Attachment 1169 Details for Bug 3584 – The dmesg

The dmesg

dmesg.txt (text/plain), 28.17 KB, created by papoteur on 2011-12-03 16:37:05 CET

(hide)

Description:

Filename:

MIME Type:

Creator: papoteur

Created: 2011-12-03 16:37:05 CET

Size: 28.17 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.1.2-desktop-0.rc1.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sun Nov 20 18:23:33 UTC 2011
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable)
> BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data)
> BIOS-e820: 000000001bfce000 - 000000001c000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI present.
>DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014  01/16/2008
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x1bfc0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 01C000000 mask FFC000000 uncachable
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>found SMP MP-table at [c00ff780] ff780
>initial memory mapped : 0 - 00c00000
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: 0000000000000000-000000001bfc0000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 001bc00000 page 2M
> 001bc00000 - 001bfc0000 page 4k
>kernel direct mapping tables up to 1bfc0000 @ bfa000-c00000
>RAMDISK: 1bbd1000 - 1bfb0000
>ACPI: RSDP 000f9200 00014 (v00 ACPIAM)
>ACPI: RSDT 1bfc0000 00038 (v01 011608 RSDT2051 20080116 MSFT 00000097)
>ACPI: FACP 1bfc0200 00084 (v02 011608 FACP2051 20080116 MSFT 00000097)
>ACPI: DSDT 1bfc0430 03ADF (v01  1ADMY 1ADMY000 00000000 INTL 20051117)
>ACPI: FACS 1bfce000 00040
>ACPI: APIC 1bfc0390 00054 (v01 011608 APIC2051 20080116 MSFT 00000097)
>ACPI: MCFG 1bfc03f0 0003C (v01 011608 OEMMCFG  20080116 MSFT 00000097)
>ACPI: OEMB 1bfce040 00071 (v01 011608 OEMB2051 20080116 MSFT 00000097)
>ACPI: HPET 1bfc3f10 00038 (v01 011608 VIA HPET 20080116 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>447MB LOWMEM available.
>  mapped low ram: 0 - 1bfc0000
>  low ram: 0 - 1bfc0000
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x0001bfc0
>  HighMem  empty
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0001bfc0
>On node 0 totalpages: 114511
>free_area_init_node: node 0, pgdat c06f2740, node_mem_map db851200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 864 pages used for memmap
>  Normal zone: 109664 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x11068201 base: 0xfed00000
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 13 pages/cpu @db400000 s29568 r0 d23680 u4194304
>pcpu-alloc: s29568 r0 d23680 u4194304 alloc=1*4194304
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113615
>Kernel command line: BOOT_IMAGE=linux root=UUID=9a6c087c-6086-4b16-88ac-973f42a0d13d  resume=UUID=c8094227-c339-43ad-8be3-42889f8df175 splash=silent init=/bin/systemd vga=791
>PID hash table entries: 2048 (order: 1, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Initializing CPU#0
>allocated 1833728 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 440856k/458496k available (3729k kernel code, 17188k reserved, 2409k data, 564k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xdc7c0000 - 0xff3fe000   ( 556 MB)
>    lowmem  : 0xc0000000 - 0xdbfc0000   ( 447 MB)
>      .init : 0xc06ff000 - 0xc078c000   ( 564 kB)
>      .data : 0xc04a46f9 - 0xc06fee00   (2409 kB)
>      .text : 0xc0100000 - 0xc04a46f9   (3729 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:2304
>CPU 0 irqstacks, hard=db00e000 soft=db01e000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1196.926 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.85 BogoMIPS (lpj=1196926)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>TOMOYO Linux initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 24k freed
>ACPI: Checking initramfs for custom DSDT
>ACPI: Core revision 20110623
>ftrace: allocating 16680 entries in 33 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Centaur VIA Eden Processor 1200MHz stepping 00
>Performance Events: 
>Brought up 1 CPUs
>Total of 1 processors activated (2393.85 BogoMIPS).
