Attachment 13462 Details for Bug 31006 – dmesg output

dmesg output

dmesg.txt (text/plain), 53.40 KB, created by Stephen Germany on 2022-10-29 14:19:33 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Stephen Germany

Created: 2022-10-29 14:19:33 CEST

Size: 53.40 KB

patch

obsolete

>x7f554fff]
>[    0.048223] PM: hibernation: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
>[    0.048228] [mem 0x80000000-0xdfffffff] available for PCI devices
>[    0.048230] Booting paravirtualized kernel on bare hardware
>[    0.048237] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.048251] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>[    0.048515] percpu: Embedded 32 pages/cpu s101652 r0 d29420 u131072
>[    0.048529] pcpu-alloc: s101652 r0 d29420 u131072 alloc=32*4096
>[    0.048536] pcpu-alloc: [0] 0 [0] 1 
>[    0.048577] Built 1 zonelists, mobility grouping on.  Total pages: 520110
>[    0.048582] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9 root=UUID=678ba0a3-c052-4f48-a7cb-75e98bf20359 ro noiswmd resume=UUID=de844a8e-a1f0-43e2-95c9-9e9123ad570a audit=0 vga=791
>[    0.048826] audit: disabled (until reboot)
>[    0.048881] Unknown kernel command line parameters "noiswmd BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9 vga=791", will be passed to user space.
>[    0.049197] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
>[    0.049323] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
>[    0.049387] microcode: microcode updated early to revision 0x44, date = 2010-10-04
>[    0.049396] mem auto-init: stack:off, heap alloc:off, heap free:off
>[    0.049405] Initializing HighMem for node 0 (000327fe:0007f672)
>[    0.180651] Initializing Movable for node 0 (00000000:00000000)
>[    0.186009] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.186027] Memory: 2032780K/2086904K available (10653K kernel code, 1417K rwdata, 4364K rodata, 964K init, 508K bss, 54124K reserved, 0K cma-reserved, 1259912K highmem)
>[    0.186499] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.186534] Kernel/User page tables isolation: enabled
>[    0.186554] ftrace: allocating 40677 entries in 80 pages
>[    0.198487] ftrace: allocated 80 pages with 2 groups
>[    0.198593] trace event string verifier disabled
>[    0.198685] Dynamic Preempt: voluntary
>[    0.198751] rcu: Preemptible hierarchical RCU implementation.
>[    0.198753] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
>[    0.198755]  Trampoline variant of Tasks RCU enabled.
>[    0.198756]  Rude variant of Tasks RCU enabled.
>[    0.198757]  Tracing variant of Tasks RCU enabled.
>[    0.198759] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
>[    0.198761] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>[    0.215489] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
>[    0.215723] rcu: srcu_init: Setting srcu_struct sizes based on contention.
>[    0.215836] Console: colour dummy device 80x25
>[    0.216377] printk: console [tty0] enabled
>[    0.216398] ACPI: Core revision 20220331
>[    0.216639] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.216669] APIC: Switch to symmetric I/O mode setup
>[    0.216677] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.217170] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.221668] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18ec13d7d10, max_idle_ns: 440795216840 ns
>[    0.221689] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.95 BogoMIPS (lpj=1728976)
>[    0.221701] pid_max: default: 32768 minimum: 301
>[    0.221835] LSM: Security Framework initializing
>[    0.221914] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
>[    0.221928] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
>[    0.222452] CPU0: Thermal monitoring enabled (TM1)
>[    0.222487] process: using mwait in idle threads
>[    0.222502] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.222509] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>[    0.222519] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>[    0.222528] Spectre V2 : Mitigation: Retpolines
>[    0.222533] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.222540] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>[    0.222546] Speculative Store Bypass: Vulnerable
>[    0.222555] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
>[    0.222560] MMIO Stale Data: Unknown: No mitigations
>[    0.336836] smpboot: CPU0: Intel(R) Celeron(R) CPU          530  @ 1.73GHz (family: 0x6, model: 0x16, stepping: 0x1)
>[    0.337150] cblist_init_generic: Setting adjustable number of callback queues.
>[    0.337161] cblist_init_generic: Setting shift to 1 and lim to 1.
>[    0.337200] cblist_init_generic: Setting shift to 1 and lim to 1.
>[    0.337239] cblist_init_generic: Setting shift to 1 and lim to 1.
>[    0.337289] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.
>[    0.337324] ... version:                2
>[    0.337328] ... bit width:              40
>[    0.337333] ... generic registers:      2
>[    0.337337] ... value mask:             000000ffffffffff
>[    0.337343] ... max period:             000000007fffffff
>[    0.337348] ... fixed-purpose events:   3
>[    0.337352] ... event mask:             0000000700000003
>[    0.337523] rcu: Hierarchical SRCU implementation.
>[    0.337530] rcu:     Max phase no-delay instances is 400.
>[    0.337959] smp: Bringing up secondary CPUs ...
>[    0.337966] smp: Brought up 1 node, 1 CPU
>[    0.337973] smpboot: Max logical packages: 2
>[    0.337977] smpboot: Total of 1 processors activated (3457.95 BogoMIPS)
>[    0.338765] devtmpfs: initialized
>[    0.339352] ACPI: PM: Registering ACPI NVS region [mem 0x7f672000-0x7f6befff] (315392 bytes)
>[    0.339474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.339489] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
>[    0.339589] pinctrl core: initialized pinctrl subsystem
>[    0.339803] PM: RTC time: 11:39:21, date: 2022-10-29
>[    0.340206] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>[    0.340742] thermal_sys: Registered thermal governor 'fair_share'
>[    0.340745] thermal_sys: Registered thermal governor 'bang_bang'
>[    0.340752] thermal_sys: Registered thermal governor 'step_wise'
>[    0.340757] thermal_sys: Registered thermal governor 'user_space'
>[    0.340770] cpuidle: using governor ladder
>[    0.340779] cpuidle: using governor menu
>[    0.340956] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.341170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.341186] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.341193] PCI: Using MMCONFIG for extended config space
>[    0.341203] PCI: Using configuration type 1 for base access
>[    0.344008] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>[    0.393581] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.393596] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
>[    0.410685] raid6: sse2x2   gen()  6370 MB/s
>[    0.427683] raid6: sse2x1   gen()  5103 MB/s
>[    0.444683] raid6: sse1x2   gen()  3323 MB/s
>[    0.461683] raid6: sse1x1   gen()  2620 MB/s
>[    0.461688] raid6: using algorithm sse2x2 gen() 6370 MB/s
>[    0.478684] raid6: .... xor() 3854 MB/s, rmw enabled
>[    0.478691] raid6: using ssse3x1 recovery algorithm
>[    0.488893] ACPI: Added _OSI(Module Device)
>[    0.488902] ACPI: Added _OSI(Processor Device)
>[    0.488907] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.488913] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.488919] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.488924] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.488930] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
>[    0.496084] ACPI: 4 ACPI AML tables successfully acquired and loaded
>[    0.497177] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.499000] ACPI: EC: EC started
>[    0.499008] ACPI: EC: interrupt blocked
>[    0.510763] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.510772] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
>[    0.510781] ACPI: Interpreter enabled
>[    0.510824] ACPI: PM: (supports S0 S3 S4 S5)
>[    0.510830] ACPI: Using IOAPIC for interrupt routing
>[    0.510884] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.510894] PCI: Using E820 reservations for host bridge windows
>[    0.511242] ACPI: Enabled 14 GPEs in block 00 to 1F
>[    0.548767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.548789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
>[    0.548805] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20220331/nsarguments-162)
>[    0.548901] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
>[    0.548912] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
>[    0.548921] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_TYPE)
>[    0.549804] PCI host bridge to bus 0000:00
>[    0.549814] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.549823] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.549830] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.549839] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
>[    0.549848] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.549882] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
>[    0.550029] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
>[    0.550052] pci 0000:00:02.0: reg 0x10: [mem 0x94000000-0x940fffff 64bit]
>[    0.550069] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    0.550083] pci 0000:00:02.0: reg 0x20: [io  0x5110-0x5117]
>[    0.550111] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.550264] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
>[    0.550287] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
>[    0.550464] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>[    0.550541] pci 0000:00:1a.0: reg 0x20: [io  0x50c0-0x50df]
>[    0.550715] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
>[    0.550792] pci 0000:00:1a.1: reg 0x20: [io  0x50a0-0x50bf]
>[    0.550977] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>[    0.551009] pci 0000:00:1a.7: reg 0x10: [mem 0x98304c00-0x98304fff]
>[    0.551134] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.551302] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>[    0.551341] pci 0000:00:1b.0: reg 0x10: [mem 0x98300000-0x98303fff 64bit]
>[    0.551486] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.551668] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>[    0.551836] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.552021] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>[    0.552182] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.552370] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
>[    0.552530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.552725] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
>[    0.552884] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.553058] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>[    0.553135] pci 0000:00:1d.0: reg 0x20: [io  0x5080-0x509f]
>[    0.553300] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>[    0.553377] pci 0000:00:1d.1: reg 0x20: [io  0x5060-0x507f]
>[    0.553552] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>[    0.553628] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
>[    0.553824] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>[    0.553857] pci 0000:00:1d.7: reg 0x10: [mem 0x98304800-0x98304bff]
>[    0.553981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.554136] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.554377] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
>[    0.554513] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
>[    0.554527] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
>[    0.554539] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
