Attachment 1225 Details for Bug 3698 – dmesg as requested

dmesg as requested

dmesg.txt (text/plain), 38.95 KB, created by David Taylor on 2011-12-12 01:37:39 CET

(hide)

Description:

Filename:

MIME Type:

Creator: David Taylor

Created: 2011-12-12 01:37:39 CET

Size: 38.95 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.38.8-desktop-8.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Nov 4 00:27:44 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI present.
>DMI: HP-Pavilion GQ561AA-ABG a6260a/Berkeley, BIOS 5.08    08/16/2007
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-DFFFF write-protect
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [c00ff780] ff780
>initial memory mapped : 0 - 00c00000
>init_memory_mapping: 0000000000000000-00000000333fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0033000000 page 2M
> 0033000000 - 00333fe000 page 4k
>kernel direct mapping tables up to 333fe000 @ bfa000-c00000
>RAMDISK: 37c17000 - 37ff0000
>Allocated new RAMDISK: 33025000 - 333fddc6
>Move RAMDISK from 0000000037c17000 - 0000000037fefdc5 to 33025000 - 333fddc5
>ACPI: RSDP 000fc420 00014 (v00 HPQOEM)
>ACPI: RSDT 7ffb0000 00040 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: FACP 7ffb0200 00084 (v02 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: DSDT 7ffb0440 05608 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
>ACPI: FACS 7ffbe000 00040
>ACPI: APIC 7ffb0390 0006C (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: MCFG 7ffb0400 0003C (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: OEMB 7ffbe040 00071 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: HPET 7ffb5a50 00038 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: GSCI 7ffbe0c0 02024 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
>ACPI: SLIC 7ffc00f0 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
>ACPI: Local APIC address 0xfee00000
>1227MB HIGHMEM available.
>819MB LOWMEM available.
>  mapped low ram: 0 - 333fe000
>  low ram: 0 - 333fe000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000333fe
>  HighMem  0x000333fe -> 0x0007ffb0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ffb0
>On node 0 totalpages: 524095
>free_area_init_node: node 0, pgdat c069f180, node_mem_map f2024200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1608 pages used for memmap
>  Normal zone: 204214 pages, LIFO batch:31
>  HighMem zone: 2456 pages used for memmap
>  HighMem zone: 311834 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 12 pages/cpu @f1c00000 s27904 r0 d21248 u1048576
>pcpu-alloc: s27904 r0 d21248 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519999
>Kernel command line: BOOT_IMAGE=linux root=UUID=56e03296-e865-4618-9948-42ea94816960 nokmsboot resume=UUID=0804154b-954e-4f73-bd4c-f3f48d2580e3 splash=verbose vga=788
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Initializing CPU#0
>allocated 10483840 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000333fe:0007ffb0)
>Memory: 2057748k/2096832k available (3557k kernel code, 38632k reserved, 2238k data, 552k init, 1257160k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
>    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
>      .init : 0xc06a9000 - 0xc0733000   ( 552 kB)
>      .data : 0xc047977b - 0xc06a8fc0   (2238 kB)
>      .text : 0xc0100000 - 0xc047977b   (3557 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>	RCU-based detection of stalled CPUs is disabled.
>NR_IRQS:2304
>CPU 0 irqstacks, hard=f0c20000 soft=f0c22000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2393.970 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.94 BogoMIPS (lpj=2393970)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110112
>ftrace: allocating 15956 entries in 32 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>PEBS disabled due to CPU errata.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>CPU 1 irqstacks, hard=f0cb4000 soft=f0cb6000
>Booting Node   0, Processors  #1
>Initializing CPU#1
>CPU 2 irqstacks, hard=f0cc8000 soft=f0cca000
> #2
>Initializing CPU#2
>CPU 3 irqstacks, hard=f0cd4000 soft=f0cd6000
> #3 Ok.
>Initializing CPU#3
>Brought up 4 CPUs
>Total of 4 processors activated (19151.24 BogoMIPS).
