Attachment 1396 Details for Bug 4097 – alpha3 kdmrc

alpha3 kdmrc

kdmrc (text/plain), 21.18 KB, created by Bit Twister on 2012-01-20 14:14:46 CET

(hide)

Description:

Filename:

MIME Type:

Creator: Bit Twister

Created: 2012-01-20 14:14:46 CET

Size: 21.18 KB

patch

obsolete

># KDM master configuration file
>#
># Definition: the greeter is the login dialog, i.e., the part of KDM
># which the user sees.
>#
># You can configure every X-display individually.
># Every display has a display name, which consists of a host name
># (which is empty for local displays specified in {Static|Reserve}Servers),
># a colon, and a display number. Additionally, a display belongs to a
># display class (which can be ignored in most cases; the control center
># does not support this feature at all).
># Sections with display-specific settings have the formal syntax
># "[X-" host [":" number [ "_" class ]] "-" sub-section "]"
># You can use the "*" wildcard for host, number, and class. You may omit
># trailing components; they are assumed to be "*" then.
># The host part may be a domain specification like ".inf.tu-dresden.de".
># It may also be "+", which means non-empty, i.e. remote displays only.
># From which section a setting is actually taken is determined by these
># rules:
># - an exact match takes precedence over a partial match (for the host part),
>#   which in turn takes precedence over a wildcard ("+" taking precedence
>#   over "*")
># - precedence decreases from left to right for equally exact matches
># Example: display name "myhost:0", class "dpy".
># [X-myhost:0_dpy] precedes
># [X-myhost:0_*] (same as [X-myhost:0]) precedes
># [X-myhost:*_dpy] precedes
># [X-myhost:*_*] (same as [X-myhost]) precedes
># [X-+:0_dpy] precedes
># [X-*:0_dpy] precedes
># [X-*:0_*] (same as [X-*:0]) precedes
># [X-*:*_*] (same as [X-*])
># These sections do NOT match this display:
># [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*]
># If a setting is not found in any matching section, the default is used.
>#
># Every comment applies to the following section or key. Note that all
># comments will be lost if you change this file with the kcontrol frontend.
># The defaults refer to KDM's built-in values, not anything set in this file.
>#
># Special characters need to be backslash-escaped (leading and trailing
># spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the
># backslash itself (\\)).
># In lists, fields are separated with commas without whitespace in between.
># Some command strings are subject to simplified sh-style word splitting:
># single quotes (') and double quotes (") have the usual meaning; the backslash
># quotes everything (not only special characters). Note that the backslashes
># need to be doubled because of the two levels of quoting.
>
>[General]
># This option exists solely for the purpose of a clean automatic upgrade.
># Do not even think about changing it!
>ConfigVersion=2.3
># List of permanent displays. Displays with a hostname are foreign. A display
># class may be specified separated by an underscore.
># Default is ":0"
>StaticServers=:0
># List of on-demand displays. See StaticServers for syntax.
># Default is ""
>ReserveServers=:1,:2,:3,:4,:5
># VTs to allocate to X-servers. A negative number means that the VT will be
># used only if it is free. If all VTs in this list are used up, the next free
># one greater than the last one in this list will be allocated.
># Default is ""
>ServerVTs=-7
># TTYs (without /dev/) to monitor for activity while in console mode.
># Default is ""
>ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
># Where KDM should store its PID (do not store if empty).
># Default is ""
>PidFile=/var/run/kdm.pid
># Whether KDM should lock the PID file to prevent having multiple KDM
># instances running at once. Do not change unless you are brave.
># Default is true
>#LockPidFile=false
># Where to store authorization files.
># Default is "/var/run/xauth"
>#AuthDir=/tmp
># Whether KDM should automatically re-read configuration files, if it
># finds them having changed.
># Default is true
>#AutoRescan=false
># Additional environment variables KDM should pass on to all programs it runs.
># LD_LIBRARY_PATH and XCURSOR_THEME are good candidates;
># otherwise, it should not be necessary very often.
># Default is ""
>#ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR
># A character device KDM should read entropy from.
># Empty means use the system's preferred entropy device.
># Default is ""
>#RandomDevice=/dev/altrandom
># Where the command FiFos should be created; make it empty to disable
># them.
># Default is "/var/run/xdmctl"
>#FifoDir=/tmp
># The group to which the global command FiFo should belong;
># can be either a name or a numerical ID.
># Default is 0
>#FifoGroup=xdmctl
># The directory in which KDM should store persistent working data.
># Default is "/var/lib/kdm"
>#DataDir=
># The directory in which KDM should store users' .dmrc files. This is only
># needed if the home directories are not readable before actually logging in
># (like with AFS).
># Default is ""
>#DmrcDir=/nfs-shared/var/dmrcs
>
>[Xdmcp]
># Whether KDM should listen to incoming XDMCP requests.
># Default is true
>Enable=false
># The UDP port on which KDM should listen for XDMCP requests. Do not change.
># Default is 177
>#Port=177
># File with the private keys of X-terminals. Required for XDM authentication.
># Default is ""
>#KeyFile=/usr/share/config/kdm/kdmkeys
># XDMCP access control file in the usual XDM-Xaccess format.
># Default is "/usr/share/config/kdm/Xaccess"
>Xaccess=/etc/X11/xdm/Xaccess
># Number of seconds to wait for display to respond after the user has
># selected a host from the chooser.
># Default is 15
>#ChoiceTimeout=10
># Strip domain name from remote display names if it is equal to the local
># domain.
># Default is true
>#RemoveDomainname=false
># Use the numeric IP address of the incoming connection on multihomed hosts
># instead of the host name.
># Default is false
>#SourceAddress=true
># The program which is invoked to dynamically generate replies to XDMCP
># DirectQuery or BroadcastQuery requests.
># If empty, no program is invoked and "Willing to manage" is sent.
># Default is ""
>Willing=/usr/share/X11/xdm/Xwilling
>
>[Shutdown]
># The command (subject to word splitting) to run to halt the system.
># Default is "/sbin/poweroff"
>HaltCmd=/sbin/poweroff
># The command (subject to word splitting) to run to reboot the system.
># Default is "/sbin/reboot"
>RebootCmd=/usr/bin/reboot
># Whether it is allowed to shut down the system via the global command FiFo.
># Default is false
>#AllowFifo=true
># Whether it is allowed to abort active sessions when shutting down the
># system via the global command FiFo.
># Default is true
>#AllowFifoNow=false
># The boot manager KDM should use for offering boot options in the
># shutdown dialog.
># "None" - no boot manager
># "Grub" - Grub boot manager
># "Lilo" - Lilo boot manager (Linux on i386 &amp; x86-64 only)
># Default is None
>BootManager=Grub
>
># Rough estimations about how many seconds KDM will spend at most on
># - opening a connection to the X-server (OpenTime) if the attempt
>#   - times out: OpenTimeout
>#   - is refused: OpenRepeat * OpenDelay
># - starting a local X-server (ServerTime):
>#   ServerAttempts * (ServerTimeout + OpenDelay)
># - starting a display:
>#   - local display: ServerTime + OpenTime
>#   - foreign display: StartAttempts * OpenTime
