Attachment 1401 Details for Bug 4215 – The dmesg messages when access point association is successful.

The dmesg messages when access point association is successful.

dmesg (text/plain), 48.60 KB, created by Edward d'Auvergne on 2012-01-21 22:24:06 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Edward d'Auvergne

Created: 2012-01-21 22:24:06 CET

Size: 48.60 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.8-desktop-9.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Dec 20 09:45:44 UTC 2011
>Command line: BOOT_IMAGE=linux root=UUID=39df3386-cfb8-48f8-bc71-f8dec27f608d resume=UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99 splash=silent pcie_aspm=force vga=788
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable)
> BIOS-e820: 000000007f7d0000 - 000000007f7e5600 (reserved)
> BIOS-e820: 000000007f7e5600 - 000000007f7f8000 (ACPI NVS)
> BIOS-e820: 000000007f7f8000 - 000000007f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Hewlett-Packard HP Compaq nx6320 (GA839PA#ABG)/30AA, BIOS 68YDU Ver. F.0B 12/15/2006
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x7f7d0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base F7F800000 mask FFF800000 uncachable
>  2 base 0FEDA0000 mask FFFFE0000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000007f7d0000
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f7d0000 page 4k
>kernel direct mapping tables up to 7f7d0000 @ 1fffc000-20000000
>RAMDISK: 37b76000 - 37ff0000
>ACPI: RSDP 00000000000f7bf0 00024 (v02 HP    )
>ACPI: XSDT 000000007f7e57c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>ACPI: FACP 000000007f7e5684 000F4 (v04 HP     30AA     00000003 HP   00000001)
>ACPI: DSDT 000000007f7e5ac0 0FBDE (v01 HP       nc6340 00010000 MSFT 0100000E)
>ACPI: FACS 000000007f7f7e80 00040
>ACPI: SLIC 000000007f7e5838 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>ACPI: HPET 000000007f7e59b0 00038 (v01 HP     30AA     00000001 HP   00000001)
>ACPI: APIC 000000007f7e59e8 00068 (v01 HP     30AA     00000001 HP   00000001)
>ACPI: MCFG 000000007f7e5a50 0003C (v01 HP     30AA     00000001 HP   00000001)
>ACPI: TCPA 000000007f7e5a8c 00032 (v02 HP     30AA     00000001 HP   00000001)
>ACPI: SSDT 000000007f7f569e 00326 (v01 HP       HPQSAT 00000001 MSFT 0100000E)
>ACPI: SSDT 000000007f7f6219 0025F (v01 HP      Cpu0Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007f7f6478 000A6 (v01 HP      Cpu1Tst 00003000 INTL 20050624)
>ACPI: SSDT 000000007f7f651e 004D7 (v01 HP        CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f7d0000
>Initmem setup node 0 0000000000000000-000000007f7d0000
>  NODE_DATA [000000007f7cb000 - 000000007f7cffff]
> [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f7d0
>On node 0 totalpages: 522079
>  DMA zone: 56 pages used for memmap
>  DMA zone: 6 pages reserved
>  DMA zone: 3921 pages, LIFO batch:0
>  DMA32 zone: 7084 pages used for memmap
>  DMA32 zone: 511012 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f400000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s76736 r8192 d21568 u1048576
>pcpu-alloc: s76736 r8192 d21568 u1048576 alloc=1*2097152
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514933
>Policy zone: DMA32
>Kernel command line: BOOT_IMAGE=linux root=UUID=39df3386-cfb8-48f8-bc71-f8dec27f608d resume=UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99 splash=silent pcie_aspm=force vga=788
>PCIe ASPM is forcibly enabled
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2045468k/2088768k available (4069k kernel code, 452k absent, 42848k reserved, 3290k data, 724k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>allocated 20971520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1994.942 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.88 BogoMIPS (lpj=1994942)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110112
>ftrace: allocating 16019 entries in 63 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Booting Node   0, Processors  #1 Ok.
>CPU1: Thermal monitoring handled by SMI
>Brought up 2 CPUs
>Total of 2 processors activated (7979.72 BogoMIPS).
