-010-7
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
loop: module loaded
udevd[169]: starting version 168
Refined TSC clocksource calibration: 3214.717 MHz.
Switching to clocksource tsc
dracut: Starting plymouth daemon
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:05:00.0: setting latency timer to 64
r8169 0000:05:00.0: irq 40 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168d/8111d at 0xffffc9000061e000, 6c:f0:49:e7:88:c0, XID 083000c0 IRQ 40
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
firewire_ohci 0000:06:06.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
libata version 3.00 loaded.
pata_jmicron 0000:07:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:07:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0x8f00 ctl 0x8e00 bmdma 0x8b00 irq 17
ata2: PATA max UDMA/100 cmd 0x8d00 ctl 0x8c00 bmdma 0x8b08 irq 17
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
usb usb1: SerialNumber: 0000:00:12.0
firewire_ohci: Added fw-ohci device 0000:06:06.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
usb usb3: SerialNumber: 0000:00:14.5
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.10-desktop-2mib ohci_hcd
usb usb4: SerialNumber: 0000:00:16.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.1.10-desktop-2mib ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: irq 41 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 41
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 41
ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 41
ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 41
ata7: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 41
ata8: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 41
ahci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ahci 0000:07:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe100 irq 17
ata10: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe180 irq 17
ata1.00: ATAPI: PIONEER DVD-RW  DVR-111D, 1.23, max UDMA/66
ata1.01: ATAPI: LITE-ON DVDRW SHW-16H5S, LS0W, max UDMA/66
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/66
scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.23 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW SHW-16H5S  LS0W PQ: 0 ANSI: 5
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
firewire_core: created device fw0: GUID 00023c003100e668, S400
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: Maxtor 6Y120M0, YAR511W0, max UDMA/133
ata5.00: 240121728 sectors, multi 0: LBA 
ata5.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: Maxtor 6L120M0, BANC1E00, max UDMA/133
ata4.00: 240121728 sectors, multi 0: LBA NCQ (not used)
ata3.00: ATA-7: Maxtor 6L120M0, BANC1G10, max UDMA/133
ata3.00: 240121728 sectors, multi 0: LBA NCQ (not used)
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10.00: ATA-7: Maxtor 6L120M0, BANC1E00, max UDMA/133
ata10.00: 240121728 sectors, multi 0: LBA NCQ (not used)
ata10.00: configured for UDMA/133
ata9.00: ATA-7: ST3808110AS, 3.AAD, max UDMA/133
ata9.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata9.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access     ATA      ST3808110AS      3.AA PQ: 0 ANSI: 5
scsi 9:0:0:0: Direct-Access     ATA      Maxtor 6L120M0   BANC PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
sd 2:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 3:0:0:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 4:0:0:0: [sdc] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sde] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 9:0:0:0: [sde] Write Protect is off
sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: unknown partition table
sd 4:0:0:0: [sdc] Attached SCSI disk
 sdd: sdd1 sdd2
sd 8:0:0:0: [sdd] Attached SCSI disk
 sde: sde1
sd 9:0:0:0: [sde] Attached SCSI disk
 sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2 < >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-4: new full speed USB device number 2 using ohci_hcd
usb 1-4: New USB device found, idVendor=046d, idProduct=0b02
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Logitech BT Mini-Receiver
usb 1-4: Manufacturer: Logitech
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 2-2: new low speed USB device number 2 using ohci_hcd
usb 2-2: New USB device found, idVendor=12bd, idProduct=a02f
usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-2: Product: 5-Axis,12-Button with POV 
input: 5-Axis,12-Button with POV  as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input0
generic-usb 0003:12BD:A02F.0001: input,hidraw0: USB HID v1.10 Joystick [5-Axis,12-Button with POV ] on usb-0000:00:13.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-3: new low speed USB device number 2 using ohci_hcd
usb 4-3: New USB device found, idVendor=045e, idProduct=0040
usb 4-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 4-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 4-3: Manufacturer: Microsoft
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:16.0/usb4/4-3/4-3:1.0/input/input1
generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:16.0-3/input0
usb 1-4.2: new full speed USB device number 3 using ohci_hcd
usb 1-4.2: New USB device found, idVendor=046d, idProduct=c70e
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.2: Product: Logitech BT Mini-Receiver
usb 1-4.2: Manufacturer: Logitech
usb 1-4.2: SerialNumber: 0007617AA439
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2/1-4.2:1.0/input/input2
generic-usb 0003:046D:C70E.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:12.0-4.2/input0
usb 1-4.3: new full speed USB device number 4 using ohci_hcd
usb 1-4.3: New USB device found, idVendor=046d, idProduct=c70a
usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.3: Product: Logitech BT Mini-Receiver
usb 1-4.3: Manufacturer: Logitech
usb 1-4.3: SerialNumber: 0007617AA439
input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3/1-4.3:1.0/input/input3
generic-usb 0003:046D:C70A.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:12.0-4.3/input0
dracut: Scanning for dmraid devices 
