Attachment 1442 Details for Bug 1598 – dmesg.txt

dmesg.txt

dmesg.txt (text/plain), 51.03 KB, created by claire robinson on 2012-01-27 15:13:53 CET

(hide)

Description:

Filename:

MIME Type:

Creator: claire robinson

Created: 2012-01-27 15:13:53 CET

Size: 51.03 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.8-desktop-9.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Dec 20 10:07:45 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
> BIOS-e820: 000000007f690000 - 000000007f69f000 (ACPI data)
> BIOS-e820: 000000007f69f000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU!
>DMI present.
>DMI: Samsung Electronics SX20S/SX20S, BIOS 12ZE 07/14/2006
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7f690 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-E3FFF uncachable
>  E4000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F700000 mask FFFF00000 uncachable
>  2 base 07F800000 mask FFF800000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000333fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0033000000 page 2M
> 0033000000 - 00333fe000 page 4k
>kernel direct mapping tables up to 333fe000 @ bfa000-c00000
>RAMDISK: 37bb0000 - 37ff0000
>Allocated new RAMDISK: 32fbe000 - 333fd0cc
>Move RAMDISK from 0000000037bb0000 - 0000000037fef0cb to 32fbe000 - 333fd0cb
>ACPI: RSDP 000f76d0 00014 (v00 PTLTD )
>ACPI: RSDT 7f698c8c 00048 (v01 PTLTD  Ohlone00 06040000  LTP 00000000)
>ACPI: FACP 7f69ee96 00074 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
>ACPI: DSDT 7f6996b0 057E6 (v01 INTEL  ALVISO   06040000 INTL 20030224)
>ACPI: FACS 7f6affc0 00040
>ACPI: APIC 7f69ef0a 0005A (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
>ACPI: HPET 7f69ef64 00038 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
>ACPI: MCFG 7f69ef9c 0003C (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
>ACPI: BOOT 7f69efd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
>ACPI: SSDT 7f699482 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
>ACPI: SSDT 7f698f57 0031B (v01  PmRef  Cpu0Ist 00003000 INTL 20030224)
>ACPI: SSDT 7f698d9d 001BA (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
>ACPI: SSDT 7f698cd4 000C9 (v01  PmRef    CpuPm 00003000 INTL 20030224)
>ACPI: Local APIC address 0xfee00000
>1218MB HIGHMEM available.
>819MB LOWMEM available.
>  mapped low ram: 0 - 333fe000
>  low ram: 0 - 333fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000333fe
>  HighMem  0x000333fe -> 0x0007f690
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f690
>On node 0 totalpages: 521759
>free_area_init_node: node 0, pgdat c069f180, node_mem_map f1fcd200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1608 pages used for memmap
>  Normal zone: 204214 pages, LIFO batch:31
>  HighMem zone: 2438 pages used for memmap
>  HighMem zone: 309516 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 12 pages/cpu @f1800000 s27904 r0 d21248 u4194304
>pcpu-alloc: s27904 r0 d21248 u4194304 alloc=1*4194304
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517681
>Kernel command line: BOOT_IMAGE=linux root=UUID=fe8a4ce1-b2bf-4150-8ab2-0a6449165932 resume=UUID=0fb18975-bd2f-4c32-a45b-82fdac7acca5 splash=silent vga=788
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>allocated 10437120 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000333fe:0007f690)
>Memory: 2048244k/2087488k available (3558k kernel code, 38792k reserved, 2237k data, 552k init, 1247816k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
>    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
>      .init : 0xc06a9000 - 0xc0733000   ( 552 kB)
>      .data : 0xc04798db - 0xc06a8fc0   (2237 kB)
>      .text : 0xc0100000 - 0xc04798db   (3558 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>CPU 0 irqstacks, hard=f0818000 soft=f081a000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1595.768 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.53 BogoMIPS (lpj=1595768)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 24k freed
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110112
>ftrace: allocating 15959 entries in 32 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>Brought up 1 CPUs
>Total of 1 processors activated (3191.53 BogoMIPS).