>#   - XDMCP display: OpenTime (repeated indefinitely by client)
>
># Core config for all displays
>[X-*-Core]
># How long to wait before retrying to connect a display.
># Default is 15
>#OpenDelay=15
># How long to wait before timing out a display connection attempt.
># Default is 120
>#OpenTimeout=120
># How many connection attempts to make during a start attempt. Note that
># a timeout aborts the entire start attempt.
># Default is 5
>#OpenRepeat=5
># Try at most that many times to start a display. If this fails, the display
># is disabled.
># Default is 4
>#StartAttempts=4
># Additional arguments for the X-servers for local sessions.
># This string is subject to word splitting.
># Default is "-nolisten tcp"
>ServerArgsLocal=-nolisten tcp
># Ping remote display every that many minutes.
># Default is 5
>#PingInterval=5
># Wait for a Pong that many minutes.
># Default is 5
>#PingTimeout=5
># The name of this X-server's Xauth file.
># If empty, a random name in the AuthDir directory will be used.
># Default is ""
>#AuthFile=
># Specify a file with X-resources for the greeter, chooser and background.
># The KDE frontend does not use this file, so you do not need it unless you
># use another background generator than krootimage.
># Default is ""
>Resources=/etc/X11/xdm/Xresources
># The xrdb program to use to read the above specified recources.
># Subject to word splitting.
># Default is "/usr/bin/xrdb"
>#Xrdb=
># A program to run before the greeter is shown. Can be used to start an
># xconsole or an alternative background generator. Subject to word splitting.
># Default is ""
>Setup=/usr/share/X11/xdm/Xsetup_0
># A program to run before a user session starts. Subject to word splitting.
># Default is ""
>Startup=/usr/share/X11/xdm/GiveConsole
># A program to run after a user session exits. Subject to word splitting.
># Default is ""
>Reset=/usr/share/X11/xdm/TakeConsole
># The program which is run as the user which logs in. It is supposed to
># interpret the session argument (see SessionsDirs) and start an appropriate
># session according to it. Subject to word splitting.
># Default is "/usr/bin/xterm -ls -T"
>Session=/usr/share/X11/xdm/Xsession
># The program to run if Session fails.
># Default is "/usr/bin/xterm"
>FailsafeClient=/usr/bin/xterm
># The PATH for the Session program.
># Default is "/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
>UserPath=/usr/bin:/bin:/usr/local/bin:/usr/X11R6/bin/
># The PATH for Setup, Startup and Reset, etc.
># Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin"
>SystemPath=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
># The default system shell.
># Default is "/bin/sh"
>#SystemShell=/bin/bash
># Where to put the user's X-server authorization file if ~/.Xauthority
># cannot be created.
># Default is "/tmp"
>#UserAuthDir=
># Whether to automatically restart sessions after X-server crashes.
># Note that enabling this makes circumventing screen lockers other than
># KDE's built-in one possible!
># Default is false
>AutoReLogin=false
># Allow root logins?
># Default is true
>AllowRootLogin=false
># Allow to log in, when user has set an empty password?
># Default is true
>AllowNullPasswd=true
># Who is allowed to shut down the system. This applies both to the
># greeter and to the command FiFo.
># "None" - no "Shutdown..." menu entry is shown at all
># "Root" - the root password must be entered to shut down
># "All" - everybody can shut down the machine
># Default is All
>AllowShutdown=All
># Who is allowed to abort active sessions when shutting down.
># "None" - no forced shutdown is allowed at all
># "Root" - the root password must be entered to shut down forcibly
># "All" - everybody can shut down the machine forcibly
># Default is All
>#AllowSdForceNow=Root
># The default choice for the shutdown condition/timing.
># "Schedule" - shut down after all active sessions exit (possibly at once)
># "TryNow" - shut down, if no active sessions are open; otherwise, do nothing
># "ForceNow" - shut down unconditionally
># Default is Schedule
>#DefaultSdMode=ForceNow
># How to offer shutdown scheduling options:
># "Never" - not at all
># "Optional" - as a button in the simple shutdown dialogs
># "Always" - instead of the simple shutdown dialogs
># Default is Never
>#ScheduledSd=Optional
># The directories containing session type definitions in .desktop format.
># Default is "/usr/share/apps/kdm/sessions"
>#SessionsDirs=/etc/X11/sessions,/usr/share/xsessions
># The file (relative to $HOME) to redirect the session output to. This is
># a printf format string; one %s will be replaced with the display name.
># Default is ".xsession-errors"
>ClientLogFile=.xsession-errors
># Whether KDM's built-in utmp/wtmp/lastlog registration should be used.
># Default is true
>#UseSessReg=false
>
># Greeter config for all displays
>[X-*-Greeter]
># Widget style of the greeter. "" means the built-in default which currently
># is "Plastik".
># Default is ""
>GUIStyle=Oxygen
># Widget color scheme of the greeter. "" means the built-in default which
># currently is yellowish grey with some light blue and yellow elements.
># Default is ""
>ColorScheme=Oxygen
># What should be shown in the greeter's logo are:
># "None" - nothing
># "Logo" - the image specified by LogoPixmap
># "Clock" - a neat analog clock
># Default is Clock
>LogoArea=None
># The image to show when LogoArea=Logo.
># Default is ""
>LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
># The relative coordinates (X,Y in percent) of the center of the greeter.
># Default is "50,50"
>#GreeterPos=30,40
># The screen the greeter should be displayed on in multi-headed and Xinerama
># setups. The numbering starts with 0. For Xinerama, it corresponds to the
># listing order in the active ServerLayout section of XF86Config; -1 means
># to use the upper-left screen, -2 means to use the upper-right screen.
># Default is 0
>#GreeterScreen=-1
># The headline in the greeter. The following character pairs are replaced:
># - %d -> current display
># - %h -> host name, possibly with domain name
># - %n -> node name, most probably the host name without domain name
># - %s -> the operating system
># - %r -> the operating system's version
># - %m -> the machine (hardware) type
># - %% -> a single %
># Default is "Welcome on %n"
>GreetString=Welcome to %n
># Whether the fonts used in the greeter should be antialiased.
># Default is false
>AntiAliasing=true
># The font for the greeter headline.
># Default is "Serif,20,bold"
>GreetFont=Sans,24,-1,5,50,0,0,0,0,0
># The normal font used in the greeter.
># Default is "Sans Serif,10"
>StdFont=Sans,12,-1,5,50,0,0,0,0,0
># The font used for the "Login Failed" message.
># Default is "Sans Serif,10,bold"
>FailFont=Sans,12,-1,5,75,0,0,0,0,0
># What to do with the Num Lock modifier for the time the greeter is running:
># "Off" - turn off
># "On" - turn on
># "Keep" - do not change the state
># Default is Keep
>#NumLock=Off
># Language and locale to use in the greeter, encoded like $LC_LANG.
># Default is "en_US"
># Language=en_US
># Enable autocompletion in the username line edit.
># Default is false
>#UserCompletion=true
># Enable user list (names along with images) in the greeter.
># Default is true
>#UserList=false
># User selection for UserCompletion and UserList:
># "NotHidden" - all users except those listed in HiddenUsers
># "Selected" - only the users listed in SelectedUsers
># Default is NotHidden
>ShowUsers=NotHidden
># For ShowUsers=Selected. @<group> means all users in that group.