>devtmpfs: initialized
>Time:  8:24:56  Date: 01/21/12
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: not using MMCONFIG
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT 000000007f7f5a8c 0023D (v01 HP      Cpu0Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 0023D (v01 HP      Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007f7f5d4e 004CB (v01 HP      Cpu0Cst 00003001 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 004CB (v01 HP      Cpu0Cst 00003001 INTL 20050624)
>ACPI: SSDT 000000007f7f59c4 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 000000007f7f5cc9 00085 (v01 HP      Cpu1Cst 00003000 INTL 20050624)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT           (null) 00085 (v01 HP      Cpu1Cst 00003000 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>ACPI: Power Resource [C1F0] (on)
>ACPI: Power Resource [C1FD] (on)
>ACPI: Power Resource [C21A] (on)
>ACPI: Power Resource [C222] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>ACPI: Power Resource [C323] (off)
>ACPI: Power Resource [C324] (off)
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfedfffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
>pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
>pci 0000:00:02.0: reg 10: [mem 0xe8400000-0xe847ffff]
>pci 0000:00:02.0: reg 14: [io  0x6000-0x6007]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xe8480000-0xe84bffff]
>pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
>pci 0000:00:02.1: reg 10: [mem 0xe8500000-0xe857ffff]
>pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xe8580000-0xe8583fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.3: PME# disabled
>pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0x6020-0x603f]
>pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0x6040-0x605f]
>pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0x6060-0x607f]
>pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
>pci 0000:00:1d.3: reg 20: [io  0x6080-0x609f]
>pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xe8584000-0xe85843ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
>pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0x60a0-0x60af]
>pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
>pci 0000:00:1f.2: reg 10: [io  0x13f0-0x13f7]
>pci 0000:00:1f.2: reg 14: [io  0x15f4-0x15f7]
>pci 0000:00:1f.2: reg 18: [io  0x1370-0x1377]
>pci 0000:00:1f.2: reg 1c: [io  0x1574-0x1577]
>pci 0000:00:1f.2: reg 20: [io  0x60d0-0x60df]
>pci 0000:00:1f.2: reg 24: [mem 0xe8585000-0xe85853ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:08:00.0: [8086:4222] type 0 class 0x000280
>pci 0000:08:00.0: reg 10: [mem 0xe8000000-0xe8000fff]
>pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:08:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 08-08]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xe8000000-0xe80fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1c.2: PCI bridge to [bus 18-18]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe7ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1c.3: PCI bridge to [bus 20-20]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:02:06.0: [104c:8039] type 2 class 0x000607
>pci 0000:02:06.0: reg 10: [mem 0xe8100000-0xe8100fff]
>pci 0000:02:06.0: supports D1 D2
>pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.0: PME# disabled
>pci 0000:02:06.1: [104c:803a] type 0 class 0x000c00
>pci 0000:02:06.1: reg 10: [mem 0xe8101000-0xe81017ff]
>pci 0000:02:06.1: reg 14: [mem 0xe8104000-0xe8107fff]
>pci 0000:02:06.1: supports D1 D2
>pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.1: PME# disabled
>pci 0000:02:06.2: [104c:803b] type 0 class 0x000180
>pci 0000:02:06.2: reg 10: [mem 0xe8108000-0xe8108fff]
>pci 0000:02:06.2: supports D1 D2
>pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.2: PME# disabled
>pci 0000:02:06.3: [104c:803c] type 0 class 0x000805
>pci 0000:02:06.3: reg 10: [mem 0xe8109000-0xe81090ff]
>pci 0000:02:06.3: supports D1 D2
>pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.3: PME# disabled
>pci 0000:02:06.4: [104c:803d] type 0 class 0x000780
>pci 0000:02:06.4: reg 10: [mem 0xe810a000-0xe810afff]
>pci 0000:02:06.4: reg 14: [mem 0xe810b000-0xe810bfff]
>pci 0000:02:06.4: supports D1 D2
>pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:06.4: PME# disabled
>pci 0000:02:0e.0: [14e4:169c] type 0 class 0x000200
>pci 0000:02:0e.0: reg 10: [mem 0xe8110000-0xe811ffff]
>pci 0000:02:0e.0: PME# supported from D3hot D3cold
>pci 0000:02:0e.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xe8100000-0xe83fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110112/pci_link-184)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000007f7d0000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [mem 0x00000000-0x0009ffff]
>pnp 00:00: [mem 0x000e0000-0x000fffff]
>pnp 00:00: [mem 0x00100000-0x7f7fffff]
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:01: [bus 00-ff]
>pnp 00:01: [io  0x0cf8-0x0cff]
>pnp 00:01: [io  0x0000-0x0cf7 window]
>pnp 00:01: [io  0x0d00-0xffff window]
>pnp 00:01: [mem 0x000a0000-0x000bffff window]
>pnp 00:01: [mem 0x7f800000-0xfedfffff window]
>pnp 00:01: [mem 0xfee01000-0xffffffff window]
>pnp 00:01: [mem 0x000d0000-0x000dffff window]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:02: [io  0x03f8-0x03ff]
>pnp 00:02: [irq 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
>pnp 00:03: [io  0x0378-0x037f]
>pnp 00:03: [io  0x0778-0x077a]
>pnp 00:03: [irq 7]