>[    0.554549] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
>[    0.554816] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
>[    0.554848] pci 0000:00:1f.1: reg 0x10: [io  0x5108-0x510f]
>[    0.554867] pci 0000:00:1f.1: reg 0x14: [io  0x5124-0x5127]
>[    0.554885] pci 0000:00:1f.1: reg 0x18: [io  0x5100-0x5107]
>[    0.554903] pci 0000:00:1f.1: reg 0x1c: [io  0x5120-0x5123]
>[    0.554920] pci 0000:00:1f.1: reg 0x20: [io  0x50e0-0x50ef]
>[    0.554955] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    0.554961] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    0.554968] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    0.554974] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    0.555122] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
>[    0.555154] pci 0000:00:1f.2: reg 0x10: [io  0x50f8-0x50ff]
>[    0.555173] pci 0000:00:1f.2: reg 0x14: [io  0x511c-0x511f]
>[    0.555191] pci 0000:00:1f.2: reg 0x18: [io  0x50f0-0x50f7]
>[    0.555208] pci 0000:00:1f.2: reg 0x1c: [io  0x5118-0x511b]
>[    0.555227] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
>[    0.555245] pci 0000:00:1f.2: reg 0x24: [mem 0x98304000-0x983047ff]
>[    0.555320] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.555475] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
>[    0.555507] pci 0000:00:1f.3: reg 0x10: [mem 0x98305000-0x983050ff]
>[    0.555559] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
>[    0.555776] acpiphp: Slot [1] registered
>[    0.555788] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.555799] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.555809] pci 0000:00:1c.0:   bridge window [mem 0x97300000-0x982fffff]
>[    0.555823] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
>[    0.555906] pci 0000:00:1c.1: PCI bridge to [bus 04]
>[    0.555917] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.555927] pci 0000:00:1c.1:   bridge window [mem 0x96300000-0x972fffff]
>[    0.555941] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
>[    0.556131] pci 0000:05:00.0: [14e4:1713] type 00 class 0x020000
>[    0.556220] pci 0000:05:00.0: reg 0x10: [mem 0x95200000-0x9520ffff 64bit]
>[    0.556407] pci 0000:05:00.0: enabling Extended Tags
>[    0.556690] pci 0000:05:00.0: PME# supported from D3hot D3cold
>[    0.557126] pci 0000:00:1c.2: PCI bridge to [bus 05]
>[    0.557137] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.557148] pci 0000:00:1c.2:   bridge window [mem 0x95200000-0x962fffff]
>[    0.557161] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
>[    0.557279] pci 0000:06:00.0: [168c:001c] type 00 class 0x020000
>[    0.557329] pci 0000:06:00.0: reg 0x10: [mem 0x94100000-0x9410ffff 64bit]
>[    0.557706] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.557730] pci 0000:00:1c.3: PCI bridge to [bus 06]
>[    0.557740] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
>[    0.557750] pci 0000:00:1c.3:   bridge window [mem 0x94100000-0x951fffff]
>[    0.557764] pci 0000:00:1c.3:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>[    0.557801] pci_bus 0000:07: extended config space not accessible
>[    0.557909] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
>[    0.557931] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.557939] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.557948] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.557957] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
>[    0.558008] pci_bus 0000:00: on NUMA node 0
>[    0.558235] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
>[    0.558346] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
>[    0.558453] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
>[    0.558560] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
>[    0.558666] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
>[    0.558673] ACPI: PCI: Interrupt link LNKE disabled
>[    0.558784] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
>[    0.558890] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
>[    0.558995] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
>[    0.587563] ACPI: EC: interrupt unblocked
>[    0.587574] ACPI: EC: event unblocked
>[    0.587584] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.587590] ACPI: EC: GPE=0x1c
>[    0.587595] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete
>[    0.587603] ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events
>[    0.587695] iommu: Default domain type: Translated 
>[    0.587702] iommu: DMA domain TLB invalidation policy: lazy mode 
>[    0.588109] SCSI subsystem initialized
>[    0.588212] libata version 3.00 loaded.
>[    0.588327] EDAC MC: Ver: 3.0.0
>[    0.588911] NetLabel: Initializing
>[    0.588919] NetLabel:  domain hash size = 128
>[    0.588924] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.588950] NetLabel:  unlabeled traffic allowed by default
>[    0.588956] mctp: management component transport protocol core
>[    0.588961] NET: Registered PF_MCTP protocol family
>[    0.588971] PCI: Using ACPI for IRQ routing
>[    0.601233] PCI: pci_cache_line_size set to 64 bytes
>[    0.601399] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.601403] e820: reserve RAM buffer [mem 0x7f4fd000-0x7fffffff]
>[    0.601407] e820: reserve RAM buffer [mem 0x7f552000-0x7fffffff]
>[    0.601410] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
>[    0.601413] e820: reserve RAM buffer [mem 0x7f672000-0x7fffffff]
>[    0.601489] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.601498] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.601504] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.601516] vgaarb: loaded
>[    0.601760] hpet: 3 channels of 0 reserved for per-cpu timers
>[    0.601772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.601784] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.603721] clocksource: Switched to clocksource tsc-early
>[    0.622788] VFS: Disk quotas dquot_6.6.0
>[    0.622837] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.622957] pnp: PnP ACPI init
>[    0.623380] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
>[    0.623481] system 00:00: [io  0x0600-0x060f] has been reserved
>[    0.623491] system 00:00: [io  0x0610] has been reserved
>[    0.623508] system 00:00: [io  0x0800-0x080f] has been reserved
>[    0.623516] system 00:00: [io  0x0810-0x0817] has been reserved
>[    0.623537] system 00:00: [io  0x0400-0x047f] has been reserved
>[    0.623544] system 00:00: [io  0x0500-0x053f] has been reserved
>[    0.623551] system 00:00: [io  0xff2c-0xff2f] has been reserved
>[    0.623562] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.623571] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.623579] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.623587] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.623595] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.623603] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.623611] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.623618] system 00:00: [mem 0x32000000-0x320000ff] could not be reserved
>[    0.646751] pnp: PnP ACPI: found 4 devices
>[    0.646764] PnPBIOS: Disabled by ACPI PNP
>[    0.684269] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.684440] NET: Registered PF_INET protocol family
>[    0.684593] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
>[    0.685393] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
>[    0.685409] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
>[    0.685428] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
>[    0.685452] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
>[    0.685490] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.685626] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
>[    0.685645] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
>[    0.685759] NET: Registered PF_UNIX/PF_LOCAL protocol family
>[    0.685777] NET: Registered PF_XDP protocol family
>[    0.685816] pci 0000:00:02.1: BAR 0: assigned [mem 0x98400000-0x984fffff 64bit]
>[    0.685837] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.685845] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.685857] pci 0000:00:1c.0:   bridge window [mem 0x97300000-0x982fffff]
>[    0.685868] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
>[    0.685882] pci 0000:00:1c.1: PCI bridge to [bus 04]
>[    0.685890] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>[    0.685901] pci 0000:00:1c.1:   bridge window [mem 0x96300000-0x972fffff]
>[    0.685911] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
>[    0.685927] pci 0000:00:1c.2: PCI bridge to [bus 05]
>[    0.685934] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
>[    0.685946] pci 0000:00:1c.2:   bridge window [mem 0x95200000-0x962fffff]
>[    0.685955] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
>[    0.685971] pci 0000:00:1c.3: PCI bridge to [bus 06]
>[    0.685978] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
>[    0.685990] pci 0000:00:1c.3:   bridge window [mem 0x94100000-0x951fffff]
>[    0.685999] pci 0000:00:1c.3:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
>[    0.686015] pci 0000:00:1e.0: PCI bridge to [bus 07]
>[    0.686036] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.686043] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.686051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.686058] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
>[    0.686065] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
>[    0.686072] pci_bus 0000:02: resource 1 [mem 0x97300000-0x982fffff]
>[    0.686079] pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
>[    0.686087] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>[    0.686093] pci_bus 0000:04: resource 1 [mem 0x96300000-0x972fffff]
>[    0.686100] pci_bus 0000:04: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
>[    0.686109] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
>[    0.686115] pci_bus 0000:05: resource 1 [mem 0x95200000-0x962fffff]
>[    0.686122] pci_bus 0000:05: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
>[    0.686130] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
>[    0.686136] pci_bus 0000:06: resource 1 [mem 0x94100000-0x951fffff]
>[    0.686143] pci_bus 0000:06: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
>[    0.686152] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
>[    0.686158] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
>[    0.686165] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.686172] pci_bus 0000:07: resource 7 [mem 0x80000000-0xfebfffff window]
>[    0.689127] PCI: CLS 0 bytes, default 64
>[    0.689222] Trying to unpack rootfs image as initramfs...
>[    0.693867] sta2x11_mfd_init
>[    0.694117] apm: BIOS not found.
>[    0.694672] Initialise system trusted keyrings
>[    0.697552] workingset: timestamp_bits=30 max_order=19 bucket_order=0
>[    0.704840] zbud: loaded
>[    0.752551] xor: measuring software checksum speed
>[    0.753892]    pIII_sse        :  7532 MB/sec
>[    0.755031]    prefetch64-sse  :  8722 MB/sec
>[    0.755037] xor: using function: prefetch64-sse (8722 MB/sec)
>[    0.757898] Key type asymmetric registered
>[    0.757911] Asymmetric key parser 'x509' registered
>[    0.758019] bounce: pool size: 64 pages
>[    0.758101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>[    0.760597] io scheduler mq-deadline registered
>[    0.760608] io scheduler kyber registered
>[    0.760696] io scheduler bfq registered
>[    0.768715] Monitor-Mwait will be used to enter C-1 state
>[    0.768727] Monitor-Mwait will be used to enter C-2 state
>[    0.768733] Monitor-Mwait will be used to enter C-3 state
>[    0.768737] ACPI: \_PR_.CPU0: Found 3 idle states
>[    0.769205] isapnp: Scanning for PnP cards...
