Attachment 13453 Details for Bug 31032 – dmesg output

dmesg output

dmesg.txt (text/plain), 65.26 KB, created by Edward on 2022-10-27 14:27:48 CEST

(hide)

Description:

Filename:

MIME Type:

Creator: Edward

Created: 2022-10-27 14:27:48 CEST

Size: 65.26 KB

patch

obsolete

>[    0.000000] Linux version 6.0.3-desktop-2.mga9 (iurt@ecosse.mageia.org) (gcc (Mageia 12.2.1-0.20221022.1.mga9) 12.2.1 20221022, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT_DYNAMIC Sun Oct 23 17:24:08 UTC 2022
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 root=UUID=898dd7ee-751f-4d3e-a04f-b80ba4a17d60 ro splash quiet noiswmd resume=UUID=78574d11-31e8-43b1-9006-f80aa4810085 audit=0 vga=791
>[    0.000000] x86/fpu: x87 FPU will use FXSAVE
>[    0.000000] signal: max sigframe size: 1440
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.5 present.
>[    0.000000] DMI: Compaq-Presario NP185AAR-ABA CQ5110F/NARRA5, BIOS  5.49 08/06/2009
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2511.232 MHz processor
>[    0.003689] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.003693] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.009640] AGP: No AGP bridge found
>[    0.009699] last_pfn = 0x120000 max_arch_pfn = 0x400000000
>[    0.010239] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.010362] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
>[    0.010376] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
>[    0.012982] found SMP MP-table at [mem 0x000f53c0-0x000f53cf]
>[    0.013010] Using GB pages for direct mapping
>[    0.013435] RAMDISK: [mem 0x33a62000-0x35d28fff]
>[    0.013446] ACPI: Early table checksum verification disabled
>[    0.013452] ACPI: RSDP 0x00000000000F7500 000024 (v02 HPQOEM)
>[    0.013457] ACPI: XSDT 0x00000000DFEE3100 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
>[    0.013465] ACPI: FACP 0x00000000DFEE7E80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
>[    0.013472] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20220331/tbfadt-564)
>[    0.013477] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20220331/tbfadt-564)
>[    0.013480] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20220331/tbfadt-564)
>[    0.013483] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20220331/tbfadt-564)
>[    0.013486] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20220331/tbfadt-564)
>[    0.013490] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20220331/tbfadt-669)
>[    0.013493] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20220331/tbfadt-669)
>[    0.013496] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20220331/tbfadt-669)
>[    0.013500] ACPI: DSDT 0x00000000DFEE32C0 004B61 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
>[    0.013505] ACPI: FACS 0x00000000DFEE0000 000040
>[    0.013508] ACPI: FACS 0x00000000DFEE0000 000040
>[    0.013512] ACPI: SLIC 0x00000000DFEE80C0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
>[    0.013516] ACPI: SSDT 0x00000000DFEE8280 0007BA (v01 HPQOEM SLIC-CPC 00000001  LTP 00000001)
>[    0.013520] ACPI: HPET 0x00000000DFEE8A80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
>[    0.013524] ACPI: MCFG 0x00000000DFEE8B00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
>[    0.013528] ACPI: APIC 0x00000000DFEE7FC0 000098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
>[    0.013532] ACPI: Reserving FACP table memory at [mem 0xdfee7e80-0xdfee7f73]
>[    0.013534] ACPI: Reserving DSDT table memory at [mem 0xdfee32c0-0xdfee7e20]
>[    0.013536] ACPI: Reserving FACS table memory at [mem 0xdfee0000-0xdfee003f]
>[    0.013537] ACPI: Reserving FACS table memory at [mem 0xdfee0000-0xdfee003f]
>[    0.013539] ACPI: Reserving SLIC table memory at [mem 0xdfee80c0-0xdfee8235]
>[    0.013540] ACPI: Reserving SSDT table memory at [mem 0xdfee8280-0xdfee8a39]
>[    0.013542] ACPI: Reserving HPET table memory at [mem 0xdfee8a80-0xdfee8ab7]
>[    0.013543] ACPI: Reserving MCFG table memory at [mem 0xdfee8b00-0xdfee8b3b]
>[    0.013545] ACPI: Reserving APIC table memory at [mem 0xdfee7fc0-0xdfee8057]
>[    0.013596] Scanning NUMA topology in Northbridge 24
>[    0.013601] No NUMA configuration found
>[    0.013602] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
>[    0.013607] NODE_DATA(0) allocated [mem 0x11fff9000-0x11fffdfff]
>[    0.013640] Zone ranges:
>[    0.013642]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.013644]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.013647]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
>[    0.013649]   Device   empty
>[    0.013650] Movable zone start for each node
>[    0.013652] Early memory node ranges
>[    0.013652]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>[    0.013654]   node   0: [mem 0x0000000000100000-0x00000000dfedffff]
>[    0.013656]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
>[    0.013659] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
>[    0.013666] On node 0, zone DMA: 1 pages in unavailable ranges
>[    0.013723] On node 0, zone DMA: 97 pages in unavailable ranges
>[    0.033020] On node 0, zone Normal: 288 pages in unavailable ranges
>[    0.033178] ACPI: PM-Timer IO Port: 0x1008
>[    0.033187] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.033189] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.033191] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.033193] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.033206] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>[    0.033210] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.033213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.033215] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>[    0.033217] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>[    0.033222] ACPI: Using ACPI (MADT) for SMP configuration information
>[    0.033223] ACPI: HPET id: 0x10de8201 base: 0xfefff000
>[    0.033229] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.033247] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.033250] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.033252] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
>[    0.033253] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>[    0.033255] PM: hibernation: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
>[    0.033257] PM: hibernation: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
>[    0.033258] PM: hibernation: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
>[    0.033259] PM: hibernation: Registered nosave memory: [mem 0xdff00000-0xefffffff]
>[    0.033260] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
>[    0.033261] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
>[    0.033263] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
>[    0.033265] [mem 0xdff00000-0xefffffff] available for PCI devices
>[    0.033267] Booting paravirtualized kernel on bare hardware
>[    0.033270] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.039884] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
>[    0.040673] percpu: Embedded 56 pages/cpu s188584 r8192 d32600 u524288
>[    0.040683] pcpu-alloc: s188584 r8192 d32600 u524288 alloc=1*2097152
>[    0.040687] pcpu-alloc: [0] 0 1 2 3 
>[    0.040720] Fallback order for Node 0: 0 
>[    0.040725] Built 1 zonelists, mobility grouping on.  Total pages: 1031652
>[    0.040727] Policy zone: Normal
>[    0.040729] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 root=UUID=898dd7ee-751f-4d3e-a04f-b80ba4a17d60 ro splash quiet noiswmd resume=UUID=78574d11-31e8-43b1-9006-f80aa4810085 audit=0 vga=791
>[    0.040851] audit: disabled (until reboot)
>[    0.040871] Unknown kernel command line parameters "splash noiswmd BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 vga=791", will be passed to user space.
>[    0.042015] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
>[    0.042613] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>[    0.042648] mem auto-init: stack:off, heap alloc:off, heap free:off
>[    0.042651] AGP: Checking aperture...
>[    0.048592] AGP: No AGP bridge found
>[    0.048594] AGP: Node 0: aperture [bus addr 0xa5be000000-0xa5bfffffff] (32MB)
>[    0.048597] Aperture beyond 4GB. Ignoring.
>[    0.048598] AGP: Your BIOS doesn't leave an aperture memory hole
>[    0.048599] AGP: Please enable the IOMMU option in the BIOS setup
>[    0.048600] AGP: This costs you 64MB of RAM
>[    0.048602] AGP: Mapping aperture over RAM [mem 0xd8000000-0xdbffffff] (65536KB)
>[    0.048606] PM: hibernation: Registered nosave memory: [mem 0xd8000000-0xdbffffff]
>[    0.048670] software IO TLB: area num 4.
>[    0.111236] Memory: 3918940K/4192760K available (14344K kernel code, 2086K rwdata, 4824K rodata, 1992K init, 1804K bss, 273560K reserved, 0K cma-reserved)
>[    0.111610] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.111634] ftrace: allocating 42704 entries in 167 pages
>[    0.117745] ftrace: allocated 167 pages with 5 groups
>[    0.118506] Dynamic Preempt: voluntary
>[    0.118566] rcu: Preemptible hierarchical RCU implementation.
>[    0.118567] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
>[    0.118569] 	Trampoline variant of Tasks RCU enabled.
>[    0.118570] 	Rude variant of Tasks RCU enabled.
>[    0.118571] 	Tracing variant of Tasks RCU enabled.
>[    0.118572] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
>[    0.118573] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.126631] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
>[    0.126841] rcu: srcu_init: Setting srcu_struct sizes based on contention.
>[    0.126911] spurious 8259A interrupt: IRQ7.
>[    0.126937] Console: colour dummy device 80x25
>[    0.126958] printk: console [tty0] enabled
>[    0.126998] ACPI: Core revision 20220331
>[    0.127140] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
>[    0.127165] APIC: Switch to symmetric I/O mode setup
>[    0.127663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.132163] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2432ac398d0, max_idle_ns: 440795310320 ns
>[    0.132170] Calibrating delay loop (skipped), value calculated using timer frequency.. 5022.46 BogoMIPS (lpj=2511232)
>[    0.132174] pid_max: default: 32768 minimum: 301
>[    0.132246] LSM: Security Framework initializing
>[    0.132305] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
>[    0.132328] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
>[    0.132718] LVT offset 0 assigned for vector 0xf9
>[    0.132725] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
>[    0.132727] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
>[    0.132732] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>[    0.132735] Spectre V2 : Mitigation: Retpolines
>[    0.132737] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.132739] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>[    0.145505] Freeing SMP alternatives memory: 40K
>[    0.248455] smpboot: CPU0: AMD Athlon(tm) 7550 Dual-Core Processor (family: 0x10, model: 0x2, stepping: 0x3)
>[    0.248683] cblist_init_generic: Setting adjustable number of callback queues.
>[    0.248686] cblist_init_generic: Setting shift to 2 and lim to 1.
>[    0.248712] cblist_init_generic: Setting shift to 2 and lim to 1.
>[    0.248739] cblist_init_generic: Setting shift to 2 and lim to 1.
>[    0.248765] Performance Events: AMD PMU driver.
>[    0.248770] ... version:                0
>[    0.248771] ... bit width:              48
>[    0.248773] ... generic registers:      4
>[    0.248774] ... value mask:             0000ffffffffffff
>[    0.248775] ... max period:             00007fffffffffff
>[    0.248776] ... fixed-purpose events:   0
>[    0.248777] ... event mask:             000000000000000f
>[    0.248890] rcu: Hierarchical SRCU implementation.
>[    0.248892] rcu: 	Max phase no-delay instances is 400.
>[    0.249166] MCE: In-kernel MCE decoding enabled.
>[    0.249196] smp: Bringing up secondary CPUs ...
>[    0.249368] x86: Booting SMP configuration:
>[    0.249369] .... node  #0, CPUs:      #1
>[    0.250206] smp: Brought up 1 node, 2 CPUs
>[    0.250206] smpboot: Max logical packages: 2
>[    0.250206] smpboot: Total of 2 processors activated (10044.92 BogoMIPS)
>[    0.252302] devtmpfs: initialized
>[    0.252302] x86/mm: Memory block size: 128MB
>[    0.253207] ACPI: PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
>[    0.253271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.253278] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
>[    0.253354] pinctrl core: initialized pinctrl subsystem
>[    0.253499] PM: RTC time: 12:16:10, date: 2022-10-27
>[    0.254401] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>[    0.254707] thermal_sys: Registered thermal governor 'fair_share'
>[    0.254708] thermal_sys: Registered thermal governor 'bang_bang'
>[    0.254710] thermal_sys: Registered thermal governor 'step_wise'
>[    0.254711] thermal_sys: Registered thermal governor 'user_space'
>[    0.254802] cpuidle: using governor ladder
>[    0.254808] cpuidle: using governor menu
>[    0.254822] node 0 link 0: io port [b000, ffff]
>[    0.254826] TOM: 00000000e0000000 aka 3584M
>[    0.254828] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
>[    0.254831] node 0 link 0: mmio [a0000, bffff]
>[    0.254835] node 0 link 0: mmio [e0000000, efffffff]
>[    0.254838] node 0 link 0: mmio [f4000000, fe02ffff]
>[    0.254841] node 0 link 0: mmio [f0000000, f04fffff] ==> [f0100000, f04fffff]
>[    0.254845] TOM2: 0000000120000000 aka 4608M
>[    0.254847] bus: [bus 00-04] on node 0 link 0
>[    0.254849] bus: 00 [io  0x0000-0xffff]
>[    0.254851] bus: 00 [mem 0x000a0000-0x000bffff]
>[    0.254852] bus: 00 [mem 0xe0000000-0xefffffff]
>[    0.254854] bus: 00 [mem 0xf0500000-0xffffffff]
>[    0.254855] bus: 00 [mem 0xf0100000-0xf04fffff]
>[    0.254856] bus: 00 [mem 0x120000000-0xfcffffffff]
>[    0.254875] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.254875] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>[    0.254875] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>[    0.254875] PCI: Using configuration type 1 for base access
>[    0.255218] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.255219] mtrr: probably your BIOS does not setup all CPUs.
>[    0.255220] mtrr: corrected configuration.
>[    0.256849] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>[    0.280464] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.280464] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
>[    0.280464] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.280464] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
>[    0.297170] raid6: sse2x4   gen()  7391 MB/s
>[    0.314167] raid6: sse2x2   gen()  7035 MB/s
>[    0.331171] raid6: sse2x1   gen()  5750 MB/s
>[    0.331173] raid6: using algorithm sse2x4 gen() 7391 MB/s
>[    0.348169] raid6: .... xor() 1549 MB/s, rmw enabled
>[    0.348171] raid6: using intx1 recovery algorithm
>[    0.348253] ACPI: Added _OSI(Module Device)