dracut: Found dmraid sets:
dracut: pdc_bgjciafda
dracut: Activating pdc_bgjciafda
dracut: RAID set "pdc_bgjciafda" was activated
dracut: RAID set "pdc_bgjciafda" was not activated
PM: Marking nosave pages: 0000000000093000 - 0000000000100000
PM: Marking nosave pages: 00000000cf690000 - 0000000100000000
PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 252:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Checking filesystems
dracut: fsck -T -t noopts=_netdev -A -a
dracut: /dev/mapper/pdc_bgjciafdap1: clean, 292562/2031616 files, 2113633/8122857 blocks
dracut: Remounting /dev/mapper/pdc_bgjciafdap1 with -o ro,acl,relatime
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: acl
dracut: Mounted root filesystem /dev/mapper/pdc_bgjciafdap1
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
NET: Registered protocol family 10
systemd[1]: Set hostname to <localhost.localdomain>.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
EXT4-fs (dm-1): re-mounted. Opts: acl
udevd[695]: starting version 168
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:73
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:76
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:77
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:78
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:79
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:80
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:81
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:82
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:83
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:84
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:85
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:86
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:87
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:88
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:89
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:90
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:91
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:92
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:93
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:94
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:95
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:96
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:97
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:98
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:99
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:100
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:101
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:105
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:106
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:107
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:108
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:109
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:110
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:111
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:112
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:113
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:114
udevd[695]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/49-hso-udev.rules:115
wmi: Mapper loaded
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
sr 0:0:0:0: Attached scsi generic sg0 type 5
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 9:0:0:0: Attached scsi generic sg6 type 0
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 16, io mem 0xfdcfe000
xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.1.10-desktop-2mib xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.1.10-desktop-2mib xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
gameport gameport0: EMU10K1 is pci0000:06:06.1/gameport0, io 0x9e00, speed 793kHz
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xb8fe00 already in use
usb 8-2: new high speed USB device number 2 using xhci_hcd
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
EDAC MC: Ver: 2.1.0
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
usb 8-2: New USB device found, idVendor=0bb4, idProduct=0ca2
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: Android Phone
usb 8-2: Manufacturer: HTC
usb 8-2: SerialNumber: HT0BLRX10488
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
mtp-probe[1495]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
mtp-probe[1036]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3"
mtp-probe[1006]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
mtp-probe[1012]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-2"
mtp-probe[1032]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2"
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
mtp-probe[1012]: bus: 2, device: 2 was not an MTP device
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
mtp-probe[1006]: bus: 4, device: 2 was not an MTP device
mtp-probe[1032]: bus: 1, device: 3 was not an MTP device
mtp-probe[1036]: bus: 1, device: 4 was not an MTP device
mtp-probe[1550]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb2/2-2"
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
mtp-probe[1554]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:16.0/usb4/4-3"
mtp-probe[1555]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.3"
mtp-probe[1556]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb1/1-4/1-4.2"
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
mtp-probe[1550]: bus: 2, device: 2 was not an MTP device
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
mtp-probe[1495]: bus: 8, device: 2 was not an MTP device
mtp-probe[1559]: checking bus 8, device 2: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
mtp-probe[1556]: bus: 1, device: 3 was not an MTP device
mtp-probe[1555]: bus: 1, device: 4 was not an MTP device
mtp-probe[1554]: bus: 4, device: 2 was not an MTP device
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
mtp-probe[1559]: bus: 8, device: 2 was not an MTP device
Initializing USB Mass Storage driver...