>[    1.471712] isapnp: No Plug & Play device found
>[    1.518107] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.522655] Linux agpgart interface v0.103
>[    1.530677] brd: module loaded
>[    1.536858] ahci 0000:00:1f.2: version 3.0
>[    1.537270] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>[    1.537290] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
>[    1.550843] scsi host0: ahci
>[    1.551160] scsi host1: ahci
>[    1.554914] scsi host2: ahci
>[    1.555035] ata1: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304100 irq 24
>[    1.555047] ata2: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304180 irq 24
>[    1.555056] ata3: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304200 irq 24
>[    1.555335] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>[    1.606614] Freeing initrd memory: 17868K
>[    1.611340] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.611364] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.611670] mousedev: PS/2 mouse device common for all mice
>[    1.613448] rtc_cmos 00:01: RTC can wake from S4
>[    1.613841] rtc_cmos 00:01: registered as rtc0
>[    1.613894] rtc_cmos 00:01: setting system clock to 2022-10-29T11:39:23 UTC (1667043563)
>[    1.613932] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.614012] intel_pstate: CPU model not supported
>[    1.614030] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.614096] vesafb: mode is 1024x768x16, linelength=2048, pages=3
>[    1.614105] vesafb: scrolling: redraw
>[    1.614109] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>[    1.614148] vesafb: framebuffer at 0x80000000, mapped to 0x(ptrval), using 3072k, total 7616k
>[    1.632412] Console: switching to colour frame buffer device 128x48
>[    1.650709] fb0: VESA VGA frame buffer device
>[    1.651257] Key type dns_resolver registered
>[    1.651740] microcode: sig=0x10661, pf=0x80, revision=0x44
>[    1.651942] microcode: Microcode Update Driver: v2.2.
>[    1.651949] IPI shorthand broadcast: enabled
>[    1.652306] sched_clock: Marking stable (1650760506, 926774)->(1698974522, -47287242)
>[    1.652786] registered taskstats version 1
>[    1.652942] Loading compiled-in X.509 certificates
>[    1.653271] zswap: loaded using pool lzo/zbud
>[    1.653630] Key type ._fscrypt registered
>[    1.653793] Key type .fscrypt registered
>[    1.653931] Key type fscrypt-provisioning registered
>[    1.654897] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
>[    1.660409] Key type encrypted registered
>[    1.662341] PM:   Magic number: 10:503:682
>[    1.662717] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>[    1.663950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.720698] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec13d7d10, max_idle_ns: 440795216840 ns
>[    1.721062] clocksource: Switched to clocksource tsc
>[    1.869885] ata2: SATA link down (SStatus 0 SControl 300)
>[    1.870116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.870822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
>[    1.871136] ata1.00: ATA-8: TOSHIBA MK3276GSX -63, GS101X, max UDMA/100
>[    1.879151] ata3: SATA link down (SStatus 0 SControl 300)
>[    1.887076] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    1.895521] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
>[    1.895633] ata1.00: configured for UDMA/100
>[    1.911648] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3276GS 1X   PQ: 0 ANSI: 5
>[    1.920007] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[    1.928119] sd 0:0:0:0: [sda] Write Protect is off
>[    1.936018] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.936054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.944186] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[    2.013461]  sda: sda1 sda2 < sda5 sda6 >
>[    2.021831] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.034126] Freeing unused kernel image (initmem) memory: 964K
>[    2.042469] Write protecting kernel text and read-only data: 15020k
>[    2.050748] NX-protecting the kernel data: 7776k
>[    2.060063] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.068311] x86/mm: Checking user space page tables
>[    2.076803] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.084960] Run /init as init process
>[    2.093037]   with arguments:
>[    2.093040]     /init
>[    2.093042]     noiswmd
>[    2.093044]   with environment:
>[    2.093046]     HOME=/
>[    2.093048]     TERM=linux
>[    2.093050]     BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9
>[    2.093052]     vga=791
>[    2.190959] dracut: Mageia-9
>[    2.224701] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
>[    2.233158] clocksource:                       'hpet' wd_nsec: 44898493866 wd_now: 54882490 wd_last: 2e36ce70 mask: ffffffff
>[    2.241772] clocksource:                       'tsc' cs_nsec: 496007748 cs_now: 8d9edd8d7 cs_last: 8a6d02166 mask: ffffffffffffffff
>[    2.258803] clocksource:                       'tsc' is current clocksource.
>[    2.267368] tsc: Marking TSC unstable due to clocksource watchdog
>[    2.275943] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
>[    2.284720] sched_clock: Marking unstable (2275016075, 926774)<-(2323230247, -47287242)
>[    2.296760] clocksource: Not enough CPUs to check clocksource 'tsc'.
>[    2.306718] clocksource: Switched to clocksource hpet
>[    2.704978] ACPI: bus type drm_connector registered
>[    2.735115] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found
>[    3.117899] ACPI: battery: Slot [BAT0] (battery present)
>[    3.823042] pci 0000:00:00.0: Intel 965GM Chipset
>[    3.832076] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>[    3.841412] pci 0000:00:00.0: detected 8192K stolen memory
>[    3.851361] Console: switching to colour dummy device 80x25
>[    3.852616] i915 0000:00:02.0: vgaarb: deactivate vga console
>[    3.875407] i915 0000:00:02.0: [drm] Initialized overlay support.
>[    3.877376] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
>[    3.878245] ACPI: video: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
>[    4.097379] acpi device:3b: registered as cooling_device1
>[    4.099063] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2
>[    4.297666] fbcon: i915drmfb (fb0) is primary device
>[    5.034408] Console: switching to colour frame buffer device 160x50
>[    5.052906] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
>[    5.076858] dracut: Starting plymouth daemon
>[    6.189193] ata_piix 0000:00:1f.1: version 2.13
>[    6.207772] scsi host3: ata_piix
>[    6.215811] scsi host4: ata_piix
>[    6.215962] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
>[    6.216003] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
>[    6.382885] ata4.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
>[    6.389087] scsi 3:0:0:0: CD-ROM            Optiarc  CD-RW CRX880A    KX07 PQ: 0 ANSI: 5
>[    6.480360] ACPI: bus type USB registered
>[    6.481788] usbcore: registered new interface driver usbfs
>[    6.482621] usbcore: registered new interface driver hub
>[    6.483220] usbcore: registered new device driver usb
>[    6.559554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    6.575745] ehci-pci: EHCI PCI platform driver
>[    6.576119] ehci-pci 0000:00:1a.7: EHCI Host Controller
>[    6.580501] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    6.580608] ehci-pci 0000:00:1a.7: debug port 1
>[    6.616441] ehci-pci 0000:00:1a.7: irq 18, io mem 0x98304c00
>[    6.622897] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    6.623060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
>[    6.623123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.623174] usb usb1: Product: EHCI Host Controller
>[    6.623199] usb usb1: Manufacturer: Linux 6.0.5-desktop-1.mga9 ehci_hcd
>[    6.623231] usb usb1: SerialNumber: 0000:00:1a.7
>[    6.630991] hub 1-0:1.0: USB hub found
>[    6.642740] hub 1-0:1.0: 4 ports detected
>[    6.660505] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    6.665713] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    6.671864] ehci-pci 0000:00:1d.7: debug port 1
>[    6.674948] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>[    6.676843] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    6.695383] ehci-pci 0000:00:1d.7: irq 23, io mem 0x98304800
>[    6.700965] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[    6.722722] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    6.724825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
>[    6.726695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.728572] usb usb2: Product: EHCI Host Controller
>[    6.730427] usb usb2: Manufacturer: Linux 6.0.5-desktop-1.mga9 ehci_hcd
>[    6.732305] usb usb2: SerialNumber: 0000:00:1d.7
>[    6.735870] hub 2-0:1.0: USB hub found
>[    6.739554] hub 2-0:1.0: 6 ports detected
>[    6.792341] random: crng init done
>[    6.802884] uhci_hcd: USB Universal Host Controller Interface driver
>[    6.803659] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    6.803677] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    6.804732] uhci_hcd 0000:00:1a.0: detected 2 ports
>[    6.804767] uhci_hcd 0000:00:1a.0: irq 16, io port 0x000050c0
>[    6.805921] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    6.805929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.805932] usb usb3: Product: UHCI Host Controller
>[    6.805935] usb usb3: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
>[    6.805937] usb usb3: SerialNumber: 0000:00:1a.0
>[    6.806500] hub 3-0:1.0: USB hub found
>[    6.806514] hub 3-0:1.0: 2 ports detected
>[    6.808141] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    6.808153] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    6.808165] uhci_hcd 0000:00:1a.1: detected 2 ports
>[    6.808208] uhci_hcd 0000:00:1a.1: irq 21, io port 0x000050a0
>[    6.808845] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    6.808851] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.808854] usb usb4: Product: UHCI Host Controller
>[    6.808857] usb usb4: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
>[    6.808859] usb usb4: SerialNumber: 0000:00:1a.1
>[    6.811287] hub 4-0:1.0: USB hub found
>[    6.811725] hub 4-0:1.0: 2 ports detected
>[    6.822664] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    6.822680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>[    6.823083] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    6.823117] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00005080
>[    6.823212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    6.823217] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.823220] usb usb5: Product: UHCI Host Controller
>[    6.823222] usb usb5: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
>[    6.823224] usb usb5: SerialNumber: 0000:00:1d.0
>[    6.827176] hub 5-0:1.0: USB hub found
>[    6.828983] hub 5-0:1.0: 2 ports detected
>[    6.829984] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    6.829996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>[    6.830007] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    6.830054] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00005060
>[    6.833635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    6.833642] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.833645] usb usb6: Product: UHCI Host Controller
>[    6.833647] usb usb6: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
>[    6.833649] usb usb6: SerialNumber: 0000:00:1d.1
>[    6.834217] hub 6-0:1.0: USB hub found
>[    6.834232] hub 6-0:1.0: 2 ports detected
>[    6.837297] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    6.837310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>[    6.837323] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    6.837351] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00005040
>[    6.837439] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    6.837443] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    6.837446] usb usb7: Product: UHCI Host Controller
>[    6.837448] usb usb7: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
>[    6.837450] usb usb7: SerialNumber: 0000:00:1d.2
>[    6.837979] hub 7-0:1.0: USB hub found
>[    6.837993] hub 7-0:1.0: 2 ports detected
>[    6.978708] usb 2-3: new high-speed USB device number 2 using ehci-pci
>[    7.082561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
>[    7.108372] usb 2-3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
>[    7.110050] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    7.111719] usb 2-3: Product: USB 2.0 Hub
>[    7.115968] hub 2-3:1.0: USB hub found
>[    7.118621] hub 2-3:1.0: 4 ports detected
>[    7.170634] EXT4-fs (sda1): unmounting filesystem.