>pnp 00:03: [dma 1]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
>pnp 00:04: [io  0x0560-0x056f]
>pnp 00:04: [io  0x0570-0x057f]
>pnp 00:04: [mem 0xfed40000-0xfed44fff]
>pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x0000-0x000f]
>pnp 00:06: [io  0x0080-0x008f]
>pnp 00:06: [io  0x00c0-0x00df]
>pnp 00:06: [dma 4]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:07: [io  0x0061]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:08: [io  0x0070-0x0071]
>pnp 00:08: [io  0x0072-0x0073]
>pnp 00:08: [irq 8]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:09: [mem 0xfed00000-0xfed003ff]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0a: [io  0x0060]
>pnp 00:0a: [io  0x0064]
>pnp 00:0a: [irq 1]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:0b: [irq 12]
>pnp 00:0b: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
>pnp 00:0c: [io  0x0010-0x001f]
>pnp 00:0c: [io  0x0024-0x003f]
>pnp 00:0c: [io  0x004e-0x004f]
>pnp 00:0c: [io  0x0050-0x0053]
>pnp 00:0c: [io  0x0063]
>pnp 00:0c: [io  0x0065]
>pnp 00:0c: [io  0x0067]
>pnp 00:0c: [io  0x0074-0x0077]
>pnp 00:0c: [io  0x0090-0x009f]
>pnp 00:0c: [io  0x00a4-0x00bd]
>pnp 00:0c: [io  0x0500-0x055f]
>pnp 00:0c: [io  0x0800-0x080f]
>pnp 00:0c: [mem 0xffb00000-0xffbfffff]
>pnp 00:0c: [mem 0xfff00000-0xffffffff]
>system 00:0c: [io  0x0500-0x055f] has been reserved
>system 00:0c: [io  0x0800-0x080f] has been reserved
>system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [io  0x04d0-0x04d1]
>pnp 00:0d: [io  0x1000-0x107f]
>pnp 00:0d: [io  0x1100-0x113f]
>pnp 00:0d: [io  0x1200-0x121f]
>pnp 00:0d: [mem 0xf8000000-0xfbffffff]
>pnp 00:0d: [mem 0xfec00000-0xfec000ff]
>pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0d: [mem 0xfed90000-0xfed9afff]
>system 00:0d: [io  0x04d0-0x04d1] has been reserved
>system 00:0d: [io  0x1000-0x107f] has been reserved
>system 00:0d: [io  0x1100-0x113f] has been reserved
>system 00:0d: [io  0x1200-0x121f] has been reserved
>system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
>system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0d: [mem 0xfed90000-0xfed9afff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
>pnp 00:0e: [mem 0xfee00000-0xfee00fff]
>system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
>system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:1c.0: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
>pci 0000:00:1c.2: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.3: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x7000-0x7fff]
>pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
>pci 0000:00:1c.0: PCI bridge to [bus 08-08]
>pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
>pci 0000:00:1c.0:   bridge window [mem 0xe8000000-0xe80fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 18-18]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
>pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe7ffffff]
>pci 0000:00:1c.2:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.3: PCI bridge to [bus 20-20]
>pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci 0000:00:1c.3:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:02:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
>pci 0000:02:06.0: BAR 13: assigned [io  0x8000-0x80ff]
>pci 0000:02:06.0: BAR 14: assigned [io  0x8400-0x84ff]
>pci 0000:02:06.0: CardBus bridge to [bus 03-06]
>pci 0000:02:06.0:   bridge window [io  0x8000-0x80ff]
>pci 0000:02:06.0:   bridge window [io  0x8400-0x84ff]
>pci 0000:02:06.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:06.0:   bridge window [mem 0x88000000-0x8bffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 02-03]
>pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
>pci 0000:00:1e.0:   bridge window [mem 0xe8100000-0xe83fffff]
>pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
>pci_bus 0000:08: resource 1 [mem 0xe8000000-0xe80fffff]
>pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
>pci_bus 0000:18: resource 0 [io  0x4000-0x5fff]
>pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe7ffffff]
>pci_bus 0000:18: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
>pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
>pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]
>pci_bus 0000:20: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
>pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe83fffff]
>pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:03: resource 0 [io  0x8000-0x80ff]
>pci_bus 0000:03: resource 1 [io  0x8400-0x84ff]
>pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 1024 (order: 3, 32768 bytes)
>UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 4584k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1327134295.347:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4004
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.3: setting latency timer to 64
>pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004980000, using 1875k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>intel_idle: MWAIT substates: 0x22220
>intel_idle: does not run on family 6 model 15
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>TCP cubic registered
>Registering the dns_resolver key type
>PM: Checking hibernation image partition UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>psmouse.c: bad data from KBC - timeout
>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio2/input/input1
>psmouse.c: Failed to enable mouse on isa0060/serio2
>Refined TSC clocksource calibration: 1994.999 MHz.
