Attachment 1811 Details for Bug 5031 – Dmesg, for kernel 3.2.9

Dmesg, for kernel 3.2.9

dmesg-kernel3.2.9.txt (text/plain), 38.07 KB, created by papoteur on 2012-03-21 16:25:44 CET

(hide)

Description:

Filename:

MIME Type:

Creator: papoteur

Created: 2012-03-21 16:25:44 CET

Size: 38.07 KB

patch

obsolete

>Initializing cgroup subsys cpu
>Linux version 3.2.9-0.rt16.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT RT Tue Mar 6 13:29:42 UTC 2012
>BIOS-provided physical RAM map:
>BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
>BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
>BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
>BIOS-e820: 000000003f69e000 - 000000003f6e0000 (ACPI NVS)
>BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved)
>BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI present.
>DMI: ASUSTeK Computer INC. 1005PE/1005P, BIOS 1202 06/23/2010
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x3f690 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>00000-9FFFF write-back
>A0000-BFFFF uncachable
>C0000-CFFFF write-protect
>D0000-DFFFF uncachable
>E0000-EFFFF write-through
>F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>0 base 000000000 mask 0C0000000 write-back
>1 base 03F700000 mask 0FFF00000 uncachable
>2 base 03F800000 mask 0FF800000 uncachable
>3 disabled
>4 disabled
>5 disabled
>6 disabled
>7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [c00ff780] ff780
>initial memory mapped : 0 - 00c00000
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: 0000000000000000-00000000377fe000
>0000000000 - 0000400000 page 4k
>0000400000 - 0037400000 page 2M
>0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ bfb000-c00000
>RAMDISK: 37a72000 - 37ff0000
>Allocated new RAMDISK: 37280000 - 377fd1ad
>Move RAMDISK from 0000000037a72000 - 0000000037fef1ac to 37280000 - 377fd1ac
>ACPI: RSDP 000fbf40 00024 (v02 ACPIAM)
>ACPI: XSDT 3f690100 0006C (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
>ACPI: FACP 3f690290 000F4 (v04 A_M_I_ OEMFACP 06001023 MSFT 00000097)
>ACPI: DSDT 3f690490 08BDE (v02 A1414 A1414000 00000000 INTL 20060113)
>ACPI: FACS 3f69e000 00040
>ACPI: APIC 3f690390 0005C (v02 A_M_I_ OEMAPIC 06001023 MSFT 00000097)
>ACPI: MCFG 3f6903f0 0003C (v01 A_M_I_ OEMMCFG 06001023 MSFT 00000097)
>ACPI: ECDT 3f690430 00055 (v01 A_M_I_ OEMECDT 06001023 MSFT 00000097)
>ACPI: OEMB 3f69e040 00061 (v01 A_M_I_ AMI_OEM 06001023 MSFT 00000097)
>ACPI: HPET 3f699070 00038 (v01 A_M_I_ OEMHPET 06001023 MSFT 00000097)
>ACPI: GSCI 3f69e0b0 02024 (v01 A_M_I_ GMCHSCI 06001023 MSFT 00000097)
>ACPI: SSDT 3f6a0c80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
>ACPI: SLIC 3f6990b0 00176 (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>126MB HIGHMEM available.
>887MB LOWMEM available.
>mapped low ram: 0 - 377fe000
>low ram: 0 - 377fe000
>Zone PFN ranges:
>DMA 0x00000010 -> 0x00001000
>Normal 0x00001000 -> 0x000377fe
>HighMem 0x000377fe -> 0x0003f690
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>0: 0x00000010 -> 0x0000009f
>0: 0x00000100 -> 0x0003f690
>On node 0 totalpages: 259615
>free_area_init_node: node 0, pgdat c06a2200, node_mem_map f6a8f200
>DMA zone: 32 pages used for memmap
>DMA zone: 0 pages reserved
>DMA zone: 3951 pages, LIFO batch:0
>Normal zone: 1744 pages used for memmap
>Normal zone: 221486 pages, LIFO batch:31
>HighMem zone: 254 pages used for memmap
>HighMem zone: 32148 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
>PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
>Allocating PCI resources starting at 3f700000 (gap: 3f700000:bf700000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @f6400000 s31744 r0 d21504 u2097152
>pcpu-alloc: s31744 r0 d21504 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1
>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585
>Kernel command line: BOOT_IMAGE=2_3.2.9-0.rt16.1.mga root=UUID=7dd3f555-146b-4d9c-a198-929ce4084070 resume=UUID=1e146fcf-1557-46c2-aa59-80febddc0be2 splash=silent vga=788
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0003f690)
>Memory: 1016768k/1038912k available (3799k kernel code, 21692k reserved, 2019k data, 564k init, 129608k highmem)
>virtual kernel memory layout:
>fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
>pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
>lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
>.init : 0xc06af000 - 0xc073c000 ( 564 kB)
>.data : 0xc04b5e70 - 0xc06aee40 (2019 kB)
>.text : 0xc0100000 - 0xc04b5e70 (3799 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Preemptible hierarchical RCU implementation.
>NR_IRQS:2304 nr_irqs:512 16
>CPU 0 irqstacks, hard=f6008000 soft=f600a000
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1666.453 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.90 BogoMIPS (lpj=1666453)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20110623
>ftrace: allocating 16471 entries in 33 pages
>Enabling APIC mode: Flat. Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
>Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
>... version: 3
>... bit width: 40
>... generic registers: 2