>devtmpfs: initialized
>Time: 13:23:24  Date: 01/27/12
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>Samsung X20 Laptop detected: enabling PCI bus# renumbering (pci=assign-busses)
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [CFAN] (on)
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
>pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
>pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
>pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
>pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
>pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
>pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
>pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
>pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
>pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
>pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xb0040000-0xb00403ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
>pci 0000:00:1e.2: reg 10: [io  0x1c00-0x1cff]
>pci 0000:00:1e.2: reg 14: [io  0x18c0-0x18ff]
>pci 0000:00:1e.2: reg 18: [mem 0xb0040800-0xb00409ff]
>pci 0000:00:1e.2: reg 1c: [mem 0xb0040400-0xb00404ff]
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
>pci 0000:00:1e.3: reg 10: [io  0x2400-0x24ff]
>pci 0000:00:1e.3: reg 14: [io  0x2000-0x207f]
>pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.3: PME# disabled
>pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
>pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
>pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
>pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
>pci 0000:00:1c.0: PCI bridge to [bus 01-ff]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
>pci 0000:02:05.0: [14e4:170c] type 0 class 0x000200
>pci 0000:02:05.0: reg 10: [mem 0xb8000000-0xb8001fff]
>pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:02:05.0: supports D1 D2
>pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:05.0: PME# disabled
>pci 0000:02:07.0: [8086:4220] type 0 class 0x000280
>pci 0000:02:07.0: reg 10: [mem 0xb8002000-0xb8002fff]
>pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:07.0: PME# disabled
>pci 0000:02:09.0: [1180:0476] type 2 class 0x000607
>pci 0000:02:09.0: reg 10: [mem 0x000da000-0x000dafff]
>pci 0000:02:09.0: supports D1 D2
>pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:09.0: PME# disabled
>pci 0000:02:09.1: [1180:0552] type 0 class 0x000c00
>pci 0000:02:09.1: reg 10: [mem 0xb8003000-0xb80037ff]
>pci 0000:02:09.1: PME# supported from D0 D3hot D3cold
>pci 0000:02:09.1: PME# disabled
>pci 0000:02:09.2: [1180:0822] type 0 class 0x000805
>pci 0000:02:09.2: reg 10: [mem 0xb8003800-0xb80038ff]
>pci 0000:02:09.2: supports D1 D2
>pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:09.2: PME# disabled
>pci 0000:02:09.3: [1180:0592] type 0 class 0x000880
>pci 0000:02:09.3: reg 10: [mem 0xb8003c00-0xb8003cff]
>pci 0000:02:09.3: supports D1 D2
>pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:09.3: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 02-ff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>reserve RAM buffer: 000000007f690000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>pnp 00:00: [mem 0x000cc000-0x000cffff window]
>pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>pnp 00:00: [mem 0x000dc000-0x000dffff window]
>pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>pnp 00:00: [mem 0x000ec000-0x000effff window]
>pnp 00:00: [mem 0x000f0000-0x000fffff window]
>pnp 00:00: [mem 0x80000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xe0000000-0xefffffff]
>pnp 00:01: [mem 0xf0000000-0xf0003fff]
>pnp 00:01: [mem 0xf0004000-0xf0004fff]
>pnp 00:01: [mem 0xf0005000-0xf0005fff]
>pnp 00:01: [mem 0xf0008000-0xf000bfff]
>pnp 00:01: [mem 0xfed20000-0xfed8ffff]
>system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:01: [mem 0xf0000000-0xf0003fff] has been reserved
>system 00:01: [mem 0xf0004000-0xf0004fff] has been reserved
>system 00:01: [mem 0xf0005000-0xf0005fff] has been reserved
>system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
>system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x0000-0x001f]
>pnp 00:02: [io  0x0081-0x0091]
>pnp 00:02: [io  0x0093-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [mem 0xff000000-0xffffffff]
>pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfed00000-0xfed003ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x00f0]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x002e-0x002f]
>pnp 00:06: [io  0x0061]
>pnp 00:06: [io  0x0063]
>pnp 00:06: [io  0x0065]
>pnp 00:06: [io  0x0067]
>pnp 00:06: [io  0x0070]
>pnp 00:06: [io  0x0080]
>pnp 00:06: [io  0x0092]
>pnp 00:06: [io  0x00b2-0x00b3]
>pnp 00:06: [io  0x0680-0x06df]
>pnp 00:06: [io  0x06f0-0x06ff]
>pnp 00:06: [io  0x0800-0x080f]
>pnp 00:06: [io  0x0900-0x090f]
>pnp 00:06: [io  0x1000-0x107f]
>pnp 00:06: [io  0x1180-0x11bf]
>pnp 00:06: [io  0x1640-0x164f]
>system 00:06: [io  0x0680-0x06df] has been reserved
>system 00:06: [io  0x06f0-0x06ff] has been reserved
>system 00:06: [io  0x0800-0x080f] has been reserved
>system 00:06: [io  0x0900-0x090f] has been reserved
>system 00:06: [io  0x1000-0x107f] has been reserved
>system 00:06: [io  0x1180-0x11bf] has been reserved
>system 00:06: [io  0x1640-0x164f] has been reserved
>system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:07: [io  0x0070-0x0077]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:08: [io  0x0060]
>pnp 00:08: [io  0x0064]
>pnp 00:08: [irq 1]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:09: [irq 12]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x85ffffff pref]
>pci 0000:00:02.1: BAR 0: assigned [mem 0x86000000-0x8607ffff]
>pci 0000:00:02.1: BAR 0: set to [mem 0x86000000-0x8607ffff] (PCI address [0x86000000-0x8607ffff])
>pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
>pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
>pci 0000:02:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:09.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
>pci 0000:02:05.0: BAR 6: assigned [mem 0x84000000-0x8400ffff pref]
>pci 0000:02:09.0: BAR 13: assigned [io  0x4000-0x40ff]
>pci 0000:02:09.0: BAR 14: assigned [io  0x4400-0x44ff]
>pci 0000:02:09.0: CardBus bridge to [bus 03-06]
>pci 0000:02:09.0:   bridge window [io  0x4000-0x40ff]
>pci 0000:02:09.0:   bridge window [io  0x4400-0x44ff]
>pci 0000:02:09.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:09.0:   bridge window [mem 0x88000000-0x8bffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 02-06]
>pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
>pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x85ffffff pref]
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:09.0: power state changed by ACPI to D0
>pci 0000:02:09.0: power state changed by ACPI to D0
>pci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb7ffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:02: resource 1 [mem 0xb8000000-0xb80fffff]
>pci_bus 0000:02: resource 2 [mem 0x80000000-0x85ffffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
>pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
>pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4352k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1327670604.320:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1571
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>vesafb: framebuffer at 0xc0000000, mapped to 0xf3c80000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>serial 0000:00:1e.3: PCI INT B disabled
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>isapnp: Scanning for PnP cards...
>agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>PM: Checking hibernation image partition UUID=0fb18975-bd2f-4c32-a45b-82fdac7acca5
>isapnp: No Plug & Play device found
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 12:199:383
>rtc_cmos 00:07: setting system clock to 2012-01-27 13:23:25 UTC (1327670605)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 552k freed
>Write protecting the kernel text: 3560k
>Write protecting the kernel read-only data: 1636k
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>Refined TSC clocksource calibration: 1595.999 MHz.
>Switching to clocksource tsc
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] initialized overlay support
>Synaptics Touchpad, model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
>checking generic (c0000000 7b0000) vs hw (c0000000 10000000)
>fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.8-desktop-9.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata2: port disabled. ignoring.
>ata1.00: ATA-6: TOSHIBA MK4025GAS, KA101A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632B, TM30, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632B TM30 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: New USB device found, idVendor=1131, idProduct=1004
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: ISSCEDRBTA
>usb 2-1: Manufacturer: ISSC
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>video LNXVIDEO:00: Restoring backlight state
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>usb 3-1: New USB device found, idVendor=04fc, idProduct=05da
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Trust Mouse
>usb 3-1: Manufacturer: MLK
>input: MLK Trust Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
>generic-usb 0003:04FC:05DA.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse] on usb-0000:00:1d.1-1/input0
>udev[113]: starting version 166
>ACPI: Fan [FAN1] (on)
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (47 C)
>audit: name_count maxed, losing inode data: dev=00:05, inode=5685
>audit: name_count maxed, losing inode data: dev=00:05, inode=4398
>audit: name_count maxed, losing inode data: dev=00:05, inode=4398
>ACPI: acpi_idle registered with cpuidle
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>Non-volatile memory driver v1.3
>EXT4-fs (sda1): re-mounted. Opts: acl
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:02:09.2: SDHCI controller found [1180:0822] (rev 17)
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>sdhci-pci 0000:02:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:09.2] using DMA
>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
>yenta_cardbus 0000:02:09.0: CardBus bridge found [144d:c01a]
>yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:02:09.0: Socket status: 30000006
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff: excluding 0xb8000000-0xb800ffff
>yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x85ffffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x85ffffff: excluding 0x80000000-0x85ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd8000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>vboxguest: VirtualBox Guest PCI device not found.
>Adding 3020184k swap on /dev/sda5.  Priority:-1 extents:1 across:3020184k 
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd8000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: resource 0000:00:1f.3 [io  0x18a0-0x18bf] conflicts with ACPI region SMBI [io 0x18a0-0x18af]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
>ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
>b44: b44.c:v2.0
>b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:00:f0:79:25:99
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>cfg80211: Calling CRDA to update world regulatory domain
>firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
>firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
>firewire_ohci 0000:02:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>firewire_ohci: Added fw-ohci device 0000:02:09.1, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
>libipw: 802.11 data/management/control stack, git-1.1.13
>libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ipw2200 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
>firewire_core: created device fw0: GUID 0000f041200a8c3b, S400
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 50933 usecs (11 samples)
>intel8x0: measured clock 215 rejected
>intel8x0_measure_ac97_clock: measured 50509 usecs (2434 samples)
>intel8x0: clocking to 48000
>audit: name_count maxed, losing inode data: dev=00:05, inode=8415
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>audit: name_count maxed, losing inode data: dev=00:05, inode=8303
>audit: name_count maxed, losing inode data: dev=00:05, inode=8303
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>audit: name_count maxed, losing inode data: dev=00:05, inode=3
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>vboxdrv: Found 1 processor cores.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
>NET: Registered protocol family 10
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
>cfg80211: Calling CRDA for country: GB
>cfg80211: Regulatory domain changed to country: GB
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>lib80211_crypt: registered algorithm 'WEP'
>NET: Registered protocol family 17
>lib80211_crypt: registered algorithm 'CCMP'
>padlock_aes: VIA PadLock not detected.