>[    0.348255] ACPI: Added _OSI(Processor Device)
>[    0.348256] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.348257] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.348259] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.348261] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.348262] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
>[    0.351915] ACPI: 2 ACPI AML tables successfully acquired and loaded
>[    0.352125] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.CPU0 (20220331/dspkginit-438)
>[    0.354705] ACPI: Interpreter enabled
>[    0.354737] ACPI: PM: (supports S0 S1 S3 S4 S5)
>[    0.354740] ACPI: Using IOAPIC for interrupt routing
>[    0.354783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.354785] PCI: Using E820 reservations for host bridge windows
>[    0.355013] ACPI: Enabled 6 GPEs in block 00 to 1F
>[    0.361020] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [ASSM] at bit offset/length 524288/32 exceeds size of target Buffer (880 bits) (20220331/dsopcode-198)
>[    0.361035] ACPI Error: Aborting method \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
>[    0.361046] ACPI Error: Method execution failed \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/uteval-68)
>[    0.361443] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.361452] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
>[    0.361460] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
>[    0.361462] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
>[    0.361464] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
>[    0.361478] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.361859] PCI host bridge to bus 0000:00
>[    0.361861] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.361864] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.361867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
>[    0.361869] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
>[    0.361872] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.361909] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
>[    0.362127] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
>[    0.362259] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
>[    0.362268] pci 0000:00:01.1: reg 0x10: [io  0xff00-0xff3f]
>[    0.362283] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
>[    0.362288] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
>[    0.362316] pci 0000:00:01.1: PME# supported from D3hot D3cold
>[    0.362394] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
>[    0.362470] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
>[    0.362479] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
>[    0.362515] pci 0000:00:02.0: supports D1 D2
>[    0.362517] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.362594] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
>[    0.362603] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
>[    0.362643] pci 0000:00:02.1: supports D1 D2
>[    0.362644] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.362731] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
>[    0.362845] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
>[    0.362852] pci 0000:00:08.0: reg 0x10: [io  0x09f0-0x09f7]
>[    0.362856] pci 0000:00:08.0: reg 0x14: [io  0x0bf0-0x0bf3]
>[    0.362860] pci 0000:00:08.0: reg 0x18: [io  0x0970-0x0977]
>[    0.362864] pci 0000:00:08.0: reg 0x1c: [io  0x0b70-0x0b73]
>[    0.362868] pci 0000:00:08.0: reg 0x20: [io  0xf700-0xf70f]
>[    0.362873] pci 0000:00:08.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
>[    0.362963] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
>[    0.362970] pci 0000:00:08.1: reg 0x10: [io  0x09e0-0x09e7]
>[    0.362974] pci 0000:00:08.1: reg 0x14: [io  0x0be0-0x0be3]
>[    0.362978] pci 0000:00:08.1: reg 0x18: [io  0x0960-0x0967]
>[    0.362982] pci 0000:00:08.1: reg 0x1c: [io  0x0b60-0x0b63]
>[    0.362986] pci 0000:00:08.1: reg 0x20: [io  0xf200-0xf20f]
>[    0.362990] pci 0000:00:08.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
>[    0.363097] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
>[    0.363129] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.363216] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
>[    0.363248] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.363332] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
>[    0.363364] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.363448] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
>[    0.363499] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
>[    0.363546] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
>[    0.363593] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
>[    0.363643] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
>[    0.363706] pci_bus 0000:01: extended config space not accessible
>[    0.363736] pci 0000:01:0a.0: [1102:0002] type 00 class 0x040100
>[    0.363749] pci 0000:01:0a.0: reg 0x10: [io  0xec00-0xec1f]
>[    0.363802] pci 0000:01:0a.0: supports D1 D2
>[    0.363847] pci 0000:01:0a.1: [1102:7002] type 00 class 0x098000
>[    0.363859] pci 0000:01:0a.1: reg 0x10: [io  0xe800-0xe807]
>[    0.363911] pci 0000:01:0a.1: supports D1 D2
>[    0.363976] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
>[    0.363979] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
>[    0.363982] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
>[    0.363985] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>[    0.363988] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.363990] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.363992] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
>[    0.363995] pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode)
>[    0.364026] pci 0000:02:00.0: [1002:68f9] type 00 class 0x030000
>[    0.364038] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.364046] pci 0000:02:00.0: reg 0x18: [mem 0xfdcc0000-0xfdcdffff 64bit]
>[    0.364052] pci 0000:02:00.0: reg 0x20: [io  0xdc00-0xdcff]
>[    0.364062] pci 0000:02:00.0: reg 0x30: [mem 0xfdca0000-0xfdcbffff pref]
>[    0.364067] pci 0000:02:00.0: enabling Extended Tags
>[    0.364081] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.364104] pci 0000:02:00.0: supports D1 D2
>[    0.364171] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
>[    0.364183] pci 0000:02:00.1: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
>[    0.364207] pci 0000:02:00.1: enabling Extended Tags
>[    0.364238] pci 0000:02:00.1: supports D1 D2
>[    0.364295] pci 0000:00:09.0: ASPM: current common clock configuration is inconsistent, reconfiguring
>[    0.367185] pci 0000:00:09.0: PCI bridge to [bus 02]
>[    0.367188] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>[    0.367191] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>[    0.367194] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.367221] pci 0000:00:0b.0: PCI bridge to [bus 03]
>[    0.367224] pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
>[    0.367227] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>[    0.367230] pci 0000:00:0b.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
>[    0.367264] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
>[    0.367278] pci 0000:04:00.0: reg 0x10: [io  0xbc00-0xbcff]
>[    0.367295] pci 0000:04:00.0: reg 0x18: [mem 0xfd9ff000-0xfd9fffff 64bit]
>[    0.367306] pci 0000:04:00.0: reg 0x20: [mem 0xfd8fc000-0xfd8fffff 64bit pref]
>[    0.367369] pci 0000:04:00.0: supports D1 D2
>[    0.367371] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.367465] pci 0000:00:0c.0: PCI bridge to [bus 04]
>[    0.367468] pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
>[    0.367471] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff]
>[    0.367474] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
>[    0.367900] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
>[    0.367902] ACPI: PCI: Interrupt link LNK1 disabled
>[    0.367956] ACPI: PCI: Interrupt link LNK2 configured for IRQ 0
>[    0.367957] ACPI: PCI: Interrupt link LNK2 disabled
>[    0.368008] ACPI: PCI: Interrupt link LNK3 configured for IRQ 10
>[    0.368057] ACPI: PCI: Interrupt link LNK4 configured for IRQ 0
>[    0.368060] ACPI: PCI: Interrupt link LNK4 disabled
>[    0.368109] ACPI: PCI: Interrupt link LNK5 configured for IRQ 7
>[    0.368168] ACPI: PCI: Interrupt link LNK6 configured for IRQ 0
>[    0.368170] ACPI: PCI: Interrupt link LNK6 disabled
>[    0.368217] ACPI: PCI: Interrupt link LNK7 configured for IRQ 0
>[    0.368220] ACPI: PCI: Interrupt link LNK7 disabled
>[    0.368267] ACPI: PCI: Interrupt link LNK8 configured for IRQ 11
>[    0.368315] ACPI: PCI: Interrupt link LIGP configured for IRQ 0
>[    0.368318] ACPI: PCI: Interrupt link LIGP disabled
>[    0.368366] ACPI: PCI: Interrupt link LP2P configured for IRQ 0
>[    0.368368] ACPI: PCI: Interrupt link LP2P disabled
>[    0.368417] ACPI: PCI: Interrupt link LUBA configured for IRQ 11
>[    0.368465] ACPI: PCI: Interrupt link LMAC configured for IRQ 0
>[    0.368468] ACPI: PCI: Interrupt link LMAC disabled
>[    0.368516] ACPI: PCI: Interrupt link LAZA configured for IRQ 0
>[    0.368518] ACPI: PCI: Interrupt link LAZA disabled
>[    0.368566] ACPI: PCI: Interrupt link LPMU configured for IRQ 0
>[    0.368568] ACPI: PCI: Interrupt link LPMU disabled
>[    0.368615] ACPI: PCI: Interrupt link LSMB configured for IRQ 10
>[    0.368664] ACPI: PCI: Interrupt link LUB2 configured for IRQ 7
>[    0.368713] ACPI: PCI: Interrupt link LIDE configured for IRQ 0
>[    0.368715] ACPI: PCI: Interrupt link LIDE disabled
>[    0.368763] ACPI: PCI: Interrupt link LSID configured for IRQ 11
>[    0.368813] ACPI: PCI: Interrupt link LFID configured for IRQ 10
>[    0.368898] ACPI: PCI: Interrupt link APC1 configured for IRQ 0
>[    0.368901] ACPI: PCI: Interrupt link APC1 disabled
>[    0.368981] ACPI: PCI: Interrupt link APC2 configured for IRQ 0
>[    0.368983] ACPI: PCI: Interrupt link APC2 disabled
>[    0.369061] ACPI: PCI: Interrupt link APC3 configured for IRQ 0
>[    0.369063] ACPI: PCI: Interrupt link APC3 disabled
>[    0.369138] ACPI: PCI: Interrupt link APC4 configured for IRQ 0
>[    0.369140] ACPI: PCI: Interrupt link APC4 disabled
>[    0.369222] ACPI: PCI: Interrupt link APC5 configured for IRQ 0
>[    0.369224] ACPI: PCI: Interrupt link APC5 disabled
>[    0.369299] ACPI: PCI: Interrupt link APC6 configured for IRQ 0
>[    0.369302] ACPI: PCI: Interrupt link APC6 disabled
>[    0.369377] ACPI: PCI: Interrupt link APC7 configured for IRQ 0
>[    0.369379] ACPI: PCI: Interrupt link APC7 disabled
>[    0.369456] ACPI: PCI: Interrupt link APC8 configured for IRQ 0
>[    0.369459] ACPI: PCI: Interrupt link APC8 disabled
>[    0.369535] ACPI: PCI: Interrupt link AIGP configured for IRQ 0
>[    0.369538] ACPI: PCI: Interrupt link AIGP disabled
>[    0.369615] ACPI: PCI: Interrupt link APCF configured for IRQ 0
>[    0.369617] ACPI: PCI: Interrupt link APCF disabled
>[    0.369695] ACPI: PCI: Interrupt link APCH configured for IRQ 0
>[    0.369698] ACPI: PCI: Interrupt link APCH disabled
>[    0.369779] ACPI: PCI: Interrupt link APMU configured for IRQ 0
>[    0.369782] ACPI: PCI: Interrupt link APMU disabled
>[    0.369859] ACPI: PCI: Interrupt link AAZA configured for IRQ 0
>[    0.369862] ACPI: PCI: Interrupt link AAZA disabled
>[    0.369938] ACPI: PCI: Interrupt link APCS configured for IRQ 0
>[    0.369941] ACPI: PCI: Interrupt link APCS disabled
>[    0.370017] ACPI: PCI: Interrupt link APCL configured for IRQ 0
>[    0.370020] ACPI: PCI: Interrupt link APCL disabled
>[    0.370096] ACPI: PCI: Interrupt link APCM configured for IRQ 0
>[    0.370099] ACPI: PCI: Interrupt link APCM disabled
>[    0.370180] ACPI: PCI: Interrupt link APCZ configured for IRQ 0
>[    0.370182] ACPI: PCI: Interrupt link APCZ disabled
>[    0.370259] ACPI: PCI: Interrupt link APSI configured for IRQ 0
>[    0.370262] ACPI: PCI: Interrupt link APSI disabled
>[    0.370339] ACPI: PCI: Interrupt link APSJ configured for IRQ 0
>[    0.370342] ACPI: PCI: Interrupt link APSJ disabled
>[    0.370516] iommu: Default domain type: Translated 
>[    0.370517] iommu: DMA domain TLB invalidation policy: lazy mode 
>[    0.370732] SCSI subsystem initialized
>[    0.370744] libata version 3.00 loaded.
>[    0.370744] EDAC MC: Ver: 3.0.0
>[    0.371326] NetLabel: Initializing
>[    0.371327] NetLabel:  domain hash size = 128
>[    0.371329] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.371345] NetLabel:  unlabeled traffic allowed by default
>[    0.371346] mctp: management component transport protocol core
>[    0.371347] NET: Registered PF_MCTP protocol family
>[    0.371353] PCI: Using ACPI for IRQ routing
>[    0.372787] PCI: pci_cache_line_size set to 64 bytes
>[    0.372822] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.372824] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
>[    0.372841] pci 0000:02:00.0: vgaarb: setting as boot VGA device
>[    0.372841] pci 0000:02:00.0: vgaarb: bridge control possible
>[    0.372841] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.372841] vgaarb: loaded
>[    0.372841] hpet: 3 channels of 0 reserved for per-cpu timers
>[    0.372841] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>[    0.372841] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>[    0.374224] clocksource: Switched to clocksource tsc-early
>[    0.374419] VFS: Disk quotas dquot_6.6.0
>[    0.374440] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.374518] pnp: PnP ACPI init
>[    0.374667] system 00:00: [io  0x1000-0x107f] has been reserved
>[    0.374672] system 00:00: [io  0x1080-0x10ff] has been reserved
>[    0.374674] system 00:00: [io  0x1400-0x147f] has been reserved
>[    0.374676] system 00:00: [io  0x1480-0x14ff] has been reserved
>[    0.374678] system 00:00: [io  0x1800-0x187f] has been reserved
>[    0.374681] system 00:00: [io  0x1880-0x18ff] has been reserved
>[    0.374721] system 00:01: [io  0x04d0-0x04d1] has been reserved
>[    0.374724] system 00:01: [io  0x0800-0x087f] has been reserved
>[    0.374726] system 00:01: [io  0x0294-0x0297] has been reserved
>[    0.375457] system 00:03: [mem 0xf0000000-0xf3ffffff] has been reserved
>[    0.375480] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [ASSM] at bit offset/length 524288/32 exceeds size of target Buffer (880 bits) (20220331/dsopcode-198)
>[    0.375494] ACPI Error: Aborting method \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
>[    0.375504] ACPI Error: Method execution failed \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/uteval-68)
>[    0.375513] pnp 00:04: can't evaluate _CRS: 12298
>[    0.375553] pnp: PnP ACPI: found 5 devices
>[    0.381830] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.381939] NET: Registered PF_INET protocol family
>[    0.382250] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
>[    0.383364] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