>... value mask: 000000ffffffffff
>... max period: 000000007fffffff
>... fixed-purpose events: 3
>... event mask: 0000000700000003
>CPU 1 irqstacks, hard=f60f6000 soft=f60f8000
>Booting Node 0, Processors #1 Ok.
>smpboot cpu 1: start_ip = 9b000
>Initializing CPU#1
>Disabled fast string operations
>Brought up 2 CPUs
>Total of 2 processors activated (6665.73 BogoMIPS).
>devtmpfs: initialized
>PM: Registering ACPI NVS region at 3f69e000 (270336 bytes)
>RTC time: 15:01:14, date: 03/21/12
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT 3f6a0190 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
>ACPI: SSDT 3f6a0550 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
>ACPI: SSDT 3f6a00e0 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
>ACPI: SSDT 3f6a04c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xfed8ffff]
>pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
>pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
>pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
>pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
>pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
>pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
>pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
>pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
>pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
>pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
>pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
>pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
>pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
>pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
>pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f]
>pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
>pci 0000:00:1c.0: PCI bridge to [bus 04-04]
>pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
>pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.1: PCI bridge to [bus 02-03]
>pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
>pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
>pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
>pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
>pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.3: PCI bridge to [bus 01-01]
>pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
>pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
>pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>pci0000:00: Requesting ACPI _OSC control (0x1d)
>pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff
>reserve RAM buffer: 000000003f690000 - 000000003fffffff
>NetLabel: Initializing
>NetLabel: domain hash size = 128
>NetLabel: protocols = UNLABELED CIPSOv4
>NetLabel: unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io 0x0cf8-0x0cff]
>pnp 00:00: [io 0x0000-0x0cf7 window]
>pnp 00:00: [io 0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x3f700000-0xfed8ffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed14000-0xfed19fff]
>pnp 00:01: [mem 0xfed90000-0xfed93fff]
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io 0x0000-0x000f]
>pnp 00:02: [io 0x0081-0x0083]
>pnp 00:02: [io 0x0087]
>pnp 00:02: [io 0x0089-0x008b]
>pnp 00:02: [io 0x008f]
>pnp 00:02: [io 0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io 0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io 0x0060]
>pnp 00:04: [io 0x0064]
>pnp 00:04: [irq 1]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:05: [irq 12]
>pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
>pnp 00:06: [io 0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io 0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [io 0x0010-0x001f]
>pnp 00:08: [io 0x0022-0x003f]
>pnp 00:08: [io 0x0044-0x004d]
>pnp 00:08: [io 0x0050-0x005e]
>pnp 00:08: [io 0x0063]
>pnp 00:08: [io 0x0065]
>pnp 00:08: [io 0x0067-0x006f]
>pnp 00:08: [io 0x0072-0x007f]
>pnp 00:08: [io 0x0080]
>pnp 00:08: [io 0x0084-0x0086]
>pnp 00:08: [io 0x0088]
>pnp 00:08: [io 0x008c-0x008e]
>pnp 00:08: [io 0x0090-0x009f]
>pnp 00:08: [io 0x00a2-0x00bf]
>pnp 00:08: [io 0x00e0-0x00ef]
>pnp 00:08: [io 0x025c-0x025f]
>pnp 00:08: [io 0x0380-0x0383]
>pnp 00:08: [io 0x0400-0x041f]
>pnp 00:08: [io 0x04d0-0x04d1]
>pnp 00:08: [io 0x0800-0x087f]
>pnp 00:08: [io 0x0400-0x03ff disabled]
>pnp 00:08: [io 0x0480-0x04bf]
>pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:08: [mem 0xfed20000-0xfed3ffff]
>pnp 00:08: [mem 0xfed50000-0xfed8ffff]
>pnp 00:08: [mem 0xffb00000-0xffbfffff]
>pnp 00:08: [mem 0xfff00000-0xffffffff]
>system 00:08: [io 0x025c-0x025f] has been reserved
>system 00:08: [io 0x0380-0x0383] has been reserved
>system 00:08: [io 0x0400-0x041f] has been reserved
>system 00:08: [io 0x04d0-0x04d1] has been reserved
>system 00:08: [io 0x0800-0x087f] has been reserved
>system 00:08: [io 0x0480-0x04bf] has been reserved
>system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
>system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [mem 0xfed00000-0xfed003ff]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0a: [mem 0xfec00000-0xfec00fff]
>pnp 00:0a: [mem 0xfee00000-0xfee00fff]
>system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0xe0000000-0xefffffff]