scsi10 : usb-storage 8-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
hda-intel: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
hda-intel: Enable sync_write for stable communication
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input6
snd_emu10k1 0000:06:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi 10:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdf] Attached SCSI removable disk
fuse init (API version 7.17)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3786 MBytes.
[fglrx]   vendor: 1002 device: 6898 count: 1
[fglrx] ioport: bar 4, base 0xee00, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.95.3 [Mar  8 2012] with 1 minors
ntfs-3g[1801]: Version 2011.4.12 external FUSE 28
ntfs-3g[1801]: Mounted /dev/sdd2 (Read-Write, label "", NTFS 3.1)
ntfs-3g[1801]: Cmdline options: rw,noexec,nosuid,nodev,user
ntfs-3g[1801]: Mount options: rw,noexec,nosuid,nodev,user,allow_other,nonempty,atime,fsname=/dev/sdd2,blkdev,blksize=4096
ntfs-3g[1801]: Ownership and permissions disabled, configuration type 1
ntfs-3g[1804]: Version 2011.4.12 external FUSE 28
ntfs-3g[1804]: Mounted /dev/sde1 (Read-Write, label "", NTFS 3.1)
ntfs-3g[1804]: Cmdline options: rw,noexec,nosuid,nodev,user
ntfs-3g[1804]: Mount options: rw,noexec,nosuid,nodev,user,allow_other,nonempty,atime,fsname=/dev/sde1,blkdev,blksize=4096
ntfs-3g[1804]: Ownership and permissions disabled, configuration type 1
usb 8-2: USB disconnect, device number 2
usb 8-2: new high speed USB device number 3 using xhci_hcd
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
usb 8-2: New USB device found, idVendor=0bb4, idProduct=0ca2
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: Android Phone
usb 8-2: Manufacturer: HTC
usb 8-2: SerialNumber: HT0BLRX10488
scsi11 : usb-storage 8-2:1.0
mtp-probe[1886]: checking bus 8, device 3: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
mtp-probe[1886]: bus: 8, device: 3 was not an MTP device
mtp-probe[1888]: checking bus 8, device 3: "/sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-2"
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
mtp-probe[1888]: bus: 8, device: 3 was not an MTP device
scsi 11:0:0:0: Direct-Access     HTC      Android Phone    0100 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg7 type 0
sd 11:0:0:0: [sdf] Attached SCSI removable disk
systemd[1]: Job dev-mapper-pdc_bgjciafdap6.device/start timed out.
systemd[1]: Job fedora-autorelabel.service/start failed with result 'dependency'.
systemd[1]: Job mandriva-boot-links.service/start failed with result 'dependency'.
systemd[1]: Job local-fs.target/start failed with result 'dependency'.
systemd[1]: Triggering OnFailure= dependencies of local-fs.target.
systemd[1]: Job home.mount/start failed with result 'dependency'.
systemd[1]: Job dev-mapper-pdc_bgjciafdap6.device/start failed with result 'timeout'.
systemd[1]: Startup finished in 1s 754ms 75us (kernel) + 5s 839ms 292us (initrd) + 1min 30s 803ms 907us (userspace) = 1min 38s 397ms 274us.

Actions: View

Attachments on bug 5425: 2007