>devtmpfs: initialized
>Time:  7:49:37  Date: 12/12/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
>pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
>pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
>pci 0000:00:1a.0: reg 20: [io  0xb080-0xb09f]
>pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
>pci 0000:00:1a.1: reg 20: [io  0xb400-0xb41f]
>pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
>pci 0000:00:1a.7: reg 10: [mem 0xf9eff400-0xf9eff7ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
>pci 0000:00:1b.0: reg 10: [mem 0xf9ef8000-0xf9efbfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
>pci 0000:00:1d.0: reg 20: [io  0xb480-0xb49f]
>pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
>pci 0000:00:1d.1: reg 20: [io  0xb800-0xb81f]
>pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
>pci 0000:00:1d.2: reg 20: [io  0xb880-0xb89f]
>pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
>pci 0000:00:1d.3: reg 20: [io  0xbc00-0xbc1f]
>pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
>pci 0000:00:1d.7: reg 10: [mem 0xf9eff800-0xf9effbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
>pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
>pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
>pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.2: reg 20: [io  0xff90-0xff9f]
>pci 0000:00:1f.2: reg 24: [io  0xffa0-0xffaf]
>pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
>pci 0000:00:1f.3: reg 10: [mem 0xf9effc00-0xf9effcff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
>pci 0000:00:1f.5: reg 10: [io  0xcc00-0xcc07]
>pci 0000:00:1f.5: reg 14: [io  0xc880-0xc883]
>pci 0000:00:1f.5: reg 18: [io  0xc800-0xc807]
>pci 0000:00:1f.5: reg 1c: [io  0xc480-0xc483]
>pci 0000:00:1f.5: reg 20: [io  0xc400-0xc40f]
>pci 0000:00:1f.5: reg 24: [io  0xc080-0xc08f]
>pci 0000:02:00.0: [10de:0422] type 0 class 0x000300
>pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
>pci 0000:02:00.0: reg 24: [io  0xec00-0xec7f]
>pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 02-02]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfebfffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: [10ec:8139] type 0 class 0x000200
>pci 0000:01:00.0: reg 10: [io  0xd800-0xd8ff]
>pci 0000:01:00.0: reg 14: [mem 0xf9ffec00-0xf9ffecff]
>pci 0000:01:00.0: reg 30: [mem 0xf9fe0000-0xf9feffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00
>pci 0000:01:05.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:05.0: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000007ffb0000 - 000000007fffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #3
>Switched to NOHz mode on CPU #2
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x80000000-0xdfffffff window]
>pnp 00:00: [mem 0xf0000000-0xffffffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed14000-0xfed19fff]
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [dma 4]
>pnp 00:02: [io  0x0000-0x000f]
>pnp 00:02: [io  0x0081-0x0083]
>pnp 00:02: [io  0x0087]
>pnp 00:02: [io  0x0089-0x008b]
>pnp 00:02: [io  0x008f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x0070-0x0071]
>pnp 00:03: [irq 8]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x00f0-0x00ff]
>pnp 00:05: [irq 13]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:06: [io  0x0010-0x001f]
>pnp 00:06: [io  0x0022-0x003f]
>pnp 00:06: [io  0x0044-0x005f]
>pnp 00:06: [io  0x0062-0x0063]
>pnp 00:06: [io  0x0065-0x006f]
>pnp 00:06: [io  0x0072-0x007f]
>pnp 00:06: [io  0x0080]
>pnp 00:06: [io  0x0084-0x0086]
>pnp 00:06: [io  0x0088]
>pnp 00:06: [io  0x008c-0x008e]
>pnp 00:06: [io  0x0090-0x009f]
>pnp 00:06: [io  0x00a2-0x00bf]
>pnp 00:06: [io  0x00e0-0x00ef]
>pnp 00:06: [io  0x04d0-0x04d1]
>pnp 00:06: [io  0x0800-0x087f]
>pnp 00:06: [io  0x0000-0xffffffff disabled]
>pnp 00:06: [io  0x0480-0x04bf]
>pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:06: [mem 0xfed20000-0xfed8ffff]
>system 00:06: [io  0x04d0-0x04d1] has been reserved
>system 00:06: [io  0x0800-0x087f] has been reserved
>system 00:06: [io  0x0480-0x04bf] has been reserved
>system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
>system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:07: [mem 0xfed00000-0xfed003ff]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:08: [mem 0xfec00000-0xfec00fff]
>pnp 00:08: [mem 0xfee00000-0xfee00fff]
>system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x0060]
>pnp 00:09: [io  0x0064]
>pnp 00:09: [irq 1]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0a: [irq 12]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>pnp 00:0b: [io  0x0000-0xffffffff disabled]
>pnp 00:0b: [io  0x0a00-0x0adf]
>system 00:0b: [io  0x0a00-0x0adf] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [mem 0xffb00000-0xffbfffff]
>pnp 00:0c: [mem 0xfff00000-0xffffffff]
>pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:0d: [mem 0xffc00000-0xffefffff]