>Switching to clocksource tsc
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>psmouse.c: Failed to enable mouse on isa0060/serio4
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 12:766:422
>rtc_cmos 00:08: setting system clock to 2012-01-21 08:24:57 UTC (1327134297)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 724k freed
>Write protecting the kernel read-only data: 6144k
>Freeing unused kernel memory: 8k freed
>Freeing unused kernel memory: 76k freed
>[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
>[Firmware Bug]: _BCQ is used instead of _BQC
>acpi device:02: registered as cooling_device0
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
>ACPI: Video Device [C083] (multi-head: yes  rom: no  post: no)
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
>ACPI: Sleep Button [C23F]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>ACPI: Lid Switch [C238]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>ACPI: Power Button [PWRF]
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm] initialized overlay support
>checking generic (d0000000 7b0000) vs hw (d0000000 10000000)
>fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 175x65
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.8-desktop-9.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 43
>ata2: DUMMY
>ata3: DUMMY
>ata4: DUMMY
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=0424, idProduct=2503
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>usb 1-8: new high speed USB device using ehci_hcd and address 3
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  2AC1 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 1-8: New USB device found, idVendor=04b4, idProduct=6560
>usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-8:1.0: USB hub found
>hub 1-8:1.0: 4 ports detected
>usb 1-1.1: new full speed USB device using ehci_hcd and address 4
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
>ata6: port disabled. ignoring.
>usb 1-1.1: New USB device found, idVendor=03f0, idProduct=171d
>usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.1: Product: HP Integrated Module
>usb 1-1.1: Manufacturer: Broadcom Corp
>usb 1-1.2: new full speed USB device using ehci_hcd and address 5
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
>ata5.00: configured for MWDMA2
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
>usb 1-1.2: New USB device found, idVendor=08ff, idProduct=2580
>usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-1.2: Product: Fingerprint Sensor
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>video LNXVIDEO:00: Restoring backlight state
>EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev[116]: starting version 166
>ACPI: AC Adapter [C1BA] (on-line)
>ACPI: acpi_idle registered with cpuidle
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ0] (31 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ1] (32 C)
>thermal LNXTHERM:02: registered as thermal_zone2
>ACPI: Thermal Zone [TZ2] (23 C)
>ACPI: Fan [C325] (off)
>ACPI: Fan [C326] (off)
>ACPI: Fan [C327] (off)
>ACPI: Fan [C328] (off)
>thermal LNXTHERM:03: registered as thermal_zone3
>ACPI: Thermal Zone [TZ3] (22 C)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>ACPI: Battery Slot [C1BC] (battery present)
>ACPI: Battery Slot [C1BB] (battery absent)
>thermal LNXTHERM:04: registered as thermal_zone4
>ACPI: Thermal Zone [TZ4] (34 C)
>tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
>wmi: Mapper loaded
>ppdev: user-space parallel port driver
>Non-volatile memory driver v1.3
>input: HP WMI hotkeys as /devices/virtual/input/input7
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
>sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
>tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
>yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
>yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a61b22, devctl 0x64
>yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
>yenta_cardbus 0000:02:06.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x8000-0x8fff]
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe8100000-0xe83fffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8100000-0xe83fffff: excluding 0xe8100000-0xe812ffff
>yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>parport_pc 00:03: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>EXT4-fs (sda11): re-mounted. Opts: acl
>EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
>Adding 4088504k swap on /dev/sda8.  Priority:-1 extents:1 across:4088504k 
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
>tg3.c:v3.116 (December 3, 2010)
>tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:0e.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:a4:d9:f0:e3
>tg3 0000:02:0e.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
>tg3 0000:02:0e.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:02:0e.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>leds_ss4200: no LED devices found
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
>iwl3945: Copyright(c) 2003-2010 Intel Corporation
>iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>iwl3945 0000:08:00.0: setting latency timer to 64
>iwl3945 0000:08:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
>iwl3945 0000:08:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:08:00.0: irq 44 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>firewire_core: created device fw0: GUID 00023f9929611f0e, S400
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
>NET: Registered protocol family 10
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945 0000:08:00.0: loaded firmware version 15.32.2.9
>iwl3945 0000:08:00.0: Error setting Tx power (-5).