>system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0x00000000-0x0009ffff]
>pnp 00:0c: [mem 0x000c0000-0x000cffff]
>pnp 00:0c: [mem 0x000e0000-0x000fffff]
>pnp 00:0c: [mem 0x00100000-0x3f6fffff]
>pnp 00:0c: [mem 0xfed90000-0xffffffff]
>system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0c: [mem 0x00100000-0x3f6fffff] could not be reserved
>system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.3: BAR 15: assigned [mem 0x3f700000-0x3f8fffff 64bit pref]
>pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
>pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f900000-0x3fafffff]
>pci 0000:00:1c.0: BAR 15: assigned [mem 0x3fb00000-0x3fcfffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
>pci 0000:00:1c.0: PCI bridge to [bus 04-04]
>pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
>pci 0000:00:1c.0: bridge window [mem 0x3f900000-0x3fafffff]
>pci 0000:00:1c.0: bridge window [mem 0x3fb00000-0x3fcfffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-03]
>pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
>pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
>pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 01-01]
>pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
>pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
>pci 0000:00:1c.3: bridge window [mem 0x3f700000-0x3f8fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 05-05]
>pci 0000:00:1c.0: enabling device (0104 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: enabling device (0106 -> 0107)
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff]
>pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
>pci_bus 0000:04: resource 1 [mem 0x3f900000-0x3fafffff]
>pci_bus 0000:04: resource 2 [mem 0x3fb00000-0x3fcfffff 64bit pref]
>pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
>pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
>pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
>pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
>pci_bus 0000:01: resource 2 [mem 0x3f700000-0x3f8fffff 64bit pref]
>pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
>pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
>pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT A disabled
>pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1d.1: PCI INT B disabled
>pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1d.2: PCI INT C disabled
>pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1d.3: PCI INT D disabled
>pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.7: PCI INT A disabled
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 5624k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1332342074.578:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1743
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 8128k
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>intel_idle: MWAIT substates: 0x20220
>intel_idle: v0.4 model 0x1C
>intel_idle: lapic_timer_reliable_states 0x2
>Marking TSC unstable due to TSC halts in idle states deeper than C2
>ERST: Table is not found!
>GHES: HEST is not enabled!
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>PM: Checking hibernation image partition UUID=1e146fcf-1557-46c2-aa59-80febddc0be2
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>Magic number: 4:112:33
>rtc_cmos 00:03: setting system clock to 2012-03-21 15:01:15 UTC (1332342075)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>Freeing unused kernel memory: 564k freed
>Write protecting the kernel text: 3800k
>Write protecting the kernel read-only data: 1676k
>dracut: dracut-017-1.mga2
>udevd[89]: starting version 181
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 43 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>composite sync not supported
>[drm] initialized overlay support
>composite sync not supported
>checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
>fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
>render error detected, EIR: 0x00000010
>page table error
>PGTBL_ER: 0x00000002
>[drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
>render error detected, EIR: 0x00000010
>page table error
>PGTBL_ER: 0x00000002
>psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
>Console: switching to colour dummy device 80x25
>fbcon: inteldrmfb (fb0) is primary device
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>Console: switching to colour frame buffer device 128x37
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>ACPI Warning: _BQC returned an invalid level (20110623/video-472)
>acpi device:0e: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>composite sync not supported
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>SCSI subsystem initialized
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 44
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>usb 5-5: new high-speed USB device number 2 using ehci_hcd
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: unexpected _GTF length (8)
>ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60N, max UDMA/133