># Default is ""
>SelectedUsers=
># For ShowUsers=NotHidden. @<group> means all users in that group.
># Default is ""
>HiddenUsers=nobody,root
># Special case of HiddenUsers: users with a non-zero UID less than this number
># will not be shown as well.
># Default is 0
>MinShowUID=500
># Complement to MinShowUID: users with a UID greater than this number will
># not be shown as well.
># Default is 65535
>MaxShowUID=65000
># If false, the users are listed in the order they appear in /etc/passwd.
># If true, they are sorted alphabetically.
># Default is true
>SortUsers=true
># Specify, where the users' pictures should be taken from.
># "AdminOnly" - from <FaceDir>/$USER.face[.icon]
># "PreferAdmin" - prefer <FaceDir>, fallback on $HOME
># "PreferUser" - ... and the other way round
># "UserOnly" - from the user's $HOME/.face[.icon]
># Default is AdminOnly
>FaceSource=PreferUser
># The directory containing the user images if FaceSource is not UserOnly.
># Default is "/usr/share/apps/kdm/faces"
>FaceDir=/usr/share/faces
># Specify, if/which user should be preselected for log in.
># "None" - do not preselect any user
># "Previous" - the user which successfully logged in last time
># "Default" - the user specified in the DefaultUser option
># Default is None
>PreselectUser=None
># If this is true, the password input line is focused automatically if
># a user is preselected.
># Default is false
>FocusPasswd=true
># The password input fields cloak the typed in text.
># If this is true, the entered password is echoed as bullets. Otherwise,
># no feedback is given at all.
>EchoPasswd=true
># If true, krootimage will be automatically started by KDM; otherwise, the
># Setup script should be used to setup the background.
># Default is true
>#UseBackground=false
># The configuration file to be used by krootimage.
># Default is "/usr/share/config/kdm/backgroundrc"
>#BackgroundCfg=
># Hold the X-server grabbed the whole time the greeter is visible. This
># may be more secure, but it will disable any background and other
># X-clients started from the Setup script.
># Default is false
>#GrabServer=true
># How many seconds to wait for grab to succeed.
># Default is 3
>#GrabTimeout=3
># Warn, if display has no X-authorization (local auth cannot be created,
># XDMCP display wants no auth, or display is foreign from StaticServers).
># Default is true
>#AuthComplain=false
># Random seed for forging saved session types, etc. of unknown users.
># This value should be random but constant across the login domain.
># Default is 0
>ForgingSeed=1145020279
># Specify conversation plugins for the login dialog. Each plugin can be
># specified as a base name (which expands to $kde_modulesdir/kgreet_$base)
># or as a full pathname.
># Default is "classic"
>#PluginsLogin=sign
># Same as PluginsLogin, but for the shutdown dialog.
># Default is "classic"
>PluginsLogin=classic
>#PluginsShutdown=modern
># A list of options of the form Key=Value. The conversation plugins can query
># these settings; it is up to them what possible keys are.
># Default is ""
>#PluginOptions=SomeKey=randomvalue,Foo=bar
># Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs
># is configured).
># Default is true
>#AllowConsole=false
># A program to run while the greeter is visible. It is supposed to preload
># as much as possible of the session that is going to be started (most
># probably).
># Default is ""
>Preloader=/usr/bin/preloadkde
># Whether the greeter should be themed.
># Default is false
>UseTheme=true
># The theme to use for the greeter. Can point to either a directory or an XML
># file.
># Default is ""
>Theme=/usr/share/apps/kdm/themes/mageia-kde4
>
># Core config for local displays
>[X-:*-Core]
># How often to try to run the X-server. Running includes executing it and
># waiting for it to come up.
># Default is 1
>#ServerAttempts=1
># How long to wait for a local X-server to come up.
># Default is 15
>ServerTimeout=120
># The command line to start the X-server, without display number and VT spec.
># This string is subject to word splitting.
># Default is "/usr/bin/X -br"
>ServerCmd=/usr/bin/X
># Additional arguments for the X-servers for local sessions.
># This string is subject to word splitting. Default is ""
>ServerArgsLocal=
># Additional arguments for the X-servers for remote sessions.
># This string is subject to word splitting.
># Default is ""
>#ServerArgsRemote=
># Restart instead of resetting the local X-server after session exit.
># Use it if the server leaks memory etc.
># Default is false
>TerminateServer=true
># The signal needed to reset the local X-server.
># Default is 1 (SIGHUP)
>#ResetSignal=1
># The signal needed to terminate the local X-server.
># Default is 15 (SIGTERM)
>#TermSignal=15
># Create X-authorizations for local displays.
># Default is true
>#Authorize=false
># Which X-authorization mechanisms should be used.
># Default is "MIT-MAGIC-COOKIE-1"
>#AuthNames=
># Need to reset the X-server to make it read initial Xauth file.
># Default is false
>#ResetForAuth=true
># See above
>AllowNullPasswd=
># See above
>AllowShutdown=
># Enable password-less logins on this display. USE WITH EXTREME CARE!
># Default is false
>NoPassEnable=false
># The users that do not need to provide a password to log in. NEVER list root!
># "*" means all non-root users. @<group> means all users in that group.
># Default is ""
>NoPassUsers=
>AllowShutdown=All
>
># Greeter config for local displays
>[X-:*-Greeter]
># See above
>PreselectUser=
># See above
>FocusPasswd=
># Specify whether the greeter of local displays should start up in host chooser
># (remote) or login (local) mode and whether it is allowed to switch to the
># other mode.
># "LocalOnly" - only local login possible
># "DefaultLocal" - start up in local mode, but allow switching to remote mode
># "DefaultRemote" - ... and the other way round
># "RemoteOnly" - only choice of remote host possible
># Default is LocalOnly
>LoginMode=DefaultLocal
># A list of hosts to be automatically added to the remote login menu. The
># special name "*" means broadcast.
># Default is "*"
>#ChooserHosts=*,ugly,sky,dino,kiste.local,login.crap.com
># Show the "Restart X Server"/"Close Connection" action in the greeter.
># Default is true
>#AllowClose=false
>
># Core config for 1st local display
>[X-:0-Core]
># The VT the X-server should run on; auto-assign if zero, don't assign if -1.
># Better leave it zero and use ServerVTs.
># Default is 0
>#ServerVT=7
># Enable automatic login. USE WITH EXTREME CARE!
># Default is false
>AutoLoginEnable=false
># If true, auto-login after logout. If false, auto-login is performed only
># when a display session starts up.
># Default is false
>#AutoLoginAgain=true
># The delay in seconds before automatic login kicks in.
># Default is 0
>#AutoLoginDelay=10
># The user to log in automatically. NEVER specify root!
># Default is ""
>AutoLoginUser=
># The password for the user to log in automatically. This is NOT required
># unless the user is logged into a NIS or Kerberos domain. If you use this
># option, you should "chmod 600 kdmrc" for obvious reasons.
># Default is ""
>#AutoLoginPass=secret!
># Immediately lock the automatically started session. This works only with
># KDE sessions.
># Default is false
>#AutoLoginLocked=true
># See above
>ClientLogFile=
>
># Greeter config for 1st local display
>[X-:0-Greeter]
># See above
>#PreselectUser=Default
># The user to preselect if PreselectUser=Default.
># Default is ""