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>iwl3945 0000:08:00.0: Error setting Tx power (-5).
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
>wlan0: direct probe to 00:19:cb:88:12:5e (try 1/3)
>wlan0: direct probe responded
>wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
>wlan0: authenticated
>wlan0: associate with 00:19:cb:88:12:5e (try 1)
>wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>ip_tables: (C) 2000-2006 Netfilter Core Team
>wlan0: deauthenticating from 00:19:cb:88:12:5e by local choice (reason=3)
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
>wlan0: authenticated
>wlan0: associate with 00:19:cb:88:12:5e (try 1)
>wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
>wlan0: associated
>wlan0: deauthenticating from 00:19:cb:88:12:5e by local choice (reason=3)
>cfg80211: Calling CRDA to update world regulatory domain
>cfg80211: World regulatory domain updated:
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
>wlan0: authenticated
>wlan0: associate with 00:19:cb:88:12:5e (try 1)
>wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
>wlan0: associated
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
>ctnetlink v0.93: registering with nfnetlink.
>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
>ip_set: protocol 6
>xt_time: kernel timezone is +0100
>u32 classifier
>    Actions configured
>wlan0: no IPv6 routers present
>IFWLOG: register target
>ata1.00: configured for UDMA/133
>ata1: EH complete
>EXT4-fs (sda11): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda10): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda9): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda1): re-mounted. Opts: commit=0
>EXT4-fs (sda6): re-mounted. Opts: commit=0
>EXT4-fs (sda12): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
>fuse init (API version 7.16)
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>CE: hpet increased min_delta_ns to 20113 nsec

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-desktop-9.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Tue Dec 20 09:45:44 UTC 2011
Command line: BOOT_IMAGE=linux root=UUID=39df3386-cfb8-48f8-bc71-f8dec27f608d resume=UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99 splash=silent pcie_aspm=force vga=788
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable)
 BIOS-e820: 000000007f7d0000 - 000000007f7e5600 (reserved)
 BIOS-e820: 000000007f7e5600 - 000000007f7f8000 (ACPI NVS)
 BIOS-e820: 000000007f7f8000 - 000000007f800000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Hewlett-Packard HP Compaq nx6320 (GA839PA#ABG)/30AA, BIOS 68YDU Ver. F.0B 12/15/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f7d0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base F7F800000 mask FFF800000 uncachable
  2 base 0FEDA0000 mask FFFFE0000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007f7d0000
 0000000000 - 007f600000 page 2M
 007f600000 - 007f7d0000 page 4k
kernel direct mapping tables up to 7f7d0000 @ 1fffc000-20000000
RAMDISK: 37b76000 - 37ff0000
ACPI: RSDP 00000000000f7bf0 00024 (v02 HP    )
ACPI: XSDT 000000007f7e57c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: FACP 000000007f7e5684 000F4 (v04 HP     30AA     00000003 HP   00000001)
ACPI: DSDT 000000007f7e5ac0 0FBDE (v01 HP       nc6340 00010000 MSFT 0100000E)
ACPI: FACS 000000007f7f7e80 00040
ACPI: SLIC 000000007f7e5838 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
ACPI: HPET 000000007f7e59b0 00038 (v01 HP     30AA     00000001 HP   00000001)
ACPI: APIC 000000007f7e59e8 00068 (v01 HP     30AA     00000001 HP   00000001)
ACPI: MCFG 000000007f7e5a50 0003C (v01 HP     30AA     00000001 HP   00000001)
ACPI: TCPA 000000007f7e5a8c 00032 (v02 HP     30AA     00000001 HP   00000001)
ACPI: SSDT 000000007f7f569e 00326 (v01 HP       HPQSAT 00000001 MSFT 0100000E)
ACPI: SSDT 000000007f7f6219 0025F (v01 HP      Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 000000007f7f6478 000A6 (v01 HP      Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 000000007f7f651e 004D7 (v01 HP        CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f7d0000
Initmem setup node 0 0000000000000000-000000007f7d0000
  NODE_DATA [000000007f7cb000 - 000000007f7cffff]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007f7d0
On node 0 totalpages: 522079
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3921 pages, LIFO batch:0
  DMA32 zone: 7084 pages used for memmap
  DMA32 zone: 511012 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f400000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007f400000 s76736 r8192 d21568 u1048576
pcpu-alloc: s76736 r8192 d21568 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514933
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=linux root=UUID=39df3386-cfb8-48f8-bc71-f8dec27f608d resume=UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99 splash=silent pcie_aspm=force vga=788
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2045468k/2088768k available (4069k kernel code, 452k absent, 42848k reserved, 3290k data, 724k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1994.942 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.88 BogoMIPS (lpj=1994942)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 16019 entries in 63 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1 Ok.