>devtmpfs: initialized
>PM: Registering ACPI NVS region at 1bfce000 (204800 bytes)
>RTC time: 14:58:09, date: 12/03/11
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0200000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xdfffffff]
>pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
>pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
>pci 0000:00:00.0: [1106:0324] type 0 class 0x000600
>pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:00:00.1: [1106:1324] type 0 class 0x000600
>pci 0000:00:00.2: [1106:2324] type 0 class 0x000600
>pci 0000:00:00.3: [1106:3324] type 0 class 0x000600
>pci 0000:00:00.4: [1106:4324] type 0 class 0x000600
>pci 0000:00:00.7: [1106:7324] type 0 class 0x000600
>pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
>pci 0000:00:01.0: supports D1
>pci 0000:00:08.0: [10ec:8139] type 0 class 0x000200
>pci 0000:00:08.0: reg 10: [io  0xe800-0xe8ff]
>pci 0000:00:08.0: reg 14: [mem 0xfcfffc00-0xfcfffcff]
>pci 0000:00:08.0: supports D1 D2
>pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:0f.0: [1106:5324] type 0 class 0x000101
>pci 0000:00:0f.0: reg 20: [io  0xfc00-0xfc0f]
>pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
>pci 0000:00:10.0: reg 20: [io  0xec00-0xec1f]
>pci 0000:00:10.0: supports D1 D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
>pci 0000:00:10.4: reg 10: [mem 0xfcfff800-0xfcfff8ff]
>pci 0000:00:10.4: supports D1 D2
>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.4: PME# disabled
>pci 0000:00:11.0: [1106:8324] type 0 class 0x000601
>pci 0000:00:11.7: [1106:324e] type 0 class 0x000600
>pci 0000:00:13.0: [1106:324b] type 1 class 0x000604
>pci 0000:01:00.0: [1106:3157] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref]
>pci 0000:01:00.0: reg 14: [mem 0xfd000000-0xfdffffff]
>pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
>pci 0000:02:01.0: [1106:3288] type 0 class 0x000403
>pci 0000:02:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
>pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:13.0: PCI bridge to [bus 02-02]
>pci 0000:00:13.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 000000001bfc0000 - 000000001bffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>Switched to NOHz mode on CPU #0
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000d0000-0x000dffff window]
>pnp 00:00: [mem 0x1c000000-0xdfffffff window]
>pnp 00:00: [mem 0xf0000000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [dma 4]
>pnp 00:01: [io  0x0000-0x000f]
>pnp 00:01: [io  0x0081-0x0083]
>pnp 00:01: [io  0x0087]
>pnp 00:01: [io  0x0089-0x008b]
>pnp 00:01: [io  0x008f]
>pnp 00:01: [io  0x00c0-0x00df]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:02: [io  0x0070-0x0071]
>pnp 00:02: [irq 8]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:03: [io  0x0061]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:04: [io  0x00f0-0x00ff]
>pnp 00:04: [irq 13]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:05: [io  0x03f8-0x03ff]
>pnp 00:05: [irq 4]
>pnp 00:05: [dma 0 disabled]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:06: [io  0x02f8-0x02ff]
>pnp 00:06: [irq 3]
>pnp 00:06: [dma 0 disabled]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:07: [io  0x0378-0x037f]
>pnp 00:07: [irq 7]
>pnp 00:07: [dma 0 disabled]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:08: [io  0x0000-0xffffffff disabled]
>pnp 00:08: [io  0x0a60-0x0a61]
>pnp 00:08: [io  0x0a00-0x0a0f]
>pnp 00:08: [io  0x0a20-0x0a2f]
>pnp 00:08: [io  0x0a10-0x0a1f]
>pnp 00:08: [io  0x0a30-0x0a3f]
>pnp 00:08: [io  0x0a40-0x0a4f]
>pnp 00:08: [io  0x0a50-0x0a5f]
>system 00:08: [io  0x0a60-0x0a61] has been reserved
>system 00:08: [io  0x0a00-0x0a0f] has been reserved
>system 00:08: [io  0x0a20-0x0a2f] has been reserved
>system 00:08: [io  0x0a10-0x0a1f] has been reserved
>system 00:08: [io  0x0a30-0x0a3f] has been reserved
>system 00:08: [io  0x0a40-0x0a4f] has been reserved
>system 00:08: [io  0x0a50-0x0a5f] has been reserved
>system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x0010-0x001f]
>pnp 00:09: [io  0x0022-0x003f]
>pnp 00:09: [io  0x0044-0x005f]
>pnp 00:09: [io  0x0062-0x0063]
>pnp 00:09: [io  0x0065-0x006f]
>pnp 00:09: [io  0x0072-0x007f]
>pnp 00:09: [io  0x0080]
>pnp 00:09: [io  0x0084-0x0086]
>pnp 00:09: [io  0x0088]
>pnp 00:09: [io  0x008c-0x008e]