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: unexpected _GTF length (8)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
>usb 5-5: New USB device found, idVendor=058f, idProduct=6335
>usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-5: Product: Mass Storage Device
>usb 5-5: Manufacturer: Generic
>usb 5-5: SerialNumber: 058F63356336
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Initializing USB Mass Storage driver...
>scsi4 : usb-storage 5-5:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>sda: sda1 < sda5 sda6 > sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 5-6: new high-speed USB device number 3 using ehci_hcd
>usbcore: registered new interface driver uas
>usb 5-6: New USB device found, idVendor=13d3, idProduct=5111
>usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
>usb 5-6: Product: USB2.0 UVC VGA WebCam
>usb 5-6: Manufacturer: Image Processor
>usb 5-6: SerialNumber: USB2.0 UVC VGA WebCam
>PM: Starting manual resume from disk
>PM: Hibernation image partition 8:2 present
>PM: Looking for hibernation image.
>PM: Image not found (code -22)
>PM: Hibernation image not present or could not be loaded.
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Checking ext4: /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070
>dracut: issuing e2fsck -a /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070
>dracut: /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070: clean, 135506/610800 files, 1148297/2441856 blocks
>dracut: Remounting /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070 with -o acl,noatime,ro
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
>dracut: Mounted root filesystem /dev/sda5
>scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
>dracut: Switching root
>Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
>sd 4:0:0:0: [sdb] 32104448 512-byte logical blocks: (16.4 GB/15.3 GiB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sdb] No Caching mode page present
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] No Caching mode page present
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sdb: sdb1
>sd 4:0:0:0: [sdb] No Caching mode page present
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>NET: Registered protocol family 10
>udevd[290]: starting version 181
>EXT4-fs (sda5): re-mounted. Opts: acl
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>iTCO_vendor_support: vendor-support=0
>atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>atl1c 0000:01:00.0: setting latency timer to 64
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (60 C)
>Non-volatile memory driver v1.3
>atl1c 0000:01:00.0: version 1.0.1.0-NAPI
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
>iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>wmi: Mapper loaded
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [AC0] (off-line)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>cfg80211: Calling CRDA to update world regulatory domain
>asus_wmi: ASUS WMI generic driver loaded
>Linux media interface: v0.10
>ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ath9k 0000:02:00.0: setting latency timer to 64
>Linux video capture interface: v2.00
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>hda_intel: position_fix set to 1 for device 1043:83ce
>snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>ath: EEPROM regdomain: 0x60
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x60
>asus_wmi: Initialization: 0x0
>asus_wmi: BIOS WMI version: 0.6
>asus_wmi: SFUN value: 0x0
>input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
>asus_wmi: Backlight controlled by ACPI video driver
>SKU: Nid=0x1d sku_cfg=0x4005822d
>SKU: port_connectivity=0x1
>SKU: enable_pcbeep=0x0
>SKU: check_sum=0x00000005
>SKU: customization=0x00000082
>SKU: external_amp=0x5
>SKU: platform_type=0x1
>SKU: swap=0x0
>SKU: override=0x1
>autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>mono: mono_out=0x0
>inputs: Internal Mic=0x12 Mic=0x18
>realtek: No valid SSID, checking pincfg 0x4005822d for NID 0x1d
>realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
>input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
>Registered led device: ath9k-phy0
>ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8320000, irq=17
>uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5111)
>input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0/input/input10
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (1.1.1)
>cfg80211: World regulatory domain updated:
>cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: Calling CRDA for country: FR
>cfg80211: Regulatory domain changed to country: FR
>cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Adding 2377616k swap on /dev/sda2. Priority:0 extents:1 across:2377616k
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>wlan0: direct probe to 62:75:fc:fe:29:18 (try 1/3)
>wlan0: direct probe responded
>wlan0: authenticate with 62:75:fc:fe:29:18 (try 1)
>wlan0: authenticated
>wlan0: associate with 62:75:fc:fe:29:18 (try 1)
>wlan0: RX AssocResp from 62:75:fc:fe:29:18 (capab=0x11 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl