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7979.72 BogoMIPS).
devtmpfs: initialized
Time:  8:24:56  Date: 01/21/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000007f7f5a8c 0023D (v01 HP      Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0023D (v01 HP      Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 000000007f7f5d4e 004CB (v01 HP      Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 004CB (v01 HP      Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 000000007f7f59c4 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 000000007f7f5cc9 00085 (v01 HP      Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00085 (v01 HP      Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [C1F0] (on)
ACPI: Power Resource [C1FD] (on)
ACPI: Power Resource [C21A] (on)
ACPI: Power Resource [C222] (off)
ACPI: Power Resource [C321] (off)
ACPI: Power Resource [C322] (off)
ACPI: Power Resource [C323] (off)
ACPI: Power Resource [C324] (off)
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfedfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xe8400000-0xe847ffff]
pci 0000:00:02.0: reg 14: [io  0x6000-0x6007]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xe8480000-0xe84bffff]
pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xe8500000-0xe857ffff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xe8580000-0xe8583fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x6020-0x603f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x6040-0x605f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0x6060-0x607f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0x6080-0x609f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xe8584000-0xe85843ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x60a0-0x60af]
pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0x13f0-0x13f7]
pci 0000:00:1f.2: reg 14: [io  0x15f4-0x15f7]
pci 0000:00:1f.2: reg 18: [io  0x1370-0x1377]
pci 0000:00:1f.2: reg 1c: [io  0x1574-0x1577]
pci 0000:00:1f.2: reg 20: [io  0x60d0-0x60df]
pci 0000:00:1f.2: reg 24: [mem 0xe8585000-0xe85853ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:08:00.0: [8086:4222] type 0 class 0x000280
pci 0000:08:00.0: reg 10: [mem 0xe8000000-0xe8000fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xe8000000-0xe80fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe7ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 20-20]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:06.0: [104c:8039] type 2 class 0x000607
pci 0000:02:06.0: reg 10: [mem 0xe8100000-0xe8100fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.1: [104c:803a] type 0 class 0x000c00
pci 0000:02:06.1: reg 10: [mem 0xe8101000-0xe81017ff]
pci 0000:02:06.1: reg 14: [mem 0xe8104000-0xe8107fff]
pci 0000:02:06.1: supports D1 D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.1: PME# disabled
pci 0000:02:06.2: [104c:803b] type 0 class 0x000180
pci 0000:02:06.2: reg 10: [mem 0xe8108000-0xe8108fff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: [104c:803c] type 0 class 0x000805
pci 0000:02:06.3: reg 10: [mem 0xe8109000-0xe81090ff]
pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.3: PME# disabled
pci 0000:02:06.4: [104c:803d] type 0 class 0x000780
pci 0000:02:06.4: reg 10: [mem 0xe810a000-0xe810afff]
pci 0000:02:06.4: reg 14: [mem 0xe810b000-0xe810bfff]
pci 0000:02:06.4: supports D1 D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.4: PME# disabled
pci 0000:02:0e.0: [14e4:169c] type 0 class 0x000200
pci 0000:02:0e.0: reg 10: [mem 0xe8110000-0xe811ffff]
pci 0000:02:0e.0: PME# supported from D3hot D3cold
pci 0000:02:0e.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xe8100000-0xe83fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C096._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C102._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C115._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C118._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110112/pci_link-184)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000007f7d0000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000e0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x7f7fffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x7f800000-0xfedfffff window]
pnp 00:01: [mem 0xfee01000-0xffffffff window]