# KDM master configuration file
#
# Definition: the greeter is the login dialog, i.e., the part of KDM
# which the user sees.
#
# You can configure every X-display individually.
# Every display has a display name, which consists of a host name
# (which is empty for local displays specified in {Static|Reserve}Servers),
# a colon, and a display number. Additionally, a display belongs to a
# display class (which can be ignored in most cases; the control center
# does not support this feature at all).
# Sections with display-specific settings have the formal syntax
# "[X-" host [":" number [ "_" class ]] "-" sub-section "]"
# You can use the "*" wildcard for host, number, and class. You may omit
# trailing components; they are assumed to be "*" then.
# The host part may be a domain specification like ".inf.tu-dresden.de".
# It may also be "+", which means non-empty, i.e. remote displays only.
# From which section a setting is actually taken is determined by these
# rules:
# - an exact match takes precedence over a partial match (for the host part),
#   which in turn takes precedence over a wildcard ("+" taking precedence
#   over "*")
# - precedence decreases from left to right for equally exact matches
# Example: display name "myhost:0", class "dpy".
# [X-myhost:0_dpy] precedes
# [X-myhost:0_*] (same as [X-myhost:0]) precedes
# [X-myhost:*_dpy] precedes
# [X-myhost:*_*] (same as [X-myhost]) precedes
# [X-+:0_dpy] precedes
# [X-*:0_dpy] precedes
# [X-*:0_*] (same as [X-*:0]) precedes
# [X-*:*_*] (same as [X-*])
# These sections do NOT match this display:
# [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*]
# If a setting is not found in any matching section, the default is used.
#
# Every comment applies to the following section or key. Note that all
# comments will be lost if you change this file with the kcontrol frontend.
# The defaults refer to KDM's built-in values, not anything set in this file.
#
# Special characters need to be backslash-escaped (leading and trailing
# spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the
# backslash itself (\\)).
# In lists, fields are separated with commas without whitespace in between.
# Some command strings are subject to simplified sh-style word splitting:
# single quotes (') and double quotes (") have the usual meaning; the backslash
# quotes everything (not only special characters). Note that the backslashes
# need to be doubled because of the two levels of quoting.