>Intel AES-NI instructions are not detected.
>lib80211_crypt: registered algorithm 'TKIP'
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>eth1: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>type=1305 audit(1327670702.375:56963): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
>type=1305 audit(1327670702.375:56964): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
>fuse init (API version 7.16)
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
>b44 ssb0:0: eth0: powering down PHY
>IPv6 over IPv4 tunneling driver
>PM: Syncing filesystems ... done.
>PM: Preparing system for mem sleep
>Freezing user space processes ... (elapsed 0.01 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>PM: Entering mem sleep
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>sdhci-pci 0000:02:09.2: PCI INT C disabled
>eth1: Going into suspend...
>b44 0000:02:05.0: PCI INT A disabled
>pci 0000:00:1f.3: PCI INT B disabled
>ipw2200 0000:02:07.0: PCI INT A disabled
>Intel ICH Modem 0000:00:1e.3: PCI INT B disabled
>Intel ICH 0000:00:1e.2: PCI INT A disabled
>ehci_hcd 0000:00:1d.7: PCI INT A disabled
>uhci_hcd 0000:00:1d.3: PCI INT D disabled
>uhci_hcd 0000:00:1d.2: PCI INT C disabled
>uhci_hcd 0000:00:1d.1: PCI INT B disabled
>uhci_hcd 0000:00:1d.0: PCI INT A disabled
>i915 0000:00:02.0: PCI INT A disabled
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D3
>firewire_ohci 0000:02:09.1: power state changed by ACPI to D3
>ata_piix 0000:00:1f.1: PCI INT A disabled
>PM: suspend of devices complete after 441.216 msecs
>PM: late suspend of devices complete after 11.582 msecs
>ACPI: Preparing to enter system sleep state S3
>PM: Saving platform NVS memory
>Disabling non-boot CPUs ...
>Back to C!
>PM: Restoring platform NVS memory
>ACPI: Waking up from system sleep state S3
>agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x30900106)
>i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xd0000008, writing 0xc0000008)
>i915 0000:00:02.0: restoring config space at offset 0x5 (was 0xde01, writing 0x1801)
>i915 0000:00:02.0: restoring config space at offset 0x4 (was 0xcff80000, writing 0xb0080000)
>i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
>pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x86000000)
>pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
>pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001)
>pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xb7f0b400)
>pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
>pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x20200, writing 0x10100)
>pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
>pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
>uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
>uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
>uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
>uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
>ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
>pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
>pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x85f18001)
>pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xb800b800)
>pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800010, writing 0x22804040)
>pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20060600, writing 0x20060200)
>pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100107)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0xf (was 0x100, writing 0x10a)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0x7 (was 0x0, writing 0xb0040400)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0x6 (was 0x0, writing 0xb0040800)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0x5 (was 0x1301, writing 0x18c1)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0x4 (was 0x1201, writing 0x1c01)
>Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900003)
>Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x5 (was 0x1501, writing 0x2001)
>Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x4 (was 0x1401, writing 0x2401)
>Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2000007, writing 0x2000107)
>ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
>ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2880005)
>b44 0000:02:05.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
>b44 0000:02:05.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8000000)
>b44 0000:02:05.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
>b44 0000:02:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x8100106)
>ipw2200 0000:02:07.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010b)
>ipw2200 0000:02:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8002000)
>ipw2200 0000:02:07.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
>ipw2200 0000:02:07.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900116)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xf (was 0x7000100, writing 0x5800100)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xe (was 0x0, writing 0x44fc)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xd (was 0x0, writing 0x4400)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xc (was 0x0, writing 0x40fc)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xb (was 0x0, writing 0x4000)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0xa (was 0x0, writing 0x8bfff000)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0x9 (was 0x0, writing 0x88000000)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
>yenta_cardbus 0000:02:09.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800)
>firewire_ohci 0000:02:09.1: restoring config space at offset 0xf (was 0x4020200, writing 0x40202ff)
>firewire_ohci 0000:02:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xb8003000)
>firewire_ohci 0000:02:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>sdhci-pci 0000:02:09.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
>sdhci-pci 0000:02:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xb8003800)
>sdhci-pci 0000:02:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
>sdhci-pci 0000:02:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
>pci 0000:02:09.3: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
>pci 0000:02:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xb8003c00)
>pci 0000:02:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102)
>PM: early resume of devices complete after 1.223 msecs
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>eth1: Coming out of suspend...