>system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0xe0000000-0xefffffff]
>system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0f: [mem 0x00000000-0x0009ffff]
>pnp 00:0f: [mem 0x000c0000-0x000cffff]
>pnp 00:0f: [mem 0x000e0000-0x000fffff]
>pnp 00:0f: [mem 0x00100000-0x7fffffff]
>pnp 00:0f: [mem 0x00000000-0xffffffff disabled]
>system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
>system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>pci 0000:00:01.0: PCI bridge to [bus 02-02]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfebfffff]
>pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 01-01]
>pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1e.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfebfffff]
>pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
>pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:02:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 3940k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1323676177.425:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1571
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>vesafb: framebuffer at 0xfb000000, mapped to 0xf3c80000, using 1875k, total 14336k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:b2b0
>vesafb: pmi: set display start = c00cb313, set palette = c00cb36e
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>intel_idle: MWAIT substates: 0x20
>intel_idle: does not run on family 6 model 15
>ERST: Table is not found!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Checking hibernation image partition UUID=0804154b-954e-4f73-bd4c-f3f48d2580e3
>psmouse serio1: ID: 10 00 64
>Refined TSC clocksource calibration: 2393.976 MHz.
>Switching to clocksource tsc
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 7:466:824
>rtc_cmos 00:03: setting system clock to 2011-12-12 07:49:39 UTC (1323676179)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>Freeing unused kernel memory: 552k freed
>Write protecting the kernel text: 3560k
>Write protecting the kernel read-only data: 1636k
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9eff400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9eff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b080
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b400
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.1
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.2
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.3
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
>ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
>usb 2-5: new high speed USB device using ehci_hcd and address 2
>usb 2-5: New USB device found, idVendor=058f, idProduct=6377
>usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-5: Product: Mass Storage Device
>usb 2-5: Manufacturer: Generic
>usb 2-5: SerialNumber: 920321111113
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>usb 2-8: new high speed USB device using ehci_hcd and address 4
>usb 2-8: New USB device found, idVendor=046d, idProduct=0802
>usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 2-8: SerialNumber: 4CCD4C60
>ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0714, max UDMA/33
>ata2.00: applying bridge limits
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata2.01: ATA-8: ST31000528AS, CC34, max UDMA/133
>ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/33
>usb 3-2: new full speed USB device using uhci_hcd and address 2
> sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2.01: configured for UDMA/133
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H653L 0714 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      ST31000528AS     CC34 PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:1:0: [sdb] Attached SCSI disk
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>usb 3-2: New USB device found, idVendor=04f9, idProduct=0028
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-2: Product: HL-2040 series
>usb 3-2: Manufacturer: Brother
>usb 3-2: SerialNumber: H6J475817
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: New USB device found, idVendor=04f9, idProduct=0253
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-1: Product: DCP-J125
>usb 4-1: Manufacturer: Brother
>usb 4-1: SerialNumber: BROH1F384514
>PM: Marking nosave pages: 000000000009f000 - 0000000000100000
>PM: Basic memory bitmaps created
>PM: Basic memory bitmaps freed
>usb 8-1: new low speed USB device using uhci_hcd and address 2
>usb 8-1: New USB device found, idVendor=0665, idProduct=5161
>usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 8-1: Product: USB to Serial
>usb 8-1: Manufacturer: Cypress Semiconductor
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
>Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
>udev[141]: starting version 166
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.3-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
>Initializing USB Mass Storage driver...