>[    0.383382] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
>[    0.383392] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
>[    0.383498] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
>[    0.383713] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.383857] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
>[    0.383891] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
>[    0.383990] NET: Registered PF_UNIX/PF_LOCAL protocol family
>[    0.384008] NET: Registered PF_XDP protocol family
>[    0.384031] pci 0000:00:04.0: PCI bridge to [bus 01]
>[    0.384037] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
>[    0.384042] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
>[    0.384045] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>[    0.384051] pci 0000:00:09.0: PCI bridge to [bus 02]
>[    0.384053] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
>[    0.384056] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
>[    0.384058] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.384062] pci 0000:00:0b.0: PCI bridge to [bus 03]
>[    0.384064] pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
>[    0.384066] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
>[    0.384068] pci 0000:00:0b.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
>[    0.384073] pci 0000:00:0c.0: PCI bridge to [bus 04]
>[    0.384074] pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
>[    0.384077] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff]
>[    0.384079] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
>[    0.384087] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.384089] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.384091] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
>[    0.384093] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff window]
>[    0.384096] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.384098] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
>[    0.384100] pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref]
>[    0.384102] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
>[    0.384104] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
>[    0.384106] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff window]
>[    0.384108] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xfebfffff window]
>[    0.384110] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.384112] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
>[    0.384114] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.384117] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>[    0.384119] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
>[    0.384121] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
>[    0.384123] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>[    0.384125] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
>[    0.384127] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
>[    0.384500] ACPI: \_SB_.PCI0.APCF: Enabled at IRQ 23
>[    0.384826] ACPI: \_SB_.PCI0.APCL: Enabled at IRQ 22
>[    0.384949] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.384991] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.385031] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.385075] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.385120] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.385168] pci 0000:00:00.0: Found enabled HT MSI Mapping
>[    0.385231] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
>[    0.385238] PCI: CLS 32 bytes, default 64
>[    0.385313] Trying to unpack rootfs image as initramfs...
>[    0.394767] PCI-DMA: Disabling AGP.
>[    0.394853] PCI-DMA: aperture base @ d8000000 size 65536 KB
>[    0.394856] PCI-DMA: using GART IOMMU.
>[    0.394859] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>[    0.395146] software IO TLB: tearing down default memory pool
>[    0.397479] LVT offset 1 assigned for vector 0x400
>[    0.397493] LVT offset 1 assigned
>[    0.397788] perf: AMD IBS detected (0x00000007)
>[    0.398220] Initialise system trusted keyrings
>[    0.398305] workingset: timestamp_bits=40 max_order=20 bucket_order=0
>[    0.400688] zbud: loaded
>[    0.413010] xor: measuring software checksum speed
>[    0.413764]    prefetch64-sse  : 13234 MB/sec
>[    0.414601]    generic_sse     : 11820 MB/sec
>[    0.414603] xor: using function: prefetch64-sse (13234 MB/sec)
>[    0.414610] Key type asymmetric registered
>[    0.414612] Asymmetric key parser 'x509' registered
>[    0.414634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
>[    0.414718] io scheduler mq-deadline registered
>[    0.414720] io scheduler kyber registered
>[    0.414768] io scheduler bfq registered
>[    0.416060] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.416518] Linux agpgart interface v0.103
>[    0.419092] brd: module loaded
>[    0.419620] i8042: PNP: No PS/2 controller found.
>[    0.419678] mousedev: PS/2 mouse device common for all mice
>[    0.419730] rtc_cmos 00:02: RTC can wake from S4
>[    0.420051] rtc_cmos 00:02: registered as rtc0
>[    0.420095] rtc_cmos 00:02: setting system clock to 2022-10-27T12:16:10 UTC (1666872970)
>[    0.420124] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>[    0.420247] ledtrig-cpu: registered to indicate activity on CPUs
>[    0.420280] vesafb: mode is 1024x768x16, linelength=2048, pages=9
>[    0.420283] vesafb: scrolling: redraw
>[    0.420284] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>[    0.420299] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 16384k
>[    0.420418] Console: switching to colour frame buffer device 128x48
>[    0.425258] fb0: VESA VGA frame buffer device
>[    0.425497] Key type dns_resolver registered
>[    0.425499] mpls_gso: MPLS GSO support
>[    0.425746] microcode: CPU0: patch_level=0x01000095
>[    0.425756] microcode: CPU1: patch_level=0x01000095
>[    0.425761] microcode: Microcode Update Driver: v2.2.
>[    0.425765] IPI shorthand broadcast: enabled
>[    0.425789] sched_clock: Marking stable (425407224, 293323)->(442962638, -17262091)
>[    0.425934] registered taskstats version 1
>[    0.425943] Loading compiled-in X.509 certificates
>[    0.426077] zswap: loaded using pool lzo/zbud
>[    0.426217] Key type ._fscrypt registered
>[    0.426219] Key type .fscrypt registered
>[    0.426220] Key type fscrypt-provisioning registered
>[    0.426749] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
>[    0.933940] Freeing initrd memory: 35612K
>[    0.937732] Key type encrypted registered
>[    0.939419] PM:   Magic number: 10:47:280
>[    0.939458] tty tty17: hash matches
>[    0.939577] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>[    0.941477] Freeing unused kernel image (initmem) memory: 1992K
>[    0.943237] Write protecting the kernel read-only data: 22528k
>[    0.944229] Freeing unused kernel image (text/rodata gap) memory: 2036K
>[    0.944767] Freeing unused kernel image (rodata/data gap) memory: 1320K
>[    0.993009] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    0.993019] Run /init as init process
>[    0.993021]   with arguments:
>[    0.993022]     /init
>[    0.993024]     splash
>[    0.993025]     noiswmd
>[    0.993026]   with environment:
>[    0.993027]     HOME=/
>[    0.993028]     TERM=linux
>[    0.993029]     BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9
>[    0.993030]     vga=791
>[    1.054487] dracut: Mageia-9
>[    1.288412] ACPI: bus type drm_connector registered
>[    1.467327] tsc: Refined TSC clocksource calibration: 2511.421 MHz
>[    1.467340] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24335ebd627, max_idle_ns: 440795266246 ns
>[    1.467362] clocksource: Switched to clocksource tsc
>[    1.468045] [drm] radeon kernel modesetting enabled.
>[    1.468266] Console: switching to colour dummy device 80x25
>[    1.468299] radeon 0000:02:00.0: vgaarb: deactivate vga console
>[    1.468625] ACPI: \_SB_.PCI0.APC8: Enabled at IRQ 16
>[    1.468788] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1545:0x5450 0x00).
>[    1.468825] radeon 0000:02:00.0: No more image in the PCI ROM
>[    1.469534] ATOM BIOS: CEDAR
>[    1.469583] radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
>[    1.469586] radeon 0000:02:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
>[    1.469591] [drm] Detected VRAM RAM=2048M, BAR=256M
>[    1.469593] [drm] RAM width 64bits DDR
>[    1.469626] [drm] radeon: 2048M of VRAM memory ready
>[    1.469628] [drm] radeon: 1024M of GTT memory ready.
>[    1.469634] [drm] Loading CEDAR Microcode
>[    1.469736] [drm] Internal thermal controller with fan control
>[    1.492022] [drm] radeon: dpm initialized
>[    1.492119] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    1.512879] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
>[    1.512969] radeon 0000:02:00.0: WB enabled
>[    1.512973] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
>[    1.512976] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
>[    1.513350] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
>[    1.513743] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
>[    1.513797] radeon 0000:02:00.0: radeon: using MSI.
>[    1.513824] [drm] radeon: irq initialized.
>[    1.529961] [drm] ring test on 0 succeeded in 1 usecs
>[    1.529967] [drm] ring test on 3 succeeded in 2 usecs
>[    1.717133] [drm] ring test on 5 succeeded in 1 usecs
>[    1.717138] [drm] UVD initialized successfully.
>[    1.717206] [drm] ib test on ring 0 succeeded in 0 usecs
>[    1.717237] [drm] ib test on ring 3 succeeded in 0 usecs
>[    2.391187] [drm] ib test on ring 5 succeeded
>[    2.391628] [drm] Radeon Display Connectors
>[    2.391629] [drm] Connector 0:
>[    2.391630] [drm]   HDMI-A-1
>[    2.391631] [drm]   HPD2
>[    2.391632] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[    2.391635] [drm]   Encoders:
>[    2.391636] [drm]     DFP1: INTERNAL_UNIPHY1
>[    2.391637] [drm] Connector 1:
>[    2.391638] [drm]   DVI-D-1
>[    2.391639] [drm]   HPD4
>[    2.391640] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    2.391642] [drm]   Encoders:
>[    2.391643] [drm]     DFP2: INTERNAL_UNIPHY
>[    2.391644] [drm] Connector 2:
>[    2.391645] [drm]   VGA-1
>[    2.391646] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    2.391648] [drm]   Encoders:
>[    2.391649] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    2.474844] [drm] fb mappable at 0xE034D000
>[    2.474847] [drm] vram apper at 0xE0000000
>[    2.474848] [drm] size 8294400
>[    2.474849] [drm] fb depth is 24
>[    2.474850] [drm]    pitch is 7680
>[    2.474915] fbcon: radeondrmfb (fb0) is primary device
>[    2.483418] Console: switching to colour frame buffer device 240x67
>[    2.487135] radeon 0000:02:00.0: [drm] fb0: radeondrmfb frame buffer device
>[    2.492224] [drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 0
>[    2.497597] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
>[    4.868873] [drm] amdgpu kernel modesetting enabled.
>[    4.868998] amdgpu: CRAT table not found
>[    4.869002] amdgpu: Virtual CRAT table created for CPU
>[    4.869021] amdgpu: Topology: Add CPU node
>[    4.879541] dracut: Starting plymouth daemon
>[    5.718126] sata_nv 0000:00:08.0: version 3.5
>[    5.718408] ACPI: \_SB_.PCI0.APSI: Enabled at IRQ 20
>[    5.727976] scsi host0: sata_nv
>[    5.740236] scsi host1: sata_nv
>[    5.740306] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 20
>[    5.740309] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 20
>[    5.740661] ACPI: \_SB_.PCI0.APSJ: Enabled at IRQ 21
>[    5.747242] scsi host2: sata_nv
>[    5.755238] scsi host3: sata_nv
>[    5.755304] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 21
>[    5.755308] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 21
>[    5.786244] ACPI: bus type USB registered
>[    5.786288] usbcore: registered new interface driver usbfs
>[    5.786303] usbcore: registered new interface driver hub
>[    5.786323] usbcore: registered new device driver usb
>[    6.070590] ata3: SATA link down (SStatus 0 SControl 300)
>[    6.199199] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    6.218280] ata1.00: ATA-11: WD Blue SA510 2.5 500GB, 52008100, max UDMA/133
>[    6.218284] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
>[    6.231569] ata1.00: Features: Dev-Sleep
>[    6.263586] ata1.00: configured for UDMA/133
>[    6.263764] scsi 0:0:0:0: Direct-Access     ATA      WD Blue SA510 2. 8100 PQ: 0 ANSI: 5
>[    6.264237] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    6.264249] sd 0:0:0:0: [sda] Write Protect is off
>[    6.264252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    6.264283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    6.264321] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[    6.265643]  sda: sda1 sda2 < sda5 sda6 >
>[    6.265853] sd 0:0:0:0: [sda] Attached SCSI disk
>[    6.727202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    6.729476] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, 4403, max UDMA/33
>[    6.733913] ata2.00: configured for UDMA/33
>[    6.734826] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653Z  4403 PQ: 0 ANSI: 5
>[    7.070531] ata4: SATA link down (SStatus 0 SControl 300)
>[    7.078694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    7.086938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    7.086945] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>[    7.087734] ehci-pci: EHCI PCI platform driver
>[    7.087939] ehci-pci 0000:00:02.1: EHCI Host Controller
>[    7.087954] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
>[    7.087965] ehci-pci 0000:00:02.1: debug port 1
>[    7.088030] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
>[    7.094186] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
>[    7.094292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
>[    7.094295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.094298] usb usb1: Product: EHCI Host Controller
>[    7.094301] usb usb1: Manufacturer: Linux 6.0.3-desktop-2.mga9 ehci_hcd
>[    7.094302] usb usb1: SerialNumber: 0000:00:02.1
>[    7.094496] hub 1-0:1.0: USB hub found
>[    7.094505] hub 1-0:1.0: 10 ports detected
>[    7.096738] ohci-pci: OHCI PCI platform driver
>[    7.096937] ohci-pci 0000:00:02.0: OHCI PCI host controller
>[    7.096951] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
>[    7.097008] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
>[    7.108394] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>[    7.108401] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    7.125707] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    7.150246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
>[    7.150253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.150256] usb usb2: Product: OHCI PCI host controller
>[    7.150258] usb usb2: Manufacturer: Linux 6.0.3-desktop-2.mga9 ohci_hcd
>[    7.150260] usb usb2: SerialNumber: 0000:00:02.0