>pnp 00:09: [io  0x0090-0x009f]
>pnp 00:09: [io  0x00a2-0x00bf]
>pnp 00:09: [io  0x00e0-0x00ef]
>pnp 00:09: [io  0x03e0-0x03e7]
>pnp 00:09: [io  0x04d0-0x04d1]
>pnp 00:09: [io  0x0800-0x087f]
>pnp 00:09: [io  0x0400-0x041f]
>pnp 00:09: [io  0x0000-0xffffffff disabled]
>system 00:09: [io  0x03e0-0x03e7] has been reserved
>system 00:09: [io  0x04d0-0x04d1] has been reserved
>system 00:09: [io  0x0800-0x087f] has been reserved
>system 00:09: [io  0x0400-0x041f] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [mem 0xfed00000-0xfed003ff]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:0b: [io  0x0060]
>pnp 00:0b: [io  0x0064]
>pnp 00:0b: [irq 1]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0c: [mem 0xfec00000-0xfec00fff]
>pnp 00:0c: [mem 0xfee00000-0xfee00fff]
>system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0d: [mem 0xe0000000-0xefffffff]
>system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0e: [mem 0x00000000-0x0009ffff]
>pnp 00:0e: [mem 0x000c0000-0x000cffff]
>pnp 00:0e: [mem 0x000e0000-0x000fffff]
>pnp 00:0e: [mem 0x00100000-0x1bffffff]
>pnp 00:0e: [mem 0xfec00000-0xffffffff]
>system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:0e: [mem 0x00100000-0x1bffffff] could not be reserved
>system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
>system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
>pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
>pci 0000:00:13.0: PCI bridge to [bus 02-02]
>pci 0000:00:13.0:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:13.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x1c000000-0xdfffffff]
>pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
>pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
>pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>UDP hash table entries: 256 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 3964k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1322924289.722:1): initialized
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 868
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: mode is 1024x768x16, linelength=2048, pages=20
>vesafb: protected mode interface info at c000:98a3
>vesafb: pmi: set display start = c00c98f1, set palette = c00c9986
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: framebuffer at 0xc0000000, mapped to 0xdc800000, using 3072k, total 32768k
>fbcon: VESA VGA (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>isapnp: Scanning for PnP cards...
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Linux agpgart interface v0.103
>agpgart: Detected VIA CX700 chipset
>agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
>brd: module loaded
>i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Registering the dns_resolver key type
>Using IPI No-Shortcut mode
>isapnp: No Plug & Play device found
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>PM: Checking hibernation image partition UUID=c8094227-c339-43ad-8be3-42889f8df175
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 7:189:990
>rtc_cmos 00:02: setting system clock to 2011-12-03 14:58:10 UTC (1322924290)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Freeing unused kernel memory: 564k freed
>Write protecting the kernel text: 3732k
>Write protecting the kernel read-only data: 1648k
>Refined TSC clocksource calibration: 1196.999 MHz.
>Switching to clocksource tsc
>SCSI subsystem initialized
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>libata version 3.00 loaded.
>via82cxxx 0000:00:0f.0: VIA cx700 (rev 00) IDE UDMA133
>via82cxxx 0000:00:0f.0: IDE controller (0x1106:0x5324 rev 0x00)
>via82cxxx 0000:00:0f.0: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07
>    ide1: BM-DMA at 0xfc08-0xfc0f
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: SAMSUNG HM080GC, ATA DISK drive
>hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
>hdc: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 512KiB
>hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
>hdc: cache flushes supported
> hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 >
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (hdc7): mounted filesystem with ordered data mode
>systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; mageia)
>NET: Registered protocol family 10
>systemd[1]: Set hostname to <localhost>.