>ipw2200 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
>firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
>ata2: port disabled. ignoring.
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
>sdhci-pci 0000:02:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>sdhci-pci 0000:02:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
>firewire_core: skipped bus generations, destroying all nodes
>sd 0:0:0:0: [sda] Starting disk
>usb 3-1: reset low speed USB device using uhci_hcd and address 2
>firewire_core: rediscovered device fw0
>usb 2-1: reset full speed USB device using uhci_hcd and address 2
>btusb 2-1:1.0: no reset_resume for driver btusb?
>btusb 2-1:1.1: no reset_resume for driver btusb?
>ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
>ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>PM: resume of devices complete after 2039.664 msecs
>PM: Finishing wakeup.
>Restarting tasks ... done.
>video LNXVIDEO:00: Restoring backlight state
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>martian source 255.255.255.255 from 192.168.2.11, on dev eth1
>ll header: ff:ff:ff:ff:ff:ff:00:21:85:14:ca:4e:08:00
>eth1: no IPv6 routers present
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda6): re-mounted. Opts: acl,commit=0

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-desktop-9.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Dec 20 10:07:45 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
 BIOS-e820: 000000007f690000 - 000000007f69f000 (ACPI data)
 BIOS-e820: 000000007f69f000 - 000000007f700000 (ACPI NVS)
 BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
 BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI present.
DMI: Samsung Electronics SX20S/SX20S, BIOS 12ZE 07/14/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7f690 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E3FFF uncachable
  E4000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 07F700000 mask FFFF00000 uncachable
  2 base 07F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000333fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0033000000 page 2M
 0033000000 - 00333fe000 page 4k
kernel direct mapping tables up to 333fe000 @ bfa000-c00000
RAMDISK: 37bb0000 - 37ff0000
Allocated new RAMDISK: 32fbe000 - 333fd0cc
Move RAMDISK from 0000000037bb0000 - 0000000037fef0cb to 32fbe000 - 333fd0cb
ACPI: RSDP 000f76d0 00014 (v00 PTLTD )
ACPI: RSDT 7f698c8c 00048 (v01 PTLTD  Ohlone00 06040000  LTP 00000000)
ACPI: FACP 7f69ee96 00074 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
ACPI: DSDT 7f6996b0 057E6 (v01 INTEL  ALVISO   06040000 INTL 20030224)
ACPI: FACS 7f6affc0 00040
ACPI: APIC 7f69ef0a 0005A (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
ACPI: HPET 7f69ef64 00038 (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
ACPI: MCFG 7f69ef9c 0003C (v01 INTEL  ALVISO   06040000 LOHR 0000005F)
ACPI: BOOT 7f69efd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 7f699482 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
ACPI: SSDT 7f698f57 0031B (v01  PmRef  Cpu0Ist 00003000 INTL 20030224)
ACPI: SSDT 7f698d9d 001BA (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 7f698cd4 000C9 (v01  PmRef    CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
1218MB HIGHMEM available.
819MB LOWMEM available.
  mapped low ram: 0 - 333fe000
  low ram: 0 - 333fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000333fe
  HighMem  0x000333fe -> 0x0007f690
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007f690
On node 0 totalpages: 521759
free_area_init_node: node 0, pgdat c069f180, node_mem_map f1fcd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1608 pages used for memmap
  Normal zone: 204214 pages, LIFO batch:31
  HighMem zone: 2438 pages used for memmap
  HighMem zone: 309516 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f1800000 s27904 r0 d21248 u4194304
pcpu-alloc: s27904 r0 d21248 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517681
Kernel command line: BOOT_IMAGE=linux root=UUID=fe8a4ce1-b2bf-4150-8ab2-0a6449165932 resume=UUID=0fb18975-bd2f-4c32-a45b-82fdac7acca5 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10437120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000333fe:0007f690)
Memory: 2048244k/2087488k available (3558k kernel code, 38792k reserved, 2237k data, 552k init, 1247816k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
      .init : 0xc06a9000 - 0xc0733000   ( 552 kB)
      .data : 0xc04798db - 0xc06a8fc0   (2237 kB)
      .text : 0xc0100000 - 0xc04798db   (3558 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f0818000 soft=f081a000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1595.768 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.53 BogoMIPS (lpj=1595768)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 15959 entries in 32 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
Performance Events: p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Brought up 1 CPUs
Total of 1 processors activated (3191.53 BogoMIPS).