>scsi4 : usb-storage 2-5:1.0
>usblp2: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0253
>usbcore: registered new interface driver usblp
>scsi5 : usb-storage 4-1:1.2
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ACPI: acpi_idle registered with cpuidle
>usbcore: registered new interface driver uas
>firewire_ohci 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>8139too: 8139too Fast Ethernet driver 0.9.28
>firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>8139too 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>8139too 0000:01:00.0: eth0: RealTek RTL8139 at 0xf3e92c00, 00:e0:4c:0a:3e:d6, IRQ 17
>8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>Linux video capture interface: v2.00
>iTCO_vendor_support: vendor-support=0
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
>input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input4
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v1.0.0)
>firewire_core: created device fw0: GUID 0011d800016a2718, S400
>scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 4:0:0:1: Attached scsi generic sg4 type 0
>scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 4:0:0:2: Attached scsi generic sg5 type 0
>sd 4:0:0:0: [sdc] Attached SCSI removable disk
>scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 4:0:0:3: Attached scsi generic sg6 type 0
>sd 4:0:0:1: [sdd] Attached SCSI removable disk
>sd 4:0:0:2: [sde] Attached SCSI removable disk
>sd 4:0:0:3: [sdf] Attached SCSI removable disk
>scsi 5:0:0:0: Direct-Access     Brother  DCP-J125         1.00 PQ: 0 ANSI: 2
>sd 5:0:0:0: Attached scsi generic sg7 type 0
>sd 5:0:0:0: [sdg] Attached SCSI removable disk
>nvidia: module license 'NVIDIA' taints kernel.
>Disabling lock debugging due to kernel taint
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC1200: BIOS auto-probing.
>hda_codec: ALC1200: SKU not ready 0x411111f0
>autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x11/0x1e
>   inputs:
>   dig-in=0x1f
>realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
>realtek: Enable default setup for auto mode as fallback
>input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nvidia 0000:02:00.0: setting latency timer to 64
>vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
>NVRM: loading NVIDIA UNIX x86 Kernel Module  285.05.09  Fri Sep 23 18:53:08 PDT 2011
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
>EXT4-fs (sda5): re-mounted. Opts: acl
>EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: acl
>fuse init (API version 7.16)
>EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl
>EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
>EXT3-fs: barriers not enabled
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sdb1): using internal journal
>EXT3-fs (sdb1): mounted filesystem with ordered data mode
>loop: module loaded
>Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k 
>NET: Registered protocol family 10
>usbcore: registered new interface driver snd-usb-audio
>eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>NET: Registered protocol family 17
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
>ctnetlink v0.93: registering with nfnetlink.
>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
>eth0: no IPv6 routers present
>ip_set: protocol 6
>xt_time: kernel timezone is +1300
>u32 classifier
>    Actions configured
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/133
>ata2: EH complete
>EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda12): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda8): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda9): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda11): re-mounted. Opts: acl,commit=0
>EXT4-fs (sda10): re-mounted. Opts: acl,commit=0
>usb 3-2: USB disconnect, address 2
>usblp1: removed
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: New USB device found, idVendor=04f9, idProduct=0028
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-2: Product: HL-2040 series
>usb 3-2: Manufacturer: Brother
>usb 3-2: SerialNumber: H6J475817
>usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
>usb 3-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
>ppdev: user-space parallel port driver
>ppdev0: no associated port!
>usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
>usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
>usb 4-1: usbfs: process 30720 (xsane) did not claim interface 1 before use
>usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
>usb 4-1: usbfs: process 30720 (xsane) did not claim interface 1 before use
>sd 4:0:0:0: [sdc] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>sdc: detected capacity change from 0 to 1977614336
> sdc: sdc1
>WARNING! power/level is deprecated; use power/control instead
>usb 2-5: USB disconnect, address 2

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.8-desktop-8.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Fri Nov 4 00:27:44 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
 BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
 BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
 BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
DMI: HP-Pavilion GQ561AA-ABG a6260a/Berkeley, BIOS 5.08    08/16/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000333fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0033000000 page 2M
 0033000000 - 00333fe000 page 4k
kernel direct mapping tables up to 333fe000 @ bfa000-c00000
RAMDISK: 37c17000 - 37ff0000
Allocated new RAMDISK: 33025000 - 333fddc6
Move RAMDISK from 0000000037c17000 - 0000000037fefdc5 to 33025000 - 333fddc5
ACPI: RSDP 000fc420 00014 (v00 HPQOEM)
ACPI: RSDT 7ffb0000 00040 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: FACP 7ffb0200 00084 (v02 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: DSDT 7ffb0440 05608 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
ACPI: FACS 7ffbe000 00040
ACPI: APIC 7ffb0390 0006C (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: MCFG 7ffb0400 0003C (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: OEMB 7ffbe040 00071 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: HPET 7ffb5a50 00038 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: GSCI 7ffbe0c0 02024 (v01 HPQOEM SLIC-CPC 20070816 MSFT 00000097)
ACPI: SLIC 7ffc00f0 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: Local APIC address 0xfee00000
1227MB HIGHMEM available.
819MB LOWMEM available.
  mapped low ram: 0 - 333fe000
  low ram: 0 - 333fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000333fe
  HighMem  0x000333fe -> 0x0007ffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007ffb0
On node 0 totalpages: 524095
free_area_init_node: node 0, pgdat c069f180, node_mem_map f2024200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1608 pages used for memmap
  Normal zone: 204214 pages, LIFO batch:31
  HighMem zone: 2456 pages used for memmap
  HighMem zone: 311834 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f1c00000 s27904 r0 d21248 u1048576
pcpu-alloc: s27904 r0 d21248 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519999
Kernel command line: BOOT_IMAGE=linux root=UUID=56e03296-e865-4618-9948-42ea94816960 nokmsboot resume=UUID=0804154b-954e-4f73-bd4c-f3f48d2580e3 splash=verbose vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 10483840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000333fe:0007ffb0)
Memory: 2057748k/2096832k available (3557k kernel code, 38632k reserved, 2238k data, 552k init, 1257160k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf3bfe000 - 0xff3fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf33fe000   ( 819 MB)
      .init : 0xc06a9000 - 0xc0733000   ( 552 kB)
      .data : 0xc047977b - 0xc06a8fc0   (2238 kB)
      .text : 0xc0100000 - 0xc047977b   (3557 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f0c20000 soft=f0c22000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.970 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.94 BogoMIPS (lpj=2393970)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 15956 entries in 32 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
CPU 1 irqstacks, hard=f0cb4000 soft=f0cb6000
Booting Node   0, Processors  #1
Initializing CPU#1
CPU 2 irqstacks, hard=f0cc8000 soft=f0cca000
 #2
Initializing CPU#2
CPU 3 irqstacks, hard=f0cd4000 soft=f0cd6000
 #3 Ok.