>udevd[64]: starting version 173
>systemd-readahead-replay[55]: Bumped block_nr parameter of 22:0 to 16384. This is a temporary hack and should be removed one day.
>modprobe[84]: WARNING: "include /lib/module-init-tools/modprobe.compat" is deprecated, please use /etc/modprobe.d
>modprobe[84]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
>/etc/rc.modules[96]: Loading modules: padlock-aes padlock-sha e_powersaver cpufreq_performance cpufreq_powersave cpufreq_conservative cpufreq_ondemand
>padlock_aes: Using VIA PadLock ACE for AES algorithm.
>padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
>eps: Detected VIA Model D Eden
>eps: Current voltage = 860mV
>eps: Current multiplier = 12
>eps: Highest voltage = 860mV
>eps: Highest multiplier = 12
>eps: Lowest voltage = 844mV
>eps: Lowest multiplier = 4
>systemd[1]: fedora-loadmodules.service: main process exited, code=exited, status=1
>systemd[1]: Unit fedora-loadmodules.service entered failed state.
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>systemd-fsck[73]: /dev/hdc7\xffffffc2\xffffffa0\xffffffa0: propre, 105424/3465216 fichiers, 827947/13837981 blocs
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>EXT3-fs (hdc7): using internal journal
>8139too: 8139too Fast Ethernet driver 0.9.28
>8139too 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>8139too 0000:00:08.0: eth0: RealTek RTL8139 at 0xdc7f6c00, 44:4d:50:09:06:fd, IRQ 16
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: debug port 1
>uhci_hcd: USB Universal Host Controller Interface driver
>ehci_hcd 0000:00:10.4: irq 23, io mem 0xfcfff800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.1.2-desktop-0.rc1.1.mga2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:10.4
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.1.2-desktop-0.rc1.1.mga2 uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 2-1: new low speed USB device number 2 using uhci_hcd
>usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB-PS/2 Optical Mouse
>usb 2-1: Manufacturer: Logitech
>Adding 1726952k swap on /dev/hdc1.  Priority:0 extents:1 across:1726952k 
>snd_hda_intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>hda_intel: position_fix set to 1 for device 1106:3288
>snd_hda_intel 0000:02:01.0: irq 40 for MSI/MSI-X
>snd_hda_intel 0000:02:01.0: setting latency timer to 64
>snd_hda_intel 0000:02:01.0: PCI: Disallowing DAC for device
>autoconfig: line_outs=4 (0x1f/0x1c/0x22/0x23/0x0) type:line
>   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>   hp_outs=1 (0x20/0x0/0x0/0x0/0x0)
>   mono: mono_out=0x0
>   dig-out=0x25/0x0
>   inputs: Mic=0x1d Line=0x1e
>   dig-in=0x26
>ppdev: user-space parallel port driver
>systemd-fsck[657]: /dev/hdc5\xffffffc2\xffffffa0\xffffffa0: propre, 168727/667808 fichiers, 1987191/2668790 blocs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (hdc5): using internal journal
>EXT3-fs (hdc5): mounted filesystem with ordered data mode
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
>generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>rmmod[767]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
>plymouthd[768]: could not write pid file /run/plymouth/pid: No such file or directory
>modprobe[771]: WARNING: "include /lib/module-init-tools/modprobe.compat" is deprecated, please use /etc/modprobe.d
>modprobe[771]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
>systemd-tmpfiles[812]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
>systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
>systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
>service_harddrake[839]: ### Program is starting ###
>service_harddrake[839]: running: dmidecode
>service_harddrake[839]: modified file /etc/sysconfig/harddrake2/kernel
>service_harddrake[839]: modified file /etc/sysconfig/harddrake2/xorg
>service_harddrake[839]: created file /etc/sysconfig/harddrake2/previous_hw
>service_harddrake[839]: launched command: display_driver_helper --check-loaded
>acpid[881]: starting up with proc fs
>hdc: cache flushes supported
>8139too 0000:00:08.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 17
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
>agpgart-via 0000:00:00.0: AGP 3.5 bridge
>agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
>pci 0000:01:00.0: putting AGP V3 device into 8x mode
>eth0: no IPv6 routers present
>loop: module loaded
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>agpgart-via 0000:00:00.0: AGP 3.5 bridge
>agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
>pci 0000:01:00.0: putting AGP V3 device into 8x mode
>

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.2-desktop-0.rc1.1.mga2 (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sun Nov 20 18:23:33 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable)
 BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data)
 BIOS-e820: 000000001bfce000 - 000000001c000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014  01/16/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1bfc0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 01C000000 mask FFC000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-000000001bfc0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001bc00000 page 2M
 001bc00000 - 001bfc0000 page 4k
kernel direct mapping tables up to 1bfc0000 @ bfa000-c00000
RAMDISK: 1bbd1000 - 1bfb0000
ACPI: RSDP 000f9200 00014 (v00 ACPIAM)
ACPI: RSDT 1bfc0000 00038 (v01 011608 RSDT2051 20080116 MSFT 00000097)
ACPI: FACP 1bfc0200 00084 (v02 011608 FACP2051 20080116 MSFT 00000097)
ACPI: DSDT 1bfc0430 03ADF (v01  1ADMY 1ADMY000 00000000 INTL 20051117)
ACPI: FACS 1bfce000 00040
ACPI: APIC 1bfc0390 00054 (v01 011608 APIC2051 20080116 MSFT 00000097)
ACPI: MCFG 1bfc03f0 0003C (v01 011608 OEMMCFG  20080116 MSFT 00000097)
ACPI: OEMB 1bfce040 00071 (v01 011608 OEMB2051 20080116 MSFT 00000097)
ACPI: HPET 1bfc3f10 00038 (v01 011608 VIA HPET 20080116 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
447MB LOWMEM available.
  mapped low ram: 0 - 1bfc0000
  low ram: 0 - 1bfc0000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001bfc0
  HighMem  empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0001bfc0
On node 0 totalpages: 114511
free_area_init_node: node 0, pgdat c06f2740, node_mem_map db851200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 864 pages used for memmap
  Normal zone: 109664 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x11068201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @db400000 s29568 r0 d23680 u4194304
pcpu-alloc: s29568 r0 d23680 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113615
Kernel command line: BOOT_IMAGE=linux root=UUID=9a6c087c-6086-4b16-88ac-973f42a0d13d  resume=UUID=c8094227-c339-43ad-8be3-42889f8df175 splash=silent init=/bin/systemd vga=791
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing CPU#0
allocated 1833728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 440856k/458496k available (3729k kernel code, 17188k reserved, 2409k data, 564k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xdc7c0000 - 0xff3fe000   ( 556 MB)
    lowmem  : 0xc0000000 - 0xdbfc0000   ( 447 MB)
      .init : 0xc06ff000 - 0xc078c000   ( 564 kB)
      .data : 0xc04a46f9 - 0xc06fee00   (2409 kB)
      .text : 0xc0100000 - 0xc04a46f9   (3729 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
CPU 0 irqstacks, hard=db00e000 soft=db01e000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1196.926 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.85 BogoMIPS (lpj=1196926)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110623
ftrace: allocating 16680 entries in 33 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Centaur VIA Eden Processor 1200MHz stepping 00
Performance Events: 
Brought up 1 CPUs
Total of 1 processors activated (2393.85 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 1bfce000 (204800 bytes)
RTC time: 14:58:09, date: 12/03/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0200000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
pci 0000:00:00.0: [1106:0324] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:00.1: [1106:1324] type 0 class 0x000600
pci 0000:00:00.2: [1106:2324] type 0 class 0x000600
pci 0000:00:00.3: [1106:3324] type 0 class 0x000600
pci 0000:00:00.4: [1106:4324] type 0 class 0x000600
pci 0000:00:00.7: [1106:7324] type 0 class 0x000600
pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