>[    7.190226] dracut: Checking ext4: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
>[    7.192244] dracut: issuing e2fsck -a /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
>[    7.285278] dracut: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359: clean, 247363/3301376 files, 2479298/13183084 blocks
>[    7.290640] dracut: Mounting /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359 with -o rw,noatime,ro
>[    7.415949] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
>[    7.496717] usb 2-3.1: new high-speed USB device number 3 using ehci-pci
>[    7.703497] usb 2-3.1: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00
>[    7.705305] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    7.707120] usb 2-3.1: Product: Portable Super Multi Drive
>[    7.708988] usb 2-3.1: Manufacturer: Hitachi-LG Data Storage Inc
>[    7.710831] usb 2-3.1: SerialNumber: M05L9B82334         
>[    7.730027] usb-storage 2-3.1:1.0: USB Mass Storage device detected
>[    7.732884] scsi host5: usb-storage 2-3.1:1.0
>[    7.736214] usbcore: registered new interface driver usb-storage
>[    7.834452] dracut: Mounted root filesystem /dev/sda1
>[    7.896717] usb 2-3.2: new full-speed USB device number 4 using ehci-pci
>[    8.097748] usb 2-3.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
>[    8.099659] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.101601] usb 2-3.2: Product: USB Receiver
>[    8.103562] usb 2-3.2: Manufacturer: Logitech
>[    8.135230] hid: raw HID events driver (C) Jiri Kosina
>[    8.177070] usbcore: registered new interface driver usbhid
>[    8.178988] usbhid: USB HID core driver
>[    8.233880] dracut: Switching root
>[    8.764269] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GP63EX70  RF01 PQ: 0 ANSI: 0
>[    8.775883] sr 5:0:0:0: [sr1] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    8.783991] sr 5:0:0:0: Attached scsi CD-ROM sr1
>[    9.430868] systemd[1]: Inserted module 'autofs4'
>[    9.563318] NET: Registered PF_INET6 protocol family
>[    9.565882] Segment Routing with IPv6
>[    9.567828] In-situ OAM (IOAM) with IPv6
>[    9.731038] systemd[1]: systemd 251 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
>[    9.737567] systemd[1]: Detected architecture x86.
>[    9.816894] systemd[1]: Hostname set to <localhost.localdomain>.
>[   11.958141] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   11.962996] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network-auth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   11.968019] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/resolvconf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   11.973204] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network-up' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   11.989126] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/msec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   13.669475] systemd[1]: Queued start job for default target Graphical Interface.
>[   13.674478] systemd[1]: Created slice Slice /system/getty.
>[   13.681310] systemd[1]: Created slice Slice /system/modprobe.
>[   13.688130] systemd[1]: Created slice Slice /system/systemd-fsck.
>[   13.694452] systemd[1]: Created slice User and Session Slice.
>[   13.700314] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[   13.706744] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   13.713013] systemd[1]: Reached target Login Prompts.
>[   13.719191] systemd[1]: Reached target Local Integrity Protected Volumes.
>[   13.725499] systemd[1]: Reached target Remote File Systems.
>[   13.731458] systemd[1]: Reached target RPC Port Mapper.
>[   13.737426] systemd[1]: Reached target Slice Units.
>[   13.743448] systemd[1]: Reached target Local Verity Protected Volumes.
>[   13.749824] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[   13.776894] systemd[1]: Listening on Process Core Dump Socket.
>[   13.783257] systemd[1]: Listening on initctl Compatibility Named Pipe.
>[   13.817738] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
>[   13.821099] systemd[1]: Listening on Journal Socket (/dev/log).
>[   13.827433] systemd[1]: Listening on Journal Socket.
>[   13.845103] systemd[1]: Listening on udev Control Socket.
>[   13.851518] systemd[1]: Listening on udev Kernel Socket.
>[   13.859252] systemd[1]: Mounting Huge Pages File System...
>[   13.867917] systemd[1]: Mounting POSIX Message Queue File System...
>[   13.876827] systemd[1]: Mounting Kernel Debug File System...
>[   13.884972] systemd[1]: Mounting Kernel Trace File System...
>[   13.900249] systemd[1]: Starting Create List of Static Device Nodes...
>[   13.909837] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[   13.918431] systemd[1]: Starting Software RAID Monitor Takeover...
>[   13.926777] systemd[1]: Starting Load Kernel Module configfs...
>[   13.937650] systemd[1]: Starting Load Kernel Module drm...
>[   13.948548] systemd[1]: Starting Load Kernel Module fuse...
>[   13.960102] systemd[1]: Starting File System Check on Root Device...
>[   13.969466] systemd[1]: Starting Journal Service...
>[   14.011850] fuse: init (API version 7.36)
>[   14.128474] systemd[1]: Starting Load Kernel Modules...
>[   14.134259] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
>[   14.139097] systemd[1]: Starting Coldplug All udev Devices...
>[   14.149153] systemd[1]: Mounted Huge Pages File System.
>[   14.159667] systemd[1]: Mounted POSIX Message Queue File System.
>[   14.168573] systemd[1]: Mounted Kernel Debug File System.
>[   14.179646] systemd[1]: Mounted Kernel Trace File System.
>[   14.194609] systemd[1]: Finished Create List of Static Device Nodes.
>[   14.209549] systemd[1]: Started Software RAID Monitor Takeover.
>[   14.216258] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>[   14.221781] systemd[1]: Finished Load Kernel Module configfs.
>[   14.228641] systemd[1]: modprobe@drm.service: Deactivated successfully.
>[   14.234105] systemd[1]: Finished Load Kernel Module drm.
>[   14.242667] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>[   14.248771] systemd[1]: Finished Load Kernel Module fuse.
>[   14.266911] systemd[1]: Mounting FUSE Control File System...
>[   14.283112] systemd[1]: Mounting Kernel Configuration File System...
>[   14.300657] systemd[1]: Mounted FUSE Control File System.
>[   14.309598] systemd[1]: Mounted Kernel Configuration File System.
>[   14.480166] systemd[1]: Started Journal Service.
>[   14.532740] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   14.537817] sr 3:0:0:0: Attached scsi generic sg1 type 5
>[   14.541791] sr 5:0:0:0: Attached scsi generic sg2 type 5
>[   14.857346] EXT4-fs (sda1): re-mounted. Quota mode: none.
>[   14.996350] systemd-journald[516]: Received client request to flush runtime journal.
>[   18.109206] ACPI: AC: AC Adapter [AC] (on-line)
>[   18.199887] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3
>[   18.206614] ACPI: button: Power Button [PWRB]
>[   18.226377] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0D:00/input/input4
>[   18.248273] ACPI: button: Lid Switch [LID0]
>[   18.264140] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input5
>[   18.288412] ACPI: button: Sleep Button [SLPB]
>[   18.302721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
>[   18.325882] ACPI: button: Power Button [PWRF]
>[   18.377765] thermal LNXTHERM:00: registered as thermal_zone0
>[   18.379748] ACPI: thermal: Thermal Zone [TZ01] (45 C)
>[   18.749728] pps_core: LinuxPPS API ver. 1 registered
>[   18.751655] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[   18.756327] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20220331/utaddress-204)
>[   18.760530] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>[   18.783109] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[   18.801797] i2c i2c-6: 2/2 memory slots populated (from DMI)
>[   18.809096] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20220331/utaddress-204)
>[   18.813533] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>[   18.816545] PTP clock support registered
>[   18.821309] i2c i2c-6: Successfully instantiated SPD at 0x50
>[   18.896714] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20220331/utaddress-204)
>[   18.901545] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>[   18.903946] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   18.937084] acer_wmi: Acer Laptop ACPI-WMI Extras
>[   18.969775] acer_wmi: Function bitmap for Communication Device: 0x1
>[   19.051467] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.0/0003:046D:C534.0001/input/input8
>[   19.109465] intel_powerclamp: No package C-state available
>[   19.122079] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input0
>[   19.130403] Adding 4191344k swap on /dev/sda5.  Priority:-2 extents:1 across:4191344k FS
>[   19.193760] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input9
>[   19.267146] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input10
>[   19.373122] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input11
>[   19.377848] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input1
>[   19.444259] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:62:98:4d
>[   19.447170] tg3 0000:05:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
>[   19.450045] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[   19.452969] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[   19.506875] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input0
>[   19.584316] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input1
>[   19.608427] iTCO_vendor_support: vendor-support=0
>[   19.633985] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
>[   19.656598] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=1)
>[   19.670624] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
>[   19.676814] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14
>[   19.685925] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1d.7-3.2/input1:2
>[   20.118131] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
>[   20.121360] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   20.124539] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[   20.127615] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   20.130662] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   20.138597] tg3 0000:05:00.0 enp5s0: renamed from eth0
>[   20.151529] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
>[   20.159731] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[   20.281736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
>[   20.285841] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
>[   20.411794] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[   20.454916] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[   20.465310] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
>[   20.496846] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input20
>[   20.501510] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1d.7-3.2/input1:2
>[   21.208123] ath5k 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   21.211222] ath5k 0000:06:00.0: registered as 'phy0'
>[   21.732784] ath: EEPROM regdomain: 0x65
>[   21.732793] ath: EEPROM indicates we should expect a direct regpair map
>[   21.732796] ath: Country alpha2 being used: 00
>[   21.732798] ath: Regpair used: 0x65
>[   21.732833] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   21.735317] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>[   21.762334] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
>[   22.371891] device-mapper: uevent: version 1.0.3
>[   22.376669] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
>[   23.469919] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none.