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (19151.24 BogoMIPS).
devtmpfs: initialized
Time:  7:49:37  Date: 12/12/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io  0xb080-0xb09f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io  0xb400-0xb41f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xf9eff400-0xf9eff7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf9ef8000-0xf9efbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xb480-0xb49f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xb800-0xb81f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xb880-0xb89f]
pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xbc00-0xbc1f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf9eff800-0xf9effbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0xff90-0xff9f]
pci 0000:00:1f.2: reg 24: [io  0xffa0-0xffaf]
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf9effc00-0xf9effcff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io  0xcc00-0xcc07]
pci 0000:00:1f.5: reg 14: [io  0xc880-0xc883]
pci 0000:00:1f.5: reg 18: [io  0xc800-0xc807]
pci 0000:00:1f.5: reg 1c: [io  0xc480-0xc483]
pci 0000:00:1f.5: reg 20: [io  0xc400-0xc40f]
pci 0000:00:1f.5: reg 24: [io  0xc080-0xc08f]
pci 0000:02:00.0: [10de:0422] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 24: [io  0xec00-0xec7f]
pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfebfffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: [10ec:8139] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [io  0xd800-0xd8ff]
pci 0000:01:00.0: reg 14: [mem 0xf9ffec00-0xf9ffecff]
pci 0000:01:00.0: reg 30: [mem 0xf9fe0000-0xf9feffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00
pci 0000:01:05.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000007ffb0000 - 000000007fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x80000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0010-0x001f]
pnp 00:06: [io  0x0022-0x003f]
pnp 00:06: [io  0x0044-0x005f]
pnp 00:06: [io  0x0062-0x0063]
pnp 00:06: [io  0x0065-0x006f]
pnp 00:06: [io  0x0072-0x007f]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0084-0x0086]
pnp 00:06: [io  0x0088]
pnp 00:06: [io  0x008c-0x008e]
pnp 00:06: [io  0x0090-0x009f]
pnp 00:06: [io  0x00a2-0x00bf]
pnp 00:06: [io  0x00e0-0x00ef]
pnp 00:06: [io  0x04d0-0x04d1]
pnp 00:06: [io  0x0800-0x087f]
pnp 00:06: [io  0x0000-0xffffffff disabled]
pnp 00:06: [io  0x0480-0x04bf]
pnp 00:06: [mem 0xfed1c000-0xfed1ffff]
pnp 00:06: [mem 0xfed20000-0xfed8ffff]
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: [io  0x0480-0x04bf] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [mem 0xfec00000-0xfec00fff]
pnp 00:08: [mem 0xfee00000-0xfee00fff]
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0060]
pnp 00:09: [io  0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0b: [io  0x0000-0xffffffff disabled]
pnp 00:0b: [io  0x0a00-0x0adf]
system 00:0b: [io  0x0a00-0x0adf] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xffb00000-0xffbfffff]
pnp 00:0c: [mem 0xfff00000-0xffffffff]
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0d: [mem 0xffc00000-0xffefffff]
system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xe0000000-0xefffffff]
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0x7fffffff]
pnp 00:0f: [mem 0x00000000-0xffffffff disabled]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfebfffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3940k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1323676177.425:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1571
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
vesafb: framebuffer at 0xfb000000, mapped to 0xf3c80000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:b2b0
vesafb: pmi: set display start = c00cb313, set palette = c00cb36e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Checking hibernation image partition UUID=0804154b-954e-4f73-bd4c-f3f48d2580e3
psmouse serio1: ID: 10 00 64
Refined TSC clocksource calibration: 2393.976 MHz.