pci 0000:00:01.0: supports D1
pci 0000:00:08.0: [10ec:8139] type 0 class 0x000200
pci 0000:00:08.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:00:08.0: reg 14: [mem 0xfcfffc00-0xfcfffcff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:0f.0: [1106:5324] type 0 class 0x000101
pci 0000:00:0f.0: reg 20: [io  0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io  0xec00-0xec1f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfcfff800-0xfcfff8ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:8324] type 0 class 0x000601
pci 0000:00:11.7: [1106:324e] type 0 class 0x000600
pci 0000:00:13.0: [1106:324b] type 1 class 0x000604
pci 0000:01:00.0: [1106:3157] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
pci 0000:02:01.0: [1106:3288] type 0 class 0x000403
pci 0000:02:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:13.0: PCI bridge to [bus 02-02]
pci 0000:00:13.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000001bfc0000 - 000000001bffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x1c000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io  0x0000-0x000f]
pnp 00:01: [io  0x0081-0x0083]
pnp 00:01: [io  0x0087]
pnp 00:01: [io  0x0089-0x008b]
pnp 00:01: [io  0x008f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x00f0-0x00ff]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io  0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io  0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io  0x0378-0x037f]
pnp 00:07: [irq 7]
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:08: [io  0x0000-0xffffffff disabled]
pnp 00:08: [io  0x0a60-0x0a61]
pnp 00:08: [io  0x0a00-0x0a0f]
pnp 00:08: [io  0x0a20-0x0a2f]
pnp 00:08: [io  0x0a10-0x0a1f]
pnp 00:08: [io  0x0a30-0x0a3f]
pnp 00:08: [io  0x0a40-0x0a4f]
pnp 00:08: [io  0x0a50-0x0a5f]
system 00:08: [io  0x0a60-0x0a61] has been reserved
system 00:08: [io  0x0a00-0x0a0f] has been reserved
system 00:08: [io  0x0a20-0x0a2f] has been reserved
system 00:08: [io  0x0a10-0x0a1f] has been reserved
system 00:08: [io  0x0a30-0x0a3f] has been reserved
system 00:08: [io  0x0a40-0x0a4f] has been reserved
system 00:08: [io  0x0a50-0x0a5f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0010-0x001f]
pnp 00:09: [io  0x0022-0x003f]
pnp 00:09: [io  0x0044-0x005f]
pnp 00:09: [io  0x0062-0x0063]
pnp 00:09: [io  0x0065-0x006f]
pnp 00:09: [io  0x0072-0x007f]
pnp 00:09: [io  0x0080]
pnp 00:09: [io  0x0084-0x0086]
pnp 00:09: [io  0x0088]
pnp 00:09: [io  0x008c-0x008e]
pnp 00:09: [io  0x0090-0x009f]
pnp 00:09: [io  0x00a2-0x00bf]
pnp 00:09: [io  0x00e0-0x00ef]
pnp 00:09: [io  0x03e0-0x03e7]
pnp 00:09: [io  0x04d0-0x04d1]
pnp 00:09: [io  0x0800-0x087f]
pnp 00:09: [io  0x0400-0x041f]
pnp 00:09: [io  0x0000-0xffffffff disabled]
system 00:09: [io  0x03e0-0x03e7] has been reserved
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x0800-0x087f] has been reserved
system 00:09: [io  0x0400-0x041f] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x1bffffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x1bffffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
pci 0000:00:13.0: PCI bridge to [bus 02-02]
pci 0000:00:13.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x1c000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3964k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1322924289.722:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 868
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:98a3
vesafb: pmi: set display start = c00c98f1, set palette = c00c9986
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xc0000000, mapped to 0xdc800000, using 3072k, total 32768k
fbcon: VESA VGA (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart: Detected VIA CX700 chipset
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
PM: Checking hibernation image partition UUID=c8094227-c339-43ad-8be3-42889f8df175
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 7:189:990
rtc_cmos 00:02: setting system clock to 2011-12-03 14:58:10 UTC (1322924290)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 564k freed
Write protecting the kernel text: 3732k
Write protecting the kernel read-only data: 1648k
Refined TSC clocksource calibration: 1196.999 MHz.