>[   34.667266] tg3 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex
>[   34.668794] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
>[   34.670319] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
>[   34.778719] NET: Registered PF_PACKET protocol family
>[   34.834063] IPv4: martian source 255.255.255.255 from 192.168.1.79, on dev enp5s0
>[   34.835039] ll header: 00000000: ff ff ff ff ff ff 70 89 76 63 40 3a 08 00
>[   35.866974] IPv4: martian source 255.255.255.255 from 192.168.1.77, on dev enp5s0
>[   35.868645] ll header: 00000000: ff ff ff ff ff ff 7c f6 66 f5 b7 f7 08 00
>[   36.303773] IPv4: martian source 255.255.255.255 from 192.168.1.84, on dev enp5s0
>[   36.304754] ll header: 00000000: ff ff ff ff ff ff 70 89 76 5f 30 76 08 00
>[   36.336954] IPv4: martian source 255.255.255.255 from 192.168.1.81, on dev enp5s0
>[   36.337939] ll header: 00000000: ff ff ff ff ff ff 70 89 76 63 4a 9e 08 00
>[   61.235043] netfilter PSD loaded - (c) astaro AG
>[   61.255092] IFWLOG: register target
>[  591.012566] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected.
>[germ@localhost ~]$

x7f554fff]
[    0.048223] PM: hibernation: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
[    0.048228] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.048230] Booting paravirtualized kernel on bare hardware
[    0.048237] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.048251] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.048515] percpu: Embedded 32 pages/cpu s101652 r0 d29420 u131072
[    0.048529] pcpu-alloc: s101652 r0 d29420 u131072 alloc=32*4096
[    0.048536] pcpu-alloc: [0] 0 [0] 1 
[    0.048577] Built 1 zonelists, mobility grouping on.  Total pages: 520110
[    0.048582] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9 root=UUID=678ba0a3-c052-4f48-a7cb-75e98bf20359 ro noiswmd resume=UUID=de844a8e-a1f0-43e2-95c9-9e9123ad570a audit=0 vga=791
[    0.048826] audit: disabled (until reboot)
[    0.048881] Unknown kernel command line parameters "noiswmd BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9 vga=791", will be passed to user space.
[    0.049197] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.049323] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.049387] microcode: microcode updated early to revision 0x44, date = 2010-10-04
[    0.049396] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.049405] Initializing HighMem for node 0 (000327fe:0007f672)
[    0.180651] Initializing Movable for node 0 (00000000:00000000)
[    0.186009] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.186027] Memory: 2032780K/2086904K available (10653K kernel code, 1417K rwdata, 4364K rodata, 964K init, 508K bss, 54124K reserved, 0K cma-reserved, 1259912K highmem)
[    0.186499] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.186534] Kernel/User page tables isolation: enabled
[    0.186554] ftrace: allocating 40677 entries in 80 pages
[    0.198487] ftrace: allocated 80 pages with 2 groups
[    0.198593] trace event string verifier disabled
[    0.198685] Dynamic Preempt: voluntary
[    0.198751] rcu: Preemptible hierarchical RCU implementation.
[    0.198753] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.198755]  Trampoline variant of Tasks RCU enabled.
[    0.198756]  Rude variant of Tasks RCU enabled.
[    0.198757]  Tracing variant of Tasks RCU enabled.
[    0.198759] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.198761] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.215489] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[    0.215723] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.215836] Console: colour dummy device 80x25
[    0.216377] printk: console [tty0] enabled
[    0.216398] ACPI: Core revision 20220331
[    0.216639] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.216669] APIC: Switch to symmetric I/O mode setup
[    0.216677] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.217170] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.221668] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18ec13d7d10, max_idle_ns: 440795216840 ns
[    0.221689] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.95 BogoMIPS (lpj=1728976)
[    0.221701] pid_max: default: 32768 minimum: 301
[    0.221835] LSM: Security Framework initializing
[    0.221914] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.221928] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.222452] CPU0: Thermal monitoring enabled (TM1)
[    0.222487] process: using mwait in idle threads
[    0.222502] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.222509] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.222519] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.222528] Spectre V2 : Mitigation: Retpolines
[    0.222533] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.222540] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.222546] Speculative Store Bypass: Vulnerable
[    0.222555] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.222560] MMIO Stale Data: Unknown: No mitigations
[    0.336836] smpboot: CPU0: Intel(R) Celeron(R) CPU          530  @ 1.73GHz (family: 0x6, model: 0x16, stepping: 0x1)
[    0.337150] cblist_init_generic: Setting adjustable number of callback queues.
[    0.337161] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.337200] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.337239] cblist_init_generic: Setting shift to 1 and lim to 1.
[    0.337289] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.337324] ... version:                2
[    0.337328] ... bit width:              40
[    0.337333] ... generic registers:      2
[    0.337337] ... value mask:             000000ffffffffff
[    0.337343] ... max period:             000000007fffffff
[    0.337348] ... fixed-purpose events:   3
[    0.337352] ... event mask:             0000000700000003
[    0.337523] rcu: Hierarchical SRCU implementation.
[    0.337530] rcu:     Max phase no-delay instances is 400.
[    0.337959] smp: Bringing up secondary CPUs ...
[    0.337966] smp: Brought up 1 node, 1 CPU
[    0.337973] smpboot: Max logical packages: 2
[    0.337977] smpboot: Total of 1 processors activated (3457.95 BogoMIPS)
[    0.338765] devtmpfs: initialized
[    0.339352] ACPI: PM: Registering ACPI NVS region [mem 0x7f672000-0x7f6befff] (315392 bytes)
[    0.339474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.339489] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.339589] pinctrl core: initialized pinctrl subsystem
[    0.339803] PM: RTC time: 11:39:21, date: 2022-10-29
[    0.340206] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.340742] thermal_sys: Registered thermal governor 'fair_share'
[    0.340745] thermal_sys: Registered thermal governor 'bang_bang'
[    0.340752] thermal_sys: Registered thermal governor 'step_wise'
[    0.340757] thermal_sys: Registered thermal governor 'user_space'
[    0.340770] cpuidle: using governor ladder
[    0.340779] cpuidle: using governor menu
[    0.340956] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.341170] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.341186] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.341193] PCI: Using MMCONFIG for extended config space
[    0.341203] PCI: Using configuration type 1 for base access
[    0.344008] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.393581] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.393596] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.410685] raid6: sse2x2   gen()  6370 MB/s
[    0.427683] raid6: sse2x1   gen()  5103 MB/s
[    0.444683] raid6: sse1x2   gen()  3323 MB/s
[    0.461683] raid6: sse1x1   gen()  2620 MB/s
[    0.461688] raid6: using algorithm sse2x2 gen() 6370 MB/s
[    0.478684] raid6: .... xor() 3854 MB/s, rmw enabled
[    0.478691] raid6: using ssse3x1 recovery algorithm
[    0.488893] ACPI: Added _OSI(Module Device)
[    0.488902] ACPI: Added _OSI(Processor Device)
[    0.488907] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.488913] ACPI: Added _OSI(Processor Aggregator Device)
[    0.488919] ACPI: Added _OSI(Linux-Dell-Video)
[    0.488924] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.488930] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.496084] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.497177] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.499000] ACPI: EC: EC started
[    0.499008] ACPI: EC: interrupt blocked
[    0.510763] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.510772] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
[    0.510781] ACPI: Interpreter enabled
[    0.510824] ACPI: PM: (supports S0 S3 S4 S5)
[    0.510830] ACPI: Using IOAPIC for interrupt routing
[    0.510884] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.510894] PCI: Using E820 reservations for host bridge windows
[    0.511242] ACPI: Enabled 14 GPEs in block 00 to 1F
[    0.548767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.548789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.548805] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20220331/nsarguments-162)
[    0.548901] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
[    0.548912] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
[    0.548921] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_TYPE)
[    0.549804] PCI host bridge to bus 0000:00
[    0.549814] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.549823] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.549830] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.549839] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.549848] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.549882] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.550029] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    0.550052] pci 0000:00:02.0: reg 0x10: [mem 0x94000000-0x940fffff 64bit]
[    0.550069] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.550083] pci 0000:00:02.0: reg 0x20: [io  0x5110-0x5117]
[    0.550111] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.550264] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    0.550287] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    0.550464] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.550541] pci 0000:00:1a.0: reg 0x20: [io  0x50c0-0x50df]
[    0.550715] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.550792] pci 0000:00:1a.1: reg 0x20: [io  0x50a0-0x50bf]
[    0.550977] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.551009] pci 0000:00:1a.7: reg 0x10: [mem 0x98304c00-0x98304fff]
[    0.551134] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.551302] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.551341] pci 0000:00:1b.0: reg 0x10: [mem 0x98300000-0x98303fff 64bit]
[    0.551486] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.551668] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.551836] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.552021] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.552182] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.552370] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    0.552530] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.552725] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[    0.552884] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.553058] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.553135] pci 0000:00:1d.0: reg 0x20: [io  0x5080-0x509f]
[    0.553300] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.553377] pci 0000:00:1d.1: reg 0x20: [io  0x5060-0x507f]
[    0.553552] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.553628] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.553824] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.553857] pci 0000:00:1d.7: reg 0x10: [mem 0x98304800-0x98304bff]
[    0.553981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.554136] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.554377] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.554513] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.554527] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.554539] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.554549] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.554816] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.554848] pci 0000:00:1f.1: reg 0x10: [io  0x5108-0x510f]
[    0.554867] pci 0000:00:1f.1: reg 0x14: [io  0x5124-0x5127]
[    0.554885] pci 0000:00:1f.1: reg 0x18: [io  0x5100-0x5107]
[    0.554903] pci 0000:00:1f.1: reg 0x1c: [io  0x5120-0x5123]
[    0.554920] pci 0000:00:1f.1: reg 0x20: [io  0x50e0-0x50ef]