pnp 00:01: [mem 0x000d0000-0x000dffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io  0x03f8-0x03ff]
pnp 00:02: [irq 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:03: [io  0x0378-0x037f]
pnp 00:03: [io  0x0778-0x077a]
pnp 00:03: [irq 7]
pnp 00:03: [dma 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:04: [io  0x0560-0x056f]
pnp 00:04: [io  0x0570-0x057f]
pnp 00:04: [mem 0xfed40000-0xfed44fff]
pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0000-0x000f]
pnp 00:06: [io  0x0080-0x008f]
pnp 00:06: [io  0x00c0-0x00df]
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io  0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io  0x0070-0x0071]
pnp 00:08: [io  0x0072-0x0073]
pnp 00:08: [irq 8]
pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [io  0x0060]
pnp 00:0a: [io  0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0c: [io  0x0010-0x001f]
pnp 00:0c: [io  0x0024-0x003f]
pnp 00:0c: [io  0x004e-0x004f]
pnp 00:0c: [io  0x0050-0x0053]
pnp 00:0c: [io  0x0063]
pnp 00:0c: [io  0x0065]
pnp 00:0c: [io  0x0067]
pnp 00:0c: [io  0x0074-0x0077]
pnp 00:0c: [io  0x0090-0x009f]
pnp 00:0c: [io  0x00a4-0x00bd]
pnp 00:0c: [io  0x0500-0x055f]
pnp 00:0c: [io  0x0800-0x080f]
pnp 00:0c: [mem 0xffb00000-0xffbfffff]
pnp 00:0c: [mem 0xfff00000-0xffffffff]
system 00:0c: [io  0x0500-0x055f] has been reserved
system 00:0c: [io  0x0800-0x080f] has been reserved
system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io  0x04d0-0x04d1]
pnp 00:0d: [io  0x1000-0x107f]
pnp 00:0d: [io  0x1100-0x113f]
pnp 00:0d: [io  0x1200-0x121f]
pnp 00:0d: [mem 0xf8000000-0xfbffffff]
pnp 00:0d: [mem 0xfec00000-0xfec000ff]
pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
pnp 00:0d: [mem 0xfed90000-0xfed9afff]
system 00:0d: [io  0x04d0-0x04d1] has been reserved
system 00:0d: [io  0x1000-0x107f] has been reserved
system 00:0d: [io  0x1100-0x113f] has been reserved
system 00:0d: [io  0x1200-0x121f] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed9afff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
pnp 00:0e: [mem 0xfee00000-0xfee00fff]
system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x7000-0x7fff]
pci 0000:00:1e.0: BAR 13: assigned [io  0x8000-0x8fff]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.0:   bridge window [mem 0xe8000000-0xe80fffff]
pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe7ffffff]
pci 0000:00:1c.2:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 20-20]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.3:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
pci 0000:02:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:02:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:02:06.0: BAR 13: assigned [io  0x8000-0x80ff]
pci 0000:02:06.0: BAR 14: assigned [io  0x8400-0x84ff]
pci 0000:02:06.0: CardBus bridge to [bus 03-06]
pci 0000:02:06.0:   bridge window [io  0x8000-0x80ff]
pci 0000:02:06.0:   bridge window [io  0x8400-0x84ff]
pci 0000:02:06.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:02:06.0:   bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:1e.0:   bridge window [mem 0xe8100000-0xe83fffff]
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:08: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xe8000000-0xe80fffff]
pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
pci_bus 0000:18: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe7ffffff]
pci_bus 0000:18: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:20: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe83fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:03: resource 0 [io  0x8000-0x80ff]
pci_bus 0000:03: resource 1 [io  0x8400-0x84ff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4584k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1327134295.347:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4004
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004980000, using 1875k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=c8a3bc5d-1160-486e-af87-1a0bb14eaf99
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
psmouse.c: bad data from KBC - timeout
input: PS/2 Logitech Mouse as /devices/platform/i8042/serio2/input/input1
psmouse.c: Failed to enable mouse on isa0060/serio2
Refined TSC clocksource calibration: 1994.999 MHz.