Initializing cgroup subsys cpu
Linux version 3.2.9-0.rt16.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT RT Tue Mar 6 13:29:42 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
BIOS-e820: 000000003f69e000 - 000000003f6e0000 (ACPI NVS)
BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
DMI: ASUSTeK Computer INC. 1005PE/1005P, BIOS 1202 06/23/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3f690 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F700000 mask 0FFF00000 uncachable
2 base 03F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ bfb000-c00000
RAMDISK: 37a72000 - 37ff0000
Allocated new RAMDISK: 37280000 - 377fd1ad
Move RAMDISK from 0000000037a72000 - 0000000037fef1ac to 37280000 - 377fd1ac
ACPI: RSDP 000fbf40 00024 (v02 ACPIAM)
ACPI: XSDT 3f690100 0006C (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
ACPI: FACP 3f690290 000F4 (v04 A_M_I_ OEMFACP 06001023 MSFT 00000097)
ACPI: DSDT 3f690490 08BDE (v02 A1414 A1414000 00000000 INTL 20060113)
ACPI: FACS 3f69e000 00040
ACPI: APIC 3f690390 0005C (v02 A_M_I_ OEMAPIC 06001023 MSFT 00000097)
ACPI: MCFG 3f6903f0 0003C (v01 A_M_I_ OEMMCFG 06001023 MSFT 00000097)
ACPI: ECDT 3f690430 00055 (v01 A_M_I_ OEMECDT 06001023 MSFT 00000097)
ACPI: OEMB 3f69e040 00061 (v01 A_M_I_ AMI_OEM 06001023 MSFT 00000097)
ACPI: HPET 3f699070 00038 (v01 A_M_I_ OEMHPET 06001023 MSFT 00000097)
ACPI: GSCI 3f69e0b0 02024 (v01 A_M_I_ GMCHSCI 06001023 MSFT 00000097)
ACPI: SSDT 3f6a0c80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
ACPI: SLIC 3f6990b0 00176 (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
126MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003f690
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f690
On node 0 totalpages: 259615
free_area_init_node: node 0, pgdat c06a2200, node_mem_map f6a8f200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 254 pages used for memmap
HighMem zone: 32148 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
Allocating PCI resources starting at 3f700000 (gap: 3f700000:bf700000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f6400000 s31744 r0 d21504 u2097152
pcpu-alloc: s31744 r0 d21504 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585
Kernel command line: BOOT_IMAGE=2_3.2.9-0.rt16.1.mga root=UUID=7dd3f555-146b-4d9c-a198-929ce4084070 resume=UUID=1e146fcf-1557-46c2-aa59-80febddc0be2 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003f690)
Memory: 1016768k/1038912k available (3799k kernel code, 21692k reserved, 2019k data, 564k init, 129608k highmem)
virtual kernel memory layout:
fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc06af000 - 0xc073c000 ( 564 kB)
.data : 0xc04b5e70 - 0xc06aee40 (2019 kB)
.text : 0xc0100000 - 0xc04b5e70 (3799 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Preemptible hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6008000 soft=f600a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1666.453 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.90 BogoMIPS (lpj=1666453)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 16471 entries in 33 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f60f6000 soft=f60f8000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
Disabled fast string operations
Brought up 2 CPUs
Total of 2 processors activated (6665.73 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 3f69e000 (270336 bytes)
RTC time: 15:01:14, date: 03/21/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 3f6a0190 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
ACPI: SSDT 3f6a0550 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
ACPI: SSDT 3f6a00e0 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
ACPI: SSDT 3f6a04c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xfed8ffff]
pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f]
pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 01-01]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000003f690000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x3f700000-0xfed8ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x004d]
pnp 00:08: [io 0x0050-0x005e]
pnp 00:08: [io 0x0063]
pnp 00:08: [io 0x0065]
pnp 00:08: [io 0x0067-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x025c-0x025f]
pnp 00:08: [io 0x0380-0x0383]
pnp 00:08: [io 0x0400-0x041f]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x03ff disabled]
pnp 00:08: [io 0x0480-0x04bf]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed50000-0xfed8ffff]
pnp 00:08: [mem 0xffb00000-0xffbfffff]
pnp 00:08: [mem 0xfff00000-0xffffffff]
system 00:08: [io 0x025c-0x025f] has been reserved
system 00:08: [io 0x0380-0x0383] has been reserved
system 00:08: [io 0x0400-0x041f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0x3f6fffff]
pnp 00:0c: [mem 0xfed90000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0x3f6fffff] could not be reserved
system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 15: assigned [mem 0x3f700000-0x3f8fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f900000-0x3fafffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x3fb00000-0x3fcfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x3f900000-0x3fafffff]
pci 0000:00:1c.0: bridge window [mem 0x3fb00000-0x3fcfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 01-01]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1c.3: bridge window [mem 0x3f700000-0x3f8fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0106 -> 0107)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x3f900000-0x3fafffff]