[General]
# This option exists solely for the purpose of a clean automatic upgrade.
# Do not even think about changing it!
ConfigVersion=2.3
# List of permanent displays. Displays with a hostname are foreign. A display
# class may be specified separated by an underscore.
# Default is ":0"
StaticServers=:0
# List of on-demand displays. See StaticServers for syntax.
# Default is ""
ReserveServers=:1,:2,:3,:4,:5
# VTs to allocate to X-servers. A negative number means that the VT will be
# used only if it is free. If all VTs in this list are used up, the next free
# one greater than the last one in this list will be allocated.
# Default is ""
ServerVTs=-7
# TTYs (without /dev/) to monitor for activity while in console mode.
# Default is ""
ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
# Where KDM should store its PID (do not store if empty).
# Default is ""
PidFile=/var/run/kdm.pid
# Whether KDM should lock the PID file to prevent having multiple KDM
# instances running at once. Do not change unless you are brave.
# Default is true
#LockPidFile=false
# Where to store authorization files.
# Default is "/var/run/xauth"
#AuthDir=/tmp
# Whether KDM should automatically re-read configuration files, if it
# finds them having changed.
# Default is true
#AutoRescan=false
# Additional environment variables KDM should pass on to all programs it runs.
# LD_LIBRARY_PATH and XCURSOR_THEME are good candidates;
# otherwise, it should not be necessary very often.
# Default is ""
#ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR
# A character device KDM should read entropy from.
# Empty means use the system's preferred entropy device.
# Default is ""
#RandomDevice=/dev/altrandom
# Where the command FiFos should be created; make it empty to disable
# them.
# Default is "/var/run/xdmctl"
#FifoDir=/tmp
# The group to which the global command FiFo should belong;
# can be either a name or a numerical ID.
# Default is 0
#FifoGroup=xdmctl
# The directory in which KDM should store persistent working data.
# Default is "/var/lib/kdm"
#DataDir=
# The directory in which KDM should store users' .dmrc files. This is only
# needed if the home directories are not readable before actually logging in
# (like with AFS).
# Default is ""
#DmrcDir=/nfs-shared/var/dmrcs

[Xdmcp]
# Whether KDM should listen to incoming XDMCP requests.
# Default is true
Enable=false
# The UDP port on which KDM should listen for XDMCP requests. Do not change.
# Default is 177
#Port=177
# File with the private keys of X-terminals. Required for XDM authentication.
# Default is ""
#KeyFile=/usr/share/config/kdm/kdmkeys
# XDMCP access control file in the usual XDM-Xaccess format.
# Default is "/usr/share/config/kdm/Xaccess"
Xaccess=/etc/X11/xdm/Xaccess
# Number of seconds to wait for display to respond after the user has
# selected a host from the chooser.
# Default is 15
#ChoiceTimeout=10
# Strip domain name from remote display names if it is equal to the local
# domain.
# Default is true
#RemoveDomainname=false
# Use the numeric IP address of the incoming connection on multihomed hosts
# instead of the host name.
# Default is false
#SourceAddress=true
# The program which is invoked to dynamically generate replies to XDMCP
# DirectQuery or BroadcastQuery requests.
# If empty, no program is invoked and "Willing to manage" is sent.
# Default is ""
Willing=/usr/share/X11/xdm/Xwilling