>[    7.150516] hub 2-0:1.0: USB hub found
>[    7.150562] hub 2-0:1.0: 10 ports detected
>[    7.322005] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
>[    7.338182] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    7.350577] EXT4-fs (sda1): unmounting filesystem.
>[    7.360524] dracut: Checking ext4: /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60
>[    7.360708] dracut: issuing e2fsck -a /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60
>[    7.369210] dracut: /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60: clean, 196514/3301376 files, 2036290/13183084 blocks
>[    7.371560] dracut: Mounting /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60 with -o rw,relatime,ro
>[    7.397358] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
>[    7.425622] dracut: Mounted root filesystem /dev/sda1
>[    7.468803] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
>[    7.468813] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    7.468815] usb 1-1: Product: USB 2.0 Hub
>[    7.469091] hub 1-1:1.0: USB hub found
>[    7.471193] hub 1-1:1.0: 4 ports detected
>[    7.513947] dracut: Switching root
>[    7.585184] usb 1-2: new high-speed USB device number 3 using ehci-pci
>[    7.628341] systemd[1]: Inserted module 'autofs4'
>[    7.685747] NET: Registered PF_INET6 protocol family
>[    7.686265] Segment Routing with IPv6
>[    7.686279] In-situ OAM (IOAM) with IPv6
>[    7.707910] systemd[1]: systemd 251 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
>[    7.707919] systemd[1]: Detected architecture x86-64.
>[    7.708566] systemd[1]: Hostname set to <localhost>.
>[    7.716049] usb 1-2: New USB device found, idVendor=03f0, idProduct=e511, bcdDevice= 1.00
>[    7.716059] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    7.716062] usb 1-2: Product: OfficeJet 3830 series
>[    7.716065] usb 1-2: Manufacturer: HP
>[    7.716066] usb 1-2: SerialNumber: CN94B7Q5H206VZ
>[    7.896180] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
>[    7.950302] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network-up' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    7.950655] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/resolvconf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    7.951022] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/numlock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    7.951098] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/msec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    7.951134] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    7.953929] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network-auth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[    8.094432] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
>[    8.094442] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    8.094445] usb 1-1.1: Product: USB2.0 Hub
>[    8.094900] hub 1-1.1:1.0: USB hub found
>[    8.095179] hub 1-1.1:1.0: 4 ports detected
>[    8.149074] systemd[1]: Queued start job for default target Graphical Interface.
>[    8.159830] systemd[1]: Created slice Slice /system/getty.
>[    8.160404] systemd[1]: Created slice Slice /system/modprobe.
>[    8.160812] systemd[1]: Created slice Slice /system/systemd-fsck.
>[    8.161077] systemd[1]: Created slice User and Session Slice.
>[    8.161194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    8.161402] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    8.161475] systemd[1]: Reached target Login Prompts.
>[    8.161499] systemd[1]: Reached target Local Integrity Protected Volumes.
>[    8.161559] systemd[1]: Reached target Remote File Systems.
>[    8.161580] systemd[1]: Reached target RPC Port Mapper.
>[    8.161608] systemd[1]: Reached target Slice Units.
>[    8.161662] systemd[1]: Reached target Local Verity Protected Volumes.
>[    8.161776] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    8.164041] systemd[1]: Listening on Process Core Dump Socket.
>[    8.164127] systemd[1]: Listening on initctl Compatibility Named Pipe.
>[    8.168047] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
>[    8.168326] systemd[1]: Listening on Journal Socket (/dev/log).
>[    8.168479] systemd[1]: Listening on Journal Socket.
>[    8.170556] systemd[1]: Listening on udev Control Socket.
>[    8.170687] systemd[1]: Listening on udev Kernel Socket.
>[    8.172013] systemd[1]: Mounting Huge Pages File System...
>[    8.173252] systemd[1]: Mounting POSIX Message Queue File System...
>[    8.174522] systemd[1]: Mounting Kernel Debug File System...
>[    8.176352] systemd[1]: Mounting Kernel Trace File System...
>[    8.181327] systemd[1]: Starting Create List of Static Device Nodes...
>[    8.183614] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    8.185029] systemd[1]: Starting Software RAID Monitor Takeover...
>[    8.186511] systemd[1]: Starting Load Kernel Module configfs...
>[    8.192782] systemd[1]: Starting Load Kernel Module drm...
>[    8.194335] systemd[1]: Starting Load Kernel Module fuse...
>[    8.199926] systemd[1]: Starting File System Check on Root Device...
>[    8.204353] systemd[1]: Starting Journal Service...
>[    8.223828] systemd[1]: Starting Load Kernel Modules...
>[    8.223979] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
>[    8.226098] fuse: init (API version 7.36)
>[    8.230157] systemd[1]: Starting Coldplug All udev Devices...
>[    8.234610] systemd[1]: Mounted Huge Pages File System.
>[    8.234921] systemd[1]: Mounted POSIX Message Queue File System.
>[    8.235137] systemd[1]: Mounted Kernel Debug File System.
>[    8.235372] systemd[1]: Mounted Kernel Trace File System.
>[    8.235768] systemd[1]: Finished Create List of Static Device Nodes.
>[    8.240006] systemd[1]: Started Software RAID Monitor Takeover.
>[    8.240497] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>[    8.240684] systemd[1]: Finished Load Kernel Module configfs.
>[    8.240957] systemd[1]: modprobe@drm.service: Deactivated successfully.
>[    8.241109] systemd[1]: Finished Load Kernel Module drm.
>[    8.241389] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>[    8.241537] systemd[1]: Finished Load Kernel Module fuse.
>[    8.241769] systemd[1]: Finished Load Kernel Modules.
>[    8.246434] systemd[1]: Mounting FUSE Control File System...
>[    8.248006] systemd[1]: Mounting Kernel Configuration File System...
>[    8.251544] systemd[1]: Starting Apply Kernel Variables...
>[    8.258240] systemd[1]: Finished File System Check on Root Device.
>[    8.281611] systemd[1]: Starting Remount Root and Kernel File Systems...
>[    8.283489] systemd[1]: Mounted FUSE Control File System.
>[    8.287959] systemd[1]: Mounted Kernel Configuration File System.
>[    8.311672] systemd[1]: Finished Apply Kernel Variables.
>[    8.318383] EXT4-fs (sda1): re-mounted. Quota mode: none.
>[    8.320511] systemd[1]: Finished Remount Root and Kernel File Systems.
>[    8.320820] systemd[1]: OSTree Remount OS/ Bind Mounts was skipped because of a failed condition check (ConditionKernelCommandLine=ostree).
>[    8.320894] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
>[    8.326665] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
>[    8.330401] systemd[1]: Starting Load/Save Random Seed...
>[    8.330518] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
>[    8.331956] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    8.337295] systemd[1]: Starting Setup Virtual Console...
>[    8.400076] systemd[1]: Finished Create Static Device Nodes in /dev.
>[    8.406370] systemd[1]: Starting Rule-based Manager for Device Events and Files...
>[    8.420570] systemd[1]: Finished Coldplug All udev Devices.
>[    8.424419] systemd[1]: Starting Wait for udev To Complete Device Initialization...
>[    8.460943] systemd[1]: Finished Setup Virtual Console.
>[    8.466958] systemd[1]: Started Journal Service.
>[    8.483064] systemd-journald[536]: Received client request to flush runtime journal.
>[    8.483191] usb 2-4: new full-speed USB device number 2 using ohci-pci
>[    8.499175] random: crng init done
>[    8.701213] usb 2-4: New USB device found, idVendor=258a, idProduct=0016, bcdDevice= 0.01
>[    8.701223] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.701226] usb 2-4: Product: Usb Gaming Keyboard
>[    8.701228] usb 2-4: Manufacturer: BY Tech
>[    8.925475] i2c i2c-8: nForce2 SMBus adapter at 0x1c00
>[    8.925506] i2c i2c-9: nForce2 SMBus adapter at 0x1c40
>[    8.930921] acpi_cpufreq: overriding BIOS provided _PSD data
>[    8.952309] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    8.952355] ACPI: button: Power Button [PWRB]
>[    8.952454] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    8.956237] ACPI: button: Power Button [PWRF]
>[    8.966143] ACPI: \_TZ_.THRM: Invalid passive threshold
>[    8.966562] thermal LNXTHERM:00: registered as thermal_zone0
>[    8.966565] ACPI: thermal: Thermal Zone [THRM] (40 C)
>[    8.992194] gameport gameport0: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xe800, speed 1128kHz
>[    9.088415] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
>[    9.151188] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
>[    9.239546] Adding 4191344k swap on /dev/sda5.  Priority:-2 extents:1 across:4191344k SSFS
>[    9.288592] ACPI: \_SB_.PCI0.APC5: Enabled at IRQ 16
>[    9.288633] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    9.297051] r8169 0000:04:00.0 eth0: RTL8168e/8111e, 98:48:27:4f:2c:7a, XID 2c2, IRQ 25
>[    9.297061] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
>[    9.320750] r8169 0000:04:00.0 enp4s0: renamed from eth0
>[    9.349801] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
>[    9.349810] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    9.349813] usb 1-1.4: Product: USB 2.0 Hub
>[    9.350091] hub 1-1.4:1.0: USB hub found
>[    9.351082] hub 1-1.4:1.0: 4 ports detected
>[    9.355160] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card0/input2
>[    9.396179] hid: raw HID events driver (C) Jiri Kosina
>[    9.413209] usb 1-1.1.4: new full-speed USB device number 7 using ehci-pci
>[    9.426757] usbcore: registered new interface driver usbhid
>[    9.426762] usbhid: USB HID core driver
>[    9.513680] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:258A:0016.0001/input/input3
>[    9.515757] ACPI: \_SB_.PCI0.APC3: Enabled at IRQ 18
>[    9.524924] usb 1-1.1.4: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13
>[    9.524934] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.524937] usb 1-1.1.4: Product: 2.4G Keyboard Mouse
>[    9.524939] usb 1-1.1.4: Manufacturer: MOSART Semi.
>[    9.526469] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:062A:4101.0003/input/input4
>[    9.546707] kvm: support for 'kvm_amd' disabled by bios
>[    9.567442] hid-generic 0003:258A:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:00:02.0-4/input0
>[    9.568125] kvm: support for 'kvm_amd' disabled by bios
>[    9.568674] input: BY Tech Usb Gaming Keyboard System Control as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input5
>[    9.619319] hid-generic 0003:062A:4101.0003: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:02.1-1.1.4/input0
>[    9.621482] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input10
>[    9.671378] input: BY Tech Usb Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input6
>[    9.671667] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input8
>[    9.671987] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input11
>[    9.723298] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input12
>[    9.723410] input: BY Tech Usb Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input9
>[    9.723656] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input13
>[    9.723840] hid-generic 0003:258A:0016.0002: input,hiddev0,hidraw2: USB HID v1.10 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:00:02.0-4/input1
>[    9.723918] hid-generic 0003:062A:4101.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:02.1-1.1.4/input1
>[    9.868188] usb 2-5: new full-speed USB device number 3 using ohci-pci
>[   10.089203] usb 2-5: New USB device found, idVendor=0a5c, idProduct=21e8, bcdDevice= 1.12
>[   10.089216] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[   10.089222] usb 2-5: Product: BCM20702A0
>[   10.089226] usb 2-5: Manufacturer: Broadcom Corp
>[   10.089229] usb 2-5: SerialNumber: 001986001785
>[   10.710445] usblp 1-2:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE511
>[   10.710605] usbcore: registered new interface driver usblp
>[   10.841052] Bluetooth: Core ver 2.22
>[   10.841094] NET: Registered PF_BLUETOOTH protocol family
>[   10.841097] Bluetooth: HCI device and connection manager initialized
>[   10.841104] Bluetooth: HCI socket layer initialized
>[   10.841107] Bluetooth: L2CAP socket layer initialized
>[   10.841112] Bluetooth: SCO socket layer initialized
>[   10.857577] usbcore: registered new interface driver btusb
>[   10.972637] device-mapper: uevent: version 1.0.3
>[   10.972750] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
>[   10.981235] Bluetooth: hci0: BCM: chip id 63
>[   10.984210] Bluetooth: hci0: BCM: features 0x07
>[   11.002210] Bluetooth: hci0: BCM20702A
>[   11.002217] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
>[   11.011791] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
>[   11.011801] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0a5c-21e8.hcd'
>[   11.011804] Bluetooth: hci0: BCM: 'brcm/BCM-0a5c-21e8.hcd'
>[   11.061273] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none.
>[   12.677109] RTL8211DN Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
>[   12.942903] r8169 0000:04:00.0 enp4s0: Link is Down
>[   13.217428] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[   13.222447] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[   15.691239] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
>[   15.691264] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
>[   17.582133] NET: Registered PF_PACKET protocol family
>[   18.637748] usblp2: removed
>[   18.881704] netfilter PSD loaded - (c) astaro AG
>[   18.887574] IFWLOG: register target
>[   19.189999] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4821 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
>[   19.305015] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4826 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
>[   19.505179] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4841 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
>[   19.705113] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4843 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
>[   19.790235] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
>[   19.974204] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
>[   20.174207] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
>[   20.374255] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562