devtmpfs: initialized
Time: 13:23:24  Date: 01/27/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Samsung X20 Laptop detected: enabling PCI bus# renumbering (pci=assign-busses)
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [CFAN] (on)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xb0000000-0xb003ffff]
pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xb0040000-0xb00403ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
pci 0000:00:1e.2: reg 10: [io  0x1c00-0x1cff]
pci 0000:00:1e.2: reg 14: [io  0x18c0-0x18ff]
pci 0000:00:1e.2: reg 18: [mem 0xb0040800-0xb00409ff]
pci 0000:00:1e.2: reg 1c: [mem 0xb0040400-0xb00404ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703
pci 0000:00:1e.3: reg 10: [io  0x2400-0x24ff]
pci 0000:00:1e.3: reg 14: [io  0x2000-0x207f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: PME# disabled
pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x18a0-0x18bf]
pci 0000:00:1c.0: PCI bridge to [bus 01-ff]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:02:05.0: [14e4:170c] type 0 class 0x000200
pci 0000:02:05.0: reg 10: [mem 0xb8000000-0xb8001fff]
pci 0000:02:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PME# disabled
pci 0000:02:07.0: [8086:4220] type 0 class 0x000280
pci 0000:02:07.0: reg 10: [mem 0xb8002000-0xb8002fff]
pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
pci 0000:02:07.0: PME# disabled
pci 0000:02:09.0: [1180:0476] type 2 class 0x000607
pci 0000:02:09.0: reg 10: [mem 0x000da000-0x000dafff]
pci 0000:02:09.0: supports D1 D2
pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.0: PME# disabled
pci 0000:02:09.1: [1180:0552] type 0 class 0x000c00
pci 0000:02:09.1: reg 10: [mem 0xb8003000-0xb80037ff]
pci 0000:02:09.1: PME# supported from D0 D3hot D3cold
pci 0000:02:09.1: PME# disabled
pci 0000:02:09.2: [1180:0822] type 0 class 0x000805
pci 0000:02:09.2: reg 10: [mem 0xb8003800-0xb80038ff]
pci 0000:02:09.2: supports D1 D2
pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.2: PME# disabled
pci 0000:02:09.3: [1180:0592] type 0 class 0x000880
pci 0000:02:09.3: reg 10: [mem 0xb8003c00-0xb8003cff]
pci 0000:02:09.3: supports D1 D2
pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-ff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000007f690000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xf0000000-0xf0003fff]
pnp 00:01: [mem 0xf0004000-0xf0004fff]
pnp 00:01: [mem 0xf0005000-0xf0005fff]
pnp 00:01: [mem 0xf0008000-0xf000bfff]
pnp 00:01: [mem 0xfed20000-0xfed8ffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf0000000-0xf0003fff] has been reserved
system 00:01: [mem 0xf0004000-0xf0004fff] has been reserved
system 00:01: [mem 0xf0005000-0xf0005fff] has been reserved
system 00:01: [mem 0xf0008000-0xf000bfff] has been reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0000-0x001f]
pnp 00:02: [io  0x0081-0x0091]
pnp 00:02: [io  0x0093-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x002e-0x002f]
pnp 00:06: [io  0x0061]
pnp 00:06: [io  0x0063]
pnp 00:06: [io  0x0065]
pnp 00:06: [io  0x0067]
pnp 00:06: [io  0x0070]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0092]
pnp 00:06: [io  0x00b2-0x00b3]
pnp 00:06: [io  0x0680-0x06df]
pnp 00:06: [io  0x06f0-0x06ff]
pnp 00:06: [io  0x0800-0x080f]
pnp 00:06: [io  0x0900-0x090f]
pnp 00:06: [io  0x1000-0x107f]
pnp 00:06: [io  0x1180-0x11bf]
pnp 00:06: [io  0x1640-0x164f]
system 00:06: [io  0x0680-0x06df] has been reserved
system 00:06: [io  0x06f0-0x06ff] has been reserved
system 00:06: [io  0x0800-0x080f] has been reserved
system 00:06: [io  0x0900-0x090f] has been reserved
system 00:06: [io  0x1000-0x107f] has been reserved
system 00:06: [io  0x1180-0x11bf] has been reserved
system 00:06: [io  0x1640-0x164f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0070-0x0077]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x85ffffff pref]
pci 0000:00:02.1: BAR 0: assigned [mem 0x86000000-0x8607ffff]
pci 0000:00:02.1: BAR 0: set to [mem 0x86000000-0x8607ffff] (PCI address [0x86000000-0x8607ffff])
pci 0000:00:1e.0: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
pci 0000:02:09.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:02:09.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:02:05.0: BAR 6: assigned [mem 0x84000000-0x8400ffff pref]
pci 0000:02:09.0: BAR 13: assigned [io  0x4000-0x40ff]
pci 0000:02:09.0: BAR 14: assigned [io  0x4400-0x44ff]
pci 0000:02:09.0: CardBus bridge to [bus 03-06]
pci 0000:02:09.0:   bridge window [io  0x4000-0x40ff]
pci 0000:02:09.0:   bridge window [io  0x4400-0x44ff]
pci 0000:02:09.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:02:09.0:   bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-06]
pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1e.0:   bridge window [mem 0xb8000000-0xb80fffff]
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x85ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:09.0: power state changed by ACPI to D0
pci 0000:02:09.0: power state changed by ACPI to D0
pci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb7ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xb8000000-0xb80fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x85ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x4000-0x40ff]
pci_bus 0000:03: resource 1 [io  0x4400-0x44ff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4352k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1327670604.320:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1571
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
vesafb: framebuffer at 0xc0000000, mapped to 0xf3c80000, using 1875k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
serial 0000:00:1e.3: PCI INT B disabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
isapnp: Scanning for PnP cards...