Switching to clocksource tsc
SCSI subsystem initialized
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
libata version 3.00 loaded.
via82cxxx 0000:00:0f.0: VIA cx700 (rev 00) IDE UDMA133
via82cxxx 0000:00:0f.0: IDE controller (0x1106:0x5324 rev 0x00)
via82cxxx 0000:00:0f.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07
    ide1: BM-DMA at 0xfc08-0xfc0f
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: SAMSUNG HM080GC, ATA DISK drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
 hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 >
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hdc7): mounted filesystem with ordered data mode
systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; mageia)
NET: Registered protocol family 10
systemd[1]: Set hostname to <localhost>.
udevd[64]: starting version 173
systemd-readahead-replay[55]: Bumped block_nr parameter of 22:0 to 16384. This is a temporary hack and should be removed one day.
modprobe[84]: WARNING: "include /lib/module-init-tools/modprobe.compat" is deprecated, please use /etc/modprobe.d
modprobe[84]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
/etc/rc.modules[96]: Loading modules: padlock-aes padlock-sha e_powersaver cpufreq_performance cpufreq_powersave cpufreq_conservative cpufreq_ondemand
padlock_aes: Using VIA PadLock ACE for AES algorithm.
padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
eps: Detected VIA Model D Eden
eps: Current voltage = 860mV
eps: Current multiplier = 12
eps: Highest voltage = 860mV
eps: Highest multiplier = 12
eps: Lowest voltage = 844mV
eps: Lowest multiplier = 4
systemd[1]: fedora-loadmodules.service: main process exited, code=exited, status=1
systemd[1]: Unit fedora-loadmodules.service entered failed state.
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
systemd-fsck[73]: /dev/hdc7\xffffffc2\xffffffa0\xffffffa0: propre, 105424/3465216 fichiers, 827947/13837981 blocs
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
EXT3-fs (hdc7): using internal journal
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
8139too 0000:00:08.0: eth0: RealTek RTL8139 at 0xdc7f6c00, 44:4d:50:09:06:fd, IRQ 16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:10.4: irq 23, io mem 0xfcfff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.2-desktop-0.rc1.1.mga2 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.2-desktop-0.rc1.1.mga2 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 2-1: new low speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Optical Mouse
usb 2-1: Manufacturer: Logitech
Adding 1726952k swap on /dev/hdc1.  Priority:0 extents:1 across:1726952k 
snd_hda_intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
hda_intel: position_fix set to 1 for device 1106:3288
snd_hda_intel 0000:02:01.0: irq 40 for MSI/MSI-X
snd_hda_intel 0000:02:01.0: setting latency timer to 64
snd_hda_intel 0000:02:01.0: PCI: Disallowing DAC for device
autoconfig: line_outs=4 (0x1f/0x1c/0x22/0x23/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x20/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x25/0x0
   inputs: Mic=0x1d Line=0x1e
   dig-in=0x26
ppdev: user-space parallel port driver
systemd-fsck[657]: /dev/hdc5\xffffffc2\xffffffa0\xffffffa0: propre, 168727/667808 fichiers, 1987191/2668790 blocs
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hdc5): using internal journal
EXT3-fs (hdc5): mounted filesystem with ordered data mode
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
rmmod[767]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
plymouthd[768]: could not write pid file /run/plymouth/pid: No such file or directory
modprobe[771]: WARNING: "include /lib/module-init-tools/modprobe.compat" is deprecated, please use /etc/modprobe.d
modprobe[771]: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
systemd-tmpfiles[812]: [/usr/lib/tmpfiles.d/legacy.conf:22] Unknown group 'lock'.
systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1
systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
service_harddrake[839]: ### Program is starting ###
service_harddrake[839]: running: dmidecode
service_harddrake[839]: modified file /etc/sysconfig/harddrake2/kernel
service_harddrake[839]: modified file /etc/sysconfig/harddrake2/xorg
service_harddrake[839]: created file /etc/sysconfig/harddrake2/previous_hw
service_harddrake[839]: launched command: display_driver_helper --check-loaded
acpid[881]: starting up with proc fs
hdc: cache flushes supported
8139too 0000:00:08.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
agpgart-via 0000:00:00.0: AGP 3.5 bridge
agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
pci 0000:01:00.0: putting AGP V3 device into 8x mode
eth0: no IPv6 routers present
loop: module loaded
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
agpgart-via 0000:00:00.0: AGP 3.5 bridge
agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
pci 0000:01:00.0: putting AGP V3 device into 8x mode

Actions: View

Attachments on bug 3584: 1168 | 1169 | 1170 | 1171