[    0.000000] Linux version 6.0.3-desktop-2.mga9 (iurt@ecosse.mageia.org) (gcc (Mageia 12.2.1-0.20221022.1.mga9) 12.2.1 20221022, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT_DYNAMIC Sun Oct 23 17:24:08 UTC 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 root=UUID=898dd7ee-751f-4d3e-a04f-b80ba4a17d60 ro splash quiet noiswmd resume=UUID=78574d11-31e8-43b1-9006-f80aa4810085 audit=0 vga=791
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] signal: max sigframe size: 1440
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Compaq-Presario NP185AAR-ABA CQ5110F/NARRA5, BIOS  5.49 08/06/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2511.232 MHz processor
[    0.003689] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003693] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.009640] AGP: No AGP bridge found
[    0.009699] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.010239] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010362] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.010376] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[    0.012982] found SMP MP-table at [mem 0x000f53c0-0x000f53cf]
[    0.013010] Using GB pages for direct mapping
[    0.013435] RAMDISK: [mem 0x33a62000-0x35d28fff]
[    0.013446] ACPI: Early table checksum verification disabled
[    0.013452] ACPI: RSDP 0x00000000000F7500 000024 (v02 HPQOEM)
[    0.013457] ACPI: XSDT 0x00000000DFEE3100 000054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[    0.013465] ACPI: FACP 0x00000000DFEE7E80 0000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[    0.013472] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20220331/tbfadt-564)
[    0.013477] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20220331/tbfadt-564)
[    0.013480] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20220331/tbfadt-564)
[    0.013483] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20220331/tbfadt-564)
[    0.013486] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20220331/tbfadt-564)
[    0.013490] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20220331/tbfadt-669)
[    0.013493] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20220331/tbfadt-669)
[    0.013496] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20220331/tbfadt-669)
[    0.013500] ACPI: DSDT 0x00000000DFEE32C0 004B61 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000)
[    0.013505] ACPI: FACS 0x00000000DFEE0000 000040
[    0.013508] ACPI: FACS 0x00000000DFEE0000 000040
[    0.013512] ACPI: SLIC 0x00000000DFEE80C0 000176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[    0.013516] ACPI: SSDT 0x00000000DFEE8280 0007BA (v01 HPQOEM SLIC-CPC 00000001  LTP 00000001)
[    0.013520] ACPI: HPET 0x00000000DFEE8A80 000038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098)
[    0.013524] ACPI: MCFG 0x00000000DFEE8B00 00003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[    0.013528] ACPI: APIC 0x00000000DFEE7FC0 000098 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000)
[    0.013532] ACPI: Reserving FACP table memory at [mem 0xdfee7e80-0xdfee7f73]
[    0.013534] ACPI: Reserving DSDT table memory at [mem 0xdfee32c0-0xdfee7e20]
[    0.013536] ACPI: Reserving FACS table memory at [mem 0xdfee0000-0xdfee003f]
[    0.013537] ACPI: Reserving FACS table memory at [mem 0xdfee0000-0xdfee003f]
[    0.013539] ACPI: Reserving SLIC table memory at [mem 0xdfee80c0-0xdfee8235]
[    0.013540] ACPI: Reserving SSDT table memory at [mem 0xdfee8280-0xdfee8a39]
[    0.013542] ACPI: Reserving HPET table memory at [mem 0xdfee8a80-0xdfee8ab7]
[    0.013543] ACPI: Reserving MCFG table memory at [mem 0xdfee8b00-0xdfee8b3b]
[    0.013545] ACPI: Reserving APIC table memory at [mem 0xdfee7fc0-0xdfee8057]
[    0.013596] Scanning NUMA topology in Northbridge 24
[    0.013601] No NUMA configuration found
[    0.013602] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.013607] NODE_DATA(0) allocated [mem 0x11fff9000-0x11fffdfff]
[    0.013640] Zone ranges:
[    0.013642]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013644]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013647]   Normal   [mem 0x0000000100000000-0x000000011fffffff]
[    0.013649]   Device   empty
[    0.013650] Movable zone start for each node
[    0.013652] Early memory node ranges
[    0.013652]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.013654]   node   0: [mem 0x0000000000100000-0x00000000dfedffff]
[    0.013656]   node   0: [mem 0x0000000100000000-0x000000011fffffff]
[    0.013659] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[    0.013666] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013723] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.033020] On node 0, zone Normal: 288 pages in unavailable ranges
[    0.033178] ACPI: PM-Timer IO Port: 0x1008
[    0.033187] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.033189] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.033191] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.033193] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.033206] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[    0.033210] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.033213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.033215] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.033217] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.033222] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.033223] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.033229] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.033247] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.033250] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.033252] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.033253] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.033255] PM: hibernation: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
[    0.033257] PM: hibernation: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
[    0.033258] PM: hibernation: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
[    0.033259] PM: hibernation: Registered nosave memory: [mem 0xdff00000-0xefffffff]
[    0.033260] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.033261] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[    0.033263] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.033265] [mem 0xdff00000-0xefffffff] available for PCI devices
[    0.033267] Booting paravirtualized kernel on bare hardware
[    0.033270] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.039884] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.040673] percpu: Embedded 56 pages/cpu s188584 r8192 d32600 u524288
[    0.040683] pcpu-alloc: s188584 r8192 d32600 u524288 alloc=1*2097152
[    0.040687] pcpu-alloc: [0] 0 1 2 3 
[    0.040720] Fallback order for Node 0: 0 
[    0.040725] Built 1 zonelists, mobility grouping on.  Total pages: 1031652
[    0.040727] Policy zone: Normal
[    0.040729] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 root=UUID=898dd7ee-751f-4d3e-a04f-b80ba4a17d60 ro splash quiet noiswmd resume=UUID=78574d11-31e8-43b1-9006-f80aa4810085 audit=0 vga=791
[    0.040851] audit: disabled (until reboot)
[    0.040871] Unknown kernel command line parameters "splash noiswmd BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9 vga=791", will be passed to user space.
[    0.042015] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.042613] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.042648] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.042651] AGP: Checking aperture...
[    0.048592] AGP: No AGP bridge found
[    0.048594] AGP: Node 0: aperture [bus addr 0xa5be000000-0xa5bfffffff] (32MB)
[    0.048597] Aperture beyond 4GB. Ignoring.
[    0.048598] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.048599] AGP: Please enable the IOMMU option in the BIOS setup
[    0.048600] AGP: This costs you 64MB of RAM
[    0.048602] AGP: Mapping aperture over RAM [mem 0xd8000000-0xdbffffff] (65536KB)
[    0.048606] PM: hibernation: Registered nosave memory: [mem 0xd8000000-0xdbffffff]
[    0.048670] software IO TLB: area num 4.
[    0.111236] Memory: 3918940K/4192760K available (14344K kernel code, 2086K rwdata, 4824K rodata, 1992K init, 1804K bss, 273560K reserved, 0K cma-reserved)
[    0.111610] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.111634] ftrace: allocating 42704 entries in 167 pages
[    0.117745] ftrace: allocated 167 pages with 5 groups
[    0.118506] Dynamic Preempt: voluntary
[    0.118566] rcu: Preemptible hierarchical RCU implementation.
[    0.118567] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.118569] 	Trampoline variant of Tasks RCU enabled.
[    0.118570] 	Rude variant of Tasks RCU enabled.
[    0.118571] 	Tracing variant of Tasks RCU enabled.
[    0.118572] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.118573] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.126631] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[    0.126841] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.126911] spurious 8259A interrupt: IRQ7.
[    0.126937] Console: colour dummy device 80x25
[    0.126958] printk: console [tty0] enabled
[    0.126998] ACPI: Core revision 20220331
[    0.127140] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.127165] APIC: Switch to symmetric I/O mode setup
[    0.127663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.132163] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2432ac398d0, max_idle_ns: 440795310320 ns
[    0.132170] Calibrating delay loop (skipped), value calculated using timer frequency.. 5022.46 BogoMIPS (lpj=2511232)
[    0.132174] pid_max: default: 32768 minimum: 301
[    0.132246] LSM: Security Framework initializing
[    0.132305] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.132328] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.132718] LVT offset 0 assigned for vector 0xf9
[    0.132725] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.132727] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.132732] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.132735] Spectre V2 : Mitigation: Retpolines
[    0.132737] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.132739] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.145505] Freeing SMP alternatives memory: 40K
[    0.248455] smpboot: CPU0: AMD Athlon(tm) 7550 Dual-Core Processor (family: 0x10, model: 0x2, stepping: 0x3)
[    0.248683] cblist_init_generic: Setting adjustable number of callback queues.
[    0.248686] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.248712] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.248739] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.248765] Performance Events: AMD PMU driver.
[    0.248770] ... version:                0
[    0.248771] ... bit width:              48
[    0.248773] ... generic registers:      4
[    0.248774] ... value mask:             0000ffffffffffff
[    0.248775] ... max period:             00007fffffffffff
[    0.248776] ... fixed-purpose events:   0
[    0.248777] ... event mask:             000000000000000f
[    0.248890] rcu: Hierarchical SRCU implementation.
[    0.248892] rcu: 	Max phase no-delay instances is 400.
[    0.249166] MCE: In-kernel MCE decoding enabled.
[    0.249196] smp: Bringing up secondary CPUs ...
[    0.249368] x86: Booting SMP configuration:
[    0.249369] .... node  #0, CPUs:      #1
[    0.250206] smp: Brought up 1 node, 2 CPUs
[    0.250206] smpboot: Max logical packages: 2
[    0.250206] smpboot: Total of 2 processors activated (10044.92 BogoMIPS)
[    0.252302] devtmpfs: initialized
[    0.252302] x86/mm: Memory block size: 128MB
[    0.253207] ACPI: PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
[    0.253271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.253278] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.253354] pinctrl core: initialized pinctrl subsystem
[    0.253499] PM: RTC time: 12:16:10, date: 2022-10-27
[    0.254401] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.254707] thermal_sys: Registered thermal governor 'fair_share'
[    0.254708] thermal_sys: Registered thermal governor 'bang_bang'
[    0.254710] thermal_sys: Registered thermal governor 'step_wise'
[    0.254711] thermal_sys: Registered thermal governor 'user_space'
[    0.254802] cpuidle: using governor ladder
[    0.254808] cpuidle: using governor menu
[    0.254822] node 0 link 0: io port [b000, ffff]
[    0.254826] TOM: 00000000e0000000 aka 3584M
[    0.254828] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
[    0.254831] node 0 link 0: mmio [a0000, bffff]
[    0.254835] node 0 link 0: mmio [e0000000, efffffff]
[    0.254838] node 0 link 0: mmio [f4000000, fe02ffff]
[    0.254841] node 0 link 0: mmio [f0000000, f04fffff] ==> [f0100000, f04fffff]
[    0.254845] TOM2: 0000000120000000 aka 4608M
[    0.254847] bus: [bus 00-04] on node 0 link 0
[    0.254849] bus: 00 [io  0x0000-0xffff]
[    0.254851] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.254852] bus: 00 [mem 0xe0000000-0xefffffff]
[    0.254854] bus: 00 [mem 0xf0500000-0xffffffff]
[    0.254855] bus: 00 [mem 0xf0100000-0xf04fffff]
[    0.254856] bus: 00 [mem 0x120000000-0xfcffffffff]
[    0.254875] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.254875] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.254875] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.254875] PCI: Using configuration type 1 for base access
[    0.255218] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.255219] mtrr: probably your BIOS does not setup all CPUs.
[    0.255220] mtrr: corrected configuration.
[    0.256849] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.280464] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.280464] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.280464] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.280464] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.297170] raid6: sse2x4   gen()  7391 MB/s
[    0.314167] raid6: sse2x2   gen()  7035 MB/s
[    0.331171] raid6: sse2x1   gen()  5750 MB/s
[    0.331173] raid6: using algorithm sse2x4 gen() 7391 MB/s
[    0.348169] raid6: .... xor() 1549 MB/s, rmw enabled
[    0.348171] raid6: using intx1 recovery algorithm
[    0.348253] ACPI: Added _OSI(Module Device)
[    0.348255] ACPI: Added _OSI(Processor Device)
[    0.348256] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.348257] ACPI: Added _OSI(Processor Aggregator Device)
[    0.348259] ACPI: Added _OSI(Linux-Dell-Video)