pci_bus 0000:04: resource 2 [mem 0x3fb00000-0x3fcfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0x3f700000-0x3f8fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5624k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1332342074.578:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1743
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1875k, total 8128k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
Marking TSC unstable due to TSC halts in idle states deeper than C2
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=1e146fcf-1557-46c2-aa59-80febddc0be2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:112:33
rtc_cmos 00:03: setting system clock to 2012-03-21 15:01:15 UTC (1332342075)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 564k freed
Write protecting the kernel text: 3800k
Write protecting the kernel read-only data: 1676k
dracut: dracut-017-1.mga2
udevd[89]: starting version 181
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
composite sync not supported
[drm] initialized overlay support
composite sync not supported
checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
render error detected, EIR: 0x00000010
page table error
PGTBL_ER: 0x00000002
[drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
render error detected, EIR: 0x00000010
page table error
PGTBL_ER: 0x00000002
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
ACPI Warning: _BQC returned an invalid level (20110623/video-472)
acpi device:0e: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
composite sync not supported
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
SCSI subsystem initialized
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.9-0.rt16.1.mga2 ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 44
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
usb 5-5: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60N, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
usb 5-5: New USB device found, idVendor=058f, idProduct=6335
usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-5: Product: Mass Storage Device
usb 5-5: Manufacturer: Generic
usb 5-5: SerialNumber: 058F63356336
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Initializing USB Mass Storage driver...
scsi4 : usb-storage 5-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sda: sda1 < sda5 sda6 > sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-6: new high-speed USB device number 3 using ehci_hcd
usbcore: registered new interface driver uas
usb 5-6: New USB device found, idVendor=13d3, idProduct=5111
usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
usb 5-6: Product: USB2.0 UVC VGA WebCam
usb 5-6: Manufacturer: Image Processor
usb 5-6: SerialNumber: USB2.0 UVC VGA WebCam
PM: Starting manual resume from disk
PM: Hibernation image partition 8:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
dracut: Checking ext4: /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070
dracut: issuing e2fsck -a /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070
dracut: /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070: clean, 135506/610800 files, 1148297/2441856 blocks
dracut: Remounting /dev/disk/by-uuid/7dd3f555-146b-4d9c-a198-929ce4084070 with -o acl,noatime,ro
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
dracut: Mounted root filesystem /dev/sda5
scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
sd 4:0:0:0: [sdb] 32104448 512-byte logical blocks: (16.4 GB/15.3 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
NET: Registered protocol family 10
udevd[290]: starting version 181
EXT4-fs (sda5): re-mounted. Opts: acl
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
atl1c 0000:01:00.0: setting latency timer to 64
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (60 C)
Non-volatile memory driver v1.3
atl1c 0000:01:00.0: version 1.0.1.0-NAPI
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
wmi: Mapper loaded
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC0] (off-line)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cfg80211: Calling CRDA to update world regulatory domain
asus_wmi: ASUS WMI generic driver loaded
Linux media interface: v0.10
ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:02:00.0: setting latency timer to 64
Linux video capture interface: v2.00
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
hda_intel: position_fix set to 1 for device 1043:83ce
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.6
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
asus_wmi: Backlight controlled by ACPI video driver
SKU: Nid=0x1d sku_cfg=0x4005822d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x00000082
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs: Internal Mic=0x12 Mic=0x18
realtek: No valid SSID, checking pincfg 0x4005822d for NID 0x1d
realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8320000, irq=17
uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5111)
input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: FR
cfg80211: Regulatory domain changed to country: FR
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 2377616k swap on /dev/sda2. Priority:0 extents:1 across:2377616k
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: direct probe to 62:75:fc:fe:29:18 (try 1/3)
wlan0: direct probe responded
wlan0: authenticate with 62:75:fc:fe:29:18 (try 1)
wlan0: authenticated
wlan0: associate with 62:75:fc:fe:29:18 (try 1)
wlan0: RX AssocResp from 62:75:fc:fe:29:18 (capab=0x11 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl

Actions: View

Attachments on bug 5031: 1805 | 1811 | 1812 | 1849 | 1866 | 1867 | 1873 | 1874 | 1878