[Shutdown]
# The command (subject to word splitting) to run to halt the system.
# Default is "/sbin/poweroff"
HaltCmd=/sbin/poweroff
# The command (subject to word splitting) to run to reboot the system.
# Default is "/sbin/reboot"
RebootCmd=/usr/bin/reboot
# Whether it is allowed to shut down the system via the global command FiFo.
# Default is false
#AllowFifo=true
# Whether it is allowed to abort active sessions when shutting down the
# system via the global command FiFo.
# Default is true
#AllowFifoNow=false
# The boot manager KDM should use for offering boot options in the
# shutdown dialog.
# "None" - no boot manager
# "Grub" - Grub boot manager
# "Lilo" - Lilo boot manager (Linux on i386 &amp; x86-64 only)
# Default is None
BootManager=Grub

# Rough estimations about how many seconds KDM will spend at most on
# - opening a connection to the X-server (OpenTime) if the attempt
#   - times out: OpenTimeout
#   - is refused: OpenRepeat * OpenDelay
# - starting a local X-server (ServerTime):
#   ServerAttempts * (ServerTimeout + OpenDelay)
# - starting a display:
#   - local display: ServerTime + OpenTime
#   - foreign display: StartAttempts * OpenTime
#   - XDMCP display: OpenTime (repeated indefinitely by client)

# Core config for all displays
[X-*-Core]
# How long to wait before retrying to connect a display.
# Default is 15
#OpenDelay=15
# How long to wait before timing out a display connection attempt.
# Default is 120
#OpenTimeout=120
# How many connection attempts to make during a start attempt. Note that
# a timeout aborts the entire start attempt.
# Default is 5
#OpenRepeat=5
# Try at most that many times to start a display. If this fails, the display
# is disabled.
# Default is 4
#StartAttempts=4
# Additional arguments for the X-servers for local sessions.
# This string is subject to word splitting.
# Default is "-nolisten tcp"
ServerArgsLocal=-nolisten tcp
# Ping remote display every that many minutes.
# Default is 5
#PingInterval=5
# Wait for a Pong that many minutes.
# Default is 5
#PingTimeout=5
# The name of this X-server's Xauth file.
# If empty, a random name in the AuthDir directory will be used.
# Default is ""
#AuthFile=
# Specify a file with X-resources for the greeter, chooser and background.
# The KDE frontend does not use this file, so you do not need it unless you
# use another background generator than krootimage.
# Default is ""
Resources=/etc/X11/xdm/Xresources
# The xrdb program to use to read the above specified recources.
# Subject to word splitting.
# Default is "/usr/bin/xrdb"
#Xrdb=
# A program to run before the greeter is shown. Can be used to start an
# xconsole or an alternative background generator. Subject to word splitting.
# Default is ""
Setup=/usr/share/X11/xdm/Xsetup_0
# A program to run before a user session starts. Subject to word splitting.
# Default is ""
Startup=/usr/share/X11/xdm/GiveConsole
# A program to run after a user session exits. Subject to word splitting.
# Default is ""
Reset=/usr/share/X11/xdm/TakeConsole
# The program which is run as the user which logs in. It is supposed to
# interpret the session argument (see SessionsDirs) and start an appropriate
# session according to it. Subject to word splitting.
# Default is "/usr/bin/xterm -ls -T"
Session=/usr/share/X11/xdm/Xsession
# The program to run if Session fails.
# Default is "/usr/bin/xterm"
FailsafeClient=/usr/bin/xterm
# The PATH for the Session program.
# Default is "/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
UserPath=/usr/bin:/bin:/usr/local/bin:/usr/X11R6/bin/
# The PATH for Setup, Startup and Reset, etc.
# Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin"
SystemPath=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
# The default system shell.
# Default is "/bin/sh"
#SystemShell=/bin/bash
# Where to put the user's X-server authorization file if ~/.Xauthority
# cannot be created.
# Default is "/tmp"
#UserAuthDir=
# Whether to automatically restart sessions after X-server crashes.
# Note that enabling this makes circumventing screen lockers other than
# KDE's built-in one possible!
# Default is false
AutoReLogin=false
# Allow root logins?
# Default is true
AllowRootLogin=false
# Allow to log in, when user has set an empty password?
# Default is true
AllowNullPasswd=true
# Who is allowed to shut down the system. This applies both to the
# greeter and to the command FiFo.
# "None" - no "Shutdown..." menu entry is shown at all
# "Root" - the root password must be entered to shut down
# "All" - everybody can shut down the machine
# Default is All
AllowShutdown=All
# Who is allowed to abort active sessions when shutting down.
# "None" - no forced shutdown is allowed at all
# "Root" - the root password must be entered to shut down forcibly
# "All" - everybody can shut down the machine forcibly
# Default is All
#AllowSdForceNow=Root
# The default choice for the shutdown condition/timing.
# "Schedule" - shut down after all active sessions exit (possibly at once)
# "TryNow" - shut down, if no active sessions are open; otherwise, do nothing
# "ForceNow" - shut down unconditionally
# Default is Schedule
#DefaultSdMode=ForceNow
# How to offer shutdown scheduling options:
# "Never" - not at all
# "Optional" - as a button in the simple shutdown dialogs
# "Always" - instead of the simple shutdown dialogs
# Default is Never
#ScheduledSd=Optional
# The directories containing session type definitions in .desktop format.
# Default is "/usr/share/apps/kdm/sessions"
#SessionsDirs=/etc/X11/sessions,/usr/share/xsessions
# The file (relative to $HOME) to redirect the session output to. This is
# a printf format string; one %s will be replaced with the display name.
# Default is ".xsession-errors"
ClientLogFile=.xsession-errors
# Whether KDM's built-in utmp/wtmp/lastlog registration should be used.
# Default is true
#UseSessReg=false