[    0.348261] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.348262] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.351915] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.352125] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.CPU0 (20220331/dspkginit-438)
[    0.354705] ACPI: Interpreter enabled
[    0.354737] ACPI: PM: (supports S0 S1 S3 S4 S5)
[    0.354740] ACPI: Using IOAPIC for interrupt routing
[    0.354783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.354785] PCI: Using E820 reservations for host bridge windows
[    0.355013] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.361020] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [ASSM] at bit offset/length 524288/32 exceeds size of target Buffer (880 bits) (20220331/dsopcode-198)
[    0.361035] ACPI Error: Aborting method \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
[    0.361046] ACPI Error: Method execution failed \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/uteval-68)
[    0.361443] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.361452] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.361460] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
[    0.361462] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
[    0.361464] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    0.361478] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.361859] PCI host bridge to bus 0000:00
[    0.361861] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.361864] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.361867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.361869] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
[    0.361872] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.361909] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.362127] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.362259] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.362268] pci 0000:00:01.1: reg 0x10: [io  0xff00-0xff3f]
[    0.362283] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.362288] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
[    0.362316] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.362394] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.362470] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.362479] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.362515] pci 0000:00:02.0: supports D1 D2
[    0.362517] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.362594] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.362603] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.362643] pci 0000:00:02.1: supports D1 D2
[    0.362644] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.362731] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.362845] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.362852] pci 0000:00:08.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.362856] pci 0000:00:08.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.362860] pci 0000:00:08.0: reg 0x18: [io  0x0970-0x0977]
[    0.362864] pci 0000:00:08.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.362868] pci 0000:00:08.0: reg 0x20: [io  0xf700-0xf70f]
[    0.362873] pci 0000:00:08.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
[    0.362963] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.362970] pci 0000:00:08.1: reg 0x10: [io  0x09e0-0x09e7]
[    0.362974] pci 0000:00:08.1: reg 0x14: [io  0x0be0-0x0be3]
[    0.362978] pci 0000:00:08.1: reg 0x18: [io  0x0960-0x0967]
[    0.362982] pci 0000:00:08.1: reg 0x1c: [io  0x0b60-0x0b63]
[    0.362986] pci 0000:00:08.1: reg 0x20: [io  0xf200-0xf20f]
[    0.362990] pci 0000:00:08.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[    0.363097] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.363129] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.363216] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.363248] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.363332] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.363364] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.363448] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.363499] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.363546] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.363593] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.363643] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.363706] pci_bus 0000:01: extended config space not accessible
[    0.363736] pci 0000:01:0a.0: [1102:0002] type 00 class 0x040100
[    0.363749] pci 0000:01:0a.0: reg 0x10: [io  0xec00-0xec1f]
[    0.363802] pci 0000:01:0a.0: supports D1 D2
[    0.363847] pci 0000:01:0a.1: [1102:7002] type 00 class 0x098000
[    0.363859] pci 0000:01:0a.1: reg 0x10: [io  0xe800-0xe807]
[    0.363911] pci 0000:01:0a.1: supports D1 D2
[    0.363976] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.363979] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.363982] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.363985] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
[    0.363988] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.363990] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.363992] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    0.363995] pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xfebfffff window] (subtractive decode)
[    0.364026] pci 0000:02:00.0: [1002:68f9] type 00 class 0x030000
[    0.364038] pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.364046] pci 0000:02:00.0: reg 0x18: [mem 0xfdcc0000-0xfdcdffff 64bit]
[    0.364052] pci 0000:02:00.0: reg 0x20: [io  0xdc00-0xdcff]
[    0.364062] pci 0000:02:00.0: reg 0x30: [mem 0xfdca0000-0xfdcbffff pref]
[    0.364067] pci 0000:02:00.0: enabling Extended Tags
[    0.364081] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.364104] pci 0000:02:00.0: supports D1 D2
[    0.364171] pci 0000:02:00.1: [1002:aa68] type 00 class 0x040300
[    0.364183] pci 0000:02:00.1: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[    0.364207] pci 0000:02:00.1: enabling Extended Tags
[    0.364238] pci 0000:02:00.1: supports D1 D2
[    0.364295] pci 0000:00:09.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[    0.367185] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.367188] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.367191] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.367194] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.367221] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.367224] pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
[    0.367227] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.367230] pci 0000:00:0b.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.367264] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.367278] pci 0000:04:00.0: reg 0x10: [io  0xbc00-0xbcff]
[    0.367295] pci 0000:04:00.0: reg 0x18: [mem 0xfd9ff000-0xfd9fffff 64bit]
[    0.367306] pci 0000:04:00.0: reg 0x20: [mem 0xfd8fc000-0xfd8fffff 64bit pref]
[    0.367369] pci 0000:04:00.0: supports D1 D2
[    0.367371] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.367465] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.367468] pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
[    0.367471] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.367474] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.367900] ACPI: PCI: Interrupt link LNK1 configured for IRQ 0
[    0.367902] ACPI: PCI: Interrupt link LNK1 disabled
[    0.367956] ACPI: PCI: Interrupt link LNK2 configured for IRQ 0
[    0.367957] ACPI: PCI: Interrupt link LNK2 disabled
[    0.368008] ACPI: PCI: Interrupt link LNK3 configured for IRQ 10
[    0.368057] ACPI: PCI: Interrupt link LNK4 configured for IRQ 0
[    0.368060] ACPI: PCI: Interrupt link LNK4 disabled
[    0.368109] ACPI: PCI: Interrupt link LNK5 configured for IRQ 7
[    0.368168] ACPI: PCI: Interrupt link LNK6 configured for IRQ 0
[    0.368170] ACPI: PCI: Interrupt link LNK6 disabled
[    0.368217] ACPI: PCI: Interrupt link LNK7 configured for IRQ 0
[    0.368220] ACPI: PCI: Interrupt link LNK7 disabled
[    0.368267] ACPI: PCI: Interrupt link LNK8 configured for IRQ 11
[    0.368315] ACPI: PCI: Interrupt link LIGP configured for IRQ 0
[    0.368318] ACPI: PCI: Interrupt link LIGP disabled
[    0.368366] ACPI: PCI: Interrupt link LP2P configured for IRQ 0
[    0.368368] ACPI: PCI: Interrupt link LP2P disabled
[    0.368417] ACPI: PCI: Interrupt link LUBA configured for IRQ 11
[    0.368465] ACPI: PCI: Interrupt link LMAC configured for IRQ 0
[    0.368468] ACPI: PCI: Interrupt link LMAC disabled
[    0.368516] ACPI: PCI: Interrupt link LAZA configured for IRQ 0
[    0.368518] ACPI: PCI: Interrupt link LAZA disabled
[    0.368566] ACPI: PCI: Interrupt link LPMU configured for IRQ 0
[    0.368568] ACPI: PCI: Interrupt link LPMU disabled
[    0.368615] ACPI: PCI: Interrupt link LSMB configured for IRQ 10
[    0.368664] ACPI: PCI: Interrupt link LUB2 configured for IRQ 7
[    0.368713] ACPI: PCI: Interrupt link LIDE configured for IRQ 0
[    0.368715] ACPI: PCI: Interrupt link LIDE disabled
[    0.368763] ACPI: PCI: Interrupt link LSID configured for IRQ 11
[    0.368813] ACPI: PCI: Interrupt link LFID configured for IRQ 10
[    0.368898] ACPI: PCI: Interrupt link APC1 configured for IRQ 0
[    0.368901] ACPI: PCI: Interrupt link APC1 disabled
[    0.368981] ACPI: PCI: Interrupt link APC2 configured for IRQ 0
[    0.368983] ACPI: PCI: Interrupt link APC2 disabled
[    0.369061] ACPI: PCI: Interrupt link APC3 configured for IRQ 0
[    0.369063] ACPI: PCI: Interrupt link APC3 disabled
[    0.369138] ACPI: PCI: Interrupt link APC4 configured for IRQ 0
[    0.369140] ACPI: PCI: Interrupt link APC4 disabled
[    0.369222] ACPI: PCI: Interrupt link APC5 configured for IRQ 0
[    0.369224] ACPI: PCI: Interrupt link APC5 disabled
[    0.369299] ACPI: PCI: Interrupt link APC6 configured for IRQ 0
[    0.369302] ACPI: PCI: Interrupt link APC6 disabled
[    0.369377] ACPI: PCI: Interrupt link APC7 configured for IRQ 0
[    0.369379] ACPI: PCI: Interrupt link APC7 disabled
[    0.369456] ACPI: PCI: Interrupt link APC8 configured for IRQ 0
[    0.369459] ACPI: PCI: Interrupt link APC8 disabled
[    0.369535] ACPI: PCI: Interrupt link AIGP configured for IRQ 0
[    0.369538] ACPI: PCI: Interrupt link AIGP disabled
[    0.369615] ACPI: PCI: Interrupt link APCF configured for IRQ 0
[    0.369617] ACPI: PCI: Interrupt link APCF disabled
[    0.369695] ACPI: PCI: Interrupt link APCH configured for IRQ 0
[    0.369698] ACPI: PCI: Interrupt link APCH disabled
[    0.369779] ACPI: PCI: Interrupt link APMU configured for IRQ 0
[    0.369782] ACPI: PCI: Interrupt link APMU disabled
[    0.369859] ACPI: PCI: Interrupt link AAZA configured for IRQ 0
[    0.369862] ACPI: PCI: Interrupt link AAZA disabled
[    0.369938] ACPI: PCI: Interrupt link APCS configured for IRQ 0
[    0.369941] ACPI: PCI: Interrupt link APCS disabled
[    0.370017] ACPI: PCI: Interrupt link APCL configured for IRQ 0
[    0.370020] ACPI: PCI: Interrupt link APCL disabled
[    0.370096] ACPI: PCI: Interrupt link APCM configured for IRQ 0
[    0.370099] ACPI: PCI: Interrupt link APCM disabled
[    0.370180] ACPI: PCI: Interrupt link APCZ configured for IRQ 0
[    0.370182] ACPI: PCI: Interrupt link APCZ disabled
[    0.370259] ACPI: PCI: Interrupt link APSI configured for IRQ 0
[    0.370262] ACPI: PCI: Interrupt link APSI disabled
[    0.370339] ACPI: PCI: Interrupt link APSJ configured for IRQ 0
[    0.370342] ACPI: PCI: Interrupt link APSJ disabled
[    0.370516] iommu: Default domain type: Translated 
[    0.370517] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.370732] SCSI subsystem initialized
[    0.370744] libata version 3.00 loaded.
[    0.370744] EDAC MC: Ver: 3.0.0
[    0.371326] NetLabel: Initializing
[    0.371327] NetLabel:  domain hash size = 128
[    0.371329] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.371345] NetLabel:  unlabeled traffic allowed by default
[    0.371346] mctp: management component transport protocol core
[    0.371347] NET: Registered PF_MCTP protocol family
[    0.371353] PCI: Using ACPI for IRQ routing
[    0.372787] PCI: pci_cache_line_size set to 64 bytes
[    0.372822] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.372824] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
[    0.372841] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.372841] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.372841] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.372841] vgaarb: loaded
[    0.372841] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.372841] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.372841] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.374224] clocksource: Switched to clocksource tsc-early
[    0.374419] VFS: Disk quotas dquot_6.6.0
[    0.374440] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.374518] pnp: PnP ACPI init
[    0.374667] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.374672] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.374674] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.374676] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.374678] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.374681] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.374721] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.374724] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.374726] system 00:01: [io  0x0294-0x0297] has been reserved
[    0.375457] system 00:03: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.375480] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [ASSM] at bit offset/length 524288/32 exceeds size of target Buffer (880 bits) (20220331/dsopcode-198)
[    0.375494] ACPI Error: Aborting method \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/psparse-529)
[    0.375504] ACPI Error: Method execution failed \_SB.MEM._CRS due to previous error (AE_AML_BUFFER_LIMIT) (20220331/uteval-68)
[    0.375513] pnp 00:04: can't evaluate _CRS: 12298
[    0.375553] pnp: PnP ACPI: found 5 devices
[    0.381830] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.381939] NET: Registered PF_INET protocol family
[    0.382250] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.383364] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.383382] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.383392] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.383498] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.383713] TCP: Hash tables configured (established 32768 bind 32768)
[    0.383857] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.383891] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.383990] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.384008] NET: Registered PF_XDP protocol family