[    0.554955] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.554961] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.554968] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.554974] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.555122] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.555154] pci 0000:00:1f.2: reg 0x10: [io  0x50f8-0x50ff]
[    0.555173] pci 0000:00:1f.2: reg 0x14: [io  0x511c-0x511f]
[    0.555191] pci 0000:00:1f.2: reg 0x18: [io  0x50f0-0x50f7]
[    0.555208] pci 0000:00:1f.2: reg 0x1c: [io  0x5118-0x511b]
[    0.555227] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.555245] pci 0000:00:1f.2: reg 0x24: [mem 0x98304000-0x983047ff]
[    0.555320] pci 0000:00:1f.2: PME# supported from D3hot
[    0.555475] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.555507] pci 0000:00:1f.3: reg 0x10: [mem 0x98305000-0x983050ff]
[    0.555559] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.555776] acpiphp: Slot [1] registered
[    0.555788] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.555799] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.555809] pci 0000:00:1c.0:   bridge window [mem 0x97300000-0x982fffff]
[    0.555823] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.555906] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.555917] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.555927] pci 0000:00:1c.1:   bridge window [mem 0x96300000-0x972fffff]
[    0.555941] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.556131] pci 0000:05:00.0: [14e4:1713] type 00 class 0x020000
[    0.556220] pci 0000:05:00.0: reg 0x10: [mem 0x95200000-0x9520ffff 64bit]
[    0.556407] pci 0000:05:00.0: enabling Extended Tags
[    0.556690] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.557126] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.557137] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.557148] pci 0000:00:1c.2:   bridge window [mem 0x95200000-0x962fffff]
[    0.557161] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    0.557279] pci 0000:06:00.0: [168c:001c] type 00 class 0x020000
[    0.557329] pci 0000:06:00.0: reg 0x10: [mem 0x94100000-0x9410ffff 64bit]
[    0.557706] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.557730] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.557740] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.557750] pci 0000:00:1c.3:   bridge window [mem 0x94100000-0x951fffff]
[    0.557764] pci 0000:00:1c.3:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
[    0.557801] pci_bus 0000:07: extended config space not accessible
[    0.557909] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.557931] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.557939] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.557948] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.557957] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.558008] pci_bus 0000:00: on NUMA node 0
[    0.558235] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.558346] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[    0.558453] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.558560] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.558666] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.558673] ACPI: PCI: Interrupt link LNKE disabled
[    0.558784] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.558890] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.558995] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.587563] ACPI: EC: interrupt unblocked
[    0.587574] ACPI: EC: event unblocked
[    0.587584] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.587590] ACPI: EC: GPE=0x1c
[    0.587595] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete
[    0.587603] ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events
[    0.587695] iommu: Default domain type: Translated 
[    0.587702] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.588109] SCSI subsystem initialized
[    0.588212] libata version 3.00 loaded.
[    0.588327] EDAC MC: Ver: 3.0.0
[    0.588911] NetLabel: Initializing
[    0.588919] NetLabel:  domain hash size = 128
[    0.588924] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.588950] NetLabel:  unlabeled traffic allowed by default
[    0.588956] mctp: management component transport protocol core
[    0.588961] NET: Registered PF_MCTP protocol family
[    0.588971] PCI: Using ACPI for IRQ routing
[    0.601233] PCI: pci_cache_line_size set to 64 bytes
[    0.601399] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.601403] e820: reserve RAM buffer [mem 0x7f4fd000-0x7fffffff]
[    0.601407] e820: reserve RAM buffer [mem 0x7f552000-0x7fffffff]
[    0.601410] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[    0.601413] e820: reserve RAM buffer [mem 0x7f672000-0x7fffffff]
[    0.601489] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.601498] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.601504] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.601516] vgaarb: loaded
[    0.601760] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.601772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.601784] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.603721] clocksource: Switched to clocksource tsc-early
[    0.622788] VFS: Disk quotas dquot_6.6.0
[    0.622837] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.622957] pnp: PnP ACPI init
[    0.623380] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.623481] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.623491] system 00:00: [io  0x0610] has been reserved
[    0.623508] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.623516] system 00:00: [io  0x0810-0x0817] has been reserved
[    0.623537] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.623544] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.623551] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.623562] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.623571] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.623579] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.623587] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.623595] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.623603] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.623611] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.623618] system 00:00: [mem 0x32000000-0x320000ff] could not be reserved
[    0.646751] pnp: PnP ACPI: found 4 devices
[    0.646764] PnPBIOS: Disabled by ACPI PNP
[    0.684269] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.684440] NET: Registered PF_INET protocol family
[    0.684593] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.685393] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.685409] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.685428] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.685452] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.685490] TCP: Hash tables configured (established 8192 bind 8192)
[    0.685626] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.685645] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.685759] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.685777] NET: Registered PF_XDP protocol family
[    0.685816] pci 0000:00:02.1: BAR 0: assigned [mem 0x98400000-0x984fffff 64bit]
[    0.685837] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.685845] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.685857] pci 0000:00:1c.0:   bridge window [mem 0x97300000-0x982fffff]
[    0.685868] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.685882] pci 0000:00:1c.1: PCI bridge to [bus 04]
[    0.685890] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.685901] pci 0000:00:1c.1:   bridge window [mem 0x96300000-0x972fffff]
[    0.685911] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.685927] pci 0000:00:1c.2: PCI bridge to [bus 05]
[    0.685934] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.685946] pci 0000:00:1c.2:   bridge window [mem 0x95200000-0x962fffff]
[    0.685955] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    0.685971] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.685978] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.685990] pci 0000:00:1c.3:   bridge window [mem 0x94100000-0x951fffff]
[    0.685999] pci 0000:00:1c.3:   bridge window [mem 0x93000000-0x93ffffff 64bit pref]
[    0.686015] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.686036] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.686043] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.686051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.686058] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.686065] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.686072] pci_bus 0000:02: resource 1 [mem 0x97300000-0x982fffff]
[    0.686079] pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.686087] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.686093] pci_bus 0000:04: resource 1 [mem 0x96300000-0x972fffff]
[    0.686100] pci_bus 0000:04: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[    0.686109] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.686115] pci_bus 0000:05: resource 1 [mem 0x95200000-0x962fffff]
[    0.686122] pci_bus 0000:05: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
[    0.686130] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
[    0.686136] pci_bus 0000:06: resource 1 [mem 0x94100000-0x951fffff]
[    0.686143] pci_bus 0000:06: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
[    0.686152] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.686158] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.686165] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.686172] pci_bus 0000:07: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.689127] PCI: CLS 0 bytes, default 64
[    0.689222] Trying to unpack rootfs image as initramfs...
[    0.693867] sta2x11_mfd_init
[    0.694117] apm: BIOS not found.
[    0.694672] Initialise system trusted keyrings
[    0.697552] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[    0.704840] zbud: loaded
[    0.752551] xor: measuring software checksum speed
[    0.753892]    pIII_sse        :  7532 MB/sec
[    0.755031]    prefetch64-sse  :  8722 MB/sec
[    0.755037] xor: using function: prefetch64-sse (8722 MB/sec)
[    0.757898] Key type asymmetric registered
[    0.757911] Asymmetric key parser 'x509' registered
[    0.758019] bounce: pool size: 64 pages
[    0.758101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.760597] io scheduler mq-deadline registered
[    0.760608] io scheduler kyber registered
[    0.760696] io scheduler bfq registered
[    0.768715] Monitor-Mwait will be used to enter C-1 state
[    0.768727] Monitor-Mwait will be used to enter C-2 state
[    0.768733] Monitor-Mwait will be used to enter C-3 state
[    0.768737] ACPI: \_PR_.CPU0: Found 3 idle states
[    0.769205] isapnp: Scanning for PnP cards...
[    1.471712] isapnp: No Plug & Play device found
[    1.518107] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.522655] Linux agpgart interface v0.103
[    1.530677] brd: module loaded
[    1.536858] ahci 0000:00:1f.2: version 3.0
[    1.537270] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    1.537290] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.550843] scsi host0: ahci
[    1.551160] scsi host1: ahci
[    1.554914] scsi host2: ahci
[    1.555035] ata1: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304100 irq 24
[    1.555047] ata2: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304180 irq 24
[    1.555056] ata3: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304200 irq 24
[    1.555335] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.606614] Freeing initrd memory: 17868K
[    1.611340] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.611364] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.611670] mousedev: PS/2 mouse device common for all mice
[    1.613448] rtc_cmos 00:01: RTC can wake from S4
[    1.613841] rtc_cmos 00:01: registered as rtc0
[    1.613894] rtc_cmos 00:01: setting system clock to 2022-10-29T11:39:23 UTC (1667043563)
[    1.613932] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.614012] intel_pstate: CPU model not supported
[    1.614030] ledtrig-cpu: registered to indicate activity on CPUs
[    1.614096] vesafb: mode is 1024x768x16, linelength=2048, pages=3
[    1.614105] vesafb: scrolling: redraw
[    1.614109] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.614148] vesafb: framebuffer at 0x80000000, mapped to 0x(ptrval), using 3072k, total 7616k
[    1.632412] Console: switching to colour frame buffer device 128x48
[    1.650709] fb0: VESA VGA frame buffer device
[    1.651257] Key type dns_resolver registered
[    1.651740] microcode: sig=0x10661, pf=0x80, revision=0x44
[    1.651942] microcode: Microcode Update Driver: v2.2.