# Greeter config for all displays
[X-*-Greeter]
# Widget style of the greeter. "" means the built-in default which currently
# is "Plastik".
# Default is ""
GUIStyle=Oxygen
# Widget color scheme of the greeter. "" means the built-in default which
# currently is yellowish grey with some light blue and yellow elements.
# Default is ""
ColorScheme=Oxygen
# What should be shown in the greeter's logo are:
# "None" - nothing
# "Logo" - the image specified by LogoPixmap
# "Clock" - a neat analog clock
# Default is Clock
LogoArea=None
# The image to show when LogoArea=Logo.
# Default is ""
LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
# The relative coordinates (X,Y in percent) of the center of the greeter.
# Default is "50,50"
#GreeterPos=30,40
# The screen the greeter should be displayed on in multi-headed and Xinerama
# setups. The numbering starts with 0. For Xinerama, it corresponds to the
# listing order in the active ServerLayout section of XF86Config; -1 means
# to use the upper-left screen, -2 means to use the upper-right screen.
# Default is 0
#GreeterScreen=-1
# The headline in the greeter. The following character pairs are replaced:
# - %d -> current display
# - %h -> host name, possibly with domain name
# - %n -> node name, most probably the host name without domain name
# - %s -> the operating system
# - %r -> the operating system's version
# - %m -> the machine (hardware) type
# - %% -> a single %
# Default is "Welcome on %n"
GreetString=Welcome to %n
# Whether the fonts used in the greeter should be antialiased.
# Default is false
AntiAliasing=true
# The font for the greeter headline.
# Default is "Serif,20,bold"
GreetFont=Sans,24,-1,5,50,0,0,0,0,0
# The normal font used in the greeter.
# Default is "Sans Serif,10"
StdFont=Sans,12,-1,5,50,0,0,0,0,0
# The font used for the "Login Failed" message.
# Default is "Sans Serif,10,bold"
FailFont=Sans,12,-1,5,75,0,0,0,0,0
# What to do with the Num Lock modifier for the time the greeter is running:
# "Off" - turn off
# "On" - turn on
# "Keep" - do not change the state
# Default is Keep
#NumLock=Off
# Language and locale to use in the greeter, encoded like $LC_LANG.
# Default is "en_US"
# Language=en_US
# Enable autocompletion in the username line edit.
# Default is false
#UserCompletion=true
# Enable user list (names along with images) in the greeter.
# Default is true
#UserList=false
# User selection for UserCompletion and UserList:
# "NotHidden" - all users except those listed in HiddenUsers
# "Selected" - only the users listed in SelectedUsers
# Default is NotHidden
ShowUsers=NotHidden
# For ShowUsers=Selected. @<group> means all users in that group.
# Default is ""
SelectedUsers=
# For ShowUsers=NotHidden. @<group> means all users in that group.
# Default is ""
HiddenUsers=nobody,root
# Special case of HiddenUsers: users with a non-zero UID less than this number
# will not be shown as well.
# Default is 0
MinShowUID=500
# Complement to MinShowUID: users with a UID greater than this number will
# not be shown as well.
# Default is 65535
MaxShowUID=65000
# If false, the users are listed in the order they appear in /etc/passwd.
# If true, they are sorted alphabetically.
# Default is true
SortUsers=true
# Specify, where the users' pictures should be taken from.
# "AdminOnly" - from <FaceDir>/$USER.face[.icon]
# "PreferAdmin" - prefer <FaceDir>, fallback on $HOME
# "PreferUser" - ... and the other way round
# "UserOnly" - from the user's $HOME/.face[.icon]
# Default is AdminOnly
FaceSource=PreferUser
# The directory containing the user images if FaceSource is not UserOnly.
# Default is "/usr/share/apps/kdm/faces"
FaceDir=/usr/share/faces
# Specify, if/which user should be preselected for log in.
# "None" - do not preselect any user
# "Previous" - the user which successfully logged in last time
# "Default" - the user specified in the DefaultUser option
# Default is None
PreselectUser=None
# If this is true, the password input line is focused automatically if
# a user is preselected.
# Default is false
FocusPasswd=true
# The password input fields cloak the typed in text.
# If this is true, the entered password is echoed as bullets. Otherwise,
# no feedback is given at all.
EchoPasswd=true
# If true, krootimage will be automatically started by KDM; otherwise, the
# Setup script should be used to setup the background.
# Default is true
#UseBackground=false
# The configuration file to be used by krootimage.
# Default is "/usr/share/config/kdm/backgroundrc"
#BackgroundCfg=
# Hold the X-server grabbed the whole time the greeter is visible. This
# may be more secure, but it will disable any background and other
# X-clients started from the Setup script.
# Default is false
#GrabServer=true
# How many seconds to wait for grab to succeed.
# Default is 3
#GrabTimeout=3
# Warn, if display has no X-authorization (local auth cannot be created,
# XDMCP display wants no auth, or display is foreign from StaticServers).
# Default is true
#AuthComplain=false
# Random seed for forging saved session types, etc. of unknown users.
# This value should be random but constant across the login domain.
# Default is 0
ForgingSeed=1145020279
# Specify conversation plugins for the login dialog. Each plugin can be
# specified as a base name (which expands to $kde_modulesdir/kgreet_$base)
# or as a full pathname.
# Default is "classic"
#PluginsLogin=sign
# Same as PluginsLogin, but for the shutdown dialog.
# Default is "classic"
PluginsLogin=classic
#PluginsShutdown=modern
# A list of options of the form Key=Value. The conversation plugins can query
# these settings; it is up to them what possible keys are.
# Default is ""
#PluginOptions=SomeKey=randomvalue,Foo=bar
# Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs
# is configured).
# Default is true
#AllowConsole=false
# A program to run while the greeter is visible. It is supposed to preload
# as much as possible of the session that is going to be started (most
# probably).
# Default is ""
Preloader=/usr/bin/preloadkde
# Whether the greeter should be themed.
# Default is false
UseTheme=true
# The theme to use for the greeter. Can point to either a directory or an XML
# file.
# Default is ""
Theme=/usr/share/apps/kdm/themes/mageia-kde4