[    0.384031] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.384037] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.384042] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.384045] pci 0000:00:04.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
[    0.384051] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.384053] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.384056] pci 0000:00:09.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.384058] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.384062] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.384064] pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
[    0.384066] pci 0000:00:0b.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.384068] pci 0000:00:0b.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.384073] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.384074] pci 0000:00:0c.0:   bridge window [io  0xb000-0xbfff]
[    0.384077] pci 0000:00:0c.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.384079] pci 0000:00:0c.0:   bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.384087] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.384089] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.384091] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.384093] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff window]
[    0.384096] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.384098] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.384100] pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[    0.384102] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.384104] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.384106] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.384108] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xfebfffff window]
[    0.384110] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.384112] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.384114] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.384117] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.384119] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.384121] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.384123] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.384125] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.384127] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[    0.384500] ACPI: \_SB_.PCI0.APCF: Enabled at IRQ 23
[    0.384826] ACPI: \_SB_.PCI0.APCL: Enabled at IRQ 22
[    0.384949] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.384991] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.385031] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.385075] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.385120] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.385168] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.385231] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
[    0.385238] PCI: CLS 32 bytes, default 64
[    0.385313] Trying to unpack rootfs image as initramfs...
[    0.394767] PCI-DMA: Disabling AGP.
[    0.394853] PCI-DMA: aperture base @ d8000000 size 65536 KB
[    0.394856] PCI-DMA: using GART IOMMU.
[    0.394859] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.395146] software IO TLB: tearing down default memory pool
[    0.397479] LVT offset 1 assigned for vector 0x400
[    0.397493] LVT offset 1 assigned
[    0.397788] perf: AMD IBS detected (0x00000007)
[    0.398220] Initialise system trusted keyrings
[    0.398305] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.400688] zbud: loaded
[    0.413010] xor: measuring software checksum speed
[    0.413764]    prefetch64-sse  : 13234 MB/sec
[    0.414601]    generic_sse     : 11820 MB/sec
[    0.414603] xor: using function: prefetch64-sse (13234 MB/sec)
[    0.414610] Key type asymmetric registered
[    0.414612] Asymmetric key parser 'x509' registered
[    0.414634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.414718] io scheduler mq-deadline registered
[    0.414720] io scheduler kyber registered
[    0.414768] io scheduler bfq registered
[    0.416060] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.416518] Linux agpgart interface v0.103
[    0.419092] brd: module loaded
[    0.419620] i8042: PNP: No PS/2 controller found.
[    0.419678] mousedev: PS/2 mouse device common for all mice
[    0.419730] rtc_cmos 00:02: RTC can wake from S4
[    0.420051] rtc_cmos 00:02: registered as rtc0
[    0.420095] rtc_cmos 00:02: setting system clock to 2022-10-27T12:16:10 UTC (1666872970)
[    0.420124] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.420247] ledtrig-cpu: registered to indicate activity on CPUs
[    0.420280] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[    0.420283] vesafb: scrolling: redraw
[    0.420284] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.420299] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 16384k
[    0.420418] Console: switching to colour frame buffer device 128x48
[    0.425258] fb0: VESA VGA frame buffer device
[    0.425497] Key type dns_resolver registered
[    0.425499] mpls_gso: MPLS GSO support
[    0.425746] microcode: CPU0: patch_level=0x01000095
[    0.425756] microcode: CPU1: patch_level=0x01000095
[    0.425761] microcode: Microcode Update Driver: v2.2.
[    0.425765] IPI shorthand broadcast: enabled
[    0.425789] sched_clock: Marking stable (425407224, 293323)->(442962638, -17262091)
[    0.425934] registered taskstats version 1
[    0.425943] Loading compiled-in X.509 certificates
[    0.426077] zswap: loaded using pool lzo/zbud
[    0.426217] Key type ._fscrypt registered
[    0.426219] Key type .fscrypt registered
[    0.426220] Key type fscrypt-provisioning registered
[    0.426749] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.933940] Freeing initrd memory: 35612K
[    0.937732] Key type encrypted registered
[    0.939419] PM:   Magic number: 10:47:280
[    0.939458] tty tty17: hash matches
[    0.939577] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    0.941477] Freeing unused kernel image (initmem) memory: 1992K
[    0.943237] Write protecting the kernel read-only data: 22528k
[    0.944229] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.944767] Freeing unused kernel image (rodata/data gap) memory: 1320K
[    0.993009] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.993019] Run /init as init process
[    0.993021]   with arguments:
[    0.993022]     /init
[    0.993024]     splash
[    0.993025]     noiswmd
[    0.993026]   with environment:
[    0.993027]     HOME=/
[    0.993028]     TERM=linux
[    0.993029]     BOOT_IMAGE=/boot/vmlinuz-6.0.3-desktop-2.mga9
[    0.993030]     vga=791
[    1.054487] dracut: Mageia-9
[    1.288412] ACPI: bus type drm_connector registered
[    1.467327] tsc: Refined TSC clocksource calibration: 2511.421 MHz
[    1.467340] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24335ebd627, max_idle_ns: 440795266246 ns
[    1.467362] clocksource: Switched to clocksource tsc
[    1.468045] [drm] radeon kernel modesetting enabled.
[    1.468266] Console: switching to colour dummy device 80x25
[    1.468299] radeon 0000:02:00.0: vgaarb: deactivate vga console
[    1.468625] ACPI: \_SB_.PCI0.APC8: Enabled at IRQ 16
[    1.468788] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1545:0x5450 0x00).
[    1.468825] radeon 0000:02:00.0: No more image in the PCI ROM
[    1.469534] ATOM BIOS: CEDAR
[    1.469583] radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.469586] radeon 0000:02:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[    1.469591] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.469593] [drm] RAM width 64bits DDR
[    1.469626] [drm] radeon: 2048M of VRAM memory ready
[    1.469628] [drm] radeon: 1024M of GTT memory ready.
[    1.469634] [drm] Loading CEDAR Microcode
[    1.469736] [drm] Internal thermal controller with fan control
[    1.492022] [drm] radeon: dpm initialized
[    1.492119] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.512879] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    1.512969] radeon 0000:02:00.0: WB enabled
[    1.512973] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[    1.512976] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[    1.513350] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
[    1.513743] radeon 0000:02:00.0: radeon: MSI limited to 32-bit
[    1.513797] radeon 0000:02:00.0: radeon: using MSI.
[    1.513824] [drm] radeon: irq initialized.
[    1.529961] [drm] ring test on 0 succeeded in 1 usecs
[    1.529967] [drm] ring test on 3 succeeded in 2 usecs
[    1.717133] [drm] ring test on 5 succeeded in 1 usecs
[    1.717138] [drm] UVD initialized successfully.
[    1.717206] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.717237] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.391187] [drm] ib test on ring 5 succeeded
[    2.391628] [drm] Radeon Display Connectors
[    2.391629] [drm] Connector 0:
[    2.391630] [drm]   HDMI-A-1
[    2.391631] [drm]   HPD2
[    2.391632] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.391635] [drm]   Encoders:
[    2.391636] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.391637] [drm] Connector 1:
[    2.391638] [drm]   DVI-D-1
[    2.391639] [drm]   HPD4
[    2.391640] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.391642] [drm]   Encoders:
[    2.391643] [drm]     DFP2: INTERNAL_UNIPHY
[    2.391644] [drm] Connector 2:
[    2.391645] [drm]   VGA-1
[    2.391646] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.391648] [drm]   Encoders:
[    2.391649] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.474844] [drm] fb mappable at 0xE034D000
[    2.474847] [drm] vram apper at 0xE0000000
[    2.474848] [drm] size 8294400
[    2.474849] [drm] fb depth is 24
[    2.474850] [drm]    pitch is 7680
[    2.474915] fbcon: radeondrmfb (fb0) is primary device
[    2.483418] Console: switching to colour frame buffer device 240x67
[    2.487135] radeon 0000:02:00.0: [drm] fb0: radeondrmfb frame buffer device
[    2.492224] [drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 0
[    2.497597] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    4.868873] [drm] amdgpu kernel modesetting enabled.
[    4.868998] amdgpu: CRAT table not found
[    4.869002] amdgpu: Virtual CRAT table created for CPU
[    4.869021] amdgpu: Topology: Add CPU node
[    4.879541] dracut: Starting plymouth daemon
[    5.718126] sata_nv 0000:00:08.0: version 3.5
[    5.718408] ACPI: \_SB_.PCI0.APSI: Enabled at IRQ 20
[    5.727976] scsi host0: sata_nv
[    5.740236] scsi host1: sata_nv
[    5.740306] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 20
[    5.740309] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 20
[    5.740661] ACPI: \_SB_.PCI0.APSJ: Enabled at IRQ 21
[    5.747242] scsi host2: sata_nv
[    5.755238] scsi host3: sata_nv
[    5.755304] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 21
[    5.755308] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 21
[    5.786244] ACPI: bus type USB registered
[    5.786288] usbcore: registered new interface driver usbfs
[    5.786303] usbcore: registered new interface driver hub
[    5.786323] usbcore: registered new device driver usb
[    6.070590] ata3: SATA link down (SStatus 0 SControl 300)
[    6.199199] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.218280] ata1.00: ATA-11: WD Blue SA510 2.5 500GB, 52008100, max UDMA/133
[    6.218284] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    6.231569] ata1.00: Features: Dev-Sleep
[    6.263586] ata1.00: configured for UDMA/133
[    6.263764] scsi 0:0:0:0: Direct-Access     ATA      WD Blue SA510 2. 8100 PQ: 0 ANSI: 5
[    6.264237] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    6.264249] sd 0:0:0:0: [sda] Write Protect is off
[    6.264252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.264283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.264321] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    6.265643]  sda: sda1 sda2 < sda5 sda6 >
[    6.265853] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.727202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.729476] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, 4403, max UDMA/33
[    6.733913] ata2.00: configured for UDMA/33
[    6.734826] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653Z  4403 PQ: 0 ANSI: 5
[    7.070531] ata4: SATA link down (SStatus 0 SControl 300)
[    7.078694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.086938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.086945] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    7.087734] ehci-pci: EHCI PCI platform driver
[    7.087939] ehci-pci 0000:00:02.1: EHCI Host Controller
[    7.087954] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    7.087965] ehci-pci 0000:00:02.1: debug port 1
[    7.088030] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    7.094186] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    7.094292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[    7.094295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.094298] usb usb1: Product: EHCI Host Controller
[    7.094301] usb usb1: Manufacturer: Linux 6.0.3-desktop-2.mga9 ehci_hcd
[    7.094302] usb usb1: SerialNumber: 0000:00:02.1
[    7.094496] hub 1-0:1.0: USB hub found
[    7.094505] hub 1-0:1.0: 10 ports detected
[    7.096738] ohci-pci: OHCI PCI platform driver
[    7.096937] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    7.096951] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    7.097008] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[    7.108394] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.108401] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.125707] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.150246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.00
[    7.150253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.150256] usb usb2: Product: OHCI PCI host controller
[    7.150258] usb usb2: Manufacturer: Linux 6.0.3-desktop-2.mga9 ohci_hcd
[    7.150260] usb usb2: SerialNumber: 0000:00:02.0
[    7.150516] hub 2-0:1.0: USB hub found
[    7.150562] hub 2-0:1.0: 10 ports detected
[    7.322005] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[    7.338182] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    7.350577] EXT4-fs (sda1): unmounting filesystem.
[    7.360524] dracut: Checking ext4: /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60
[    7.360708] dracut: issuing e2fsck -a /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60