[    1.651949] IPI shorthand broadcast: enabled
[    1.652306] sched_clock: Marking stable (1650760506, 926774)->(1698974522, -47287242)
[    1.652786] registered taskstats version 1
[    1.652942] Loading compiled-in X.509 certificates
[    1.653271] zswap: loaded using pool lzo/zbud
[    1.653630] Key type ._fscrypt registered
[    1.653793] Key type .fscrypt registered
[    1.653931] Key type fscrypt-provisioning registered
[    1.654897] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    1.660409] Key type encrypted registered
[    1.662341] PM:   Magic number: 10:503:682
[    1.662717] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.663950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.720698] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec13d7d10, max_idle_ns: 440795216840 ns
[    1.721062] clocksource: Switched to clocksource tsc
[    1.869885] ata2: SATA link down (SStatus 0 SControl 300)
[    1.870116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.870822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out
[    1.871136] ata1.00: ATA-8: TOSHIBA MK3276GSX -63, GS101X, max UDMA/100
[    1.879151] ata3: SATA link down (SStatus 0 SControl 300)
[    1.887076] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.895521] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.895633] ata1.00: configured for UDMA/100
[    1.911648] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3276GS 1X   PQ: 0 ANSI: 5
[    1.920007] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.928119] sd 0:0:0:0: [sda] Write Protect is off
[    1.936018] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.936054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.944186] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    2.013461]  sda: sda1 sda2 < sda5 sda6 >
[    2.021831] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.034126] Freeing unused kernel image (initmem) memory: 964K
[    2.042469] Write protecting kernel text and read-only data: 15020k
[    2.050748] NX-protecting the kernel data: 7776k
[    2.060063] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.068311] x86/mm: Checking user space page tables
[    2.076803] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.084960] Run /init as init process
[    2.093037]   with arguments:
[    2.093040]     /init
[    2.093042]     noiswmd
[    2.093044]   with environment:
[    2.093046]     HOME=/
[    2.093048]     TERM=linux
[    2.093050]     BOOT_IMAGE=/boot/vmlinuz-6.0.5-desktop-1.mga9
[    2.093052]     vga=791
[    2.190959] dracut: Mageia-9
[    2.224701] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
[    2.233158] clocksource:                       'hpet' wd_nsec: 44898493866 wd_now: 54882490 wd_last: 2e36ce70 mask: ffffffff
[    2.241772] clocksource:                       'tsc' cs_nsec: 496007748 cs_now: 8d9edd8d7 cs_last: 8a6d02166 mask: ffffffffffffffff
[    2.258803] clocksource:                       'tsc' is current clocksource.
[    2.267368] tsc: Marking TSC unstable due to clocksource watchdog
[    2.275943] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[    2.284720] sched_clock: Marking unstable (2275016075, 926774)<-(2323230247, -47287242)
[    2.296760] clocksource: Not enough CPUs to check clocksource 'tsc'.
[    2.306718] clocksource: Switched to clocksource hpet
[    2.704978] ACPI: bus type drm_connector registered
[    2.735115] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found
[    3.117899] ACPI: battery: Slot [BAT0] (battery present)
[    3.823042] pci 0000:00:00.0: Intel 965GM Chipset
[    3.832076] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.841412] pci 0000:00:00.0: detected 8192K stolen memory
[    3.851361] Console: switching to colour dummy device 80x25
[    3.852616] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.875407] i915 0000:00:02.0: [drm] Initialized overlay support.
[    3.877376] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.878245] ACPI: video: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    4.097379] acpi device:3b: registered as cooling_device1
[    4.099063] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2
[    4.297666] fbcon: i915drmfb (fb0) is primary device
[    5.034408] Console: switching to colour frame buffer device 160x50
[    5.052906] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    5.076858] dracut: Starting plymouth daemon
[    6.189193] ata_piix 0000:00:1f.1: version 2.13
[    6.207772] scsi host3: ata_piix
[    6.215811] scsi host4: ata_piix
[    6.215962] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
[    6.216003] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
[    6.382885] ata4.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[    6.389087] scsi 3:0:0:0: CD-ROM            Optiarc  CD-RW CRX880A    KX07 PQ: 0 ANSI: 5
[    6.480360] ACPI: bus type USB registered
[    6.481788] usbcore: registered new interface driver usbfs
[    6.482621] usbcore: registered new interface driver hub
[    6.483220] usbcore: registered new device driver usb
[    6.559554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.575745] ehci-pci: EHCI PCI platform driver
[    6.576119] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    6.580501] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    6.580608] ehci-pci 0000:00:1a.7: debug port 1
[    6.616441] ehci-pci 0000:00:1a.7: irq 18, io mem 0x98304c00
[    6.622897] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    6.623060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    6.623123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.623174] usb usb1: Product: EHCI Host Controller
[    6.623199] usb usb1: Manufacturer: Linux 6.0.5-desktop-1.mga9 ehci_hcd
[    6.623231] usb usb1: SerialNumber: 0000:00:1a.7
[    6.630991] hub 1-0:1.0: USB hub found
[    6.642740] hub 1-0:1.0: 4 ports detected
[    6.660505] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    6.665713] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    6.671864] ehci-pci 0000:00:1d.7: debug port 1
[    6.674948] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    6.676843] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.695383] ehci-pci 0000:00:1d.7: irq 23, io mem 0x98304800
[    6.700965] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    6.722722] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    6.724825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    6.726695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.728572] usb usb2: Product: EHCI Host Controller
[    6.730427] usb usb2: Manufacturer: Linux 6.0.5-desktop-1.mga9 ehci_hcd
[    6.732305] usb usb2: SerialNumber: 0000:00:1d.7
[    6.735870] hub 2-0:1.0: USB hub found
[    6.739554] hub 2-0:1.0: 6 ports detected
[    6.792341] random: crng init done
[    6.802884] uhci_hcd: USB Universal Host Controller Interface driver
[    6.803659] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.803677] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.804732] uhci_hcd 0000:00:1a.0: detected 2 ports
[    6.804767] uhci_hcd 0000:00:1a.0: irq 16, io port 0x000050c0
[    6.805921] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    6.805929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.805932] usb usb3: Product: UHCI Host Controller
[    6.805935] usb usb3: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
[    6.805937] usb usb3: SerialNumber: 0000:00:1a.0
[    6.806500] hub 3-0:1.0: USB hub found
[    6.806514] hub 3-0:1.0: 2 ports detected
[    6.808141] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    6.808153] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    6.808165] uhci_hcd 0000:00:1a.1: detected 2 ports
[    6.808208] uhci_hcd 0000:00:1a.1: irq 21, io port 0x000050a0
[    6.808845] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    6.808851] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.808854] usb usb4: Product: UHCI Host Controller
[    6.808857] usb usb4: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
[    6.808859] usb usb4: SerialNumber: 0000:00:1a.1
[    6.811287] hub 4-0:1.0: USB hub found
[    6.811725] hub 4-0:1.0: 2 ports detected
[    6.822664] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    6.822680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    6.823083] uhci_hcd 0000:00:1d.0: detected 2 ports
[    6.823117] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00005080
[    6.823212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    6.823217] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.823220] usb usb5: Product: UHCI Host Controller
[    6.823222] usb usb5: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
[    6.823224] usb usb5: SerialNumber: 0000:00:1d.0
[    6.827176] hub 5-0:1.0: USB hub found
[    6.828983] hub 5-0:1.0: 2 ports detected
[    6.829984] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    6.829996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    6.830007] uhci_hcd 0000:00:1d.1: detected 2 ports
[    6.830054] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00005060
[    6.833635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    6.833642] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.833645] usb usb6: Product: UHCI Host Controller
[    6.833647] usb usb6: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
[    6.833649] usb usb6: SerialNumber: 0000:00:1d.1
[    6.834217] hub 6-0:1.0: USB hub found
[    6.834232] hub 6-0:1.0: 2 ports detected
[    6.837297] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    6.837310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    6.837323] uhci_hcd 0000:00:1d.2: detected 2 ports
[    6.837351] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00005040
[    6.837439] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    6.837443] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.837446] usb usb7: Product: UHCI Host Controller
[    6.837448] usb usb7: Manufacturer: Linux 6.0.5-desktop-1.mga9 uhci_hcd
[    6.837450] usb usb7: SerialNumber: 0000:00:1d.2
[    6.837979] hub 7-0:1.0: USB hub found
[    6.837993] hub 7-0:1.0: 2 ports detected
[    6.978708] usb 2-3: new high-speed USB device number 2 using ehci-pci
[    7.082561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[    7.108372] usb 2-3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    7.110050] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.111719] usb 2-3: Product: USB 2.0 Hub
[    7.115968] hub 2-3:1.0: USB hub found
[    7.118621] hub 2-3:1.0: 4 ports detected
[    7.170634] EXT4-fs (sda1): unmounting filesystem.