Switching to clocksource tsc
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 7:466:824
rtc_cmos 00:03: setting system clock to 2011-12-12 07:49:39 UTC (1323676179)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 552k freed
Write protecting the kernel text: 3560k
Write protecting the kernel read-only data: 1636k
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9eff400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9eff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.38.8-desktop-8.mga uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
usb 2-5: new high speed USB device using ehci_hcd and address 2
usb 2-5: New USB device found, idVendor=058f, idProduct=6377
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: Mass Storage Device
usb 2-5: Manufacturer: Generic
usb 2-5: SerialNumber: 920321111113
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-8: new high speed USB device using ehci_hcd and address 4
usb 2-8: New USB device found, idVendor=046d, idProduct=0802
usb 2-8: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 2-8: SerialNumber: 4CCD4C60
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0714, max UDMA/33
ata2.00: applying bridge limits
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.01: ATA-8: ST31000528AS, CC34, max UDMA/133
ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
usb 3-2: new full speed USB device using uhci_hcd and address 2
 sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.01: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H653L 0714 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access     ATA      ST31000528AS     CC34 PQ: 0 ANSI: 5
sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:1:0: [sdb] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
usb 3-2: New USB device found, idVendor=04f9, idProduct=0028
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: HL-2040 series
usb 3-2: Manufacturer: Brother
usb 3-2: SerialNumber: H6J475817
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=04f9, idProduct=0253
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: DCP-J125
usb 4-1: Manufacturer: Brother
usb 4-1: SerialNumber: BROH1F384514
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=0665, idProduct=5161
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB to Serial
usb 8-1: Manufacturer: Cypress Semiconductor
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[141]: starting version 166
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sd 1:0:1:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
generic-usb 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.3-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-5:1.0
usblp2: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0253
usbcore: registered new interface driver usblp
scsi5 : usb-storage 4-1:1.2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: acpi_idle registered with cpuidle
usbcore: registered new interface driver uas
firewire_ohci 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
8139too: 8139too Fast Ethernet driver 0.9.28
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
8139too 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
8139too 0000:01:00.0: eth0: RealTek RTL8139 at 0xf3e92c00, 00:e0:4c:0a:3e:d6, IRQ 17
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Linux video capture interface: v2.00
iTCO_vendor_support: vendor-support=0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
firewire_core: created device fw0: GUID 0011d800016a2718, S400
scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: Attached scsi generic sg4 type 0
scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
scsi 5:0:0:0: Direct-Access     Brother  DCP-J125         1.00 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg7 type 0
sd 5:0:0:0: [sdg] Attached SCSI removable disk
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC1200: BIOS auto-probing.
hda_codec: ALC1200: SKU not ready 0x411111f0
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs:
   dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module  285.05.09  Fri Sep 23 18:53:08 PDT 2011
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
EXT4-fs (sda5): re-mounted. Opts: acl
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
loop: module loaded
Adding 4088504k swap on /dev/sda6.  Priority:-1 extents:1 across:4088504k 
NET: Registered protocol family 10
usbcore: registered new interface driver snd-usb-audio
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ctnetlink v0.93: registering with nfnetlink.
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
eth0: no IPv6 routers present
ip_set: protocol 6
xt_time: kernel timezone is +1300
u32 classifier
    Actions configured
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/133
ata2: EH complete
EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
EXT4-fs (sda7): re-mounted. Opts: acl,commit=0
EXT4-fs (sda12): re-mounted. Opts: acl,commit=0
EXT4-fs (sda8): re-mounted. Opts: acl,commit=0
EXT4-fs (sda9): re-mounted. Opts: acl,commit=0
EXT4-fs (sda11): re-mounted. Opts: acl,commit=0
EXT4-fs (sda10): re-mounted. Opts: acl,commit=0
usb 3-2: USB disconnect, address 2
usblp1: removed
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: New USB device found, idVendor=04f9, idProduct=0028
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: HL-2040 series
usb 3-2: Manufacturer: Brother
usb 3-2: SerialNumber: H6J475817
usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
usb 3-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
ppdev: user-space parallel port driver
ppdev0: no associated port!
usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
usb 4-1: usbfs: process 30720 (xsane) did not claim interface 1 before use
usb 4-1: usbfs: interface 0 claimed by usblp while 'xsane' sets config #1
usb 4-1: usbfs: process 30720 (xsane) did not claim interface 1 before use
sd 4:0:0:0: [sdc] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: detected capacity change from 0 to 1977614336
 sdc: sdc1
WARNING! power/level is deprecated; use power/control instead
usb 2-5: USB disconnect, address 2

Actions: View

Attachments on bug 3698: 1225 | 1707