[    7.369210] dracut: /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60: clean, 196514/3301376 files, 2036290/13183084 blocks
[    7.371560] dracut: Mounting /dev/disk/by-uuid/898dd7ee-751f-4d3e-a04f-b80ba4a17d60 with -o rw,relatime,ro
[    7.397358] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[    7.425622] dracut: Mounted root filesystem /dev/sda1
[    7.468803] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    7.468813] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.468815] usb 1-1: Product: USB 2.0 Hub
[    7.469091] hub 1-1:1.0: USB hub found
[    7.471193] hub 1-1:1.0: 4 ports detected
[    7.513947] dracut: Switching root
[    7.585184] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    7.628341] systemd[1]: Inserted module 'autofs4'
[    7.685747] NET: Registered PF_INET6 protocol family
[    7.686265] Segment Routing with IPv6
[    7.686279] In-situ OAM (IOAM) with IPv6
[    7.707910] systemd[1]: systemd 251 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE -TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    7.707919] systemd[1]: Detected architecture x86-64.
[    7.708566] systemd[1]: Hostname set to <localhost>.
[    7.716049] usb 1-2: New USB device found, idVendor=03f0, idProduct=e511, bcdDevice= 1.00
[    7.716059] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.716062] usb 1-2: Product: OfficeJet 3830 series
[    7.716065] usb 1-2: Manufacturer: HP
[    7.716066] usb 1-2: SerialNumber: CN94B7Q5H206VZ
[    7.896180] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[    7.950302] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network-up' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.950655] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/resolvconf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.951022] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/numlock' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.951098] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/msec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.951134] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.953929] systemd-sysv-generator[521]: SysV service '/etc/rc.d/init.d/network-auth' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    8.094432] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    8.094442] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    8.094445] usb 1-1.1: Product: USB2.0 Hub
[    8.094900] hub 1-1.1:1.0: USB hub found
[    8.095179] hub 1-1.1:1.0: 4 ports detected
[    8.149074] systemd[1]: Queued start job for default target Graphical Interface.
[    8.159830] systemd[1]: Created slice Slice /system/getty.
[    8.160404] systemd[1]: Created slice Slice /system/modprobe.
[    8.160812] systemd[1]: Created slice Slice /system/systemd-fsck.
[    8.161077] systemd[1]: Created slice User and Session Slice.
[    8.161194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.161402] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.161475] systemd[1]: Reached target Login Prompts.
[    8.161499] systemd[1]: Reached target Local Integrity Protected Volumes.
[    8.161559] systemd[1]: Reached target Remote File Systems.
[    8.161580] systemd[1]: Reached target RPC Port Mapper.
[    8.161608] systemd[1]: Reached target Slice Units.
[    8.161662] systemd[1]: Reached target Local Verity Protected Volumes.
[    8.161776] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.164041] systemd[1]: Listening on Process Core Dump Socket.
[    8.164127] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.168047] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
[    8.168326] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.168479] systemd[1]: Listening on Journal Socket.
[    8.170556] systemd[1]: Listening on udev Control Socket.
[    8.170687] systemd[1]: Listening on udev Kernel Socket.
[    8.172013] systemd[1]: Mounting Huge Pages File System...
[    8.173252] systemd[1]: Mounting POSIX Message Queue File System...
[    8.174522] systemd[1]: Mounting Kernel Debug File System...
[    8.176352] systemd[1]: Mounting Kernel Trace File System...
[    8.181327] systemd[1]: Starting Create List of Static Device Nodes...
[    8.183614] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.185029] systemd[1]: Starting Software RAID Monitor Takeover...
[    8.186511] systemd[1]: Starting Load Kernel Module configfs...
[    8.192782] systemd[1]: Starting Load Kernel Module drm...
[    8.194335] systemd[1]: Starting Load Kernel Module fuse...
[    8.199926] systemd[1]: Starting File System Check on Root Device...
[    8.204353] systemd[1]: Starting Journal Service...
[    8.223828] systemd[1]: Starting Load Kernel Modules...
[    8.223979] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[    8.226098] fuse: init (API version 7.36)
[    8.230157] systemd[1]: Starting Coldplug All udev Devices...
[    8.234610] systemd[1]: Mounted Huge Pages File System.
[    8.234921] systemd[1]: Mounted POSIX Message Queue File System.
[    8.235137] systemd[1]: Mounted Kernel Debug File System.
[    8.235372] systemd[1]: Mounted Kernel Trace File System.
[    8.235768] systemd[1]: Finished Create List of Static Device Nodes.
[    8.240006] systemd[1]: Started Software RAID Monitor Takeover.
[    8.240497] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    8.240684] systemd[1]: Finished Load Kernel Module configfs.
[    8.240957] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    8.241109] systemd[1]: Finished Load Kernel Module drm.
[    8.241389] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    8.241537] systemd[1]: Finished Load Kernel Module fuse.
[    8.241769] systemd[1]: Finished Load Kernel Modules.
[    8.246434] systemd[1]: Mounting FUSE Control File System...
[    8.248006] systemd[1]: Mounting Kernel Configuration File System...
[    8.251544] systemd[1]: Starting Apply Kernel Variables...
[    8.258240] systemd[1]: Finished File System Check on Root Device.
[    8.281611] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.283489] systemd[1]: Mounted FUSE Control File System.
[    8.287959] systemd[1]: Mounted Kernel Configuration File System.
[    8.311672] systemd[1]: Finished Apply Kernel Variables.
[    8.318383] EXT4-fs (sda1): re-mounted. Quota mode: none.
[    8.320511] systemd[1]: Finished Remount Root and Kernel File Systems.
[    8.320820] systemd[1]: OSTree Remount OS/ Bind Mounts was skipped because of a failed condition check (ConditionKernelCommandLine=ostree).
[    8.320894] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes).
[    8.326665] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    8.330401] systemd[1]: Starting Load/Save Random Seed...
[    8.330518] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
[    8.331956] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.337295] systemd[1]: Starting Setup Virtual Console...
[    8.400076] systemd[1]: Finished Create Static Device Nodes in /dev.
[    8.406370] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    8.420570] systemd[1]: Finished Coldplug All udev Devices.
[    8.424419] systemd[1]: Starting Wait for udev To Complete Device Initialization...
[    8.460943] systemd[1]: Finished Setup Virtual Console.
[    8.466958] systemd[1]: Started Journal Service.
[    8.483064] systemd-journald[536]: Received client request to flush runtime journal.
[    8.483191] usb 2-4: new full-speed USB device number 2 using ohci-pci
[    8.499175] random: crng init done
[    8.701213] usb 2-4: New USB device found, idVendor=258a, idProduct=0016, bcdDevice= 0.01
[    8.701223] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.701226] usb 2-4: Product: Usb Gaming Keyboard
[    8.701228] usb 2-4: Manufacturer: BY Tech
[    8.925475] i2c i2c-8: nForce2 SMBus adapter at 0x1c00
[    8.925506] i2c i2c-9: nForce2 SMBus adapter at 0x1c40
[    8.930921] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.952309] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    8.952355] ACPI: button: Power Button [PWRB]
[    8.952454] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    8.956237] ACPI: button: Power Button [PWRF]
[    8.966143] ACPI: \_TZ_.THRM: Invalid passive threshold
[    8.966562] thermal LNXTHERM:00: registered as thermal_zone0
[    8.966565] ACPI: thermal: Thermal Zone [THRM] (40 C)
[    8.992194] gameport gameport0: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xe800, speed 1128kHz
[    9.088415] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.151188] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[    9.239546] Adding 4191344k swap on /dev/sda5.  Priority:-2 extents:1 across:4191344k SSFS
[    9.288592] ACPI: \_SB_.PCI0.APC5: Enabled at IRQ 16
[    9.288633] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.297051] r8169 0000:04:00.0 eth0: RTL8168e/8111e, 98:48:27:4f:2c:7a, XID 2c2, IRQ 25
[    9.297061] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    9.320750] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    9.349801] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    9.349810] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.349813] usb 1-1.4: Product: USB 2.0 Hub
[    9.350091] hub 1-1.4:1.0: USB hub found
[    9.351082] hub 1-1.4:1.0: 4 ports detected
[    9.355160] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card0/input2
[    9.396179] hid: raw HID events driver (C) Jiri Kosina
[    9.413209] usb 1-1.1.4: new full-speed USB device number 7 using ehci-pci
[    9.426757] usbcore: registered new interface driver usbhid
[    9.426762] usbhid: USB HID core driver
[    9.513680] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:258A:0016.0001/input/input3
[    9.515757] ACPI: \_SB_.PCI0.APC3: Enabled at IRQ 18
[    9.524924] usb 1-1.1.4: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13
[    9.524934] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.524937] usb 1-1.1.4: Product: 2.4G Keyboard Mouse
[    9.524939] usb 1-1.1.4: Manufacturer: MOSART Semi.
[    9.526469] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/0003:062A:4101.0003/input/input4
[    9.546707] kvm: support for 'kvm_amd' disabled by bios
[    9.567442] hid-generic 0003:258A:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:00:02.0-4/input0
[    9.568125] kvm: support for 'kvm_amd' disabled by bios
[    9.568674] input: BY Tech Usb Gaming Keyboard System Control as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input5
[    9.619319] hid-generic 0003:062A:4101.0003: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:02.1-1.1.4/input0
[    9.621482] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input10
[    9.671378] input: BY Tech Usb Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input6
[    9.671667] input: BY Tech Usb Gaming Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input8
[    9.671987] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input11
[    9.723298] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input12
[    9.723410] input: BY Tech Usb Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:258A:0016.0002/input/input9
[    9.723656] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/0003:062A:4101.0004/input/input13
[    9.723840] hid-generic 0003:258A:0016.0002: input,hiddev0,hidraw2: USB HID v1.10 Keyboard [BY Tech Usb Gaming Keyboard] on usb-0000:00:02.0-4/input1
[    9.723918] hid-generic 0003:062A:4101.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:02.1-1.1.4/input1
[    9.868188] usb 2-5: new full-speed USB device number 3 using ohci-pci
[   10.089203] usb 2-5: New USB device found, idVendor=0a5c, idProduct=21e8, bcdDevice= 1.12
[   10.089216] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.089222] usb 2-5: Product: BCM20702A0
[   10.089226] usb 2-5: Manufacturer: Broadcom Corp
[   10.089229] usb 2-5: SerialNumber: 001986001785
[   10.710445] usblp 1-2:1.1: usblp2: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xE511
[   10.710605] usbcore: registered new interface driver usblp
[   10.841052] Bluetooth: Core ver 2.22
[   10.841094] NET: Registered PF_BLUETOOTH protocol family
[   10.841097] Bluetooth: HCI device and connection manager initialized
[   10.841104] Bluetooth: HCI socket layer initialized
[   10.841107] Bluetooth: L2CAP socket layer initialized
[   10.841112] Bluetooth: SCO socket layer initialized
[   10.857577] usbcore: registered new interface driver btusb
[   10.972637] device-mapper: uevent: version 1.0.3
[   10.972750] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   10.981235] Bluetooth: hci0: BCM: chip id 63
[   10.984210] Bluetooth: hci0: BCM: features 0x07
[   11.002210] Bluetooth: hci0: BCM20702A
[   11.002217] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[   11.011791] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[   11.011801] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0a5c-21e8.hcd'
[   11.011804] Bluetooth: hci0: BCM: 'brcm/BCM-0a5c-21e8.hcd'
[   11.061273] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none.
[   12.677109] RTL8211DN Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[   12.942903] r8169 0000:04:00.0 enp4s0: Link is Down
[   13.217428] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.222447] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.691239] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.691264] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   17.582133] NET: Registered PF_PACKET protocol family
[   18.637748] usblp2: removed
[   18.881704] netfilter PSD loaded - (c) astaro AG
[   18.887574] IFWLOG: register target
[   19.189999] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4821 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
[   19.305015] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4826 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
[   19.505179] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4841 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
[   19.705113] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:08:00 SRC=10.0.0.47 DST=10.0.0.9 LEN=2582 TOS=0x00 PREC=0x00 TTL=64 ID=4843 PROTO=UDP SPT=3702 DPT=48119 LEN=2562 
[   19.790235] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
[   19.974204] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
[   20.174207] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562 
[   20.374255] net-fw DROP IN=enp4s0 OUT= MAC=98:48:27:4f:2c:7a:30:24:a9:58:e9:f3:86:dd SRC=fe80:0000:0000:0000:3224:a9ff:fe58:e9f3 DST=fe80:0000:0000:0000:9a48:27ff:fe4f:2c7a LEN=2602 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=3702 DPT=37504 LEN=2562

Actions: View

Attachments on bug 31032: 13453 | 13454