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=0fb18975-bd2f-4c32-a45b-82fdac7acca5
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 12:199:383
rtc_cmos 00:07: setting system clock to 2012-01-27 13:23:25 UTC (1327670605)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 552k freed
Write protecting the kernel text: 3560k
Write protecting the kernel read-only data: 1636k
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
Refined TSC clocksource calibration: 1595.999 MHz.
Switching to clocksource tsc
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
Synaptics Touchpad, model: 1, fw: 6.1, id: 0x2580b1, caps: 0xa04713/0x200000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
checking generic (c0000000 7b0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-9.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata2: port disabled. ignoring.
ata1.00: ATA-6: TOSHIBA MK4025GAS, KA101A, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA 
ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632B, TM30, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632B TM30 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: New USB device found, idVendor=1131, idProduct=1004
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: ISSCEDRBTA
usb 2-1: Manufacturer: ISSC
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
usb 3-1: new low speed USB device using uhci_hcd and address 2
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
usb 3-1: New USB device found, idVendor=04fc, idProduct=05da
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Trust Mouse
usb 3-1: Manufacturer: MLK
input: MLK Trust Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
generic-usb 0003:04FC:05DA.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse] on usb-0000:00:1d.1-1/input0
udev[113]: starting version 166
ACPI: Fan [FAN1] (on)
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (47 C)
audit: name_count maxed, losing inode data: dev=00:05, inode=5685
audit: name_count maxed, losing inode data: dev=00:05, inode=4398
audit: name_count maxed, losing inode data: dev=00:05, inode=4398
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
Non-volatile memory driver v1.3
EXT4-fs (sda1): re-mounted. Opts: acl
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:09.2: SDHCI controller found [1180:0822] (rev 17)
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:02:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:09.2] using DMA
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
yenta_cardbus 0000:02:09.0: CardBus bridge found [144d:c01a]
yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:02:09.0: Socket status: 30000006
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x40ff 0x4400-0x44ff
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff: excluding 0xb8000000-0xb800ffff
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x85ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x85ffffff: excluding 0x80000000-0x85ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd8000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
vboxguest: VirtualBox Guest PCI device not found.
Adding 3020184k swap on /dev/sda5.  Priority:-1 extents:1 across:3020184k 
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd8000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0x18a0-0x18bf] conflicts with ACPI region SMBI [io 0x18a0-0x18af]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
intel_rng: FWH not detected
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
b44: b44.c:v2.0
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:00:f0:79:25:99
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
cfg80211: Calling CRDA to update world regulatory domain
firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
firewire_ohci 0000:02:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
firewire_ohci: Added fw-ohci device 0000:02:09.1, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
firewire_core: created device fw0: GUID 0000f041200a8c3b, S400
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1e.2: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50933 usecs (11 samples)
intel8x0: measured clock 215 rejected
intel8x0_measure_ac97_clock: measured 50509 usecs (2434 samples)
intel8x0: clocking to 48000
audit: name_count maxed, losing inode data: dev=00:05, inode=8415
audit: name_count maxed, losing inode data: dev=00:05, inode=3
audit: name_count maxed, losing inode data: dev=00:05, inode=3
audit: name_count maxed, losing inode data: dev=00:05, inode=3
audit: name_count maxed, losing inode data: dev=00:05, inode=3
audit: name_count maxed, losing inode data: dev=00:05, inode=8303
audit: name_count maxed, losing inode data: dev=00:05, inode=8303
audit: name_count maxed, losing inode data: dev=00:05, inode=3
audit: name_count maxed, losing inode data: dev=00:05, inode=3
Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
NET: Registered protocol family 10
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ata1: EH complete
EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
ADDRCONF(NETDEV_UP): eth0: link is not ready
lib80211_crypt: registered algorithm 'WEP'
NET: Registered protocol family 17
lib80211_crypt: registered algorithm 'CCMP'
padlock_aes: VIA PadLock not detected.