# Core config for local displays
[X-:*-Core]
# How often to try to run the X-server. Running includes executing it and
# waiting for it to come up.
# Default is 1
#ServerAttempts=1
# How long to wait for a local X-server to come up.
# Default is 15
ServerTimeout=120
# The command line to start the X-server, without display number and VT spec.
# This string is subject to word splitting.
# Default is "/usr/bin/X -br"
ServerCmd=/usr/bin/X
# Additional arguments for the X-servers for local sessions.
# This string is subject to word splitting. Default is ""
ServerArgsLocal=
# Additional arguments for the X-servers for remote sessions.
# This string is subject to word splitting.
# Default is ""
#ServerArgsRemote=
# Restart instead of resetting the local X-server after session exit.
# Use it if the server leaks memory etc.
# Default is false
TerminateServer=true
# The signal needed to reset the local X-server.
# Default is 1 (SIGHUP)
#ResetSignal=1
# The signal needed to terminate the local X-server.
# Default is 15 (SIGTERM)
#TermSignal=15
# Create X-authorizations for local displays.
# Default is true
#Authorize=false
# Which X-authorization mechanisms should be used.
# Default is "MIT-MAGIC-COOKIE-1"
#AuthNames=
# Need to reset the X-server to make it read initial Xauth file.
# Default is false
#ResetForAuth=true
# See above
AllowNullPasswd=
# See above
AllowShutdown=
# Enable password-less logins on this display. USE WITH EXTREME CARE!
# Default is false
NoPassEnable=false
# The users that do not need to provide a password to log in. NEVER list root!
# "*" means all non-root users. @<group> means all users in that group.
# Default is ""
NoPassUsers=
AllowShutdown=All

# Greeter config for local displays
[X-:*-Greeter]
# See above
PreselectUser=
# See above
FocusPasswd=
# Specify whether the greeter of local displays should start up in host chooser
# (remote) or login (local) mode and whether it is allowed to switch to the
# other mode.
# "LocalOnly" - only local login possible
# "DefaultLocal" - start up in local mode, but allow switching to remote mode
# "DefaultRemote" - ... and the other way round
# "RemoteOnly" - only choice of remote host possible
# Default is LocalOnly
LoginMode=DefaultLocal
# A list of hosts to be automatically added to the remote login menu. The
# special name "*" means broadcast.
# Default is "*"
#ChooserHosts=*,ugly,sky,dino,kiste.local,login.crap.com
# Show the "Restart X Server"/"Close Connection" action in the greeter.
# Default is true
#AllowClose=false

# Core config for 1st local display
[X-:0-Core]
# The VT the X-server should run on; auto-assign if zero, don't assign if -1.
# Better leave it zero and use ServerVTs.
# Default is 0
#ServerVT=7
# Enable automatic login. USE WITH EXTREME CARE!
# Default is false
AutoLoginEnable=false
# If true, auto-login after logout. If false, auto-login is performed only
# when a display session starts up.
# Default is false
#AutoLoginAgain=true
# The delay in seconds before automatic login kicks in.
# Default is 0
#AutoLoginDelay=10
# The user to log in automatically. NEVER specify root!
# Default is ""
AutoLoginUser=
# The password for the user to log in automatically. This is NOT required
# unless the user is logged into a NIS or Kerberos domain. If you use this
# option, you should "chmod 600 kdmrc" for obvious reasons.
# Default is ""
#AutoLoginPass=secret!
# Immediately lock the automatically started session. This works only with
# KDE sessions.
# Default is false
#AutoLoginLocked=true
# See above
ClientLogFile=

# Greeter config for 1st local display
[X-:0-Greeter]
# See above
#PreselectUser=Default
# The user to preselect if PreselectUser=Default.
# Default is ""

Actions: View

Attachments on bug 4097: 1396