Switching to clocksource tsc
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
psmouse.c: Failed to enable mouse on isa0060/serio4
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 12:766:422
rtc_cmos 00:08: setting system clock to 2012-01-21 08:24:57 UTC (1327134297)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 724k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 76k freed
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: _BCQ is used instead of _BQC
acpi device:02: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [C083] (multi-head: yes  rom: no  post: no)
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [C23F]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [C238]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
checking generic (d0000000 7b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 175x65
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-9.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.8-desktop-9.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 43
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=0424, idProduct=2503
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 3
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  2AC1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-8: New USB device found, idVendor=04b4, idProduct=6560
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using ehci_hcd and address 4
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata6: port disabled. ignoring.
usb 1-1.1: New USB device found, idVendor=03f0, idProduct=171d
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: HP Integrated Module
usb 1-1.1: Manufacturer: Broadcom Corp
usb 1-1.2: new full speed USB device using ehci_hcd and address 5
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
ata5.00: configured for MWDMA2
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
usb 1-1.2: New USB device found, idVendor=08ff, idProduct=2580
usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.2: Product: Fingerprint Sensor
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[116]: starting version 166
ACPI: AC Adapter [C1BA] (on-line)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (31 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (32 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ2] (23 C)
ACPI: Fan [C325] (off)
ACPI: Fan [C326] (off)
ACPI: Fan [C327] (off)
ACPI: Fan [C328] (off)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (22 C)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
ACPI: Battery Slot [C1BC] (battery present)
ACPI: Battery Slot [C1BB] (battery absent)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (34 C)
tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
wmi: Mapper loaded
ppdev: user-space parallel port driver
Non-volatile memory driver v1.3
input: HP WMI hotkeys as /devices/virtual/input/input7
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
sdhci-pci 0000:02:06.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO
tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a61b22, devctl 0x64
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x8000-0x8fff]
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe8100000-0xe83fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8100000-0xe83fffff: excluding 0xe8100000-0xe812ffff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
EXT4-fs (sda11): re-mounted. Opts: acl
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
Adding 4088504k swap on /dev/sda8.  Priority:-1 extents:1 across:4088504k 
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
tg3.c:v3.116 (December 3, 2010)
tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:0e.0: eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:a4:d9:f0:e3
tg3 0000:02:0e.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
tg3 0000:02:0e.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:0e.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
leds_ss4200: no LED devices found
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
iwl3945 0000:08:00.0: setting latency timer to 64
iwl3945 0000:08:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
iwl3945 0000:08:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:08:00.0: irq 44 for MSI/MSI-X
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
firewire_core: created device fw0: GUID 00023f9929611f0e, S400
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
NET: Registered protocol family 10
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:08:00.0: loaded firmware version 15.32.2.9
iwl3945 0000:08:00.0: Error setting Tx power (-5).
ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwl3945 0000:08:00.0: Error setting Tx power (-5).
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
wlan0: direct probe to 00:19:cb:88:12:5e (try 1/3)
wlan0: direct probe responded
wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
wlan0: authenticated
wlan0: associate with 00:19:cb:88:12:5e (try 1)
wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
wlan0: deauthenticating from 00:19:cb:88:12:5e by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
wlan0: authenticated
wlan0: associate with 00:19:cb:88:12:5e (try 1)
wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 00:19:cb:88:12:5e by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan0: authenticate with 00:19:cb:88:12:5e (try 1)
wlan0: authenticated
wlan0: associate with 00:19:cb:88:12:5e (try 1)
wlan0: RX AssocResp from 00:19:cb:88:12:5e (capab=0x431 status=0 aid=1)
wlan0: associated
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ctnetlink v0.93: registering with nfnetlink.
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
ip_set: protocol 6
xt_time: kernel timezone is +0100
u32 classifier
    Actions configured
wlan0: no IPv6 routers present
IFWLOG: register target
ata1.00: configured for UDMA/133
ata1: EH complete
EXT4-fs (sda11): re-mounted. Opts: acl,commit=0
EXT4-fs (sda10): re-mounted. Opts: acl,commit=0
EXT4-fs (sda9): re-mounted. Opts: acl,commit=0
EXT4-fs (sda1): re-mounted. Opts: commit=0
EXT4-fs (sda6): re-mounted. Opts: commit=0
EXT4-fs (sda12): re-mounted. Opts: acl,commit=0
EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
fuse init (API version 7.16)
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
CE: hpet increased min_delta_ns to 20113 nsec

Actions: View

Attachments on bug 4215: 1401