Intel AES-NI instructions are not detected.
lib80211_crypt: registered algorithm 'TKIP'
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
eth1: no IPv6 routers present
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
type=1305 audit(1327670702.375:56963): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1327670702.375:56964): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
fuse init (API version 7.16)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ata1: EH complete
EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
b44 ssb0:0: eth0: powering down PHY
IPv6 over IPv4 tunneling driver
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sdhci-pci 0000:02:09.2: PCI INT C disabled
eth1: Going into suspend...
b44 0000:02:05.0: PCI INT A disabled
pci 0000:00:1f.3: PCI INT B disabled
ipw2200 0000:02:07.0: PCI INT A disabled
Intel ICH Modem 0000:00:1e.3: PCI INT B disabled
Intel ICH 0000:00:1e.2: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
uhci_hcd 0000:00:1d.3: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
i915 0000:00:02.0: PCI INT A disabled
sdhci-pci 0000:02:09.2: power state changed by ACPI to D3
firewire_ohci 0000:02:09.1: power state changed by ACPI to D3
ata_piix 0000:00:1f.1: PCI INT A disabled
PM: suspend of devices complete after 441.216 msecs
PM: late suspend of devices complete after 11.582 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Back to C!
PM: Restoring platform NVS memory
ACPI: Waking up from system sleep state S3
agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x30900106)
i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xd0000008, writing 0xc0000008)
i915 0000:00:02.0: restoring config space at offset 0x5 (was 0xde01, writing 0x1801)
i915 0000:00:02.0: restoring config space at offset 0x4 (was 0xcff80000, writing 0xb0080000)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x86000000)
pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a)
pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd3f1d001)
pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xb7f0b400)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x20200, writing 0x10100)
pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x85f18001)
pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xb800b800)
pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800010, writing 0x22804040)
pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20060600, writing 0x20060200)
pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100107)
Intel ICH 0000:00:1e.2: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Intel ICH 0000:00:1e.2: restoring config space at offset 0x7 (was 0x0, writing 0xb0040400)
Intel ICH 0000:00:1e.2: restoring config space at offset 0x6 (was 0x0, writing 0xb0040800)
Intel ICH 0000:00:1e.2: restoring config space at offset 0x5 (was 0x1301, writing 0x18c1)
Intel ICH 0000:00:1e.2: restoring config space at offset 0x4 (was 0x1201, writing 0x1c01)
Intel ICH 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900003)
Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x5 (was 0x1501, writing 0x2001)
Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x4 (was 0x1401, writing 0x2401)
Intel ICH Modem 0000:00:1e.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2000007, writing 0x2000107)
ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2880005)
b44 0000:02:05.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
b44 0000:02:05.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8000000)
b44 0000:02:05.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
b44 0000:02:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x8100106)
ipw2200 0000:02:07.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010b)
ipw2200 0000:02:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xb8002000)
ipw2200 0000:02:07.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
ipw2200 0000:02:07.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900116)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xf (was 0x7000100, writing 0x5800100)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xe (was 0x0, writing 0x44fc)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xd (was 0x0, writing 0x4400)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xc (was 0x0, writing 0x40fc)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xb (was 0x0, writing 0x4000)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0xa (was 0x0, writing 0x8bfff000)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0x9 (was 0x0, writing 0x88000000)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302)
yenta_cardbus 0000:02:09.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800)
firewire_ohci 0000:02:09.1: restoring config space at offset 0xf (was 0x4020200, writing 0x40202ff)
firewire_ohci 0000:02:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xb8003000)
firewire_ohci 0000:02:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
sdhci-pci 0000:02:09.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
sdhci-pci 0000:02:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xb8003800)
sdhci-pci 0000:02:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
sdhci-pci 0000:02:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
pci 0000:02:09.3: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
pci 0000:02:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xb8003c00)
pci 0000:02:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102)
PM: early resume of devices complete after 1.223 msecs
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1e.2: setting latency timer to 64
Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
eth1: Coming out of suspend...
ipw2200 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
firewire_ohci 0000:02:09.1: power state changed by ACPI to D0
ata2: port disabled. ignoring.
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: power state changed by ACPI to D0
sdhci-pci 0000:02:09.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:02:09.2: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: skipped bus generations, destroying all nodes
sd 0:0:0:0: [sda] Starting disk
usb 3-1: reset low speed USB device using uhci_hcd and address 2
firewire_core: rediscovered device fw0
usb 2-1: reset full speed USB device using uhci_hcd and address 2
btusb 2-1:1.0: no reset_resume for driver btusb?
btusb 2-1:1.1: no reset_resume for driver btusb?
ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
PM: resume of devices complete after 2039.664 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
martian source 255.255.255.255 from 192.168.2.11, on dev eth1
ll header: ff:ff:ff:ff:ff:ff:00:21:85:14:ca:4e:08:00
eth1: no IPv6 routers present
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ata1: EH complete
EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,commit=0

Actions: View

Attachments on bug 1598: 518 | 1442 | 1443