[    7.190226] dracut: Checking ext4: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
[    7.192244] dracut: issuing e2fsck -a /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
[    7.285278] dracut: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359: clean, 247363/3301376 files, 2479298/13183084 blocks
[    7.290640] dracut: Mounting /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359 with -o rw,noatime,ro
[    7.415949] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[    7.496717] usb 2-3.1: new high-speed USB device number 3 using ehci-pci
[    7.703497] usb 2-3.1: New USB device found, idVendor=0e8d, idProduct=1887, bcdDevice= 0.00
[    7.705305] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.707120] usb 2-3.1: Product: Portable Super Multi Drive
[    7.708988] usb 2-3.1: Manufacturer: Hitachi-LG Data Storage Inc
[    7.710831] usb 2-3.1: SerialNumber: M05L9B82334         
[    7.730027] usb-storage 2-3.1:1.0: USB Mass Storage device detected
[    7.732884] scsi host5: usb-storage 2-3.1:1.0
[    7.736214] usbcore: registered new interface driver usb-storage
[    7.834452] dracut: Mounted root filesystem /dev/sda1
[    7.896717] usb 2-3.2: new full-speed USB device number 4 using ehci-pci
[    8.097748] usb 2-3.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    8.099659] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.101601] usb 2-3.2: Product: USB Receiver
[    8.103562] usb 2-3.2: Manufacturer: Logitech
[    8.135230] hid: raw HID events driver (C) Jiri Kosina
[    8.177070] usbcore: registered new interface driver usbhid
[    8.178988] usbhid: USB HID core driver
[    8.233880] dracut: Switching root
[    8.764269] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GP63EX70  RF01 PQ: 0 ANSI: 0
[    8.775883] sr 5:0:0:0: [sr1] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.783991] sr 5:0:0:0: Attached scsi CD-ROM sr1
[    9.430868] systemd[1]: Inserted module 'autofs4'
[    9.563318] NET: Registered PF_INET6 protocol family
[    9.565882] Segment Routing with IPv6
[    9.567828] In-situ OAM (IOAM) with IPv6
[    9.731038] systemd[1]: systemd 251 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    9.737567] systemd[1]: Detected architecture x86.
[    9.816894] systemd[1]: Hostname set to <localhost.localdomain>.
[   11.958141] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[   11.962996] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network-auth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[   11.968019] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/resolvconf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[   11.973204] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/network-up' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[   11.989126] systemd-sysv-generator[502]: SysV service '/etc/rc.d/init.d/msec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[   13.669475] systemd[1]: Queued start job for default target Graphical Interface.
[   13.674478] systemd[1]: Created slice Slice /system/getty.
[   13.681310] systemd[1]: Created slice Slice /system/modprobe.
[   13.688130] systemd[1]: Created slice Slice /system/systemd-fsck.
[   13.694452] systemd[1]: Created slice User and Session Slice.
[   13.700314] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.706744] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.713013] systemd[1]: Reached target Login Prompts.
[   13.719191] systemd[1]: Reached target Local Integrity Protected Volumes.
[   13.725499] systemd[1]: Reached target Remote File Systems.
[   13.731458] systemd[1]: Reached target RPC Port Mapper.
[   13.737426] systemd[1]: Reached target Slice Units.
[   13.743448] systemd[1]: Reached target Local Verity Protected Volumes.
[   13.749824] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   13.776894] systemd[1]: Listening on Process Core Dump Socket.
[   13.783257] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   13.817738] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[   13.821099] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.827433] systemd[1]: Listening on Journal Socket.
[   13.845103] systemd[1]: Listening on udev Control Socket.
[   13.851518] systemd[1]: Listening on udev Kernel Socket.
[   13.859252] systemd[1]: Mounting Huge Pages File System...
[   13.867917] systemd[1]: Mounting POSIX Message Queue File System...
[   13.876827] systemd[1]: Mounting Kernel Debug File System...
[   13.884972] systemd[1]: Mounting Kernel Trace File System...
[   13.900249] systemd[1]: Starting Create List of Static Device Nodes...
[   13.909837] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   13.918431] systemd[1]: Starting Software RAID Monitor Takeover...
[   13.926777] systemd[1]: Starting Load Kernel Module configfs...
[   13.937650] systemd[1]: Starting Load Kernel Module drm...
[   13.948548] systemd[1]: Starting Load Kernel Module fuse...
[   13.960102] systemd[1]: Starting File System Check on Root Device...
[   13.969466] systemd[1]: Starting Journal Service...
[   14.011850] fuse: init (API version 7.36)
[   14.128474] systemd[1]: Starting Load Kernel Modules...
[   14.134259] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[   14.139097] systemd[1]: Starting Coldplug All udev Devices...
[   14.149153] systemd[1]: Mounted Huge Pages File System.
[   14.159667] systemd[1]: Mounted POSIX Message Queue File System.
[   14.168573] systemd[1]: Mounted Kernel Debug File System.
[   14.179646] systemd[1]: Mounted Kernel Trace File System.
[   14.194609] systemd[1]: Finished Create List of Static Device Nodes.
[   14.209549] systemd[1]: Started Software RAID Monitor Takeover.
[   14.216258] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   14.221781] systemd[1]: Finished Load Kernel Module configfs.
[   14.228641] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   14.234105] systemd[1]: Finished Load Kernel Module drm.
[   14.242667] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   14.248771] systemd[1]: Finished Load Kernel Module fuse.
[   14.266911] systemd[1]: Mounting FUSE Control File System...
[   14.283112] systemd[1]: Mounting Kernel Configuration File System...
[   14.300657] systemd[1]: Mounted FUSE Control File System.
[   14.309598] systemd[1]: Mounted Kernel Configuration File System.
[   14.480166] systemd[1]: Started Journal Service.
[   14.532740] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.537817] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   14.541791] sr 5:0:0:0: Attached scsi generic sg2 type 5
[   14.857346] EXT4-fs (sda1): re-mounted. Quota mode: none.
[   14.996350] systemd-journald[516]: Received client request to flush runtime journal.
[   18.109206] ACPI: AC: AC Adapter [AC] (on-line)
[   18.199887] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3
[   18.206614] ACPI: button: Power Button [PWRB]
[   18.226377] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0D:00/input/input4
[   18.248273] ACPI: button: Lid Switch [LID0]
[   18.264140] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input5
[   18.288412] ACPI: button: Sleep Button [SLPB]
[   18.302721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   18.325882] ACPI: button: Power Button [PWRF]
[   18.377765] thermal LNXTHERM:00: registered as thermal_zone0
[   18.379748] ACPI: thermal: Thermal Zone [TZ01] (45 C)
[   18.749728] pps_core: LinuxPPS API ver. 1 registered
[   18.751655] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   18.756327] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20220331/utaddress-204)
[   18.760530] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   18.783109] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   18.801797] i2c i2c-6: 2/2 memory slots populated (from DMI)
[   18.809096] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20220331/utaddress-204)
[   18.813533] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   18.816545] PTP clock support registered
[   18.821309] i2c i2c-6: Successfully instantiated SPD at 0x50
[   18.896714] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20220331/utaddress-204)
[   18.901545] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[   18.903946] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.937084] acer_wmi: Acer Laptop ACPI-WMI Extras
[   18.969775] acer_wmi: Function bitmap for Communication Device: 0x1
[   19.051467] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.0/0003:046D:C534.0001/input/input8
[   19.109465] intel_powerclamp: No package C-state available
[   19.122079] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input0
[   19.130403] Adding 4191344k swap on /dev/sda5.  Priority:-2 extents:1 across:4191344k FS
[   19.193760] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input9
[   19.267146] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input10
[   19.373122] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/input/input11
[   19.377848] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input1
[   19.444259] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:62:98:4d
[   19.447170] tg3 0000:05:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[   19.450045] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   19.452969] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   19.506875] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input0
[   19.584316] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.2/input1
[   19.608427] iTCO_vendor_support: vendor-support=0
[   19.633985] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[   19.656598] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=1)
[   19.670624] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[   19.676814] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14
[   19.685925] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1d.7-3.2/input1:2
[   20.118131] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[   20.121360] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.124539] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   20.127615] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   20.130662] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   20.138597] tg3 0000:05:00.0 enp5s0: renamed from eth0
[   20.151529] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   20.159731] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   20.281736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   20.285841] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   20.411794] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   20.454916] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   20.465310] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[   20.496846] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/2-3.2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input20
[   20.501510] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1d.7-3.2/input1:2
[   21.208123] ath5k 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[   21.211222] ath5k 0000:06:00.0: registered as 'phy0'
[   21.732784] ath: EEPROM regdomain: 0x65
[   21.732793] ath: EEPROM indicates we should expect a direct regpair map
[   21.732796] ath: Country alpha2 being used: 00
[   21.732798] ath: Regpair used: 0x65
[   21.732833] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   21.735317] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   21.762334] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
[   22.371891] device-mapper: uevent: version 1.0.3
[   22.376669] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   23.469919] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none.
[   34.667266] tg3 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex
[   34.668794] tg3 0000:05:00.0 enp5s0: Flow control is on for TX and on for RX
[   34.670319] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   34.778719] NET: Registered PF_PACKET protocol family
[   34.834063] IPv4: martian source 255.255.255.255 from 192.168.1.79, on dev enp5s0
[   34.835039] ll header: 00000000: ff ff ff ff ff ff 70 89 76 63 40 3a 08 00
[   35.866974] IPv4: martian source 255.255.255.255 from 192.168.1.77, on dev enp5s0
[   35.868645] ll header: 00000000: ff ff ff ff ff ff 7c f6 66 f5 b7 f7 08 00
[   36.303773] IPv4: martian source 255.255.255.255 from 192.168.1.84, on dev enp5s0
[   36.304754] ll header: 00000000: ff ff ff ff ff ff 70 89 76 5f 30 76 08 00
[   36.336954] IPv4: martian source 255.255.255.255 from 192.168.1.81, on dev enp5s0
[   36.337939] ll header: 00000000: ff ff ff ff ff ff 70 89 76 63 4a 9e 08 00
[   61.235043] netfilter PSD loaded - (c) astaro AG
[   61.255092] IFWLOG: register target
[  591.012566] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected.
[germ@localhost ~]$

Actions: View

Attachments on bug 31006: 13462 | 13463 | 13464